Toyota Camry HV- Manuals

TABLE OF CONTENTS 10 Camry_Navi_U 1. BASIC OPERATION ...................... 198 QUICK REFERENCE .......................... 198 MAP SCREEN OPERATION ............... 201 MAP SCREEN INFORMATION ........... 207 TRAFFIC INFORMATION.................... 211 2. DESTINATION SEARCH ............... 214 DESTINA...

1 11 Camry_Navi_U 1 2 3 4 5 6 7 8 9 1. OVERVIEW BUTTONS ................. 12 2. “Apps” SCREEN .......................... 14 3. HOME SCREEN ............................ 16 STATUS DISPLAY................................. 18 1. “Setup” SCREEN ......................... 20 1. REGISTERING HOME ..............

14 1. BASIC FUNCTION Camry_Navi_U 2. “Apps” SCREEN Press the “APPS” button to display the “Apps” screen.

16 1. BASIC FUNCTION Camry_Navi_U 3. HOME SCREEN  Three-way split screen Press the “HOME” button to display the home screen. The home screen can display multiple information screens, such as the audio sys-tem screen, hands-free screen and navigation screen, simultaneously. Whenhands-free mode is se...

18 1. BASIC FUNCTION Camry_Navi_U STATUS DISPLAY The condition of the Bluetooth ® connection, as well as the level of reception and the amount of cellular phone battery charge left, are displayed on the status dis-play. No. Indicators Conditions The condition ofthe Bluetooth ® connection (Gray) (Blu...

20 2. QUICK REFERENCE Camry_Navi_U 1. “Setup” SCREEN The items shown on the “Setup” screen can be set. Press the “APPS” button, then select “Setup” to display the “Setup” screen. 2. QUICK REFERENCE

22 3. NAVIGATION OPERATION Camry_Navi_U 1. REGISTERING HOME* Press the “APPS” button. Select “Navigation”. Select “Dest.”. Select “Go Home”. Select “Yes”. There are different kinds of meth-ods to search for your home.(  P.214) *: With navigation function 1 2 3 4 5 6 3. NAVIGATION OPERATION

23 3. NAVIGATION OPERATION QUI CK GUI D E Camry_Navi_U 1 Select “Enter”. Select “OK”. Registration of home is complete.  Registering home in a different way  P.242  Editing the name, location, phone num-ber and icon  P.242  Setting home as the destination  P.217 7 8

29 4. FUNCTION INDEX QUI CK GUI D E Camry_Navi_U 1  Useful functions Information Page Displaying vehicle maintenance* 66 Hands-free system (for cellular phone) Page Registering/connecting Bluetooth ® phone 42 Making a call on a Bluetooth ® phone 162 Receiving a call on the Bluetooth ® phone 167 Voi...

2 31 Camry_Navi_U 3 4 5 6 7 8 9 1 2 1. INITIAL SCREEN ........................... 32 2. TOUCH SCREEN GESTURES.................................. 34 3. TOUCH SCREEN OPERATION ................................ 35 4. HOME SCREEN OPERATION ...... 36 5. ENTERING LETTERS AND NUMBERS/LIST SCREEN OPERATION .....

32 Camry_Navi_U 1. BASIC INFORMATION BEFORE OPERATION 1. INITIAL SCREEN 1 When the engine switch is in the “ACC”or “ON” position, the initial screen willbe displayed and the system will beginoperating. (Vehicles without a smartkey system)When the “POWER” <“ENGINESTART STOP”> switch is in ACCES...

33 1. BASIC INFORMATION BEFORE OPERATION Camry_Navi_U BAS IC F UNCT IO N 2 1 Press and hold the “PWR/VOL” knob for 3 seconds or more. RESTARTING THE SYSTEM When system response is extremelyslow, the system can be restarted.

34 1. BASIC INFORMATION BEFORE OPERATION Camry_Navi_U 2. TOUCH SCREEN GESTURES Operations are performed by touching the touch screen directly with your finger. Operation method Outline Main use Touch Quickly touch and releaseonce. Changing and selecting various set-tings Drag* 1 Touch the screen wit...

35 1. BASIC INFORMATION BEFORE OPERATION Camry_Navi_U BAS IC F UNCT IO N 2 3. TOUCH SCREEN OPERATION This system is operated mainly by thebuttons on the screen. (Referred to asscreen buttons in this manual.)  When a screen button is touched, abeep sounds. (To set the beep sound,see page 57.) NOTICE...

36 1. BASIC INFORMATION BEFORE OPERATION Camry_Navi_U 4. HOME SCREEN OPERATION 1 Press the “HOME” button. 2 “Home” screen is displayed.  When a screen is selected, the selectedscreen will change to a full-screen display. 1 Select . 2 Select “Home Screen” .  Select “Two Panel” or “Three Panel” . 3 ...

37 1. BASIC INFORMATION BEFORE OPERATION Camry_Navi_U BAS IC F UNCT IO N 2 5. ENTERING LETTERS AND NUMBERS/LIST SCREEN OPERATION  On certain letter entry screens, letters canbe entered in upper or lower case. : Select to enter in lower case. : Select to enter in upper case. 1 Enter characters and s...

39 1. BASIC INFORMATION BEFORE OPERATION Camry_Navi_U BAS IC F UNCT IO N 2 1 Select “Sort” . 2 Select the desired sorting criteria. 1 Select the desired character jump but-tons. SORTING The order of a list displayed on thescreen can be sorted in the order ofdistance from the current location,date, c...

40 1. BASIC INFORMATION BEFORE OPERATION Camry_Navi_U 6. SCREEN ADJUSTMENT 1 Press the “APPS” button. 2 Select “Setup” . 3 Select “Display” . 4 Select the items to be set. 1 Select “Day Mode” . The contrast and brightness of thescreen display and the image of thecamera display can be adjusted. Thesc...

41 1. BASIC INFORMATION BEFORE OPERATION Camry_Navi_U BAS IC F UNCT IO N 2 1 Select “General” or “Camera” . 2 Select the desired item.  General  Camera 3 Select “OK” . ADJUSTING THE CONTRAST/BRIGHTNESS The contrast and brightness of thescreen can be adjusted according tothe brightness of your surr...

42 Camry_Navi_U 2. Bluetooth ® SETTINGS 1. REGISTERING/CONNECTING Bluetooth ® DEVICE 1 Turn the Bluetooth ® connection setting of your cellular phone on.  This function is not available when Bluetooth ® connection setting of your cel- lular phone is set to off. 2 Press the “APPS” button. 3 Select “...

44 2. Bluetooth ® SETTINGS Camry_Navi_U PROFILES This system supports the following services. Bluetooth ® Device Spec. Function Require- ments Recommen- dations Bluetooth ® Phone/Bluetooth ® Audio Player Bluetooth ® Specification Registering a Bluetooth ® de- vice Ver. 2.0 Ver. 3.0 +EDR Bluetooth ® ...

45 2. Bluetooth ® SETTINGS Camry_Navi_U BAS IC F UNCT IO N 2 Bluetooth is a registered trademark of Bluetooth SIG, Inc.

46 2. Bluetooth ® SETTINGS Camry_Navi_U  U.S.A. (Without navigation function)  Canada (Without navigation function) CERTIFICATION  FCC ID: AJDK066  This device complies with part 15 of theFCC Rules. Operation is subject to thefollowing two conditions: (1) This devicemay not cause harmful interfe...

48 2. Bluetooth ® SETTINGS Camry_Navi_U  Canada (With navigation function) *: Bluetooth is a registered trademark of Bluetooth SIG, Inc.  Mexico  IC: 2024B-FT0044D  This device complies with IndustryCanada licence-exempt RSS stan-dard(s). Operation is subject to the fol-lowing two conditions: (1...

49 2. Bluetooth ® SETTINGS Camry_Navi_U BAS IC F UNCT IO N 2 2. SETTING Bluetooth ® DETAILS 1 Press the “APPS” button. 2 Select “Setup” . 3 Select “Bluetooth*” . 4 Select the desired item to be set. *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. “Bluetooth* Setup” SCREEN Function Page...

50 2. Bluetooth ® SETTINGS Camry_Navi_U  From the phone/message settingsscreen 1 Press the “APPS” button. 2 Select “Setup” . 3 Select “Phone” . 4 Select “Connect Phone” .  From the status display 1 Select status display area on thescreen. 1 Display the “Bluetooth* Setup” screen.(  P.49) 2 Select ...

51 2. Bluetooth ® SETTINGS Camry_Navi_U BAS IC F UNCT IO N 2  For details about operating the Bluetooth ® device, see the manual that comes with it.  To cancel the registration, select “Can- cel” . 4 Register the Bluetooth ® device using your Bluetooth ® device.  A PIN-code is not required for SS...

52 2. Bluetooth ® SETTINGS Camry_Navi_U 1 Display the “Bluetooth* Setup” screen.(  P.49) 2 Select the device to be connected.  Supported profile icons will be displayed. : Phone : Audio player : Phone/Entune App Suite service (With navigation function)  The profile icon for a currently connectedd...

54 2. Bluetooth ® SETTINGS Camry_Navi_U 1 Display the “Bluetooth* Setup” screen.(  P.49) 2 Select the desired device to be edited. 3 Select “Device Info” . 4 Confirm and change the Bluetooth ® device information. *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. EDITING THE Bluetooth ® ...

55 2. Bluetooth ® SETTINGS Camry_Navi_U BAS IC F UNCT IO N 2 1 Select “Device Name” . 2 Enter the name and select “OK” . 1 Select “Connect Audio Player From” . 2 Select the desired connection method. “Vehicle” : Select to connect the audio system to the audio player. “Device” : Select to connect the...

56 2. Bluetooth ® SETTINGS Camry_Navi_U 1 Select “Bluetooth* Power” . When “Bluetooth* Power” is on :  Vehicles without a smart key systemThe Bluetooth ® device is automatically connected when the engine switch isturned to the “ACC” or “ON” position.  Vehicles with a smart key systemThe Bluetooth ...

59 3. OTHER SETTINGS Camry_Navi_U BAS IC F UNCT IO N 2 1 Display the “General Settings” screen.(  P.57) 2 Select “Clock” . *: With navigation function 3 Select the items to be set.  On this screen, the following functions canbe performed: * 1 : e.g. 1:00 to 1:29  1:00 1:30 to 1:59  2:00 * 2 : Wi...

64 3. OTHER SETTINGS Camry_Navi_U 2. VOICE SETTINGS 1 Press the “APPS” button. 2 Select “Setup” . 3 Select “Voice” . 4 Select the items to be set. Voice volume, etc. can be set. INFORMATION ● “Voice Settings” screen can also be dis-played from the voice recognition topscreen. (  P.134) VOICE SETTIN...

66 3. OTHER SETTINGS Camry_Navi_U 4. MAINTENANCE* 1 Press the “APPS” button. 2 Select “Maintenance” . 3 Select the desired item. When this system is turned on, the“Maintenance Reminder” screen dis-plays when it is time to replace a partor certain components. (  P.32) *: With navigation function No....

67 3. OTHER SETTINGS Camry_Navi_U BAS IC F UNCT IO N 2 1 Select the desired part or componentscreen button.  When the vehicle needs to be serviced,the screen button color will change toorange. 2 Set the conditions. 3 Select “OK” after entering the condi- tions. 1 Select “Set Dealer” . 2 Select the ...

70 Camry_Navi_U 1. QUICK REFERENCE ..................... 72 2. SOME BASICS............................... 74 TURNING THE SYSTEM ON AND OFF ...................................... 75 SELECTING AN AUDIO SOURCE ........ 75 DISC SLOT ............................................ 76 USB/AUX PORT .............

3 71 Camry_Navi_U 4 5 6 7 8 9 1 2 3 1. CD .................................................. 97 OVERVIEW ........................................... 97 PLAYING AN AUDIO CD ...................... 99 PLAYING AN MP3/WMA/AAC DISC.................................................... 99 2. USB MEMORY ........

72 Camry_Navi_U 1. BASIC OPERATION 1. QUICK REFERENCE  Without navigation function  With navigation function Press the “AUDIO” button to display the audio screen.

74 1. BASIC OPERATION Camry_Navi_U 2. SOME BASICS This section describes some of the ba-sic features of the audio system. Someinformation may not pertain to yoursystem.  Vehicles without a smart key system Your audio system works when the en-gine switch is turned to the “ACC” or“ON” position.  Veh...

76 1. BASIC OPERATION Camry_Navi_U 1 Display the “Select Audio Source”screen. (  P.75) 2 Select “Reorder” . 3 Select the desired audio source then or to reorder. 4 Select “OK” . 1 Insert a disc into the disc slot.  After insertion, the disc is automaticallyloaded. 1 Press the button and remove the...

77 1. BASIC OPERATION Camry_Navi_U AUDIO SY S T E M 3 1 Press the lid. 2 Open the cover and connect a device.  Turn on the power of the device if it is notturned on. 1 Display the “Audio Settings” screen.(  P.119)  Type A 2 Select “Automatic Sound Levelizer” . 3 Select “High” , “Mid” , “Low” , or...

78 1. BASIC OPERATION Camry_Navi_U 1 Select “Sound” on the audio control screen. 2 Select the desired screen button. TONE AND BALANCE TONE: How good an audio program sounds islargely determined by the mix of thetreble, mid and bass levels. In fact, dif-ferent kinds of music and vocal pro-grams usual...

79 1. BASIC OPERATION Camry_Navi_U AUDIO SY S T E M 3 1 Press this switch to operate the voicecommand system. VOICE COMMAND SYSTEM  The voice command system and its listof commands can be operated.(  P.132) Type A Type B

80 Camry_Navi_U 2. RADIO OPERATION 1. AM/FM RADIO ■ CONTROL SCREEN  Without navigation function OVERVIEW Select “AM” or “FM” on the “Select Audio Source” screen. (  P.75)  Top screen  Option screen

81 2. RADIO OPERATION Camry_Navi_U AUDIO SY S T E M 3  With navigation function ■ CONTROL PANEL  Top screen  Option screen

83 2. RADIO OPERATION Camry_Navi_U AUDIO SY S T E M 3 1 Tune in the desired station. 2 Select “(add new)” .  To change the preset station to a differentone, select and hold the preset station. 3 Select “Yes” on the confirmation screen. 4 Select “OK” after setting the new pre- set station. 1 Select ...

84 2. RADIO OPERATION Camry_Navi_U ■ REFRESHING THE STATION LIST 1 Select “Refresh” on the station list screen and the following screen will bedisplayed. “Cancel Refresh” : Select to cancel the refresh. “Source” : Select to change to another au- dio source while refreshing. 1 Display the cache radio...

85 2. RADIO OPERATION Camry_Navi_U AUDIO SY S T E M 3 1 Select “Station List” . 2 FM radio only: Select a desired genreof station and select a desired station.  The genre list is in the following order:• Classical• Country• EasyLis (Easy Listening)• Inform (Information)• Jazz• News• Oldies• Other• ...

87 2. RADIO OPERATION Camry_Navi_U AUDIO SY S T E M 3 1 Select the “HD)” logo. 2 Select the desired channel.  Turning the “TUNE/SCROLL” knob can also select the desired multicast channel. 1 Select “Tag” to bookmark the music information. 2 Connect an iPod. (  P.77)  Turn on the power of the iPod ...

89 2. RADIO OPERATION Camry_Navi_U AUDIO SY S T E M 3 TROUBLESHOOTING GUIDE Experience Cause Action Mismatch of time alignmenta user may hear a short pe-riod of programming re-played or an echo, stutteror skip. The radio stations analogand digital volume is notproperly aligned or the sta-tion is in ...

90 2. RADIO OPERATION Camry_Navi_U 2. XM Satellite Radio* ■ CONTROL SCREEN ■ CONTROL PANEL OVERVIEW Select “XM” on the “Select Audio Source” screen. (  P.75) *: If equipped

92 2. RADIO OPERATION Camry_Navi_U HOW TO SUBSCRIBE TO AN XM Satellite Radio To listen to a satellite radio broadcastin the vehicle, a subscription to the XMSatellite Radio service is necessary. An XM Satellite Radio is a tuner de-signed exclusively to receive broad-casts provided under a separatesu...

94 2. RADIO OPERATION Camry_Navi_U  If “Ch 000” is selected using the “TUNE/ SCROLL” knob, the ID code, which is 8 alphanumeric characters, will be dis-played. If another channel is selected, theID code will no longer be displayed. Thechannel (000) alternates between display-ing the radio ID and th...

95 2. RADIO OPERATION Camry_Navi_U AUDIO SY S T E M 3 IF THE SATELLITE RADIO TUNER MALFUNCTIONS When problems occur with the XM tuner, a message will appear on the screen. Re-ferring to the table below to identify the problem, take the suggested corrective ac-tion. Message Explanation “Check Antenna...

96 2. RADIO OPERATION Camry_Navi_U 3. INTERNET RADIO* 1 Select the internet radio application.  The internet radio application screen isdisplayed.  Perform operations according to the dis-played application screen.  For the instrument panel operationmethod:  P.75  If a compatible phone is alrea...

97 Camry_Navi_U AUDIO SY S T E M 3 3. MEDIA OPERATION 1. CD ■ CONTROL SCREEN ■ CONTROL PANEL OVERVIEW The CD operation screen can be reached by the following methods:  Insert a disc. (  P.76)  Select “CD” on the “Select Audio Source” screen. (  P.75)

99 3. MEDIA OPERATION Camry_Navi_U AUDIO SY S T E M 3 1 Select the repeat button to change on/off. 1 Select the random button to changeon/off. 1 Select the repeat button to change on/off. 1 Select the random button to changeon/off. PLAYING AN AUDIO CD REPEATING The track currently being listened toc...

103 3. MEDIA OPERATION Camry_Navi_U AUDIO SY S T E M 3 1 Select the repeat button to change on/off. 1 Select the random button to changeon/off. PLAYING A USB AUDIO REPEATING The file/track currently being listenedto can be repeated. RANDOM ORDER Files/tracks can be automatically andrandomly selected...

104 3. MEDIA OPERATION Camry_Navi_U 3. iPod ■ CONTROL SCREEN OVERVIEW The iPod operation screen can be reached by the following methods:  Connect an iPod. (  P.77)  Select “iPod (DEVICE NAME)” on the “Select Audio Source” screen. (  P.75)

107 3. MEDIA OPERATION Camry_Navi_U AUDIO SY S T E M 3 1 Select the repeat button to change on/off. 1 Select the shuffle button to change on/off. iPod AUDIO REPEATING The track currently being listened tocan be repeated. RANDOM ORDER Tracks can be automatically and ran-domly selected. iPod VIDEO To ...

108 3. MEDIA OPERATION Camry_Navi_U 4. Bluetooth ® AUDIO ■ CONTROL SCREEN The Bluetooth ® audio system enables users to enjoy listening to music that is played on a portable player on the vehicle speakers via wireless communication. This audio system supports Bluetooth ® , a wireless data system cap...

113 3. MEDIA OPERATION Camry_Navi_U AUDIO SY S T E M 3  Registering an additional device 1 Select “Select Device” on the Bluetooth ® audio control screen. 2 For more information:  P.50  Selecting a registered device 1 Select “Select Device” on the Bluetooth ® audio control screen. 2 For more info...

114 3. MEDIA OPERATION Camry_Navi_U 5. AUX ■ CONTROL SCREEN ■ CONTROL PANEL OVERVIEW Select “AUX” on the “Select Audio Source” screen. (  P.75)

116 Camry_Navi_U 4. AUDIO REMOTE CONTROLS 1. STEERING SWITCHES  “MODE/HOLD” switch Some parts of the audio system can be adjusted using the switches on the steeringwheel. No. Switch Volume control switch Back switch “ ” switch Enter switch “MODE/HOLD” switch Mode Operation Function AM, FM, XM, AUX ...

117 4. AUDIO REMOTE CONTROLS Camry_Navi_U AUDIO SY S T E M 3  “ ” switch  “ ” switch  Enter switch Mode Operation Function AM/FM Radio Press Preset station/channel up/downStation/channel list up/down Press and hold Fast preset station/channel up/downFast station/channel list up/down XM Press Pres...

119 Camry_Navi_U AUDIO SY S T E M 3 5. SETUP 1. AUDIO SETTINGS 1 Press the “APPS” button. 2 Select “Setup” . 3 Select “Audio” . 4 Select the items to be set. Detailed audio settings can be pro-grammed. AUDIO SETTINGS SCREEN No. Function Page Select to change the num-ber of preset radio sta-tions/cha...

120 5. SETUP Camry_Navi_U 1 Display the “Audio Settings” screen.(  P.119) 2 Select “Number of Radio Presets” . 3 Select the button with the desired num-ber to be displayed. SETTING THE NUMBER OF RADIO PRESETS

121 Camry_Navi_U AUDIO SY S T E M 3 6. TIPS FOR OPERATING THE AUDIO SYSTEM 1. OPERATING INFORMATION Fading and drifting stations: Generally, theeffective range of FM is about 25 miles (40km). Once outside this range, you may no-tice fading and drifting, which increase withthe distance from the radio...

122 6. TIPS FOR OPERATING THE AUDIO SYSTEM Camry_Navi_U  Cargo loaded on the roof luggage carrier,especially metal objects, may adverselyaffect the reception of XM Satellite Radio.  Alternation or modifications carried outwithout appropriate authorization mayinvalidate the user’s right to operate ...

123 6. TIPS FOR OPERATING THE AUDIO SYSTEM Camry_Navi_U AUDIO SY S T E M 3  Special shaped discs  Transparent/translucent discs  Low quality discs  Labeled discs  Handle discs carefully, especially wheninserting them. Hold them on the edgeand do not bend them. Avoid getting fin-gerprints on the...

124 6. TIPS FOR OPERATING THE AUDIO SYSTEM Camry_Navi_U To clean a disc : Wipe it with a soft, lint- free cloth that has been dampened withwater. Wipe in a straight line from the cen-ter to the edge of the disc (not in circles).Dry it with another soft, lint-free cloth. Donot use a conventional reco...

125 6. TIPS FOR OPERATING THE AUDIO SYSTEM Camry_Navi_U AUDIO SY S T E M 3 The following iPod ® , iPod nano ® , iPod classic ® , iPod touch ® and iPhone ® devic- es can be used with this system. Made for • iPod touch (5th generation)• iPod touch (4th generation)• iPod touch (3rd generation)• iPod to...

126 6. TIPS FOR OPERATING THE AUDIO SYSTEM Camry_Navi_U ■ CORRESPONDING SAMPLINGFREQUENCY ■ CORRESPONDING CHANNEL ■ CORRESPONDING BIT RATES (Variable Bit Rate (VBR) compatible)  MP3 (MPEG Audio Layer 3), WMA(Windows Media Audio) and AAC(Advanced Audio Coding) are audio com-pression standards.  Thi...

128 6. TIPS FOR OPERATING THE AUDIO SYSTEM Camry_Navi_U  This is a general term that describes theprocess of writing data on-demand to CD-R, etc., in the same way that data is writ-ten to floppy or hard discs.  This is a method of embedding track-related information in an MP3 file. Thisembedded in...

129 6. TIPS FOR OPERATING THE AUDIO SYSTEM Camry_Navi_U AUDIO SY S T E M 3 ERROR MESSAGES Mode Message Explanation CD “No music files found.” This indicates that no MP3/WMA/AAC files areincluded in the disc. “Check disc” It indicates that the disc is dirty, damaged, or itwas inserted upside down. Cl...

132 Camry_Navi_U 1. VOICE COMMAND SYSTEM OPERATION 1. VOICE COMMAND SYSTEM Talk switch  Press the talk switch to start the voicecommand system.  To cancel voice recognition, press andhold the talk switch. Back switch  Press the back switch to return to the pre-vious screen.  It is unnecessary to...

133 1. VOICE COMMAND SYSTEM OPERATION Camry_Navi_U V O ICE COMM AND S Y S T E M 4 1 Press the talk switch. 2 Say the tab selection command or se-lect the desired tab.  Commands related with each function aredisplayed on the screen of the each func-tion tab. Some commonly used com-mands are displaye...

134 1. VOICE COMMAND SYSTEM OPERATION Camry_Navi_U 3 Say the command displayed on thescreen.  Registered POIs, registered names in thecontacts list etc., can be said in the placeof the “<>” next to the commands.(  P.139) For example: Say “Find nearby dining” , “Call John smith” etc.  If a d...

135 1. VOICE COMMAND SYSTEM OPERATION Camry_Navi_U V O ICE COMM AND S Y S T E M 4 1 Press the talk switch. 2 Say “Enter an address” . 3 Say “<house number, street name, city name, State>” continuously.  A confirmation screen will be displayedshowing the recognition results. If multiplematchin...

138 1. VOICE COMMAND SYSTEM OPERATION Camry_Navi_U 2. CASUAL SPEECH RECOGNIZATION Due to natural language speech recog-nition technology, this system enablesrecognition of a command when spo-ken naturally. However, the systemcannot recognize every variation ofeach command. In some situations, itis p...

139 1. VOICE COMMAND SYSTEM OPERATION Camry_Navi_U V O ICE COMM AND S Y S T E M 4 3. COMMAND LIST  Frequently used commands are listed in the following tables.  For devices that are not installed in the vehicle, the related commands will not be dis-played in the screen. Also, according to conditio...

5 141 Camry_Navi_U 6 7 8 9 1 2 3 4 5 1. RECEIVING WEATHER INFORMATION ......................... 142 DISPLAYING WEATHER INFORMATION ................................. 142 2. RECEIVING TRAFFIC MAP INFORMATION ......................... 144 DISPLAYING TRAFFIC MAP INFORMATION ................................

142 Camry_Navi_U 1. USEFUL INFORMATION 1. RECEIVING WEATHER INFORMATION 1 Press the “APPS” button. 2 Select “Weather” . 3 Check that the “Weather” screen is dis-played.  Without navigation function Weather information can be receivedvia HD Radio broadcast.  With navigation function Weather informa...

143 1. USEFUL INFORMATION Camry_Navi_U IN FORM A T ION 5 1 Display the “Weather” screen.(  P.142) 2 Select “Current Weather” . 3 Select the desired tab to be displayed. DISPLAYING THE WEATHER OF THE CURRENT LOCATION INFORMATION ● If weather is set to the home screen, theweather screen of the curren...

144 1. USEFUL INFORMATION Camry_Navi_U 2. RECEIVING TRAFFIC MAP INFORMATION* 1 Press the “APPS” button. 2 Select “Traffic” . 3 Check that the “Traffic Map” screen isdisplayed. Traffic map information can be re-ceived via HD Radio broadcast. DISPLAYING TRAFFIC MAP INFORMATION *: Without navigation fu...

145 1. USEFUL INFORMATION Camry_Navi_U IN FORM A T ION 5 3. DATA SERVICES SETTINGS* 1 Press the “APPS” button. 2 Select “Setup” . 3 Select “HD Data” . 4 Select the desired item to be set.  Select a checkbox on the right to set. SETTING DOWNLOAD METHODS Data service information, which iscomprised of...

6 147 Camry_Navi_U 4 5 7 8 9 1 2 3 6 1. REAR VIEW MONITOR SYSTEM .................................... 148 DRIVING PRECAUTIONS ................... 148 SCREEN DESCRIPTION .................... 149 2. REAR VIEW MONITOR SYSTEM PRECAUTIONS ......... 150 AREA DISPLAYED ON SCREEN ........ 150 THE CAMERA ......

148 Camry_Navi_U 1. REAR VIEW MONITOR SYSTEM 1. REAR VIEW MONITOR SYSTEM The rear view monitor system assiststhe driver by displaying an image of theview behind the vehicle while backingup, for example while parking. INFORMATION ● The screen illustrations used in this textare intended as examples, a...

149 1. REAR VIEW MONITOR SYSTEM P E RIP H E RAL MO N IT O RING S Y S T E M Camry_Navi_U 6 SCREEN DESCRIPTION  Vehicles without smart key systemThe rear view monitor system screen will be displayed if the shift lever is shifted to the“R” position while the engine switch is in the “ON” position.  Ve...

150 1. REAR VIEW MONITOR SYSTEM Camry_Navi_U 2. REAR VIEW MONITOR SYSTEM PRECAUTIONS  The image adjustment procedure for therear view monitor system screen is thesame as the procedure for adjusting thenavigation screen. (  P.40) AREA DISPLAYED ON SCREEN The rear view monitor system displaysan imag...

154 1. REAR VIEW MONITOR SYSTEM Camry_Navi_U  Vehicle width guide lines VEHICLE WIDTH GUIDE LINES Visually check the surroundings andthe area behind the vehicle. In the caseshown below, the truck appears to beoutside of the vehicle width guide linesand the vehicle does not look as if ithits the tru...

155 1. REAR VIEW MONITOR SYSTEM Camry_Navi_U P E RIP H E RAL MO N IT O RING S Y S T E M 6 3. THINGS YOU SHOULD KNOW If you notice any of the following symptoms, refer to the likely cause and the so-lution, and re-check. If the symptom is not resolved by the solution, have the vehicle inspected byyou...

7 157 Camry_Navi_U 4 5 6 8 9 1 2 3 7 1. QUICK REFERENCE ................... 158 2. SOME BASICS ............................ 159 REGISTERING/CONNECTING A Bluetooth ® PHONE ........................... 159 USING THE PHONE SWITCH/ MICROPHONE ................................. 160 VOICE COMMAND SYSTEM.......

158 Camry_Navi_U 1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 1. QUICK REFERENCE The phone top screen can be used to make a phone call. To display the hands-freeoperation screen, press the “APPS” button and select “Phone” , the switch on the steering wheel or switch on the instrument p...

159 1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) Camry_Navi_U PH O N E 7 2. SOME BASICS The hands-free system enables callsto be made and received without hav-ing to take your hands off the steeringwheel. This system supports Bluetooth ® . Bluetooth ® is a wireless data system that ena...

162 1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) Camry_Navi_U 3. CALLING ON THE Bluetooth ® PHONE 1 Press the “APPS” button. 2 Select “Phone” . 3 Select the desired tab to call from.  The phone top screen can be displayed by pressing the switch on the steering wheel or switch on the i...

163 1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) Camry_Navi_U PH O N E 7 1 Display the phone top screen.(  P.162) 2 Select the “Favorites” tab and select the desired contact. 3 Select the desired number. 4 Check that the “Call” screen is dis-played. 1 Display the phone top screen.(  ...

164 1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) Camry_Navi_U 1 Display the phone top screen.(  P.162) 2 Select the “Contacts” tab and select the desired contact. 3 Select the desired number. 4 Check that the “Call” screen is dis-played. INFORMATION ● When making a call to the same nu...

166 1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) Camry_Navi_U 1 Display the phone top screen.(  P.162) 2 Select the “Dial Pad” tab and enter the phone number. 3 Select or press the switch on the steering wheel. 4 Check that the “Call” screen is dis-played. 1 Press the switch on the st...

167 1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) Camry_Navi_U PH O N E 7 4. RECEIVING ON THE Bluetooth ® PHONE 1 Select or press the switch on the steering wheel to talk on the phone. To refuse to receive the call : Select or press the switch on the steer- ing wheel. To adjust the volu...

168 1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) Camry_Navi_U 5. TALKING ON THE Bluetooth ® PHONE ■ BY DIAL PAD 1 Select “0-9” . 2 Enter the desired number. While talking on the phone, this screenis displayed. The operations outlinedbelow can be performed on thisscreen. No. Function Pa...

170 1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) Camry_Navi_U 1 Select or press the switch on the steering wheel to start talking withthe other party. To refuse to receive the call : Select or press the switch on the steer- ing wheel.  Each time is selected or the switch on the steeri...

171 1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) Camry_Navi_U PH O N E 7 6. Bluetooth ® PHONE MESSAGE FUNCTION 1 Press the “APPS” button. 2 Select “Phone” .  You can also display the message inboxscreen to select “Messages” . (  STEP4) 3 Select .  The phone top screen can be display...

172 1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) Camry_Navi_U 1 Display the message inbox screen.(  P.171) 2 Select the desired message from thelist. 3 Check that the message is displayed. RECEIVING A MESSAGE When an e-mail/SMS/MMS is re-ceived, the incoming message screenpops up with...

173 1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) Camry_Navi_U PH O N E 7 1 Display the message inbox screen.(  P.171) 2 Select the desired message from thelist. 3 Select “Quick Message” . 4 Select the desired message. 5 Select “Send” .  While the message is being sent, a send-ing mes...

176 Camry_Navi_U 2. SETUP 1. PHONE/MESSAGE SETTINGS 1 Press the “APPS” button. 2 Select “Setup” . 3 Select “Phone” . 4 Select the item to be set. 1 Display the phone top screen.(  P.162) 2 Select “Settings” . PHONE/MESSAGE SETTINGS SCREEN No. Information Page Registering/connecting aphone 49 Sound ...

177 2. SETUP Camry_Navi_U PH O N E 7 1 Display the “Phone/Message Settings”screen. (  P.176) 2 Select “Sound Settings” . 3 Select the desired item to be set. “Sound Settings” SCREEN The call and ringtone volume can beadjusted. A ringtone can be selected. No. Function Select to set the desired ringt...

178 2. SETUP Camry_Navi_U 1 Display the “Phone/Message Settings”screen. (  P.176) 2 Select “Contact/Call History Set- tings” . 3 Select the desired item to be set. *: For PBAP compatible Bluetooth ® phones, this function is available when“Automatic Transfer” is set to off.(  P.178) “Contact/Call H...

179 2. SETUP Camry_Navi_U PH O N E 7 ■ FOR PBAP COMPATIBLE Bluetooth ® PHONES 1 Select “Update Contacts from Phone” .  Contacts are transferred automatically. 2 Check that a confirmation screen isdisplayed when the operation is com-plete.  This operation may be unnecessarydepending on the type of ...

181 2. SETUP Camry_Navi_U PH O N E 7 ■ REGISTERING A NEW CONTACT INA DIFFERENT WAY (FROM THE“Call History” SCREEN) 1 Display the phone top screen.(  P.162) 2 Select the “Call History” tab and se- lect a contact not yet registered in thecontact list. 3 Select “Add to Contacts” . 4 Follow the steps i...

186 2. SETUP Camry_Navi_U 1 Display the “Phone/Message Settings”screen. (  P.176) 2 Select “Messaging Settings” . 3 Select the desired item to be set. “Messaging Settings” SCREEN No. Function Select to set automatic messagetransfer on/off. Select to set automatic messagereadout on/off. Select to se...

187 2. SETUP Camry_Navi_U PH O N E 7 1 Display the phone top screen.(  P.162) 2 Press the switch. 3 Select . 1 Display the “Phone/Message Settings”screen. (  P.176) 2 Select “Phone Display Settings” . 3 Select the desired item to be set. INFORMATION ● Depending on the phone, these func-tions may n...

189 3. WHAT TO DO IF... Camry_Navi_U PH O N E 7  When registering/connecting a cellular phone Symptom Likely cause Solution Page Cellular phone This system A cellular phone can-not be registered. An incorrect pass-code was enteredon the cellularphone. Enter the correct pass-code on the cellularphon...

190 3. WHAT TO DO IF... Camry_Navi_U  When making/receiving a call “Unable to dial.Please check yourphone.” Bluetooth ® function is not enabled onthe cellular phone. Enable the Bluetooth ® function on the cellularphone.   Old registration in-formation remainson either this sys-tem or the cellular...

191 3. WHAT TO DO IF... Camry_Navi_U PH O N E 7  When using the phonebook Symptom Likely cause Solution Page Cellular phone This system Phonebook data can-not be transferredmanually/automati-cally. The profile versionof the connectedcellular phone maynot be compatiblewith transferringphonebook data...

193 3. WHAT TO DO IF... Camry_Navi_U PH O N E 7  In other situations Symptom Likely cause Solution Page Cellular phone This system The Bluetooth ® con- nection status is dis-played at the top ofthe screen each timethe engine switch is infollowing.  Vehicles withouta smart key sys-tem The engine sw...

198 Camry_Navi_U 1. BASIC OPERATION 1. QUICK REFERENCE MAP SCREEN To display this screen, press the “APPS” button, then select “Navigation” on the “Apps” screen. No. Name Function Page 2D North-up, 2Dheading-up or 3Dheading-up sym-bol Indicates whether the map orientation is set tonorth-up or headin...

200 1. BASIC OPERATION Camry_Navi_U NAVIGATION OPTIONS SCREEN The navigation options allow you to change map configurations, display/hide POIicons, and edit the navigation routes. To display the “Navigation Options” screen,press the “APPS” button, select “Navigation” on the “Apps” screen, and select...

201 1. BASIC OPERATION Camry_Navi_U NAV IG ATIO N S Y S T E M 8 2. MAP SCREEN OPERATION 1 Press the “APPS” button. 2 Select “Navigation” . 3 Check that the current position map isdisplayed. 1 Select or to change the scale of the map screen.  The scale indicator bar appears at the bot-tom of the scr...

202 1. BASIC OPERATION Camry_Navi_U 1 Select on the map screen. 2 Check that the footprint map is dis-played.  To return to the normal map display, select . 1 Select , or .  North-up screen  Heading-up screen FOOTPRINT MAP For areas covered by the footprint map(some major cities), a footprint map...

203 1. BASIC OPERATION Camry_Navi_U NAV IG ATIO N S Y S T E M 8  3D screen : North-up symbol Regardless of the direction of vehicle trav-el, north is always up. : Heading-up symbol The direction of vehicle travel is always up. : 3D Heading-up symbol The direction of vehicle travel is always up.  T...

204 1. BASIC OPERATION Camry_Navi_U ■ MAP ONLY ■ DUAL MAP  The map on the left is the main map.  Editing right map 1 Select any point on the right side map. 2 Select the desired item.  When set to on, the indicator will illumi-nate. The right side map can be edited. No. Function Page Select to ch...

205 1. BASIC OPERATION Camry_Navi_U NAV IG ATIO N S Y S T E M 8 ■ COMPASS  To scroll over the map screen, place thecursor mark in the desired position andthen touch and hold the map screen. Themap will continue scrolling in that directionuntil the finger is released. Information about the destinati...

206 1. BASIC OPERATION Camry_Navi_U 1 Select one of the 8 directional arrowsto move the cursor to the desired pointand then select “OK” . ADJUSTING LOCATION IN SMALL INCREMENTS The cursor location can be adjusted insmall increments when “Adjust Loca- tion” is selected on the setting map screen. Also...

207 1. BASIC OPERATION Camry_Navi_U NAV IG ATIO N S Y S T E M 8 3. MAP SCREEN INFORMATION 1 Select “Options” on the map screen. 2 Select “Map Information” . 3 Select the desired items to be dis-played.  When set to on, the indicator will illumi-nate. 1 Display the “Map Information” screen.(  P.207...

209 1. BASIC OPERATION Camry_Navi_U NAV IG ATIO N S Y S T E M 8 1 Display the “Map Information” screen.(  P.207) 2 Select “Route Trace” .  The “Route Trace” indicator illuminates and the route trace starts. 3 Check that the traveled line is dis-played. ■ STOP RECORDING THE ROUTETRACE 1 Select “Rou...

210 1. BASIC OPERATION Camry_Navi_U  Destination information No. Function Select to register as a memory point.To change the icon, name, etc.:  P.245 Select to set as a destination. Select to call the registered number. Select to delete destination or mem-ory point. Select to display the edit memo...

211 1. BASIC OPERATION Camry_Navi_U NAV IG ATIO N S Y S T E M 8 4. TRAFFIC INFORMATION 1 Press the “APPS” button. 2 Select “Traffic” . 3 Select the desired item. 1 Display the “Traffic Information”screen. (  P.211) 2 Select “Traffic Event List” . 3 Select the desired traffic information. “On Curren...

212 1. BASIC OPERATION Camry_Navi_U 1 Display the “Traffic Information”screen. (  P.211) 2 Select “Predictive Traffic Map” . 3 Scroll the map to the desired point andset the time of predictive traffic infor-mation.  The time of the predictive traffic informa-tion can be displayed in 15-minute step...

213 1. BASIC OPERATION Camry_Navi_U NAV IG ATIO N S Y S T E M 8 1 Select “Options” on the map screen. 2 Select “Map Information” . 3 Select “Traffic Information” .  When set to on, the indicator will illumi-nate. 4 Check that the traffic information is dis-played. DISPLAYING TRAFFIC INFORMATION ON ...

214 Camry_Navi_U 2. DESTINATION SEARCH 1. DESTINATION SEARCH SCREEN The “Destination” screen enables to search for a destination. To display the “Des-tination” screen, press the “APPS” button, and select “Navigation” on the “Apps” screen. Then select “Dest.” on the map screen. No. Function Page Sele...

217 2. DESTINATION SEARCH Camry_Navi_U NAV IG ATIO N S Y S T E M 8 1 Display the “Destination” screen.(  P.216) 2 Select “Address” , “Point of Interest” or “Intersection & Freeway” . 3 Select “Select State/Province” or “Change State/Province” .  If a state (province) has not been selectedyet, ...

218 2. DESTINATION SEARCH Camry_Navi_U 1 Display the “Destination” screen.(  P.216) 2 Select “Address” . 3 Select the desired search method. 1 Select “City” . 2 Enter a city name and select “OK” . “Last 5 Cities” : Select the city name from the list of the last 5 cities. 3 Select the desired city n...

219 2. DESTINATION SEARCH Camry_Navi_U NAV IG ATIO N S Y S T E M 8 1 Display the “Destination” screen.(  P.216) 2 Select “Point of Interest” . 3 Select the desired search method. 1 Select “Name” . 2 Enter a POI name and select “OK” . 3 Select the desired POI.  When entering the name of a specific ...

221 2. DESTINATION SEARCH Camry_Navi_U NAV IG ATIO N S Y S T E M 8  When “Near a City Center in XX*” is se-lected 1 Select “Near a City Center in XX” . 2 Enter a city name and select “OK” . “Last 5 Cities” : Select the city name from the list of the last 5 cities. 3 Select the desired city name. 4 ...

222 2. DESTINATION SEARCH Camry_Navi_U 1 Display the “Destination” screen.(  P.216) 2 Select “Previous Destinations” . 3 Select the desired destination. “Previous Start Point” : Select to display the start point map of the previous guidedroute. “Delete” : Select to delete the previous destination. ...

223 2. DESTINATION SEARCH Camry_Navi_U NAV IG ATIO N S Y S T E M 8 1 Display the “Destination” screen.(  P.216) 2 Select “Emergency” . 3 Select the desired emergency catego-ry. 4 Select the desired destination. 1 Display the “Destination” screen.(  P.216) 2 Select “Intersection & Freeway” . 3 ...

225 2. DESTINATION SEARCH Camry_Navi_U NAV IG ATIO N S Y S T E M 8 1 Display the “Destination” screen.(  P.216) 2 Select “Map” . 3 Scroll the map to the desired point and select “Go to ” . “Adjust Location” : Select to adjust the position in smaller increments. (  P.206)  If a destination has alr...

226 2. DESTINATION SEARCH Camry_Navi_U 3. STARTING ROUTE GUIDANCE 1 Select “OK” to start guidance. When the destination is set, the entireroute map from the current position tothe destination is displayed. STARTING ROUTE GUIDANCE No. Information/Function Select the desired route from 3 pos-sible rou...

227 2. DESTINATION SEARCH Camry_Navi_U NAV IG ATIO N S Y S T E M 8 1 Select “3 Routes” . 2 Select the desired route. ■ DISPLAYING 3 ROUTES INFORMA-TION 1 Select “Info” . 2 Check that the “3 Route Information”screen is displayed. 3 ROUTES SELECTION No. Function Select to display the quickest route. S...

228 2. DESTINATION SEARCH Camry_Navi_U 1 Select “Turn List” . 2 Check that the turn list is displayed. 1 Select “Edit Route” . 2 Select the desired item. DISPLAYING TURN LIST A list of turn information from the cur-rent position to the destination can bedisplayed. No. Information Current position Di...

229 2. DESTINATION SEARCH Camry_Navi_U NAV IG ATIO N S Y S T E M 8 1 Select “Options” on the map screen. 2 Select “Pause Guidance” . 1 Select “Resume Guidance” . PAUSING GUIDANCE RESUMING GUIDANCE

230 Camry_Navi_U 3. ROUTE GUIDANCE 1. ROUTE GUIDANCE SCREEN 1 Select the route information bar ( ) or the route information button ( ) to change the display of the route infor-mation bar. During the route guidance, varioustypes of guidance screens can be dis-played depending on conditions. SCREEN FO...

231 3. ROUTE GUIDANCE Camry_Navi_U NAV IG ATIO N S Y S T E M 8 1 Select the route information bar. 2 Check that the list of the distance andtime is displayed.  By selecting one of the number buttons,the desired route information is displayed. 1 Select “Options” on the map screen. 2 Select “Route Ov...

232 3. ROUTE GUIDANCE Camry_Navi_U DURING FREEWAY DRIVING During freeway driving, the freewayexit information screen will be dis-played. No./ Icon Information/Function Distance and time from the currentposition to the road traffic facilities. Name of the road traffic facilities. POIs that are close ...

233 3. ROUTE GUIDANCE Camry_Navi_U NAV IG ATIO N S Y S T E M 8 TOLLGATE GUIDANCE When the vehicle approaches a toll-gate, the tollgate view will be dis-played. No. Information/Function Distance from the current position tothe tollgate Select to hide the tollgate guidancescreen. To return to the toll...

234 3. ROUTE GUIDANCE Camry_Navi_U 1 Select “Turn List” on the “Map Mode” screen. (  P.203) 2 Check that the turn list screen is dis-played. 1 Select “Turn-by-Turn Arrow” on the “Map Mode” screen. (  P.203) 2 Check that the turn-by-turn arrowscreen is displayed. TURN LIST SCREEN No. Information/Fu...

235 Camry_Navi_U 3. ROUTE GUIDANCE NAV IG ATIO N S Y S T E M 8 2. TYPICAL VOICE GUIDANCE PROMPTS As the vehicle approaches an intersec-tion, or point, where maneuvering thevehicle is necessary, the system’svoice guidance will provide variousmessages. WARNING ● Be sure to obey the traffic regulations...

237 3. ROUTE GUIDANCE Camry_Navi_U NAV IG ATIO N S Y S T E M 8 1 Display the “Edit Route” screen.(  P.236) 2 Select “Add” . 3 Search for an additional destination inthe same way as a destination search.(  P.214) 4 Select “Add Destination Here” to in- sert the new destination into the route. 1 Disp...

238 3. ROUTE GUIDANCE Camry_Navi_U 1 Display the “Edit Route” screen.(  P.236) 2 Select “Preferences” . 3 Select the desired route preferencesand select “OK” .  When set to on, the indicator will illumi-nate. 1 Display the “Edit Route” screen.(  P.236) 2 Select “Route Type” . 3 Select the desired...

239 3. ROUTE GUIDANCE Camry_Navi_U NAV IG ATIO N S Y S T E M 8 1 Display the “Edit Route” screen.(  P.236) 2 Select “Detour” . 3 Select the desired detour distance. DETOUR SETTING During the route guidance, the routecan be changed to detour around asection of the route where a delay iscaused by roa...

240 3. ROUTE GUIDANCE Camry_Navi_U 1 Display the “Edit Route” screen. (  P.236) 2 Select “Start from Adjacent Road” . INFORMATION ● This picture shows an example of howthe system would guide around a delaycaused by a traffic jam. This position indicates the location of atraffic jam caused by road r...

241 Camry_Navi_U NAV IG ATIO N S Y S T E M 8 4. MEMORY POINTS 1. MEMORY POINTS SETTINGS 1 Press the “APPS” button. 2 Select “Setup” . 3 Select “Navigation” . 4 Select the desired item to be set. Home, preset destinations, addressbook entries, areas to avoid can be setas memory points. The registered...

242 4. MEMORY POINTS Camry_Navi_U 1 Display the “Navigation Settings”screen. (  P.241) 2 Select “Home” . 3 Select the desired item to be set. 1 Select “New” . 2 Select the desired item to search forthe location. (  P.214) 3 Select “OK” when the editing home screen appears. 1 Select “Edit” . 2 Sele...

243 4. MEMORY POINTS Camry_Navi_U NAV IG ATIO N S Y S T E M 8 1 Display the “Navigation Settings”screen. (  P.241) 2 Select “Preset Destinations” . 3 Select the desired item. 1 Select “Set” . 2 Select the desired item to search forthe location. (  P.214) 3 Select a position for this preset desti-n...

246 4. MEMORY POINTS Camry_Navi_U ■ CHANGING THE ICON 1 Select “Edit” next to the “Icon”. 2 Select the desired icon.  Change pages by selecting the “Page 1” , “Page 2” or “With Sound” tab. “With Sound” : Select the memory points with a sound  When the “With Sound” tab is selected 1 Select the “Wit...

250 Camry_Navi_U 5. SETUP 1. DETAILED NAVIGATION SETTINGS 1 Press the “APPS” button. 2 Select “Setup” . 3 Select “Navigation” . 4 Select “Detailed Navi. Settings” . 5 Select the items to be set. 6 Select “OK” . Settings are available for pop-up infor-mation, favorite POI categories, lowfuel warning,...

251 5. SETUP Camry_Navi_U NAV IG ATIO N S Y S T E M 8 1 Display the “Detailed Navi. Settings” screen. (  P.250) 2 Select “Favorite POI Categories” . 3 Select the category to be changed. “Default” : Select to set the default catego- ries. 4 Select the desired POI category. “List All Categories” : Se...

253 5. SETUP Camry_Navi_U NAV IG ATIO N S Y S T E M 8 1 Display the “Detailed Navi. Settings” screen. (  P.250) 2 Select “Low Fuel Warning Pop-up” . ■ SEARCHING GAS STATION IN LOWFUEL WARNING 1 Select “Yes” when the low fuel warn- ing appears. 2 Select the desired nearby gas station. 3 Select “Ente...

255 5. SETUP Camry_Navi_U NAV IG ATIO N S Y S T E M 8 1 Display the “Traffic Settings” screen.(  P.254) 2 Select “Avoid Traffic” . 3 Select the desired item. 4 Select “OK” . ■ CHANGING THE ROUTE MANUAL-LY 1 Select the desired item. AUTO AVOID TRAFFIC No. Function Select to automatically changeroute...

262 6. TIPS FOR THE NAVIGATION SYSTEM Camry_Navi_U 2. MAP DATABASE VERSION AND COVERED AREA 1 Press the “APPS” button. 2 Select “Navigation” . 3 Select “Options” . 4 Select “Map Data” . 5 Check that the map data screen is dis-played. MAP INFORMATION Coverage areas and legal informationcan be display...

263 6. TIPS FOR THE NAVIGATION SYSTEM Camry_Navi_U NAV IG ATIO N S Y S T E M 8 ABOUT THE MAP DATA Map data for the navigation system iscontained in a SD card that is insertedin the SD card slot. Do not eject the SD card, as doing somay deactivate the navigation system. NOTICE ● Do not edit or delete...

9 265 Camry_Navi_U 4 5 6 7 8 1 2 3 9 1. Entune App Suite SERVICE ................................... 266 BEFORE USING THE FUNCTION ...... 268 PREPARATION BEFORE USING Entune App Suite .............................. 269 1. Entune App Suite ....................... 271 USING Entune App Suite .............

266 Camry_Navi_U 1. Entune App Suite OVERVIEW 1. Entune App Suite SERVICE* Entune App Suite is a service that enables downloadable applications to be dis-played on and operated from the screen. Before Entune App Suite can be used, afew actions need to be performed first. (  P.269) *: Entune App Sui...

268 1. Entune App Suite OVERVIEW Camry_Navi_U  User registration is required to start usingthe Entune App Suite service.  Entune App Suite does not require an acti-vation fee or monthly recurring fees.  Services requiring a separate contract canalso be used.* *: For details, refer to http://www.t...

269 1. Entune App Suite OVERVIEW Camry_Navi_U Entu ne Ap p Su it e 9 Perform the following actions. In order to use Entune App Suite, the fol-lowing actions must first be performed:  User registration with a service contract(  P.269)  Download the Entune App Suite applica-tion onto your cellular ...

271 Camry_Navi_U Entu ne Ap p Su it e 9 2. Entune App Suite OPERATION 1. Entune App Suite 1 Press the “APPS” button. 2 Select the desired application button. USING Entune App Suite Entune App Suite is a service that en-ables the usable contents of a cellularphone to be displayed on and operatedfrom ...

272 2. Entune App Suite OPERATION Camry_Navi_U ■ DOWNLOADING THE UPDATEDDATA 1 Select “Update” . 2 Check that downloading is started. “Download in Background” : Select to operate other function while downloading. “Cancel” : Select to cancel updating. 3 Check that downloading is completed. UPDATING a...

274 2. Entune App Suite OPERATION Camry_Navi_U IF A MESSAGE APPEARS ON THE SCREEN When problems occur starting up the application player, a message will appear onthe screen. Referring to the table below to identify the problem, take the suggestedcorrective action. Message Display conditions Correcti...

276 2. Entune App Suite OPERATION Camry_Navi_U 1 Display the “Web Search” screen.(  P.275) 2 Select the desired application button tosearch. 3 Enter a search term, and select “GO” . 4 Select “Call” . 5 Select “Yes” . “Cancel” : Select to cancel making a phone call. 6 Check that the “Call” screen is...

278 Camry_Navi_U 3. SETUP 1. Entune App Suite SETTINGS 1 Press the “APPS” button. 2 Select “Setup” . 3 Select “Entune” . 4 Select the items to be set. 5 Select “OK” . Settings are available for Entune AppSuite. SCREEN FOR Entune App Suite SETTINGS No. Function Select to set the voice guidance vol-um...

279 3. SETUP Camry_Navi_U Entu ne Ap p Su it e 9 1 Display the “Entune Settings” screen.(  P.278) 2 Select “Phone Data Plan Pop-Up” . 3 Check the desired function to be oper-ated. 4 Select “OK” . PHONE DATA PLAN POP-UP SETTINGS The phone data plan pop-up can be setwhen a paid application is downloa...

282 ALPHABETICAL INDEX Camry_Navi_U A AAC.......................................................... 97 AM............................................................ 80 APPS button ............................................ 12 “Apps” screen........................................... 14 AUDIO butto...

288 Camry_Navi_U Map database information and updates

294 Camry_Navi_U  Gracenote, the Gracenote logo and logotype, “Powered by Gracenote”, MusicID, PlaylistPlus and MediaVOCS are either registered trademarks or trademarks of Gracenote, Inc.in the United States and/or other countries Certification