Toyota 2011 Corolla- Manuals

1 2 3 4 5 6 7 5 5-1. Essential information Emergency flashers ............ 414If your vehicle needs to be towed ........................... 415 If you think something is wrong ................................ 420 Fuel pump shut off system .............................. 421 Event data recorder .........

15 For your information Main Owner’s Manual Please note that this manual covers all models and all equipment, includingoptions. Therefore, you may find some explanations for equipment notinstalled on your vehicle. All specifications provided in this manual are current at the time of printing.However...

17 CAUTION ■ General precautions while driving Driving under the influence: Never drive your vehicle when under the influ-ence of alcohol or drugs that have impaired your ability to operate your vehi-cle. Alcohol and certain drugs delay reaction time, impair judgment andreduce coordination, which co...

18 Symbols used throughout this manual Cautions & Notices Symbols used in illustrations CAUTION This is a warning against anything which may cause death or injury to people ifthe warning is ignored. You are informed about what you must or must not doin order to reduce the risk of injury to yours...

TABLE OF CONTENTS 1 1 Before driving Adjusting and operating features such as door locks, mirrors, and steering column. 2 When driving Driving, stopping and safe-driving information. 3 Interior fea- tures Air conditioning and audio systems, as well as other in- terior features for a comfortable driv...

6 Headlights (low beam) P. 157 Pictorial index Exterior Front fog lights ∗ P. 159 Front turn signal and parking lights P. 144, 157 Outside rear view mirrors P. 67 Front side marker lights P. 157 Headlights (high beam) and daytime running lights P. 157, 158 Moon roof ∗ P. 71 Hood P. 351 Windshield wi...

8 Glove box P. 314 Power window switches ∗ P. 69 SRS front passenger airbag P. 85 SRS driver airbag P. 85 Interior Pictorial index Floor mat P. 329 Head restraints P. 54 Seat belts P. 56 Auxiliary boxes P. 318 Parking brake lever P. 145 Shift lever P. 137, 143 Front seats P. 49 Cup holders P. 316 Cu...

10 Gauges and meters Multi-information display P. 147P. 154 Tilt and telescopic steering control lever P. 64 Pictorial index Trunk opener P. 45 Headlight switch Turn signal lever Fog light switch ∗ P. 157P. 144P. 159 Instrument panel Audio system P. 206 Windshield wiper and washer switch P. 160 Hood...

12 B Outside rear view mirror switches P. 67 Auxiliary boxes P. 318 Pictorial index Instrument panel VSC/TRAC off switch P. 166

13 C Cruise control switch ∗ P. 162 Talk switch ∗ P. 280 Engine (ignition) switch(vehicles without smart key system) ∗ P. 133 Engine (ignition) switch(vehicles with smart key system) ∗ P. 129 Audio remote control switches ∗ P. 255 Telephone switch ∗ P. 280 ∗ : If equipped Type A

14 C Talk switch ∗ P. 280 Pictorial index Instrument panel Type B ∗ : If equipped Telephone switch ∗ P. 280 Cruise control switch ∗ P. 162 Engine (ignition) switch P. 133 Audio remote control switches P. 255

QUICK REFERENCE GUIDE COROLL A 2 0 1 1 414868M1.indd 1 414868M1.indd 1 11/17/10 6:51 PM 11/17/10 6:51 PM

2011 Corolla ! A word about safe vehicle operations This Quick Reference Guide is a summary of basic vehicle operations. It contains brief descriptions of fundamentaloperations so you can locate and use the vehicle’s mainequipment quickly and easily. The Quick Reference Guide is not intended as a su...

1 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Engine maintenance 7 Fuel tank door release and cap 6 Hood release 7 Indicator symbols 5 Instrument cluster 4 Instrument panel 2-3 Keyless entry 1 6 Air Conditioning/Heating 14 Audio 12-13 Auto lock/unlock 2 9 Automatic Transmission 8 ...

2 OVERVIEW Instrument panel Steering wheel audio controls*Voice command button*Telephone controls*Ignition switchCruise control*VSC/TRAC OFF switchPower outside rearview mirror controlsAuxiliary storageHeadlight, turn signal and front fog light* controlsWiper and washer controlsEmergency flasher but...

4 OVERVIEW Instrument cluster Service indicator and reminder TachometerSpeedometerFuel gaugeTrip meter reset/Instrument panel light controlOdometer and two trip metersAutomatic Transmission shift range display (if equipped)Multi-information displayDisplay buttonEngine coolant temperature Type A Type...

5 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Indicator symbols Charging system warning 1 Brake system warning 1 AIR BAG ON and AIR BAG OFF indicator Anti-lock Brake System warning 1 Headlight high beam indicator Turn signal indicator Slip indicator 1 Cruise control/Cruise control...

6 OVERVIEW Keyless entry (if equipped) Push Push ONCE: Driver door TWICE: All doors Locking operation Unlocking operation Panic button Push and hold NOTE: If a door is not opened within 60 seconds of unlocking, all doorswill relock for safety. Trunk lid operation Push and hold Fuel tank door release...

8 FEATURES/OPERATIONS Automatic Transmission (if equipped) * The ignition switch must be “ON” and the brake pedal depressed to shift from Park. Shift the shift lever to “S” position from “D” position. + : Upshift (push and release) - : Downshift (pull and release) Downshifting increases power going ...

9 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Auto lock/unlock (if equipped) Automatic door locks can be programmed to operate in two differentmodes, or turned OFF. - Doors lock when shifting from Park. -Doors lock when the vehicle speed is approximately 12 mph or higher. - Doors ...

10 FEATURES/OPERATIONS Seats-Head restraints Front Rear Lock release button Lock release button Windshield wipers & washers Interval wipe Single wipe Slow Fast Pull to wash and wipe Windows-Power (if equipped) Up Down Driver side Window lock switch Automatic operation (driver side only) Push the...

11 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Lights & turn signals Turn signals Headlights High beam flasher Low beam Front fog lights (if equipped) Daytime Running Light system (DRL) Headlights turn on automatically upon starting engine. The brightness of the headlights wil...

12 FEATURES/OPERATIONS Audio Eject CD Push to turnON/OFF Seek station/CD track select Station/CDtrack scan Mode Preset buttons - functions in othermodes indicated above number View CD text Push to skipup/downfolder andradio categorytype Push and turnto adjust tone& balance Type 2 Type 1 Push to ...

13 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Radio To preset stations Tune in the desired station and hold down a preset button (from to or one of ) until you hear a beep. Push desired preset button (from to or one of ) to select. To scan stations Push and hold “SCAN” to scan pr...

14 FEATURES/OPERATIONS Air Conditioning/Heating Airflow ventUse “ ” or “ ” mode to reduce window fogging (system automatically switches to fresh air mode).Fan speed Temperature selectorFor quick cooling, turn to MAX A/C position and selectrecirculated air mode (“ ” indicator ON). Air Conditioning ON...

15 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Cruise control (if equipped) 1 The set speed may also be cancelled by depressing the brake pedal. 2 The set speed may be resumed once vehicle speed exceeds 25 mph. Turning system ON/OFF Functions System ON/OFF Increase speed Set/Decre...

16 FEATURES/OPERATIONS Bluetooth ® technology allows dialing or receipt of calls without taking hands from the steering wheel or using a cable to connect the compatibletelephone and the system. Refer to “Hands-free phone system (for cellular phone),” Section 3-4 inthe Owner’s Manual , or go to Toyot...

17 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES NOTE: Do not attempt to adjust while the vehicle is in motion. Tilt and telescopic steering wheel Lock release lever Angle Length Hold wheel, push lever down,set angle and length, andreturn lever. Door locks-Power (if equipped) Lock U...

18 FEATURES/OPERATIONS Cup holders Front Auxiliary storage Instrument panel Overhead console (if equipped) Type A Type B (if equipped) Type C Rear Pull Pull Push Pull Light control-Instrument panel Brightnesscontrol - + 414868M2.qxd:414868M2 11/18/10 9:35 AM Page 18

19 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES If belt is fully extended, then retracted even slightly, it cannot be re-extended beyond that point, unless fully retracted again. This featureis used to help hold child restraint systems securely. To find more information about seat ...

20 System reset initialization 1. Push and hold “ SET” button until the indicator blinks three times. 2. Wait a few minutes to allow initialization to complete. Trunk-Internal release Pull up Moving the lever to “LOCK” will allow the door to be opened only fromthe outside. Rear door Doors-Child safe...

21 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Spare tire & tools Tool location Removing the spare tire (1) Remove the luggage floor cover.(2) Remove the tool tray.(3) Loosen the center fastener that secures the spare tire. Refer to the Owner’s Manual for tire changing and jac...

20 1-1. Key information Keys The following keys are provided with the vehicle. Vehicles with smart key system Electronic keys • Operating the smart key system ( → P. 23) • Operating the wireless remote control function ( → P. 34) Mechanical keysKey number plate Vehicles without smart key system (typ...

21 1-1. Key information 1 Before driving Using the mechanical key (vehicles with smart key system) Take out the mechanical key. After using the mechanical key,store it in the electronic key. Carrythe mechanical key together withthe electronic key. If the electronickey battery is depleted or theentry...

22 1-1. Key information NOTICE ■ To prevent key damage ● Do not subject the keys to strong shocks, expose them to high tempera-tures by placing them in direct sunlight, or get them wet. ● Do not expose the keys to electromagnetic materials or attach any mate-rial that blocks electromagnetic waves to...

23 1 Before driving 1-2. Opening, closing and locking the doors and trunk Smart key system ∗ The following operations can be performed simply by carrying theelectronic key on your person, for example in your pocket.(The driver should always carry the electronic key.) Locks and unlocks the doors ( → ...

25 1-2. Opening, closing and locking the doors and trunk 1 Before driving Antenna location and effective range ■ Antenna location Antennas outside the cabinAntenna outside the trunkAntenna inside the trunkAntennas inside the cabin

26 1-2. Opening, closing and locking the doors and trunk ■ Effective range (areas within which the electronic key isdetected) When locking or unlockingthe doors The system can be operatedwhen the electronic key iswithin about 2.3 ft. (0.7 m) ofeither of the outside frontdoor handles. (Only thedoors ...

27 1-2. Opening, closing and locking the doors and trunk 1 Before driving ■ Operation signals A buzzer sounds and the emergency flashers flash to indicate that the doorshave been locked/unlocked. (Locked: Once; Unlocked: Twice) ■ Conditions affecting operation The smart key system uses weak radio wa...

29 1-2. Opening, closing and locking the doors and trunk 1 Before driving ■ Electronic key battery depletion ● The standard battery life is 1 to 2 years. ● The battery becomes depleted even if the electronic key is not usedbecause the key always transmits radio waves. If the smart key systemor the w...

32 1-2. Opening, closing and locking the doors and trunk ■ If the smart key system does not operate properly ● Locking and unlocking the doors and trunk: Use the mechanical key.( → P. 452) ● Starting the engine: → P. 453 ■ When the electronic key battery is fully depleted → P. 386 ■ Customization th...

33 1-2. Opening, closing and locking the doors and trunk 1 Before driving CAUTION ■ Caution regarding interference with electronic devices ● People with implanted pacemakers or cardiac defibrillators should keepaway from the smart key system antennas. ( → P. 25) The radio waves may affect the operat...

34 1-2. Opening, closing and locking the doors and trunk Wireless remote control ∗ The wireless remote control can be used to lock and unlock the vehi-cle from outside the vehicle. Vehicles with smart key system Locks all doorsUnlocks doors Pressing the button unlocksthe driver’s door. Pressing theb...

35 1-2. Opening, closing and locking the doors and trunk 1 Before driving ■ Operation signals Doors: A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked:Twice) Trunk: A buzzer sounds to indicate that the trunk has been unlock...

37 1-2. Opening, closing and locking the doors and trunk 1 Before driving ■ Customization that can be configured at Toyota dealer Settings (e.g. trunk unlocking function) can be changed. (Customizable features → P. 495) ■ Certification for wireless remote control (vehicles with smart key sys-tem) Fo...

39 1 1-2. Opening, closing and locking the doors and trunk Before driving Doors The vehicle can be locked and unlocked using the entry function,wireless remote control, key or door lock switch. ■ Entry function (vehicles with smart key system) → P. 23 ■ Wireless remote control (if equipped) → P. 34 ...

41 1-2. Opening, closing and locking the doors and trunk 1 Before driving Automatic door locking and unlocking systems (vehicles withpower door lock system) The following functions can be set or cancelled: * 1 : Vehicles with an automatic transmission only * 2 : Vehicles with smart key system Functi...

42 1-2. Opening, closing and locking the doors and trunk ■ Setting and canceling the functions To switch between set and canceled, follow the procedure below: Vehicles with smart key system: Close all the doors andswitch the “ENGINE START STOP” switch to IGNITION ONmode. (Perform step 2 within 10 se...

43 1-2. Opening, closing and locking the doors and trunk 1 Before driving * 1 : Vehicles with an automatic transmission only * 2 : Vehicles with smart key system When the setting or canceling operation is complete, all doors arelocked and then unlocked. Function Shift lever position Driver’s door lo...

44 1-2. Opening, closing and locking the doors and trunk CAUTION ■ To prevent an accident Observe the following precautions while driving the vehicle.Failing to do so may result in a door opening and an occupant falling out,resulting in death or serious injury. ● Always use a seat belt. ● Always loc...

45 1 1-2. Opening, closing and locking the doors and trunk Before driving Trunk The trunk can be opened using the entry function, wireless remotecontrol, key or trunk opener. ■ Opening the trunk from inside the vehicle Release the trunk lid. ■ Opening the trunk from outside the vehicle Entry functio...

46 1-2. Opening, closing and locking the doors and trunk Trunk opener cancelling system To protect luggage stored in the trunk against theft, do the followingprocedure. Turn the master key (vehicleswithout smart key system) ormechanical key (vehicles withsmart key system) counterclock-wise to lock t...

47 1-2. Opening, closing and locking the doors and trunk 1 Before driving CAUTION ■ Caution while driving ● Before driving the vehicle, make sure that the trunk lid is fully closed. If thetrunk lid is not fully closed, it may open unexpectedly while driving, caus-ing an accident. ● Keep the trunk li...

48 1-2. Opening, closing and locking the doors and trunk CAUTION ■ Using the trunk Observe the following precautions.Failure to do so may cause parts of the body to be caught, resulting in seri-ous injury. ● Remove any heavy loads, such as snow and ice, from the trunk lid beforeopening it. Failure t...

49 1 Before driving 1-3. Adjustable components (seats, mirrors, steering wheel) Front seats Power seat (driver's side only) Seat position switchSeatback angle switchSeat cushion (front) angle switchVertical height adjustment switchLumbar support switch

50 1-3. Adjustable components (seats, mirrors, steering wheel) Active head restraints When the occupant’s backpresses against the seatbackduring a rear-end collision, thehead restraint moves slightly for-ward to help reduce the risk ofwhiplash on the seat occupant. Manual seat Seat position adjustme...

51 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving ■ Active head restraints Even small forces applied to the seatback may cause the head restraint tomove. Pushing up a locked head restraint forcibly may appear the headrestraint inner structure. These do not indicate prob...

52 1-3. Adjustable components (seats, mirrors, steering wheel) Rear seats ■ Before folding down the rear seat Stow the rear outside seat beltbuckles and move the rearcenter seat belt buckle asshown. ■ Folding down rear seatbacks Pull the seatback lever in thetrunk for the seatback youwish to fold do...

53 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving CAUTION ■ After returning the seatback to the upright position Observe the following precautions. Failure to do so may result in death orserious injury. ● Make sure the seatback is securely locked by pressing forward and...

54 1-3. Adjustable components (seats, mirrors, steering wheel) Head restraints ■ Removing the head restraints Head restraints are provided for all seats. Front seats Up Pull the head restraints up. Down Push the head restraint downwhile pushing the lock releasebutton. Rear seats Up Pull the head res...

55 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving ■ Installing the head restraints ■ Adjusting the height of the head restraints ■ Adjusting the rear center seat head restraint Always raise the head restraint one level from the stowed position whenusing. CAUTION ■ Head ...

56 1-3. Adjustable components (seats, mirrors, steering wheel) Seat belts Make sure that all occupants are wearing their seat belts before driv-ing the vehicle. ■ Correct use of the seat belts ● Extend the shoulder belt sothat it comes fully over theshoulder, but does notcome into contact with thene...

57 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving Seat belt comfort guide (outside rear seats) If the shoulder belt sits close to a person's neck, use the seat beltcomfort guide. Pull out the comfort guide fromthe pocket. Slide the belt past the slot of theguide. The el...

59 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving ■ Emergency locking retractor (ELR) The retractor will lock the belt during a sudden stop or on impact. It may alsolock if you lean forward too quickly. A slow, easy motion will allow the belt toextend so that you can mo...

61 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving CAUTION Observe the following precautions to reduce the risk of injury in the event ofsudden braking, sudden swerving or an accident.Failing to do so may cause death or severe injury. ■ Wearing a seat belt ● Ensure that ...

62 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ Child restraint lock function belt precaution Do not allow children to play with the child restraint lock function belt. If thebelt becomes twisted around a child's neck, it will not be possible to pull thebelt out leading to c...

63 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving CAUTION ■ Using a seat belt comfort guide ● Make sure the belt is not twisted and that it lies flat. The elastic cord mustbe behind the belt and the guide must be on the front. ● To reduce the chance of injury in case of...

64 1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel CAUTION ■ Caution while driving Do not adjust the steering wheel while driving.Doing so may cause the driver to mishandle the vehicle and cause an acci-dent, resulting in death or serious injury. ■ After adjusting the stee...

65 1 1-3. Adjustable components (seats, mirrors, steering wheel) Before driving Anti-glare inside rear view mirror Glare from the headlights of vehicles behind can be reduced byusing the following functions. Manual anti-glare inside rear view mirror Normal positionAnti-glare position Auto anti-glare...

66 1-3. Adjustable components (seats, mirrors, steering wheel) Adjusting the height of rear view mirror Adjust the height of the rear viewmirror by moving it up and down. ■ To prevent sensor error (vehicles with auto anti-glare inside rear viewmirror) CAUTION ■ Caution while driving Do not adjust th...

67 1 1-3. Adjustable components (seats, mirrors, steering wheel) Before driving Outside rear view mirrors Folding back the mirrors Push backward to fold the mir-rors. Mirror angle can be adjusted using the switch. Select a mirror to adjust. LeftRight Adjust the mirror. UpRightDownLeft STEP 1 STEP 2

68 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Mirror angle can be adjusted when Vehicles with smart key system The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ONmode. Vehicles without smart key system The engine switch is in the “ACC” or “ON” position. ■ When the mirror...

69 1 Before driving 1-4. Opening and closing the windows Power windows ∗ Lock switch Press the switch down to lockthe passenger window switches. Use this switch to prevent chil-dren from accidentally opening orclosing a passenger window. The power windows can be opened and closed using the following...

70 1-4. Opening and closing the windows ■ The power windows can be operated when Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. Vehicles without smart key system The engine switch is in the “ON” position. ■ Operating the power windows after turning the engine O...

71 1 1-4. Opening and closing the windows Before driving Moon roof ∗ Use the overhead switches to open, close, and tilt the moon roof upand down. ■ Opening and closing Open* The moon roof stops slightlybefore the fully opened posi-tion.Push the switch again to fullyopen. Close* *: Push the switch in...

73 1-4. Opening and closing the windows 1 Before driving ■ When the moon roof does not close normally Perform the following procedure: ● If the moon roof closes but then re-opens slightly Stop the vehicle. Press and hold the “CLOSE” switch.* 1 The moon roof will close, reopen and pause for approxima...

74 1-4. Opening and closing the windows CAUTION ■ Opening the moon roof Observe the following precautions.Failing to do so may cause death or serious injury. ● Do not allow any passengers to put their hands or heads outside the vehi-cle while it is moving. ● Do not sit on top of the moon roof. ■ Clo...

75 1 Before driving 1-5. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap. ■ Before refueling the vehicle Vehicles with smart key system Turn the “ENGINE START STOP” switch OFF and ensure thatall the doors and windows are closed. Vehicles without smart key sy...

76 1-5. Refueling Closing the fuel tank cap When replacing the fuel tankcap, turn it until a clicking soundis heard. After releasing your hand, the capwill turn slightly to the oppositedirection. Hang the fuel tank cap on theback of the fuel filler door. STEP 3 ■ Fuel type Unleaded gasoline (Octane ...

77 1-5. Refueling 1 Before driving CAUTION ■ Refueling the vehicle Observe the following precautions while refueling the vehicle. Failure to do so may result in death or serious injury. ● Touch the vehicle or some other metal surface to discharge any staticelectricity.Sparks resulting from dischargi...

78 1-5. Refueling NOTICE ■ Refueling Do not spill fuel during refueling.Doing so may damage the vehicle, such as causing the exhaust systems tooperate abnormally or damaging fuel system components or the vehicle'spainted surface.

79 1 Before driving 1-6. Theft deterrent system Engine immobilizer system The vehicle's keys have built-in transponder chips that prevent theengine from starting if the key has not been previously registered inthe vehicle's on-board computer.Never leave the keys inside the vehicle when you leave the...

80 1-6. Theft deterrent system ■ System maintenance The vehicle has a maintenance-free type engine immobilizer system. ■ Conditions that may cause the system to malfunction ● If the key is in contact with a metallic object ● If the key is in close proximity to or touching a key to the security syste...

81 1-6. Theft deterrent system 1 Before driving NOTICE ■ To ensure the system operates correctly Do not modify or remove the system. If modified or removed, the properoperation of the system cannot be guaranteed.

83 1 Before driving 1-7. Safety information Correct driving posture Drive in a good posture as follows: Sit upright and well back inthe seat. ( → P. 49) Adjust the position of theseat forward or backward toensure the pedals can bereached and easilydepressed to the extentrequired. ( → P. 49) Adjust t...

84 1-7. Safety information CAUTION ■ While driving ● Do not adjust the position of the driver's seat while driving.Doing so could cause the driver to lose control of the vehicle. ● Do not place a cushion between the driver or passenger and the seatback.A cushion may prevent correct posture from bein...

85 1 1-7. Safety information Before driving SRS airbags The SRS airbags inflate when the vehicle is subjected to certaintypes of severe impacts that may cause significant injury to theoccupants. They work together with the seat belts to help reduce therisk of death or serious injury. Front airbagsDr...

86 1-7. Safety information Airbag system components Your vehicle is equipped with ADVANCED AIRBAGS designed basedon US motor vehicle safety standards (FMVSS208). The airbag sys-tem controls airbag deployment power for the driver and front pas-senger. The driver airbag system consists of the driver s...

88 1-7. Safety information ■ If the SRS airbags deploy (inflate) ● Bruising and slight abrasions may result from contact with a deploying(inflating) SRS airbag. ● A loud noise and white powder will be emitted. ● Parts of the airbag module (steering wheel hub, airbag cover and inflator)as well as the...

91 1-7. Safety information 1 Before driving ■ When to contact your Toyota dealer In the following cases, contact your Toyota dealer as soon as possible. ● Any of the SRS airbags have been inflated. ● The front of the vehicle is damaged ordeformed, or was involved in an acci-dent that was not severe ...

92 1-7. Safety information CAUTION ■ SRS airbag precautions Observe the following precautions regarding the airbags. Failure to do so may cause death or serious injury. ● The driver and all passengers in the vehicle must wear their seat beltsproperly.The SRS airbags are supplemental devices to be us...

95 1-7. Safety information 1 Before driving CAUTION ■ SRS airbag precautions ● Do not use seat accessories which cover the parts where the SRS sideairbags inflate as they may interfere with inflation of the airbags. ● Do not strike or apply significant levels of force to the area of the SRS air-bag ...

96 1-7. Safety information CAUTION ■ SRS airbag precautions ● If breathing becomes difficult after the SRS airbag has deployed, open adoor or window to allow fresh air in, or leave the vehicle if it is safe to doso. Wash off any residue as soon as possible to prevent skin irritation. ● If the areas ...

97 1 1-7. Safety information Before driving Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classifica-tion system. This system detects the conditions of the front passen-ger seat and activates or deactivates the devices for the frontpassenger....

99 1-7. Safety information 1 Before driving ■ Unoccupied ■ There is a malfunction in the system *1 : The system judges a person of adult size as an adult. When a smaller adult sits in the front passenger seat, the system may rec-ognize him/her as a child depending on his/her physique and pos-ture. *...

100 1-7. Safety information *4 : Never install a rear-facing child restraint system on the front pas- senger seat. A forward-facing child restraint system should onlybe installed on the front passenger seat when it is unavoidable.( → P. 102) *5 : In case the indicator is not illuminated, consult thi...

101 1-7. Safety information 1 Before driving CAUTION ■ Front passenger occupant classification system precautions ● Do not recline the front passenger seatback so far that it touches a rearseat. This may cause the “PASSENGER AIR BAG OFF” indicator light tobe illuminated, which indicates that the pas...

102 1-7. Safety information Child restraint systems Points to remember Studies have shown that installing a child restraint system on a rearseat is much safer than installing one to the front passenger seat. ● Choose a child restraint system that suits your vehicle and isappropriate to the age and s...

103 1-7. Safety information 1 Before driving Types of child restraints Child restraint systems are classified into the following 3 typesaccording to the age and size of the child. Rear facing ⎯ Infant seat/convertible seat Forward facing ⎯ Convertible seat Booster seat

104 1-7. Safety information ■ Selecting an appropriate child restraint system ● Use a child restraint system appropriate for the child until the childbecomes large enough to properly wear the vehicle’s seat belt. ● If a child is too large for a child restraint system, sit the child on a rearseat and...

106 1-7. Safety information Installing child restraints Follow the child restraint system manufacturer's instructions. Firmlysecure child restraints to the rear seats using the LATCH anchors ora seat belt. Attach the top tether strap when installing a childrestraint. The lap/shoulder belt can be use...

107 1-7. Safety information 1 Before driving Installation with LATCH system Rear right seat only: Slide therear center seat belt to the sideto prevent it from getting pinchedin the lower anchorage. Type A Widen the gap betweenthe seat cushion andseatback slightly.Latch the hooks of thelower straps o...

111 1-7. Safety information 1 Before driving While pushing the child seat intothe rear seat, allow the shoulderbelt to retract until the child seatis securely in place. After the shoulder belt hasretracted to a point where there isno slack in the belt, pull the belt tocheck that it cannot be extende...

112 1-7. Safety information Removing a child restraint installed with a seat belt Push the release button and fullyretract the seat belt.

113 1-7. Safety information 1 Before driving Child restraint systems with a top tether strap Secure the child restraint using a seat belt or the loweranchors, and do the following. Outside Remove the head restraint. Center Lock the head restraint in placeat the lowest position. Open the anchor brack...

114 1-7. Safety information Outside only: Replace the headrestraint. STEP 3 ■ Laws and regulations pertaining to anchorages The LATCH system conforms to FMVSS225 or CMVSS210.2.Child restraint systems conforming to FMVSS213 or CMVSS213 specifica-tions can be used.This vehicle is designed to conform t...

115 1-7. Safety information 1 Before driving CAUTION ■ When installing a booster seat Do not fully extend the shoulder belt to prevent the belt from going to ALRlock mode: ( → P. 59) ALR mode causes the belt to tighten only which could cause injury or dis-comfort to the child. ■ When installing a ch...

116 1-7. Safety information CAUTION ■ When installing a child restraint system ● When a booster seat is installed, always ensure that the shoulder belt ispositioned across the center of the child's shoulder. The belt should bekept away from the child's neck, but not so that it could fall off the chi...

118 2-1. Driving procedures Driving the vehicle The following procedures should be observed to ensure safe driv-ing. ■ Starting the engine → P. 129, 133 ■ Driving Automatic transmission With the brake pedal depressed, shift the shift lever to D. ( → P. 137) Release the parking brake. ( → P. 145) Gra...

119 2-1. Driving procedures 2 When drivin g ■ Parking the vehicle Automatic transmission With the shift lever in D, depress the brake pedal.Set the parking brake. ( → P. 145) Shift the shift lever to P. ( → P. 137) When parking on a hill, if necessary, block the wheels. Vehicles with smart key syste...

120 2-1. Driving procedures Starting on a steep uphill Automatic transmission Firmly set the parking brake and shift the shift lever to D.Gently depress the accelerator pedal.Release the parking brake. Manual transmission With the parking brake firmly set and the clutch pedal fullydepressed, shift t...

121 2-1. Driving procedures 2 When drivin g ■ Drum-in-disc type parking brake system (2.4 L 4-cylinder [2AZ-FE]engine) Your vehicle has a drum-in-disc type parking brake system. This type ofbrake system needs bedding-down of the brake shoes periodically or when-ever the parking brake shoes and/or dr...

122 2-1. Driving procedures CAUTION ■ When starting the vehicle (vehicles with an automatic transmission) Always keep your foot on the brake pedal while stopped with the engine run-ning. This prevents the vehicle from creeping. ■ When driving the vehicle ● Do not drive if you are unfamiliar with the...

124 2-1. Driving procedures CAUTION ■ When driving on slippery road surfaces ● Sudden braking, acceleration and steering may cause tire slippage andreduce your ability to control the vehicle, resulting in an accident. ● Sudden changes in engine speed, such as engine braking caused by up-shifting or ...

125 2-1. Driving procedures 2 When drivin g CAUTION ■ When the vehicle is parked ● Do not leave glasses, cigarette lighters, spray cans, or soft drink cans inthe vehicle when it is in the sun. Doing so may result in the following. • Gas may leak from a cigarette lighter or spray can, and may lead to...

126 2-1. Driving procedures CAUTION ■ When taking a nap in the vehicle Always turn the engine off. Otherwise, you may accidentally move the shiftlever or depress the accelerator pedal, which could cause an accident or firedue to engine overheating. Additionally, if the vehicle is parked in a poorlyv...

127 2-1. Driving procedures 2 When drivin g NOTICE ■ When driving the vehicle ● Do not depress the accelerator and brake pedals at the same time duringdriving. If the brake pedal is depressed while driving with the acceleratorpedal depressed, driving torque may be restrained. Manual transmission ● D...

128 2-1. Driving procedures NOTICE ■ If you hear a squealing or scraping noise (brake pad wear limit indica-tors) Have the brake pads checked and replaced by your Toyota dealer as soonas possible. Rotor damage can result if the pads are not replaced when needed. It is dangerous to drive the vehicle ...

130 2-1. Driving procedures ■ Changing “ENGINE START STOP” switch mode Modes can be changed by pressing the “ENGINE STARTSTOP” switch with the brake pedal released. (The modechanges each time the switch is pressed.) OFF* The emergency flashers canbe used. ACCESSORY mode Some electrical componentssuc...

131 2-1. Driving procedures 2 When drivin g ■ Steering lock release ■ If the engine does not start The engine immobilizer system may not have been deactivated. ( → P. 79) ■ When the “ENGINE START STOP” switch indicator flashes in amber The system may be malfunctioning. Have the vehicle inspected by ...

132 2-1. Driving procedures CAUTION ■ When starting the engine Always start the engine while sitting in the driver's seat. Do not depress theaccelerator pedal while starting the engine under any circumstances.Doing so may cause an accident resulting in death or serious injury. ■ Stopping the engine ...

134 2-1. Driving procedures ■ Turning the engine switch from “ACC” to “LOCK” ■ Changing engine switch position “LOCK” The steering wheel is lockedand the key can be removed.(Vehicles with an automatictransmission: The key can beremoved only when the shiftlever is in P.) “ACC” Some electrical compone...

135 2-1. Driving procedures 2 When drivin g ■ Steering lock release ■ If the engine does not start The engine immobilizer system may not have been deactivated. ( → P. 79) ■ Key reminder buzzer A buzzer sounds if the driver’s door is opened while the engine switch is inthe “LOCK” position to remind y...

137 2-1. Driving procedures 2 When drivin g Automatic transmission ∗ Select a shift position appropriate for the driving conditions. ■ Shifting the shift lever Standard type Vehicles with smart key system: While the “ENGINESTART STOP” switch is in IGNITION ON mode, depressthe brake pedal and move th...

138 2-1. Driving procedures Multi-mode type While the engine switch is in the “ON” position, depress the brake pedal and move the shift lever.

139 2-1. Driving procedures 2 When drivin g ■ Shift position uses * 1 : Shifting to the D position allows the system to select a gear suitable for driving conditions. Setting the shift lever to the D position is recom-mended for normal driving. * 2 : Selecting shift ranges using S mode restricts the...

140 2-1. Driving procedures Changing shift ranges in S mode (multi-mode type) Shift the shift lever to the S position and operate the shift lever. UpshiftingDownshifting The initial shift range in S mode is set automatically to 5 or 4 accord-ing to vehicle speed. However, the initial shift range may...

141 2-1. Driving procedures 2 When drivin g ■ Shift ranges and their functions A lower shift range will provide greater engine braking forces than ahigher shift range. ■ Downshifting restrictions (standard type) The shift lever cannot be downshifted if the following speeds are exceeded. mph (km/h) ■...

142 2-1. Driving procedures ■ When driving with the cruise control system (if equipped) Standard type Engine braking will not occur when downshifting from D to 3. ( → P. 162) Multi-mode type Engine braking will not occur in S mode, even when downshifting to 4. ( → P. 162) ■ If the shift lever cannot...

143 2-1. Driving procedures 2 When drivin g Manual transmission ∗ ■ Maximum allowable speeds Observe the following maximum allowable speeds in each gear when maxi-mum acceleration is necessary. 2.4 L 4-cylinder (2AZ-FE) engine mph (km/h) 1.8 L 4-cylinder (2ZR-FE) engine mph (km/h) ■ Shifting the shi...

144 2-1. Driving procedures Turn signal lever ■ Turn signals can be operated when Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. Vehicles without smart key system The engine switch is in the “ON” position. ■ If the indicators flash faster than usual Check that ...

145 2-1. Driving procedures 2 When drivin g Parking brake ■ Usage in winter time See “Winter driving tips” for parking brake usage in winter time. ( → P. 174) NOTICE ■ Before driving Fully release the parking brake.Driving the vehicle with the parking brake set will lead to brake componentsoverheati...

146 2-1. Driving procedures Horn ■ After adjusting the steering wheel Make sure that the steering wheel is securely locked.The horn may not sound if the steering wheel is not securely locked. ( → P. 64) To sound the horn, press on orclose to the mark.

147 2 When drivin g 2-2. Instrument cluster Gauges and meters Type A Type B

149 2-2. Instrument cluster 2 When drivin g Instrument panel light control The brightness of the instrument panel lights can be adjusted. DarkerBrighter NOTICE ■ To prevent damage to the engine and its components ● Do not let the indicator needle of the tachometer enter the red zone, whichindicates ...

150 2-2. Instrument cluster Indicators and warning lights The indicator and warning lights on the instrument cluster and cen-ter panel inform the driver of the status of the vehicle’s various sys-tems. ■ Instrument cluster Type A Type B

151 2-2. Instrument cluster 2 When drivin g ■ Center panel

152 2-2. Instrument cluster ■ Indicators The indicators inform the driver of the operating state of thevehicle’s various systems. * 1 : These lights turn on when the “ENGINE START STOP” switch is turned to IGNITION ON mode (vehicles with smart key system) orthe engine switch is turned to the “ON” po...

153 2-2. Instrument cluster 2 When drivin g CAUTION ■ If a safety system warning light does not come on Should a safety system light such as the ABS or SRS airbag warning lightnot come on when you start the engine, this could mean that these systemsare not available to help protect you in an acciden...

154 2-2. Instrument cluster Multi-information display Switch the display Display items can be switchedby pressing the display button. ● Outside temperature ● Instantaneous fuel consumption The multi-information display presents the driver with a variety ofdriving-related data, including the outside ...

155 2-2. Instrument cluster 2 When drivin g ● Average fuel consumption ● Driving range ● Average vehicle speed ● Elapsed time Displays the average fuel consumption since thefunction was reset. The function can be reset by pressing the display but-ton for longer than one second when the average fuelc...

156 2-2. Instrument cluster ■ When disconnecting and reconnecting battery terminals The following information data will be reset. ● Average fuel consumption ● Driving range ● Average vehicle speed ● Elapsed time ■ Display In the following situations, the correct outside temperature may not be dis-pl...

157 2 When drivin g 2-3. Operating the lights and wipers Headlight switch Turning on the high beam headlights With the headlights on, pushthe lever forward to turn on thehigh beams. Pull the lever back to the centerposition to turn the high beamsoff. Pull the lever toward you toturn on the high beam...

158 2-3. Operating the lights and wipers ■ Daytime running light system ● To make your vehicle more visible to other drivers, the headlights turn onautomatically whenever the engine is started and the parking brake isreleased. ● Compared to turning on the headlights, the daytime running light system...

159 2-3. Operating the lights and wipers 2 When drivin g Fog light switch ∗ The fog lights improve visibility in difficult driving conditions, suchas in rain or fog. They can be turned on only when the headlights areon low beam. OffFront fog lights on ∗ : If equipped

160 2-3. Operating the lights and wipers Windshield wipers and washer Wiper intervals can be adjusted for intermittent operation. Intermittent windshieldwiper operationLow speed windshield wiperoperationHigh speed windshieldwiper operationTemporary operation Increases the intermittentwindshield wipe...

161 2-3. Operating the lights and wipers 2 When drivin g ■ The windshield wipers and washers can be operated when Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. Vehicles without smart key system The engine switch is in the “ON” position. ■ If no windshield wash...

162 2-4. Using other driving systems Cruise control ∗ Use the cruise control to maintain a set speed without depressingthe accelerator pedal. IndicatorsCruise control switch ■ Setting the vehicle speed Press the “ON-OFF” button toactivate the cruise control. Press the button again todeactivate the c...

163 2-4. Using other driving systems 2 When drivin g ■ Adjusting the set speed To change the set speed, operate the lever until the desired setspeed is obtained. Increases the speedDecreases the speed Fine adjustment: Momentarilymove the lever in the desireddirection. Large adjustment: Hold thelever...

164 2-4. Using other driving systems ■ Cruise control can be set when ● Automatic transmission:The shift lever is in the D or 3 range (standard type), or in the D or range4 or higher of S has been selected (multi-mode type). ● Vehicle speed is above approximately 25 mph (40 km/h). ■ Accelerating The...

165 2-4. Using other driving systems 2 When drivin g ■ Automatic cruise control cancelation Cruise control will stop maintaining the vehicle speed in any of the followingsituations. ● Actual vehicle speed falls more than approximately 10 mph (16 km/h)below the preset vehicle speed.At this time, the ...

166 2-4. Using other driving systems Driving assist systems When VSC and TRAC are operating If the vehicle is in danger of slip-ping or the front wheels spin, theindicator flashes to indicate thatVSC/TRAC have been engaged. A buzzer (intermittent) sounds toindicate that VSC is operating. To help enh...

167 2-4. Using other driving systems 2 When drivin g To disable TRAC and/or VSC If the vehicle gets stuck in fresh snow or mud, TRAC and VSC mayreduce power from the engine to the wheels. You may need to turnthe system off to enable you to rock the vehicle in order to free it. ■ Turning off TRAC Qui...

168 2-4. Using other driving systems ■ Sounds and vibrations caused by ABS, brake assist, VSC and TRAC ● A sound may be heard from the engine compartment when the engine isstarted or just after the vehicle begins to move. This sound does not indi-cate that a malfunction has occurred in any of these ...

169 2-4. Using other driving systems 2 When drivin g CAUTION ■ Stopping distance when ABS is operating on the wet or slick roads ABS is not designed to shorten the vehicle's stopping distance. Alwaysmaintain a safe distance from the vehicle in front of you in the following situ-ations. ● When drivin...

192 3-1. Using the air conditioning system and defogger Automatic air conditioning system ∗ Using the automatic mode Press . The air conditioning system will begin to operate. Press “ ∧ ” to increase the temperature and “ ∨ ” to decrease the temperature on . Air outlets and fan speed are automatical...

193 3-1. Using the air conditioning system and defogger 3 Interior fe atures Adjusting the settings ■ Adjusting the temperature setting Press “ ∧ ” to increase the temperature and “ ∨ ” to decrease the tem- perature on . ■ Adjusting the fan speed Press “ ∧ ” (increase) or “ ∨ ” (decrease) on . The f...

194 3-1. Using the air conditioning system and defogger Air flows to the upper body andfeet. : Some models Mainly air flows to the feet. : Some models Air flows to the feet and thewindshield defogger operates. Recirculated air mode will auto-matically switch to outside airmode. : Some models ■ Switc...

195 3-1. Using the air conditioning system and defogger 3 Interior fe atures Defogging the windshield Defogging The air conditioning system oper-ates automatically. Recirculated air mode will auto-matically switch to outside airmode. It is not possible to returnto recirculated air mode when theswitc...

197 3-1. Using the air conditioning system and defogger 3 Interior fe atures ■ Air conditioning odors ● During use, various odors from inside and outside the vehicle may enterinto and accumulate in the air conditioning system. This may then causeodor to be emitted from the vents. ● To reduce potenti...

198 3-1. Using the air conditioning system and defogger Manual air conditioning system ∗ Heater Fan speed control dial Air outlet selection dial Air intake mode switch Temperature control dial ∗ : If equipped

199 3-1. Using the air conditioning system and defogger 3 Interior fe atures Adjusting the settings ■ Adjusting the temperature setting (heater) Turn the temperature control dial clockwise to increase the temper-ature. ■ Adjusting the temperature setting (air conditioning system) Turn the temperatur...

200 3-1. Using the air conditioning system and defogger ■ Adjusting the fan speed Turn the fan speed control dial clockwise (increase) or counter-clockwise (decrease). Set the dial to “0” to turn the fan off. ■ Selecting the air outlets Set the air outlet selection dial to an appropriate position. T...

203 3-1. Using the air conditioning system and defogger 3 Interior fe atures ■ For quick cooling (vehicles with air conditioning system) Turn the temperature control dial to the “MAX A/C” position and select therecirculated air mode. ■ For quick clearing of the windshield and side windows (vehicles ...

204 3-1. Using the air conditioning system and defogger CAUTION ■ To prevent the windshield from fogging up Do not set the air outlet selection dial to during cool air operation in extremely humid weather. The difference between the temperature of theoutside air and that of the windshield can cause ...

205 3-1. Using the air conditioning system and defogger 3 Interior fe atures Rear window and outside rear view mirror defoggers ■ Outside rear view mirror defoggers (if equipped) Turning the rear window defogger on will turn the outside rear view mirrordefoggers on. CAUTION ■ Outside rear view mirro...

206 3-2. Using the audio system Audio system types Type A: CD player and AM/FM radio Type B: CD player and AM/FM radio

207 3-2. Using the audio system 3 Interior fe atures Type C: CD player with changer and AM/FM radio Title Page Using the radio P. 210 Using the CD player P. 217 Playing back MP3 and WMA discs P. 225 Operating an iPod P. 233 Operating a USB memory P. 240 Optimal use of the audio system P. 248 Using t...

208 3-2. Using the audio system Language settings (type B and C) The language used for all voice guidance, voice recognition and mes-sages may be changed. Press . Press (MORE). Press (LANG). Press the that corresponds to the desired language. For vehicles sold in the U.S.A. “ENG” (English) or “ESP” ...

209 3-2. Using the audio system 3 Interior fe atures CAUTION ■ For vehicles sold in U.S.A. and Canada ● Part 15 of the FCC Rules FCC Warning:Any unauthorized changes or modifications to this equipment will void theuser’s authority to operate this device. ● Laser products • Do not take this unit apar...

210 3-2. Using the audio system Using the radio Type A Type B and C Volume Seeking a frequency Station selector AM/FM mode buttons Adjusting the frequency Power Scanning for receivable stations Power Volume Adjusting the frequency(AM, FM mode) or channel (SAT mode) Seeking a frequency Displaying rad...

211 3-2. Using the audio system 3 Interior fe atures Setting station presets (excluding XM ® Satellite Radio) Type A Search for desired stations by turning or pressing “ ∧ ” or “ ∨ ” on . Press and hold the button (from to ) the station is to be set to until you hear a beep. Type B and C Search for ...

213 3-2. Using the audio system 3 Interior fe atures ■ Scanning XM ® Satellite Radio channels ● Scanning channels in the current category Press . When the desired channel is reached, press again. ● Scanning preset channels Press and hold until you hear a beep. When the desired channel is reached, pr...

215 3-2. Using the audio system 3 Interior fe atures ■ If XM ® Satellite Radio does not operate normally (type B and C) If a problem occurs with the XM ® tuner, a message will appear on the dis- play. Refer to the table below to identify the problem, and take the suggestedcorrective action. ANTENNA ...

216 3-2. Using the audio system Contact the XM ® Listener Care Center at 1-800-967-2346 (U.S.A.) or 1-877- 438-9677 (Canada). ■ Certifications for the radio tuner This equipment has been tested and found to comply with the limits for aclass B digital device, pursuant to Part 15 of the FCC Rules. The...

217 3-2. Using the audio system 3 Interior fe atures Using the CD player Type A Type B and C Volume Random playback Repeat play Playback Power CD eject Displaying text messages Searching playback Selecting a track/fast-forwardingand rewinding Power Volume CD load (type C only) Searching playback CD ...

218 3-2. Using the audio system Loading CDs ■ Loading a CD Type A and BInsert a CD. Type C Press .When the indicator on the slot turns from amber to green,insert a CD. ■ Loading multiple CDs (type C only) Press and hold until you hear a beep. When the indicator on the slot turns from amber to green,...

219 3-2. Using the audio system 3 Interior fe atures Ejecting CDs ■ Ejecting a CD Type A and BPress and remove the CD. Type C To select the CD to be ejected, press ( ) or ( ). The selected CD number is shown on the display. Press and remove the CD. ■ Ejecting all the CDs (type C only) Press and hold...

221 3-2. Using the audio system 3 Interior fe atures ■ All CDs (type C only) Press (RDM) twice. Tracks on all loaded CDs are played in random order. To cancel, press the button again. Repeat play ■ Repeating a track Press (RPT) or (RPT). To cancel, press the button once more (type A and B), or twice...

223 3-2. Using the audio system 3 Interior fe atures ■ Lens cleaners Do not use lens cleaners. Doing so may damage the CD player. NOTICE ■ CDs and adapters that cannot be used Do not use the following types of CDs, 3 in. (8 cm) CD adapters or DualDisc.Doing so may damage the CD player and/or the CD ...

224 3-2. Using the audio system NOTICE ■ CD player precautions Failure to follow the precautions below may result in serious damage to theCDs or the player itself. ● Do not insert anything other than CDs into the CD slot. ● Do not apply oil to the CD player. ● Store CDs away from direct sunlight. ● ...

225 3-2. Using the audio system 3 Interior fe atures Playing back MP3 and WMA discs Type A Type B and C Volume Random playback Repeat play Playback Power CD eject Displaying text messages Searching playback Selecting a file Selecting a folder Selecting a file/fast-forwarding and rewinding Power Volu...

227 3-2. Using the audio system 3 Interior fe atures ■ Selecting the desired file by cueing the files in the folder Press or . When the desired file is reached, press or once again. Fast-forwarding and reversing files To fast-forward or reverse, press and hold “ ∧ ” or “ ∨ ” on or . Playing and paus...

228 3-2. Using the audio system Repeat play ■ Repeating a file Press (RPT) or (RPT). To cancel, press the button once more (type A), twice more (type B) orthree times (type C). ■ Repeating all of the files on a folder Type APress and hold (RPT) until you hear a beep. To cancel, press the button agai...

229 3-2. Using the audio system 3 Interior fe atures ■ Display (type A only) → P. 222 ■ Error messages “CD CHECK”: This indicates a problem either in the CD or inside the player. The CD may be dirty, damaged or inserted up-side down. “NO MUSIC”: This indicates that MP3/WMA files are not included in ...

230 3-2. Using the audio system ■ MP3 and WMA files MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by usingMP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses ...

233 3-2. Using the audio system 3 Interior fe atures Operating an iPod ∗ ∗ : If equipped Connecting an iPod enables you to enjoy music from the vehiclespeakers. ■ Connecting an iPod Open the cover and connectan iPod using an iPod cable. Turn on the power of the iPod ifit is not turned on. Press . ST...

234 3-2. Using the audio system ■ Control panel Power Volume Selector knob Displaying text messages Selector buttons Playback Playback/pause Selecting a track/fast-forwarding and rewinding

235 3-2. Using the audio system 3 Interior fe atures Selecting a play mode Press (BROWSE) to select iPod menu mode. Press that corresponds to the desired play mode. Pressing (MORE) to change to the second selection list. ■ Play mode list Depending on the model, the name of your iPod may be displayed...

236 3-2. Using the audio system ■ Selecting a list Turn to display the first selection list. Press to select the desired item. Repeat the same procedure to select the desired song name. To return to the previous selection list, press ( ). Selecting songs from a song list Press (LIST). The current pl...

238 3-2. Using the audio system Switching the display Press . Each time is pressed, the display changes in the following order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time ■ About iPod ● Apple is not responsible for the operation of this device or its co...

239 3-2. Using the audio system 3 Interior fe atures ■ Compatible models Depending on differences between models or software version etc., somemodels listed above might be incompatible with this system. iPod 4th generation and earlier models are not compatible with this system. iPhone, iPod mini, iP...

240 3-2. Using the audio system Operating a USB memory ∗ Connecting a USB memory enables you to enjoy music from thevehicle speakers. ■ Connecting a USB memory Open the cover and connect aUSB memory. Turn on the power of the USBmemory if it is not turned on. Press . STEP 1 STEP 2 ∗ : If equipped

242 3-2. Using the audio system Selecting and scanning a folder ■ Selecting a folder Press “ ∧ ” or “ ∨ ” on to select the desired folder. ■ Returning to the first file of the first folder Press and hold “ ∨ ” on until you hear a beep. ■ Scanning the first file of all the folders Press and hold unti...

247 3-2. Using the audio system 3 Interior fe atures NOTICE ■ To prevent damage to a USB memory ● Do not leave a USB memory in the vehicle. The temperature inside maybecome high, resulting in damage to the player. ● Do not push down on or apply unnecessary pressure to the USB memorywhile it is conne...

248 3-2. Using the audio system Optimal use of the audio system Type A Type B and C Adjusting the sound quality and ASL Adjusting the sound quality and ASL Selector buttons Menu button

249 3-2. Using the audio system 3 Interior fe atures Using the audio control function ■ Changing sound quality modes Type A Pressing selects the mode to be changed in the following order. “BAS” → “TRE” → “FAD” → “BAL” → “ASL” Type B and C Press . Press the that corresponds to the desired mode. “BASS...

250 3-2. Using the audio system Type B and C *: The sound quality level is adjusted individually in each audio mode. ■ Adjusting the Automatic Sound Levelizer (ASL) Type A When “ASL” is selected, turning to the right changes the amount of “ASL” in the order of “LOW”, “MID” and “HIGH”. Turning to the...

251 3-2. Using the audio system 3 Interior fe atures Type B and C Press . Press (MORE). Press (ASL). Press the that corresponds to the desired mode. Type B: “LOW”, “MID”, “HIGH”, or “OFF” Type C: “ON” or “OFF” ASL automatically adjusts the volume and tone quality accordingto vehicle speed. ■ Setting...

252 3-2. Using the audio system ■ Trademark owned by SRS Labs, Inc. (provided to the audio modelswith SRS Labs technology) The audio systems utilize SRS FOCUS TM and SRS TruBass ® audio enhancement technologies, under license from SRS Labs, Inc., in all modesexcept AM radio mode. FOCUS, TruBass, SRS...

253 3-2. Using the audio system 3 Interior fe atures Using the AUX port This port can be used to connect a portable audio device and listento it through the vehicle’s speakers. Open the cover and connect the portable audio device. Type A Type B and C STEP 1

255 3-2. Using the audio system 3 Interior fe atures Using the steering wheel audio switches ∗ ∗ : If equipped Some audio features can be controlled using the switches on thesteering wheel. Type A VolumeRadio mode: Selects radiostationsCD mode: Selects tracks,files (MP3 and WMA) anddiscs (type C onl...

256 3-2. Using the audio system Turning on the power Press or when the audio system is turned off. The audio system can be turned off by holding or down until you hear a beep. Type B VolumeRadio mode: Selects radiostationsCD mode: Selects tracks,files (MP3 and WMA) anddiscs (type C only)iPod mode: S...

257 3-2. Using the audio system 3 Interior fe atures Changing the audio source Press or when the audio system is turned on. The audio source changes as follows each time or is pressed. Type A FM → CD → AUX → AM Type B and C FM → SAT → CD (type B) → CD changer (type C) → Bluetooth ® Audio → AUX → USB...

258 3-2. Using the audio system Selecting a track/file or song Press or to select CD, iPod, USB memory or Bluetooth ® audio mode. Press “ ∧ ” or “ ∨ ” on or to select the desired track/file or song. Selecting a folder or album Press or to select CD, USB memory or Bluetooth ® audio mode. Press and ho...

259 3 Interior fe atures 3-3. Using the Bluetooth ® audio system Bluetooth ® audio system ∗ ■ Conditions under which the system will not operate ● If using a portable player that does not support Bluetooth ® ● If the portable player is switched off ● If the portable player is not connected ● If the ...

260 3-3. Using the Bluetooth ® audio system ■ When transferring ownership of the vehicle Be sure to initialize the system to prevent personal data from being improp-erly accessed. ( → P. 300) ■ About Bluetooth ® ■ Compatible models ● Bluetooth ® specifications: Ver. 1.2 ● Following Profiles: • A2DP ...

261 3-3. Using the Bluetooth ® audio system 3 Interior fe atures CAUTION ■ FCC WARNING Changes or modifications not expressly approved by the party responsiblefor compliance could void the user's authority to operate the equipment. Radio Frequency Radiation Exposure. This equipment complies with FCC...

262 3-3. Using the Bluetooth ® audio system Using the Bluetooth ® audio system ■ Audio unit Display Track title, Artist name,Album name, Elapsed time,“Streaming Audio”, etc. isdisplayed.Selects items such as menuand numberTurn: Selects an itemPress: Inputs the selecteditemBluetooth-Audio connec-tion...

263 3-3. Using the Bluetooth ® audio system 3 Interior fe atures Operating the system using voice commands By following voice guidance instructions output from the speaker,voice commands enable the operation of the Bluetooth ® audio sys- tem without the need to check the display or operate . ■ Opera...

265 3-3. Using the Bluetooth ® audio system 3 Interior fe atures Input the passkey into the portable player. Refer to the manual that comes with the portable player for the oper-ation of the portable player. Guidance for registration completion is heard. If the portable player has a Bluetooth ® phon...

266 3-3. Using the Bluetooth ® audio system ■ When using a voice command For numbers, say a combination of single digits from zero to nine. Say the command correctly and clearly. ■ Situations where the system may not recognize your voice ● When driving on rough roads ● When driving at high speeds ● ...

267 3-3. Using the Bluetooth ® audio system 3 Interior fe atures Operating a Bluetooth ® enabled portable player Selecting an album Press “ ∨ ” or “ ∧ ” on . Selecting tracks Press “ ∧ ” or “ ∨ ” on . Playing and pausing tracks Press . Volume Power Playback/pause Displaying text messages Selector kn...

268 3-3. Using the Bluetooth ® audio system Fast-forwarding and reversing tracks Press and hold “ ∧ ” or “ ∨ ” on . Switching the display Press . Each time is pressed, the display changes in the following order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed tim...

269 3-3. Using the Bluetooth ® audio system 3 Interior fe atures Setting up a Bluetooth ® enabled portable player Registering a portable player in the Bluetooth ® audio system allows the system to function. The following functions can be used for reg-istered portable players: ■ Functions and operati...

270 3-3. Using the Bluetooth ® audio system Registering a portable player Select “Pair Audio Players (Pair audio player)” using a voice com- mand or , and perform the procedure for registering a portable player. ( → P. 264) Selecting a portable player to be used Select “Select Audio Player” using a ...

271 3-3. Using the Bluetooth ® audio system 3 Interior fe atures Press the talk switch and say “From car” or “From audio”, and select “Confirm” using a voice command or . Vehicles with smart key system: If “From car” is selected, the porta-ble player will be automatically connected whenever the “ENG...

272 3-3. Using the Bluetooth ® audio system Listing the registered portable players Select “List Audio Players” using a voice command or . The list of registered portable players will be read aloud.When listing is complete, the system returns to “BT Audio Setup”. Pressing the talk switch while the n...

273 3-3. Using the Bluetooth ® audio system 3 Interior fe atures Deleting a registered portable player Select “Delete Audio Player” using a voice command or . Select the portable player to be deleted by either of the follow-ing methods and select “Confirm” using a voice command or : a. Press the tal...

274 3-3. Using the Bluetooth ® audio system Bluetooth ® audio system setup ■ System setup items and operation procedures → P. 298

275 3 Interior fe atures 3-4. Using the hands-free phone system (for cellular phone) Hands-free phone system (for cellular phone) features ∗ This system supports Bluetooth ® , which allows you to make or receive calls without using cables to connect a cellular phone andthe system, and without operat...

277 3-4. Using the hands-free phone system (for cellular phone) 3 Interior fe atures ■ Conditions under which the system will not operate ● If using a cellular phone that does not support Bluetooth ® ● If the cellular phone is switched off ● If you are outside service range ● If the cellular phone i...

278 3-4. Using the hands-free phone system (for cellular phone) CAUTION ■ FCC WARNING Changes or modifications not expressly approved by the party responsiblefor compliance could void the user's authority to operate the equipment. Radio Frequency Radiation Exposure. This equipment complies with FCC/...

279 3-4. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Using the hands-free phone system ∗ ■ Audio unit DisplayA message, name, phonenumber, etc. is displayed. Lower-case characters andspecial characters, such asan umlaut, cannot be dis-played. Selects speed dialsSelect...

280 3-4. Using the hands-free phone system (for cellular phone) ■ Steering wheel telephone switches Type A Volume The voice guidance volumecannot be adjusted by usingthis switch. Off-hook switch Turns the hands-free sys-tem on/starts a callOn-hook switch Turns the hands-free sys-tem off/ends a call/...

282 3-4. Using the hands-free phone system (for cellular phone) Operating the system using a voice command By following voice guidance instructions output from the speaker,voice commands enable the operation of the hands-free phone sys- tem without the need to check the display or operate . ■ Operat...

283 3-4. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Using the hands-free phone system for the first time Before using the hands-free phone system, it is necessary to registera cellular phone in the system. The phone registration mode will beentered automatically when...

284 3-4. Using the hands-free phone system (for cellular phone) Registration to the hands-free phone system only Select “Phone Only” using a voice command or . Registration to the hands-free phone system and Bluetooth ® audio system at the same time Select “Int. Audio (Internal audio)” using a voice...

285 3-4. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Menu list of the hands-free phone system ■ Normal operation First menu Second menu Third menu Operation detail CallBack(Call back) - - Dialing a number stored in the incoming call history Redial - - Dialing a number...

287 3-4. Using the hands-free phone system (for cellular phone) 3 Interior fe atures ■ Using a short cut key First menu Second menu Operation detail Dial “XXX (name)” - Dialing a number registered in the phone book Dial “XXX (number)” - Dialing the input numbers Phone book add entry - Adding a new n...

289 3-4. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Making a phone call Dialing by inputting a number Press the talk switch and say “Dial by number”.Press the talk switch and say the phone number. ■ Making a phone call ● Dialing by inputting a number“Dial by Number” ...

290 3-4. Using the hands-free phone system (for cellular phone) Dial by one of the following methods:a. Press the off-hook switch.b. Press the talk switch and say “Dial”. c. Select “Dial” using . Dialing by inputting a name Press the talk switch and say “Dial by name”.Select a registered name to be ...

291 3-4. Using the hands-free phone system (for cellular phone) 3 Interior fe atures When receiving a phone call ■ Answering a phone call Press the off-hook switch. ■ Refusing a phone call Press the on-hook switch. Transferring a phone call A call can be transferred between the cellular phone and sy...

292 3-4. Using the hands-free phone system (for cellular phone) Select the number by either of the following methods:a. Say “Previous” or “Go back” until the desired number is dis- played. b. Select the desired number using . The following operations can be performed: Dialing: Press the off-hook swi...

293 3-4. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Setting a cellular phone Registering a cellular phone Select “Pair Phone” using a voice command or , and perform the procedure for registering a cellular phone. ( → P. 283) Registering a cellular phone in the hands-...

295 3-4. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Press the talk switch or select “Record Name” using , and say a new name. Select “Confirm” using a voice command or . Listing the registered cellular phones Selecting “List Phones” using a voice command or causes th...

296 3-4. Using the hands-free phone system (for cellular phone) Deleting a cellular phone Select “Delete Phone” using a voice command or . Select a cellular phone to be deleted by either of the followingmethods and select “Confirm” using a voice command or : a. Press the talk switch and say the name...

297 3-4. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Turning the hands-free phone automatic connection on/off ■ Turning off the automatic connection Select “Handsfree Power” using a voice command or . Select “Turn off” using a voice command or . ■ Turning on the autom...

298 3-4. Using the hands-free phone system (for cellular phone) Security and system setup Setting or changing the PIN ■ Setting a PIN Select “Set PIN” using a voice command or . Enter a PIN using a voice command or . When using , input the code 1 digit at a time. To enter the menu of each setting, f...

299 3-4. Using the hands-free phone system (for cellular phone) 3 Interior fe atures ■ Changing the PIN Select “Set PIN” using a voice command or . Enter the registered PIN using a voice command or . Enter a new PIN using a voice command or . When using , input the code 1 digit at a time. Locking or...

301 3-4. Using the hands-free phone system (for cellular phone) 3 Interior fe atures ■ Initialization ● The following data in the system can be initialized: • Phone book• Outgoing and incoming call history• Speed dials• Registered cellular phone data• Security code ● Once the initialization has been...

302 3-4. Using the hands-free phone system (for cellular phone) Using the phone book Adding a new phone number The following methods can be used to add a new phone number: ● Inputting a phone number by using a voice command ● Transferring data from the cellular phone ● Inputting a phone number using...

304 3-4. Using the hands-free phone system (for cellular phone) Inputting a phone number using STEP2-1 Select “Manual Input” using . STEP2-2 Input a phone number using , and press once again. Input the phone number 1 digit at a time. Selecting a phone number from outgoing or incoming call history ST...

305 3-4. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Select the name to be registered by either of the followingmethods, and select “Confirm” using a voice command or : a. Press the talk switch and say the desired name. b. Select “Record Name” using , and say the desi...

306 3-4. Using the hands-free phone system (for cellular phone) Select a desired preset button, and register the data intospeed dial by either of the following methods:a. Press the desired preset button, and select “Confirm” using a voice command or . b. Press and hold the desired preset button. Cha...

307 3-4. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Deleting registered data Select “Delete Entry” using a voice command or . Select the data to be deleted by either of the following meth- ods, and select “Confirm” using a voice command or : a. Press the talk switch,...

308 3-4. Using the hands-free phone system (for cellular phone) Listing the registered data Selecting “List names” using a voice command causes a list of theregistered data to be read aloud. When listing is complete, the system returns to “Phonebook”.Pressing the talk switch while the desired data i...

309 3 Interior fe atures 3-5. Using the interior lights Interior lights list Interior light ( → P. 311) Personal lights or personal/interior lights ( → P. 311, 312) “ENGINE START STOP” switch light (vehicles with smart keysystem)

310 3-5. Using the interior lights ■ Illuminated entry system Vehicles without moon roof The interior light (with the switch in the “DOOR” position) and “ENGINESTART STOP” switch light (vehicles with smart key system) automaticallyturn on/off according to “ENGINE START STOP” switch mode (vehicles wi...

311 3-5. Using the interior lights 3 Interior fe atures Interior light “DOOR” positionOffOn Personal lights (vehicles without moon roof) On/off Interior light and personal lights

312 3-5. Using the interior lights Personal/interior lights (vehicles with moon roof) ■ Interior lights “DOOR” positionOffOn ■ Personal lights On/off Personal/interior lights

313 3 Interior fe atures 3-6. Using the storage features List of storage features CAUTION ■ Items that should not be left in the storage spaces Do not leave glasses, lighters or spray cans in the storage spaces, as thismay cause the following when cabin temperature becomes high: ● Glasses may be def...

314 3-6. Using the storage features Glove box Pull up the lever. Console box Type A Lift the lid while pulling the lever. CAUTION ■ Caution while driving Keep the glove box closed.Injuries may result in the event of an accident or sudden braking. Glove box and console box

315 3-6. Using the storage features 3 Interior fe atures Type B Lift the lid while pulling the lever. Lift the lid and tray.Lift the lid. Pull the tray up to open the box. ■ When using the console box lid as an armrest (type B only) CAUTION ■ Caution while driving Keep the console box closed.Injurie...

317 3-6. Using the storage features 3 Interior fe atures ■ Adjusting the size of the cup holder (front) CAUTION ■ Items unsuitable for the cup holder Do not place anything other than cups or aluminum cans in the cup holders.Other items may be thrown out of the holders in the event of an accident ors...

319 3-6. Using the storage features 3 Interior fe atures Type D Pull up the lever. CAUTION ■ Caution while driving Keep the auxiliary boxes closed.Injuries may result in the event of an accident or sudden braking. ■ Items unsuitable for storing (type C only) Do not store items heavier than 0.4 lb. (...

320 3-6. Using the storage features Bottle holders Front Rear CAUTION ■ Items unsuitable for the bottle holder Do not place anything other than pet bottles in the bottle holders.Other items may be thrown out of the holders in the event of an accident orsudden braking and cause injury. Bottle holders

321 3 Interior fe atures 3-7. Other interior features Sun visors Forward position: Flip down.Side position: Flip down, unhook, andswing to the side.

322 3-7. Other interior features Vanity mirrors Slide the cover.

323 3-7. Other interior features 3 Interior fe atures Clock ■ The clock is displayed when Vehicles with smart key system The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ONmode. Vehicles without smart key system The engine switch is in the “ACC” or “ON” position. ■ When disconnecting and r...

324 3-7. Other interior features Ashtray ∗ CAUTION ■ When not in use Keep the ashtray closed.Injuries may result in the event of sudden braking, sudden swerving or anaccident. ■ To prevent fire ● Fully extinguish matches and cigarettes before putting them in the ashtray,then make sure the ashtray is...

325 3-7. Other interior features 3 Interior fe atures Cigarette lighter ∗ ■ The cigarette lighter can be used when Vehicles with smart key system The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ONmode. Vehicles without smart key system The engine switch is in the “ACC” or “ON” position. C...

326 3-7. Other interior features Power outlet ∗ ■ The power outlet can be used when Vehicles with smart key system The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ONmode. Vehicles without smart key system The engine switch is in the “ACC” or “ON” position. NOTICE ■ To avoid damaging the p...

327 3-7. Other interior features 3 Interior fe atures Seat heaters ∗ ■ The seat heaters can be used when Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. Vehicles without smart key system The engine switch is in the “ON” position. CAUTION ■ Burns ● Use caution wh...

328 3-7. Other interior features NOTICE ■ To prevent seat heater damage Do not put unevenly weighted objects on the seat and do not stick sharpobjects (needles, nails, etc.) into the seat. ■ To prevent battery discharge Turn the switches off when the engine is not running.

329 3-7. Other interior features 3 Interior fe atures Floor mat CAUTION Observe the following precautions. Failure to do so may cause the driver's floor mat to slip, possibly interfering with the pedals while driving. An unexpectedly high speed may result or it may become difficult to stop the vehic...

330 3-7. Other interior features Compass ∗ The compass on the inside rear view mirror indicates the direction inwhich the vehicle is heading. ■ Operation To turn the compass on or off,press and hold “AUTO” for 3seconds. ■ Displays and directions Display Direction N North NE Northeast E East SE South...

331 3-7. Other interior features 3 Interior fe atures Calibrating the compass The direction display deviates from the true direction determined bythe earth’s magnetic field. The amount of deviation varies accordingto the geographic position of the vehicle. If you cross over a map boundary shown in t...

332 3-7. Other interior features ■ Circling calibration Stop the vehicle in a place where it is safe to drive in a circle. Press and hold “AUTO” for 9seconds. C appears on the compass dis-play. Drive the vehicle at 5 mph (8 km/h) or less in a circle until adirection is displayed. If there is not eno...

333 3-7. Other interior features 3 Interior fe atures CAUTION ■ While driving the vehicle Do not adjust the display. Be sure to adjust the display only when the vehicleis stopped. ■ When doing the circling calibration Be sure to secure a wide space, and watch out for people and vehicles in theneighb...

336 4-1. Maintenance and care Cleaning and protecting the vehicle exterior ■ Automatic car washes ● Fold the mirrors back before washing the vehicle. ● Brushes used in automatic car washes may scratch the vehicle surfaceand harm your vehicle’s paint. ■ High pressure car washes ● Do not allow the noz...

337 4-1. Maintenance and care 4 Mainten ance an d ca re ■ Bumpers Do not scrub with abrasive cleaners. CAUTION ■ Caution about the exhaust pipe Exhaust gasses cause the exhaust pipe to become quite hot. When washing the vehicle, be careful not to touch the pipe until it has cooledsufficiently, as to...

338 4-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle's interior andkeep it in top condition: ■ Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty sur-faces with a cloth dampened with lu...

339 4-1. Maintenance and care 4 Mainten ance an d ca re ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a yearto maintain the quality of the vehicle's interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use...

340 4-1. Maintenance and care NOTICE ■ Cleaning detergents ● Do not use organic substances such as benzene or gasoline, acidic oralkaline solutions, dye, bleach or other detergent. Doing so may discolorthe vehicle interior or cause streaks or damage to painted surfaces. ● Do not use polish wax or po...

341 4 Mainten ance an d ca re 4-2. Maintenance Maintenance requirements To ensure safe and economical driving, day-to-day care and regularmaintenance is essential. It is the owner’s responsibility to performregular checks. Toyota recommends the following maintenance. ■ General maintenance Should be ...

342 4-2. Maintenance ■ Repair and replacement It is recommended that genuine Toyota parts be used for repair to ensureperformance of each system. If non-Toyota parts are used in replacement orif a repair shop other than a Toyota dealer performs repairs, confirm the war-ranty coverage. ■ Reset the ma...

343 4-2. Maintenance 4 Mainten ance an d ca re CAUTION ■ Warning in handling of battery ● Engine exhaust, some of its constituents, and a wide variety of automobilecomponents contain or emit chemicals known to the State of California tocause cancer and birth defects and other reproductive harm. Work...

344 4-2. Maintenance ce Engine compartment Items Check points Battery Check the connections. ( → P. 366) Brake fluid At the correct level? ( → P. 363) Engine coolant At the correct level? ( → P. 362) Engine oil At the correct level? ( → P. 358) Exhaust system No fumes or strange sounds? Radiator/con...

345 4-2. Maintenance 4 Mainten ance an d ca re Vehicle interior Items Check points Accelerator pedal • Moves smoothly (without uneven pedal effort or catching)? Automatic transmission “Park” mechanism • Can the vehicle be held securely on an incline with the shift lever in P? Brake pedal • Moves smo...

346 4-2. Maintenance Vehicle exterior Items Check points Doors/trunk • Operate smoothly? Engine hood • The lock system works properly? Fluid leaks • Is there any leakage after park- ing? Tires • Inflation pressure is correct?• Tire surfaces not worn or dam- aged? • Tires rotated according to the mai...

347 4-2. Maintenance 4 Mainten ance an d ca re Emission inspection and maintenance (I/M) programs Some states have vehicle emission inspection programs whichinclude OBD (On Board Diagnostics) checks. The OBD system moni-tors the operation of the emission control system. ■ If the malfunction indicato...

348 4-3. Do-it-yourself maintenance Items Parts and tools Fuses ( → P. 390) • Fuse with same amperage rating as original Radiator and condenser ( → P. 363) ⎯ Tire inflation pressure ( → P. 378) • Tire pressure gauge• Compressed air source Washer fluid ( → P. 368) • Water washer fluid containing anti...

349 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION The engine compartment contains many mechanisms and fluids that maymove suddenly, become hot, or become electrically energized. To avoid deathor serious injury observe the following precautions. ■ When working on the engine compar...

350 4-3. Do-it-yourself maintenance NOTICE ■ If you remove the air cleaner Driving with the air cleaner removed may cause excessive engine wear dueto dirt in the air. Also, a backfire could cause a fire in the engine compart-ment.

351 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood release lever. The hood will pop up slightly. Lift the auxiliary catch leverand lift the hood. Hold the hood open by insert-ing the supporting rod into t...

352 4-3. Do-it-yourself maintenance CAUTION ■ Pre-driving check Check that the hood is fully closed and locked.If the hood is not locked properly, it may open while the vehicle is in motionand cause an accident, which may result in death or serious injury. ■ After installing the support rod into the...

353 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Positioning a floor jack When raising your vehicle with a floor jack, position the jack cor-rectly. Improper placement may damage your vehicle or cause injury. ■ Front 1.8 L 4-cylinder (2ZR-FE) engine 2.4 L 4-cylinder (2AZ-FE) engine ■ Re...

355 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION ■ When raising your vehicle Make sure to observe the following to reduce the possibility of death or seri-ous injury. ● When using a floor jack, follow the instructions of the manual provided withthe jack. ● Do not use the jack th...

359 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re 2.4 L 4-cylinder (2AZ-FE) engine LowFull ■ Adding engine oil If the oil level is below or nearthe low level mark, add engineoil of the same type as already inthe engine. Make sure to check the oil type and prepare the items needed beforea...

360 4-3. Do-it-yourself maintenance ■ Engine oil consumption ● The amount of engine oil consumed depends on the oil viscosity, thequality of the oil and the way the vehicle is driven. ● More oil is consumed under driving conditions such as high speeds andfrequent acceleration and deceleration. ● A n...

361 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION ■ Used engine oil ● Used engine oil contains potentially harmful contaminants which maycause skin disorders such as inflammation or skin cancer, so care shouldbe taken to avoid prolonged and repeated contact. To remove used engine...

362 4-3. Do-it-yourself maintenance Engine coolant The coolant level is satisfactory if it is between the “FULL” and “LOW”lines on the reservoir when the engine is cold. Reservoir cap“FULL”“LOW” If the level is on or below the“LOW” line, add coolant up to the“FULL” line. ( → P. 460) ■ If the coolant...

363 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Radiator and condenser Check the radiator and condenser and remove any foreign objects. If any of the above parts are extremely dirty or you are not sure oftheir condition, have your vehicle checked by your Toyota dealer. Brake fluid ■ Ch...

364 4-3. Do-it-yourself maintenance ■ Adding fluid Make sure to check the fluid type and prepare the necessary items. Slide and lift up the rubber stripto partly remove it as shown. Disconnect the claws andremove the service cover. Remove the reservoir cap. Add brake fluid slowly while checking the ...

365 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Brake fluid can absorb moisture from the air Excess moisture in the fluid can cause a dangerous loss of braking effi-ciency. Use only newly opened brake fluid. CAUTION ■ When filling the reservoir Take care because brake fluid can harm ...

366 4-3. Do-it-yourself maintenance Battery Check the battery as follows. ■ Battery exterior Make sure that the battery terminals are not corroded and thatthere are no loose connections, cracks, or loose clamps. TerminalsHold-down clampGround cable ■ Before recharging When recharging, the battery pr...

367 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION ■ Chemicals in the battery A battery contains poisonous and corrosive sulfuric acid and may producehydrogen gas which is flammable and explosive. To reduce the risk of deathor serious injury, take the following precautions while w...

368 4-3. Do-it-yourself maintenance Washer fluid If any washer does not work or the low windshield washer fluid levelwarning light comes on (if equipped), the washer tank may be empty. Open the lid. Add washer fluid. NOTICE ■ When recharging the battery Never recharge the battery while the engine is...

369 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re NOTICE ■ Do not use any fluid other than washer fluid Do not use soapy water or engine antifreeze instead of washer fluid. Doing so may cause streaking on the vehicle’s painted surfaces. ■ Diluting washer fluid Dilute washer fluid with wa...

370 4-3. Do-it-yourself maintenance Tires Replace or rotate tires in accordance with maintenance sched-ules and treadwear. ■ Checking tires New treadTreadwear indicatorWorn tread The location of treadwearindicators is shown by the“TWI” or “ ” marks, etc., molded on the sidewall ofeach tire. Check sp...

371 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Installing tire pressure warning valves and transmitters When replacing tires or wheels, tire pressure warning valves andtransmitters must also be installed. When new tire pressure warning valves and transmitters areinstalled, new tire pr...

372 4-3. Do-it-yourself maintenance Push and hold the tire pressurewarning reset switch until the tirepressure warning light blinksslowly 3 times. Vehicles with smart key system: Wait for a few minutes withthe IGNITION ON mode, and then turn the “ENGINE STARTSTOP” switch OFF. Vehicles without smart ...

373 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ When to replace your vehicle’s tires Tires should be replaced if: ● You have tire damage such as cuts, splits, cracks deep enough toexpose the fabric, or bulges indicating internal damage ● A tire goes flat repeatedly or cannot be prope...

374 4-3. Do-it-yourself maintenance ■ Low profile tires (vehicles with 17-inch tires) Generally, low profile tires will wear more rapidly and tire grip perfor-mance will be reduced on snowy and/or icy roads when compared tostandard tires. Be sure to use snow tires or tire chains on snowy and/oricy r...

375 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ When the initialization of the tire pressure warning system hasfailed Initialization can be completed in a few minutes. However, in the follow-ing cases, the settings have not been recorded and the system will notoperate properly. If re...

376 4-3. Do-it-yourself maintenance CAUTION ■ When inspecting or replacing tires Observe the following precautions to prevent accidents. Failure to do somay cause damage to parts of the drive train, as well as dangerous han-dling characteristics, which may lead to an accident resulting in death orse...

377 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re NOTICE ■ Repairing or replacing tires, wheels, tire pressure warning valves,transmitters and tire valve caps ● When removing or fitting the wheels, tires or the tire pressure warningvalves and transmitters, contact your Toyota dealer as t...

378 4-3. Do-it-yourself maintenance Tire inflation pressure ■ Tire inflation pressure The recommended cold tire inflation pressure and tire size is dis-played on the tire and loading information label. ( → P. 478) Type A Type B

379 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Tire inflation pressure check interval You should check tire inflation pressure every two weeks, or at leastonce a month.Do not forget to check the spare. ■ Inspection and adjustment procedure Tire valveTire pressure gauge Remove the ti...

380 4-3. Do-it-yourself maintenance ■ Effects of incorrect tire inflation pressure Driving with incorrect tire inflation pressure may result in the following: ● Reduced fuel efficiency ● Reduced driving comfort and tire life ● Reduced safety ● Damage to the drive train If a tire needs frequent refil...

381 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION ■ Proper inflation is critical to save tire performance Keep your tires properly inflated. Otherwise, the following conditionsmay occur and result in an accident causing death or serious injury. ● Excessive wear ● Uneven wear ● Po...

382 4-3. Do-it-yourself maintenance Wheels If a wheel is bent, cracked or heavily corroded, it should bereplaced.Otherwise, the tire may separate from the wheel or cause loss ofhandling control. ■ Wheel selection When replacing wheels, care should be taken to ensure thatthey are equivalent to those ...

383 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ When replacing wheels The wheels of your Toyota, except for the compact spare tire, areequipped with tire pressure warning valves and transmitters that allowthe tire pressure warning system to provide advanced warning in theevent of a l...

384 4-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain airconditioning efficiency. ■ Removal method Vehicles with smart key system: Turn the “ENGINE STARTSTOP” switch OFF.Vehicles without smart key system: Turn the engine switchO...

385 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Checking interval Replace the air conditioning filter according to the maintenance schedule. Industy areas or areas with heavy traffic flow, early replacement may berequired. (For scheduled maintenance information, please refer to the“S...

386 4-3. Do-it-yourself maintenance Key battery Replace the battery with a new one if it is discharged. ■ You will need the following items: ● Flathead screwdriver (To prevent damage to the key, coverthe tip of the screwdriver with a rag.) ● Small Phillips-head screwdriver ● Lithium battery Vehicles...

387 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Remove the depleted battery. Insert a new battery with the“+” terminal facing up. ■ Replacing the battery (vehicles without smart key system) Remove the cover. Remove the module. STEP 3 STEP 1 STEP 2

389 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ If the key battery is discharged The following symptoms may occur. ● The smart key system and wireless remote control will not function prop-erly. ● The operational range is reduced. ■ Use the following types of lithium battery Vehicles...

390 4-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may haveblown. If this happens, check and replace the fuses as necessary. Vehicles with smart key system: Turn the “ENGINE STARTSTOP” switch OFF.Vehicles without smart key syst...

391 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Driver’s side instrument panel Remove the instrument panel. After a system failure, see “Fuse layout and amperage rat-ings” ( → P. 394) for details about which fuse to check. Take out the pullout tool. Only type A fuse can beremoved using...

393 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Type C Normal fuseBlown fuse Contact your Toyota dealer. Type D Normal fuseBlown fuse Contact your Toyota dealer.

397 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Under the driver’s side instrument panel Fuse Ampere Circuit 1 DEF 40 A Rear window defogger, MIR HTR 2 PWR SEAT 30 A Power seat 3 TAIL 10 A Parking lights, tail lights, license plate lights, front side marker lights, multiport fuel inj...

399 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ After a fuse is replaced ● If the lights do not turn on even after the fuse has been replaced, a bulbmay need replacing. ( → P. 400) ● If the replaced fuse blows again, have the vehicle inspected by yourToyota dealer. ■ If there is an o...

400 4-3. Do-it-yourself maintenance Light bulbs You may replace the following bulbs yourself. The difficulty level ofreplacement varies depending on the bulb. If necessary bulbreplacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs, ...

401 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Rear bulb locations Stop/tail and rear side marker lights Rear turn signal lights Back-up lights License plate lights

403 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Unplug the bulb while depress-ing the lock release. ■ Front fog lights (if equipped) Remove the fender liner boltsand clip. Partly remove the fender liner. STEP 2 STEP 1 STEP 2

405 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Front turn signal/parking lights and front side marker lights Turn the steering wheel away from the side being worked on.This will move the tire to provide more room.Remove the fender liner bolts and clips. Partly remove the fender line...

406 4-3. Do-it-yourself maintenance Turn the bulb base counterclock-wise. Front side marker lightFront turn signal/parking light Remove the light bulb. Front side marker lightFront turn signal/parking light STEP 4 STEP 5

409 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ License plate lights Open the trunk lid and removethe trunk panel cover clips. Partly remove the trunk panelcover and turn the bulb basecounterclockwise. Remove the light bulb. ■ LED high mounted stoplight The high mounted stoplight con...

411 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION ■ Replacing light bulbs ● Turn off the headlights. Do not attempt to replace the bulb immediatelyafter turning off the headlights.The bulbs become very hot and may cause burns. ● Do not touch the glass portion of the light bulb wi...

414 5-1. Essential information Emergency flashers NOTICE ■ To prevent battery discharge Do not leave the emergency flashers on longer than necessary when theengine is not running. Use the emergency flashers if the vehicle malfunctions or isinvolved in an accident. Press the switch to flash allthe tu...

5 W hen tr ou ble ar ises 415 5-1. Essential information If your vehicle needs to be towed Before towing The following may indicate a problem with your transmission. Contactyour Toyota dealer before towing. ● The engine is running, but the vehicle will not move. ● The vehicle makes an abnormal sound...

416 5-1. Essential information Emergency towing If a tow truck is not available, in an emergency your vehicle may betemporarily towed using a cable or chain secured to the emergencytowing eyelet. This should only be attempted on hard surfaced roadsfor short distances at low speeds.A driver must be i...

5 W hen tr ou ble ar ises 417 5-1. Essential information ■ Emergency towing procedure Release the parking brake. Shift the shift lever to N. Vehicles with smart key system Turn the “ENGINE START STOP” switch to ACCESSORY (engineoff) or IGNITION ON (engine running) mode. Vehicles without smart key sy...

418 5-1. Essential information Towing with a sling-type truck Towing with a wheel-lift type truck from the front Release the parking brake. NOTICE ■ To prevent body damage Do not tow with a sling-type truck, either from the front or rear. NOTICE ■ To prevent damaging the vehicle When raising the veh...

5 W hen tr ou ble ar ises 419 5-1. Essential information Towing with a wheel-lift type truck from the rear Automatic transmission: Use atowing dolly under the frontwheels. Manual transmission: We recom-mend to use a towing dolly underthe front wheels. When not using a towing dolly,turn the engine sw...

420 5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probablyneeds adjustment or repair. Contact your Toyota dealer as soon aspossible. ■ Visible symptoms ● Fluid leaks under the vehicle(Water dripping from the air conditioning afte...

5 W hen tr ou ble ar ises 421 5-1. Essential information Fuel pump shut off system Follow the procedure below to restart the engine after the system isactivated. Vehicles with smart key system Turn the “ENGINE START STOP” switch OFF.Restart the engine. Vehicles without smart key system Turn the engi...

422 5-1. Essential information Event data recorder In a crash or a near car crash event The SRS airbag sensor assembly contains the EDR. In a crash or anear car crash event, this device may record some or all of the follow-ing information: ● Engine speed ● Whether the brake pedal was applied or not ...

5 W hen tr ou ble ar ises 423 5-1. Essential information Disclosure of the data Toyota will not disclose the data recorded in an EDR to a third partyexcept when: ● An agreement from the vehicle's owner (or the leasing company fora leased vehicle) is obtained ● Officially requested by the police or o...

424 5-2. Steps to take in an emergency If a warning light turns on or a warning buzzer sounds... Stop the vehicle immediately. Continuing to drive the vehiclemay be dangerous. The following warning indicates a possible problem in the brake sys-tem. Immediately stop the vehicle in a safe place and co...

5 W hen tr ou ble ar ises 425 5-2. Steps to take in an emergency Have the vehicle inspected immediately. Failing to investigate the cause of the following warnings may lead tothe system operating abnormally and possibly cause an accident.Have the vehicle inspected by your Toyota dealer immediately. ...

426 5-2. Steps to take in an emergency Follow the correction procedures. After taking the specified steps to correct the suspected problem,check that the warning light turns off. ■ If the malfunction indicator lamp comes on while driving First check the following: ● Is the fuel tank empty?If it is, ...

5 W hen tr ou ble ar ises 429 5-2. Steps to take in an emergency ■ SRS warning light This warning light system monitors the airbag sensor assembly, front airbagsensors, side and curtain shield airbag sensors, curtain shield airbag sen-sors, driver's seat position sensor, driver's seat belt buckle sw...

430 5-2. Steps to take in an emergency ■ When a tire is replaced with a spare tire The compact spare tire is not equipped with the tire pressure warningvalve and transmitter. If a tire goes flat, the tire pressure warning light willnot turn off even though the flat tire is replaced with the spare ti...

5 W hen tr ou ble ar ises 431 5-2. Steps to take in an emergency ■ If the tire pressure warning light comes on after blinking for 1minute frequently If the tire pressure warning light comes on after blinking for 1 minute fre-quently when the “ENGINE START STOP” switch or engine switch isturned ON, h...

432 5-2. Steps to take in an emergency CAUTION ■ Maintenance of the tires Each tire, including the spare (if provided), should be checked monthlywhen cold and inflated to the inflation pressure recommended by thevehicle manufacturer on the vehicle placard or tire inflation pressurelabel (tire and lo...

5 W hen tr ou ble ar ises 433 5-2. Steps to take in an emergency CAUTION Your vehicle has also been equipped with a TPMS (tire pressure warningsystem) malfunction indicator to indicate when the system is not operat-ing properly. The TPMS (tire pressure warning system) malfunction indi-cator is combi...

434 5-2. Steps to take in an emergency Follow the correction procedures. (vehicles with smart key system) After taking the specified steps to correct the suspected problem,check that the warning light turns off. Interiorbuzzer Exteriorbuzzer Warning light Warning light/Details Correction procedure O...

436 5-2. Steps to take in an emergency If you have a flat tire Remove the flat tire and replace it with the spare provided. ■ Before jacking up the vehicle ● Stop the vehicle on a hard, flat surface. ● Set the parking brake. ● Shift the shift lever to P (automatic transmission) or R (manualtransmiss...

5 W hen tr ou ble ar ises 437 5-2. Steps to take in an emergency Taking out the jack Remove the luggage floor cover. TightenLoosen STEP 1 STEP 2

438 5-2. Steps to take in an emergency Taking out the spare tire Remove the luggage floor cover. Remove the tool tray. Loosen the center fastener thatsecures the spare tire. STEP 1 STEP 2 STEP 3

5 W hen tr ou ble ar ises 439 5-2. Steps to take in an emergency Replacing a flat tire Chock the tires. Vehicles with a steel wheel,remove the wheel ornamentusing the wrench. To protect the wheel ornament,place a rag between the wrenchand the wheel ornament, asshown in the illustration. STEP 1 Flat ...

5 W hen tr ou ble ar ises 441 5-2. Steps to take in an emergency Raise the vehicle until the tire isslightly raised off the ground. Remove all the wheel nuts andthe tire. When resting the tire on theground, place the tire so that thewheel design faces up to avoidscratching the wheel surface. Install...

442 5-2. Steps to take in an emergency Install the tire and loosely tighten each wheel nut by hand byapproximately the same amount. Replacing a steel wheel with a compact spare tire Tighten the nuts until the taperedportion comes into loose contactwith the disc wheel seat. Replacing an aluminum whee...

5 W hen tr ou ble ar ises 443 5-2. Steps to take in an emergency Firmly tighten each nut two orthree times in the order shown inthe illustration. Tightening torque: 76 ft•lbf (103 N•m, 10.5 kgf•m) Stow the flat tire, tire jack and all tools. STEP 4 ■ The compact spare tire ● The compact spare tire i...

444 5-2. Steps to take in an emergency CAUTION ■ Using the tire jack Improper use of the tire jack may lead to death or serious injuries due tothe vehicle suddenly falling off the jack. ● Do not use the tire jack for any purpose other than replacing tires orinstalling and removing tire chains. ● Onl...

5 W hen tr ou ble ar ises 445 5-2. Steps to take in an emergency CAUTION ■ Replacing a flat tire Observe the following precautions to reduce the risk of death or seriousinjury: ● Never use oil or grease on the wheel bolts or wheel nuts.Oil and grease may cause the wheel nuts to be excessively tighte...

446 5-2. Steps to take in an emergency CAUTION ■ When the spare tire is attached The vehicle speed may not be correctly detected, and the following sys-tems may not operate correctly: ● ABS & Brake assist ● VSC ● TRAC NOTICE ■ Do not drive the vehicle with a flat tire. Do not continue driving wi...

448 5-2. Steps to take in an emergency If the engine will not start If the engine still does not start after following the correct startingprocedure ( → P. 129, 133) or releasing the steering lock ( → P. 131, 135), confirm the following points. ■ The engine will not start even when the starter motor...

5 W hen tr ou ble ar ises 449 5-2. Steps to take in an emergency Emergency start function (vehicles with smart key system) When the engine does not start, the following steps can be used asan interim measure to start the engine if the “ENGINE START STOP”switch is functioning normally. Set the parkin...

5 W hen tr ou ble ar ises 451 5-2. Steps to take in an emergency If you lose your keys New genuine keys can be made by your Toyota dealer. For vehicleswith the smart key system, bring the other key and the key numberstamped on the key number plate. For vehicles without the smart keysystem, bring a m...

452 5-2. Steps to take in an emergency If the electronic key does not operate properly (vehicles with smart key system) Locking and unlocking the doors and opening the trunk with themechanical key Doors Using the mechanical key ( → P. 21) in order to perform the fol-lowing operations. Locks all door...

5 W hen tr ou ble ar ises 453 5-2. Steps to take in an emergency Changing “ENGINE START STOP” switch modes and starting the engine Shift the shift lever to P and apply the brakes. Touch the Toyota emblem side ofthe electronic key to the“ENGINE START STOP” switch. An alarm will sound to indicatethat ...

454 5-2. Steps to take in an emergency If the battery is discharged The following procedures may be used to start the engine if the vehi-cle's battery is discharged.You can call your Toyota dealer or qualified repair shop. If you have a set of jumper (or booster) cables and a second vehi-cle with a ...

5 W hen tr ou ble ar ises 455 5-2. Steps to take in an emergency Connecting the jumper cables Positive (+) battery terminal on your vehiclePositive (+) battery terminal on the second vehicleNegative (-) battery terminal on the second vehicleConnect the jumper cable to ground on your vehicle as shown...

5 W hen tr ou ble ar ises 457 5-2. Steps to take in an emergency ■ Avoiding a discharged battery ● Turn off the headlights and the audio system while the engine is turnedoff. ● Turn off any unnecessary electrical components when the vehicle is run-ning at a low speed for an extended period, such as ...

458 5-2. Steps to take in an emergency CAUTION ■ Avoiding battery fires or explosions Observe the following precautions to prevent accidentally igniting the flam-mable gas that may be emitted from the battery. ● Make sure the jumper cable is connected to the correct terminal and that itis not uninte...

5 W hen tr ou ble ar ises 459 5-2. Steps to take in an emergency NOTICE ■ To prevent damage to the vehicle Do not pull- or push-start the vehicle, because the catalytic converter mayoverheat and become a fire hazard. ■ When handling jumper cables Be careful that the jumper cables do not become tangl...

460 5-2. Steps to take in an emergency If your vehicle overheats If your engine overheats: Stop the vehicle in a safe place and turn off the air condi-tioning system.Check to see if steam is coming out from under the hood.If you see steam: Stop the engine. Carefully lift the hood after the steamsubs...

5 W hen tr ou ble ar ises 461 5-2. Steps to take in an emergency ■ Overheating If you observe the following, your vehicle may be overheating. ● The engine coolant temperature gauge enters the red zone or a loss ofpower is experienced. ● Steam is coming from under the hood. CAUTION ■ To prevent an ac...

5 W hen tr ou ble ar ises 463 5-2. Steps to take in an emergency If the vehicle becomes stuck CAUTION ■ When attempting to free a stuck vehicle If you choose to rock the vehicle back and forth to free it, make sure the sur-rounding area is clear, to avoid striking other vehicles, objects or persons....

464 5-2. Steps to take in an emergency NOTICE ■ To avoid damaging the transmission and other components ● Avoid spinning the wheels and do not rev the engine. ● If the vehicle remains stuck after trying these procedures, the vehicle mayrequire towing to be freed.

5 W hen tr ou ble ar ises 465 5-2. Steps to take in an emergency If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop thevehicle in the normal way, stop the vehicle using the following pro-cedure: Steadily step on the brake pedal with both ...

466 5-2. Steps to take in an emergency CAUTION ■ If the engine has to be turned off while driving ● Power assist for the brakes and steering wheel will be lost, making thebrake pedal harder to depress and the steering wheel heavier to turn.Decelerate as much as possible before turning off the engine...

470 6-1. Specifications ■ Engine number The engine number is stamped on the engine block as shown. 1.8 L 4-cylinder (2ZR-FE) engine 2.4 L 4-cylinder (2AZ-FE) engine

471 6-1. Specifications 6 Vehicl e sp ecification s Engine 1.8 L 4-cylinder (2ZR-FE) engine *: Drive belt tension measured with Borroughs drive belt tension gauge No.BT-33-73F (used belt), lbf Model 2ZR-FE engine Type 4 cylinder in line, 4 cycle, gasoline Bore and stroke 3.17 × 3.48 in. (80.5 × 88.3...

472 6-1. Specifications 2.4 L 4-cylinder (2AZ-FE) engine Fuel Model 2AZ-FE engine Type 4 cylinder in line, 4 cycle, gasoline Bore and stroke 3.48 × 3.78 in. (88.5 × 96.0 mm) Displacement 144.1 cu.in. (2362 cm 3 ) Drive belt tension Automatic adjustment Valve clearance (engine cold) Intake Exhaust 0....

473 6-1. Specifications 6 Vehicl e sp ecification s Lubrication system ■ Engine oil selection “Toyota Genuine Motor Oil” is used in your Toyota vehicle. UseToyota approved “Toyota Genuine Motor Oil” or equivalent to satisfythe following grade and viscosity. Oil grade: ILSAC multigrade engine oil Rec...

474 6-1. Specifications The 20 in 0W-20 indicates the oil viscosity when the oil is at its operatingtemperature. An oil with a higher viscosity may be better suited if the vehi-cle is operated at high speeds, or under extreme load conditions. 2.4 L 4-cylinder (2AZ-FE) engine SAE 5W-20 or SAE 0W-20 S...

475 6-1. Specifications 6 Vehicl e sp ecification s Cooling system Ignition system Capacity (Reference) 1.8 L 4-cylinder (2ZR-FE) engine 5.8 qt. (5.5 L, 4.8 Imp. qt.) 2.4 L 4-cylinder (2AZ-FE) engine 6.0 qt. (5.7 L, 5.0 Imp. qt.) Coolant type Use either of the following. • “Toyota Super Long Life Co...

476 6-1. Specifications Electrical system Manual transaxle Battery Open voltage at 68 ° F (20 ° C): 12.6 ⎯ 12.8 V Fully charged 12.2 ⎯ 12.4 V Half charged 11.8 ⎯ 12.0 V Discharged (Voltage checked 20 minutes after the engine and all the lights turned off) Charging rates 5 A max. Gear oil capacity (R...

477 6-1. Specifications 6 Vehicl e sp ecification s Automatic transaxle Clutch Brakes * 1 : Minimum pedal clearance when depressed with a force of 66 lbf (294 N, 30 kgf) while the engine is running * 2 : Parking brake lever travel when pulled up with a force of 44 lbf (200 N, 20 kgf) Fluid capacity ...

478 6-1. Specifications Steering Tires and wheels Type A Type B Type C Free play Less than 1.2 in. (30 mm) Tire size P195/65R15 89S, T135/80R16 101M Tire inflation pressure(Recommended cold tire inflation pressure) Front: 30 psi (210 kPa, 2.1 kgf/cm 2 or bar) Rear: 30 psi (210 kPa, 2.1 kgf/cm 2 or b...

480 6-1. Specifications Fuel information ■ Fuel tank opening for unleaded gasoline To help prevent incorrect fueling, your Toyota has a fuel tank opening thatonly accommodates the special nozzle on unleaded fuel pumps. ■ If your engine knocks ● Consult your Toyota dealer. ● You may occasionally noti...

481 6-1. Specifications 6 Vehicl e sp ecification s ■ Toyota recommends the use of gasoline containing detergent additives ● Toyota recommends the use of gasoline that contains detergent additivesto avoid build-up of engine deposits. ● All gasoline sold in the U.S. contains detergent additives to cl...

482 6-1. Specifications NOTICE ■ Notice on fuel quality ● Do not use improper fuels. If improper fuels are used the engine will bedamaged. ● Do not use leaded gasoline.Leaded gasoline can cause damage to your vehicle’s catalytic converterscausing the emission control system to malfunction. ● Do not ...

483 6-1. Specifications 6 Vehicl e sp ecification s Tire information Typical tire symbols Full-size tire Compact spare tire Tire size ( → P. 486) DOT and Tire Identification Number (TIN) ( → P. 485) Uniform tire quality grading For details, see “Uniform Tire Quality Grading” that follows. Location o...

484 6-1. Specifications Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are thestrands which form the plies in a tire. Radial tires or bias-ply tires A radial tire has “RADIAL” on the sidewall. A tire not marked“RADIAL” is a bias-ply tire. TUBELESS or TUBE ...

485 6-1. Specifications 6 Vehicl e sp ecification s Typical DOT and Tire Identification Number (TIN) DOT symbol * Tire Identification Number(TIN)Tire manufacturer's identifica-tion markTire size codeManufacturer's optional tiretype code (3 or 4 letters)Manufacturing weekManufacturing year * : The DO...

487 6-1. Specifications 6 Vehicl e sp ecification s Tire section names BeadSidewallShoulderTreadBeltInner linerReinforcing rubberCarcassRim linesBead wiresChafer Uniform Tire Quality Grading This information has been prepared in accordance with regulationsissued by the National Highway Traffic Safet...

488 6-1. Specifications ■ Treadwear The treadwear grade is a comparative rating based on the wearrate of the tire when tested under controlled conditions on a speci-fied government test course. For example, a tire graded 150 would wear one and a half (1-1/2)times as well on the government course as ...

489 6-1. Specifications 6 Vehicl e sp ecification s Warning: The temperature grades for this tire are established for atire that is properly inflated and not overloaded.Excessive speed, underinflation, or excessive loading, either sepa-rately or in combination, can cause heat buildup and possible ti...

495 6 Vehicl e sp ecification s 6-2. Customization Customizable features Item Function Default setting Customized setting Smart key system (if equipped) ( → P. 23) Smart key system On Off Operation signal (Emergency flashers) On Off Operation signal(Buzzer) On Off Your vehicle includes a variety of ...

499 6 Vehicl e sp ecification s 6-3. Initialization Items to initialize Item When to initialize Reference Maintenance data After the maintenance is performed. P. 360 Tire pressure warning system (if equipped) When changing the tire size. P. 371 The following items must be initialized for normal syst...

503 7 For owners Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructionsextracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions inEnglish. Utilisation correcte des ceintures...

505 7 For owners Entretien et soin ■ Ceintures de sécurité Nettoyez avec un chiffon ou une éponge humectée d'eausavonneuse tiède. Profitez de l'occasion pour vérifierrégulièrement que les ceintures ne sont pas effilochées, entaillées,ou ne paraissent pas exagérément usées. ■ Ceinture de sécurité ext...

506 SRS airbag instructions for Canadian owners (in French) The following is a French explanation of SRS airbag instructions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbaginstructions in English. Sacs de sécurité gonflables frontaux Sacs...

507 7 For owners Composition du système de sacs de sécurité gonflables Capteurs de sacs desécurité gonflables frontaux Système de classificationde l'occupant du siègepassager avant (ECU etcapteurs) Capteurs de sacs desécurité gonflables latérauxet rideau Sac de sécurité gonflablepassager avant Sacs ...

509 7 For owners ATTENTION ■ Précautions avec les sacs de sécurité gonflables SRS Respectez les précautions suivantes avec les sacs de sécurité gonflables. À défaut, des blessures graves, voire mortelles, pourraient s'ensuivre. ● Le conducteur et tous les passagers à bord du véhicule doivent porter ...

514 ATTENTION ■ Précautions avec les sacs de sécurité gonflables SRS ● Si vous avez des difficultés à respirer après le déploiement d'un sac desécurité gonflable SRS, ouvrez une porte ou une vitre pour faire entrer del'air frais, ou bien descendez du véhicule si cela ne présente pas dedanger. Essuye...

517 Alphabetical index Alphabetical index A/C .................................... 192, 198ABS........................................... 166Air conditioning filter .............. 384Air conditioning system Air conditioning filter ............. 384Automatic air conditioning system......................

528 GAS STATION INFORMATION Hood lock release lever P. 351 Fuel filler door opener P. 75 Tire inflation pressure P. 478 Auxiliary catch lever P. 351 Trunk opener P. 45 Fuel filler door P. 75 Fuel tank capacity (Reference) 13.2 gal. (50 L, 10.9 Imp. gal.) Fuel type Unleaded gasoline only P. 76, 472 C...