Toyota 2011 Rav4- Manuals

21 Symbols used throughout this manual Cautions & Notices Symbols used in illustrations CAUTION This is a warning against anything which may cause death or injury to people if the warning is ignored. You are informed about what you must or must not do in order to reduce the risk of injury to you...

TABLE OF CONTENTS 1 1 Before driving Adjusting and operating features such as door locks, mirrors, and steering column. 2 When driving Driving, stopping and safe-driving information. 3 Interior features Air conditioning and audio systems, as well as other interior features for a comfortable driving ...

6 Headlights (low beam) P. 165 Pictorial index Exterior Front fog lights ∗ P. 168 Hood P. 354 Outside rear view mirrors P. 79 Front turn signal/parking and front side marker lights P. 153, 165 Headlights (high beam) and daytime running lights P. 166 Moon roof ∗ P. 84 Windshield wipers P. 169 Turn si...

8 Glove box P. 312 Front seats P. 49 SRS side airbags P. 98 Power window switches P. 81 SRS front passenger airbag P. 98 SRS driver airbag P. 98 Console box P. 313 Interior Pictorial index Floor mat P. 331 Head restraints P. 65 Bottle holders P. 316 Seat belts P. 68 Rear seats P. 54 Cup holders P. 3...

12 Tilt and telescopic steering lock release lever P. 76 Headlight switch Turn signal lever Fog light switch ∗ P. 165 P. 153 P. 168 Windshield wiper and washer switch Rear window wiper and washer switch P. 169 P. 171 Fuel filler door opener P. 88 Emergency flasher switch P. 414 Four-wheel drive lock...

14 B Cruise control switch P. 172 “DISP” switch P. 163 Audio remote control switches ∗ ,* P. 270 Without hands-free phone system Engine (ignition) switch (without smart key system) P. 147 Instrument panel Pictorial index With hands-free phone system Cruise control switch P. 172 “DISP” switch P. 163 ...

17 Luggage compartment Pictorial index Luggage cover ∗ P. 334 Second seatback release lever ∗ P. 57 Grocery bag hooks P. 332 Storage boxes ∗ P. 332 Cargo hooks P. 332 ∗ : If equipped Power outlet P. 322

2011 RAV4 ! A word about safe vehicle operations This Q ui c k R ef erenc e G ui d e is a summary of basic vehicle operations. It contains brief descriptions of fundamentaloperations so you can locate and use the vehicle’s mainequipment quickly and easily. The Q ui c k R ef erenc e G ui d e is not i...

1 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Engine maintenance 9 Fuel tank door release and cap 8 Hood release 8 Indicator symbols 4-5 Instrument cluster 4 Instrument panel 2-3 Keyless entry* 6 Smart Key system* 7 Active torque control 4WD (4WD models) 11 Air Conditioning/Heatin...

2 OVERVIEW Instrument panel Steering wheel controls Steering wheel audio controls 1 Telephone controls 1 Trip information display switchSpeech command button 1 Cruise controlHeadlight, turn signal and fog light 1 control Wiper and washer controlsFour-wheel drive lock switch (4WD models)Audio system/...

4 OVERVIEW Open door warning TachometerService indicator and reminderSpeedometerEngine coolant temperatureFuel gaugeOdometer, two trip meters and trip information displayAutomatic Transmission shift position indicatorOdometer/trip meter switch and trip meter reset button Instrument cluster Charging ...

6 OVERVIEW Keyless entry Locking operation Unlocking operation Beep sound can be switched ON or OFF. Refer to the Owner’s Manual for more details. Panic button Push and hold NOTE: If a door is not opened within 60 seconds of unlocking, all doors will relock for safety. Push ONCE: Driver door TWICE: ...

7 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Smart Key system (if equipped) Start function NOTE: Gear shift lever must be in Park and brake pedal depressed. Push Depress brake pedal Carrying Green indicator ON Without depressing the brake pedal, pressing the “ENGINE START STOP”sw...

8 OVERVIEW NOTE: Tighten until one click is heard. If the cap is not tightened enough, Check Engine “ ” indicator may illuminate. Fuel tank door release and cap Pull up Turn to open Store Driver seat Hood release Pull Pull up latchand raise hood Engage support rod

9 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Engine coolant reservoirEngine oil filler capEngine oil level dipstickWindshield and back window washer fluid tank NOTE: Regularly scheduled maintenance, including oil changes, will help extend the life of your vehicle and maintain per...

10 Automatic Transmission * The ignition/“ENGINE START STOP” switch must be “ON” and the brake pedal depressed to shift from Park. Downshifting increases power going uphill, or provides engine brakingdownhill. For best fuel economy during normal driving conditions, alwaysdrive with the shift lever i...

11 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Auto lock functions Four-wheel drive lock switch Push the switch to ensure that the engine torque is applied to the fourwheels. NOTE: Should ONLY be used when wheel spinning occurs on loose or unpaved surfaces. Refer to the Owner’s Ma...

12 FEATURES/OPERATIONS Seat adjustments-Second row seats Seat position (forward/backward)Seatback angleSeatback lock release Vehicles with third row seats Vehicles without third row seats Seat position (forward/backward)Height crank (driver side only) Seatback angleSeat position, cushion angle and h...

13 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES (2) Lower (3) Pull down From inside From outside (vehicles without third row seats) (1) Push (2) Lower (1) Push (5) Pull up (7) Push down (8) Push to lock in (4) Fold down (3) Pull (9) Push to lock in (6) Lift up Seats-Stowing third r...

14 FEATURES/OPERATIONS Lights & turn signals Turn signals Headlights High beam flasher Low beam Fog lights (if equipped) Headlights -Daytime Running Light system (DRL) (if equipped) Automatically turns on the headlights at a reduced intensity. -Automatic light cut off system Will automatically t...

15 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Windows-Power Driver side Automatic operation (driver side only) Push the switch completely down or pull it completely up and release to fully open or close. To stop windowmidway, lightly push the switch in the opposite direction. Win...

16 Moonroof (if equipped) Tilting operation Sliding operation NOTE: If battery is disconnected, the moonroof needs to be reinitialized. Refer to the Owner’s Manual for more details. Open Close Close Tilt Recommended openposition to minimizewind noise Door locks Unlock Lock FEATURES/OPERATIONS The VS...

17 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Telephone controls (Bluetooth ® ) (if equipped) Bluetooth ® technology allows dialing or receipt of calls without taking hands from the steering wheel or using a cable to connect the compatibletelephone and the system. Refer to “Using...

18 FEATURES/OPERATIONS Seat heaters (if equipped) Left front seat Right front seat Air Conditioning/Heating Temperature selector (driver side)Recirculate cabin air (fresh air when OFF)Airflow ventIn “ ” mode, use fresh air (“ ” indicator OFF) to reduce window fogging. “ ” mode uses fresh air only. A...

19 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Clock Manual Air Conditioning system H- Hour set M- Minute set :00- Round off minutes AutomaticAir Conditioning system Manual Air Conditioning Airflow vent“ ” or “ ” mode uses fresh air only (“ ” indicator “OFF”) to reduce window fogg...

20 CD player To scan tracks on a disc Push “SCAN.” Push again to hold selection. CD Changer (Type 2)-To load one disc Push “LOAD” and insert one disc. -To load multiple discs Push and hold “LOAD” until you hear a beep. Insert one disc. Wait until the green indicator illuminates and shutter opens to ...

21 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES “MODE” Push to turn audio ON and select an audio mode. Push and hold to turnthe audio OFF. “ ” Use to search within the selected audio medium (radio, CD, iPod ® , etc.). By inserting a mini plug into the AUX port, you can listen to mu...

22 Rear console NOTE: Ignition switch/“ENGINE START STOP” switch must be in the “ON” position to be used. Power outlets-12V DC Instrument panel Inside center console NOTE: Designed for car accessories. Ignition switch/“ENGINE START STOP” switch must be in the “ACC” or “ON” position to be used. FEATU...

23 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Cruise control Turning system ON/OFF Functions System ON/OFF Resume 2 /Increase speed Set/Decrease speed Cancel 1 1 The set speed may also be cancelled by depressing the brake pedal. 2 The set speed may be resumed once vehicle speed e...

24 SAFETY AND EMERGENCY FEATURES Moving the lever to “LOCK” will allow the door to be opened only fromthe outside. Doors-Child safety locks If belt is fully extended, then retracted even slightly, it cannot be re-extended beyond that point, unless fully retracted again. This featureis used to help h...

TABLE OF CONTENTS Index 2 1-1. Key information Keys ..................................... 24 1-2. Opening, closing and locking the doors Smart key system ................. 26 Wireless remote control ....... 38 Side doors ............................ 42 Back door ............................. 46 1-3....

1 2 3 4 5 6 7 3 2-3. Operating the lights and wipers Headlight switch .................. 165 Fog light switch ................... 168 Windshield wipers and washer .............................. 169 Rear window wiper and washer .............................. 171 2-4. Using other driving systems Cruis...

TABLE OF CONTENTS Index 4 Security and system setup ................................ 296 Using the phone book ........ 299 3-4. Using the interior lights Interior lights list ................. 307• Personal/interior light main switch ...................... 308 • Personal/interior lights...... 308• I...

1 2 3 4 5 6 7 5 If your vehicle needs to be towed ................................ 415 If you think something is wrong ................................ 422 Fuel pump shut off system .............................. 423 Event data recorder ............ 424 5-2. Steps to take in an emergency If a warnin...

24 1-1. Key information Keys Using the mechanical key (vehicles with smart key system) Take out the mechanical key. After using the mechanical key, store it in the electronic key. Carry the mechanical key together with the electronic key. If the electronic key battery is depleted or the entry functi...

25 1-1. Key information 1 Before driving ■ When required to leave a key to the vehicle with a parking attendant Lock the glove box as circumstances demand. ( → P. 312) Vehicles without smart key system: Carry the master key for your own use and leave the valet key only with the attendant. Vehicles w...

26 1-2. Opening, closing and locking the doors Smart key system ∗ The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. (The driver should always carry the electronic key.) Locks and unlocks the doors ( → P. 27) Locks and unlocks ...

28 1-2. Opening, closing and locking the doors Antenna location and effective range ■ Antenna location Antennas outside the cabin Antennas inside the cabin Antenna outside the luggage compartment

31 1-2. Opening, closing and locking the doors 1 Before driving The setting changes each time an operation is performed, as shown below. (When changing the setting continuously, release the buttons, wait for at least 5 seconds, and repeat step 2.) ■ Battery-saving function In the following circumsta...

33 1-2. Opening, closing and locking the doors 1 Before driving ● The doors may unlock if a large amount of water splashes on the door handle, such as in the rain or in a car wash. (The doors will automatically be locked after approximately 60 seconds if the doors are not opened and closed.) ● Gripp...

35 1-2. Opening, closing and locking the doors 1 Before driving ■ If the smart key system does not operate properly ● Locking and unlocking the doors: Use the mechanical key. ( → P. 461) ● Starting the engine. ( → P. 461) ■ When the electronic key battery is fully depleted → P. 388 Alarm Situation C...

36 1-2. Opening, closing and locking the doors ■ Customization that can be configured at Toyota dealer It is possible to deactivate the smart key system etc. (Customizable features → P. 500) ■ Certification for the smart key system For vehicles sold in the U.S.A. FCC ID: HYQ14AEM FCC ID: NI4TMLF-2 F...

37 1-2. Opening, closing and locking the doors 1 Before driving CAUTION ■ Caution regarding interference with electronic devices ● People with implanted pacemakers or cardiac defibrillators should keep away from smart key system antennas. ( → P. 28) The radio waves may affect the operation of such d...

38 1-2. Opening, closing and locking the doors Wireless remote control ■ Operation signals Doors: A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice) The wireless remote control can be used to lock and unlock the vehi...

39 1-2. Opening, closing and locking the doors 1 Before driving ■ Panic mode Vehicles without smart key system Vehicles with smart key system ■ Door lock buzzer If a door is not fully closed, a buzzer sounds continuously if an attempt to lock the door is made. Fully close the door to stop the buzzer...

42 1-2. Opening, closing and locking the doors Side doors The vehicle can be locked and unlocked using the entry function, wireless remote control, key or door lock switch. ■ Entry function (vehicles with smart key system) → P. 26 ■ Wireless remote control → P. 38 ■ Key Vehicles without smart key sy...

43 1-2. Opening, closing and locking the doors 1 Before driving ■ Door lock switch Locks all doors Unlocks all doors ■ Inside lock button Locks the door Unlocks the door Pulling the door handle can open the front door even if the lock button is in the lock posi-tion.

44 1-2. Opening, closing and locking the doors Locking the front doors from the outside without the wireless remote control or key Move the inside door lock button to the lock position. Close the door. Rear door child-protector locks The door cannot be opened from inside the vehicle when the child-p...

45 1-2. Opening, closing and locking the doors 1 Before driving ■ When all the doors are locked with the entry function (vehicles with smart key system), wireless remote control or key The doors cannot be unlocked with the door lock switch. The door lock switch can be reset by unlocking all the door...

46 1-2. Opening, closing and locking the doors Back door ■ Customization that can be configured at Toyota dealer Settings (e.g. wireless remote control) can be changed. (Customizable features → P. 500) CAUTION ■ Caution while driving ● Keep the back door closed while driving. If the back door is lef...

47 1-2. Opening, closing and locking the doors 1 Before driving CAUTION ■ Caution while parking If the open back door hides the stop, tail or rear turn signal lights, other road users must be warned of the presence of your vehicle by a warning triangle or other device. ■ When children are in the veh...

51 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving Flattening front seatbacks The front seats can be moved into a flat seat arrangement. Manual seat Slide the second seats as far back as possible. ( → P. 54) Remove the front head restraint. ( → P. 65) Slide the front sea...

52 1-3. Adjustable components (seats, mirrors, steering wheel) Power seat Slide the second seats as far back as possible. ( → P. 54) Remove the front head restraint. ( → P. 65) Push the seat position adjusting switch forward to slide the seat to the front-most position. Move the seatback angle adjus...

53 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving ■ Active head restraints Even small forces applied to the seatback may cause the head restraint to move. Pushing up a locked head restraint forcibly may appear the head restraint inner structure. These do not indicate pr...

54 1-3. Adjustable components (seats, mirrors, steering wheel) Rear seats ■ Second seats Vehicles with third seat Seat position adjustment levers Seatback angle adjustment levers When a person sits in the sec-ond center position, align all seatbacks at the same angle.

55 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving Vehicles without third seat Seat position adjustment levers Seatback angle adjustment levers When a person sits in the sec-ond center position, align all seatbacks at the same angle.

57 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving Folding second seats Folding down the second seats will enlarge the luggage compart-ment. ■ Before folding the second seats Stow the second center seat belt. ( → P. 70) Make sure the outside seat belt passes through the ...

58 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Folding second seats Slide the second seats as far back as possible. ( → P. 54) From inside Pull down the seatback angle adjustment lever and fold down the seatback. From outside (vehicles without third seats) Open the back door and pu...

59 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving Stowing third seats (vehicles with third seats) ■ Before stowing the third seats Stow the third seat belt buckles. Pass the seat belts through the seat belt hangers. This prevents the shoulder belt from being damaged. Lo...

60 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Stowing third seats Pull and hold the seat lock release strap and lift up the seat rearward and then push the seat down. Push the seat on the front side against the floor and push the seat on rear side against the floor. Make sure it i...

61 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving ■ Returning third seats Pull the seat lock release strap, lift the seat up and move the seat forward. Lock the seat into place. Make sure it is locked securely. Pull the seatback lock release strap and raise the seatback...

63 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving CAUTION ■ When folding second seats ● Do not fold the second seatback when passengers sit or luggage is placed on the seat. ● Do not allow passengers to ride on the folded seat or in the luggage com-partment while drivin...

64 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ After adjusting a seat ● After adjusting the seat position, try sliding it forward and backward to make sure it is locked in position. ● After adjusting the seatback, push your body adjust the seatback to make sure it is locked...

65 1 1-3. Adjustable components (seats, mirrors, steering wheel) Before driving Head restraints Head restraints are provided for all seats. Front seats Up Pull the head restraints up. Down Push the head restraint down while pushing the lock release button. Second seats Third seats (if equipped) Lock...

66 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Removing the head restraints Except second center seat Second center seat ■ Installing the head restraints Except second center seat Pull the head restraint up while pushing the lock release button. Align the head restraint with the in...

67 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving Second center seat ■ Adjusting the height of the head restraints ■ Adjusting the rear seat head restraints Always raise the head restraint one level from the stowed position when using. CAUTION ■ Head restraint precautio...

68 1-3. Adjustable components (seats, mirrors, steering wheel) Seat belts Make sure that all occupants are wearing their seat belts before driv- ing the vehicle. ■ Correct use of the seat belts ● Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with t...

69 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving Second center seat belt The second center seat belt is a 3-point type restraint with 2 buckles. Both seat belt buckles must be correctly located and securely latched for proper operation. Make sure that the buckle is sec...

70 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Releasing method The second center seat belt can be completely released only when necessary such as when folding down the second seats. Insert the key into the hole on the center seat belt buckle to release the tab (with hook end), and...

71 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving ■ Emergency locking retractor (ELR) The retractor will lock the belt during a sudden stop or on impact. It may also lock if you lean forward too quickly. A slow, easy motion will allow the belt to extend so that you can ...

72 1-3. Adjustable components (seats, mirrors, steering wheel) ■ When not using the rear seat belts Second seats Third seats ■ Child seat belt usage The seat belts of your vehicle were principally designed for persons of adult size. ● Use a child restraint system appropriate for the child, until the...

73 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving ■ Seat belt extender CAUTION Observe the following precautions to reduce the risk of injury in the event of sudden braking, sudden swerving or an accident. Failing to do so may cause death or severe injury. ■ Wearing a s...

74 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ Seat belt pretensioners ● Do not place anything, such as a cushion, on the front passenger's seat. Doing so will disperse the passenger's weight, which prevents the sensor from detecting the passenger's weight properly. As a re...

75 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving CAUTION ■ When using the second center seat belt ■ Using a seat belt extender ● Do not wear the seat belt extender if you can fasten the seat belt without the extender. ● Do not use the seat belt extender when installing...

76 1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel CAUTION ■ Caution while driving Do not adjust the steering wheel while driving. Doing so may cause the driver to mishandle the vehicle and an accident, resulting in death or serious injury. ■ After adjusting the steering w...

77 1 1-3. Adjustable components (seats, mirrors, steering wheel) Before driving Anti-glare inside rear view mirror Glare from the headlights of vehicles behind can be reduced by using the following functions. Manual anti-glare inside rear view mirror Normal position Anti-glare position Auto anti-gla...

78 1-3. Adjustable components (seats, mirrors, steering wheel) Adjusting the height of rear view mirror Adjust the height of the rear view mirror by moving it up and down. ■ To prevent sensor error (vehicles with auto anti-glare inside rear view mirror) CAUTION ■ Caution while driving Do not adjust ...

79 1 1-3. Adjustable components (seats, mirrors, steering wheel) Before driving Outside rear view mirrors Vehicles without smart key system Mirror angle can be adjusted using the switch when the engine switch is in the “ACC” or “ON” position. Vehicles with smart key system Mirror angle can be adjust...

80 1-3. Adjustable components (seats, mirrors, steering wheel) Folding back the mirrors Push backward to fold the mir-rors. ■ When the mirrors are fogged up (vehicles with outside rear view mirror defoggers) Turn on the mirror defoggers to defog the mirrors. ( → P. 240) CAUTION ■ When driving the ve...

81 1 Before driving 1-4. Opening and closing the windows and moon roof Power windows Lock switch Press the switch down to lock the passenger window switches. Use this switch to prevent chil-dren from accidentally opening or closing a passenger window. The power windows can be opened and closed using...

82 1-4. Opening and closing the windows and moon roof ■ The power windows can be operated when Vehicles without smart key system The engine switch is in the “ON” position. Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. ■ Operating the power windows after turnin...

83 1-4. Opening and closing the windows and moon roof 1 Before driving CAUTION ■ Closing the windows Observe the following precautions. Failing to do so may result in death or serious injury. ● Check to make sure that all passengers do not have any part of their body in a position where it could be ...

84 1-4. Opening and closing the windows and moon roof Moon roof ∗ ■ The moon roof can be operated when Vehicles without smart key system The engine switch is in the “ON” position. Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. Use the overhead switches to open,...

86 1-4. Opening and closing the windows and moon roof ■ When the moon roof does not close normally Perform the following procedure: ● If the moon roof closes but then re-opens slightly Stop the vehicle. Press and hold the “TILT UP” switch.* 1 The moon roof will close, reopen and pause for approximat...

87 1-4. Opening and closing the windows and moon roof 1 Before driving CAUTION ■ Opening the moon roof Observe the following precautions. Failing to do so may cause death or serious injury. ● Do not allow any passengers to put their hands or heads outside the vehi-cle while it is moving. ● Do not si...

88 1-5. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap. ■ Before refueling the vehicle Vehicles without smart key system Turn the engine switch to the “LOCK” position and ensure that all the doors and windows are closed. Vehicles with smart key system Turn ...

89 1-5. Refueling 1 Before driving Closing the fuel tank cap When replacing the fuel tank cap, turn it until a clicking sound is heard. After releasing your hand, the cap will turn slightly to the opposite direction. Hang the fuel tank cap on the back of the fuel filler door. STEP 3 ■ Fuel types Use...

90 1-5. Refueling CAUTION ■ Refueling the vehicle Observe the following precautions while refueling the vehicle. Failure to do so may result in death or serious injury. ● Touch the vehicle or some other metal surface to discharge any static electricity. Sparks resulting from discharging static elect...

91 1-5. Refueling 1 Before driving NOTICE ■ Refueling Do not spill fuel during refueling. Doing so may damage the vehicle, such as causing the exhaust systems to operate abnormally or damaging fuel system components or the vehicle's painted surface.

92 1-6. Theft deterrent system Engine immobilizer system The vehicle's keys have built-in transponder chips that prevent the engine from starting if the key has not been previously registered in the vehicle's on-board computer. Never leave the keys inside the vehicle when you leave the vehicle. Vehi...

93 1-6. Theft deterrent system 1 Before driving ■ System maintenance The vehicle has a maintenance-free type engine immobilizer system. ■ Conditions that may cause the system to malfunction ● If the key is in contact with a metallic object ● If the key is in close proximity to or touching a key to t...

94 1-6. Theft deterrent system NOTICE ■ To ensure the system operates correctly Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guaranteed.

96 1-7. Safety information Correct driving posture Drive in a good posture as follows: Sit upright and well back in the seat. ( → P. 49) Adjust the position of the seat forward or backward to ensure the pedals can be reached and easily depressed to the extent required. ( → P. 49) Adjust the seatback...

97 1-7. Safety information 1 Before driving CAUTION ■ While driving ● Do not adjust the position of the driver's seat while driving. Doing so could cause the driver to lose control of the vehicle. ● Do not place a cushion between the driver or passenger and the seatback. A cushion may prevent correc...

98 1-7. Safety information SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. Front airbags Driver airbag/f...

99 1-7. Safety information 1 Before driving Airbag system components Your vehicle is equipped with ADVANCED AIRBAGS designed based on US motor vehicle safety standards (FMVSS208). The airbag sys-tem controls airbag deployment power for the driver and front pas-senger. The driver airbag system consis...

100 1-7. Safety information The main SRS airbag system components are shown above. The SRS airbag system is controlled by the airbag sensor assembly. The airbag sensor assembly consists of a safing sensor and an airbag sensor. In certain types of severe frontal or side impacts, the SRS airbag sys-te...

101 1-7. Safety information 1 Before driving ■ SRS airbag deployment conditions Front airbags ● The SRS front airbags will deploy in the event of an impact that exceeds the set threshold level (the level of force corresponding to an approxi-mately 12 - 18 mph [20 - 30 km/h] frontal collision with a ...

102 1-7. Safety information ■ Conditions under which the SRS airbags may deploy (inflate), other than a collision The SRS front airbags may also deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration. The SRS curtain shield airbags may also de...

104 1-7. Safety information ■ When to contact your Toyota dealer In the following cases, contact your Toyota dealer as soon as possible. ● Any of the SRS airbags have been inflated. ● The front of the vehicle is damaged or deformed, or was involved in an acci-dent that was not severe enough to cause...

105 1-7. Safety information 1 Before driving CAUTION ■ SRS airbag precautions Observe the following precautions regarding the airbags. Failure to do so may cause death or serious injury. ● The driver and all passengers in the vehicle must wear their seat belts properly. The SRS airbags are supplemen...

108 1-7. Safety information CAUTION ■ SRS airbag precautions ● Do not use seat accessories which cover the parts where the SRS side airbags inflate as they may interfere with inflation of the airbags. ● Do not strike or apply significant levels of force to the area of the SRS air-bag components ( → ...

109 1-7. Safety information 1 Before driving CAUTION ■ SRS airbag precautions ● Do not touch any of the component parts immediately after the SRS air-bags have deployed (inflated) as they may be hot. ● If breathing becomes difficult after the SRS airbag has deployed, open a door or window to allow f...

110 1-7. Safety information Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classifica- tion system. This system detects the conditions of the front passen- ger seat and activates or deactivates the devices for front passenger. SRS warning ligh...

111 1-7. Safety information 1 Before driving Conditions and operation of the front passenger occupant classification system ■ Adult* 1 ■ Child* 3 or child restraint system* 4 Indicator/ warning light “AIR BAG ON” and “AIR BAG OFF” indicator lights “AIR BAG ON” SRS warning light Off Front passenger's...

112 1-7. Safety information ■ Unoccupied ■ There is a malfunction in the system * 1 : The system judges a person of adult size as an adult. When a smaller adult sits in the front passenger seat, the system may rec-ognize him/her as a child depending on his/her physique and pos-ture. * 2 : In the eve...

113 1-7. Safety information 1 Before driving * 4 : Never install a rear-facing child restraint system on the front pas- senger seat. A forward-facing child restraint system should only be installed on the front passenger seat when it is unavoidable. ( → P. 117) * 5 : In case the indicator is not ill...

114 1-7. Safety information CAUTION ■ Front passenger occupant classification system precautions Observe the following precautions regarding front passenger occupant clas-sification system. Failure to do so may cause death or serious injury. ● Wear the seat belt properly. ● Make sure the front passe...

115 1-7. Safety information 1 Before driving CAUTION ■ Front passenger occupant classification system precautions ● If an adult sits in the front passenger seat, the “AIR BAG ON” indicator light is illuminated. If the “AIR BAG OFF” indicator is illuminated, ask the passenger to sit up straight, well...

116 1-7. Safety information Child restraint systems Points to remember Studies have shown that installing a child restraint on a rear seat is much safer than installing one to the front passenger seat. ● Choose a child restraint system that suits your vehicle and is appropriate to the age and size o...

117 1-7. Safety information 1 Before driving Types of child restraint Child restraint systems are classified into the following 3 types according to the age and size of the child. Rear facing ⎯ Infant seat/convertible seat Forward facing ⎯ Convertible seat Booster seat

118 1-7. Safety information ■ Selecting an appropriate child restraint system ● Use a child restraint system appropriate for the child until the child becomes large enough to properly wear the vehicle’s seat belt. ● If a child is too large for a child restraint system, sit the child on a rear seat a...

120 1-7. Safety information Installing child restraints Follow the child restraint system manufacturer's instructions. Firmly secure child restraints to the outside rear seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt...

122 1-7. Safety information Installation with LATCH system (second outside seats only) Fold the seatback while pulling the lever. Return the seatback and secure it at the 1st lock posi-tion (most upright position). Adjust the seatback to the 7th lock position. ( → P. 54) 1st lock position 7th lock p...

123 1-7. Safety information 1 Before driving Type B Latch the buckles onto the LATCH anchors. The bars are installed in the clearance between the seat cush-ion and seatback. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. For ow...

125 1-7. Safety information 1 Before driving While pushing the child seat down into the rear seat, allow the shoulder belt to retract until the child seat is securely in place. After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check that it cannot...

126 1-7. Safety information While pushing the child seat into the rear seat, allow the shoulder belt to retract until the child seat is securely in place. After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended. If the c...

127 1-7. Safety information 1 Before driving Removing a child restraint installed with a seat belt Push the buckle release button and fully retract the seat belt. Second center seat: Release the center seat belt as shown in the illustration after removing the child restraint. Child restraint systems...

128 1-7. Safety information Slide the seats forward slightly if it is in the rear-most position. Secure the child restraint using the seat belt. Latch the hook onto the anchor bracket and tighten the top tether strap. Make sure the top tether strap is securely latched. Replace the head restraint. Mo...

129 1-7. Safety information 1 Before driving ■ Center seat Open the anchor bracket cover. Secure the child restraint using the seat belt. Latch the hook onto the anchor bracket and tighten the top tether strap. Make sure the top tether strap is securely latched. ■ Laws and regulations pertaining to ...

130 1-7. Safety information CAUTION ■ When installing a booster seat Do not fully extend the shoulder belt to prevent the belt from going to ALR lock mode. ( → P. 71) ALR mode causes the belt to tighten only which could cause injury or dis-comfort to the child. ■ When installing a child restraint sy...

131 1-7. Safety information 1 Before driving CAUTION ■ When installing a child restraint system ● When installing a child restraint system in the rear center seat, adjust both seat cushions to the same position and align seatbacks at the same angle. Otherwise, the child restraint system cannot be se...

134 2-1. Driving procedures Driving the vehicle The following procedures should be observed to ensure safe driv- ing. ■ Starting the engine → P. 143, 147 ■ Driving With the brake pedal depressed, shift the shift lever to D. ( → P. 150) Release the parking brake. ( → P. 154) Gradually release the bra...

135 2-1. Driving procedures 2 Wh en drivin g Starting on a steep uphill Firmly set the parking brake and shift the shift lever to D. Gently depress the accelerator pedal. Release the parking brake. ■ Driving in the rain ● Drive carefully when it is raining, because visibility will be reduced, the wi...

136 2-1. Driving procedures ■ Operating your vehicle in a foreign country Comply with the relevant vehicle registration laws and confirm the availability of the correct fuel. ( → P. 478) CAUTION ■ When starting the vehicle Always keep your foot on the brake pedal while stopped with the engine run-ni...

137 2-1. Driving procedures 2 Wh en drivin g CAUTION ● Do not under any circumstances shift the shift lever to P, R or N while the vehicle is moving. Doing so can cause significant damage to the transmission system and may result in a loss of vehicle control. ● Do not shift the shift lever to N whil...

138 2-1. Driving procedures CAUTION ■ When driving on slippery road surfaces ● Sudden braking, acceleration and steering may cause tire slippage and reduce your ability to control the vehicle, resulting in an accident. ● Sudden changes in engine speed, such as engine braking caused by up-shifting or...

139 2-1. Driving procedures 2 Wh en drivin g CAUTION ■ When the vehicle is parked ● Do not leave glasses, cigarette lighters, spray cans, or soft drink cans in the vehicle when it is in the sun. Doing so may result in the following. • Gas may leak from a cigarette lighter or spray can, and may lead ...

140 2-1. Driving procedures CAUTION ■ When taking a nap in the vehicle Always turn the engine off. Otherwise, you may accidentally move the shift lever or depress the accelerator pedal, which could cause an accident or fire due to engine overheating. Additionally, if the vehicle is parked in a poorl...

141 2-1. Driving procedures 2 Wh en drivin g NOTICE ■ When driving the vehicle ● Do not depress the accelerator and brake pedals at the same time during driving. If the brake pedal is depressed while driving with the accelerator pedal depressed, driving torque may be restrained. ● Do not use the acc...

142 2-1. Driving procedures NOTICE ■ When encountering flooded roads Do not drive on a road that has flooded after heavy rain etc. Doing so may cause the following serious damage to the vehicle. ● Engine stalling ● Short in electrical components ● Engine damage caused by water immersion In the event...

143 2-1. Driving procedures 2 Wh en drivin g Engine (ignition) switch (vehicles with smart key system) Performing the following operations when carrying the electronic key on your person starts the engine or changes “ENGINE START STOP” switch modes. ■ Starting the engine The engine can be started in...

144 2-1. Driving procedures ■ Changing “ENGINE START STOP” switch mode Modes can be changed by pressing the “ENGINE START STOP” switch with the brake pedal released. (The mode changes each time the switch is pressed.) OFF* The emergency flashers can be used. ACCESSORY mode Some electrical components...

146 2-1. Driving procedures CAUTION ■ When starting the engine Always start the engine while sitting in the driver's seat. Do not depress the accelerator pedal while starting the engine under any circumstances. Doing so may cause an accident resulting in death or serious injury. ■ Stopping the engin...

147 2-1. Driving procedures 2 Wh en drivin g Engine (ignition) switch (vehicles without smart key system) ■ Starting the engine Check that the parking brake is set. Check that the shift lever is set in P. Sit in the driver’s seat and firmly depress the brake pedal. Turn the engine switch to the “STA...

148 2-1. Driving procedures ■ Turning the key from “ACC” to “LOCK” ■ Steering lock release ■ If the engine does not start The engine immobilizer system may not have been deactivated. ( → P. 92) ■ Key reminder function A buzzer sounds if the driver’s door is opened, while the engine switch is in the ...

150 2-1. Driving procedures Automatic transmission Select a shift position appropriate for the driving conditions. ■ Shifting the shift lever 4-speed models 5-speed models

151 2-1. Driving procedures 2 Wh en drivin g Vehicles without smart key system: While the engine switch is in the “ON” position, depress the brake pedal and move the shift lever. Vehicles with smart key system: While the “ENGINE START STOP” switch is in IGNITION ON mode, depress the brake pedal and ...

153 2-1. Driving procedures 2 Wh en drivin g Turn signal lever ■ Turn signals can be operated when Vehicles without smart key system The engine switch is in the “ON” position. Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. ■ If the indicators flash faster than ...

154 2-1. Driving procedures Parking brake ■ Usage in winter time See “Winter driving tips” for parking brake usage in winter time. ( → P. 210) NOTICE ■ Before driving Fully release the parking brake. Driving the vehicle with the parking brake set will lead to brake components overheating, which may ...

155 2-1. Driving procedures 2 Wh en drivin g Horn ■ After adjusting the steering wheel Make sure that the steering wheel is securely locked. The horn may not sound if the steering wheel is not securely locked. ( → P. 76) To sound the horn, press on or close to the mark.

156 2-2. Instrument cluster Gauges and meters Vehicles without smart key system The following gauges, meters and displays illuminate when the engine switch is in the “ON” position. Vehicles with smart key system The following gauges, meters and displays illuminate when the “ENGINE START STOP” switch...

157 2-2. Instrument cluster 2 Wh en drivin g Instrument panel light control The brightness of the instrument panel lights can be adjusted. Brighter Darker When the headlight switch is turned on, the brightness will be reduced slightly unless the control dial is turned fully up. Trip information disp...

158 2-2. Instrument cluster NOTICE ■ To prevent damage to the engine and its components ● Do not let the indicator needle of the tachometer enter the red zone, which indicates the maximum engine speed. ● The engine may be overheating if the temperature gauge is in the red zone (H). In this case, imm...

159 2-2. Instrument cluster 2 Wh en drivin g Indicators and warning lights The indicator and warning lights on the instrument cluster and cen- ter panel inform the driver of the status of the vehicle’s various sys- tems. ■ Instrument cluster ■ Center panel

160 2-2. Instrument cluster ■ Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. * 1 : These lights turn on when the “ENGINE START STOP” switch is turned to IGNITION ON mode (vehicles with smart key system) or the engine switch is turned to the “ON” ...

161 2-2. Instrument cluster 2 Wh en drivin g CAUTION ■ If a safety system warning light does not come on Should a safety system light such as the ABS and SRS airbag warning light not come on when you start the engine, this could mean that these systems are not available to help protect you in an acc...

162 2-2. Instrument cluster Trip information display The trip information display presents the driver with a variety of driv- ing-related data, including the current outside temperature. Trip information ( → P. 163) Displays outside temperature and fuel consumption.

163 2-2. Instrument cluster 2 Wh en drivin g Trip information Type A Push the “DISP” button to dis-play trip information. Display items can be switched by pressing the “DISP” button. Type B Push the “DISP” button to dis-play trip information. Display items can be switched by pressing the “DISP” butt...

165 2 Wh en drivin g 2-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. The daytime running lights turn on. The side marker, park-ing, tail, license plate, daytime running lights and instrument panel lights turn on. The headlights and all ...

166 2-3. Operating the lights and wipers Turning on the high beam headlights With the headlights on, push the lever forward to turn on the high beams. Pull the lever back to the center position to turn the high beams off. Pull the lever toward you to turn on the high beams. Release the lever to turn...

167 2-3. Operating the lights and wipers 2 Wh en drivin g ■ Automatic light off system Vehicles without smart key system: The headlights and tail lights turn off 30 seconds after driver’s door is opened and closed if the engine switch has been turned to “ACC” or “LOCK” position. To turn the lights o...

168 2-3. Operating the lights and wipers Fog light switch ∗ The fog lights improve visibility in difficult driving conditions, such as in rain or fog. They can be turned on only when the headlights are on low beam. Off Front fog lights on ∗ : If equipped

169 2-3. Operating the lights and wipers 2 Wh en drivin g Windshield wipers and washer Wiper intervals can be adjusted for intermittent operation. Intermittent windshield wiper operation Low speed windshield wiper operation High speed windshield wiper operation Temporary operation Increases the inte...

170 2-3. Operating the lights and wipers ■ The windshield wipers and washer can be operated when Vehicles without smart key system The engine switch is in the “ON” position. Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. ■ If no windshield washer fluid sprays C...

171 2-3. Operating the lights and wipers 2 Wh en drivin g Rear window wiper and washer ■ The rear window wiper and washer can be operated when Vehicles without smart key system The engine switch is in the “ON” position. Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON ...

172 2-4. Using other driving systems Cruise control Use the cruise control to maintain a set speed without depressing the accelerator pedal. Indicator Cruise control switch ■ Setting the vehicle speed Press the “ON-OFF” button to activate the cruise control. Press the button again to deactivate the ...

173 2-4. Using other driving systems 2 Wh en drivin g ■ Cruise control can be set when ● The shift lever is in D or 3 (4-speed models), or D or 4 (5-speed models). ● Vehicle speed is above approximately 25 mph (40 km/h). ■ Accelerating The vehicle can be accelerated normally. After acceleration, the...

174 2-4. Using other driving systems ■ Coast braking function ● Holding the lever down to decrease the set speed activates the brake system automatically, decelerating the vehicle quickly. While the brake system is operating, the stop lights and high mounted stoplight will turn on. ● A sound may be ...

175 2-4. Using other driving systems 2 Wh en drivin g CAUTION ■ To avoid operating the cruise control by mistake Switch the cruise control off using the “ON-OFF” button when not in use. ■ Situations unsuitable for cruise control Do not use cruise control in any of the following situations. Doing so ...

176 2-4. Using other driving systems Rear view monitor system (vehicles with auto anti-glare inside rear view mirror) The rear view monitor system assists the driver by displaying an image of the area behind the vehicle. The image is displayed in reverse on the screen. This reversed image is a simil...

177 2-4. Using other driving systems 2 Wh en drivin g ■ The rear view monitor system can be operated when Vehicles without smart key system The shift lever is in R, the back door is fully closed and the engine switch is in the “ON” position. Vehicles with smart key system The shift lever is in R, th...

179 2-4. Using other driving systems 2 Wh en drivin g ■ Displayed area Vehicles without spare tire Vehicles with spare tire The area covered by the camera is lim-ited. Objects that are close to either corner of the bumper or under the bumper cannot be seen on the screen. The area displayed on the sc...

180 2-4. Using other driving systems ■ Rear view monitor system camera Vehicles without spare tire In the following cases, it may become difficult to see images on the screen even if the system functions correctly. ● The vehicle is in a dark area, such as at night. ● The temperature near the lens is...

182 2-4. Using other driving systems ■ Smear effect ■ Flicker effect When the camera is used under fluorescent light, sodium lights, or mercury lights etc., the lights and the illuminated areas may appear to flicker. CAUTION ■ When using the rear view monitor system Observe the following precautions...

183 2-4. Using other driving systems 2 Wh en drivin g CAUTION ■ Conditions which may affect the rear view monitor system ● If the back of the vehicle has been hit, the camera’s position and mounting angle may have changed. Have the vehicle inspected by your Toyota dealer. ● When the outside temperat...

184 2-4. Using other driving systems Driving assist systems To help enhance driving safety and performance, the following sys- tems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when ...

185 2-4. Using other driving systems 2 Wh en drivin g When the VSC/TRAC are operating If the vehicle is in danger of slip-ping or if any of the drive wheels spins, the slip indicator light flashes to indicate that the VSC/TRAC systems are operating. A buzzer (intermittent) sounds to indicate that VS...

187 2-4. Using other driving systems 2 Wh en drivin g To disable TRAC and/or VSC (4WD models) If the vehicle gets stuck in fresh snow or mud, TRAC and VSC may reduce power from the engine to the wheels. You may need to turn the system off to enable you to rock the vehicle in order to free it. ■ Turn...

188 2-4. Using other driving systems ■ Automatic reactivation of TRAC and VSC Vehicles without smart key system Turning the engine switch OFF after turning off the TRAC and VSC systems will automatically re-enable them. Vehicles with smart key system Turning the “ENGINE START STOP” switch OFF after ...

189 2-4. Using other driving systems 2 Wh en drivin g ■ EPS operation sound When the steering wheel operates, a motor sound (whirring sound) may be heard. This does not indicate a malfunction. ■ Reduced effectiveness of EPS The effectiveness of EPS is reduced to prevent the system from overheating w...

190 2-4. Using other driving systems CAUTION ■ When the VSC is activated The slip indicator flashes and a warning buzzer sounds. Always drive care-fully. Reckless driving may cause an accident. Exercise particular care when the indicator light flashes and a buzzer sounds. ■ When TRAC and VSC are off...

191 2-4. Using other driving systems 2 Wh en drivin g Hill-start assist control ∗ ■ Hill-start assist control operating conditions • The shift lever is in a position other than P.• The parking brake is not applied.• The accelerator pedal is not depressed. ■ Hill-start assist control ● While hill-sta...

192 2-4. Using other driving systems ■ Hill-start assist control buzzer ● When hill-start assist control is activated, the buzzer will sound once when the shift lever is in a position other than R. ● In the following situations, hill-start assist control will be canceled and the buzzer will sound tw...

193 2-4. Using other driving systems 2 Wh en drivin g Downhill assist control system ∗ While the downhill assist control system is operating The slip indicator will flash to indicate that the downhill assist control system is operating, and the stop lights and high mounted stoplight will turn on. Wi...

196 2-4. Using other driving systems Four-wheel drive lock switch (4WD models) ■ Four-wheel drive lock mode can be operated when Vehicles without smart key system The engine switch is in the “ON” position. Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. ■ Four-w...

197 2 Wh en drivin g 2-5. Driving information Utility vehicle precautions Off-road vehicle feature ● Specific design characteristics give it a higher center of gravity than ordinary passenger cars. This vehicle design feature causes this type of vehicle to be more likely to rollover. And, utility ve...

198 2-5. Driving information CAUTION ■ Off-road vehicle precautions Always observe the following precautions to minimize the risk of serious per-sonal injury or damage to your vehicle: ● In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. Th...

199 2-5. Driving information 2 Wh en drivin g Off-road driving When driving your vehicle off-road, please observe the following pre-cautions to ensure your driving enjoyment and to help prevent the closure of areas to off-road vehicles. ● Drive your vehicle only in areas where off-road vehicles are ...

200 2-5. Driving information CAUTION ■ Off-road driving precautions Always observe the following precautions to minimize the risk of death or serious personal injury or damage to your vehicle: ● Drive carefully when off the road. Do not take unnecessary risks by driving in dangerous places. ● Do not...

201 2-5. Driving information 2 Wh en drivin g NOTICE ■ When you drive through water If driving through water, such as when crossing shallow streams, first check the depth of the water and the bottom of the stream for firmness. Drive slowly and avoid deep water. ■ Inspection after off-road driving ● ...

202 2-5. Driving information Cargo and luggage Adjusting the cross rail positions Turn the knobs counterclockwise to release the cross rails. Take notice of the following information about storage precau- tions, cargo capacity and load. ● Stow cargo and luggage in the luggage compartment whenever po...

203 2-5. Driving information 2 Wh en drivin g Slide the cross rails to the appro-priate position for loading lug-gage and turn the knobs clockwise to tighten the cross rails securely. Capacity and distribution Cargo capacity depends on the total weight of the occupants. (Cargo capacity) = (Total loa...

204 2-5. Driving information (6)If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. Example on your vehicle Cargo capacity Total load cap...

205 2-5. Driving information 2 Wh en drivin g As shown in the above example, if the number of occupants increases, the cargo and luggage load will be reduced by an amount that equals the increased weight due to the additional occupants. In other words, if an increase in the number of occupants cause...

207 2-5. Driving information 2 Wh en drivin g NOTICE ■ When loading luggage (vehicles with moon roof) Be careful not to scratch the surface of the moon roof.

208 2-5. Driving information Vehicle load limits ■ Total load capacity and seating capacity These details are also described on the tire and loading information label. ( → P. 380) Vehicle load limits include total load capacity, seating capacity, towing capacity and cargo capacity. ■ Total load capa...

209 2-5. Driving information 2 Wh en drivin g CAUTION ■ Overloading the vehicle Do not overload the vehicle. It may not only cause damage to the tires, but also degrade steering and braking ability, resulting in an accident.

210 2-5. Driving information Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropri- ate to the prevailing weather conditions. ■ Pre-winter preparations ● Use fluids that are appropriate to the prev...

211 2-5. Driving information 2 Wh en drivin g Selecting tire chains Use the correct tire chain size when mounting the snow chains. Chain size is regulated for each tire size. Side chain 0.12 in. (3 mm) in diameter 0.39 in. (10 mm) in width 1.18 in. (30 mm) in length Cross chain 0.16 in. (4 mm) in di...

212 2-5. Driving information ■ Tire chain installation Observe the following precautions when installing and removing chains. ● Install and remove tire chains in a safe location. ● Install tire chains on the front tires. ● Install tire chains following the instructions provided in the accompanying m...

213 2-5. Driving information 2 Wh en drivin g NOTICE Vehicles with a tire pressure warning system: ■ Repairing or replacing snow tires Request repairs of and obtain replacement snow tires from Toyota dealers or legitimate tire retailers. This is because the removal and attachment of snow tires affec...

214 2-5. Driving information Trailer towing Your vehicle is designed primarily as a passenger-carrying vehicle. Towing a trailer will have an adverse effect on handling, perfor- mance, braking, durability, and fuel consumption. For your safety and the safety of others, do not overload the vehicle or...

215 2-5. Driving information 2 Wh en drivin g ■ Trailer tongue load The trailer cargo load should be distributed so that the tongue load is 9 to 11% of the total trailer weight, not exceeding the maximum load of the following. (Tongue load / Total trailer weight x 100 = 9 to 11%) 2.5 L 4-cylinder (2...

217 2-5. Driving information 2 Wh en drivin g Selecting a trailer ball Use the correct trailer ball for your application. Trailer ball load rating Matches or exceeds the gross trailer weight rating of the trailer. Ball diameter Matches the size of the trailer coupler. Most couplers are stamped with ...

218 2-5. Driving information Connecting trailer lights Please consult your dealer when installing trailer lights, as incorrect installation may cause damage to the vehicle's lights. Please take care to comply with your state's laws when installing trailer lights. ■ Before towing ● Ensure that your v...

219 2-5. Driving information 2 Wh en drivin g CAUTION ■ To avoid accident or injury ● Do not exceed the trailer hitch assembly weight, gross vehicle weight, gross axle weight and trailer tongue load capacities. ● Never load more weight in the back than in the front of the trailer. About 60% of the l...

220 2-5. Driving information Trailer towing tips Your vehicle will handle differently when towing a trailer. In order to avoid accident, death or serious injury, keep the following in mind when towing: ● Before starting out, check the trailer lights and the vehicle-trailer connections. Recheck after...

221 2-5. Driving information 2 Wh en drivin g ● Reversing with a trailer attached is difficult and requires practice. Grip the bottom of the steering wheel and move your hand to the left to move the trailer to the left. Move your hand to the right to move the trailer to right. (This is generally opp...

223 2-5. Driving information 2 Wh en drivin g CAUTION ■ To avoid an accident ● Do not exceed 45 mph (72 km/h) or posted towing speed limit, whichever is lower. As instability (swaying) of the towing vehicle-trailer combination increases as speed increases, exceeding 45 mph (72 km/h) may cause loss o...

224 2-5. Driving information Dinghy towing NOTICE ■ To avoid serious damage to your vehicle ■ To prevent causing serious damage to the transmission and Active Torque Control 4WD system (4WD models) Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. Do ...

226 3-1. Using the air conditioning system and defogger Manual air conditioning system ∗ Adjusting the settings ■ Adjusting the temperature setting Turn the temperature control dial clockwise (warm) or counter-clockwise (cool). If is not pressed, the system will blow ambient temperature air or heate...

227 3-1. Using the air conditioning system and defogger 3 Inte rior fe atures ■ Changing the air outlets Set the air outlet selection dial to an appropriate position. The positions between the air outlet selections shown below can be also selected for more detailed adjustment. Air flows to the upper...

228 3-1. Using the air conditioning system and defogger Air flows to the feet and the windshield defogger operates. The air intake is automatically switched to outside air mode. It is not possible to return to recircu-lated air mode when the dial is set at this position. Pressing to turn the air con...

229 3-1. Using the air conditioning system and defogger 3 Inte rior fe atures Adjusting the position of the air outlets Front outlets (center) Direct air flow to the left or right, up or down. Front outlets (right and left sides) Direct air flow to the left or right, up or down. Opening and closing ...

232 3-1. Using the air conditioning system and defogger Automatic air conditioning system ∗ Using the automatic mode Press . The air conditioning system begins to operate. Air outlets and fan speed are automatically adjusted according to the temperature set-ting. Press “ ∧ ” on to increase the tempe...

234 3-1. Using the air conditioning system and defogger ■ Changing the air outlets Press the desired button, , , or . The air flow shown on the display indicates the following. Air flows to the upper body. Air flows to the upper body and feet. : Vehicles with third seats Air flows mainly to the feet...

235 3-1. Using the air conditioning system and defogger 3 Inte rior fe atures Air flows to the feet and the windshield defogger operates. : Vehicles with third seats ■ Switching between outside air and recirculated air modes Press . The mode switches between outside air mode (indicator off) and reci...

236 3-1. Using the air conditioning system and defogger Micro dust and pollen filter Press . Outside air mode will be switched to recirculated air mode. Pollen is removed from the air and the air flows to the upper part of the body. Usually the system will turn off automatically after approximately ...

237 3-1. Using the air conditioning system and defogger 3 Inte rior fe atures Front outlets (right and left sides) Direct air flow to the left or right, up or down. Opening and closing the side outlets Open the vent. Close the vent. ■ Using the automatic mode Fan speed is adjusted automatically in a...

239 3-1. Using the air conditioning system and defogger 3 Inte rior fe atures CAUTION ■ To prevent the windshield from fogging up Do not use during cool air operation in extremely humid weather. The difference between the temperature of the outside air and that of the wind-shield can cause the outer...

240 3-1. Using the air conditioning system and defogger Rear window and outside rear view mirror defoggers The rear window defogger is used to defog the rear window. The out- side rear view mirror defoggers * are used to remove frost, dew or raindrops from the outside rear view mirrors. Vehicles wit...

241 3-1. Using the air conditioning system and defogger 3 Inte rior fe atures ■ The defogger can be operated when Vehicles without smart key system The engine switch is in the “ON” position. Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. ■ Outside rear view mir...

242 3-1. Using the air conditioning system and defogger Windshield wiper de-icer ∗ ■ The de-icer can be operated when Vehicles without smart key system The engine switch is in the “ON” position. Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. CAUTION ■ When the ...

243 3 Inte rior fe atures 3-2. Using the audio system Audio system types With navigation system Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”. Without navigation system (type A) CD player with changer controller and AM/FM radio Without navi...

244 3-2. Using the audio system ■ Using cellular phones Interference may be heard through the audio system's speakers if a cellular phone is being used inside or close to the vehicle while the audio system is operating. Without navigation system (type C) CD player with changer and AM/FM radio Title ...

245 3-2. Using the audio system 3 Inte rior fe atures CAUTION ■ For vehicles sold in U.S.A. and Canada (for U.S.A. and Canada) ● Part 15 of the FCC Rules FCC Warning: Any unauthorized changes or modifications to this equipment will void the user’s authority to operate this device. ● Laser products •...

246 3-2. Using the audio system Using the radio Setting station presets (excluding XM ® Satellite Radio) Search for desired stations by turning or pressing “ ∧ ” or “ ∨ ” on . Press and hold the button (from to ) the station is to be set to until you hear a beep. Seeking the frequency Station select...

248 3-2. Using the audio system ■ Changing the channel category Press “ ∧ ” or “ ∨ ” on . ■ Scanning XM ® Satellite Radio channels ● Scanning channels in the current category Press . When the desired channel is reached, press again. ● Scanning preset channels Press and hold until you hear a beep. Wh...

249 3-2. Using the audio system 3 Inte rior fe atures ■ When the battery is disconnected Station presets are erased. ■ Reception sensitivity ● Cargo loaded on the roof luggage carrier, especially metal objects, may adversely affect the reception of XM ® Satellite Radio. ● Maintaining perfect radio r...

250 3-2. Using the audio system ■ If the satellite radio does not operate normally (if equipped) If a problem occurs with the XM ® tuner, a message will appear on the dis- play. Refer to the table below to identify the problem, and take the suggested corrective action. “ANTENNA” The XM ® antenna is ...

251 3-2. Using the audio system 3 Inte rior fe atures Contact the XM ® Listener Care Center at 1-800-967-2346 (U.S.A.) or 1-877- 438-9677 (Canada). ■ Certifications for the radio tuner This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 1...

252 3-2. Using the audio system Using the CD player Loading CDs ■ Loading a CD Type A Insert a CD. Type B and C Press . “WAIT” is shown on the display. Insert a CD when the indicator on the slot turns from amber to green. The display changes from “WAIT” to “LOAD”. Random playback Track selection Rep...

253 3-2. Using the audio system 3 Inte rior fe atures ■ Loading multiple CDs (type B and C) Press and hold until you hear a beep. “WAIT” is shown on the display. Insert a CD when the indicator on the slot turns from amber to green. The display changes from “WAIT” to “LOAD”. The indicator on the slot...

255 3-2. Using the audio system 3 Inte rior fe atures Random playback ■ Current CD Press (RAND). Tracks are played in a random order until is pressed once more. ■ All CDs (with a CD changer) Press and hold (RAND) until you hear a beep. Tracks on all loaded CDs are played in a random order until is p...

257 3-2. Using the audio system 3 Inte rior fe atures NOTICE ■ CDs that cannot be used Do not use the following types of CDs or Dual Discs. Doing so may damage the CD player and/or the CD insert/eject function. ● Type A: CDs that have a diameter other than 4.7 in. (12 cm) or 3 in. (8 cm) ● Type B an...

258 3-2. Using the audio system NOTICE ■ CD player precautions Failure to follow the precautions below may result in serious damage to the CDs or the player itself. ● Do not insert anything other than CDs into the CD slot. ● Do not apply oil to the CD player. ● Store CDs away from direct sunlight. ●...

259 3-2. Using the audio system 3 Inte rior fe atures Playing back MP3 and WMA discs Loading and ejecting MP3 and WMA discs → P. 252 Selecting an MP3 and WMA disc (with a CD changer) → P. 254 Random playback File selection Repeat play Playback CD eject Displaying text messages CD selection (with a C...

263 3-2. Using the audio system 3 Inte rior fe atures ■ MP3 and WMA files MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size using MP3 compression. WMA (Windows Media TM Audio) is a Microsoft audio compression format. ...

266 3-2. Using the audio system Optimal use of the audio system Displays the current mode Changes the following set-ting ● Sound quality and vol-ume balance ( → P. 267) The sound quality and bal-ance setting can be changed to produce the best sound. ● Volume and tone quality level (Automatic Sound L...

267 3-2. Using the audio system 3 Inte rior fe atures Using the audio control function ■ Changing sound quality modes Pressing selects the mode to be changed in the following order. “BAS” → “MID”* → “TRE” → “FAD” → “BAL” → “ASL” *: Type C only ■ Adjusting sound quality Turning adjusts the level. *: ...

268 3-2. Using the audio system ■ Adjusting the Automatic Sound Levelizer (ASL) Type A and B When “ASL” is selected, turning to the right changes the “ASL” level in the order of “LOW”, “MID” and “HIGH”. Turning to the left turns “ASL” off. ASL automatically adjusts the volume and tone quality accord...

269 3-2. Using the audio system 3 Inte rior fe atures Using the AUX port ■ Operating portable audio devices connected to the audio system The volume can be adjusted using the vehicle's audio controls. All other adjustments must be made on the portable audio device itself. ■ When using a portable aud...

270 3-2. Using the audio system Using the steering wheel audio switches ∗ Turning on the power Press when the audio system is turned off. The audio system can be turned off by holding down until you hear a beep. Changing the audio source Press when the audio system is turned on. The audio source cha...

271 3-2. Using the audio system 3 Inte rior fe atures Adjusting the volume Press “+” on to increase the volume and “-” to decrease the vol- ume. Press and hold to continue increasing or decreasing the volume. Selecting a radio station Press to select the radio mode. Press “ ∧ ” or “ ∨ ” on to select...

272 3-2. Using the audio system CAUTION ■ To reduce the risk of an accident Exercise care when operating the audio switches on the steering wheel.

273 3 Inte rior fe atures 3-3. Using the hands-free phone system (for cellular phone) Hands-free phone system (for cellular phone) features ∗ ■ Conditions affecting operation The hands-free phone system may not operate normally in the following situ-ations: ● The cellular phone is turned off, or loc...

274 3-3. Using the hands-free phone system (for cellular phone) ■ Required profiles for the cellular phone ● HFP (Hands Free Profile) Ver. 1.0 ● OPP (Object Push Profile) Ver. 1.1 If your cellular phone does not support HFP, the Bluetooth ® phone cannot be entered and OPP serviced cannot be provided...

276 3-3. Using the hands-free phone system (for cellular phone) CAUTION ■ Caution while driving Do not use a cellular phone or connect the Bluetooth ® phone. NOTICE ■ To prevent damage to a cellular phone Do not leave a cellular phone in the vehicle. The temperature inside may become high resulting ...

277 3-3. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures Using the hands-free phone system (for cellular phone) ∗ ■ Audio unit Displays such items as messages, name, and phone number Lower-case characters and special characters, such as an umlaut, cannot be dis-played. S...

278 3-3. Using the hands-free phone system (for cellular phone) ■ Steering wheel telephone switches Volume The voice guidance volume cannot be adjusted using this button. Hands-free phone system off/ends a call/refuses a call Hands-free phone system on/starts a call Press: Voice command sys-tem on P...

279 3-3. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures Operating the system using a voice command By following voice guidance instructions output from the speaker, voice commands can be given to allow for operation of the hands- free phone system without checking the d...

280 3-3. Using the hands-free phone system (for cellular phone) Using the hands-free phone system for the first time Before using the hands-free phone system, it is necessary to register a cellular phone in the system. The phone registration mode will be entered automatically when starting the syste...

281 3-3. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures Menu list of the hands-free phone system ■ Normal operation First menu Second menu Third menu Operation detail Callback - - Dialing a number stored in the incoming call history memory Redial - - Dialing a number st...

283 3-3. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures ■ Using a short cut key First menu Second menu Operation detail Dial “XXX (name)” - Dialing a number registered in the phone book Phone book add entry - Adding a new number Phone book change name - Changing the nam...

285 3-3. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures Making a phone call ■ Making a phone call ● Dialing by inputting a number “Dial by number” ● Dialing by inputting a name “Dial by name” ● Speed dialing ● Dialing a number stored in the outgoing history memory “Redi...

286 3-3. Using the hands-free phone system (for cellular phone) Dialing by inputting a number Press and say “Dial by number”. Press and say the phone number. Dial by one of the following methods: a. Press . b. Press and say “Dial”. c. Select “Dial” using . STEP 1 STEP 2 STEP 3

287 3-3. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures Dialing by inputting a name Press and say “Dial by name”. Select a registered name to be input by either of the following methods: a. Press and say a registered name. b. Press and say “List names”. Press while the ...

289 3-3. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures Using the call history memory Follow the procedure below to use a number stored in the call history memory: Press and say “Redial” (when using a number stored in the outgoing call history memory) or “Call back” (wh...

290 3-3. Using the hands-free phone system (for cellular phone) ■ Call history Up to 5 phone numbers can be stored in each of the outgoing and incoming call history memories. ■ When talking on the phone ● Do not talk simultaneously with the other party. ● Keep the volume of the received voice down. ...

291 3-3. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures Setting a cellular phone Registering a cellular phone Select “Pair Phone” using a voice command or , and do the procedure for registering a cellular phone. ( → P. 280) Registering a cellular phone in the hands-free...

293 3-3. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures b. Press and say “List phones”. While the desired phone name is being read aloud, press . c. Select the desired phone name using . Press or select “Record Name” using , and say a new name. Select “Confirm” using a ...

295 3-3. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures Pattern B Select a 4 to 8-digit number using . The number should be input 1 digit at a time. When the entire number to be registered as a passkey has been input, press once again. ■ The number of cellular phones th...

296 3-3. Using the hands-free phone system (for cellular phone) Security and system setup Setting or changing the PIN ■ Setting a PIN Select “Set PIN” using a voice command or . Enter a PIN using a voice command or . When using , input the code 1 digit at a time. ■ Changing the PIN Select “Set PIN” ...

297 3-3. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures Enter the registered PIN using a voice command or . Enter a new PIN using a voice command or . When using , input the code 1 digit at a time. Locking or unlocking the phone book Select “Phonebook lock (Phbk Lock)” ...

298 3-3. Using the hands-free phone system (for cellular phone) Initialization Select “Initialize” and then “Confirm” using . Select “Confirm” using . ■ Initialization ● The following data in the system can be initialized: • Phone book• Outgoing and incoming call history• Speed dials• Registered cel...

299 3-3. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures Using the phone book Adding a new phone number The following methods can be used to add a new phone number: ● Inputting a phone number using a voice command ● Transferring data from the cellular phone ● Inputting a...

300 3-3. Using the hands-free phone system (for cellular phone) ■ Adding procedure Select “Add Entry” using a voice command or . Use one of the following methods to input a phone number: Inputting a phone number using a voice command STEP2-1:Select “By Voice” using a voice command or . STEP2-2:Press...

302 3-3. Using the hands-free phone system (for cellular phone) Select the name to be registered by either of the following methods, and select “Confirm” using a voice command or : a. Press and say the desired name. b. Select “Record Name” using , and say the desired name. Select “Confirm” using a v...

303 3-3. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures b. Press , and say “List names”. While the desired name is being read aloud, press , and select “Con- firm” using a voice command or . c. Select the desired data using . Select the desired preset button, and regist...

304 3-3. Using the hands-free phone system (for cellular phone) b. Press , and say “List names”. While the desired name is being read aloud, press , and select “Con- firm” using a voice command or . c. Select the desired name using . Press or select “Record Name” using , and say a new name. Select “...

305 3-3. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures b. Press , say “List phones”. While the name of the desired phone number is being read aloud, press . Pattern B Select the data to be deleted using . Deleting speed dials Select “Delete Speed Dial (Del Spd Dial)” u...

306 3-3. Using the hands-free phone system (for cellular phone) ■ Limitation of number of digits A phone number that exceeds 24 digits cannot be registered.

307 3 Inte rior fe atures 3-4. Using the interior lights Interior lights list Your Toyota is equipped with the illuminated entry system to assist in entering the vehicle. Owing to the function of the system, the lights shown in the following illustration (except the luggage com- partment light) auto...

308 3-4. Using the interior lights Personal/interior light main switch Type A Door position The personal lights and interior light come on when a door is opened. They go off when the doors are closed. Off The personal lights and interior light can be individually turned on or off. Type B Personal/in...

309 3-4. Using the interior lights 3 Inte rior fe atures Type B On/off Interior light Door position Off On Luggage compartment light On Off Personal/interior lights and interior light and luggage compartment light

311 3 Inte rior fe atures 3-5. Using the storage features List of storage features CAUTION ■ Items that should not be left in the storage spaces Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: ● Glasses may be d...

312 3-5. Using the storage features Glove box Unlock with the master key (vehicles without smart key system) or mechanical key (vehicles with smart key sys-tem) Lock with the master key (vehicles without smart key system) or mechanical key (vehicles with smart key sys-tem) Open (pull lever) CAUTION ...

313 3-5. Using the storage features 3 Inte rior fe atures Console box Upper tray Lift the lid. Lower box Pull the lever up and lift the lid. CAUTION ■ Caution while driving Keep the console box closed. Injuries may result in the event of an accident or sudden braking. Console box

314 3-5. Using the storage features Overhead console The overhead console is useful for temporarily storing sunglasses and similar small items. Press the lid. CAUTION ■ Caution while driving Keep the overhead console closed. Injuries may result in the event of an accident or sudden braking. ■ Items ...

315 3-5. Using the storage features 3 Inte rior fe atures Cup holders Type A Removing the adapters changes the size. ( → P. 315) Type B To use the cup holders, pull the strap forward and fold down the center seatback. ■ Adjusting size of the cup holders (type A only) Remove the adapters. Cup holders

316 3-5. Using the storage features Bottle holders Front seat Second seat CAUTION ■ Items unsuitable for the cup holder Do not place anything other than cups or aluminum cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause inju...

317 3-5. Using the storage features 3 Inte rior fe atures Third seat CAUTION ■ Items unsuitable for the bottle holder Do not place anything other than a bottle in the bottle holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury. NOTICE ■...

318 3-5. Using the storage features Auxiliary box To open and close the auxiliary box, press the button. CAUTION ■ Caution while driving Keep the auxiliary box closed. Injuries may result in the event of an accident or sudden braking. NOTICE ■ Operating the auxiliary box If it is difficult to open o...

319 3 Inte rior fe atures 3-6. Other interior features Sun visors Forward position: Flip down. Side position: Flip down, unhook, and swing to the side. Side extender: Place in side position then slide backwards.

320 3-6. Other interior features Vanity mirrors Slide the cover. The light turns on when the cover is opened.

321 3-6. Other interior features 3 Inte rior fe atures Clock ■ The clock is displayed when Vehicles without smart key system The engine switch is in the “ACC” or “ON” position. Vehicles with smart key system The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode. ■ When disconnecting and...

322 3-6. Other interior features Power outlets The power outlet can be used for a following component. 12 V: Accessories that use less than 10 A. 120 VAC: Accessories that use less than 100 W. ■ 12 V Type A Type B Type C

323 3-6. Other interior features 3 Inte rior fe atures ■ The power outlet can be used when 12 V ● Vehicles without smart key system The engine switch is in the “ACC” or “ON” position. ● Vehicles with smart key system The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode. 120 VAC ● Vehic...

324 3-6. Other interior features CAUTION ■ Using a power outlet Observe the following precautions to reduce the risk of injury. ● Use of the power outlet when it is wet with water or snow may result in electrical shocks and is extremely dangerous. The power outlet must be thoroughly dried before use...

325 3-6. Other interior features 3 Inte rior fe atures NOTICE ■ To avoid damaging the power outlet and the plug ● Close the power outlet lid when not in use. ● Do not allow foreign objects or liquids to enter the power outlet, as this may cause a short circuit. ● Do not use plug adaptors to connect ...

326 3-6. Other interior features NOTICE ■ To prevent any damage caused by heat ● Do not use any electrical appliances that give off intense heat, such as toasters, in any locations including the internal or external trim, seats and deck. ● Do not use any electrical appliances that are easily affecte...

327 3-6. Other interior features 3 Inte rior fe atures Seat heaters ∗ ■ The seat heaters can be used when Vehicles without smart key system The engine switch is in the “ON” position. Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. CAUTION ■ Burns ● Use caution w...

328 3-6. Other interior features NOTICE ■ To prevent seat heater damage Do not put unevenly weighted objects on the seat and do not stick sharp objects (needles, nails, etc.) into the seat. ■ To prevent battery discharge Turn the switches off when the engine is not running.

329 3-6. Other interior features 3 Inte rior fe atures Armrest NOTICE ■ To prevent damage to the armrest Do not place too much strain on the armrest. To use the armrest, pull the strap forward and fold down the center seatback.

330 3-6. Other interior features Coat hooks CAUTION ■ Items that must not be hung on the hook Do not hang a coat hanger or other hard or sharp objects on the hook. If the SRS curtain shield airbags deploy, these items may become projectiles that cause death or serious injury. NOTICE ■ To prevent dam...

331 3-6. Other interior features 3 Inte rior fe atures Floor mat CAUTION Observe the following precautions. Failure to do so may cause the driver's floor mat to slip, possibly interfering with the pedals while driving. An unexpectedly high speed may result or it may become difficult to stop the vehi...

332 3-6. Other interior features Luggage compartment features ■ Cargo hooks Cargo hooks are provided for securing loose items. ■ Grocery bag hooks ■ Storage box (vehicles without third seats) Type A The rear deck board can be folded up into two positions. Lift the rear deck board. STEP 1

333 3-6. Other interior features 3 Inte rior fe atures Fold up the deck board. The lid can be removed. Type B Lift the front deck board. STEP 2

334 3-6. Other interior features Removing the luggage cover (if equipped) The luggage cover can be removed by following the procedure below. Detach the hooks of the luggage cover. Compress the end of the lug-gage cover and lift the luggage cover up. ■ Luggage cover (if equipped) Attach the hooks to ...

336 3-6. Other interior features CAUTION ■ When the cargo hooks are not in use To avoid injury, always return the cargo hooks to their stowed positions. ■ Caution while driving ● Do not drive with any of the deck boards opened. Items may fall out and cause injury. ● Do not place anything on the lugg...

338 4-1. Maintenance and care Cleaning and protecting the vehicle exterior ■ Automatic car washes ● Before washing the vehicle, do the following. • Fold the mirrors back.• Remove the antenna. Make sure to re-install the antenna and extend the mirrors before driving. ● Brushes used in automatic car w...

339 4-1. Maintenance and care 4 Mainten ance an d ca re ■ Aluminum wheels ● Remove any dirt immediately by using a neutral detergent. Do not use hard brushes or abrasive cleaners. Do not use strong or harsh chemical cleaners. Use the same mild detergent and wax as used on the paint. ● Do not use det...

340 4-1. Maintenance and care NOTICE ■ To prevent paint deterioration and corrosion on the body and compo-nents (aluminum wheels etc.) ● Wash the vehicle immediately in the following cases: • After driving near the sea coast• After driving on salted roads• If you see coal tar or tree sap on the pain...

341 4-1. Maintenance and care 4 Mainten ance an d ca re Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle's interior and keep it in top condition: ■ Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty sur-faces wi...

342 4-1. Maintenance and care ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle's interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to app...

343 4-1. Maintenance and care 4 Mainten ance an d ca re NOTICE ■ Cleaning detergents ● Do not use organic substances such as benzene or gasoline, acidic or alkaline solutions, dye, bleach or other detergent. Doing so may discolor the vehicle interior or cause streaks or damage to painted surfaces. ●...

344 4-2. Maintenance Maintenance requirements ■ Repair and replacement It is recommended that genuine Toyota parts be used for repair to ensure performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than a Toyota dealer performs repairs, confirm the war-ran...

345 4-2. Maintenance 4 Mainten ance an d ca re ■ Allow inspection and repairs to be performed by a Toyota dealer ● Toyota technicians are well-trained specialists and are kept up to date with the latest service information. They are well informed about the operations of all systems on your vehicle. ...

346 4-2. Maintenance General maintenance Engine compartment Items Check points Battery Maintenance-free. ( → P. 369) Brake fluid At the correct level? ( → P. 367) Engine coolant At the correct level? ( → P. 365) Engine oil At the correct level? ( → P. 361) Exhaust system No fumes or strange sounds? ...

347 4-2. Maintenance 4 Mainten ance an d ca re Vehicle interior Items Check points Accelerator pedal • Moves smoothly (without uneven pedal effort or catching)? Automatic transmission “Park” mechanism • Can the vehicle be held securely on an incline with the shift lever in P? Brake pedal • Moves smo...

348 4-2. Maintenance Vehicle exterior Items Check points Doors • Operate smoothly? Engine hood • The lock system works properly? Fluid leaks • Is there any leakage after park- ing? Tires • Inflation pressure is correct?• Tire surfaces not worn or dam- aged? • Tires rotated according to the maintenan...

349 4-2. Maintenance 4 Mainten ance an d ca re Emission inspection and maintenance (I/M) programs Some states have vehicle emission inspection programs which include OBD (On Board Diagnostics) checks. The OBD system moni- tors the operation of the emission control system. ■ If the malfunction indica...

351 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Items Parts and tools Fuses ( → P. 392) • Fuse with same amperage rating as original Radiator and condenser ( → P. 366) ⎯ Tire inflation pressure ( → P. 380) • Tire pressure gauge• Compressed air source Washer fluid ( → P. 372) • Water wa...

352 4-3. Do-it-yourself maintenance CAUTION The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury, observe the following precautions. ■ When working on the engine compartment ● Keep hands, clo...

353 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re NOTICE ■ If you remove the air cleaner filter Driving with the air cleaner removed may cause excessive engine wear due to dirt in the air. Also a backfire could cause a fire in the engine compart-ment.

354 4-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood release lever. The hood will pop up slightly. Lift the auxiliary catch lever and lift the hood. Hold the hood open by insert-ing the supporting rod into the slot. STEP 1 STEP 2 ST...

355 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION ■ Pre-driving check Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. ■ After install...

356 4-3. Do-it-yourself maintenance Positioning a floor jack When raising your vehicle with a floor jack, position the jack cor- rectly. Improper placement may damage your vehicle or cause injury. ■ Front ■ Rear

357 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION ■ When raising your vehicle Make sure to observe the following to reduce the possibility of death or seri-ous injury. ● When using a floor jack, follow the instructions of the manual provided with the jack. ● Do not use the jack t...

361 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. ■ Checking the engine oil Park the vehicle on level ground. After turning off the engine, wait more than five minutes for the oil to ...

362 4-3. Do-it-yourself maintenance 3.5 L V6 (2GR-FE) engine Low Full ■ Adding engine oil If the oil level is below or near the low level mark, add engine oil of the same type as already in the engine. Make sure to check the oil type and prepare the items needed before adding oil. Remove the oil fil...

363 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Engine oil consumption ● The amount of engine oil consumed depends on the oil viscosity, the quality of the oil and the way the vehicle is driven. ● More oil is consumed under driving conditions such as high speeds and frequent accelera...

364 4-3. Do-it-yourself maintenance CAUTION ■ Used engine oil ● Used engine oil contains potentially harmful contaminants which may cause skin disorders such as inflammation or skin cancer, so care should be taken to avoid prolonged and repeated contact. To remove used engine oil from your skin, was...

365 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Engine coolant The coolant level is satisfactory if it is between the “FULL” and “LOW” lines on the reservoir when the engine is cold. Reservoir cap “FULL” “LOW” If the level is on or below the “LOW” line, add coolant up to the “FULL” lin...

366 4-3. Do-it-yourself maintenance Radiator and condenser Check the radiator and condenser, and clear any foreign objects. If either of the above parts are extremely dirty or you are not sure of their condition, have your vehicle checked by your Toyota dealer. NOTICE ■ When adding engine coolant Co...

367 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Brake fluid ■ Checking fluid level The brake fluid level should be between the “MAX” and “MIN” lines on the tank. Make sure to check the fluid type and prepare the necessary items. ■ Adding fluid Fluid type SAE J1703 or FMVSS No.116 DOT 3...

368 4-3. Do-it-yourself maintenance CAUTION ■ When filling the reservoir Take care because brake fluid can harm your hands or eyes and damage painted surfaces. If fluid gets on your hands or in your eyes, flush the affected area with clean water immediately. If you still experience discomfort, see a...

369 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Battery ■ Battery exterior Make sure that the battery terminals are not corroded and that there are no loose connections, cracks, or loose clamps. Terminals Hold-down clamp ■ Checking battery fluid Check that the level is between the “UPP...

370 4-3. Do-it-yourself maintenance ■ After recharging/reconnecting the battery (vehicles with smart key sys-tem) In some cases, the engine may not start. Follow the procedure below to ini-tialize the system. Shift the shift lever to P, and turn the “ENGINE START STOP” switch OFF. Open and close any...

371 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION ■ Emergency measures regarding electrolyte ● If electrolyte gets in your eyes Flush your eyes with clean water for at least 15 minutes and get immedi-ate medical attention. If possible, continue to apply water with a sponge or clo...

372 4-3. Do-it-yourself maintenance Washer fluid For vehicles sold in U.S.A. Add washer fluid in the following situations. ● Any washer does not work. ● The low washer fluid warning light comes on. For vehicles sold in Canada If any washer does not work or the low windshield washer fluid warn-ing li...

373 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Tires Replace or rotate tires in accordance with maintenance sched- ules and treadwear. ■ Checking tires New tread Treadwear indicator Worn tread The location of treadwear indicators is shown by the “TWI” or “ ” marks, etc., molded on the...

374 4-3. Do-it-yourself maintenance Except vehicles with a spare tire of the same wheel type as the installed tires Rotate the tires in the order shown. To equalize tire wear and extend tire life, Toyota recom-mends that tire rotation is carried out at the same inter-val as tire inspection. ■ The ti...

376 4-3. Do-it-yourself maintenance ■ When to replace your vehicle's tires Tires should be replaced if: ● You have tire damage such as cuts, splits, cracks deep enough to expose the fabric, or bulges indicating internal damage. ● A tire goes flat repeatedly or cannot be properly repaired due to the ...

377 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Tire types 1 Summer tires Summer tires are high-speed performance tires best suited to highway driving under dry conditions. Since summer tires do not have the same traction performance as snow tires, summer tires are inadequate for dri...

378 4-3. Do-it-yourself maintenance ■ Tire pressure warning system certification FCC ID: PAXPMV107J FCC ID: HYQ13BCX For vehicles sold in the U.S.A. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfe...

379 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re NOTICE ■ Repairing or replacing tires, wheels, tire pressure warning valves and transmitters and tire valve caps (vehicles with a tire pressure warning system) ● When removing or fitting the wheels, tires or the tire pressure warning valv...

380 4-3. Do-it-yourself maintenance Tire inflation pressure ■ Tire inflation pressure The recommended cold tire inflation pressure and tire size is dis-played on the tire and loading information label. ( → P. 489)

381 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Tire inflation pressure check interval You should check tire inflation pressure every two weeks, or at least once a month. Do not forget to check the spare. ■ Inspection and adjustment procedure Tire valve Tire pressure gauge Remove the...

383 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION ■ Proper inflation is critical to save tire performance Keep your tires properly inflated. Otherwise, the following conditions may occur and result in an accident causing death or serious injury. ● Excessive wear ● Uneven wear ● P...

384 4-3. Do-it-yourself maintenance Wheels If a wheel is bent, cracked or heavily corroded, it should be replaced. Otherwise, the tire may separate from the wheel or cause loss of handling control. ■ Wheel selection When replacing wheels, care should be taken to ensure that they are equivalent to th...

385 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ When replacing wheels (vehicles with a tire pressure warning sys-tem) The wheels of your Toyota are equipped with tire pressure warning valves and transmitters that allow the tire pressure warning system to provide advanced warning in t...

386 4-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. ■ Removal method Vehicles without smart key system: Turn the engine switch off. Vehicles with smart key system: Turn the “ENGINE START STOP” swit...

387 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Checking interval Inspect and replace the air conditioning filter according to the maintenance schedule. In dusty areas or areas with heavy traffic flow, early replacement may be required. (For scheduled maintenance information, please ...

388 4-3. Do-it-yourself maintenance Key battery Replace the battery with a new one if it is discharged. ■ You will need the following items: ● Flathead screwdriver (To prevent damage to the key, cover the tip of the screwdriver with a rag.) ● Small Flathead screwdriver ● Lithium battery CR2016 (vehi...

389 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Open the case cover using a coin protected with tape etc. and remove the depleted bat-tery. Insert a new battery with the “+” terminal facing up. ■ Replacing the battery (vehicles with smart key system) Take out the mechanical key. Remove...

390 4-3. Do-it-yourself maintenance ■ If the key battery is depleted The following symptoms may occur. ● The smart key system and wireless remote control will not function prop-erly. ● The operational range is reduced. ■ Use a CR2016 (vehicles without smart key system) or CR1632 (vehicles with smart...

391 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re NOTICE ■ For normal operation after replacing the battery Observe the following precautions to prevent accidents. ● Always work with dry hands. Moisture may cause the battery to rust. ● Do not touch or move any other components inside the...

392 4-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. Vehicles without smart key system: Turn the engine switch off. Vehicles with smart key system: Turn t...

393 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Under the instrument panel Remove the lid. After a system failure, see “Fuse layout and amperage rat-ings” ( → P. 396) for details about which fuse to check. Remove the fuse with the pull-out tool. Check if the fuse has blown. STEP 4 STEP...

394 4-3. Do-it-yourself maintenance Type A Normal fuse Blown fuse Replace it with one of an appropriate amperage rating. The amperage rating can be found on the fuse box lid. Type B Normal fuse Blown fuse Replace it with one of an appropriate amperage rating. The amperage rating can be found on the ...

398 4-3. Do-it-yourself maintenance * 1 : Vehicles with towing package * 2 : Vehicles with 2.5 L 4-cylinder (2AR-FE) engine * 3 : Vehicles with 3.5 L V6 (2GR-FE) engine Type B (driver’s side) 23 CDS* 2 30 A Electric cooling fan FAN 1* 3 50 A 24 H-LP CLN 30 A No circuit Fuse Ampere Circuit 1 AMP 30 A...

403 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ After a fuse is replaced ● If the lights do not turn on even after the fuse has been replaced, a bulb may need replacement. ( → P. 404) ● If the replaced fuse blows again, have the vehicle inspected by your Toyota dealer. ■ If there is ...

404 4-3. Do-it-yourself maintenance Light bulbs You may replace the following bulbs yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs...

405 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Rear bulb locations Vehicles without a spare tire Vehicles with a spare tire Rear turn signal and back-up lights License plate lights Rear side marker lights Rear turn signal and back-up lights License plate light Rear side marker light...

407 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Reinstalling the clip ■ Front turn signal, parking and front side marker lights Right side only: Remove the clip and move it aside to allow easy access to the light bulbs. Turn the bulb base counterclock-wise. Remove the light bulb. STEP ...

409 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Unplug the connector while depressing the lock release. Turn the bulb base counterclock-wise. ■ Back-up lights, rear turn signal and rear side marker lights Open the back door ( → P. 46) and remove the cover. Turn the bulb base counterclo...

410 4-3. Do-it-yourself maintenance Remove the light bulb. Rear side marker light Rear turn signal light Back-up light ■ License plate lights Vehicles without a spare tire Remove the cover as shown in the illustration. Turn the bulb base counterclock-wise. Remove the light bulb. STEP 3 STEP 1 STEP 2...

411 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Vehicles with a spare tire Use a flathead screwdriver to disengage the side of the lamp. Turn the bulb base counterclock-wise. Remove the light bulb. ■ Light other than the above If any of the lights listed below has burnt out, have it re...

412 4-3. Do-it-yourself maintenance ■ Condensation build-up on the inside of the lens Contact your Toyota dealer for more information in the following situations. Temporary condensation build-up on the inside of the headlight lens does not indicate a malfunction. ● Large drops of water are built up ...

414 5-1. Essential information Emergency flashers NOTICE ■ To prevent battery discharge Do not leave the emergency flashers on longer than necessary when the engine is not running. Use the emergency flashers if the vehicle malfunctions or is involved in an accident. Press the switch to flash all the...

5 Wh en t ro uble ar ises 415 5-1. Essential information If your vehicle needs to be towed Before towing The following may indicate a problem with your transmission. Contact your Toyota dealer before towing. ● The engine is running, but the vehicle will not move. ● The vehicle makes an abnormal soun...

416 5-1. Essential information Emergency towing If a tow truck is not available, in an emergency your vehicle may be temporarily towed using a cable or chain secured to the emergency towing eyelet. This should only be attempted on hard surfaced roads for short distances at low speeds. A driver must ...

5 Wh en t ro uble ar ises 417 5-1. Essential information Installing towing eyelet Remove the eyelet cover using a flathead screwdriver. To protect the bodywork, place a rag between the screwdriver and the vehicle body, as shown in the illustration. Insert the towing eyelet into the hole and tighten ...

418 5-1. Essential information Towing with a sling-type truck Do not tow with a sling-type truck to prevent body damage. Towing with a wheel-lift type truck From the front (2WD models) Release the parking brake. From the front (4WD models) Use a towing dolly under the rear wheels.

5 Wh en t ro uble ar ises 419 5-1. Essential information From the rear Use a towing dolly under the front wheels. Using a flat bed truck If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45 ° . Do not overly tighten the tie downs or the vehicle may be damaged. ...

420 5-1. Essential information CAUTION ■ Caution while towing ● Use extreme caution when towing the vehicle. Avoid sudden starts or erratic driving maneuvers which place excessive stress on the emergency towing eyelet and the cables or chains. Always use caution for the surroundings and other vehicl...

5 Wh en t ro uble ar ises 421 5-1. Essential information NOTICE ■ To prevent body damage when towing with a sling-type truck Do not tow with a sling-type truck, either from the front or rear. ■ To prevent causing serious damage to the transmission and Active Torque Control 4WD system (4WD models) wh...

422 5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. ■ Visible symptoms ● Fluid leaks under the vehicle (Water dripping from the air conditioning a...

5 Wh en t ro uble ar ises 423 5-1. Essential information Fuel pump shut off system Follow the procedure below to restart the engine after the system is activated. Vehicles without smart key system Turn the engine switch to the “ACC” or “LOCK” position. Restart the engine. Vehicles with smart key sys...

424 5-1. Essential information Event data recorder In a crash or a near car crash event The SRS airbag sensor assembly contains the EDR. In a crash or a near car crash event, this device may record some or all of the follow-ing information: ● Engine speed ● Whether the brake pedal was applied or not...

5 Wh en t ro uble ar ises 425 5-1. Essential information Disclosure of the data Toyota will not disclose the data recorded in an EDR to a third party except when: ● An agreement from the vehicle's owner (or the leasing company for a leased vehicle) is obtained ● Officially requested by the police or...

426 5-2. Steps to take in an emergency If a warning light turns on or a warning buzzer sounds... Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous. The following warning indicates a possible problem in the brake sys-tem. Immediately stop the vehicle in a safe place and c...

5 Wh en t ro uble ar ises 427 5-2. Steps to take in an emergency Stop the vehicle immediately. The following warning indicates the possibility of damage to the vehi-cle that may lead to an accident. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Have the vehicle inspect...

428 5-2. Steps to take in an emergency (U.S.A.) (Canada) “ABS” warning light Indicates a malfunction in:• The ABS;• The brake assist system. Electric power steering warning light Indicates a malfunction in the EPS system. (Flashes) Cruise control indicator light Indicates a malfunction in the cruise...

5 Wh en t ro uble ar ises 429 5-2. Steps to take in an emergency Follow the correction procedures. After taking the specified steps to correct the suspected problem, check that the warning light turns off. Warning light Warning light/Details Correction procedure Open door warning light Indicates tha...

430 5-2. Steps to take in an emergency Automatic transmission fluid temperature warning light (if equipped) Indicates that the auto-matic transmission fluid temperature is too high. Stop the vehicle in a safe place and shift the shift lever to P. If the light does not go off, contact your Toyota dea...

5 Wh en t ro uble ar ises 431 5-2. Steps to take in an emergency *: Driver's and front passenger’s seat belt warning buzzers: The driver’s and front passenger’s seat belt warning buzzers sound to alert the driver and front passenger that his or her seat belt is not fastened. The buzzer sounds interm...

5 Wh en t ro uble ar ises 433 5-2. Steps to take in an emergency ■ If the malfunction indicator lamp comes on while driving First check the following: ● Is the fuel tank empty? If it is, fill the fuel tank immediately. ● Is the fuel tank cap loose? If it is, tighten it securely. The malfunction indi...

434 5-2. Steps to take in an emergency ■ If the tire pressure warning system is inoperative The tire pressure warning system will be disabled in the following condi-tions: (When the condition becomes normal, the system will work properly.) ● If tires not equipped with tire pressure warning valves an...

5 Wh en t ro uble ar ises 435 5-2. Steps to take in an emergency ■ Customization that can be configured at Toyota dealer The vehicle speed linked seat belt reminder buzzer can be disabled. (Customizable features → P. 500) However, Toyota recommends that the seat belt reminder buzzer be operational t...

436 5-2. Steps to take in an emergency CAUTION ■ Maintenance of the tires Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label (tire and...

5 Wh en t ro uble ar ises 437 5-2. Steps to take in an emergency CAUTION Your vehicle has also been equipped with a TPMS (tire pressure warning system) malfunction indicator to indicate when the system is not operat-ing properly. The TPMS (tire pressure warning system) malfunction indi-cator is comb...

438 5-2. Steps to take in an emergency If you have a flat tire (vehicles with standard tires) Remove the flat tire and replace it with the spare provided. ■ Before jacking up the vehicle ● Stop the vehicle on a hard, flat surface. ● Set the parking brake. ● Shift the shift lever to P. ● Stop the eng...

5 Wh en t ro uble ar ises 439 5-2. Steps to take in an emergency Taking out the jack Disengage the claws and remove the cover. Loosen Tighten Loosen and take out the jack. STEP 1 STEP 2

440 5-2. Steps to take in an emergency Taking out the tool bag Disengage the claws and remove the cover. Take out the tool bag. STEP 1 STEP 2

5 Wh en t ro uble ar ises 441 5-2. Steps to take in an emergency Taking out the spare tire (vehicles with the spare tire cover) Open the back door. Unlock the latch handle which is on the bot-tom of the spare tire cover. Close the back door. Remove the spare tire cover by holding the bottom and lift...

442 5-2. Steps to take in an emergency Taking out the spare tire (vehicles without the spare tire cover) Using the wheel nut wrench, loosen the hold-down nuts by turning them counterclockwise until they can be loosened by hand. Follow the order shown in the illustration. Remove all the wheel nuts an...

5 Wh en t ro uble ar ises 443 5-2. Steps to take in an emergency Replacing a flat tire Chock the tires. STEP 1 Flat tire Wheel chock posi- tions Front Left-hand side Behind the rear right-hand side tire Right-hand side Behind the rear left-hand side tire Rear Left-hand side In front of the front rig...

5 Wh en t ro uble ar ises 447 5-2. Steps to take in an emergency Remove all the wheel nuts and the tire. When resting the tire on the ground, place the tire so that the wheel design faces up to avoid scratching the wheel surface. Installing the tire Remove any dirt or foreign mat-ter from the wheel ...

450 5-2. Steps to take in an emergency Firmly tighten each nut two or three times in the order shown in the illustration. Tightening torque: 76 ft•lbf (103 N•m, 10.5 kgf•m) Reinstall the wheel ornament. 16-inch wheel 17-inch and 18-inch wheels STEP 4 STEP 5

5 Wh en t ro uble ar ises 451 5-2. Steps to take in an emergency Stowing the flat tire Remove any dirt or foreign matter from the disc wheel seat and the wheel contact surface. Vehicles with aluminum wheels and a steel wheel for the spare: Remove the plastic rings from the wheel nuts of the spare ti...

5 Wh en t ro uble ar ises 453 5-2. Steps to take in an emergency Stow the jack and all tools securely, and replace all the cov-ers. ■ When reinstalling the wheel ornament (vehicles with 16-inch wheels) ■ After completing the tire change (vehicles with a tire pressure warning system) The tire pressur...

454 5-2. Steps to take in an emergency CAUTION ■ Using the tire jack Improper use of the tire jack may lead to death or serious injuries due to the vehicle suddenly falling off the jack. ● Do not use the tire jack for any purpose other than replacing tires or installing and removing tire chains. ● O...

5 Wh en t ro uble ar ises 455 5-2. Steps to take in an emergency CAUTION ■ Replacing a flat tire Observe the following precautions to reduce the risk of death or serious injury: ● Do not try to remove the ornament by hand. Take due care in handling the ornament to avoid unexpected personal injury. ●...

456 5-2. Steps to take in an emergency NOTICE ■ Do not drive the vehicle with a flat tire Do not continue driving with a flat tire. Driving even a short distance with a flat tire can damage the tire and the wheel beyond repair. ■ When replacing the tires (vehicles with a tire pressure warning sys-te...

5 Wh en t ro uble ar ises 457 5-2. Steps to take in an emergency If you have a flat tire (vehicles with run-flat tires) ■ In some condition (such as at high temperatures) You cannot continue driving for up to 100 miles (160 km). ■ If you cannot distinguish between the standard tires and run-flat tir...

458 5-2. Steps to take in an emergency If the engine will not start If the engine will not start even though correct starting procedures are being followed ( → P. 143, 147) or releasing the steering lock, ( → P. 143, 147), consider each of the following points. ■ The engine will not start even when ...

5 Wh en t ro uble ar ises 459 5-2. Steps to take in an emergency If the shift lever cannot be shifted from P If the shift lever cannot be shifted with your foot on the brake, there may be a problem with the shift lock system (a system to prevent accidental operation of the shift lever). Have the veh...

460 5-2. Steps to take in an emergency If you lose your keys New genuine keys can be made by your Toyota dealer. For vehicles with the smart key system, bring the other key and the key number stamped on the key number plate. For vehicles without the smart key system, bring a master key and the key n...

5 Wh en t ro uble ar ises 461 5-2. Steps to take in an emergency If the electronic key does not operate properly (vehicles with smart key system) Locking and unlocking the doors with the mechanical key Using the mechanical key ( → P. 24) in order to perform the following operations: Locks all doors ...

5 Wh en t ro uble ar ises 463 5-2. Steps to take in an emergency If the battery is discharged The following procedures may be used to start the engine if the vehi- cle's battery is discharged. You can call your Toyota dealer or qualified repair shop. If you have a set of jumper (or booster) cables a...

464 5-2. Steps to take in an emergency ■ Starting the engine when the battery is discharged The engine cannot be started by push-starting. ■ To prevent battery discharge ● Turn off the headlights and the audio system while the engine is turned off. ● Turn off any unnecessary electrical components wh...

5 Wh en t ro uble ar ises 465 5-2. Steps to take in an emergency CAUTION ■ Avoiding battery fires or explosions Observe the following precautions to prevent accidentally igniting the flam-mable gas that may be emitted from the battery. ● Make sure the jumper cable is connected to the correct termina...

466 5-2. Steps to take in an emergency If your vehicle overheats If your engine overheats: Stop the vehicle in a safe place and turn off the air condi-tioning system. Check to see if steam is coming out from under the hood. If you see steam: Stop the engine. Carefully lift the hood after the steam s...

5 Wh en t ro uble ar ises 467 5-2. Steps to take in an emergency ■ Overheating If you observe the following, your vehicle may be overheating. ● The engine coolant temperature gauge enters the red zone or a loss of power is experienced. ● Steam is coming from under the hood. CAUTION ■ To prevent an a...

468 5-2. Steps to take in an emergency If the vehicle becomes stuck CAUTION ■ When attempting to free a stuck vehicle If you choose to rock the vehicle back and forth to free it, make sure the sur-rounding area is clear, to avoid striking other vehicles, objects or persons. The vehicle may also lung...

5 Wh en t ro uble ar ises 469 5-2. Steps to take in an emergency NOTICE ■ To avoid damaging the transmission and other components ● Avoid spinning the wheels and do not rev the engine. ● If the vehicle remains stuck after trying these procedures, the vehicle may require towing to be freed.

470 5-2. Steps to take in an emergency If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the following pro- cedure: Steadily step on the brake pedal with both feet and firmly depress ...

5 Wh en t ro uble ar ises 471 5-2. Steps to take in an emergency CAUTION ■ If the engine has to be turned off while driving ● Power assist for the brakes and steering wheel will be lost, making the brake pedal harder to depress and the steering wheel heavier to turn. Decelerate as much as possible b...

474 6-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions and weights Overall length 178.7 in. (4540 mm)* 1 180.7 in. (4590 mm)* 2 180.9 in. (4595 mm)* 3 181.1 in. (4600 mm)* 4 181.9 in. (4620 mm)* 5 Overall width Without over fender 71.5 in. (1815 mm)With over fender 73.0 in. (185...

477 6-1. Specifications 6 Vehicl e sp ecification s ■ Engine number The engine number is stamped on the engine block as shown. 2.5 L 4-cylinder (2AR-FE) engine 3.5 L V6 (2GR-FE) engine Engine Model 2AR-FE 2GR-FE Type 4-cylinder in line, 4-cycle, gasoline 6-cylinder V type, 4-cycle, gasoline Bore and...

478 6-1. Specifications Fuel Lubrication system ■ Engine oil selection “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: ILSAC multigrade engine oil Fuel type Unleaded gasol...

479 6-1. Specifications 6 Vehicl e sp ecification s Recommended viscosity: 2.5 L 4-cylinder (2AR-FE) engine SAE 5W-20 or 0W-20 SAE 5W-20 or 0W-20 engine oil may be used. However, SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. The 0W portion of the oil viscosity...

480 6-1. Specifications How to read oil container label: The ILSAC (International Lubricant Standardization and Approval Committee) Certification Mark is added to some oil containers to help you select the oil you should use. Cooling system *: With towing package Capacity (Reference) 2.5 L 4-cylinde...

481 6-1. Specifications 6 Vehicl e sp ecification s Ignition system Electrical system Rear differential (4WD models) Spark plug Make Gap 2.5 L 4-cylinder (2AR-FE) engine DENSO, SK16HR113.5 L V6 (2GR-FE) engine DENSO FK20HR11 0.043 in. (1.1 mm) NOTICE ■ Iridium-tipped spark plugs Use only iridium-tip...

482 6-1. Specifications Automatic transaxle Transfer (4WD models) Fluid capacity 4-speed models 8.6 qt. (8.1 L, 7.1 Imp. qt.)5-speed models 9.3 qt. (8.8 L, 7.7 Imp. qt.) Fluid type Toyota Genuine ATF WS NOTICE ■ Automatic transmission fluid type Using automatic transmission fluid other than “Toyota ...

483 6-1. Specifications 6 Vehicl e sp ecification s Brakes * 1 : Minimum pedal clearance when depressed with a force of 110 lbf (490 N, 50 kgf) while the engine is running * 2 : Parking brake pedal travel when depressed with a force of 45 lbf (200 N, 21 kgf) Steering Pedal clearance* 1 Without third...

484 6-1. Specifications Tires and wheels Type A * 1 : Steel wheels * 2 : Aluminum wheels Type B Tire size 215/70R16 99H, 225/65R17 101H, 235/55R18 99H Tire inflation pressure(Recommended cold tire inflation pressure) Front: 32 psi (220 kPa, 2.2 kgf/cm 2 or bar) Rear: 32 psi (220 kPa, 2.2 kgf/cm 2 or...

486 6-1. Specifications Fuel information ■ Fuel tank opening for unleaded gasoline To help prevent incorrect fueling, your Toyota has a fuel tank opening that only accommodates the special nozzle on unleaded fuel pumps. ■ If your engine knocks ● Consult your Toyota dealer. ● You may occasionally not...

487 6-1. Specifications 6 Vehicl e sp ecification s ■ Toyota recommends the use of gasoline containing detergent additives ● Toyota recommends the use of gasoline that contains detergent additives to avoid build-up of engine deposits. ● All gasoline sold in the US contains detergent additives to cle...

488 6-1. Specifications NOTICE ■ Notice on fuel quality ● Do not use improper fuels. If improper fuels are used the engine will be damaged. ● Do not use leaded gasoline. Leaded gasoline can cause damage to your vehicle's three-way catalytic converters causing the emission control system to malfuncti...

489 6-1. Specifications 6 Vehicl e sp ecification s Tire information Typical tire symbols Tire size ( → P. 491) DOT and Tire Identification Number (TIN) ( → P. 490) Uniform tire quality grading For details, see “Uniform tire quality grading” that follows. Location of treadwear indicators ( → P. 373)...

490 6-1. Specifications Typical DOT and tire identification number (TIN) DOT symbol* Tire Identification Number (TIN) Tire manufacturer's identifica-tion mark Tire size code Manufacturer's optional tire type code (3 or 4 letters) Manufacturing week Manufacturing year *: The DOT symbol certifies that...

491 6-1. Specifications 6 Vehicl e sp ecification s Tire size ■ Typical tire size information The illustration indicates typical tire size. Tire use (P = Passenger car, T = Temporary use) Section width (millimeters) Aspect ratio (tire height to section width) Tire construction code (R = Radial, D = ...

492 6-1. Specifications Tire section names Bead Sidewall Shoulder Tread Belt Inner liner Reinforcing rubber Carcass Rim lines Bead wires Chafer Uniform Tire Quality Grading This information has been prepared in accordance with regulations issued by the National Highway Traffic Safety Administration ...

493 6-1. Specifications 6 Vehicl e sp ecification s ■ Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a speci-fied government test course. For example, a tire graded 150 would wear one and a half (1 - 1/2) times as w...

494 6-1. Specifications Warning: The temperature grades for this tire are established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either sepa-rately or in combination, can cause heat buildup and possible tire fail-ure. Glossary of t...

499 6-1. Specifications 6 Vehicl e sp ecification s * :Table 1 ⎯ Occupant loading and distribution for vehicle normal load for various designated seating capacities Tire related term Meaning Tread That portion of a tire that comes into contact with the road Tread rib A tread section running circumfe...

500 6-2. Customization Customizable features Item Function Default setting Customized setting Smart key system (if equipped) ( → P. 26) Smart key system On Off Operation signal (Emergency flashers) On Off Operation signal (Buzzer) On Off Wireless remote con-trol ( → P. 38) Wireless remote control On...

503 6 Vehicl e sp ecification s 6-3. Initialization Items to initialize Item When to initialize Reference Power window After reconnecting or changing the battery P. 81 Moon roof (if equipped) After reconnecting or changing the battery P. 84 Engine oil mainte-nance data (U.S.A. only) After changing e...

507 7 For owners Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English. Utilisation correcte des ceintur...

508 Entretien et soin ATTENTION ■ Lorsque vous utilisez la ceinture de sécurité du siège central de ladeuxième rangée ■ Ceintures de sécurité Nettoyez avec un chiffon ou une éponge humectée d'eau savonneuse tiède.Profitez de l'occasion pour vérifier régulièrement que les ceintures ne sontpas effiloc...

509 7 For owners SRS airbag instructions for Canadian owners (in French) The following is a French explanation of SRS airbag instructions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instruc-tions in English. Sacs de sécurité gonflable...

510 Sacs de sécurité gonflables latéraux et rideau Sacs de sécurité gonflables latérauxParticipent à la protection du thorax des occupants des siègesavant. Sacs de sécurité gonflables rideauParticipent principalement à la protection de la tête desoccupants assis aux places extérieures.

511 7 For owners Composition du système de sacs de sécurité gonflables Sacs de sécurité gonflablesrideau Sacs de sécurité gonflableslatéraux Sac de sécurité gonflablepassager avant Capteurs de sacs desécurité gonflables latérauxet rideau Capteurs de sacs desécurité gonflables frontaux Contacteur de ...

513 7 For owners ATTENTION ■ Précautions à observer avec les sacs de sécurité gonflables SRS Respectez les précautions suivantes avec les sacs de sécurité gonflables. À défaut, des blessures graves, voire mortelles, pourraient s'ensuivre. ● Le conducteur et tous les passagers à bord du véhicule doiv...

518 ATTENTION ■ Modification et mise au rebut des éléments du système de sacs desécurité gonflables SRS Consultez impérativement votre concessionnaire Toyota si vous avez besoind'intervenir sur votre véhicule ou de procéder à l'une des modificationssuivantes. Les sacs de sécurité gonflables SRS risq...

522 Alphabetical index Alphabetical index A/C ..................................... 226, 232ABS ........................................... 184Active head restraints ...............53Air conditioning filter...............386Air conditioning system Air conditioning filter .............. 386Automatic ...

536 GAS STATION INFORMATION Auxiliary catch lever P. 354 Fuel filler door P. 88 Hood release lever P. 354 Fuel filler door opener P. 88 Tire inflation pressure P. 484 Fuel tank capacity (Reference) 15.9 gal. (60 L, 13.2 Imp. gal.) Fuel type Unleaded gasoline with an Octane Rating of 87 (Research Oct...