Toyota 2012 Matrix- Manuals

20 Event data recorder This vehicle is equipped with an event data recorder (EDR). The main pur-pose of an EDR is to record, in certain crash or near crash-like situations,such as an air bag deployment or hitting a road obstacle, data that will assistin understanding how a vehicle’s systems performe...

21 ● Disclosure of the EDR data Toyota will not disclose the data recorded in an EDR to a third party exceptwhen: • An agreement from the vehicle’s owner (or the lessee for a leased vehicle) is obtained • In response to an official request by the police, a court of law or a govern- ment agency • For...

22 CAUTION ■ General precautions while driving Driving under the influence: Never drive your vehicle when under the influ-ence of alcohol or drugs that have impaired your ability to operate your vehi-cle. Alcohol and certain drugs delay reaction time, impair judgment andreduce coordination, which co...

23 Symbols used throughout this manual Cautions & Notices Symbols used in illustrations CAUTION This is a warning against anything which may cause death or injury to people ifthe warning is ignored. You are informed about what you must or must not doin order to reduce the risk of injury to yours...

TABLE OF CONTENTS 1 1 Before driving Adjusting and operating features such as door locks, mirrors, and steering column. 2 When driving Driving, stopping and safe-driving information. 3 Interior fea-tures Air conditioning and audio systems, as well as other in-terior features for a comfortable drivin...

26 1-1. Key information Keys ■ Key number plate Keep the plate in a safe place such as your wallet, not in the vehicle. In theevent that a key is lost, a new key can be made by your Toyota dealer usingthe key number plate. ( → P. 440) ■ When riding in an aircraft When bringing a wireless remote cont...

27 1-1. Key information 1 Before driving NOTICE ■ To prevent key damage ● Do not subject the keys to strong shocks, expose them to high tempera-tures by placing them in direct sunlight, or get them wet. ● Do not expose the keys to electromagnetic materials or attach any mate-rial that blocks electro...

28 1-2. Opening, closing and locking the doors Wireless remote control ∗ ■ Operation signals A buzzer sounds and the emergency flashers flash to indicate that the doorshave been locked/unlocked. (Locked: Once; Unlocked: Twice) ■ Door lock buzzer If a door is not fully closed, a buzzer sounds continu...

29 1-2. Opening, closing and locking the doors 1 Before driving ■ Key battery depletion If the wireless remote control function does not operate, the battery may bedepleted. Replace the battery when necessary. ( → P. 383) ■ Security feature If a door is not opened within approximately 60 seconds aft...

30 1-2. Opening, closing and locking the doors ■ Certification for wireless remote control For vehicles sold in the U.S.A. NOTE:This device complies with Part 15 of the FCC Rules. Operation is subject tothe following two conditions: (1) This device may not cause harmful interfer-ence, and (2) this d...

31 1 1-2. Opening, closing and locking the doors Before driving Doors The vehicle can be locked and unlocked using the wireless remote control, key or door lock switch. ■ Wireless remote control (if equipped) → P. 28 ■ Key Locks the door Unlocks the door Vehicles with power door locksystem: Turning ...

32 1-2. Opening, closing and locking the doors Rear door child-protector lock The door cannot be opened frominside the vehicle when the locksare set. Unlock Lock These locks can be set to preventchildren from opening the reardoors. Push down on each reardoor switch to lock both reardoors. ■ Inside l...

33 1-2. Opening, closing and locking the doors 1 Before driving Automatic door locking and unlocking systems (vehicles withpower door lock system) The following functions can be set or cancelled: * : Vehicles with an automatic transmission only The shift position linked door locking function works w...

34 1-2. Opening, closing and locking the doors ■ Setting and canceling the functions To switch between set and canceled, follow the procedure below: Close all the doors and switch the engine switch to the “ON”position. (Perform step 2 within 10 seconds.) Shift the shift lever to P or N, andpress and...

35 1-2. Opening, closing and locking the doors 1 Before driving ■ When all the doors are locked with the wireless remote control or key The doors cannot be unlocked with the door lock switch. The door lock switch can be reset by unlocking all the doors with the wire-less remote control or key. ■ The...

36 1-2. Opening, closing and locking the doors Back door ■ Back door handle The back door can be locked and unlocked using the wireless remote control or key. Wireless remote control (if equipped) → P. 28 Key Locks the back door Unlocks the back door Opens the back door Use the back door handle when...

37 1-2. Opening, closing and locking the doors 1 Before driving CAUTION ■ Caution while driving ● Keep the back door closed while driving. If the back door is left open, it may hit nearby objects while driving or lug-gage may be unexpectedly thrown out, causing an accident.In addition, exhaust gases...

39 1-2. Opening, closing and locking the doors 1 Before driving NOTICE ■ Back door damper stays The back door is equipped with damper stays that hold the back door inplace. Observe the following precautions.Failure to do so may cause damage to the back door damper stay, resultingin malfunction. ● Do...

40 1-3. Adjustable components (seats, mirrors, steering wheel) Front seats Folding down the front passenger's seat (vehicles with seatback table) Move the seat rearward. Seat position adjustmentlever Seatback angle adjustmentlever Vertical height adjustmentlever (driver’s side only) STEP 1

41 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving Lower the head restraint and fixthe seatback at the most uprightlock position. Pull up either seatback lockrelease knob beside the seat-back and fold the seatbackdown. Active head restraints When the occupant’s backpress...

42 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Active head restraints Even small forces applied to the seatback may cause the head restraint tomove. Pushing up a locked head restraint forcibly may appear the headrestraint inner structure. These do not indicate problems. CAUTION ■ S...

43 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving CAUTION ■ After returning the seatback to the upright position (vehicles with seat-back table) Make sure the seatback is securely locked by pressing forward and rear-ward on the top of the seatback. Failure to do so will...

44 1-3. Adjustable components (seats, mirrors, steering wheel) Rear seats The seatbacks of the rear seats can be folded down. Stow the rear outside seat beltbuckles and move the rearcenter seat belt buckle asshown. Lower the head restraints tothe lowest position. Fold the seatback down whilepulling ...

45 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving CAUTION ■ After returning the seatback to the upright position Observe the following precautions. Failure to do so may result in death orserious injury. ● Check that the seat belts are not twisted or caught in the seatba...

46 1-3. Adjustable components (seats, mirrors, steering wheel) Head restraints ■ Removing the head restraints ■ Installing the head restraints Head restraints are provided for all seats. Up Pull the head restraints up. Down Push the head restraint downwhile pushing the lock releasebutton. Lock relea...

47 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving ■ Adjusting the height of the head restraints ■ Adjusting the rear center seat head restraint Always raise the head restraint one level from the stowed position whenusing. CAUTION ■ Head restraint precautions Observe the...

48 1-3. Adjustable components (seats, mirrors, steering wheel) Seat belts Make sure that all occupants are wearing their seat belts before driv- ing the vehicle. ■ Correct use of the seat belts ● Extend the shoulder belt sothat it comes fully over theshoulder, but does notcome into contact with then...

49 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving Seat belt pretensioners (front seats) The pretensioner helps the seatbelt to quickly restrain the occu-pant by retracting the seat beltwhen the vehicle is subjected tocertain types of severe frontalcollision. The pretens...

50 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Pregnant women ■ People suffering illness Obtain medical advice and wear the seat belt in the proper way. ■ Child seat belt usage The seat belts of your vehicle were principally designed for persons of adultsize. ● Use a child restrain...

51 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving CAUTION Observe the following precautions to reduce the risk of injury in the event ofsudden braking, sudden swerving or an accident.Failing to do so may cause death or severe injury. ■ Wearing a seat belt ● Ensure that ...

52 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ Seat belt pretensioners ● Do not place anything, such as a cushion, on the front passenger's seat.Doing so will disperse the passenger's weight, which prevents the sensorfrom detecting the passenger's weight properly. As a resu...

53 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving NOTICE ■ When using a seat belt extender When releasing the seat belt, press on the buckle release button on theextender, not on the seat belt.This helps prevent damage to the vehicle interior and the extender itself.

54 1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel CAUTION ■ Caution while driving Do not adjust the steering wheel while driving.Doing so may cause the driver to mishandle the vehicle and cause an acci-dent, resulting in death or serious injury. ■ After adjusting the stee...

55 1 1-3. Adjustable components (seats, mirrors, steering wheel) Before driving Anti-glare inside rear view mirror Glare from the headlights of vehicles behind can be reduced by using the following functions. Manual anti-glare inside rear view mirror Normal position Anti-glare position Auto anti-gla...

56 1-3. Adjustable components (seats, mirrors, steering wheel) Adjusting the height of the rear view mirror Adjust the height of the rear viewmirror by moving it up and down. ■ To prevent sensor error CAUTION ■ Caution while driving Do not adjust the position of the mirror while driving.Doing so may...

57 1 1-3. Adjustable components (seats, mirrors, steering wheel) Before driving Outside rear view mirrors Folding back the mirrors Push backward to fold the mir-rors. Mirror angle can be adjusted using the switch. Select a mirror to adjust. Left Right Adjust the mirror. Up Right Down Left STEP 1 STE...

58 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Mirror angle can be adjusted when The engine switch is in the “ACC” or “ON” position. ■ When the mirrors are fogged up (vehicles with outside rear view mirrordefoggers) Turn on the mirror defoggers to defog the mirrors. ( → P. 193) CAU...

59 1 Before driving 1-4. Opening and closing the windows Power windows ∗ Lock switch Press the switch down to lockthe passenger window switches. Use this switch to prevent chil-dren from accidentally opening orclosing a passenger window. The power windows can be opened and closed using the following...

60 1-4. Opening and closing the windows CAUTION ■ Closing the windows Observe the following precautions. Failing to do so may result in death or serious injury. ● Check to make sure that all passengers do not have any part of their bodyin a position where it could be caught when a window is being op...

61 1 1-4. Opening and closing the windows Before driving Moon roof ∗ Use the overhead switches to open, close, and tilt the moon roof up and down. ■ Opening and closing Opens the moon roof* The moon roof stops slightlybefore the fully open positionto reduce wind noise. Press the switch again to full...

62 1-4. Opening and closing the windows ■ The moon roof can be operated when The engine switch is in the “ON” position. ■ Operating the moon roof after turning the engine OFF The moon roof can be operated for approximately 45 seconds after theengine switch is turned to the “ACC” or “LOCK” position. ...

63 1-4. Opening and closing the windows 1 Before driving CAUTION ■ Opening the moon roof Observe the following precautions.Failing to do so may cause death or serious injury. ● Do not allow any passengers to put their hands or heads outside the vehi-cle while it is moving. ● Do not sit on top of the...

64 1-5. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap. ■ Before refueling the vehicle Turn the engine switch OFF and ensure that all the doors andwindows are closed. ■ Opening the fuel tank cap Pull up the fuel filler dooropener. Turn the fuel tank cap slo...

65 1-5. Refueling 1 Before driving Closing the fuel tank cap When replacing the fuel tankcap, turn it until a clicking soundis heard. After releasing your hand, the capwill turn slightly to the oppositedirection. ■ Fuel type Unleaded gasoline (Octane rating 87 [Research Octane Number 91] orhigher) ■...

66 1-5. Refueling CAUTION ■ Refueling the vehicle Observe the following precautions while refueling the vehicle. Failure to do so may result in death or serious injury. ● Touch the vehicle or some other metal surface to discharge any staticelectricity.Sparks resulting from discharging static electri...

67 1-5. Refueling 1 Before driving NOTICE ■ Refueling Do not spill fuel during refueling.Doing so may damage the vehicle, such as causing the exhaust systems tooperate abnormally or damaging fuel system components or the vehicle'spainted surface.

68 1-6. Theft deterrent system Engine immobilizer system ■ System maintenance The vehicle has a maintenance-free type engine immobilizer system. ■ Conditions that may cause the system to malfunction ● If the key is in contact with a metallic object ● If the key is in close proximity to or touching a...

69 1-6. Theft deterrent system 1 Before driving ■ Certifications for the engine immobilizer system (for vehicles sold inCanada) Operation is subject to the following two conditions: (1) this device may notcause interference, and (2) this device must accept any interference, includ-ing interference t...

70 1-6. Theft deterrent system Theft prevention labels (except for Canada) These labels are attached tothe vehicle to reduce vehicletheft by facilitating the tracingand recovery of parts from sto-len vehicles. Do not removeunder penalty of law.

71 1 Before driving 1-7. Safety information Correct driving posture Drive in a good posture as follows: Sit upright and well back inthe seat. ( → P. 40) Adjust the position of theseat forward or backward toensure the pedals can bereached and easilydepressed to the extentrequired. ( → P. 40) Adjust t...

72 1-7. Safety information CAUTION ■ While driving ● Do not adjust the position of the driver's seat while driving.Doing so could cause the driver to lose control of the vehicle. ● Do not place a cushion between the driver or passenger and the seatback.A cushion may prevent correct posture from bein...

73 1 1-7. Safety information Before driving SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. Front airbag...

74 1-7. Safety information Airbag system components Front airbag sensors Front passenger occupantclassification system (ECUand sensors) Front passenger airbag Side airbags Seat belt pretensioners andforce limiters Side and curtain shield air-bag sensors Curtain shield airbags “AIR BAG ON” and “AIRBA...

76 1-7. Safety information ■ SRS airbag deployment conditions (SRS front airbags) ● The SRS front airbags will deploy in the event of an impact that exceedsthe set threshold level (the level of force corresponding to an approxi-mately 12 - 18 mph [20 - 30 km/h] frontal collision with a fixed wall th...

77 1-7. Safety information 1 Before driving ■ Conditions under which the SRS airbags may deploy (inflate), otherthan a collision The SRS front airbags may also deploy if a serious impact occurs to theunderside of your vehicle. Some examples are shown in the illustration. ■ Types of collisions that m...

79 1-7. Safety information 1 Before driving ■ When to contact your Toyota dealer In the following cases, contact your Toyota dealer as soon as possible. ● Any of the SRS airbags have been inflated. ● The front of the vehicle is damaged ordeformed, or was involved in an acci-dent that was not severe ...

80 1-7. Safety information CAUTION ■ SRS airbag precautions Observe the following precautions regarding the airbags. Failure to do so may cause death or serious injury. ● The driver and all passengers in the vehicle must wear their seat beltsproperly.The SRS airbags are supplemental devices to be us...

83 1-7. Safety information 1 Before driving CAUTION ■ SRS airbag precautions ● Do not use seat accessories which cover the parts where the SRS sideairbags inflate as they may interfere with inflation of the airbags. ● Do not strike or apply significant levels of force to the area of the SRS air-bag ...

84 1-7. Safety information CAUTION ■ SRS airbag precautions ● If breathing becomes difficult after the SRS airbag has deployed, open adoor or window to allow fresh air in, or leave the vehicle if it is safe to doso. Wash off any residue as soon as possible to prevent skin irritation. ● If the areas ...

85 1 1-7. Safety information Before driving Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classifica- tion system. This system detects the conditions of the front passen- ger seat and activates or deactivates the devices for the front passeng...

87 1-7. Safety information 1 Before driving ■ Unoccupied ■ There is a malfunction in the system *1 : The system judges a person of adult size as an adult. When a smaller adult sits in the front passenger seat, the system may rec-ognize him/her as a child depending on his/her physique and pos-ture. *...

88 1-7. Safety information *4 : Never install a rear-facing child restraint system on the front pas- senger seat. A forward-facing child restraint system should onlybe installed on the front passenger seat when it is unavoidable.( → P. 90) *5 : In case the indicator is not illuminated, consult this ...

89 1-7. Safety information 1 Before driving CAUTION ■ Front passenger occupant classification system precautions ● Do not recline the front passenger seatback so far that it touches a rearseat. This may cause the “AIR BAG OFF” indicator light to be illuminated,which indicates that the passenger’s ai...

90 1-7. Safety information Child restraint systems Points to remember Studies have shown that installing a child restraint system on a rearseat is much safer than installing one to the front passenger seat. ● Choose a child restraint system that suits your vehicle and isappropriate to the age and si...

91 1-7. Safety information 1 Before driving Types of child restraints Child restraint systems are classified into the following 3 typesaccording to the age and size of the child. Rear facing ⎯ Infant seat/convertible seat Forward facing ⎯ Convertible seat Booster seat

92 1-7. Safety information ■ Selecting an appropriate child restraint system ● Use a child restraint system appropriate for the child until the childbecomes large enough to properly wear the vehicle’s seat belt. ● If a child is too large for a child restraint system, sit the child on a rearseat and ...

94 1-7. Safety information Installing child restraints Follow the child restraint system manufacturer's instructions. Firmly secure child restraints to the rear seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt can be u...

95 1-7. Safety information 1 Before driving Installation with LATCH system Type A Widen the gap betweenthe seat cushion andseatback slightly. Latch the hooks of thelower straps onto theLATCH anchors. If the child restraint has atop tether strap, the toptether strap should belatched onto the toptethe...

96 1-7. Safety information Type B Widen the gap betweenthe seat cushion andseatback slightly. Latch the buckles ontothe LATCH anchors. If the child restraint has atop tether strap, the toptether strap should belatched onto the toptether strap anchors. For owners in Canada:A symbol on a child restrai...

99 1-7. Safety information 1 Before driving While pushing the child seat intothe rear seat, allow the shoulderbelt to retract until the child seatis securely in place. After the shoulder belt hasretracted to a point where there isno slack in the belt, pull the belt tocheck that it cannot be extended...

100 1-7. Safety information Removing a child restraint installed with a seat belt Push the release button and fullyretract the seat belt.

101 1-7. Safety information 1 Before driving Child restraint systems with a top tether strap Secure the child restraint usingthe seat belt or the loweranchors, and remove the headrestraint. Open the anchor bracket cover,latch the hook onto the anchorbracket and tighten the top tetherstrap. Make sure...

102 1-7. Safety information CAUTION ■ When installing a booster seat Do not fully extend the shoulder belt to prevent the belt from going to ALRlock mode: ( → P. 49) ALR mode causes the belt to tighten only which could cause injury or dis-comfort to the child. ■ When installing a child restraint sys...

103 1-7. Safety information 1 Before driving CAUTION ■ When installing a child restraint system ● When a booster seat is installed, always ensure that the shoulder belt ispositioned across the center of the child's shoulder. The belt should bekept away from the child's neck, but not so that it could...

106 2-1. Driving procedures Driving the vehicle The following procedures should be observed to ensure safe driv- ing. ■ Starting the engine → P. 118 ■ Driving Automatic transmission With the brake pedal depressed, shift the shift lever to D. ( → P. 122) Release the parking brake. ( → P. 130) Gradual...

107 2-1. Driving procedures 2 Wh en drivin g ■ Parking the vehicle Automatic transmission With the shift lever in D, depress the brake pedal. Set the parking brake. ( → P. 130) Shift the shift lever to P. ( → P. 122) When parking on a hill, if necessary, block the wheels. Turn the engine switch to t...

108 2-1. Driving procedures Starting on a steep uphill Automatic transmission Firmly set the parking brake and shift the shift lever to D. Gently depress the accelerator pedal. Release the parking brake. Manual transmission With the parking brake firmly set and the clutch pedal fullydepressed, shift...

109 2-1. Driving procedures 2 Wh en drivin g ■ Breaking in your new Toyota To extend the life of the vehicle, the following precautions are recommendedto observe: ● For the first 200 miles (300 km):Avoid sudden stops. ● For the first 500 miles (800 km):Do not tow a trailer. ● For the first 1000 mile...

110 2-1. Driving procedures CAUTION ■ When starting the vehicle (vehicles with an automatic transmission) Always keep your foot on the brake pedal while stopped with the engine run-ning. This prevents the vehicle from creeping. ■ When driving the vehicle ● Do not drive if you are unfamiliar with the...

112 2-1. Driving procedures CAUTION ● When stopped on an inclined surface, use the brake pedal and parkingbrake to prevent the vehicle from rolling backward or forward and causingan accident. ● Do not adjust the position of the steering wheel, the seat, or the inside oroutside rear view mirrors whil...

113 2-1. Driving procedures 2 Wh en drivin g CAUTION ■ When shifting the shift lever (vehicles with an automatic transmission) Be careful not to shift the shift lever with the accelerator pedal depressed.This may lead to unexpected rapid acceleration of the vehicle that maycause an accident and resu...

114 2-1. Driving procedures CAUTION ● Always apply the parking brake, shift the shift lever to P (vehicles with anautomatic transmission), stop the engine and lock the vehicle.Do not leave the vehicle unattended while the engine is running. ● Do not touch the exhaust pipe while the engine is running...

115 2-1. Driving procedures 2 Wh en drivin g CAUTION ■ When braking the vehicle ● When the brakes are wet, drive more cautiously. Braking distanceincreases when the brakes are wet, and may cause one side of the vehicleto brake differently than the other side. Also the parking brake may notsecurely h...

117 2-1. Driving procedures 2 Wh en drivin g NOTICE ■ If you hear a squealing or scraping noise (brake pad wear limit indica-tors) Have the brake pads checked and replaced by your Toyota dealer as soonas possible. Rotor damage can result if the pads are not replaced when needed. It is dangerous to d...

119 2-1. Driving procedures 2 Wh en drivin g ■ Changing engine switch position “LOCK” The steering wheel is lockedand the key can be removed.(Vehicles with an automatictransmission: The key can beremoved only when the shiftlever is in P.) “ACC” Some electrical componentssuch as the audio system canb...

120 2-1. Driving procedures ■ Turning the engine switch from “ACC” to “LOCK” ■ Steering lock release ■ If the engine does not start The engine immobilizer system may not have been deactivated. ( → P. 68) ■ Key reminder buzzer A buzzer sounds if the driver’s door is opened while the engine switch is ...

121 2-1. Driving procedures 2 Wh en drivin g NOTICE ■ To prevent battery discharge Do not leave the key in the “ACC” or “ON” position for long periods if theengine is not running. ■ When starting the engine ● 2.4 L 4-cylinder (2AZ-FE) engine ⎯ Do not crank for more than 30 sec- onds at a time. This ...

122 2-1. Driving procedures Automatic transmission ∗ Select a shift position appropriate for the driving conditions. ■ Shifting the shift lever Standard type Multi-mode type While the engine switch is in the “ON” position, depress thebrake pedal and move the shift lever. ∗ : If equipped

123 2-1. Driving procedures 2 Wh en drivin g ■ Shift position uses * 1 : Shifting to the D position allows the system to select a gear suitable for driving conditions. Setting the shift lever to the D position is recom-mended for normal driving. * 2 : Selecting shift ranges using S mode restricts th...

125 2-1. Driving procedures 2 Wh en drivin g ■ Shift ranges and their functions A lower shift range will provide greater engine braking forces than ahigher shift range. ■ Downshifting restrictions (standard type) The shift lever cannot be downshifted if the following speeds are exceeded. 2.4 L 4-cyl...

126 2-1. Driving procedures ■ Downshifting restrictions warning buzzer (S mode in multi-mode type) To help ensure safety and driving performance, downshifting operation maysometimes be restricted. In some circumstances, downshifting may not bepossible even when the shift lever is operated. (The warn...

127 2-1. Driving procedures 2 Wh en drivin g Manual transmission ∗ ■ Maximum allowable speeds Observe the following maximum allowable speeds in each gear when maxi-mum acceleration is necessary. 2.4 L 4-cylinder (2AZ-FE) engine (without double wishbone rear suspen-sion) mph (km/h) ■ Shifting the shi...

129 2-1. Driving procedures 2 Wh en drivin g Turn signal lever ■ Turn signals can be operated when The engine switch is in the “ON” position. ■ If the indicators flash faster than usual Check that a light bulb in the front or rear turn signal lights has not burnedout. Right turn Left turn Move and h...

130 2-1. Driving procedures Parking brake ■ Usage in winter time See “Winter driving tips” for parking brake usage in winter time. ( → P. 161) NOTICE ■ Before driving Fully release the parking brake.Driving the vehicle with the parking brake set will lead to brake componentsoverheating, which may af...

131 2-1. Driving procedures 2 Wh en drivin g Horn ■ After adjusting the steering wheel Make sure that the steering wheel is securely locked.The horn may not sound if the steering wheel is not securely locked. ( → P. 54) To sound the horn, press on orclose to the mark.

132 2-2. Instrument cluster Gauges and meters The following gauges, meters and displays illuminate when theengine switch is in the “ON” position. Tachometer Displays the engine speed in revolutions per minute. Speedometer Displays the vehicle speed. Fuel gauge Displays the quantity of fuel remaining...

133 2-2. Instrument cluster 2 Wh en drivin g Engine coolant temperature gauge Displays the engine coolant temperature. Automatic transmission shift position indicator lights (ifequipped) → P. 122 Odometer and trip meter Odometer: Displays the total distance the vehicle has been driven. Trip meter: D...

134 2-2. Instrument cluster Instrument panel light control The brightness of the instrument panel lights can be adjusted. Darker Brighter When the headlight switch isturned on, the brightness will bereduced slightly unless the con-trol button is turned fully clock-wise. ■ Display In the following si...

135 2-2. Instrument cluster 2 Wh en drivin g Indicators and warning lights The indicator and warning lights on the instrument cluster and cen- ter panel inform the driver of the status of the vehicle’s various sys- tems. Instrument cluster Center panel

136 2-2. Instrument cluster ■ Indicators The indicators inform the driver of the operating state of thevehicle’s various systems. * 1 : These lights turn on when the engine switch is turned to the “ON” position to indicate that a system check is being performed. Theywill turn off after the engine is...

137 2-2. Instrument cluster 2 Wh en drivin g CAUTION ■ If a safety system warning light does not come on Should a safety system light such as the ABS or the SRS airbag warninglight not come on when you start the engine, this could mean that these sys-tems are not available to help protect you in an ...

138 2-3. Operating the lights and wipers Headlight switch The headlights can be operated manually. Type A The daytime run-ning lights turn on. The side marker,parking, tail, licenseplate, daytime run-ning lights andinstrument panellights turn on. The headlights andall lights listed above(except dayt...

139 2-3. Operating the lights and wipers 2 Wh en drivin g Turning on the high beam headlights With the headlights on, pushthe lever forward to turn on thehigh beams. Pull the lever back to the centerposition to turn the high beamsoff. Pull the lever toward you toturn on the high beams. Release the l...

141 2-3. Operating the lights and wipers 2 Wh en drivin g Fog light switch ∗ The fog lights improve visibility in difficult driving conditions, such as in rain or fog. They can be turned on only when the headlights are on low beam. Type A Off Front fog lights on ∗ : If equipped

143 2-3. Operating the lights and wipers 2 Wh en drivin g Windshield wipers and washer Wiper can be operated manually. Type A Intermittent wind-shield wiper opera-tion Low speed wind-shield wiper opera-tion High speed wind-shield wiper opera-tion Temporary operation Increases the intermittentwindshi...

144 2-3. Operating the lights and wipers Wash/wipe operation Wipers operate automatically. Type B Intermittent wind-shield wiper opera-tion Low speed wind-shield wiper opera-tion High speed wind-shield wiper opera-tion Temporary operation Increases the intermittentwindshield wiper frequency* Decreas...

145 2-3. Operating the lights and wipers 2 Wh en drivin g ■ The windshield wipers and washers can be operated when The engine switch is in the “ON” position. ■ If no windshield washer fluid sprays Check that the washer nozzles are not blocked and if there is washer fluid inthe windshield washer flui...

146 2-3. Operating the lights and wipers Rear window wiper and washer ∗ ∗ : If equipped Type A Intermittent windowwiper operation Normal windowwiper operation Washer/wiper dualoperation Wiper operates automatically. Washer/wiper dualoperation Wiper operates automatically.

147 2-3. Operating the lights and wipers 2 Wh en drivin g ■ The rear window wiper and washer can be operated when The engine switch is in “ON”. NOTICE ■ When the rear window is dry Do not use the wipers, as they may damage the rear window. ■ When there is no washer fluid spray from the nozzle Damage...

148 2-4. Using other driving systems Cruise control ∗ Use the cruise control to maintain a set speed without depressing the accelerator pedal. Indicators Cruise control switch ■ Setting the vehicle speed Press the “ON-OFF” button toactivate the cruise control. Cruise control indicator willcome on. P...

149 2-4. Using other driving systems 2 Wh en drivin g ■ Adjusting the speed setting To change the set speed, operate the lever until the desired setspeed is obtained. Increases the speed Decreases the speed Fine adjustment: Momentarilymove the lever in the desireddirection. Large adjustment: Hold th...

150 2-4. Using other driving systems ■ Cruise control can be set when ● Automatic transmission:The shift lever is in the D or range 3 (standard type), or in the D or range4 or higher of S has been selected (multi-mode type). ● Vehicle speed is above approximately 25 mph (40 km/h). ■ Accelerating The...

151 2-4. Using other driving systems 2 Wh en drivin g ■ Automatic cruise control cancelation Cruise control will stop maintaining the vehicle speed in any of the followingsituations. ● Actual vehicle speed falls more than approximately 10 mph (16 km/h)below the preset vehicle speed.At this time, the...

152 2-4. Using other driving systems Driving assist systems To help enhance driving safety and performance, the following sys- tems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when ...

153 2-4. Using other driving systems 2 Wh en drivin g When VSC and TRAC are operating If the vehicle is in danger of slip-ping or the front wheels (2WD),or 4 wheels (AWD) spin, the indi-cator flashes to indicate thatVSC/TRAC have been engaged. To disable TRAC and/or VSC If the vehicle gets stuck in ...

154 2-4. Using other driving systems ■ Turning off TRAC and VSC Push and hold the switch whilethe vehicle is stopped to turn offTRAC and VSC. The “TRAC OFF” indicator lightand VSC off indicator light shouldcome on. Push the switch again to turn thesystem back on. ■ When the “TRAC OFF” indicator ligh...

155 2-4. Using other driving systems 2 Wh en drivin g ■ If the slip indicator light comes on There is a malfunction in the TRAC and VSC systems. Contact your Toyotadealer and have your Toyota inspected. ■ EPS system operation sound When the steering wheel is operated, a motor sound (whirring sound) ...

156 2-4. Using other driving systems CAUTION ■ When VSC is activated The slip indicator light flashes. Always drive carefully. Reckless driving maycause an accident. Exercise particular care when the indicator light flashes. ■ When TRAC and VSC are off Be especially careful and drive at a speed appr...

157 2 Wh en drivin g 2-5. Driving information Cargo and luggage Capacity and distribution Cargo capacity depends on the total weight of the occupants. (Cargo capacity) = (Total load capacity) - (Total weight of occupants) Steps for Determining Correct Load Limit ⎯ (1)Locate the statement “The combin...

158 2-5. Driving information (6)If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine howthis reduces the available cargo and luggage load capacity of yourvehicle. ( → P. 166) Example on your vehicle Cargo capacity Tota...

159 2-5. Driving information 2 Wh en drivin g CAUTION ■ Storage precautions Observe the following precautions. Failing to do so may result in death or serious injury. ● To prevent cargo and luggage from sliding forward during braking, donot stack anything in the luggage compartment. Keep cargo and l...

160 2-5. Driving information Vehicle load limits ■ Total load capacity and seating capacity These details are also described on the tire and loading informationlabel. ( → P. 374) CAUTION ■ Overloading the vehicle Do not overload the vehicle.It may not only cause damage to the tires, but also degrade...

161 2-5. Driving information 2 Wh en drivin g Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropri- ate to the prevailing weather conditions. ■ Pre-winter preparations ● Use fluids that are approp...

162 2-5. Driving information Selecting tire chains Snow chains can be mounted on 16- and 17-inch tires. They cannotbe mounted on 18-inch tires. Use the correct snow chain size whenmounting the snow chains. Chain size is regulated for each tire size. Side chain: 0.12 in. (3 mm) in diameter 0.39 in. (...

163 2-5. Driving information 2 Wh en drivin g ■ Snow chain installation (vehicles with 16-inch and 17-inch tires) Observe the following precautions when installing and removing chains. ● Install and remove tire chains in a safe location. ● Install tire chains on the front tires only. Do not install ...

164 2-5. Driving information NOTICE ■ Repairing or replacing snow tires Request repairs of and obtain replacement snow tires from Toyota dealers orlegitimate tire retailers.This is because the removal and attachment of snow tires affects the opera-tion of the tire pressure warning valves and transmi...

166 2-5. Driving information Trailer towing (2.4 L 4-cylinder [2AZ-FE] engine) Towing related terms ■ GCWR (Gross Combination Weight Rating) The maximum allowable grosscombination weight. The grosscombination weight is the sum ofthe total vehicle weight (includingthe occupants, cargo and anyoptional...

167 2-5. Driving information 2 Wh en drivin g ■ GVWR (Gross Vehicle Weight Rating) The maximum allowable grossvehicle weight. The gross vehicleweight is the total weight of thevehicle. When towing a trailer, itis the sum of the vehicle weight(including the occupants, cargoand any optional equipmenti...

168 2-5. Driving information ■ TWR (Trailer Weight Rating) The maximum allowable grosstrailer weight. The gross trailerweight is the sum of the trailerweight and the weight of thecargo in the trailer. TWR is calculated assumingbase vehicle with one driver, onefront passenger, towing package(if avail...

169 2-5. Driving information 2 Wh en drivin g ■ Tongue Weight The load placed on the trailerhitch ball. ( → P. 171) Weight limits ● The gross trailer weight must never exceed the TWR described inthe table. ( → P. 170) ● The gross combination weight must never exceed the GCWRdescribed in the table. (...

171 2-5. Driving information 2 Wh en drivin g Trailer Tongue Weight ● A recommended tongue weight varies in accordance with the typesof trailers or towing as described below. ● To ensure the recommended values shown below, the trailer mustbe loaded by referring to the following instructions. • Tongu...

172 2-5. Driving information Hitch Trailer hitch assemblies have different weight capacities. Toyota rec-ommends the use of Toyota hitch/bracket for your vehicle. For details,contact your Toyota dealer. ● If you wish to install a trailer hitch, contact your Toyota dealer. ● Use only a hitch that con...

173 2-5. Driving information 2 Wh en drivin g Trailer towing tips Your vehicle will handle differently when towing a trailer. Help to avoidan accident, death or serious injury, keep the following in mind whentowing: ● Speed limits for towing a trailer vary by state or province. Do notexceed the post...

174 2-5. Driving information ● Avoid jerky starts or sudden acceleration. ● Avoid jerky steering and sharp turns, and slow down before mak-ing a turn. ● Note that when making a turn, the trailer wheels will be closer thanthe vehicle wheels to the inside of the turn. Compensate by makinga wider than ...

175 2-5. Driving information 2 Wh en drivin g ● Due to the added load of the trailer, your vehicle’s engine mayoverheat on hot days (at temperatures over 85°F [30°C]) whendriving up a long or steep grade. If the engine coolant temperaturegauge indicates overheating, immediately turn off the air cond...

177 2-5. Driving information 2 Wh en drivin g ■ Break-in schedule If your vehicle is new or equipped with any new power train components(such as an engine, transmission, differential or wheel bearing), Toyota rec-ommends that you do not tow a trailer until the vehicle has been driven forover 500 mil...

178 2-5. Driving information ■ If trailer sway occurs One or more factors (crosswinds, passing vehicles, rough roads, etc.) canadversely affect handling of your vehicle and trailer, causing instability. ● If trailer swaying occurs: • Firmly grip the steering wheel. Steer straight ahead. Do not try t...

179 2-5. Driving information 2 Wh en drivin g CAUTION ■ To avoid accident or injury ● Do not exceed the TWR, unbraked TWR, GCWR, GVWR or GAWR. ● Adjust the tongue weight within the appropriate range. Place heavier loadsas close to the trailer axle as possible. ● Do not exceed 65 mph (104 km/h), the ...

180 2-5. Driving information CAUTION ■ Hitch Trailer hitch assemblies have different weight capacities established by thehitch manufacturer. Even though the vehicle may be physically capable oftowing a higher weight, the operator must determine the maximum weightrating of the particular hitch assemb...

181 2-5. Driving information 2 Wh en drivin g Dinghy towing (automatic transmission) NOTICE ■ To avoid serious damage to your vehicle ■ To prevent causing serious damage to the transmission and ActiveTorque Control 4WD system (AWD models) Your vehicle is not designed to be dinghy towed (with 4 wheel...

182 2-5. Driving information Dinghy towing (manual transmission) Towing your vehicle with 4 wheels on the ground To prevent damage to your vehicle, perform the following proceduresbefore towing. Shift the shift lever to N. Switch to the “ACC” position. ( → P. 118) Ensure that the audio system and ot...

183 2-5. Driving information 2 Wh en drivin g NOTICE ■ Dinghy towing direction ■ To prevent the steering from locking Ensure the engine switch is in the “ACC” position. Do not tow the vehicle backwards. Doing so may cause serious damage.

186 3-1. Using the air conditioning system and defogger Air conditioning system Heater Air conditioning system Fan speed control dial Air outlet selection dial Air intake mode switch Temperature control dial Air conditioning ON/OFF switch Fan speed control dial Air outlet selection dial Air intake m...

187 3-1. Using the air conditioning system and defogger 3 Inte rior fe atures Adjusting the settings ■ Adjusting the temperature setting (heater) Turn the temperature control dial clockwise to increase the temper-ature. ■ Adjusting the temperature setting (air conditioning system) Turn the temperatu...

188 3-1. Using the air conditioning system and defogger Air flows to the upper body andfeet. : Some models Mainly air flows to the feet. : Some models Air flows to the feet and thewindshield defogger operates. The air intake is automaticallyswitched to outside air mode. It isnot possible to return t...

189 3-1. Using the air conditioning system and defogger 3 Inte rior fe atures Air flows to the windshield andside windows. The air intake is automaticallyswitched to outside air mode. It isnot possible to return to recircu-lated air mode when the switch ison. ■ Switching air intake modes Press . The...

190 3-1. Using the air conditioning system and defogger Adjusting the position of and opening and closing the air outlets Adjusting the position Direct air flow to the left or right,up or down. Opening and closing Open the vent Close the vent

191 3-1. Using the air conditioning system and defogger 3 Inte rior fe atures ■ For quick cooling (vehicles with air conditioning system) Turn the temperature control dial to the “MAX A/C” position and select therecirculated air mode. ■ For quick clearing of the windshield and side windows (vehicles...

193 3-1. Using the air conditioning system and defogger 3 Inte rior fe atures Rear window and outside rear view mirror defoggers ■ Outside rear view mirror defogger (if equipped) Turning the rear window defogger on will turn the outside rear view mirrordefoggers on. CAUTION ■ Outside rear view mirro...

194 3-2. Using the audio system Audio system types Type A: CD player and AM/FM radio (with CD changer controller) Type B: CD player and AM/FM radio (with CD changer controller)

195 3-2. Using the audio system 3 Inte rior fe atures Language settings (type B only) The language used for all voice guidance, voice recognition and mes-sages may be changed. Press . Press (MORE). Press (LANG). Press that corresponds to the desired language. For vehicles sold in the U.S.A. “ENG” (E...

196 3-2. Using the audio system CAUTION ■ For vehicles sold in U.S.A. and Canada ● Part 15 of the FCC Rules FCC Warning:Any unauthorized changes or modifications to this equipment will void theuser’s authority to operate this device. ● Laser products • Do not take this unit apart or attempt to make ...

197 3-2. Using the audio system 3 Inte rior fe atures Using the radio Type A Type B Volume Seeking a frequency Station selector AM/FM mode buttons Adjusting the frequency Power Scanning for receivable stations Power Adjusting the frequency (AM, FM mode) or channel (SAT mode) Displaying radio text me...

200 3-2. Using the audio system ■ Displaying text information Press . Each time is pressed, the display changes in the following order: Title (song/program title) → Name (artist name/feature) / Title (song/pro- gram title). ■ Reception sensitivity ● Cargo loaded on the roof luggage carrier, especial...

201 3-2. Using the audio system 3 Inte rior fe atures ■ XM ® Satellite Radio An XM ® Satellite Radio is a tuner designed exclusively to receive broadcasts provided under a separate subscription. Availability is limited to the 48 con-tiguous states and 10 Canadian provinces. ● XM ® subscriptions For ...

203 3-2. Using the audio system 3 Inte rior fe atures Contact the XM ® Listener Care Center at 1-800-967-2346 (U.S.A.) or 1-877- 438-9677 (Canada). ■ Certifications for the radio tuner This device complies with Part 15 of the FCC Rules and RSS-210 Rules.Operation is subject to the following two cond...

204 3-2. Using the audio system Using the CD player Type A Type B Volume Random playback Selecting a track Repeat play Playback Power CD eject Displaying text messages Searching playback Reverse Fast-forward Power Volume Searching playback CD eject Selecting a track/ fast-forwarding and rewinding Di...

206 3-2. Using the audio system Selecting a CD (with a CD changer) ■ Selecting a CD to play Press or . ■ Scanning loaded CDs Press and hold until you hear a beep. The first ten seconds of the first track on each CD will be played. To cancel, press again. Press again when the desired CD is reached. P...

207 3-2. Using the audio system 3 Inte rior fe atures Random playback ■ Current CD Press (RAND) or (RDM). Songs are played in random order. To cancel, press the button once more (without a CD changer), or twicemore (with a CD changer). ■ All CDs (with a CD changer) Type A Press and hold (RAND) until...

209 3-2. Using the audio system 3 Inte rior fe atures NOTICE ■ CDs and adapters that cannot be used Do not use the following types of CDs, 3 in. (8 cm) CD adapters or DualDisc.Doing so may damage the CD player and/or the CD insert/eject function. ● CDs that have a diameter that is not 4.7in. (12 cm)...

210 3-2. Using the audio system NOTICE ■ CD player precautions Failure to follow the precautions below may result in serious damage to theCDs or the player itself. ● Do not insert anything other than CDs into the CD slot. ● Do not apply oil to the CD player. ● Store CDs away from direct sunlight. ● ...

211 3-2. Using the audio system 3 Inte rior fe atures Playing MP3 and WMA discs Type A Type B Volume Random playback Selecting a file Repeat play Playback Power CD eject Displaying text messages Searching playback Selecting a folder Selecting a file Reverse Fast-forward Power Volume Displaying text ...

213 3-2. Using the audio system 3 Inte rior fe atures Fast-forwarding and reversing files Type A Press (reverse) or (fast-forward). Type B Press and hold “ ∧ ” or “ ∨ ” on . Playing and pausing files (type B only) Press . Repeat play ■ Repeating a file Press (RPT) or (RPT). To cancel, press the butt...

214 3-2. Using the audio system Random playback ■ Playing files from a particular folder in random order Press (RAND) or (RDM). To cancel, press the button once more (without a CD changer), or twicemore (with a CD changer). ■ Playing all of the files on a disc in random order Type A Press and hold (...

216 3-2. Using the audio system ■ MP3 and WMA files MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by usingMP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses ...

219 3-2. Using the audio system 3 Inte rior fe atures NOTICE ■ CDs that cannot be used ( → P. 209) ■ CD player precautions ( → P. 210)

220 3-2. Using the audio system Operating an iPod ∗ ∗ : If equipped Connecting an iPod enables you to enjoy music from the vehicle speakers. ■ Connecting an iPod Open the cover and connect an iPod using an iPod cable. Turn on the power of the iPod if it is not turned on. Press . STEP 1 STEP 2

221 3-2. Using the audio system 3 Inte rior fe atures ■ Control panel Power Volume Selector knob Displaying text messages Selector buttons Playback Playback/pause Selecting a track/ fast-forwarding and rewinding

222 3-2. Using the audio system Selecting a play mode Press (BROWSE) to select iPod menu mode. Press that corresponds to the desired play mode. Pressing (MORE) to change to the second selection list. ■ Play mode list Depending on the model, the name of your iPod may be displayed atthe top of the lis...

223 3-2. Using the audio system 3 Inte rior fe atures ■ Selecting a list Turn to display the first selection list. Press to select the desired item. Repeat the same procedure to select the desired song name. To return to the previous selection list, press ( ). Selecting songs from a song list Press ...

225 3-2. Using the audio system 3 Inte rior fe atures Switching the display Press . Each time is pressed, the display changes in the following order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time ■ About iPod ● Apple is not responsible for the operation of...

226 3-2. Using the audio system ■ Compatible models Depending on differences between models or software version etc., somemodels listed above might be incompatible with this system. iPod 4th generation and earlier models are not compatible with this system. iPhone, iPod mini, iPod shuffle and iPod p...

227 3-2. Using the audio system 3 Inte rior fe atures Operating a USB memory ∗ Connecting a USB memory enables you to enjoy music from the vehicle speakers. ■ Connecting a USB memory Open the cover and connect a USB memory. Turn on the power of the USB memory if it is not turned on. Press . STEP 1 S...

231 3-2. Using the audio system 3 Inte rior fe atures ■ USB memory functions Depending on the USB memory that is connected to the system, certainfunctions may not be available. Disconnecting the device and reconnecting itonce again may resolve some malfunctions. ■ Error messages “USB ERROR”: This in...

234 3-2. Using the audio system NOTICE ■ To prevent damage to a USB memory ● Do not leave a USB memory in the vehicle. The temperature inside maybecome high, resulting in damage to the player. ● Do not push down on or apply unnecessary pressure to the USB memorywhile it is connected as this may dama...

235 3-2. Using the audio system 3 Inte rior fe atures Optimal use of the audio system Type A Type B Adjusting the sound quality and ASL Adjusting the sound quality and ASL Selector buttons Menu button

237 3-2. Using the audio system 3 Inte rior fe atures Type B *: The sound quality level is adjusted individually in each audio mode. ■ Adjusting the Automatic Sound Levelizer (ASL) Type A When “ASL” is selected, turning to the right changes the amount of “ASL” in the order of “LOW”, “MID” and “HIGH”...

238 3-2. Using the audio system Type B Press . Press (MORE). Press (ASL). Press that corresponds to the desired mode (LOW, MID, HIGH or OFF). ASL automatically adjusts the volume and tone quality accordingto vehicle speed. ■ Setting the number of preset pages (type B only) The number of preset pages...

239 3-2. Using the audio system 3 Inte rior fe atures Using the AUX port This port can be used to connect a portable audio device and listen to it through the vehicle’s speakers. Type A Open the cover and connectthe portable audio device. Press . Type B Open the cover and connectthe portable audio d...

241 3-2. Using the audio system 3 Inte rior fe atures Using the steering wheel audio switches Turning on the power Press when the audio system is turned off. The audio system can be turned off by holding down until you hear a beep. Some audio features can be controlled using the switches on the stee...

243 3-2. Using the audio system 3 Inte rior fe atures Selecting a track/file or song Press to select CD, iPod, USB memory or Bluetooth ® audio mode. Press “ ∧ ” or “ ∨ ” on to select the desired track/file or song. Selecting a folder or album Press to select CD, USB memory or Bluetooth ® audio mode....

244 3-3. Using the Bluetooth ® audio system Bluetooth ® audio system ∗ ■ Conditions under which the system will not operate ● If using a portable player that does not support Bluetooth ® ● If the portable player is switched off ● If the portable player is not connected ● If the portable player’s bat...

245 3-3. Using the Bluetooth ® audio system 3 Inte rior fe atures ■ When transferring ownership of the vehicle Be sure to initialize the system to prevent personal data from being improp-erly accessed. ( → P. 287) ■ About Bluetooth ® ■ Compatible models ● Bluetooth ® specifications: Ver. 1.2 ● Follo...

246 3-3. Using the Bluetooth ® audio system CAUTION ■ FCC WARNING Changes or modifications not expressly approved by the party responsiblefor compliance could void the user's authority to operate the equipment. Radio Frequency Radiation Exposure. This equipment complies with FCC/IC radiation exposur...

247 3-3. Using the Bluetooth ® audio system 3 Inte rior fe atures Using the Bluetooth ® audio system ■ Audio unit Display Track title, Artist name,Album name, Elapsed time,“Streaming Audio”, etc. isdisplayed. Selects items such as menuand numberTurn: Selects an itemPress: Inputs the selecteditem Blu...

248 3-3. Using the Bluetooth ® audio system ■ Microphone Vehicles with moon roof Vehicles without moon roof

249 3-3. Using the Bluetooth ® audio system 3 Inte rior fe atures Operating the system using voice commands By following voice guidance instructions output from the speaker, voice commands enable the operation of the Bluetooth ® audio sys- tem without the need to check the display or operate . ■ Ope...

251 3-3. Using the Bluetooth ® audio system 3 Inte rior fe atures Input the passkey into the portable player. Refer to the manual that comes with the portable player for the oper-ation of the portable player. Guidance for registration completion is heard. If the portable player has a Bluetooth ® pho...

252 3-3. Using the Bluetooth ® audio system ■ When using a voice command For numbers, say a combination of single digits from zero to nine. Say the command correctly and clearly. ■ Situations where the system may not recognize your voice ● When driving on rough roads ● When driving at high speeds ● ...

253 3-3. Using the Bluetooth ® audio system 3 Inte rior fe atures Operating a Bluetooth ® enabled portable player Selecting an album Press “ ∨ ” or “ ∧ ” on . Selecting tracks Press “ ∧ ” or “ ∨ ” on . Playing and pausing tracks Press . Volume Power Playback/pause Displaying text messages Selector k...

254 3-3. Using the Bluetooth ® audio system Fast-forwarding and reversing tracks Press and hold “ ∧ ” or “ ∨ ” on . Switching the display Press . Each time is pressed, the display changes in the following order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed tim...

255 3-3. Using the Bluetooth ® audio system 3 Inte rior fe atures Setting up a Bluetooth ® enabled portable player Registering a portable player in the Bluetooth ® audio system allows the system to function. The following functions can be used for reg- istered portable players: ■ Functions and opera...

256 3-3. Using the Bluetooth ® audio system Registering a portable player Select “Pair Audio Players (Pair audio player)” using a voice com- mand or , and perform the procedure for registering a portable player. ( → P. 250) Selecting a portable player to be used Select “Select Audio Player” using a ...

257 3-3. Using the Bluetooth ® audio system 3 Inte rior fe atures Press the talk switch and say “From car” or “From audio”, and select “Confirm” using a voice command or . If “From car” is selected, the portable player will be automaticallyconnected whenever the engine switch is in either the “ACC” ...

258 3-3. Using the Bluetooth ® audio system Listing the registered portable players Select “List Audio Players” using a voice command or . The list of registered portable players will be read aloud.When listing is complete, the system returns to “BT Audio Setup”. Pressing the talk switch while the n...

259 3-3. Using the Bluetooth ® audio system 3 Inte rior fe atures Deleting a registered portable player Select “Delete Audio Player” using a voice command or . Select the portable player to be deleted by either of the follow-ing methods and select “Confirm” using a voice command or : a. Press the ta...

260 3-3. Using the Bluetooth ® audio system Bluetooth ® audio system setup ■ System setup items and operation procedures → P. 285

261 3 Inte rior fe atures 3-4. Using the hands-free phone system (for cellular phone) Hands-free phone system (for cellular phone) features ∗ ∗ : If equipped This system supports Bluetooth ® , which allows you to make or receive calls without using cables to connect a cellular phone and the system, ...

263 3-4. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures ■ Conditions under which the system will not operate ● If using a cellular phone that does not support Bluetooth ® ● If the cellular phone is switched off ● If you are outside service range ● If the cellular phone ...

264 3-4. Using the hands-free phone system (for cellular phone) ■ About Bluetooth ® ■ Certification for the hands-free phone system FCC ID: L2C0045TRIC ID: 3432A-0045TRMADE IN MEXICO This device complies with Part 15 of the FCC Rules and RSS-210 Rules.Operation is subject to the following two condit...

265 3-4. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures NOTICE ■ To prevent damage to a cellular phone Do not leave a cellular phone in the vehicle. The temperature inside maybecome high resulting in damage to the phone.

266 3-4. Using the hands-free phone system (for cellular phone) Using the hands-free phone system ∗ (for cellular phone) ■ Audio unit DisplayA message, name, phonenumber, etc. is displayed. Lower-case characters andspecial characters, such asan umlaut, cannot be dis-played. Selects speed dials Selec...

267 3-4. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures ■ Steering wheel telephone switches Volume The voice guidance volumecannot be adjusted using thisbutton. Off-hook switch Turns the hands-free sys-tem on/starts a call On-hook switch Turns the hands-free sys-tem off...

269 3-4. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures Operating the system using a voice command By following voice guidance instructions output from the speaker,voice commands enable the operation of the hands-free phone sys- tem without the need to check the display...

270 3-4. Using the hands-free phone system (for cellular phone) Using the hands-free phone system for the first time Before using the hands-free phone system, it is necessary to registera cellular phone in the system. The phone registration mode will beentered automatically when starting the system ...

274 3-4. Using the hands-free phone system (for cellular phone) ■ Using a short cut key First menu Second menu Operation detail Dial “XXX (name)” - Dialing a number registered in the phone book Dial “XXX (number)” - Dialing the input numbers Phone book add entry - Adding a new number Phone book chan...

275 3-4. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures ■ Automatic adjustment of volume When vehicle speed reaches 50 mph (80 km/h) or more, the volume auto-matically increases. The volume returns to the previous volume setting whenvehicle speed drops to 43 mph (70 km/...

276 3-4. Using the hands-free phone system (for cellular phone) Making a phone call Dialing by inputting a number Press the talk switch and say “Dial by number”. Press the talk switch and say the phone number. Dial by one of the following methods: a. Press the off-hook switch. b. Press the talk swit...

277 3-4. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures Dialing by inputting a name Press the talk switch and say “Dial by name”. Select a registered name to be input by either of the followingmethods: a. Press the talk switch and say a registered name. b. Press the tal...

279 3-4. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures The following operations can be performed: Dialing: Press the off-hook switch or select “Dial” using a voice command or . Storing the number in the phone book: Select “Store” using a voice command or . Deleting: Se...

280 3-4. Using the hands-free phone system (for cellular phone) Setting a cellular phone Registering a cellular phone Select “Pair Phone” using a voice command or , and perform the procedure for registering a cellular phone. ( → P. 270) Registering a cellular phone in the hands-free phone system all...

281 3-4. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures Selecting the cellular phone to be used Select “Select Phone” using a voice command or . Pattern A Select the cellular phone to be used by either of the followingmethods, and select “Confirm” using a voice command ...

282 3-4. Using the hands-free phone system (for cellular phone) Select the name of the cellular phone to be changed by eitherof the following methods: a. Press the talk switch and say the desired phone name, and select “Confirm” using a voice command or . b. Press the talk switch and say “List phone...

283 3-4. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures Deleting a cellular phone Select “Delete Phone” using a voice command or . Select a cellular phone to be deleted by either of the followingmethods and select “Confirm” using a voice command or : a. Press the talk s...

284 3-4. Using the hands-free phone system (for cellular phone) Turning the hands-free phone automatic connection on/off ■ Turning off the automatic connection Select “Handsfree Power” using a voice command or . Select “Turn off” using a voice command or . ■ Turning on the automatic connection Selec...

285 3-4. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures Security and system setup Setting or changing the PIN ■ Setting a PIN Select “Set PIN” using a voice command or . Enter a PIN using a voice command or . When using , input the code 1 digit at a time. To enter the m...

286 3-4. Using the hands-free phone system (for cellular phone) ■ Changing the PIN Select “Set PIN” using a voice command or . Enter the registered PIN using a voice command or . Enter a new PIN using a voice command or . When using , input the code 1 digit at a time. Locking or unlocking the phone ...

287 3-4. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures Setting voice guidance volume Select “Guidance Vol” using . Change the voice guidance volume. To decrease the volume: Turn counterclockwise. To increase the volume: Turn clockwise. Initialization Select “Reset Sett...

289 3-4. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures Using the phone book Adding a new phone number The following methods can be used to add a new phone number: ● Inputting a phone number using a voice command ● Transferring data from the cellular phone ● Inputting a...

290 3-4. Using the hands-free phone system (for cellular phone) ■ Adding procedure Select “Add Entry” using a voice command or . Use one of the following methods to input a telephone num-ber: Inputting a telephone number using a voice command STEP2-1 Select “By Voice (By voice)” using a voice comman...

292 3-4. Using the hands-free phone system (for cellular phone) Select the name to be registered by either of the followingmethods, and select “Confirm” using a voice command or : a. Press the talk switch and say the desired name. b. Select “Record Name” using , and say the desired name. Select “Con...

293 3-4. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures Select the desired preset button, and register the data intospeed dial by either of the following methods: a. Press the desired preset button, and select “Confirm” using a voice command or . b. Press and hold the d...

295 3-4. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures Listing the registered data Selecting “List names” using a voice command causes a list of theregistered data to be read aloud. When listing is complete, the system returns to “Phonebook”.Pressing the talk switch wh...

296 3-5. Using the interior lights Interior lights list Personal/interior lights or personal lights ( → P. 298, 299) Interior lights ( → P. 297)

297 3-5. Using the interior lights 3 Inte rior fe atures Interior light “DOOR” position Off On ■ Illuminated entry system Vehicles with moon roof When the light switch is in the “DOOR” position, the interior lights and per-sonal/interior lights automatically turn on/off according to the engine switc...

298 3-5. Using the interior lights Personal/interior lights (vehicles with moon roof) ■ Interior lights “DOOR” position Off On ■ Personal lights On/off Personal/interior lights

299 3-5. Using the interior lights 3 Inte rior fe atures Personal lights (vehicles without moon roof) On/off Personal lights

300 3-6. Using the storage features List of storage features CAUTION ■ Items that should not be left in the storage spaces Do not leave glasses, lighters or spray cans in the storage spaces, as thismay cause the following when cabin temperature becomes high: ● Glasses may be deformed by heat or crac...

301 3-6. Using the storage features 3 Inte rior fe atures Glove box Pull up the lever. Console box Lift the lid while pulling the lever. CAUTION ■ Caution while driving Keep the glove box closed. In the event of sudden braking or sudden swerv-ing, an accident may occur due to an occupant being struc...

302 3-6. Using the storage features Cup holders Front Rear Pull the lid to open. ■ Using the cup holder (front) to store small items Remove the cup holder inserts. Cup holders

303 3-6. Using the storage features 3 Inte rior fe atures ■ Adjusting the cup holder to the size of the cups or drink-cans ■ Cup holder inserts (front) CAUTION ■ Items unsuitable for the cup holder Do not place anything other than cups or beverage cans in the cup holders.Other items may be thrown ou...

304 3-6. Using the storage features Bottle holders Front Rear CAUTION ■ Items unsuitable for the bottle holder Do not place anything other than pet bottles in the bottle holders.Other items may be thrown out of the holders in the event of an accident orsudden braking and cause injury. Bottle holders

305 3-6. Using the storage features 3 Inte rior fe atures Auxiliary boxes Front Pull up the lever. Overhead console (vehicles with moon roof) Push the lid. NOTICE ■ When a pet bottle is in the front bottle holder (vehicles with manualwindow) As there is a possibility of interfering witha manual wind...

307 3 Inte rior fe atures 3-7. Other interior features Sun visors Forward position: Flip down. Side position: Flip down, unhook, andswing to the side.

308 3-7. Other interior features Vanity mirrors Slide the cover.

309 3-7. Other interior features 3 Inte rior fe atures Clock ■ The clock is displayed when The engine switch is in the “ACC” or “ON” position. Adjusts the hour. Adjusts the minutes. Rounds to the nearesthour.* *: e.g. 1:00 to 1:29 → 1:00 1:30 to 1:59 → 2:00

310 3-7. Other interior features Ashtrays ∗ CAUTION ■ When not in use Keep the ashtray closed.Injuries may result in the event of sudden braking, sudden swerving or anaccident. ■ To prevent fire ● Fully extinguish matches and cigarettes before putting them in the ashtray,then make sure the ashtray i...

311 3-7. Other interior features 3 Inte rior fe atures Cigarette lighter ∗ ■ The cigarette lighter can be used when The engine switch is in the “ACC” or “ON” position. CAUTION ■ To avoid burns or fires ● Do not touch the metal parts of the cigarette lighter. ● Do not hold the cigarette lighter down....

312 3-7. Other interior features Power outlet ∗ ■ The power outlet can be used when 12 V The engine switch is in the “ACC” or “ON” position. 115 V The engine switch is in the “ON” position. The power outlet can be used for a following component. 12 V: Accessories that run on less than 10 A.115 V: Ac...

313 3-7. Other interior features 3 Inte rior fe atures NOTICE ■ To avoid damaging the power outlet Close the power outlet lid when the power outlet is not in use.Foreign objects or liquids that enter the power outlet may cause a short cir-cuit. ■ To prevent the fuse from being blown 12 V Do not use ...

314 3-7. Other interior features Grocery bag hook This hook is designed to hang things like grocery bag. Cabin Press the hook. Luggage compartment

315 3-7. Other interior features 3 Inte rior fe atures NOTICE ■ Grocery bag hook weight capacity Cabin Do not hang any object heavier than 44 lb. (20 kg) on the grocery bag hook. Luggage compartment Do not hang any object heavier than 7 lb. (3 kg) on the grocery bag hooks.

316 3-7. Other interior features Seatback table ∗ CAUTION ■ Caution while driving Observe the following precautions to avoid death or serious injury. ● Do not set up the seatback table. ● Do not sit on or place anything on the seatback table. NOTICE ■ To prevent damage to the seatback table Do not p...

317 3-7. Other interior features 3 Inte rior fe atures Floor mat CAUTION Observe the following precautions. Failure to do so may cause the driver's floor mat to slip, possibly interferingwith the pedals while driving. An unexpectedly high speed may result or it maybecome difficult to stop the vehicl...

318 3-7. Other interior features Luggage compartment feature ■ Cargo hooks Cargo hooks are provided forsecuring loose items. ■ Tie-down belts To tighten To loosen To hook To unhook

320 3-7. Other interior features ■ Grocery bag hooks ( → P. 314) ■ Tonneau cover (if equipped) Remove the deck board. Take out the bag. Remove the tonneau coverfrom the bag. STEP 1 STEP 2 STEP 3

322 3-7. Other interior features Folding the tonneau cover Hold the tonneau cover with bothhands. Point your thumbs inopposite directions. Bend one side of the covertowards you. Twist the other side in the oppo-site direction, as shown in theillustration. STEP 1 STEP 2 STEP 3

324 3-7. Other interior features CAUTION ■ When unfolding the tonneau cover Be careful not to hit yourself when unfolding the tonneau cover. ■ Caution while driving Keep the deck boards locked.Injuries may result in the event of an accident or sudden braking.

325 3-7. Other interior features 3 Inte rior fe atures Compass ∗ The compass on the inside rear view mirror indicates the direction in which the vehicle is heading. ■ Operation To turn the compass on or off,press and hold “AUTO” for 3seconds. ■ Displays and directions Display Direction N North NE No...

327 3-7. Other interior features 3 Inte rior fe atures ■ Circling calibration Stop the vehicle in a place where it is safe to drive in a circle. Press and hold “AUTO” for 9seconds. C appears on the compass dis-play. Drive the vehicle at 5 mph (8 km/h) or less in a circle until adirection is displaye...

328 3-7. Other interior features CAUTION ■ While driving the vehicle Do not adjust the display. Be sure to adjust the display only when the vehicleis stopped. ■ When doing the circling calibration Be sure to secure a wide space, and watch out for people and vehicles in theneighborhood. Do not violat...

330 4-1. Maintenance and care Cleaning and protecting the vehicle exterior ■ Automatic car washes ● Before washing the vehicle, do the following. • Fold the mirrors back.• Remove the antenna. ● Brushes used in automatic car washes may scratch the vehicle surfaceand harm your vehicle's paint. ■ High ...

331 4-1. Maintenance and care 4 Mainten ance an d ca re ■ Aluminum wheels ● Remove any dirt immediately by using a neutral detergent. Do not usehard brushes or abrasive cleaners. Do not use strong or harsh chemicalcleaners. Use the same mild detergent and wax as used on the paint. ● Do not use deter...

332 4-1. Maintenance and care NOTICE ■ To prevent paint deterioration and corrosion on the body and compo-nents (aluminum wheels etc.) ● Wash the vehicle immediately in the following cases: • After driving near the sea coast• After driving on salted roads• If you see coal tar or tree sap on the pain...

333 4-1. Maintenance and care 4 Mainten ance an d ca re Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle's interior and keep it in top condition: ■ Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty sur-faces wi...

334 4-1. Maintenance and care ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a yearto maintain the quality of the vehicle's interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use asponge or brush to apply...

335 4-1. Maintenance and care 4 Mainten ance an d ca re NOTICE ■ Cleaning detergents ● Do not use organic substances such as benzene or gasoline, acidic oralkaline solutions, dye, bleach or other detergent. Doing so may discolorthe vehicle interior or cause streaks or damage to painted surfaces. ● D...

336 4-2. Maintenance Maintenance requirements ■ Repair and replacement It is recommended that genuine Toyota parts be used for repair to ensureperformance of each system. If non-Toyota parts are used in replacement orif a repair shop other than a Toyota dealer performs repairs, confirm the war-ranty...

337 4-2. Maintenance 4 Mainten ance an d ca re ■ Reset the maintenance data (U.S.A. only) After the required maintenance is performed according to the maintenanceschedule, please reset the maintenance data.To reset the data, follow the procedures described below: Turn the engine switch OFF with the ...

338 4-2. Maintenance General maintenance Engine compartment Items Check points Battery Check the connections. ( → P. 361) Brake fluid At the correct level? ( → P. 359) Engine coolant At the correct level? ( → P. 357) Engine oil At the correct level? ( → P. 353) Exhaust system No fumes or strange sou...

339 4-2. Maintenance 4 Mainten ance an d ca re Vehicle interior Items Check points Accelerator pedal • Moves smoothly (without uneven pedal effort or catching)? Automatic transmission “Park” mechanism • Can the vehicle be held securely on an incline with the shift lever in P? Brake pedal • Moves smo...

340 4-2. Maintenance Vehicle exterior Items Check points Doors • Operate smoothly? Engine hood • The lock system works properly? Fluid leaks • Is there any leakage after park- ing? Tires • Inflation pressure is correct?• Tire surfaces not worn or dam- aged? • Tires rotated according to the maintenan...

341 4-2. Maintenance 4 Mainten ance an d ca re Emission inspection and maintenance (I/M) programs Some states have vehicle emission inspection programs which include OBD (On Board Diagnostics) checks. The OBD system moni- tors the operation of the emission control system. ■ If the malfunction indica...

343 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Items Parts and tools Fuses ( → P. 385) • Fuse with same amperage rating as original Radiator and condenser ( → P. 358) ⎯ Tire inflation pressure ( → P. 374) • Tire pressure gauge• Compressed air source Washer fluid ( → P. 363) • Water wa...

344 4-3. Do-it-yourself maintenance CAUTION The engine compartment contains many mechanisms and fluids that maymove suddenly, become hot, or become electrically energized. To avoid deathor serious injury observe the following precautions. ■ When working on the engine compartment ● Keep hands, clothi...

345 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re NOTICE ■ If you remove the air cleaner Driving with the air cleaner removed may cause excessive engine wear dueto dirt in the air. Also, a backfire could cause a fire in the engine compart-ment.

346 4-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood release lever. The hood will pop up slightly. Lift the auxiliary catch leverand lift the hood. Hold the hood open by insert-ing the supporting rod into theslot. STEP 1 STEP 2 STEP...

347 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION ■ Pre-driving check Check that the hood is fully closed and locked.If the hood is not locked properly, it may open while the vehicle is in motionand cause an accident, which may result in death or serious injury. ■ After installin...

348 4-3. Do-it-yourself maintenance Positioning a floor jack When raising your vehicle with a floor jack, position the jack cor- rectly. Improper placement may damage your vehicle or cause injury. ■ Front 1.8 L 4-cylinder (2ZR-FE) engine 2.4 L 4-cylinder (2AZ-FE) engine

349 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Rear 2WD models without 18-inch tires 2WD models with 18-inch tires AWD models

350 4-3. Do-it-yourself maintenance CAUTION ■ When raising your vehicle Make sure to observe the following to reduce the possibility of death or seri-ous injury. ● When using a floor jack, follow the instructions of the manual provided withthe jack. ● Do not use the jack that was supplied with your ...

353 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Engine oil With the engine at operating temperature and turned off, check the oillevel on the dipstick. ■ Checking the engine oil Park the vehicle on level ground. After warming up the engineand turning it off, wait more than 5 minutes fo...

354 4-3. Do-it-yourself maintenance 2.4 L 4-cylinder (2AZ-FE) engine Low Full ■ Adding engine oil If the oil level is below or nearthe low level mark, add engineoil of the same type as already inthe engine. Make sure to check the oil type and prepare the items needed beforeadding oil. Remove the oil...

355 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Engine oil consumption ● The amount of engine oil consumed depends on the oil viscosity, thequality of the oil and the way the vehicle is driven. ● More oil is consumed under driving conditions such as high speeds andfrequent accelerati...

356 4-3. Do-it-yourself maintenance NOTICE ■ To prevent serious engine damage Check the oil level on a regular basis. ■ When replacing the engine oil ● Be careful not to spill engine oil on the vehicle components. ● Avoid overfilling, as the engine could be damaged. ● Check the oil level on the dips...

357 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Engine coolant The coolant level is satisfactory if it is between the “FULL” and “LOW”lines on the reservoir when the engine is cold. Reservoir cap “FULL” “LOW” If the level is on or below the“LOW” line, add coolant up to the“FULL” line. ...

358 4-3. Do-it-yourself maintenance Radiator and condenser Check the radiator and condenser and remove any foreign objects. If any of the above parts are extremely dirty or you are not sure oftheir condition, have your vehicle checked by your Toyota dealer. NOTICE ■ When adding engine coolant Coolan...

359 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Brake fluid ■ Checking fluid level The brake fluid level should bebetween the “MAX” and “MIN”lines on the tank. Make sure to check the fluid type and prepare the necessary items. ■ Adding fluid Make sure to check the fluid type and prepar...

360 4-3. Do-it-yourself maintenance Disconnect the claws andremove the service cover. Remove the reservoir cap. Add brake fluid slowly while checking the fluid level. STEP 2 STEP 3 ■ Brake fluid can absorb moisture from the air Excess moisture in the fluid can cause a dangerous loss of braking effi-...

361 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Battery Check the battery as follows. ■ Battery exterior Make sure that the battery terminals are not corroded and thatthere are no loose connections, cracks, or loose clamps. Terminals Hold-down clamp Ground cable NOTICE ■ If the fluid l...

362 4-3. Do-it-yourself maintenance CAUTION ■ Chemicals in the battery A battery contains poisonous and corrosive sulfuric acid and may producehydrogen gas which is flammable and explosive. To reduce the risk of deathor serious injury, take the following precautions while working on or near thebatte...

363 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Washer fluid For vehicles sold in U.S.A. If any washer does not work, the washer tank may be empty. Open the lid. Add washer fluid. For vehicles sold in Canada If any washer does not work or the low windshield washer fluid levelwarning li...

364 4-3. Do-it-yourself maintenance CAUTION ■ When refilling the washer fluid Do not refill the washer fluid when the engine is hot or running, as thewasher fluid contains alcohol and may catch fire if spilled on the engineetc. NOTICE ■ Do not use any fluid other than washer fluid Do not use soapy w...

365 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Tires Replace or rotate tires in accordance with maintenance sched- ules and treadwear. ■ Checking tires New tread Treadwear indicator Worn tread The location of treadwearindicators is shown by the“TWI” or “ ” marks, etc., molded on the s...

366 4-3. Do-it-yourself maintenance Installing tire pressure warning valves and transmitters When replacing tires or wheels, tire pressure warning valves andtransmitters must also be installed. When new tire pressure warning valves and transmitters areinstalled, new tire pressure warning valve and t...

367 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ How to initialize the tire pressure warning system Park the vehicle in a safe place and turn the engine switchOFF. While the vehicle is moving, initialization is not performed. Adjust the tire inflation pressure to the specified cold ti...

368 4-3. Do-it-yourself maintenance Registering ID codes The tire pressure warning valve and transmitter is equipped with aunique ID code. When replacing a tire pressure warning valve andtransmitter, it is necessary to register the ID code of tire pressurewarning valve and transmitter. Have the ID c...

369 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ When the initialization of the tire pressure warning system hasfailed Initialization can be completed in a few minutes. However, in the follow-ing cases, the settings have not been recorded and the system will notoperate properly. If re...

370 4-3. Do-it-yourself maintenance ■ Tire types 1 Summer tires Summer tires are high-speed performance tires best suited to highwaydriving under dry conditions. Since summer tires do not have the sametraction performance as snow tires, summer tires are inadequate fordriving on snow-covered or icy r...

371 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Tire pressure warning system certification FCC ID: PAXPMV107J FCC ID: HYQ13BCX For vehicles sold in the U.S.A. This device complies with Part 15 of the FCC Rules. Operation is subjectto the following two conditions: (1) This device may ...

372 4-3. Do-it-yourself maintenance CAUTION ■ When inspecting or replacing tires Observe the following precautions to prevent accidents. Failure to do somay cause damage to parts of the drive train, as well as dangerous han-dling characteristics, which may lead to an accident resulting in death orse...

373 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re NOTICE ■ Repairing or replacing tires, wheels, tire pressure warning valves,transmitters and tire valve caps ● When removing or fitting the wheels, tires or the tire pressure warningvalves and transmitters, contact your Toyota dealer as t...

374 4-3. Do-it-yourself maintenance Tire inflation pressure ■ Tire inflation pressure The recommended cold tire inflation pressure and tire size is dis-played on the tire and loading information label. ( → P. 467)

375 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Tire inflation pressure check interval You should check tire inflation pressure every two weeks, or at leastonce a month.Do not forget to check the spare. ■ Inspection and adjustment procedure Tire valve Tire pressure gauge Remove the t...

376 4-3. Do-it-yourself maintenance ■ Effects of incorrect tire inflation pressure Driving with incorrect tire inflation pressure may result in the following: ● Reduced fuel efficiency ● Reduced driving comfort and tire life ● Reduced safety ● Damage to the drive train If a tire needs frequent refil...

377 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION ■ Proper inflation is critical to save tire performance Keep your tires properly inflated. Otherwise, the following conditionsmay occur and result in an accident causing death or serious injury. ● Excessive wear ● Uneven wear ● Po...

378 4-3. Do-it-yourself maintenance Wheels If a wheel is bent, cracked or heavily corroded, it should be replaced. Otherwise, the tire may separate from the wheel or cause loss of handling control. ■ Wheel selection When replacing wheels, care should be taken to ensure thatthey are equivalent to tho...

379 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ When replacing wheels The wheels of your Toyota, except for the compact spare tire, areequipped with tire pressure warning valves and transmitters that allowthe tire pressure warning system to provide advanced warning in theevent of a l...

380 4-3. Do-it-yourself maintenance NOTICE ■ Replacing tire pressure warning valves and transmitters ● Because tire repair or replacement may affect the tire pressure warn-ing valves and transmitters, make sure to have tires serviced by yourToyota dealer or other qualified service shop. In addition,...

381 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. ■ Removal method Turn the engine switch OFF. Open the glove box. Slide offthe damper. Push in each side of the glovebox...

382 4-3. Do-it-yourself maintenance ■ Checking interval Replace the air conditioning filter according to the maintenance schedule. Industy areas or areas with heavy traffic flow, early replacement may berequired. (For scheduled maintenance information, please refer to the“Scheduled Maintenance Guide...

383 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Key battery (vehicles with wireless remote control) Replace the battery with a new one if it is discharged. ■ You will need the following items: ● Flathead screwdriver (To prevent damage to the key, coverthe tip of the screwdriver with a ...

384 4-3. Do-it-yourself maintenance ■ If the key battery is discharged The following symptoms may occur. ● The wireless remote control will not function properly. ● The operational range is reduced. ■ Use CR2025 lithium battery ● Batteries can be purchased at your Toyota dealer, jewelers, or cameras...

385 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. Turn the engine switch OFF. Open the fuse box cover. Engine compartment Pus...

391 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Under the driver’s side instrument panel Fuse Ampere Circuit 1 TAIL 10 A Parking lights, tail lights, license plate lights, multiport fuel injection system/sequential multiport fuel injection system, instrument cluster lights 2 PANEL 7....

393 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re 24 FR FOG 15 A Front fog lights 25 AM1 7.5 A Starting system, shift lock control system 26 DEF 30 A Rear window defogger, MIR HTR 27 POWER 30 A Power windows ■ After a fuse is replaced ● If the lights do not turn on even after the fuse ha...

394 4-3. Do-it-yourself maintenance Light bulbs You may replace the following bulbs yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs...

395 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Rear bulb locations Stop/tail and rear side marker lights Rear turn signal lights Back-up lights License plate lights

397 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Unplug the bulb while depress-ing the lock release. ■ Front fog lights (if equipped) Remove the fender liner boltsand clip. Partly remove the fender liner. Turn the bulb base counterclock-wise. STEP 2 STEP 1 STEP 2 STEP 3

398 4-3. Do-it-yourself maintenance Unplug the bulb while depress-ing the lock release. ■ Front turn signal/parking and front side marker lights Turn the bulb base counterclock-wise. Remove the light bulb. STEP 4 STEP 1 STEP 2

399 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Stop/tail and rear side marker lights, rear turn signal lightsand back-up lights Open the back door. Left side Remove the cover. Right side (type A) Remove the cover using the flat-head screwdriver. To protect the cover, place a ragbetw...

401 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ License plate lights Open the back door and removethe cover. To protect the cover, place a ragbetween the flathead screwdriverand the cover, as shown in theillustration. Turn the bulb base counterclock-wise. Remove the light bulb. ■ LED...

402 4-3. Do-it-yourself maintenance ■ Condensation build-up on the inside of the lens Contact your Toyota dealer for more information in the following situations.Temporary condensation build-up on the inside of the headlight lens doesnot indicate a malfunction. ● Large drops of water are built up on...

404 5-1. Essential information Emergency flashers NOTICE ■ To prevent battery discharge Do not leave the emergency flashers on longer than necessary when theengine is not running. Use the emergency flashers if the vehicle malfunctions or is involved in an accident. Press the switch to flash allthe t...

5 Wh en t ro uble ar ises 405 5-1. Essential information If your vehicle needs to be towed Before towing The following may indicate a problem with your transmission. Contactyour Toyota dealer before towing. ● The engine is running, but the vehicle will not move. ● The vehicle makes an abnormal sound...

406 5-1. Essential information Emergency towing If a tow truck is not available, in an emergency your vehicle may betemporarily towed using a cable or chain secured to the emergencytowing eyelet. This should only be attempted on hard surfaced roadsfor short distances at low speeds.A driver must be i...

5 Wh en t ro uble ar ises 407 5-1. Essential information Towing with a sling-type truck Do not tow with a sling-type truckto prevent body damage. Towing with a wheel-lift type truck From the front (2WD models) Release the parking brake. From the front (AWD models) Use a towing dolly under the rearwh...

408 5-1. Essential information From the rear Automatic transmission: Use atowing dolly under the frontwheels. Manual transmission: We recom-mend to use a towing dolly underthe front wheels. When not using a towing dolly,turn the engine switch to the“ACC” position and shift the shiftlever to N. Using...

5 Wh en t ro uble ar ises 409 5-1. Essential information CAUTION ■ Caution while towing ● Use extreme caution when towing the vehicle. Avoid sudden starts or erratic driving maneuvers which place excessivestress on the emergency towing eyelet and the cables or chains. Alwaysbe cautious of the surrou...

410 5-1. Essential information NOTICE ■ To prevent body damage when towing with a sling-type truck Do not tow with a sling-type truck, either from the front or rear. ■ To prevent causing serious damage to the transmission and ActiveTorque Control 4WD system (AWD models) when towing using awheel-lift...

5 Wh en t ro uble ar ises 411 5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. ■ Visible symptoms ● Fluid leaks under the vehicle(Water dripping fr...

412 5-1. Essential information Fuel pump shut off system Follow the procedure below to restart the engine after the system isactivated. Turn the engine switch to the “ACC” or “LOCK” position. Restart the engine. NOTICE ■ Before starting the engine Inspect the ground under the vehicle.If you find tha...

5 Wh en t ro uble ar ises 413 5-2. Steps to take in an emergency If a warning light turns on or a warning buzzer sounds... Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous. The following warning indicates a possible problem in the brake sys-tem. Immediately stop the veh...

414 5-2. Steps to take in an emergency Stop the vehicle immediately. The following warning indicates the possibility of damage to the vehi-cle that may lead to an accident. Immediately stop the vehicle in asafe place and contact your Toyota dealer. Have the vehicle inspected immediately. Failing to ...

5 Wh en t ro uble ar ises 415 5-2. Steps to take in an emergency (U.S.A.) (Canada) ABS warning light Indicates a malfunction in:• ABS; or• The brake assist system. Electric power steering system warning light (warning buzzer) Indicates a malfunction in the EPS system. Slip indicator light Indicates ...

416 5-2. Steps to take in an emergency Follow the correction procedures. After taking the specified steps to correct the suspected problem,check that the warning light turns off. CAUTION ■ When the electric power steering warning light comes on The steering wheel may become extremely heavy.If the st...

5 Wh en t ro uble ar ises 419 5-2. Steps to take in an emergency ■ SRS warning light This warning light system monitors the airbag sensor assembly, front airbagsensors, side and curtain shield airbag sensors, curtain shield airbag sen-sors, driver's seat position sensor, driver's seat belt buckle sw...

420 5-2. Steps to take in an emergency ■ If the tire pressure warning system is inoperative The tire pressure warning system will be disabled in the following condi-tions:(When the condition becomes normal, the system will work properly.) ● If tires not equipped with tire pressure warning valves and...

5 Wh en t ro uble ar ises 421 5-2. Steps to take in an emergency CAUTION ■ If the tire pressure warning light comes on Be sure to observe the following precautions. Failure to do so couldcause loss of vehicle control and result in death or serious injury. ● Stop your vehicle in a safe place as soon ...

5 Wh en t ro uble ar ises 423 5-2. Steps to take in an emergency NOTICE ■ Precaution when installing a different tire When a tire of a different specification or maker is installed, the tire pres-sure warning system may not operate properly.

424 5-2. Steps to take in an emergency If you have a flat tire Remove the flat tire and replace it with the spare provided. ■ Before jacking up the vehicle ● Stop the vehicle on a hard, flat surface. ● Set the parking brake. ● Shift the shift lever to P (automatic transmission) or R (manualtransmiss...

5 Wh en t ro uble ar ises 425 5-2. Steps to take in an emergency Taking out the jack Turn the knobs to the “UNLOCK”position and remove the deckboard. Detach the hook. STEP 1 STEP 2

426 5-2. Steps to take in an emergency Taking out the spare tire Turn the knobs to the “UNLOCK”position and remove the deckboards. Loosen the center fastener thatsecures the spare tire. STEP 1 STEP 2

5 Wh en t ro uble ar ises 427 5-2. Steps to take in an emergency Replacing a flat tire Chock the tires. Vehicles with a steel wheel,remove the wheel ornamentusing the wrench. To protect the wheel ornament,place a rag between the wrenchand the wheel ornament, asshown in the illustration. STEP 1 Flat ...

430 5-2. Steps to take in an emergency Installing the tire Remove any dirt or foreign mat-ter from the wheel contact sur-face. If foreign matter is on the wheelcontact surface, the wheel nutsmay loosen while the vehicle isin motion, and the tire maycome off the vehicle. Install the tire and loosely ...

5 Wh en t ro uble ar ises 431 5-2. Steps to take in an emergency Lower the vehicle. Firmly tighten each nut two orthree times in the order shown inthe illustration. Tightening torque: 76 ft•lbf (103 N•m, 10.5 kgf•m) Stow the flat tire, tire jack and all tools. Stowing the flat tire Vehicles with alu...

5 Wh en t ro uble ar ises 433 5-2. Steps to take in an emergency Pull the ends of the belts tosecure the tire. STEP 6 ■ The compact spare tire ● The compact spare tire is identified by the label “TEMPORARY USEONLY” on the tire sidewall.Use the compact spare tire temporarily only in an emergency. ● M...

434 5-2. Steps to take in an emergency CAUTION ■ Using the tire jack Improper use of the tire jack may lead to death or serious injuries due tothe vehicle suddenly falling off the jack. ● Do not use the tire jack for any purpose other than replacing tires orinstalling and removing tire chains. ● Onl...

5 Wh en t ro uble ar ises 435 5-2. Steps to take in an emergency CAUTION ■ Replacing a flat tire ● Do not attach a heavily damaged wheel ornament, as it may fly off thewheel while the vehicle is moving and possibly result in serious injury. ● Failure to follow these precautions could cause the wheel...

436 5-2. Steps to take in an emergency CAUTION ■ When the spare tire is attached The vehicle speed may not be correctly detected, and the following sys-tems may not operate correctly: ● ABS & Brake assist ● VSC ● TRAC Also, not only can the following system not be utilized fully, it may actu-all...

5 Wh en t ro uble ar ises 437 5-2. Steps to take in an emergency NOTICE ■ When replacing the tires When removing or fitting the wheels, tires or the tire pressure warningvalve and transmitter, contact your Toyota dealer as the tire pressurewarning valve and transmitter may be damaged if not handled ...

438 5-2. Steps to take in an emergency If the engine will not start If the engine still does not start after following the correct starting procedure ( → P. 118) or releasing the steering lock ( → P. 120), confirm the following points. ■ The engine will not start even when the starter motor oper-ate...

5 Wh en t ro uble ar ises 439 5-2. Steps to take in an emergency If the shift lever cannot be shifted from P (automatic transmission) If the shift lever cannot be shifted with your foot on the brake, there may be a problem with the shift lock system (a system to prevent accidental operation of the s...

440 5-2. Steps to take in an emergency If you lose your keys New genuine keys can be made by your Toyota dealer. Bring a mas- ter key and the key number stamped on the key number plate.

5 Wh en t ro uble ar ises 441 5-2. Steps to take in an emergency If the battery is discharged The following procedures may be used to start the engine if the vehi- cle's battery is discharged. You can call your Toyota dealer or qualified repair shop. If you have a set of jumper (or booster) cables a...

5 Wh en t ro uble ar ises 443 5-2. Steps to take in an emergency 2.4 L 4-cylinder (2AZ-FE) engine Connecting the jumper cables Positive (+) battery terminal on your vehicle Positive (+) battery terminal on the second vehicle Negative (-) battery terminal on the second vehicle Connect the jumper cabl...

444 5-2. Steps to take in an emergency ■ Avoiding a discharged battery ● Turn off the headlights and the audio system while the engine is turnedoff. ● Turn off any unnecessary electrical components when the vehicle is run-ning at a low speed for an extended period, such as in heavy traffic, etc. ■ C...

5 Wh en t ro uble ar ises 445 5-2. Steps to take in an emergency CAUTION ■ Battery precautions The battery contains poisonous and corrosive acidic electrolyte, whilerelated parts contain lead and lead compounds. Observe the following pre-cautions when handling the battery. ● When working with the ba...

446 5-2. Steps to take in an emergency If your vehicle overheats If your engine overheats: Stop the vehicle in a safe place and turn off the air condi-tioning system. Check to see if steam is coming out from under the hood. If you see steam: Stop the engine. Carefully lift the hood after the steamsu...

5 Wh en t ro uble ar ises 447 5-2. Steps to take in an emergency ■ Overheating If you observe the following, your vehicle may be overheating. ● The engine coolant temperature gauge enters the red zone or a loss ofpower is experienced. ● Steam is coming from under the hood. CAUTION ■ To prevent an ac...

5 Wh en t ro uble ar ises 449 5-2. Steps to take in an emergency If the vehicle becomes stuck CAUTION ■ When attempting to free a stuck vehicle If you choose to rock the vehicle back and forth to free it, make sure the sur-rounding area is clear, to avoid striking other vehicles, objects or persons....

450 5-2. Steps to take in an emergency NOTICE ■ To avoid damaging the transmission and other components ● Avoid spinning the wheels and do not rev the engine. ● If the vehicle remains stuck after trying these procedures, the vehicle mayrequire towing to be freed.

5 Wh en t ro uble ar ises 451 5-2. Steps to take in an emergency If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the following pro- cedure: Steadily step on the brake pedal with bot...

452 5-2. Steps to take in an emergency CAUTION ■ If the engine has to be turned off while driving ● Power assist for the brakes and steering wheel will be lost, making thebrake pedal harder to depress and the steering wheel heavier to turn.Decelerate as much as possible before turning off the engine...

454 6-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions and weights * 1 : Except S or XRS grade models * 2 : S or XRS grade models * 3 : Unladen vehicle * 4 : Vehicles without double wishbone rear suspension * 5 : Vehicles with double wishbone rear suspension * 6 : 2.4 L 4-cylind...

455 6-1. Specifications 6 Vehicl e sp ecification s Vehicle identification ■ Vehicle identification number The vehicle identification number (VIN) is the legal identifier for yourvehicle. This is the primary identification number for your Toyota. It isused in registering the ownership of your vehicl...

456 6-1. Specifications ■ Engine number The engine number is stamped on the engine block as shown. 1.8 L 4-cylinder (2ZR-FE) engine 2.4 L 4-cylinder (2AZ-FE) engine

457 6-1. Specifications 6 Vehicl e sp ecification s Engine 1.8 L 4-cylinder (2ZR-FE) engine * : Drive belt tension measured with Borroughs drive belt tension gauge No. BT- 33-73F (used belt), lb. Model 2ZR-FE engine Type 4 cylinder in line, 4 cycle, gasoline Bore and stroke 3.17 × 3.48 in. (80.5 × 8...

458 6-1. Specifications 2.4 L 4-cylinder (2AZ-FE) engine Fuel Model 2AZ-FE engine Type 4 cylinder in line, 4 cycle, gasoline Bore and stroke 3.48 × 3.78 in. (88.5 × 96.0 mm) Displacement 144.1 cu.in. (2362 cm 3 ) Drive belt tension Automatic adjustment Valve clearance (engine cold) Intake Exhaust 0....

459 6-1. Specifications 6 Vehicl e sp ecification s Lubrication system ■ Engine oil selection “Toyota Genuine Motor Oil” is used in your Toyota vehicle. UseToyota approved “Toyota Genuine Motor Oil” or equivalent to satisfythe following grade and viscosity. Oil grade: ILSAC multigrade engine oil Rec...

461 6-1. Specifications 6 Vehicl e sp ecification s How to read oil container label: The ILSAC (International Lubricant Standardization and ApprovalCommittee) Certification Mark is added to some oil containers to helpyou select the oil you should use. Cooling system Capacity (Reference) 1.8 L 4-cyli...

462 6-1. Specifications Ignition system Electrical system Spark plug Make Gap 1.8 L 4-cylinder (2ZR-FE) engineDENSO SC20HR112.4 L 4-cylinder (2AZ-FE) engineDENSO SK20R11NGK IFR6A11 0.043 in. (1.1 mm) NOTICE ■ Iridium-tipped spark plugs Use only iridium-tipped spark plugs. Do not adjust spark plug ga...

463 6-1. Specifications 6 Vehicl e sp ecification s Manual transmission Gear oil capacity (Reference) 1.8 L 4-cylinder (2ZR-FE) engine2.0 qt. (1.9 L, 1.7 Imp. qt.)2.4 L 4-cylinder (2AZ-FE) engine2.6 qt. (2.5 L, 2.2 Imp. qt.) Gear oil type Use either of the following: • “TOYOTA Genuine Manual Transmi...

464 6-1. Specifications Automatic transmission Fluid capacity (Reference) 1.8 L 4-cylinder (2ZR-FE) engine6.9 qt. (6.5 L, 5.7 Imp. qt.)2.4 L 4-cylinder (2AZ-FE) engine (2WD models)8.2 qt. (7.8 L, 6.9 Imp. qt.)2.4 L 4-cylinder (2AZ-FE) engine (AWD models)8.6 qt. (8.1 L, 7.1 Imp. qt.) Fluid type Toyot...

465 6-1. Specifications 6 Vehicl e sp ecification s Rear differential (AWD models) Transfer (AWD models) Clutch Oil capacity 0.5 qt. (0.5 L, 0.4 Imp. qt.) Oil type Hypoid gear oil API GL-5 Recommended oil viscosity Above 0 ° F (-18 ° C): SAE 90 Below 0 ° F (-18 ° C): SAE 80W or 80W-90 Oil capacity 0...

466 6-1. Specifications Brakes * 1 : Minimum pedal clearance when depressed with a force of 66 lbf (294 N, 30 kgf) while the engine is running * 2 : 2.4 L 4-cylinder (2AZ-FE) engine with 18-inch tires or AWD models * 3 : Parking brake lever travel when pulled up with a force of 44 lbf (200 N, 20 kgf...

467 6-1. Specifications 6 Vehicl e sp ecification s Steering Tires and wheels 16-inch tires Free play Less than 1.2 in. (30 mm) Tire size P205/55R16 89H, T135/80R16 101M or T135/70R17 102M Tire inflation pressure(Recommended cold tire inflation pressure) 2WD modelsFront: 32 psi (220 kPa, 2.2 kgf/cm ...

470 6-1. Specifications Fuel information ■ Fuel tank opening for unleaded gasoline To help prevent incorrect fueling, your Toyota has a fuel tank opening thatonly accommodates the special nozzle on unleaded fuel pumps. ■ If your engine knocks ● Consult your Toyota dealer. ● You may occasionally noti...

471 6-1. Specifications 6 Vehicl e sp ecification s ■ Toyota recommends the use of cleaner burning gasoline Cleaner burning gasoline, including reformulated gasoline that contains oxy-genates such as ethanol or MTBE (Methyl Tertiary Butyl Ether) is available inmany areas. Toyota recommends the use o...

472 6-1. Specifications NOTICE ■ Notice on fuel quality ● Do not use improper fuels. If improper fuels are used the engine will bedamaged. ● Do not use leaded gasoline.Leaded gasoline can cause damage to your vehicle’s catalytic converterscausing the emission control system to malfunction. ● Do not ...

473 6-1. Specifications 6 Vehicl e sp ecification s Tire information Typical tire symbols Full-size tire Compact spare tire Tire size ( → P. 476) DOT and Tire Identification Number (TIN) ( → P. 475) Uniform tire quality grading For details, see “Uniform Tire Quality Grading” that follows. Location o...

474 6-1. Specifications Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are thestrands which form the plies in a tire. Radial tires or bias-ply tires A radial tire has “RADIAL” on the sidewall. A tire not marked“RADIAL” is a bias-ply tire. TUBELESS or TUBE ...

475 6-1. Specifications 6 Vehicl e sp ecification s Typical DOT and Tire Identification Number (TIN) DOT symbol * Tire Identification Number(TIN) Tire manufacturer's identifica-tion mark Tire size code Manufacturer's optional tiretype code (3 or 4 letters) Manufacturing week Manufacturing year * : T...

476 6-1. Specifications Tire size ■ Typical tire size information The illustration indicates typicaltire size. Tire use(P = Passenger car, T = Temporary use) Section width (millimeters) Aspect ratio(tire height to section width) Tire construction code(R = Radial, D = Diagonal) Wheel diameter (inches...

477 6-1. Specifications 6 Vehicl e sp ecification s Tire section names Bead Sidewall Shoulder Tread Belt Inner liner Reinforcing rubber Carcass Rim lines Bead wires Chafer Uniform Tire Quality Grading This information has been prepared in accordance with regulationsissued by the National Highway Tra...

478 6-1. Specifications ■ Treadwear The treadwear grade is a comparative rating based on the wearrate of the tire when tested under controlled conditions on a speci-fied government test course. For example, a tire graded 150 would wear one and a half (1-1/2)times as well on the government course as ...

479 6-1. Specifications 6 Vehicl e sp ecification s Warning: The temperature grades for this tire are established for atire that is properly inflated and not overloaded.Excessive speed, underinflation, or excessive loading, either sepa-rately or in combination, can cause heat buildup and possible ti...

485 6 Vehicl e sp ecification s 6-2. Customization Customizable features Item Function Default setting Customized setting Wireless remote con-trol (if equipped) ( → P. 28) Wireless remote control On Off Unlocking operation Driver's door unlocked in one step, all doors unlocked in two steps All doors...

487 6 Vehicl e sp ecification s 6-3. Initialization Items to initialize Item When to initialize Reference Maintenance data (U.S.A. only) After the maintenance is performed P. 337 Tire pressure warning system (if equipped) • When rotating the tires on vehicles differing with front and rear tire infla...

491 7 For owners Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions inEnglish. Utilisation correcte des ceinture...

492 Entretien et soin ■ Ceintures de sécurité Nettoyez avec un chiffon ou une éponge humectée d'eausavonneuse tiède. Vérifiez régulièrement que les ceintures ne sontpas effilochées, entaillées ou exagérément usées. ATTENTION ■ Détérioration et usure des ceintures de sécurité Inspectez les ceintures ...

493 7 For owners SRS airbag instructions for Canadian owners (in French) The following is a French explanation of SRS airbag instructions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbaginstructions in English. Sacs de sécurité gonflables ...

494 Composition du système de sacs de sécurité gonflables Capteurs de sacs desécurité gonflables frontaux Système de classificationde l'occupant du siègepassager avant (ECU etcapteurs) Sac de sécurité gonflablepassager avant Sacs de sécurité gonflableslatéraux Prétensionneurs deceintures de sécurité...

496 ATTENTION ■ Précautions avec les sacs de sécurité gonflables SRS Respectez les précautions suivantes concernant les airbags.À défaut, des blessures graves, voire mortelles, pourraient s'ensuivre. ● Le conducteur et tous les passagers à bord du véhicule doivent porter leurceinture de sécurité cor...

500 ATTENTION ■ Précautions avec les sacs de sécurité gonflables SRS ● Si vous avez des difficultés à respirer après le déploiement de l’airbagSRS, ouvrez une porte ou une vitre pour faire entrer de l'air frais, ou biendescendez du véhicule si cela ne présente pas de danger. Essuyez toutrésidu dès q...

516 GAS STATION INFORMATION Hood lock release lever P. 346 Fuel filler door opener P. 64 Tire inflation pressure P. 467 Auxiliary catch lever P. 346 Fuel filler door P. 64 Fuel tank capacity(Reference) 13.2 gal. (50 L, 10.9 Imp. gal.) Fuel type Unleaded gasoline only P. 65, 458 Cold tire inflation p...