Transcend TS8GMP330 - Manuals

Player Controls ︱ A High-speed USB 2.0 Connector B White Monochrome OLED Display C A-B Repeat / REC D Menu Button E Hold Switch F Volume Up G Play / Pause / Power H Next / Fast-Forward I Volume Down J Previous / Rewind K Reset Button L Microphone M Headphone Jack N Lanyard Attachment Loop O Line-In ...

Music Playback Screen ︱ ICON INDICATION A Record Source Built-in Microphone, FM Radio or Line-In B VAD Indicates Voice Activity Detection is enabled C Record Quality Indicates the Record Quality, Low Quality, Medium Quality, High Quality D Repeat Mode Normal, Repeat One, Repeat All, Shuffle, Normal ...

Basic Operation ︱ Charging the Battery Remove the MP330’s cap and plug its USB connector directly into an available USB port on your desktop or notebook computer. The MP330’s internal Li-ion battery will begin charging. A battery charging indicator will appear in the upper right hand corner of the p...

Hold When the switch is enabled, all of the MP330’s buttons will be disabled, and cannot accidentally be pressed while in your pocket. Reset If the MP330 is not functioning properly, you can reboot by pressing RESET for 3 to 5 seconds. 13

MUSIC Mode ︱ Before buying DRM (Digital Rights Management) protected music online, please be advised that the MP330 only supports WMA-DRM10 file protection. Playing Audio Files 1. Press and hold the button to power ON the unit. The Main Menu will appear. If the MP330 is already on, press the button ...

2. Navigate to the file you want to delete with the / and / buttons. 3. With the file highlighted, press the button and select “Delete.” A confirmation will appear. Click 4. Use the button to highlight “yes” and press to permanently delete the file. Playlists For quick and easy playback of your favo...

RADIO Mode ︱ Listening to the Radio 1. Plug in the earphones . (Earphones must be plugged-in to listen to the Radio) 2. Press the button to enter the Main Menu. 3. Use the / buttons to select the “ RADIO ” and press . 4. The current FM radio frequency will be displayed. The first time you use the Ra...

RECORD Mode ︱ There are two ways to use the player’s record functions: Press the button to open the Main Menu and select RECORD. Press and hold the button for 2 seconds in any mode. Hold The MP330 supports three different types of recording: Voice Recording Line-in Recording FM Radio Recording All r...

For best results, try to position the MP330’s Microphone as close as possible to the source of the sound or voice you are recording. Line-in Recording The MP330’s default record source is its built-in microphone. To enable Line-in recording, please see “ Settings / REC Settings / Record Source ” 1. ...

Settings ︱ 1. Press the button to enter the Main Menu. 2. Use the or buttons to select “ SETTINGS ” and press . 3. To exit the SETTINGS menu, press the button. Equalizer (EQ) Mode There are seven equalizer modes to choose from: Normal , Pop , Rock , Classical , Jazz , Bass , and User EQ 1. Use the /...

Repeat Mode There are seven Repeat modes to choose from: Normal (plays all music files available one time, in consecutive order) Repeat One (continuously repeats the current song), Repeat All (continuously repeats playback of all music files available, in consecutive order) Shuffle (continuously rep...

Contrast The contrast of the OLED display can be adjusted for brighter or darker text. Higher contrast levels will drain the battery faster, while lowering the contrast level will provide better battery life. 1. Use / to select “ Contrast ” and press . 2. Use / to increase or decrease contrast. Pres...

2. Use / to select a Power Off delay time and press . You can choose from “ Disable ”, “ 15 min ”, “ 30 min ”, or “ 60 min ”. When the selected time is reached, the MP330 will automatically power off Date / Time Settings This option lets you adjust the local date and time. 1. Use / to select “ Date/...

Driver Installation ︱ Driver Installation for Windows ® 2000, XP and Vista No drivers are required. These Windows ® Operating Systems have built-in drivers to support the MP330. Plug your MP330 into an available USB port and Windows ® will install the necessary files. A “ Removable Disk ” drive with...

Connecting to a Computer ︱ If you are using Windows Media Player 10 and want to play WMA-DRM10 music files, you must set the MP330’s Music Transfer Mode to MTP to transfer and synchronize music files between the computer and your MP330. Transferring Files to the MP330 If you want to use your MP330 t...

Disconnecting from a Computer Always follow the procedures listed below before you disconnect the MP330. Disconnecting the MP330 in Windows ® 2000, XP and Vista 1. Select the Hardware icon in the system tray. 2. The Safely Remove Hardware pop-up window will appear. Select it to continue. 3. A messag...

Troubleshooting ︱ If a problem occurs with your MP330, please first check the information listed below before taking your MP330 for repair. If you are unable to remedy a problem from the following hints, please consult your dealer, service center, or local Transcend branch office. We also have FAQ a...

Cannot RECORD voice, Line-In, or the FM radio To make sure recorded files do not get lost, two safety mechanisms are built into the MP330: • If remaining battery capacity is less than 10%, you cannot enter the RECORD Mode. • While recording, if the remaining battery capacity goes below 10% the MP330...

35 If your MP330 displays an “Insufficient Power” message, this means the device supplying USB power to your digital music player is not outputting stable or adequate voltage to charge the player’s internal battery (usually a result of a USB hub or extension cable used. This message does not indicat...

Transcend Limited Warranty ︱ “Above and Beyond” is the standard we set ourselves for customer service at Transcend. We consistently position ourselves to be significantly above the industry norm, which is all part of our commitment to Customer Satisfaction. All Transcend information, Inc. (Transcend...