TP-Link TLSG1024 - Manuals

TP-Link TLSG1024 Switch – User Manual in PDF format online.

Manuals:

User Manual

User Manual TP-Link TLSG1024

Summary

Page 3 - About this Installation Guide; Chapter 1 Introduction; This chapter describes the external components of the switch.; Chapter 2 Installation; This chapter illustrates how to install the switch.; Chapter 3 Connection; Audience; notice icons that are used throughout this guide.; Related Document

About this Installation Guide This Installation Guide describes the hardware characteristics, installation methods and the points that should be attended to during installation. This Installation Guide is structured as follows: Chapter 1 Introduction This chapter describes the external components of...

Page 4 - Contents; Chapter 1 Introduction ––––––––––––––––––––––– 1

Contents Chapter 1 Introduction ––––––––––––––––––––––– 1 1.1 Product Overview ............................................................. 1 1.2 Appearance ........................................................................ 1 Chapter 2 Installation –––––––––––––––––––––––– 9 2.1 Package Conte...

Page 5 - Unmanaged/Easy Smart Rackmountable Switches; Chapter 1 Introduction; Product Overview; Front Panel; The front panel of TL-SG1008 is shown as the following figure.; The front panel of TL-SG1008MP is shown as the following figure.

1 Unmanaged/Easy Smart Rackmountable Switches Introduction Chapter 1 Introduction 1.1 Product Overview The Unmanaged/Easy Smart Switch provides you with a low-cost, easy-to-use, high-performance, seamless, and standard upgrade to improve your network to 100 Mbps or 1000 Mbps.TL-SG1008MP/TL-SG1016PE/...

Page 6 - The front panel of TL-SF1016 is shown as the following figure.; The front panel of TL-SF1016DS is shown as the following figure.; The front panel of TL-SG1016 is shown as the following figure.; The front panel of TL-SG1016D is shown as the following figure.

2 Unmanaged/Easy Smart Rackmountable Switches Introduction The front panel of TL-SF1016 is shown as the following figure. Figure 1-3 Front Panel of TL-SF1016 10/100Mbps RJ45 Port LEDs The front panel of TL-SF1016DS is shown as the following figure. Figure 1-4 Front Panel of TL-SF1016DS 10/100Mbps RJ...

Page 7 - The front panel of TL-SG1016S is shown as the following figure.; The front panel of TL-SG1016DE is shown as the following figure.; The front panel of TL-SG1016PE is shown as the following figure.; The front panel of TL-SF1024 is shown as the following figure.

3 Unmanaged/Easy Smart Rackmountable Switches Introduction The front panel of TL-SG1016S is shown as the following figure. Figure 1-7 Front Panel of TL-SG1016S 10/100/1000Mbps RJ45 Port LEDs The front panel of TL-SG1016DE is shown as the following figure. Figure 1-8 Front Panel of TL-SG1016DE Reset ...

Page 8 - The front panel of TL-SF1024D is shown as the following figure.; The front panel of TL-SG1024 is shown as the following figure.; The front panel of TL-SG1024D is shown as the following figure.; The front panel of TL-SG1024S is shown as the following figure.

4 Unmanaged/Easy Smart Rackmountable Switches Introduction The front panel of TL-SF1024D is shown as the following figure. Figure 1-11 Front Panel of TL-SF1024D 10/100Mbps RJ45 Port LEDs The front panel of TL-SG1024 is shown as the following figure. Figure 1-12 Front Panel of TL-SG1024 10/100/1000Mb...

Page 9 - The front panel of TL-SG1024DE is shown as the following figure.; The front panel of TL-SF1048 is shown as the following figure.; The front panel of TL-SG1048 is shown as the following figure.; The front panel of TL-SG1218MPE is shown as the following figure.

5 Unmanaged/Easy Smart Rackmountable Switches Introduction The front panel of TL-SG1024DE is shown as the following figure. Figure 1-15 Front Panel of TL-SG1024DE Reset 10/100/1000Mbps RJ45 Port LEDs The front panel of TL-SF1048 is shown as the following figure. Figure 1-16 Front Panel of TL-SF1048 ...

Page 11 - ports 1 to 16 can also provide power for PDs.; SFP Port; 000M SFP module connection only.

7 Unmanaged/Easy Smart Rackmountable Switches Introduction LED Indication PoE Max On: Total power supply is between 146 W and 153 W. No power may be supplied if additional PDs are connected. Flashing: Total power supply is equal to or greater than 153 W. Off: Total power supply is less than 146 W. N...

Page 12 - Only TL-SG1016PE and TL-SG1218MPE has a kensington security slot.; Grounding Terminal; You should use the provided power cord.

8 Unmanaged/Easy Smart Rackmountable Switches Introduction ■ Rear Panel The rear panel is shown as the following figure. Here we take TL-SG1016PE as an example. Figure 1-19 Rear Panel Grounding Terminal Power Socket Kensington Security Slot Kensington Security Slot Secure the lock (not provided) int...

Page 13 - Chapter 2 Installation; Package Contents; Safety Precautions; Keep the power off during the installation.

9 Unmanaged/Easy Smart Rackmountable Switches Installation Chapter 2 Installation 2.1 Package Contents Make sure that the package contains the following items. If any of the listed items is damaged or missing, contact your distributor. One Switch One Resource CD One Power Cord This installation Guid...

Page 14 - Site Requirements; for the device, check the following table.

10 Unmanaged/Easy Smart Rackmountable Switches Installation ■ Site Requirements Temperature/Humidity 40°C 0°C Keep the equipment room at an appropriate level of temperature and humidity. Too much or too little humidit y may lead to bad insulation, leakage of electricit y, mechanical proper t y chang...

Page 15 - Installation Site; Installation Tools; Desktop Installation

11 Unmanaged/Easy Smart Rackmountable Switches Installation Extremely high voltage currents can be produced instantly when lightning occurs and the air in the electric discharge path can be instantly heated up to 20,000 °C . As this instant current is strong enough to damage electronic devices, more...

Page 16 - illustrated in the following figure.; brackets to the rack, as illustrated in the following figure.; Leave 5 to 10 cm gaps around the devices for air circulation.

12 Unmanaged/Easy Smart Rackmountable Switches Installation Figure 2-1 Desktop Installation Feet Bottom of the Device Notch ■ Rack Installation To install the device in an EIA standard-sized, 19-inch rack, follow the instructions described below:1. Check the efficiency of the grounding system and th...

Page 17 - Chapter 3 Connection; Verify Installation; After completing the installation, verify the following items:

13 Unmanaged/Easy Smart Rackmountable Switches Connection Chapter 3 Connection 3.1 Ethernet Port Connect an Ethernet port of the switch to the computer by RJ45 cable as the following figure shows. Figure 3-1 Connecting the RJ45 Port RJ45 Port RJ45 Cable 3.2 SFP Port The following figure demonstrates...

Page 18 - The power socket, device and rack are well grounded.; your region may differ from the figures above.; Accessing the Switch; (Graphical User Interface) or using the Configuration Utility.; Using the Web-Based GUI

14 Unmanaged/Easy Smart Rackmountable Switches Connection ■ The power socket, device and rack are well grounded. ■ The device is correctly connected to other network devices. 3.4 Power On Plug the negative connector of the provided power cord into the power socket of the device and plug the positive...

Page 19 - automatically from the DHCP server.; Enter; as both user name and password.; Using the Configuration Utility

15 Unmanaged/Easy Smart Rackmountable Switches Connection 2. Configure IP address on your PC to make sure the switch and PC are in the same subnet. ■ If the switch uses an IP address assigned by a DHCP server, set your PC to obtain an IP address automatically from the DHCP server. ■ If the switch us...

Page 20 - Appendix A Troubleshooting; What could I do if I forgot the username and password of the Switch?; name and password are both; admin; What should I do if I cannot access the web management page?; Please try the following:; check whether the LED status is on. By default, the LED status is on.

16 Appendix A Troubleshooting Unmanaged/Easy Smart Rackmountable Switches Appendix A Troubleshooting Q1. What could I do if I forgot the username and password of the Switch? With the switch powered on, press the Reset button for at least 5 seconds to reset the system. The system will be reset to the...

Page 21 - Appendix B Specifications

17 Appendix B Specifications Unmanaged/Easy Smart Rackmountable Switches Appendix B Specifications Item Content Standards IEEE 802.3i, IEEE 802.3u, IEEE 802.3xIEEE 802.3ab (except TL-SF1016/ TL-SF1016DS/ TL-SF1024/ TL-SF1024D/ TL-SF1048)I E E E 8 0 2 . 1 p ( fo r T L- SG 1 0 0 8 / T L- SG 1 0 0 8 M ...

Page 23 - FCC Compliance Information Statement; Product Name: Unmanaged/Easy Smart Rackmountable Switch

FCC Compliance Information Statement Product Name: Unmanaged/Easy Smart Rackmountable Switch Model Number: TL-SG1008/TL-SG1008MP/TL-SF1016/TL-SF1016DS/TL-SG1016/TL-SG1016D/TL-SG1016S/TL-SG1016DE/TL-SG1016PE/TL-SF1024/TL-SF1024D/TL-SG1024/TL-SG1024D/TL-SG1024S/TL-SG1024DE/TL-SF1048/TL-SG1048/TL-SG121...

Page 24 - TP-Link USA Corporation; , has determined that the equipment shown as above has been; CE Mark Warning; ) This device may not cause interference.

We, TP-Link USA Corporation , has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2019/11/13 CE Mark...

Page 25 - BSMI Notice

BSMI Notice 安全諮詢及注意事項 ■ ■ 請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品 . ■ ■ 清潔本產品之前請先拔掉電源線 . 請勿使用液體、噴霧清潔劑或濕布進行清潔 . ■ ■ 注意防潮，請勿將水或其他液體潑灑到本產品上 . ■ ■ 插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口 . ■ ■ 請勿將本產品置放於靠近熱源的地方 . 除非有正常的通風，否則不可放在密閉位置中 . ■ ■ 請不要私自打開機殼，不要嘗試自行維修本產品，請由授權的專業人士進行此項工作 . 此為甲類資訊技術設備，于居住環境中使用時，可能會造成射頻擾動，在此種情況...

Page 26 - Safety Information; Keep■the■device■away■from■water,■fire,■humidity■or■hot■environments.; Explanation of the symbols on the product label

Safety Information ■ ■ Keep■the■device■away■from■water,■fire,■humidity■or■hot■environments. ■ ■ Do■not■attempt■to■disassemble,■repair,■or■modify■the■device. ■ ■ Place■the■device■with■its■bottom■surface■downward. Please read and follow the above safety information when operating the device. We cannot...

Page 27 - COPYRIGHT & TRADEMARKS; Specifications are subject to change without notice.

COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form ...