Transcend StoreJetTM 3.5 - Manuals

Product Overview Figure 1. StoreJet 3.5 Screws x 2 Power ON/OFF Switch Power Jack LED USB B-Type Port Product Overview 4

Installing a Hard Drive Your StoreJet ™ 3.5 HDD Enclosure is capable of supporting an IDE, or a SATA Hard Disk Drive. It is IMPORTANT! that you match and install the correct Hard Drive to the correct enclosure. Installing a Hard Drive If you purchased a Transcend StoreJet ™ 3.5 HDD Enclosure that do...

3. IDE Connection: Carefully line up and plug in the IDE connector on the control board to the hard drive. Do NOT force the IDE connector into the hard drive and do NOT insert the connector at an angle, otherwise you may damage it. After you have connected the control board, attach the power cable t...

6. Carefully reinsert the IDE/SATA adapter and its connected 3.5” hard drive into the StoreJet ™ 3.5 and reattach the screws to the top cover. Figure 7. Reinsert the IDE/SATA adapter plus drive and reattach the screws I nstalling a Hard Drive 7

Driver Installation WARNING! The StoreJet ™ 3.5’s internal hard drive comes formatted for NTFS. Windows ® 98SE CANNOT support the NTFS file system, please reformat the hard drive to the FAT file system, see the “ Formatting the Hard Drive ” section. Driver Installation for Windows  98SE 1. Put the ...

an available USB port. Connect the Power Adapter to the StoreJet ™ 3.5 enclosure’s power jack and connect the power cable to the adapter, then turn on the unit’s power switch. The StoreJet ™ 3.5 ’s LED will light up. The “New Hardware Found” dialogue box will appear. Figure 11. Found New Hardware 5....

Connecting to a Computer If you want to use the StoreJet ™ 3.5 as an External Hard Disk Drive to upload/download data to, or from your computer you need to connect it to a USB port on the computer using the provided USB B-Type to USB A-Type cable. WARNING! If using Windows ® 98SE, please ensure you ...

Disconnecting from a Computer NEVER disconnect the StoreJet ™ from a Computer, or turn off the power switch when its LED is flashing. Removing the StoreJet ™ 3.5 in Windows  98SE Unplug your StoreJet ™ 3.5 from your system directly when data is not transferring and turn off the power switch. Removi...

Troubleshooting If a problem occurs with your StoreJet ™ 3.5 , please first check the information listed below before taking your StoreJet ™ 3.5 for repair. If you are unable to remedy a problem from the following hints, please consult your dealer, service center, or local Transcend branch office. W...

Cannot back up my Mac ™ The StoreJet ™ 3.5 ’s internal hard drive comes formatted for NTFS. If you want to backup a Mac computer you will need to format the drive for HFS+ using the Mac Disk Utility. Cannot detect the StoreJet ™ 3.5 in Windows ® 98SE The StoreJet ™ 3.5’s internal hard drive comes fo...

Specifications • Size (L x W x H): 198.5mm × 123.4mm × 35mm • Weight: Max. 450g (without hard drive) • Storage Media: 3.5 inch IDE, or SATA Hard Disk Drive • Power Supply: AC input: 100V-240V DC output: 12V/5V Switching Power Adapter • Max. Transfer Speeds: 480Mbits (60MB) per second • Operating Tem...

Transcend Limited Warranty “Above and Beyond” is the standard we set ourselves for customer service at Transcend. We consistently position ourselves to be significantly above the industry norm, which is all part of our commitment to Customer Satisfaction. All Transcend information, Inc. (Transcend) ...

Terminology adapter .....................................................................................................................................................6, 7 Device that is used to connect one hardware device to another without a loss in function. CD.....................................

USB A-Type ....................................................................................................................................... 2, 4, 11 Normal sized Universal Serial Bus connecter, or port. USB B-Type ..................................................................................