Toyota 2011 4Runner- Manuals

24 For your information Main Owner’s Manual Please note that this manual applies to all models and all equipment, includ-ing options. Therefore, you may find some explanations for equipment notinstalled on your vehicle. All specifications provided in this manual are current at the time of printing.H...

26 CAUTION ■ General precautions while driving Driving under the influence: Never drive your vehicle when under the influ-ence of alcohol or drugs that have impaired your ability to operate your vehi-cle. Alcohol and certain drugs delay reaction time, impair judgment andreduce coordination, which co...

27 Symbols used throughout this manual Cautions & Notices Symbols used in illustrations CAUTION This is a warning against something which, if ignored, may cause death orserious injury to people. You are informed about what you must or must not doin order to reduce the risk of death or serious in...

TABLE OF CONTENTS 1 1 Before driving Adjusting and operating features such as door locks, mirrors, and steering column. 2 When driving Driving, stopping and safe-driving information. 3 Interior features Air conditioning and audio systems, as well as other in- terior features for a comfortable drivin...

8 Front turn signal lights and daytime running lights P. 179, 198 Pictorial index Exterior Headlights (low beam) P. 198 Hood P. 494 Windshield wipers P. 205 Moon roof ∗ P. 98 Outside rear view mirrors P. 89 Parking lights and front side marker lights P. 198 Fog lights ∗ P. 204 Headlights (high beam)...

10 CTHPIAS047 Pictorial index Interior SRS front passenger airbag P. 115 SRS driver airbag P. 115 Head restraints P. 76 Front seats P. 61 Rear seats ∗ P. 65 Console box Tissue pocket Pen holder P. 418P. 420P. 421 Seat belts P. 79 Cup holders ∗ P. 423 Armrest P. 448 Cup holders P. 423 Glove box P. 41...

12 CTHPIAS007 B Pictorial index Interior Door lock switch P. 52 Inside door lock button P. 52 Power window switches P. 91 Window lock switch P. 91

14 Pictorial index Instrument panel Headlight switch Turn signal lever Fog light switch ∗ P. 198 P. 179 P. 204 Windshield wiper and washer switch Rear window wiper and washer switch P. 205P. 207 Gauges and meters P. 182 Glove box P. 417 Hood lock release lever P. 494 CTHPIAS059 Accessory meter Compa...

15 CTHPIAS061 A CTHPIAS060 Security indicator light P. 106, 109 Front passenger “AIR BAG ON” and “AIR BAG OFF” indicator P. 130 ∗ : If equipped * 1 : Refer to “Navigation System Owner’s Manual”. Vehicles with a manual air conditioning system Vehicles with an automatic air conditioning system Rear wi...

16 CTHPIAS079 Pictorial index Instrument panel B Vehicles without a smart key system Vehicles with a smart key system Party mode switch P. 359 Audio remote control switches ∗ , * 2 P. 361 Cruise control switch P. 209 Horn P. 181 Talk switch ∗ , * 2 P. 385 Telephone switch ∗ , * 2 P. 385 Engine (igni...

18 Pictorial index Instrument panel D Standard type transmission CTHPIAS084 AUX port P. 360 Cup holders P. 423 Power outlets P. 436 Shift lock override button P. 593 Multi-mode type transmission (2WD) CTHPIAS034 AUX port P. 360 Cup holders P. 423 Power outlets P. 436 Shift lock override button P. 59...

20 CTHPIAS089 Pictorial index Luggage compartment Slide deck ∗ P. 459 Storage compartment ∗ P. 458 Child restraint anchor brackets P. 140 Luggage compartment lights P. 57

22 B Vehicles without third row seats CTHPIAS028 Grocery bag hooks ∗ P. 459 Cargo hooks Cargo net hooks P. 456 P. 457 Power outlets ∗ P. 439 Power outlets P. 436 Cargo net hooks Grocery bag hooks P. 457 P. 459 Pictorial index Luggage compartment

23 CTHPIAS029 B ∗ : If equipped Vehicles with third row seats Storage compartment ∗ P. 458 Power outlets P. 436 Power outlets ∗ P. 439 Cargo net hooks Grocery bag hooks P. 457 P. 459 Cargo hooks Cargo net hooks P. 456P. 457

CUSTOMER E XPERIENCE CENTER 1-800 -331-4331 00505- QRG11-4RUN Printed in U.S.A. 8 /10 10-TCS-03970 414839M1.indd 2 414839M1.indd 2 8/5/10 4:36 PM 8/5/10 4:36 PM QUICK REFERENCE GUIDE 4RUNNER 2 0 1 1 414839M1.indd 1 414839M1.indd 1 8/5/10 4:36 PM 8/5/10 4:36 PM

OVE FEAT SAFEEME IND 1 Visi 2 Prog mor 3 Hom 2011 4Runner ! A word about safe vehicle operations This Quick Reference Guide is a summary of basic vehicle operations. It contains brief descriptions of fundamental operations so you can locate and use the vehicle’s main equipment quickly and easily. Th...

1 Engine maintenance 8 Fuel tank door and cap 6 Hood release 8 Indicator symbols 4-5 Instrument cluster 4 Instrument panel 2-3 Keyless entry 1 6 Smart Key system 1 7 Air Conditioning/Heating 18-19 Audio 20-21 Auto lock functions 1,2 9 Automatic Transmission 9 Bluetooth ® audio 23 Clock 14 Cruise con...

Power outside rearview mirror controls Instrument panel light control Intuitive parking assist switch and indicator 1 Tilt and telescopic steering lock release “RSCA OFF” (Roll Sensing of Curtain shield Airbags “OFF”) switch 120V AC Power outlet ON/OFF switch 1 Windshield wiper de-icer switch 1 Head...

3 OVER VIEW FEATURES/OPERA TIONS SAFETY ANDEMERGENCY FEATURES USB port 1 AUX port Four-wheel drive selector 1 Hood release Steering wheel audio controls 1,2 Voice command button 1,2 Telephone switches 1,2 Ignition switch (standard key) 1 /“ENGINE START STOP” button (Smart Key) 1 Party mode switch Cr...

4 OVERVIEW Low Tire Pressure Warning 1 Open door warning 1 Airbag SRS warning 1 Tachometer Speedometer Display change button Engine coolant temperature Fuel gauge Eco driving indicator zone display Odometer, trip meter and average fuel consumption display Shift position and shift range indicators Vo...

6 OVERVIEW Fuel tank door and cap Pull Turn to open NOTE: Tighten until one click is heard. If the cap is not properly sealed, Check Engine “ ” indicator may illuminate. Keyless entry Locking Unlocking Panic button Push and hold NOTE: If a door is not opened within 60 seconds of unlocking, all doors...

7 OVER VIEW FEATURES/OPERA TIONS SAFETY ANDEMERGENCY FEATURES pen ed, ll Smart Key system (if equipped) Start function Accessories such as the radio will operate. Power ON; the engine not running. All systems OFF. ACCESSORY ON OFF NOTE: Gear shift lever must be in Park and brake pedal depressed. Pus...

8 Windshield and back window washer fluid tank Power steering fluid reservoir Engine oil level dipstick Engine coolant reservoir Engine oil filler cap NOTE: Regularly scheduled maintenance, including oil changes, will help extend the life of your vehicle and maintain performance. Please refer to the...

9 OVER VIEW FEATURES/OPERA TIONS SAFETY ANDEMERGENCY FEATURES l nce. FEATURES/OPERATIONS Automatic Transmission * The ignition/“ENGINE START STOP” switch must be “ON” and the brake pedal depressed to shift from Park. Shift the shift lever to “S” position from “D” position. + : Upshift (push and rele...

10 Four-wheel drive (if equipped) H2 Full-time four-wheel drive models High speed (2WD)High speed (4WD) Shift to “H4” with speed below 50 mph. Low speed (4WD) Stop vehicle, shift to “N” position, then move the lever to “L4.” High speed (center differential locked) Low speed (center differential lock...

11 OVER VIEW FEATURES/OPERA TIONS SAFETY ANDEMERGENCY FEATURES ngth Seat position (forward/backward) Height crank (driver side only) Seatback angle Lumbar support (driver side only) Driver seat: seat position, cushion angle and height Passenger seat: seat position (forward/backward) Seatback angle L...

12 FEATURES/OPERATIONS Seats-Folding down second row seats (1) Push (2) Lower (3) Stow (5) Fold down (4) Pull up Sea (if From From Sea (if (1) R Without third row seats With third row seats Sea Fron row Loc (1) Push (2) Lower (5) Pull up (3) Fold down (7) Fold down (6) Push down (4) Stow 11-4Runner....

13 OVER VIEW FEATURES/OPERA TIONS SAFETY ANDEMERGENCY FEATURES Seats-Stowing third row seats (if equipped) (1) Stow (2) Pull up (3) Pull up (4) Pull up (5) Fold down (1) Stow (2) Pull up (3) Pull up (4) Fold down From inside From outside Seats-Returning third row seats (if equipped) (1) Raise (2) Pu...

14 FEATURES/OPERATIONS Lig Clock H- Hour set M- Minute set Ope Windows Driver side Automatic operation Push the switch completely down or pull it completely up and release to fully open or close. To stop window midway, lightly push the switch in the opposite direction. Window lock switch Deactivates...

15 OVER VIEW FEATURES/OPERA TIONS SAFETY ANDEMERGENCY FEATURES Light control-Instrument panel t set Operating from inside way, ow Window-Back window Operating from outside Window lock switch Open Close Turn and hold Close Open With Smart Key system Without Smart Key system Close Open The VSC OFF but...

16 FEATURES/OPERATIONS Turn signals Front fog lights (if equipped) Front fog lights come on only when the headlights are on low beam. Right turn Turn Lane change Lane change Left turn Lights & turn signals Headlights High beam flasher Low beam Headlights Parking lights High beam Headlights Parki...

17 OVER VIEW FEATURES/OPERA TIONS SAFETY ANDEMERGENCY FEATURES er a er Windshield wipers & washers Rear Front Interval wipe Slow Fast Pull to wash and wipe Adjust frequency* Wash and wipe Wipe Interval wipe Wash and wipe NOTE: Rear wiper and washer operate only when back window is fully closed. ...

18 Air Conditioning/Heating FEATURES/OPERATIONS Temperature selector (driver side) Fan speed Air Conditioning ON/OFF Fresh or recirculated cabin air Temperature selector (front passenger side) “DUAL” button Indicator ON: Separate temperature settings for driver and passenger. Indicator OFF: Synchron...

19 OVER VIEW FEATURES/OPERA TIONS SAFETY ANDEMERGENCY FEATURES dow just Manual Air Conditioning Fan speed Recirculate cabin air (fresh air when OFF) Airflow vent In “ ” mode, use fresh air (“ ” indicator OFF) to reduce window fogging. “ ” mode uses fresh air only. Rear window and outside rearview mi...

20 CD player To scan tracks on a disc Push “SCAN.” Push again to hold selection. CD Changer (Type 3 only) -To load one disc Push “LOAD” and insert one disc. -To load multiple discs Push and hold “LOAD” until you hear a beep. Insert one disc. Shutter will close and then re-open for next disc. To sele...

21 OVER VIEW FEATURES/OPERA TIONS SAFETY ANDEMERGENCY FEATURES ” .” ust nce / p lder “ ” Use to search within the selected audio medium (radio, CD, iPod ® , etc.). “MODE” Push to turn audio ON and select an audio mode. Push and hold to turn audio system OFF. > > Steering wheel controls (if equ...

22 FEATURES/OPERATIONS Bluetooth ® technology allows dialing or receipt of calls without taking hands from the steering wheel or using a cable to connect the compatible telephone and the system.Refer to “Using the hands-free phone system (for cellular phone),” Section 3-4 in the Owner’s Manual for m...

23 OVER VIEW FEATURES/OPERA TIONS SAFETY ANDEMERGENCY FEATURES ible ction nter ton The Bluetooth ® audio system enables you to enjoy music played on a portable digital audio player from the vehicle speaker via wireless communication.Refer to “Bluetooth ® audio system,” Section 3-3 in the Owner’s Man...

24 SAFETY AND EMERGENCY FEATURES If tire pressure becomes critically low on any of the tires, “ ” indicator light will come on. Correctly adjusting tire inflation will turn off the light after a few minutes. If the light does not turn off, have the system checked by your Toyota dealer.Refer to the O...

30 1-1. Key information Keys The following keys are provided with the vehicle. Vehicles without a smart key system Master keys Operating the wireless remotecontrol function ( → P. 47) Valet keyKey number plate Vehicles with a smart key system Electronic keys • Operating the smart key system ( → P. 3...

31 1-1. Key information 1 Before driving Using the mechanical key (vehicles with a smart key system) To take out the mechanical key,push the release button and takethe key out. After using the mechanical key,store it in the electronic key. Carrythe mechanical key together withthe electronic key. If ...

32 1-1. Key information NOTICE ■ To prevent key damage Observe the following: ● Do not drop the keys, subject them to strong shocks or bend them. ● Do not expose the keys to high temperatures for a long period of time. ● Do not get the keys wet or wash them in an ultrasonic washer etc. ● Do not atta...

33 1 Before driving 1-2. Opening, closing and locking the doors Smart key system ∗ ∗ : If equipped The following operations can be performed simply by carrying theelectronic key on your person, for example in your pocket.(The driver should always carry the electronic key.) Locks and unlocks the side...

34 1-2. Opening, closing and locking the doors Unlocking and locking the side doors (front door handles only) Grip the handle to unlock thedoor. Make sure to touch the sensor onthe back of the handle. The doors cannot be unlocked for3 seconds after the doors arelocked. Touch the lock sensor (theinde...

35 1-2. Opening, closing and locking the doors 1 Before driving Unlocking and locking the back door Press the button to unlock thedoor. The back window can be openedby pressing and holding this but-ton. ( → P. 94) Press the button to lock the door. The back window can be closedby pressing and holdin...

40 1-2. Opening, closing and locking the doors ■ Security feature If a door is not opened within approximately 60 seconds after the vehicle isunlocked, the security feature automatically locks the vehicle again. ■ Battery-saving function In the following circumstances, the entry function is disabled...

41 1-2. Opening, closing and locking the doors 1 Before driving ■ Conditions affecting operation The smart key system uses weak radio waves. In the following situations,the communication between the electronic key and the vehicle may beaffected, preventing the smart key system, wireless remote contr...

42 1-2. Opening, closing and locking the doors ■ Note for the entry function ● Even when the electronic key is within the effective range (detectionareas), the system may not operate properly in the following cases: • The electronic key is too close to the window or outside door handle, near the gro...

43 1-2. Opening, closing and locking the doors 1 Before driving ● The lock sensor may not work properly if it comes into contact with ice,snow, mud, etc. Clean the lock sensor and attempt to operate it again, oruse the lock sensor on the lower part of the door handle. ● Fingernails may scrape agains...

44 1-2. Opening, closing and locking the doors ■ Electronic key battery depletion ● The standard battery life is 1 to 2 years. ● As the electronic key always transmits radio waves, the battery willbecome depleted even if the electronic key is not used. The followingsymptoms indicate that the electro...

45 1-2. Opening, closing and locking the doors 1 Before driving ■ When the electronic key battery is fully depleted → P. 528 ■ Customization that can be configured at Toyota dealer Settings (e.g. smart key system) can be changed. (Customizable features → P. 640) ■ Certification for the smart key sys...

46 1-2. Opening, closing and locking the doors CAUTION ■ Caution regarding interference with electronic devices ● People with implanted pacemakers or cardiac defibrillators should keepaway from the smart key system antennas. ( → P. 36) The radio waves may affect the operation of such devices. If nec...

47 1 1-2. Opening, closing and locking the doors Before driving Wireless remote control The wireless remote control can be used to lock and unlock the vehi-cle. Vehicles without a smart key system Locks all the doorsSounds the alarm (press and hold) ( → P. 48) Unlocks all the doors Pressing the butt...

51 1 1-2. Opening, closing and locking the doors Before driving Side doors The vehicle can be locked and unlocked using the entry function,wireless remote control, key or door lock switch. ■ Entry function (vehicles with a smart key system) → P. 33 ■ Wireless remote control → P. 47 ■ Key Turning the...

52 1-2. Opening, closing and locking the doors Locking the doors from the outside without a key Move the inside lock button to the lock position.Close the door. Vehicles without a smart key system The door cannot be locked if either of the front doors is open andthe key is in the engine switch. Vehi...

53 1-2. Opening, closing and locking the doors 1 Before driving Rear door child-protector lock The door cannot be opened frominside the vehicle when the lockis set. These locks can be set to preventchildren from opening the reardoors. Push down on each reardoor switch to lock both reardoors. Automat...

54 1-2. Opening, closing and locking the doors ■ Setting and canceling the functions To switch between setting and canceling, follow the procedurebelow: Vehicles without a smart key system Close all the doors and turn the engine switch to the “ON”position. (Perform step 2 within 20 seconds.) Vehicle...

55 1-2. Opening, closing and locking the doors 1 Before driving When the setting or canceling operation is complete, all the doors arelocked and then unlocked. ■ Using the mechanical key (vehicles with a smart key system) The doors can also be locked and unlocked with the mechanical key. ( → P. 597)...

56 1-2. Opening, closing and locking the doors Back door The back door can be locked/unlocked and opened by the followingprocedures: ■ Locking and unlocking the back door Entry function (vehicles with a smart key system) → P. 34 Wireless remote control → P. 47 Door lock switch → P. 52 Keys (vehicles...

57 1-2. Opening, closing and locking the doors 1 Before driving Rear step bumper The rear step bumper isintended for rear end protectionand easier step-up loading. CTH12AS019 ■ When closing the back door ■ Luggage compartment lights Each luggage compartment light has the following 3 positions: If th...

58 1-2. Opening, closing and locking the doors CAUTION ■ Caution while driving ● Keep the back door closed. If the back door is left open, it may hit nearby objects while driving or lug-gage may be unexpectedly thrown out, causing an accident.In addition, exhaust gases may enter the vehicle, causing...

60 1-2. Opening, closing and locking the doors NOTICE ■ To prevent damage to the back door components Do not allow more than one person to get on the rear step bumper at a time. ■ Back door damper stays The back door is equipped with damper stays that hold the back door inplace. Observe the followin...

61 1 Before driving 1-3. Adjustable components (seats, mirrors, steering wheel) Front seats Manual seat Seat position adjustmentleverVertical height adjustmentlever (driver’s side only)Seatback angle adjustmentleverLumber support adjustmentswitch (driver’s side only) CTH13AS055

63 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving ■ The auto away function for exiting the driver seat If the seat is already close to the rearmost position, the auto away functionmay not operate when the driver exits the vehicle. ■ Active head restraints Even small for...

64 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ Seat adjustment ● To reduce the risk of sliding under the lap belt during a collision, do notrecline the seat more than necessary.If the seat is too reclined, the lap belt may slide past the hips and applyrestraint forces direc...

65 1 1-3. Adjustable components (seats, mirrors, steering wheel) Before driving Rear seats Vehicles without third row seats ■ Rear seat Pull up the seatback angleadjustment lever until the lockis released. CTH13AS081

66 1-3. Adjustable components (seats, mirrors, steering wheel) Vehicles with third row seats ■ Second row seats Seat position adjustmentleverSeatback angle adjustmentlever ■ Third row seats The third row seats do not have a seat adjustment function. CTH13AS053

67 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving Folding down the rear seats (vehicles without third row seats) ■ Before folding down the rear seats Adjust the head restraints to thedownmost position. Fold down the head restraints. When returning the headrestraints to ...

69 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving Folding down the second row seats (vehicles with third row seats) ■ Before folding down the second row seats Adjust the head restraints to thedownmost position. Stow the second row seat beltbuckles. CTH13AS045 STEP 1 CTH...

71 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving Moving a second row seat for access to the third row seats (vehicleswith third row seats) ■ Getting in the vehicle (right side only) Pull up the lever and fold downthe seatback. The seat will slideforward. Move the seat ...

73 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving Pull the lever to unlock the seat-back and then fold the seatbackdown. From outside Pull the strap to fold down thehead restraint. Pull the lever up. The seat cushion will slide back-ward and the seatback will beunlocked...

74 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Returning the third row seats As the seat cushions cannot be pulled forward from outside, thisoperation can only be performed from inside. Raise the seatbacks to their orig-inal positions. Make sure they are lockedsecurely. Pull the se...

75 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving CAUTION ■ When folding the rear seatbacks down Observe the following precautions. Failure to do so may result in death orserious injury. ● Do not fold the seatbacks down while driving. ● Stop the vehicle on level ground,...

76 1-3. Adjustable components (seats, mirrors, steering wheel) Head restraints Head restraints are provided for all seats. ■ Adjusting the head restraints Front and second seats Up Pull the head restraints up. Down Push the head restraint downwhile pushing the lock releasebutton. ■ Folding the head ...

77 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving ■ Removing the head restraints (except third row seats) ■ Installing the head restraints (except third row seats) ■ Adjusting the height of the head restraints ■ Adjusting the second center seat head restraint Always rai...

78 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ Head restraint precautions Observe the following precautions regarding the head restraints. Failure todo so may result in death or serious injury. ● Use the head restraints designed for each respective seat. ● Adjust the head r...

79 1 1-3. Adjustable components (seats, mirrors, steering wheel) Before driving Seat belts Make sure that all occupants are wearing their seat belts before driv-ing the vehicle. ■ Correct use of the seat belts ● Extend the shoulder belt sothat it comes fully over theshoulder, but does notcome into c...

80 1-3. Adjustable components (seats, mirrors, steering wheel) Seat belt pretensioners (front seats) The pretensioner helps the seatbelt to quickly restrain the occu-pant by retracting the seat beltwhen the vehicle is subjected tocertain types of severe frontaland side collision or a vehiclerollover...

81 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving ■ Emergency locking retractor (ELR) The retractor will lock the belt during a sudden stop or on impact. It may alsolock if you lean forward too quickly. A slow, easy motion will allow the belt toextend so that you can mo...

83 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving CAUTION ■ Wearing a seat belt Observe the following precautions to reduce the risk of injury in the event ofsudden braking, sudden swerving or an accident.Failure to do so may cause death or serious injury. ● Ensure that...

84 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ Child restraint lock function belt precaution Do not allow children to play with the child restraint lock function belt. If thebelt becomes twisted around a child’s neck, it will not be possible to pull thebelt out leading to c...

85 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving NOTICE ■ When using a seat belt extender When releasing the seat belt, press on the buckle release button on theextender, not on the seat belt.This helps prevent damage to the vehicle interior and the extender itself.

86 1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel CAUTION ■ Caution while driving Do not adjust the steering wheel while driving.Doing so may cause the driver to mishandle the vehicle and cause an acci-dent, resulting in death or serious injury. ■ After adjusting the stee...

87 1 1-3. Adjustable components (seats, mirrors, steering wheel) Before driving Inside rear view mirror Glare from the headlights of vehicles behind can be reduced byusing the following functions: Manual anti-glare inside rear view mirror (if equipped) Normal positionAnti-glare position Auto anti-gl...

88 1-3. Adjustable components (seats, mirrors, steering wheel) Adjusting the height of rear view mirror Adjust the height of the rear viewmirror by moving it up and down. CTH13AS074 ■ To prevent sensor error (vehicles with auto anti-glare inside rear viewmirror) CAUTION ■ Caution while driving Do no...

89 1 1-3. Adjustable components (seats, mirrors, steering wheel) Before driving Outside rear view mirrors Folding the mirrors Push the mirror back in the direc-tion of the vehicle's rear. Mirror angle can be adjusted using the switch. To select a mirror to adjust,press the switch. LeftRight To adjus...

90 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Mirror angle can be adjusted when Vehicles without a smart key system The engine switch is in the “ACC” or “ON” position. Vehicles with a smart key system The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ONmode. ■ When the mi...

91 1 Before driving 1-4. Opening and closing the windows and moon roof Power windows Window lock switch Press the switch down to lockthe passenger window switchesand back window switch. Use this switch to prevent chil-dren from accidentally opening orclosing a passenger window andback window. The po...

93 1-4. Opening and closing the windows and moon roof 1 Before driving CAUTION ■ Closing the windows Observe the following precautions. Failure to do so may result in death or serious injury. ● Check to make sure that all passengers do not have any part of their bodyin a position where it could be c...

94 1-4. Opening and closing the windows and moon roof Power back window The power back window can be opened and closed using the switchor key. From inside the vehicle ClosingOne-touch closing * OpeningOne-touch opening * * : Pressing the switch in the opposite direction will stopwindow travel partwa...

95 1-4. Opening and closing the windows and moon roof 1 Before driving ■ The power back window can be operated from inside the vehicle when Vehicles without a smart key system The engine switch is in the “ON” position. Vehicles with a smart key system The “ENGINE START STOP” switch is in IGNITION ON...

98 1-4. Opening and closing the windows and moon roof Moon roof ∗ ∗ : If equipped Use the overhead switches to open and close the moon roof and tiltit up and down. ■ Opening and closing Opens the moon roof * Closes the moon roof * * : Lightly press the switch in either direction to stop themoon roof...

100 1-4. Opening and closing the windows and moon roof ■ When the moon roof does not close normally Perform the following procedure: ● If the moon roof closes but then re-opens slightly Stop the vehicle. Press and hold the “SLIDE (open/close)” switch in the close posi-tion.* 1 The moon roof will clo...

101 1-4. Opening and closing the windows and moon roof 1 Before driving ■ Moon roof open reminder function Vehicles without a smart key system An alarm will sound when the driver’s door is opened with the moon roof notfully closed and the engine switch off. Vehicles with a smart key system An alarm ...

102 1-5. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap: ■ Before refueling the vehicleVehicles without a smart key system Turn the engine switch off and ensure that all the doors and win-dows are closed. Vehicles with a smart key system Turn the “ENGINE ST...

103 1-5. Refueling 1 Before driving Closing the fuel tank cap After refueling, turn the fuel tankcap until you hear a click. Oncethe cap is released, it will turnslightly in the opposite direction. Hang the fuel tank cap on theback of the fuel filler door. CTH15AS003 STEP 3 CTH15AS004

104 1-5. Refueling CAUTION ■ When refueling the vehicle Observe the following precautions while refueling the vehicle. Failure to doso may result in death or serious injury. ● After exiting the vehicle and before opening the fuel door, touch anunpainted metal surface to discharge any static electric...

105 1-5. Refueling 1 Before driving NOTICE ■ Refueling Do not spill fuel during refueling. Doing so may damage the vehicle, such as causing the emission controlsystem to operate abnormally or damaging fuel system components or thevehicle's painted surface.

106 1-6. Theft deterrent system Engine immobilizer system The vehicle’s keys have built-in transponder chips that prevent theengine from starting if a key has not been previously registered inthe vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehicle. Vehicle...

107 1-6. Theft deterrent system 1 Before driving ■ System maintenance The vehicle has a maintenance-free type engine immobilizer system. ■ Conditions that may cause the system to malfunction ● If the grip portion of the key is in contact with a metallic object ● If the key is in close proximity to o...

108 1-6. Theft deterrent system CAUTION ■ Certifications for the immobilizer system Changes or modifications not expressly approved by the party responsiblefor compliance could void the user’s authority to operate the equipment. NOTICE ■ To ensure the system operates correctly Do not modify or remov...

109 1 1-6. Theft deterrent system Before driving Alarm ∗ ∗ : If equipped The system sounds the alarm and flashes the lights when forcedentry is detected. ■ Triggering of the alarm The alarm is triggered in the following situations when the alarmis set: ● A locked door is unlocked or opened in any wa...

110 1-6. Theft deterrent system ■ System maintenance The vehicle has a maintenance-free type alarm system. ■ Items to check before locking the vehicle To prevent unexpected triggering of the alarm and vehicle theft, make sureof the following: ● Nobody is in the vehicle. ● The windows and moon roof a...

113 1 Before driving 1-7. Safety information Correct driving posture Drive with a good posture as follows: Sit upright and well back inthe seat. ( → P. 61) Adjust the position of theseat forward or backward toensure the pedals can bereached and easilydepressed to the extentrequired. ( → P. 61) Adjus...

114 1-7. Safety information CAUTION ■ While driving ● Do not adjust the position of the driver’s seat.Doing so could cause the driver to lose control of the vehicle. ● Do not place a cushion between the driver or passenger and the seatback.A cushion may prevent correct posture from being achieved, a...

115 1 1-7. Safety information Before driving SRS airbags The SRS airbags inflate when the vehicle is subjected to certaintypes of severe impacts that may cause significant injury to theoccupants. They work together with the seat belts to help reduce therisk of death or serious injury. SRS front airb...

116 1-7. Safety information SRS airbag system components Side airbags“AIR BAG ON” and “AIR BAGOFF” indicator lightsCurtain shield airbagsFront passenger airbagKnee airbagsSide and curtain shield airbagsensorsFront airbag sensorsAirbag sensor assemblyFront passenger’s seat beltbuckle switch Occupant ...

121 1-7. Safety information 1 Before driving ■ When to contact your Toyota dealer In the following cases, contact your Toyota dealer as soon as possible. ● Any of the SRS airbags have been inflated. ● The front of the vehicle is damaged ordeformed, or was involved in an acci-dent that was not severe...

122 1-7. Safety information CAUTION ■ SRS airbag precautions Observe the following precautions regarding the SRS airbags. Failure to do so may cause death or serious injury. ● The driver and all passengers in the vehicle must wear their seat beltsproperly.The SRS airbags are supplemental devices to ...

127 1-7. Safety information 1 Before driving CAUTION ■ Modification and disposal of SRS airbag system components Do not dispose of your vehicle or perform any of the following modificationswithout consulting your Toyota dealer. The SRS airbags may malfunction ordeploy (inflate) accidentally, causing...

128 1-7. Safety information Deactivating the curtain shield airbags in a vehicle rollover On/off (hold for a few seconds) Vehicles without a smart key sys-tem: The “RSCA OFF” indicatorturns on. (only when the engineswitch is in the “ON” position). The roll sensing function for thecurtain shield airb...

129 1-7. Safety information 1 Before driving CAUTION ■ During normal driving Make sure the “RSCA OFF” indicator light is not turned on. If it is left on, thecurtain shield airbags will not activate in the event of an accident, which maycause death or serious injury.

130 1-7. Safety information Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classifica-tion system. This system detects the conditions of the front passen-ger seat and activates or deactivates the devices for the frontpassenger. SRS warning lig...

131 1-7. Safety information 1 Before driving Condition and operation in the front passenger occupant classi-fication system ■ Adult * 1 ■ Child * 3 or child restraint system * 4 Indicator/ warning light “AIR BAG ON” and “AIR BAG OFF” indicator lights “AIR BAG ON” SRS warning light Off Front passenge...

132 1-7. Safety information ■ Unoccupied Indicator/ warning light “AIR BAG ON” and “AIR BAG OFF” indicator lights Not illumi- nated SRS warning light Off Front passenger’s seat belt reminder light Devices Front passenger airbag Deactivated Side airbag on the front passenger seat Activated Curtain sh...

133 1-7. Safety information 1 Before driving ■ There is a malfunction in the system * 1 : The system judges a person of adult size as an adult. When a smaller adult sits in the front passenger seat, the system may rec-ognize him/her as a child depending on his/her physique and pos-ture. * 2 : In the...

134 1-7. Safety information CAUTION ■ Front passenger occupant classification system precautions Observe the following precautions regarding the front passenger occupantclassification system. Failure to do so may cause death or serious injury. ● Wear the seat belt properly. ● Make sure the front pas...

135 1-7. Safety information 1 Before driving CAUTION ■ Front passenger occupant classification system precautions ● If an adult sits in the front passenger seat, the “AIR BAG ON” indicatorlight is illuminated. If the “AIR BAG OFF” indicator is illuminated, ask thepassenger to sit up straight, well b...

136 1-7. Safety information Child restraint systems Points to remember Studies have shown that installing a child restraint on a rear seat ismuch safer than installing one on the front passenger seat. ● Choose a child restraint system that suits your vehicle and isappropriate to the age and size of ...

137 1-7. Safety information 1 Before driving Forward facing — Convertible seat Booster seat CTH17AS144 CTH17AS112 ■ Selecting an appropriate child restraint system ● Use a child restraint system appropriate for the child until the childbecomes large enough to properly wear the vehicle’s seat belt. ●...

138 1-7. Safety information CAUTION ■ Child restraint precautions ● For effective protection in automobile accidents and sudden stops, a childmust be properly restrained, using a seat belt or child restraint systemdepending on the age and size of the child. Holding a child in your arms isnot a subst...

140 1-7. Safety information Installing child restraints Follow the child restraint system manufacturer’s instructions. Firmlysecure the child restraints using the LATCH anchors or a seat belt.Attach the top tether strap when installing a child restraint. The lap/shoulder belt can be used if your chi...

145 1-7. Safety information 1 Before driving Installing child restraints using a seat belt (child restraint lockfunction belt) ■ Rear facing ⎯ Infant seat/convertible seat Place the child restraint systemon the rear seat facing the rearof the vehicle. Run the seat belt through thechild restraint sys...

147 1-7. Safety information 1 Before driving While pushing the child restraintsystem into the rear seat, allowthe shoulder belt to retract untilthe child restraint system issecurely in place. After the shoulder belt hasretracted to a point where there isno slack in the belt, pull the belt tocheck th...

149 1-7. Safety information 1 Before driving Open the anchor bracket cover,latch the hook onto the anchorbracket and tighten the top tetherstrap. Make sure the top tether strap issecurely latched. Replace the head restraint. CTH17AS071 STEP 2 CTH17AS130 STEP 3 ■ Laws and regulations pertaining to an...

150 1-7. Safety information CAUTION ■ When installing a booster seat To prevent the belt from going into ALR lock mode, do not fully extend theshoulder belt. ALR mode causes the belt to tighten only. This could causeinjury or discomfort to the child. ( → P. 81) ■ When installing a child restraint sy...

151 1-7. Safety information 1 Before driving CAUTION ■ When installing a child restraint system ● Vehicles with third row seats: When using the LATCH anchors for a childrestraint system, move the seat as far back as possible, with the seatbackclose to the child restraint system. ● When a booster sea...

152 1-7. Safety information CAUTION ■ Do not use a seat belt extender If a seat belt extender is used when installing a child restraint system, theseat belt will not securely hold the child restraint system, which could causedeath or serious injury to the child or other passengers in the event of su...

154 2-1. Driving procedures Driving the vehicle The following procedures should be observed to ensure safe driv-ing: ■ Starting the engine → P. 164, 167 ■ Driving With the brake pedal depressed, shift the shift lever to D.( → P. 173) Release the parking brake. ( → P. 180) Gradually release the brake...

155 2-1. Driving procedures 2 When drivin g Starting off on a steep uphill Make sure that the parking brake is set and shift the shift leverto D.Gently depress the accelerator pedal.Release the parking brake. ■ Driving in the rain ● Drive carefully when it is raining, because visibility will be redu...

156 2-1. Driving procedures ■ Operating your vehicle in a foreign country Comply with the relevant vehicle registration laws and confirm the availabilityof the correct fuel. ( → P. 615) CAUTION ■ When starting the vehicle Always keep your foot on the brake pedal while stopped with the engine run-nin...

158 2-1. Driving procedures CAUTION ■ When driving on slippery road surfaces ● Sudden braking, acceleration and steering may cause tire slippage andreduce your ability to control the vehicle, resulting in an accident. ● Sudden changes in engine speed, such as engine braking caused by up-shifting or ...

159 2-1. Driving procedures 2 When drivin g CAUTION ■ When the vehicle is stopped ● Do not race the engine.If the vehicle is in any gear other than P or N, the vehicle may acceleratesuddenly and unexpectedly, causing an accident. ● Do not leave the vehicle with the engine running for a long time. If...

160 2-1. Driving procedures CAUTION ● Do not leave a door or window open if the curved glass is coated with ametallized film such as a silver-colored one. Reflected sunlight may causethe glass to act as a lens, causing a fire. ● Always apply the parking brake, shift the shift lever to P, stop the en...

161 2-1. Driving procedures 2 When drivin g CAUTION ■ When taking a nap in the vehicle Always turn the engine off. Otherwise, if you accidentally move the shift leveror depress the accelerator pedal, this could cause an accident or fire due toengine overheating. Additionally, if the vehicle is parke...

162 2-1. Driving procedures NOTICE ■ When driving the vehicle ● Do not depress the accelerator and brake pedals at the same time duringdriving. If the brake pedal is depressed while driving with the acceleratorpedal depressed, driving torque may be restrained. ● Do not use the accelerator pedal or d...

163 2-1. Driving procedures 2 When drivin g NOTICE ■ When encountering flooded roads Do not drive on a road that has flooded after heavy rain etc. Doing so maycause the following serious damage to the vehicle: ● Engine stalling ● Short in electrical components ● Engine damage caused by water immersi...

164 2-1. Driving procedures Engine (ignition) switch (vehicles without a smart key system) ■ Starting the engine Check that the parking brake is set.Check that the shift lever is set in P.Firmly depress the brake pedal.Turn the engine switch to the “START” position to start theengine. ■ Changing the...

165 2-1. Driving procedures 2 When drivin g ■ Turning the key from “ACC” to “LOCK” Shift the shift lever to P. ■ If the engine does not start The engine immobilizer system may not have been deactivated. ( → P. 106) ■ When the steering lock cannot be released ■ Key reminder function A buzzer sounds i...

166 2-1. Driving procedures CAUTION ■ When starting the engine Always start the engine while sitting in the driver's seat. Do not depress theaccelerator pedal while starting the engine under any circumstances.Doing so may cause an accident resulting in death or serious injury. ■ Caution when driving...

168 2-1. Driving procedures ■ Changing “ENGINE START STOP” switch modes Modes can be changed by pressing the “ENGINE START STOP”switch with brake pedal released. (The mode changes each timethe switch is pressed.) Off* The emergency flashers canbe used. ACCESSORY mode Some electrical componentssuch a...

173 2-1. Driving procedures 2 When drivin g Automatic transmission Select a shift position appropriate for the driving conditions. ■ Shifting the shift lever Standard type While the engine switch is in the “ON” position, move theshift lever with the brake pedal depressed. When shifting the shift lev...

175 2-1. Driving procedures 2 When drivin g ■ Shift position purpose * 1 : To improve fuel efficiency and reduce noises, set the shift lever in the D position for normal driving. * 2 : Selecting shift ranges using S mode restricts the upper limit of the pos- sible gear ranges, controls engine brakin...

176 2-1. Driving procedures Changing shift ranges in S mode (multi-mode type) When the shift lever is in the S position, the shift lever can be oper-ated as follows: Non-Optitron type meter For upshiftingFor downshifting Optitron type meter For upshiftingFor downshifting The initial shift range in S...

177 2-1. Driving procedures 2 When drivin g ■ Downshifting restrictions (standard type) The maximum allowable speeds are as follows. ■ S mode (multi-mode type) When the shift range is “3” or lower, holding the shift lever toward “+” setsthe shift range to “5”. ■ AI-SHIFT AI-SHIFT automatically selec...

178 2-1. Driving procedures ■ Downshift restriction warning buzzer (S mode in multi-mode type) To help ensure safety and driving performance, downshifting operation maysometimes be restricted. In some circumstances, downshifting may not bepossible even when the shift lever is operated. (A buzzer wil...

179 2-1. Driving procedures 2 When drivin g Turn signal lever ■ Turn signals can be operated when Vehicles without a smart key system: The engine switch is in the “ON” posi-tion. Vehicles with a smart key system: The “ENGINE START STOP” switch is inIGNITION ON mode. ■ If the indicator flashes faster...

180 2-1. Driving procedures Parking brake ■ Usage in winter time See “Winter driving tips” for parking brake usage in winter time. ( → P. 275) NOTICE ■ Before driving Fully release the parking brake.Driving the vehicle with the parking brake set will lead to brake componentsoverheating, which may af...

181 2-1. Driving procedures 2 When drivin g Horn ■ After adjusting the steering wheel Make sure that the steering wheel is securely locked.The horn may not sound if the steering wheel is not securely locked. ( → P. 86) To sound the horn, press on orclose to the mark. CTH21AS022

182 2-2. Instrument cluster Gauges and meters Non-Optitron type meters Optitron type meters

184 2-2. Instrument cluster Switching the display Items displayed can be switchedby pressing the display changebutton. ■ Odometer Displays the total distance the vehicle has been driven. ■ Trip meter Displays the distance the vehicle has been driven since the meterwas last reset. Trip meters “A” and...

185 2-2. Instrument cluster 2 When drivin g ■ Eco Driving Indicator and average fuel consumption Non-Optitron type meter Eco Driving Indicator Light During Eco-friendly acceleration(Eco driving), Eco Driving Indica-tor Light will turn on. Eco Driving Indicator ZoneDisplay Suggests Zone of Eco drivin...

186 2-2. Instrument cluster Optitron type meter Eco Driving Indicator Light During Eco-friendly acceleration(Eco driving), Eco Driving Indica-tor Light will turn on. Eco Driving Indicator ZoneDisplay Suggests Zone of Eco drivingwith current Eco driving ratiobased on acceleration. Zone of Eco driving...

187 2-2. Instrument cluster 2 When drivin g ■ Eco Driving Indicator Light customization Non-Optitron type meter Eco Driving Indicator Light canbe activated or deactivated bypressing and holding the displaychange button. Optitron type meter Eco Driving Indicator Light canbe activated or deactivated b...

188 2-2. Instrument cluster ■ The meters and display illuminate when (Optitron type meter) Vehicles without a smart key system: The engine switch is in the “ON” position. Vehicles with a smart key system: The “ENGINE START STOP” switch is in IGNITION ON mode. ■ Eco Driving Indicator operates when Th...

189 2-2. Instrument cluster 2 When drivin g Indicators and warning lights The indicator and warning lights on the instrument cluster and cen-ter panel inform the driver of the status of the vehicle’s various sys-tems. Instrument cluster (non-Optitron type meter) Instrument cluster (Optitron type met...

191 2-2. Instrument cluster 2 When drivin g ■ Indicators The indicators inform the driver of the operating state of thevehicle’s various systems. Turn signal indicator ( → P. 179) (Canada) “TRC OFF” indicator ( → P. 255) Headlight high beam indicator ( → P. 202) Roll sensing of curtain shield airbag...

192 2-2. Instrument cluster * : These lights turn on when the “ENGINE START STOP” switch is turned to IGNITION ON mode (vehicles with a smart key system) or theengine switch is turned to the “ON” position (vehicles without a smartkey system) to indicate that a system check is being performed. Theywi...

193 2-2. Instrument cluster 2 When drivin g CAUTION ■ If a safety system warning light does not come on Should a safety system light such as the ABS or SRS warning light not comeon when you start the engine, this could mean that these systems are notavailable to help protect you in an accident, whic...

194 2-2. Instrument cluster Accessory meter The accessory meter presents the driver with a variety of driving-related data including the current outside air temperature. “MODE/ ” button “SET/ ” button Trip information ( → P. 195) Displays driving range and average fuel consumption Outside temperatur...

195 2-2. Instrument cluster 2 When drivin g Trip information Items displayed can be switched by pressing the “MODE/ ” button. ■ Driving range ■ Average fuel consumption (vehicles without Multi-terrain Select) (vehicles with Multi-terrain Select) Displays the estimated maximum distance thatcan be dri...

196 2-2. Instrument cluster Accessory meter light control The daytime brightness of the accessory meter can be adjusted. Turn the headlight switch off.Press and hold the “MODE/ ” button. Press the “MODE/ ” or “SET/ ” button. Vehicles without Multi-terrain Select Vehicles with Multi-terrain Select Pr...

197 2-2. Instrument cluster 2 When drivin g ■ When the average fuel consumption is reset The average fuel consumption displayed on the instrument cluster and “PastRecord” screen of the navigation system (if equipped) will be reset at thesame time. ■ Adjusting the brightness of the accessory meter ● ...

198 2-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. Turning the end of the lever turns on the lights as follows: Type A The daytime runninglights turn on.The side marker, park-ing, tail, license plate,daytime running lightsand instrumen...

200 2-3. Operating the lights and wipers Type C The daytime runninglights turn on.The side marker, park-ing, tail, license plateand instrument panellights turn on. The headlights and allthe lights listed aboveturn on. CTH23AS030

201 2-3. Operating the lights and wipers 2 When drivin g Type D The daytime runninglights turn on.The headlights, park-ing lights, daytime run-ning lights and so onturn on and off auto-matically (when the“ENGINE STARTSTOP” switch is inIGNITION ON mode).The side marker, park-ing, tail, license plate,...

202 2-3. Operating the lights and wipers Turning on the high beam headlights With the headlights on, pushthe lever away from you toturn on the high beams. Pull the lever toward you to thecenter position to turn the highbeams off. Pull the lever toward you andrelease it to flash the highbeams once. Y...

204 2-3. Operating the lights and wipers Fog light switch ∗ ■ Fog lights can be used when The headlights are on in low beam. The fog lights secure excellent visibility in difficult driving condi-tions, such as in rain and fog. Turns the front fog lights offTurns the front fog lights on CTH23AS010 ∗ ...

205 2-3. Operating the lights and wipers 2 When drivin g Windshield wipers and washer When intermittent windshield wiper operation is selected, the wiperinterval can be adjusted. The wiper operation is selected by moving the lever as follows. Intermittent windshieldwiper operationLow speed windshiel...

206 2-3. Operating the lights and wipers ■ The windshield wipers and washer can be operated when Vehicles without a smart key system: The engine switch is in the “ON” posi-tion. Vehicles with a smart key system: The “ENGINE START STOP” switch is inIGNITION ON mode. ■ If no windshield washer fluid sp...

207 2-3. Operating the lights and wipers 2 When drivin g Rear window wiper and washer ■ The rear window wiper and washer can be operated when ● Vehicles without a smart key system: The engine switch is in the “ON”position. Vehicles with a smart key system: The “ENGINE START STOP” switch isin IGNITIO...

208 2-3. Operating the lights and wipers ■ When the rear window wiper and washer switch is turned off The rear wiper will stop operation, and return to the retracted position afterapproximately 3 seconds.However, if the engine switch is turned to the “ACC” or “LOCK” position(vehicles without a smart...

209 2 When drivin g 2-4. Using other driving systems Cruise control Use cruise control to maintain a set speed without depressing theaccelerator pedal. IndicatorsCruise control switch ■ Setting the vehicle speed Press the “ON-OFF” button toactivate the cruise control. Press the button again todeacti...

212 2-4. Using other driving systems CAUTION ■ To avoid operating the cruise control by mistake Switch the cruise control off using the “ON-OFF” button when not in use. ■ Situations unsuitable for cruise control Do not use cruise control in any of the following situations.Doing so may result in loss...

213 2-4. Using other driving systems 2 When drivin g Intuitive parking assist ∗ The distance from your vehicle to nearby obstacles when parallelparking or maneuvering into a garage is measured by the sensorsand communicated via an indicator and a buzzer. Always check thesurrounding area when using t...

214 2-4. Using other driving systems The indicator and buzzer When a sensor detects an obstacle, the direction of the obstacle isindicated and the buzzer sounds. ■ Sensor operation and distance to an obstacle The system operates when the vehicle approaches an obstacle, asshown by the following table...

215 2-4. Using other driving systems 2 When drivin g Detection range of the sensors Approximately 1.6 ft. (50 cm)Approximately 4.9 ft. (150 cm) The diagram shows the detectionrange of the sensors. Note thatthe sensors cannot detect obsta-cles that are extremely close tothe vehicle. The range of the ...

216 2-4. Using other driving systems ■ Sensor detection information ● Certain vehicle conditions and the surrounding environment may affectthe ability of a sensor to correctly detect an obstacle. Particular instanceswhere this may occur are listed below. • There is dirt, snow or ice on a sensor.• A ...

221 2-4. Using other driving systems 2 When drivin g ■ Smear effect ■ Flicker effect When the camera is used under fluorescent light, sodium lights, or mercurylights etc., the lights and the illuminated areas may appear to flicker. ● Water droplets are on the camera lensor humidity is high, such as ...

222 2-4. Using other driving systems CAUTION ■ When using the rear view monitor system Observe the following precautions to avoid an accident that could result indeath or serious injuries: ● Never depend solely on the monitor system when reversing. ● Always check visually and with the mirrors to con...

223 2-4. Using other driving systems 2 When drivin g Four-wheel drive system (part-time 4WD models) Use the front-wheel drive control lever to select the following trans-fer modes: The four-wheel drive indicator comes on when H4, N or L4 mode isselected. H2 (high speed position, two-wheel drive) Nor...

224 2-4. Using other driving systems Shifting between H2 and H4 ■ Shifting from H2 to H4 Reduce vehicle speed to less than 50 mph (80 km/h).Shift the front-wheel drive control lever to H4. The four-wheel drive indicator will turn on. ■ Shifting from H4 to H2 Shift the front-wheel drive control lever...

226 2-4. Using other driving systems Four-wheel drive system (full-time 4WD models) Use the four-wheel drive control switch to select the following trans-fer modes: H4F (high speed position) Normal driving on all types of roads. H4L (high speed position, center differential locked) For when your veh...

228 2-4. Using other driving systems ■ Shifting from L4L to H4L Stop the vehicle completely.Shift the shift lever to N. Push the “UNLOCK” button andturn the four-wheel drive controlswitch to H4L. Maintain this condition until thelow speed four-wheel drive indi-cator goes off. STEP 1 STEP 2 CTH24AS05...

229 2-4. Using other driving systems 2 When drivin g ■ If the low speed four-wheel drive indicator continues to flash and abuzzer sounds The shift lever is not in N and/or the vehicle is moving. Stop the vehicle com-pletely, shift the shift lever to N and make sure that the indicator stops flash-ing...

230 2-4. Using other driving systems Active traction control system ∗ The active traction control system automatically helps prevent thespinning of 4 wheels when the vehicle is started or accelerated onslippery road surfaces. ■ System operation Part-time 4WD models:Stop the vehicle, shift the shift ...

231 2-4. Using other driving systems 2 When drivin g When the active traction control system is operating If all wheels spin, the slip indica-tor flashes to indicate that theactive traction control systemhas been engaged. CTH24AS047 ■ When the rear differential is locked (vehicles with a rear differ...

233 2-4. Using other driving systems 2 When drivin g When the AUTO LSD system is operating If the rear wheels spin, the slipindicator flashes to indicate thatthe AUTO LSD system has con-trolled the spinning of the rearwheels. CTH24AS047 ■ If the engine is turned off and restarted The AUTO LSD system...

234 2-4. Using other driving systems NOTICE ■ Activating while driving Never activate the AUTO LSD system if the wheel is slipping.Stop the slipping or spinning before activating.

235 2-4. Using other driving systems 2 When drivin g Rear differential lock system ∗ The rear differential lock system is provided for use only when wheelspinning occurs in a ditch or on a slippery or rugged surface. The rear differential lock system is effective in case one of the rearwheels is spi...

236 2-4. Using other driving systems Using the rear differential lock system Before using the rear differential lock system:Stop the vehicle, shift the shift lever to N and shift the front-wheel drive control lever into L4 to see if this is sufficient. Ifthis has no effect, additionally use the rear...

237 2-4. Using other driving systems 2 When drivin g CAUTION ■ To avoid an accident ● Do not use the rear differential lock system except when wheel spinningoccurs in a ditch or on a slippery or rugged surface. Large steering effortand careful cornering control will be required. ● Do not lock the re...

238 2-4. Using other driving systems Downhill assist control system ∗ With the downhill assist control system, the vehicle is able todescend a steep hill while maintaining a constant low speed of about3 mph (5 km/h) without brake pedal operation. ■ Activating the system The system will activate when...

239 2-4. Using other driving systems 2 When drivin g While the downhill assist control system is operating The slip indicator will flash toindicate that the downhill assistcontrol system is operating, andthe stop lights and high mountedstoplight will turn on. CTH24AS047 ■ Operating tips The system w...

240 2-4. Using other driving systems ■ System malfunction In case of a system malfunction, the following may occur: ● The downhill assist control system indicator flashes in a situation otherthan those listed above. ● The downhill assist control system indicator does not come on when theengine switc...

241 2-4. Using other driving systems 2 When drivin g Crawl Control ∗ Allows travel on extremely rough off-road surfaces at a fixed lowspeed without pressing the accelerator or brake pedal. Minimizesloss of traction or vehicle slip when driving on slippery road sur-faces, allowing for stable driving....

242 2-4. Using other driving systems ■ Crawl Control can be operated when ● The engine is running. ● The shift lever is in any position other than P or N. ● The front-wheel drive control lever is in L4. ● The driver’s door is closed. ■ Speed modes The following table showssome typical terrains and t...

243 2-4. Using other driving systems 2 When drivin g ■ Crawl Control is temporarily canceled when Vehicle speed exceeds 15 mph (25 km/h). The Crawl Control indicatorflashes until the vehicle speed is reduced. ■ Automatic system cancelation In the following situations, the system will cease operation...

244 2-4. Using other driving systems CAUTION ■ When using Crawl Control ● Do not overly rely on Crawl Control. This function does not extend thevehicle’s performance limitations. Always check the terrain thoroughly anddrive safely. ● The recommended speed modes for the listed terrains ( → P. 242) ar...

246 2-4. Using other driving systems ■ Multi-terrain Select modes Symbol Mode MUD & SAND LOOSE ROCK MOGUL ROCK

247 2-4. Using other driving systems 2 When drivin g The following table shows some typical terrains and the recom-mended Multi-terrain Select modes. ■ Multi-terrain Select can be activated when ● Vehicle speed is approximately 7 mph (12 km/h) or less. ● MUD & SAND: The front-wheel drive control...

248 2-4. Using other driving systems Selecting modes Press the “ON/OFF” switch. All the mode indicators will comeon and then go off except the indi-cator for the present mode. Theapplicable road conditions will bedisplayed on the accessorymeter. Turn the dial to select thedesired mode. The indicator...

249 2-4. Using other driving systems 2 When drivin g Messages displayed on the accessory meter Depending on switch operation, one of the following messages mayappear on the accessory meter to provide guidance on transfer modeselection etc: Message Details Procedure SHIFT TO 4WD(When selecting MUD &a...

252 2-4. Using other driving systems CAUTION ■ Before driving To avoid an accident, observe the precautions relating to off-road driving.( → P. 262) ■ When using Multi-terrain Select ● Do not use the Multi-terrain Select system for normal (on-road) driving.The Multi-terrain Select system is designed...

253 2-4. Using other driving systems 2 When drivin g Driving assist systems To help enhance driving safety and performance, the following sys-tems operate automatically in response to various driving situations.Be aware, however, that these systems are supplementary andshould not be relied upon too ...

256 2-4. Using other driving systems ■ Turning off both TRAC and VSC systems To turn the TRAC and VSC sys-tems off, press and hold the but-ton for more than 3 secondswhile the vehicle is stopped. The “TRAC OFF” and VSC offindicators will come on. Press the button again to turn thesystems back on.

258 2-4. Using other driving systems ■ Turning off both TRAC (TRC) and VSC systems To turn the TRAC (TRC) andVSC systems off, press and holdthe button for more than 3 sec-onds while the vehicle isstopped. The “TRAC OFF (TRC OFF)” andVSC off indicators will come on. Press the button again to turn the...

259 2-4. Using other driving systems 2 When drivin g ■ Hill-start assist control operation conditions ● The shift lever is in D or S. ● The brake pedal is not depressed. ● The rear differential is unlocked (if equipped). ■ If the brake system overheats The hill-start assist control will cease operat...

260 2-4. Using other driving systems ■ Reactivation of the TRAC (TRC)/VSC systems (4WD models) If the TRAC (TRC)/VSC systems are turned off, the systems will not turn oneven when vehicle speed increases. CAUTION ■ The ABS and Multi Terrain ABS do not operate effectively when ● Tires with inadequate ...

261 2-4. Using other driving systems 2 When drivin g CAUTION ■ When the VSC is activated The slip indicator light flashes. Always drive carefully. Reckless driving may cause an accident. Exercise particular care when theindicator light flashes. ■ When TRAC (TRC)/VSC systems are turned off Be especia...

262 2-5. Driving information Off-road precautions Off-road vehicle feature ● Specific design characteristics give it a higher center of gravitythan ordinary passenger cars. This vehicle design feature causesthis type of vehicle to be more likely to rollover. And, utility vehicleshave a significantly...

263 2-5. Driving information 2 When drivin g CAUTION ■ Off-road vehicle precautions Always observe the following precautions to minimize the risk of death, seri-ous injury or damage to your vehicle: ● In a rollover crash, an unbelted person is significantly more likely to diethan a person wearing a ...

264 2-5. Driving information Off-road driving When driving your vehicle off-road, please observe the following pre-cautions to ensure your driving enjoyment and to help prevent theclosure of areas to off-road vehicles: ● Drive your vehicle only in areas where off-road vehicles are permit-ted to trav...

265 2-5. Driving information 2 When drivin g CAUTION ■ Off-road driving precautions Always observe the following precautions to minimize the risk of death, seri-ous injury or damage to your vehicle: ● Drive carefully when off the road. Do not take unnecessary risks by drivingin dangerous places. ● D...

266 2-5. Driving information NOTICE ■ To prevent water damage Take all necessary safety measures to ensure that water damage to theengine or other components does not occur. ● Water entering the engine air intake will cause severe engine damage. ● Water entering the automatic transmission will cause...

267 2-5. Driving information 2 When drivin g Cargo and luggage Take notice of the following information about storage precau-tions, cargo capacity and load: ● Stow cargo and luggage in the luggage compartment wheneverpossible. ● Be sure all items are secured in place. ● To maintain vehicle balance w...

270 2-5. Driving information CAUTION ■ Things that must not be carried in the luggage compartment The following things may cause a fire if loaded in the luggage compart-ment: ● Receptacles containing gasoline ● Aerosol cans ■ Storage precautions Observe the following precautions.Failure to do so may...

271 2-5. Driving information 2 When drivin g CAUTION ■ Capacity and distribution ● Do not exceed the maximum axle weight rating or the total vehicleweight rating. ● Even if the total load of occupant’s weight and the cargo load is lessthan the total load capacity, do not apply the load unevenly. Imp...

272 2-5. Driving information NOTICE ■ When loading cargo Be careful not to scratch the surface of the moon roof.

273 2-5. Driving information 2 When drivin g Vehicle load limits ■ Total load capacity and seating capacity These details are also described on the tire and loading informationlabel. ( → P. 520) Vehicle load limits include total load capacity, seating capacity,towing capacity and cargo capacity. ■ T...

274 2-5. Driving information CAUTION ■ Overloading the vehicle Do not overload the vehicle. It may not only cause damage to the tires, but also degrade steering andbraking ability, resulting in an accident.

275 2-5. Driving information 2 When drivin g Winter driving tips Carry out the necessary preparations and inspections before drivingthe vehicle in winter. Always drive the vehicle in a manner appropri-ate to the prevailing weather conditions. ■ Pre-winter preparations ● Use fluids that are appropria...

276 2-5. Driving information ■ Before driving the vehicle Perform the following according to the driving conditions. ● Do not try to forcibly open a window or move a wiper that isfrozen. Pour warm water over the frozen area to melt the ice.Wipe away the water immediately to prevent it from freezing....

277 2-5. Driving information 2 When drivin g Selection tire chains Use the correct tire chain size when mounting the tire chains.Chain size is regulated for each tire size. Side chain(0.20 in. [5 mm] in diameter)Cross chain(0.20 in. [5 mm] in diameter) Regulations on the use of tire chains Regulatio...

278 2-5. Driving information CAUTION ■ Driving with snow tires Observe the following precautions to reduce the risk of accidents. Failure to do so may result in a loss of vehicle control and cause death orserious injury. ● Use tires of the size specified. ● Maintain the recommended level of air pres...

279 2-5. Driving information 2 When drivin g NOTICE ■ Repairing or replacing snow tires Request repairs or replacement of snow tires from Toyota dealers or legiti-mate tire retailers. This is because the removal and attachment of snow tires affects the opera-tion of the tire pressure warning valves ...

280 2-5. Driving information Trailer towing Your vehicle is designed primarily as a passenger-and-load car-rying vehicle. Towing a trailer will have an adverse effect on han-dling, performance, braking, durability, and fuel consumption.For your safety and the safety of others, do not overload the ve...

281 2-5. Driving information 2 When drivin g Weight limits Confirm that the gross trailer weight, gross combination weight, grossvehicle weight, gross axle weight and trailer tongue load are all withinthe limits. ● The gross trailer weight must never exceed towing capacitydescribed in the table abov...

282 2-5. Driving information Towing related terms Towing related term Meaning GVWR (Gross Vehicle Weight Rating) The maximum allowable gross vehicle weight. The gross vehicle weight is the total weight of the vehicle. When towing a trailer, it is the sum of the vehicle weight (including the occupant...

283 2-5. Driving information 2 When drivin g Trailer tongue load ● A recommended tongue load varies in accordance with the typesof trailers or towing as described below. ● In order to ensure the recommended values shown below, thetrailer must be loaded by referring to the following instructions.The ...

285 2-5. Driving information 2 When drivin g Selecting a trailer ball Use the correct trailer ball for your application. Trailer ball load rating Matches or exceeds the grosstrailer weight rating of the trailer. Ball diameter Matches the size of the trailercoupler. Most couplers arestamped with the ...

286 2-5. Driving information Trailer towing tips Your vehicle will handle differently when towing a trailer. In order toavoid accident, death or serious injury, keep the following in mindwhen towing. ● Before starting out, check the trailer lights and the vehicle-trailerconnections. Recheck after dr...

288 2-5. Driving information ● Always place wheel blocks under both the vehicle and the trailerwheels when parking. Apply the parking brake firmly, and put thetransmission in P. Avoid parking on a slope, but if unavoidable, doso only after performing the following: Apply the brakes and keep them app...

289 2-5. Driving information 2 When drivin g ■ Service connector for towing brake controller ■ Before towing Check that the following conditions are met: ● The vehicle’s tires are properly inflated. ● Trailer tires are inflated according to the trailer manufacturer’s recom-mendation. ● All trailer l...

290 2-5. Driving information ■ Maintenance ● If you tow a trailer, your vehicle will require more frequent maintenancedue to the additional load. (See “Scheduled Maintenance Guide” or“Owner’s Manual Supplement”.) ● Retighten the fixing bolts of the towing ball and bracket after approxi-mately 600 mi...

291 2-5. Driving information 2 When drivin g CAUTION ■ Hitches ● If you wish to install a trailer hitch, contact your Toyota dealer. ● Use only a hitch that conforms to the gross trailer weight requirement. ● Follow the directions supplied by the hitch manufacturer. ● Lubricate the hitch ball with a...

292 2-5. Driving information NOTICE ■ When installing a trailer hitch ● Use only the position recommended by your Toyota dealer. Do not installthe trailer hitch on the bumper; this may cause body damage. ● Do not use axle-mounted hitches, as they can cause damage to the axlehousing, wheel bearings, ...

293 2-5. Driving information 2 When drivin g Dinghy towing NOTICE ■ To avoid serious damage to your vehicle Do not tow your vehicle with four wheels on the ground. Your vehicle is not designed to be dinghy towed (with 4 wheelson the ground) behind a motor home.

296 3-1. Using the air conditioning system and defogger Manual air conditioning system ∗ Adjusting the settings ■ Basic setting To turn on the air conditioning system and adjust the fanspeed, turn the fan speed control knob clockwise (increase) orcounterclockwise (decrease). Turning the knob to “OFF...

297 3-1. Using the air conditioning system and defogger 3 Interior fe atures To adjust the temperature setting, turn the temperature controlknob clockwise (warm) or counterclockwise (cool). If is not pressed, the system will blow ambient temperature air or heated air. For quick cooling, turn the tem...

298 3-1. Using the air conditioning system and defogger Air flows to the feet. Air flows to the feet and thewindshield defogger operates. The air intake is automaticallyswitched to outside air mode. Pressing to turn the cool- ing and dehumidification functionon clears the windshield and sidewindows ...

299 3-1. Using the air conditioning system and defogger 3 Interior fe atures ■ Switching between outside air and recirculated air modes Press . The mode switches between outside air mode (introduces air from out-side the vehicle) (indicator off) and recirculated air mode (recycles airinside the vehi...

300 3-1. Using the air conditioning system and defogger Rear outlets Direct air flow to the left orright, up or down.Turn the knob to open or closethe vent. CTH31AS016 ■ Using the system in recirculated air mode The windows will fog up more easily if recirculated air mode is used for anextended peri...

301 3-1. Using the air conditioning system and defogger 3 Interior fe atures ■ Air conditioning odors ● During use, various odors from inside and outside the vehicle may enterinto and accumulate in the air conditioning system. This may then causeodor to be emitted from the vents. ● To reduce potenti...

302 3-1. Using the air conditioning system and defogger Automatic air conditioning system ∗ Air outlets and fan speed are automatically adjusted according to thetemperature setting. Driver's side temperature control dial Air outlet display Driver’s side temperature display Fan speed display Passenge...

303 3-1. Using the air conditioning system and defogger 3 Interior fe atures Using the automatic air conditioning system Press . The air conditioning system begins to operate. Air outlets and fanspeed are automatically adjusted according to the temperature set-ting. Turn clockwise to increases the t...

304 3-1. Using the air conditioning system and defogger Adjusting the settings manually ■ Basic setting To turn on the air conditioning system and adjust the fan speed, press “ > ” on to increase the fan speed and “ < ” to decrease the fan speed. Press to turn the fan off. To adjust the temper...

306 3-1. Using the air conditioning system and defogger ■ Switching between outside air and recirculated air modes Press . The mode switches between outside air mode (the indicator is off)and recirculated air mode (the indicator is on) each time the button ispressed. Defogging the windshield Defoggi...

310 3-1. Using the air conditioning system and defogger Rear window and outside rear view mirror defoggers Defoggers are used to defog the rear window, and to remove rain-drops, dew and frost from the outside rear view mirrors. Before operating the defoggers, make sure the back window iscompletely c...

311 3-1. Using the air conditioning system and defogger 3 Interior fe atures ■ The defoggers can be operated when ● Vehicles without a smart key system: The engine switch is in the “ON” position. Vehicles with a smart key system: The “ENGINE START STOP” switch is in IGNITION ON mode. ● The back wind...

312 3-1. Using the air conditioning system and defogger Windshield wiper de-icer ∗ ■ The windshield wiper de-icer can be operated when Vehicles without a smart key system The engine switch is in the “ON” position. Vehicles with a smart key system The “ENGINE START STOP” switch is in IGNITION ON mode...

313 3 Interior fe atures 3-2. Using the audio system Audio system types With a navigation system Owners of models equipped with a navigation system should referto the “Navigation System Owner's Manual”. Without a navigation system Type A: CD player with changer controller and AM/FM radio Type B: CD ...

314 3-2. Using the audio system Type C: CD player with changer and AM/FM radio Title Page Using the radio P. 317 Using the CD player P. 324 Playing MP3 and WMA discs P. 333 Operating an iPod P. 341 Operating a USB memory P. 348 Optimal use of the audio system P. 355 Using the AUX port P. 360 Using t...

315 3-2. Using the audio system 3 Interior fe atures Language settings (type B and C) The language used for all voice guidance, voice recognition and mes-sages may be changed. Press . Press (MORE). Press (LANG). Press or as corresponds to the desired lan- guage. For vehicles sold in the U.S.A. “ENG”...

316 3-2. Using the audio system CAUTION ■ For vehicles sold in the U.S.A. and Canada ● Part 15 of the FCC Rules and RSS-Gen of the IC Rules FCC Warning:Changes or modifications not expressly approved by the party responsiblefor compliance could void the user's authority to operate the equipment. ● L...

317 3-2. Using the audio system 3 Interior fe atures Using the radio Type A Type B and C Power Volume Adjusting the frequency(AM, FM mode)or channel (SAT mode) Seeking a frequency Displaying radio text messages AM ⋅ SAT/FM mode buttons Scanning for receivable stations Station selector Changing the c...

320 3-2. Using the audio system ■ Scanning XM ® Satellite Radio channels ● Scanning channels in the current category Press . When the desired channel is reached, press again. ● Scanning the preset channels Press and hold until you hear a beep. When the desired channel is reached, press again. ■ Disp...

321 3-2. Using the audio system 3 Interior fe atures ■ When the battery is disconnected All preset stations are erased. (type A only) ■ Reception sensitivity ● Type B and C ⎯ Cargo loaded on the roof luggage carrier, especially metal objects, may adversely affect the reception of XM ® Satellite Radi...

323 3-2. Using the audio system 3 Interior fe atures Contact the XM ® Listener Care Center at 1-800-967-2346 (U.S.A.) or 1-877- 438-9677 (Canada) ■ Certifications for the radio tuner This equipment has been tested and found to comply with the limits for aclass B digital device, pursuant to Part 15 o...

324 3-2. Using the audio system Using the CD player Type A Type B and C Power Volume Displaying text messages CD eject Repeat play Selecting a track Rewinding Random playback Searching playback Playback Fast-forwarding Selecting a track Power Volume CD load (type C only) Searchingplayback CD eject S...

325 3-2. Using the audio system 3 Interior fe atures Loading CDs ■ Loading a CD (type A and B) Insert a CD. ■ Loading a CD (type C) Press .When the indicator on the slot turns from amber to green,insert a CD. ■ Loading multiple CDs (type C only) Press and hold until you hear a beep. When the indicat...

326 3-2. Using the audio system Ejecting CDs ■ Ejecting a CD (type A and B) Press and remove the CD. ■ Ejecting a CD (type C) To select the CD to be ejected, press ( ) or ( ). The selected CD number is shown on the display. Press and remove the CD. ■ Ejecting all the CDs (type C only) Press and hold...

327 3-2. Using the audio system 3 Interior fe atures Scanning tracks Press . The first ten seconds of each track will be played. To cancel, press again. Press again when the desired track is reached. Selecting a CD (type C only) ■ Selecting a CD to play Press ( ) or ( ). ■ Scanning loaded CDs Press ...

328 3-2. Using the audio system Random playback ■ Current CD Press (RAND) or (RDM). Songs are played in random order. To cancel, press the button once more (type A and B), or twice more(type C). ■ All CDs (type C only) Press (RDM) twice. Tracks on all loaded CDs are played in random order. To cancel...

329 3-2. Using the audio system 3 Interior fe atures Switching the display Press . Each time is pressed, the display changes in the following order: Type A: Track no./Elapsed time → CD title → Track name. Type B and C: Track title → Track name/Artist name → Track name/ Elapsed time. ■ Display (type ...

331 3-2. Using the audio system 3 Interior fe atures NOTICE ■ CDs and adapters that cannot be used Do not use the following types of CDs, 3 in. (8 cm) CD adapters or DualDiscs.Doing so may damage the CD player and/or the CD insert/eject function. ● CD player with changer and AM/FMradio: CDs that hav...

332 3-2. Using the audio system NOTICE ■ CD player precautions Failure to follow the precautions below may result in serious damage to theCDs or the player itself. ● Do not insert anything other than CDs into the CD slot. ● Do not apply oil to the CD player. ● Store CDs away from direct sunlight. ● ...

333 3-2. Using the audio system 3 Interior fe atures Playing MP3 and WMA discs Type A Type B and C Power Volume Displaying text messages CD eject Repeat play Selecting a file Selecting a folder and files Random playback Searchingplayback Playback Selecting a file Rewinding Fast-forwarding Power Volu...

335 3-2. Using the audio system 3 Interior fe atures ■ Selecting the desired file by cueing the files in the folder Press . When the desired file is reached, press once again. Fast-forwarding and rewinding files Type A: Press ( ) or ( ). Type B and C: Press and hold “ ∧ ” or “ ∨ ” on . Playing and p...

336 3-2. Using the audio system Repeat play ■ Repeating a file Press (RPT) or (RPT). To cancel, press the button once more (type A and B), or twice more(type C). ■ Repeating all of the files in a folder Type A: Press and hold (RPT) until you hear a beep. Type B and C: Press (RPT) twice. To cancel, p...

337 3-2. Using the audio system 3 Interior fe atures ■ Display (type A only) → P. 329 ■ Error messages “CD CHECK”: This indicates a problem either with the CD or inside the player. The CD may be dirty, damaged or inserted up-sidedown. “WAIT” or “PLEASE WAIT”: Operation has stopped due to a high temp...

338 3-2. Using the audio system ■ MP3 and WMA files MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by usingMP3 compression. WMA (Windows Media ® Audio) is a Microsoft audio compression format. This format compresse...

340 3-2. Using the audio system ● MP3 and WMA playback When a disc containing MP3 or WMA files is inserted, all files on the discare first checked. Once the file check is finished, the first MP3 or WMA fileis played. To make the file check finish more quickly, we recommend youdo not write in any fil...

341 3-2. Using the audio system 3 Interior fe atures Operating an iPod ∗ Connecting an iPod enables you to enjoy music from the vehiclespeakers. ■ Connecting an iPod Open the glove box and con-nect an iPod using an iPodcable. Turn on the power of the iPod ifit is not turned on. Press . CTH32AS024 ST...

342 3-2. Using the audio system ■ Control panel Power Volume Selector knob Displaying text messages Selector buttons Playback Playback/pause Selecting a track/fast-forwardingand rewinding

343 3-2. Using the audio system 3 Interior fe atures Selecting a play mode Press (BROWSE) to select iPod menu mode. Press , , or as corresponds to the desired play mode. Pressing (MORE) to change to the second selection list. ■ Play mode list Depending on the model, the name of your iPod may be disp...

344 3-2. Using the audio system ■ Selecting a list Turn to display the first selection list. Press to select the desired item. Repeat the same procedure to select the desired song name. To return to the previous selection list, press ( ). Selecting songs from a song list Press (LIST). The current pl...

346 3-2. Using the audio system Switching the display Press . Each time is pressed, the display changes in the following order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time ■ About iPod ● Apple is not responsible for the operation of this device or its co...

347 3-2. Using the audio system 3 Interior fe atures ■ Compatible models Depending on differences between models or software version etc., somemodels listed above might be incompatible with this system. iPod 4th generation and earlier models are not compatible with this system. iPhone, iPod mini, iP...

348 3-2. Using the audio system Operating a USB memory ∗ Connecting a USB memory enables you to enjoy music from thevehicle speakers. ■ Connecting a USB memory Open the glove box and con-nect a USB memory. Turn on the power of the USBmemory if it is not turned on. Press . CTH32AS024 STEP 1 STEP 2 ∗ ...

349 3-2. Using the audio system 3 Interior fe atures Selecting and scanning a folder ■ Selecting a folder Press “ ∧ ” or “ ∨ ” on to select the desired folder. ■ Returning to the first file of the first folder Press and hold “ ∨ ” on until you hear a beep. ■ Scanning the first file of all the folder...

350 3-2. Using the audio system Selecting and scanning files ■ Selecting a file Turn or press “ ∧ ” or “ ∨ ” on to select the desired file. ■ Scanning the files in a folder Press . The first ten seconds of each file will be played. To cancel, press again. When the desired file is reached, press agai...

351 3-2. Using the audio system 3 Interior fe atures Repeat play ■ Repeating a file Press (RPT). To cancel, press the button twice. ■ Repeating all the files in a folder Press (RPT) twice. To cancel, press the button again. Switching the display Press . Each time is pressed, the display changes in t...

352 3-2. Using the audio system ■ USB memory ● Compatible device USB memories that can be used for MP3 and WMA playback. Depending on the type of USB device, playback may not be possible. ● Compatible device formats The following device formats can be used: • USB communication formats: USB2.0 FS (12...

354 3-2. Using the audio system ● Extensions If the file extensions .mp3 and .wma are used for files other than MP3 andWMA files, they will be mistakenly recognized and played as MP3 andWMA files. This may result in large amounts of interference and damageto the speakers. ● Playback • To play MP3 fi...

355 3-2. Using the audio system 3 Interior fe atures Optimal use of the audio system Type A Type B and C Adjusting the sound quality and ASL Adjusting the sound quality and ASL Selector buttons Menu button

357 3-2. Using the audio system 3 Interior fe atures Type B and C *: The sound quality level is adjusted individually in each audio mode. ■ Adjusting the Automatic Sound Levelizer (ASL) Type A When “ASL” is selected, turning to the right changes the “ASL” level in the order of “LOW”, “MID” and “HIGH...

359 3-2. Using the audio system 3 Interior fe atures Party mode switch You can switch the sounds quality types by pressing the switch. Base modeParty mode In party mode, the sound volumefrom the speakers on the backdoor is bigger than in base mode.(The output from the speakers onthe rear doors will ...

360 3-2. Using the audio system Using the AUX port ■ Operating portable audio devices connected to the audio system The volume can be adjusted using the vehicle's audio controls. All the otheradjustments must be made on the portable audio device itself. ■ When using a portable audio device connected...

361 3-2. Using the audio system 3 Interior fe atures Using the steering wheel audio switches ∗ ∗ : If equipped Some audio features can be controlled using the switches on thesteering wheel. Increases/decreases vol-umeRadio mode: Selects radiostationsCD mode: Selects tracks,files (MP3 and WMA) anddis...

363 3-2. Using the audio system 3 Interior fe atures Selecting a track/file or song Press to select CD, iPod, USB memory or Bluetooth ® audio mode. Press “ ∨ ” or “ ∧ ” on to select the desired track/file or song. Selecting a folder or album Press to select the CD, USB memory or Bluetooth ® audio mo...

364 3-3. Using the Bluetooth ® audio system Bluetooth ® audio system ∗ ■ Conditions under which the system will not operate ● If using a portable player that does not support Bluetooth ® ● If the portable player is switched off ● If the portable player is not connected ● If the portable player’s bat...

365 3-3. Using the Bluetooth ® audio system 3 Interior fe atures ■ When transferring ownership of the vehicle Be sure to initialize the system to prevent personal data from being improp-erly accessed. ( → P. 403) ■ About Bluetooth ® ■ Compatible models ● Bluetooth ® specifications: Ver. 1.2 ● Follow...

366 3-3. Using the Bluetooth ® audio system CAUTION ■ FCC WARNING Changes or modifications not expressly approved by the party responsiblefor compliance could void the user's authority to operate the equipment. Radio Frequency Radiation Exposure. This equipment complies with FCC/IC radiation exposur...

367 3-3. Using the Bluetooth ® audio system 3 Interior fe atures Using the Bluetooth ® audio system ■ Audio unit Display Track title, Artist name,Album name, Elapsed time,“Streaming Audio”, etc. isdisplayed.Selects items such as menuand numberTurn: Selects an itemPress: Inputs the selecteditemBlueto...

368 3-3. Using the Bluetooth ® audio system Operating the system using voice commands By following voice guidance instructions output from the speaker,voice commands enable to the operation of the Bluetooth ® audio sys- tem without the need to check the display or operate . ■ Operation procedure whe...

370 3-3. Using the Bluetooth ® audio system Input the passkey into the portable player. Refer to the manual that comes with the portable player for the oper-ation of the portable player. Guidance for registration completion is heard. If the portable player has a Bluetooth ® phone, the phone can be r...

371 3-3. Using the Bluetooth ® audio system 3 Interior fe atures ■ When using a voice command For numbers, say a combination of single digits from zero to nine. Say the command correctly and clearly. ■ Situations that the system may not recognize your voice ● When driving on rough roads ● When drivi...

372 3-3. Using the Bluetooth ® audio system Operating a Bluetooth ® enabled portable player Selecting an album Press “ ∨ ” or “ ∧ ” on . Selecting tracks Press “ ∧ ” or “ ∨ ” on . Playing and pausing tracks Press . Volume Power Playback/pause Displaying text messages Selector knob Selecting tracks F...

373 3-3. Using the Bluetooth ® audio system 3 Interior fe atures Fast-forwarding and reversing tracks Press and hold “ ∧ ” or “ ∨ ” on . Switching the display Press . Each time is pressed, the display changes in the following order: Track title → Track title/Artist name → Track title/Album name → Tr...

374 3-3. Using the Bluetooth ® audio system Setting up a Bluetooth ® enabled portable player Registering a portable player in the Bluetooth ® audio system allows the system to function. The following functions can be used for reg-istered portable players: ■ Functions and operation procedures Press a...

375 3-3. Using the Bluetooth ® audio system 3 Interior fe atures Registering a portable player Select “Pair Audio Players (Pair audio player)” using a voice com- mand or , and perform the procedure for registering a portable player. ( → P. 369) Selecting a portable player to be used Select “Select A...

376 3-3. Using the Bluetooth ® audio system Press the talk switch and say “From car” or “From audio”, and select “Confirm” using a voice command or . Vehicles with smart key system: If “From car” is selected, the porta-ble player will be automatically connected whenever the “ENGINESTART STOP” switch...

377 3-3. Using the Bluetooth ® audio system 3 Interior fe atures Listing the registered portable players Select “List Audio Players” using a voice command or . The list of registered portable players will be read aloud.When listing is complete, the system returns to “BT Audio Setup”. Pressing the ta...

378 3-3. Using the Bluetooth ® audio system Deleting a registered portable player Select “Delete Audio Player” using a voice command or . Select the portable player to be deleted by either of the follow-ing methods and select “Confirm” using a voice command or : a. Press the talk switch and say the ...

379 3-3. Using the Bluetooth ® audio system 3 Interior fe atures Bluetooth ® audio system setup ■ System setup items and operation procedures → P. 401

380 3-4. Using the hands-free phone system (for cellular phone) Hands-free phone system (for cellular phone) features ∗ This system supports Bluetooth ® , which allows you to make or receive calls without using cables to connect a cellular phone andthe system, and without operating the cellular phon...

383 3-4. Using the hands-free phone system (for cellular phone) 3 Interior fe atures CAUTION ■ FCC WARNING Changes or modifications not expressly approved by the party responsiblefor compliance could void the user's authority to operate the equipment. Radio Frequency Radiation Exposure. This equipme...

384 3-4. Using the hands-free phone system (for cellular phone) Using the hands-free phone system (for cellular phone) ■ Audio unit DisplayA message, name, phonenumber, etc. is displayed. Lower-case characters andspecial characters, such asan umlaut, cannot be dis-played. Selects speed dialsSelects ...

385 3-4. Using the hands-free phone system (for cellular phone) 3 Interior fe atures ■ Steering wheel switches Volume The voice guidance volumecannot be adjusted using thisbutton. On-hook switch Turns the hands-free sys-tem off/ends a call/refuses acallOff-hook switch Turns the hands-free sys-tem on...

386 3-4. Using the hands-free phone system (for cellular phone) Operating the system using a voice command By following voice guidance instructions output from the speaker,voice commands enable the operation of the hands-free phone sys- tem without the need to check the display or operate . ■ Operat...

387 3-4. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Select “Pair Phone” using a voice command or . Register a phone name by either of the following methods. a. Select “Record Name” using , and say a name to be registered. b. Press the talk switch and say a name to be...

390 3-4. Using the hands-free phone system (for cellular phone) ■ Using a short cut key First menu Second menu Operation detail Dial “XXX (name)” - Dialing a number registered in the phone book Dial “XXX (number)” - Dialing the input numbers Phone book add entry - Adding a new number Phone book chan...

391 3-4. Using the hands-free phone system (for cellular phone) 3 Interior fe atures ■ Automatic volume adjustment When vehicle speed reaches 50 mph (80 km/h) or more, the volume auto-matically increases. The volume returns to the previous volume setting whenvehicle speed drops to 43 mph (70 km/h) o...

392 3-4. Using the hands-free phone system (for cellular phone) Making a phone call Dialing by inputting a number Press the talk switch and say “Dial by number”.Press the talk switch and say the phone number.Dial by one of the following methods:a. Press the off-hook switch.b. Press the talk switch a...

393 3-4. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Dialing by inputting a name Press the talk switch and say “Dial by name”.Select a registered name to be input by either of the followingmethods:a. Press the talk switch and say a registered name.b. Press the talk sw...

394 3-4. Using the hands-free phone system (for cellular phone) Transferring a phone call A call can be transferred between the cellular phone and systemwhile dialing, receiving a call, or during a call. Use one of the follow-ing methods: a. Operate the cellular phone. Refer to the manual that comes...

395 3-4. Using the hands-free phone system (for cellular phone) 3 Interior fe atures The following operations can be performed: Dialing: Press the off-hook switch or select “Dial” using a voice command or . Storing the number in the phone book: Select “Store” using a voice command or . Deleting: Sel...

396 3-4. Using the hands-free phone system (for cellular phone) Setting a cellular phone Registering a cellular phone Select “Pair Phone” using a voice command or , and perform the procedure for registering a cellular phone. ( → P. 386) Registering a cellular phone in the hands-free phone system all...

397 3-4. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Selecting the cellular phone to be used Select “Select Phone” using a voice command or . Pattern A Select the cellular phone to be used by either of the followingmethods, and select “Confirm” using a voice command o...

398 3-4. Using the hands-free phone system (for cellular phone) c. Select the desired phone name using . Press the talk switch or select “Record Name” using , and say a new name. Select “Confirm” using a voice command or . Listing the registered cellular phones Selecting “List Phones” using a voice ...

399 3-4. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Deleting a cellular phone Select “Delete Phone” using a voice command or . Select the cellular phone to be deleted by either of the follow-ing methods and select “Confirm” using a voice command or : a. Press the tal...

400 3-4. Using the hands-free phone system (for cellular phone) Turning the hands-free phone automatic connection on/off ■ Turning off the automatic connection Select “Handsfree Power” using a voice command or . Select “Turn off” using a voice command or . ■ Turning on the automatic connection Selec...

401 3-4. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Security and system setup Setting or changing the PIN ■ Setting a PIN Select “Set PIN” using a voice command or . To enter the menu of each setting, follow the steps below: ■ Security setting items and operation pro...

402 3-4. Using the hands-free phone system (for cellular phone) Enter a PIN using a voice command or . When using , input the code 1 digit at a time. ■ Changing the PIN Select “Set PIN” using a voice command or . Enter the registered PIN using a voice command or . Enter a new PIN using a voice comma...

403 3-4. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Setting voice guidance volume Select “Guidance Volume” using . Change the voice guidance volume. To decrease the volume: Turn counterclockwise. To increase the volume: Turn clockwise. Initialization Select “Reset Se...

405 3-4. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Using the phone book Adding a new phone number The following methods can be used to add a new phone number: ● Inputting a phone number using a voice command ● Transferring data from the cellular phone ● Inputting a ...

407 3-4. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Inputting a phone number using STEP2-1 Select “Manual Input” using . STEP2-2 Input a phone number using , and press once again. Input the phone number 1 digit at a time. Selecting a phone number from outgoing or inc...

408 3-4. Using the hands-free phone system (for cellular phone) Select the name to be registered by either of the followingmethods, and select “Confirm” using a voice command or : a. Press the talk switch and say the desired name. b. Select “Record Name” using , and say the desired name. Select “Con...

409 3-4. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Setting speed dials Select “Speed Dial (Set speed dial)” using a voice command or . Select the data to be registered as a speed dial by either ofthe following methods:a. Press the talk switch, say desired number, an...

410 3-4. Using the hands-free phone system (for cellular phone) Changing a registered name Select “Change Name” using a voice command or . Select the name to be changed by either of the followingmethods.a. Press the talk switch, say desired name, and select “Con- firm” using a voice command or . b. ...

411 3-4. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Deleting registered data Select “Delete Entry” using a voice command or . Select the data to be deleted by either of the following meth- ods, and select “Confirm” using a voice command or : a. Press the talk switch,...

412 3-4. Using the hands-free phone system (for cellular phone) Listing the registered data Selecting “List names” using a voice command causes a list of theregistered data to be read aloud. When listing is complete, the system returns to “Phonebook”.Pressing the talk switch while the desired data i...

413 3 Interior fe atures 3-5. Using the interior lights Interior lights list Rear interior light ( → P. 414) Front personal lights/front interior light ( → P. 414) Shift lever light (when the engine switch is in the “ACC” or “ON”position [without a smart key system] or “ENGINE STARTSTOP” switch is i...

414 3-5. Using the interior lights Interior lights Front Turns the lights offTurns the door position on Rear Turns the door position onTurns the light offTurns the light on Personal lights Turns the lights on/off CTH36AS022 CTH36AS024 CTH36AS034 Interior lights and personal lights

415 3-5. Using the interior lights 3 Interior fe atures ■ Illuminated entry system Vehicles without a smart key system The lights automatically turn on/off according to the engine switch position,whether the doors are locked/unlocked, and whether the doors are open/closed. Vehicles with a smart key ...

416 3-6. Using the storage features List of storage features Auxiliary boxGlove boxBottle holdersTissue pocketCup holdersPen holderConsole boxCoin holder CTH36AS036

417 3-6. Using the storage features 3 Interior fe atures Glove box The glove box can be opened by pressing the lock release buttonand can be locked and unlocked by using the master key (vehicleswithout a smart key system) or the mechanical key (vehicles with asmart key system). OpenUnlockLock CAUTIO...

418 3-6. Using the storage features Console box Lift the lid while pulling up theknob to release the lock. CTH36AS011 ■ The separator can be used in either of the positions shown in the illus-tration CAUTION ■ Caution while driving Keep the console box closed. In the event of sudden braking, an acci...

419 3-6. Using the storage features 3 Interior fe atures Coin holder Lift the lid while pulling up theknob to release the lock. CTH36AS013 CAUTION ■ Caution while driving Keep the console box closed. In the event of sudden braking, an accidentmay occur due to an occupant being struck by the open con...

420 3-6. Using the storage features Tissue pocket Lift the lid while pulling up theknob to release the lock. CTH36AS014 CAUTION ■ Caution while driving Keep the console box closed. In the event of sudden braking, an accidentmay occur due to an occupant being struck by the open console box or theitem...

421 3-6. Using the storage features 3 Interior fe atures Pen holder Lift the lid while pulling up theknob to release the lock. CTH36AS015 CAUTION ■ Caution while driving Keep the console box closed. In the event of sudden braking, an accidentmay occur due to an occupant being struck by the open cons...

422 3-6. Using the storage features Auxiliary box (if equipped) Push the lid. CTH36AS016 CAUTION ■ Caution while driving Keep the auxiliary box closed. In the event of sudden braking, an accidentmay occur due to an occupant being struck by an open auxiliary box or theitems stored inside. ■ Items uns...

423 3-6. Using the storage features 3 Interior fe atures Cup holders Front seats (standard type transmission) Front seats (multi-mode type transmission) Rear seats (without third row seats) Pull down the rear seat centerarmrest. CTH36AS038 CTH36AS009 CTH36AS005 Cup holders

426 3-6. Using the storage features CAUTION ■ Items unsuitable for the cup holder Do not place anything other than cups or beverage cans in the cup holders.Other items may be thrown out of the holders in the event of an accident orsudden braking, causing injury. If possible, cover hot drinks to prev...

427 3-6. Using the storage features 3 Interior fe atures Bottle holders Front seats Rear seats (without third row seats)/Second row seats (with thirdrow seats) CTH36AS018 CTH36AS019 ■ When using the bottle holder ● When storing a bottle, close the cap. ● The bottle may not be stored depending on its...

428 3-6. Using the storage features NOTICE ■ Items that should not be stowed in the bottle holders Put the cap on before stowing a bottle. Do not place open bottles in the bot-tle holders, or glasses and paper cups containing liquid. The contents mayspill and glasses may break. Bottle holders

429 3 Interior fe atures 3-7. Other interior features Sun visors To set the visor in the for-ward position, flip it down.To set the visor in the sideposition, flip down, unhook,and swing it to the side.To use the side extender,place the visor in the sideposition, then slide it back-ward. CTH37AS007

430 3-7. Other interior features Vanity mirrors NOTICE ■ To prevent battery discharge Do not leave the vanity lights on for extended periods while the engine is off. Slide the cover to open. The light turns on when thecover is opened. CTH37AS008

431 3-7. Other interior features 3 Interior fe atures Clock Adjusts the hoursAdjusts the minutes

432 3-7. Other interior features ■ For quicker adjustment of the clock To advance the minutes and hours quickly, press and hold the “M” or “H” but-ton. The time can be adjusted back or forth by following the procedure below: ■ The clock is displayed when Vehicles without a smart key system The engin...

433 3-7. Other interior features 3 Interior fe atures Outside temperature display The temperature display shows temperatures within the ranges of-40°F (-40°C) and 122°F (50°C). Vehicles without Multi-terrain Select

434 3-7. Other interior features ■ The outside temperature is displayed when Vehicles without a smart key system The engine switch is in the “ON” position. Vehicles with a smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. Vehicles with Multi-terrain Select

435 3-7. Other interior features 3 Interior fe atures ■ ICE indicator Vehicles without Multi-terrain Select Vehicles with Multi-terrain Select ■ Display In the following situations, the correct outside temperature may not be dis-played, or the display may take longer than normal to change: ● When th...

438 3-7. Other interior features ■ The power outlet can be used when Vehicles without a smart key system The engine switch is in the “ACC” or “ON” position. Vehicles with a smart key system The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ONmode. NOTICE ■ To avoid damaging the power outlet...

439 3-7. Other interior features 3 Interior fe atures Power outlets (120V AC) ∗ ∗ : If equipped The power outlet can be used for electrical appliances. Main switch To use the power outlet, turnon the main switch. The power supply starts a fewseconds after the main switchis pressed. Power outlet sock...

441 3-7. Other interior features 3 Interior fe atures ■ The power outlet can be used when The engine is running. ■ The indicator light changes according to the maximum availablecapacity as follows: ■ When the power outlet is in operation The sound of the cooling fan may be heard from the right side ...

443 3-7. Other interior features 3 Interior fe atures CAUTION ■ Using a power outlet Observe the following precautions to reduce the risk of injury. ● Use of the power outlet when it is wet with water or snow may result inelectrical shocks and is extremely dangerous. The power outlet must bethorough...

444 3-7. Other interior features NOTICE ■ To avoid damaging the power outlet and the plug ● Close the power outlet lid when not in use. ● Do not allow foreign objects or liquids to enter the power outlet, as thismay cause a short circuit. ● Do not use plug adaptors to connect too many plugs to the p...

445 3-7. Other interior features 3 Interior fe atures NOTICE ■ If any electrical appliances are to be used while driving Securely fasten both the appliances and their cables to prevent them fromfalling or getting caught in any of the power train components. ■ If the power outlet is loose when an ele...

446 3-7. Other interior features Seat heaters ∗ ■ The seat heaters can be used when Vehicles without a smart key system The engine switch is in the “ON” position. Vehicles with a smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. ■ When not in use Move the dial fully backward. T...

447 3-7. Other interior features 3 Interior fe atures CAUTION ■ Burns ● Use caution when seating the following persons in a seat with the seatheater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the physically chal- lenged • Persons with sensitive skin• Pe...

448 3-7. Other interior features Armrest NOTICE ■ To prevent damage to the armrest Do not apply too much load on the armrest. Fold down the armrest for use. CTH37AS088

449 3-7. Other interior features 3 Interior fe atures Floor mat CAUTION Observe the following precautions. Failure to do so may cause the driver's floor mat to slip, possibly interferingwith the pedals while driving. An unexpectedly high speed may result or it maybecome difficult to stop the vehicle...

450 3-7. Other interior features Compass The compass on the accessory meter display indicates the directionin which the vehicle is heading. “MODE/ ” button “SET/ ” button Direction display ■ Displays and directions Display Direction “N” North “NE” Northeast “E” East “SE” Southeast “S” South “SW” Sou...

451 3-7. Other interior features 3 Interior fe atures Calibrating the compass The direction display deviates from the true direction determined bythe earth’s magnetic field. The amount of deviation varies dependingon the geographic position of the vehicle. If you cross over one of the map boundaries...

453 3-7. Other interior features 3 Interior fe atures Referring to the map above, press the “MODE/ ” or “SET/ ” button to select the number of the zone you are in. Press and hold the “SET/ ” button to confirm the number and to exit deviation calibration mode. (If the button is pressedfor more than 6...

454 3-7. Other interior features Drive the vehicle at 5 mph (8 km/h) or less in a circle until a direc-tion is displayed. If there is not enough space todrive in a circle, drive around theblock until a direction is dis-played. Press and hold the “SET/ ” button to confirm the direction and to exit ci...

455 3-7. Other interior features 3 Interior fe atures ■ Circling calibration error message (vehicles with Multi-terrain Select) CAUTION ■ While driving the vehicle Do not adjust the display. Adjust the display only when the vehicle isstopped. ■ When doing the circling calibration Secure a wide space...

456 3-7. Other interior features Luggage compartment features ■ Cargo hooks Vehicles with third seats Fold down the third seats. ( → P. 72) Raise the hook to use. The cargo hooks are providedfor securing loose items. Vehicles without third seats Raise the hook to use. The cargo hooks are providedfor...

457 3-7. Other interior features 3 Interior fe atures ■ Cargo net hooks The cargo net itself is not included as original equipment. Vehicles with third seats (pattern 1) Raise the rear cargo hook touse. Vehicles with third seats (pattern 2) Fold down the third seats. ( → P. 72) Raise the cargo hook ...

458 3-7. Other interior features Vehicles without third seats (pattern 2) Raise the cargo hook to use. ■ Storage compartment Type A (if equipped) Open the storage compart-ment as shown. Type B (if equipped) Open the storage compart-ment as shown. CTH37AS091 CTH37AS014 CTH37AS092

460 3-7. Other interior features CAUTION ■ When the cargo hooks are not in use To avoid injury, always return the cargo hooks to their stowed positions. ■ Slide deck operating precaution (if equipped) ● Be careful not to get hands or feet pinched by the slide deck. ● Be careful not to allow the slid...

461 3-7. Other interior features 3 Interior fe atures NOTICE ■ To prevent damage to the cargo net hooks Avoid hanging things other than a cargo net on them. ■ Slide deck weight capacity (if equipped) Do not load anything heavier than 440 lb. (200 kg) on the sliding deck. ■ Grocery bag hook weight ca...

462 3-7. Other interior features Garage door opener The garage door opener (HomeLink ® Universal Transceiver) is manufac- tured under license from HomeLink ® . Programming HomeLink ® (for U.S. owners) The HomeLink ® compatible transceiver in your vehicle has 3 buttons which can be programmed to oper...

463 3-7. Other interior features 3 Interior fe atures ■ Programming HomeLink ® Point the remote control trans-mitter for the device 1 to 3 in. (25to 75 mm) from the HomeLink ® buttons. Keep the HomeLink ® indicator light in view while programming. Press and hold one of theHomeLink ® buttons and the ...

464 3-7. Other interior features Test the HomeLink ® operation by pressing the newly pro-grammed button. If a HomeLink ® button has been programmed for a garage door,check to see if the garage dooropens and closes. If the garagedoor does not operate, see if yourgarage transmitter is of the rollingco...

465 3-7. Other interior features 3 Interior fe atures ■ Programming a rolling code system (for U.S. owners) If your device is rolling code equipped, follow the steps under theheading “Programming HomeLink ® ” before proceeding with the steps listed below. Locate the learn button on the ceiling mount...

466 3-7. Other interior features ■ Programming an entry gate (for U.S. owners)/Programming adevice in the Canadian market Place the remote control transmitter 1 to 3 in. (25 to 75 mm)away from the HomeLink ® buttons. Keep the HomeLink ® indicator light in view while programming. Press and hold the s...

467 3-7. Other interior features 3 Interior fe atures Operating HomeLink ® Press the appropriate HomeLink ® button. The HomeLink ® indicator light should come on. The HomeLink ® compatible transceiver in your vehicle continues to send a signal for up to 20 seconds as long as the button is pressed. E...

468 3-7. Other interior features ■ Certification for the garage door opener For vehicles sold in the U.S.A. FCC ID: CB2300NHL3 NOTE:This device complies with Part 15 of the FCC Rules. Operation is subject tothe following two conditions: (1) this device may not cause harmful interfer-ence, and (2) th...

469 3-7. Other interior features 3 Interior fe atures Safety Connect ∗ Safety Connect is a subscription-based telematics service that usesGlobal Positioning System (GPS) data and embedded cellular tech-nology to provide safety and security features to subscribers. SafetyConnect is supported by Toyot...

470 3-7. Other interior features ■ Services Subscribers have the following Safety Connect services avail-able: ● Automatic Collision Notification * Helps drivers receive necessary response from emergencyservice providers. ( → P. 472) * : U.S. Patent No. 7,508,298 B2 ● Stolen Vehicle LocationHelps dr...

471 3-7. Other interior features 3 Interior fe atures ■ Safety Connect Services Information ● Phone calls using the vehicles Bluetooth ® technology will not be possible during Safety Connect. ● Safety Connect is available beginning Fall 2009 on select Toyota models.Contact with the Safety Connect re...

472 3-7. Other interior features Safety Connect LED light Indicators When the “ENGINE START STOP” switch is turned to IGNITION ONmode (vehicles with a smart key system) or the engine switch isturned to the “ON” position (vehicles without a smart key system), thered indicator light comes on for 2 sec...

473 3-7. Other interior features 3 Interior fe atures ■ Stolen Vehicle Location If your vehicle is stolen, Safety Connect can work with local author-ities to assist them in locating and recovering the vehicle. After fil-ing a police report, call the Safety Connect response center at 1-800-331-4331 a...

474 3-7. Other interior features Safety information for Safety Connect Important! Read this information before using Safety Connect. ■ Exposure to radio frequency signals The Safety Connect system installed in your vehicle is a low-powerradio transmitter and receiver. It receives and also sends out ...

475 3-7. Other interior features 3 Interior fe atures ■ License Licensed by QUALCOMM Incorporated under one or more of the followingUnited States Patents and/or their counterparts in other nations: 4,901,307 5,490,165 5,056,109 5,504,773 5,101,5015,506,865 5,109,390 5,511,073 5,228,054 5,535,2395,26...

478 4-1. Maintenance and care Cleaning and protecting the vehicle exterior ■ Automatic car washes ● Fold the mirrors and remove the detachable pole antenna before wash-ing the vehicle. Start washing from the front of the vehicle. Make sure tore-install the antenna and extend the mirrors before drivi...

479 4-1. Maintenance and care 4 Mainten ance an d ca re ■ Aluminum wheels (if equipped) ● Remove any dirt immediately by using a neutral detergent. Do not usehard brushes or abrasive cleaners. Do not use strong or harsh chemicalcleaners. Use the same mild detergent and wax as used on the paint. ● Do...

480 4-1. Maintenance and care NOTICE ■ To prevent paint deterioration and corrosion on the body and compo-nents (aluminum wheels etc.) ● Wash the vehicle immediately in the following cases: • After driving near the sea coast• After driving on salted roads• If coal tar or tree sap is present on the p...

481 4-1. Maintenance and care 4 Mainten ance an d ca re Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle’s interior andkeep it in top condition: ■ Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty sur-faces wit...

482 4-1. Maintenance and care ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a yearto maintain the quality of the vehicle’s interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use asponge or brush to apply...

483 4-1. Maintenance and care 4 Mainten ance an d ca re NOTICE ■ Cleaning detergents ● Do not use the following types of detergent, as they may discolor the vehi-cle interior or cause streaks or damage to painted surfaces: • Non-seat portions: Organic substances such as benzene or gasoline, alkaline...

484 4-2. Maintenance Maintenance requirements ■ Repair and replacement It is recommended that genuine Toyota parts be used for repairs to ensureperformance of each system. If non-Toyota parts are used in replacement orif a repair shop other than a Toyota dealer performs repairs, confirm the war-rant...

485 4-2. Maintenance 4 Mainten ance an d ca re ■ Allow inspection and repairs to be performed by a Toyota dealer ● Toyota technicians are well-trained specialists and are kept up to datewith the latest service information. They are well informed about theoperations of all systems on your vehicle. ● ...

486 4-2. Maintenance General maintenance Engine compartment Items Check points Battery Check the connections. ( → P. 509) Brake fluid Is the brake fluid at the correct level? ( → P. 505) Engine coolant Is the engine coolant at the correct level? ( → P. 503) Engine oil Is the engine oil at the correc...

487 4-2. Maintenance 4 Mainten ance an d ca re Vehicle interior Items Check points Accelerator pedal • The accelerator pedal should move smoothly (without uneven pedal effort or catching). Automatic transmission “Park” mechanism • When parked on a slope and the shift lever is in P, is the vehicle se...

489 4-2. Maintenance 4 Mainten ance an d ca re Vehicle exterior Items Check points Doors • Do the doors operate smoothly? Engine hood • Does the engine hood lock sys- tem work properly? Fluid leaks • There should not be any signs of fluid leakage after the vehicle has been parked. Tires • Is the tir...

490 4-2. Maintenance Emission inspection and maintenance (I/M) programs Some states have vehicle emission inspection programs whichinclude OBD (On Board Diagnostics) checks. The OBD system moni-tors the operation of the emission control system. ■ If the malfunction indicator lamp comes on The OBD sy...

492 4-3. Do-it-yourself maintenance Items Parts and tools Fuses ( → P. 531) • Fuse with same amperage rating as original Light bulbs ( → P. 541) • Bulb with same number and watt- age rating as original • Phillips-head screwdriver• Flathead screwdriver• Wrench Power steering fluid level ( → P. 507) •...

493 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION The engine compartment contains many mechanisms and fluids that maymove suddenly, become hot, or become electrically energized. To avoid deathor serious injury, observe the following precautions: ■ When working on the engine compa...

494 4-3. Do-it-yourself maintenance Hood CAUTION ■ Pre-driving check Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motionand cause an accident, which may result in death or serious injury. Release the lock from the inside of t...

497 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Engine compartment cover ■ Removing the engine compartment cover ■ Installing the clips CTH43AS121 CTH43AS018

500 4-3. Do-it-yourself maintenance ■ Adding engine oil 2.7 L 4-cylinder (2TR-FE) engine If the oil level is below or nearthe low level mark, add engineoil of the same type as thatalready in the engine. 4.0 L V6 (1GR-FE) engine If the oil level is below or nearthe low level mark, add engineoil of th...

501 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Engine oil consumption ● The amount of engine oil consumed depends on the oil viscosity, thequality of the oil and the way the vehicle is driven. ● More oil is consumed under driving conditions such as high speeds andfrequent accelerati...

502 4-3. Do-it-yourself maintenance CAUTION ■ Used engine oil ● Used engine oil contains potentially harmful contaminants which maycause skin disorders such as inflammation and skin cancer, so careshould be taken to avoid prolonged and repeated contact. To remove usedengine oil from your skin, wash ...

503 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Engine coolant The coolant level is satisfactory if it is between the “F” and “L” lines onthe reservoir when the engine is cold. Reservoir cap“F” line“L” line If the level is on or below the “L”line, add coolant up to the “F” line.( → P. ...

504 4-3. Do-it-yourself maintenance Radiator and condenser Check the radiator and condenser and clear away any foreignobjects. If either of the above parts is extremely dirty or you are not sure oftheir condition, have your vehicle inspected by your Toyota dealer. CAUTION ■ When the engine is hot Do...

505 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Brake fluid ■ Checking fluid level The brake fluid level should bebetween the “MAX” and “MIN”lines on the tank. MAXMIN ■ Adding fluid Make sure to check the fluid type and prepare the necessary item. ■ Refilling brake fluid Vehicles witho...

506 4-3. Do-it-yourself maintenance ■ Brake fluid can absorb moisture from the air Excess moisture in the brake fluid can cause a dangerous loss of brakingefficiency. Use only newly opened brake fluid. CAUTION ■ When filling the reservoir Take care as brake fluid can harm your hands and eyes and dam...

507 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Power steering fluid ■ Fluid level The fluid level should be within the appropriate range. 2.7 L 4-cylinder (2TR-FE) engine Full (when cold)Add fluid (when cold)Full (when hot)Add fluid (when hot) 4.0 L V6 (1GR-FE) engine Full (when cold)...

508 4-3. Do-it-yourself maintenance ■ Checking the fluid level Make sure to check the fluid type and prepare the necessary items. Clean all dirt off the reservoir.Remove the cap by turning it counterclockwise.Wipe the dipstick clean.Reinstall the cap and remove it again.Check the fluid level. Fluid ...

509 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Battery Check the battery as follows: Make sure that the battery terminals are not corroded and that thereare no loose connections, cracks, or loose clamps. TerminalsHold-down clamp CTH43AS118 ■ Before recharging When recharging, the batt...

510 4-3. Do-it-yourself maintenance ■ After recharging/reconnecting the battery (vehicles with smart key sys-tem) ● Unlocking the doors using the smart key system may not be possibleimmediately after reconnecting the battery. If this happens, use the wire-less remote control or the mechanical key to...

511 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION ■ Where to safely charge the battery Always charge the battery in an open area. Do not charge the battery in agarage or closed room where there is insufficient ventilation. ■ How to recharge the battery Only perform a slow charge ...

513 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION ■ When adding washer fluid Do not add washer fluid when the engine is hot or running as washer fluidcontains alcohol and may catch fire if spilled on the engine etc. NOTICE ■ Do not use any fluid other than washer fluid Do not use...

514 4-3. Do-it-yourself maintenance Tires Replace or rotate tires in accordance with maintenance sched-ules and treadwear. ■ Checking tires New treadTreadwear indicatorWorn tread The location of treadwearindicators is shown by the“TWI” or “ Δ ” marks, etc., molded on the sidewall ofeach tire. Check ...

515 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Installing tire pressure warning valves and transmitters When replacing tires or wheels, tire pressure warning valves andtransmitters must also be installed. When new tire pressure warning valves and transmitters areinstalled, new tire pr...

516 4-3. Do-it-yourself maintenance ■ When to replace your vehicle’s tires Tires should be replaced if: ● You have tire damage such as cuts, splits, cracks deep enough toexpose the fabric, and bulges indicating internal damage ● A tire goes flat repeatedly or cannot be properly repaired due to thesi...

517 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Tire types ● Summer tiresSummer tires are high-speed performance tires best suited to highwaydriving under dry conditions. Since summer tires do not have the sametraction performance as snow tires, summer tires are inadequate fordriving...

518 4-3. Do-it-yourself maintenance ■ Tire pressure warning system certification FCC ID: PAXPMV107JFCC ID: HYQ13BCX For vehicles sold in the U.S.A. This device complies with part 15 of the FCC Rules. Operation is subjectto the following two conditions: (1) This device may not cause harmfulinterferen...

519 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re NOTICE ■ Repairing or replacing tires, wheels, tire pressure warning valves,transmitters and tire valve caps ● When removing or fitting the wheels, tires or the tire pressure warningvalves and transmitters, contact your Toyota dealer as t...

520 4-3. Do-it-yourself maintenance Tire inflation pressure ■ Tire inflation pressure The recommended cold tire inflation pressure and tire size aredisplayed on the tire and loading information label. ( → P. 628) CTH43AS078

521 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Tire inflation pressure check interval You should check tire inflation pressure every two weeks, or at leastonce a month.Do not forget to check the spare. ■ Inspection and adjustment procedure Tire valveTire pressure gauge Remove the ti...

522 4-3. Do-it-yourself maintenance ■ Effects of incorrect tire inflation pressure Driving with incorrect tire inflation pressure may result in the following: ● Reduced fuel efficiency ● Reduced driving comfort and tire life ● Reduced safety ● Damage to the drive train If a tire needs frequent infla...

523 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION ■ Proper inflation is critical to save tire performance Keep your tires properly inflated. Otherwise, the following conditionsmay occur and result in an accident causing death or serious injury: ● Excessive wear ● Uneven wear ● Po...

524 4-3. Do-it-yourself maintenance Wheels If a wheel is bent, cracked or heavily corroded, it should bereplaced. Otherwise, the tire may separate from the wheel orcause a loss of handling control. ■ Wheel selection When replacing wheels, care should be taken to ensure thatthey are equivalent to tho...

525 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ When replacing wheels The wheels of your vehicle are equipped with tire pressure warning valvesand transmitters that allow the tire pressure warning system to provideadvanced warning in the event of a loss in tire inflation pressure. Wh...

526 4-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be cleaned or changed regularly tomaintain air conditioning efficiency. ■ Removal method Turn the engine switch (vehicles without a smart key sys-tem) or “ENGINE START STOP” switch (vehicles with asmart key ...

527 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Checking interval Inspect, clean and replace the air conditioning filter according to the mainte-nance schedule. In dusty areas or areas with heavy traffic flow, more fre-quent cleaning or early replacement may be required. (For schedul...

528 4-3. Do-it-yourself maintenance Wireless remote control/electronic key battery Replace the battery with a new one if it is depleted. ■ You will need the following items: ● Flathead screwdriver ● Lithium battery CR2016 (vehicles without a smart key sys-tem), or CR1632 (vehicles with a smart key s...

529 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Replacing the battery (vehicles with a smart key system) Take out the mechanical key. Remove the cover. To prevent damage to the key,cover the tip of the screwdriverwith a rag. Remove the depleted battery. Insert a new battery with the“...

530 4-3. Do-it-yourself maintenance ■ Use a CR2016 (vehicles without a smart key system) or CR1632 (vehi-cles with a smart key system) lithium battery ● Batteries can be purchased at your Toyota dealer, local electrical appli-ance shops or camera stores. ● Replace only with the same or equivalent ty...

531 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Checking and replacing fuses If any of the electrical components do not operate, a fuse may haveblown. If this happens, check and replace the fuses as necessary. Vehicles without a smart key system Turn the engine switch off. Vehicles wit...

532 4-3. Do-it-yourself maintenance After a system failure, see “Fuse layout and amperage rat-ings” ( → P. 535) for details about which fuse to check. Remove the fuse. Only type A fuse can beremoved using the pull-outtool. Check if the fuse is blown. Type A Normal fuseBlown fuse Replace the blown fu...

534 4-3. Do-it-yourself maintenance Type F Normal fuseBlown fuse Contact your Toyota dealer. CTH43AS076

535 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Fuse layout and amperage ratings ■ Engine compartment Fuse Ampere Circuit 1 PTC HTR NO.3 30 A PTC heater 2 DEF 30 A Rear window defogger 3 DEICER 20 A Windshield wiper de-icer 4 PTC HTR NO.2 30 A PTC heater 5 SUB BATT 30 A Trailer sub bat...

537 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re *: Replace the fuse with one of the same ampere rating as the origi- nal 38 EFI NO.2 7.5 A Multiport fuel injection system/sequential multiport fuel injec-tion system 39 ALT 120 A* HTR, 400W INV, A/C COMP, TOWING TAIL, SUB BATT, MIR HTR, ...

538 4-3. Do-it-yourself maintenance ■ Driver’s side instrument panel Fuse Ampere Circuit 1 TAIL 10 A Stop/tail lights 2 PANEL 7.5 A Instrument panel lights 3 GAUGE 7.5 A Meter and gauge 4 IGN 10 A Multiport fuel injection system/sequential multiport fuel injec-tion system, air bag system, smart key ...

540 4-3. Do-it-yourself maintenance ■ After a fuse is replaced ● If the lights do not turn on even after the fuse has been replaced, a bulbmay need replacement. ( → P. 541) ● If the replaced fuse blows again, have the vehicle inspected by yourToyota dealer. ■ If there is an overload in a circuit The...

541 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Light bulbs You may replace the following bulbs yourself. The difficulty level ofreplacement varies depending on the bulb. If necessary bulbreplacement seems difficult to perform, contact your Toyota dealer. For more information about rep...

543 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Unplug the connector whiledepressing the lock release. High beamLow beam ■ Parking light and front side marker light Turn the steering wheel in theopposite direction of the parkinglight and front side marker lightthat you wish to replace....

545 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Partly remove the fender liner. Unplug the connector whiledepressing the lock release. Turn the bulb base counterclock-wise. CTH43AS093 STEP 3 CTH43AS094 STEP 4 CTH43AS095 STEP 5

546 4-3. Do-it-yourself maintenance ■ Front turn signal light and daytime running light Turn the steering wheel in theopposite direction of the frontturn signal light and daytime run-ning light that you wish toreplace. For example, if you wish toreplace the front turn signal lightand daytime running...

547 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Turn the bulb base counterclock-wise. Remove the light bulb. CTH43AS060 STEP 4 CTH43AS125 STEP 5

548 4-3. Do-it-yourself maintenance ■ Stop/tail and rear side marker light and back-up light Open the back door and removethe cover. Using a flathead screwdriver orequivalent which is wrapped witha cloth. Turn the bulb base counterclock-wise. Stop/tail and rear side markerlightBack-up light Remove t...

549 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Rear turn signal light Open the back door and removethe cover. Using a flathead screwdriver orequivalent which is wrapped witha cloth. Turn the bulb base counterclock-wise. Remove the light bulb. CTH43AS042 STEP 1 CTH43AS045 STEP 2 CTH4...

550 4-3. Do-it-yourself maintenance ■ License plate light Remove the screws and lens. Remove the light bulb. ■ Lights other than the above If any of the lights listed below has burnt out, have your Toyotadealer replace it. ● Side turn signal lights (if equipped) ● High mounted stoplight ● Outer foot...

551 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ LED light bulbs The side turn signal lights and high mounted stoplight consist of a number ofLEDs. If any LEDs burn out, take your vehicle to your Toyota dealer to havethe light replaced. ■ Condensation build-up on the inside of the len...

554 5-1. Essential information Emergency flashers NOTICE ■ To prevent battery discharge Do not leave the emergency flashers on longer than necessary when theengine is not running. Use the emergency flashers if the vehicle malfunctions or isinvolved in an accident. Press the switch to flash allthe tu...

5 W hen tr ou ble ar ises 555 5-1. Essential information If your vehicle needs to be towed Before towing The following may indicate a problem with your transmission. Contactyour Toyota dealer before towing. ● The engine is running but the vehicle will not move. ● The vehicle makes an abnormal sound....

556 5-1. Essential information Vehicles with a front spoiler only:Before using the front emer-gency towing eyelet(s), removethe cover(s). Removing the clipsInstalling the clips Towing with a sling-type truck Do not tow with a sling-type truckto prevent body damage. CTH51AS007 CTH51AS008

5 W hen tr ou ble ar ises 557 5-1. Essential information Towing with a wheel lift-type truck From the front Use a towing dolly under the rearwheels. From the rear (2WD models) Vehicles without a smart keysystem: Turn the engine switchto the “ACC” position so that thesteering wheel is unlocked. Vehic...

558 5-1. Essential information Using a flatbed truck If you use chains or cables to tiedown your vehicle, the anglesshaded in black must be 45 ° . Do not overly tighten the tiedowns or the vehicle may bedamaged. ■ Before emergency towing Vehicles without a smart key system: Turn the engine switch to...

5 W hen tr ou ble ar ises 559 5-1. Essential information CAUTION ■ Caution while towing ● Use extreme caution when towing the vehicle.Avoid sudden starts or erratic driving maneuvers which place excessivestress on the emergency towing eyelets and the cables or chains. Alwaysuse caution for the surro...

560 5-1. Essential information NOTICE ■ To prevent body damage when towing with a sling-type truck Do not tow with a sling-type truck, either from the front or rear. ■ To prevent causing serious damage to the transmission and transfer(4WD models) in emergency towing Never tow a vehicle from the rear...

5 W hen tr ou ble ar ises 561 5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probablyneeds adjustment or repair. Contact your Toyota dealer as soon aspossible. ■ Visible symptoms ● Fluid leaks under the vehicle(Water dripping from...

562 5-1. Essential information Fuel pump shut off system Follow the procedure below to restart the engine after the system isactivated. Vehicles without a smart key system Turn the engine switch to the “ACC” or “LOCK” position.Restart the engine. Vehicles with a smart key system Turn the “ENGINE STA...

5 W hen tr ou ble ar ises 563 5-1. Essential information Event data recorder In a crash or near crash event The SRS airbag sensor assembly contains the EDR. In a crash ornear crash event, this device may record some or all of the followinginformation: ● Gasoline engine speed ● Whether the brake peda...

564 5-1. Essential information Disclosure of the data Toyota will not disclose the data recorded in an EDR to a third partyexcept when: ● An agreement from the vehicle’s owner (or the leasing company fora leased vehicle) is obtained ● Officially requested to by the police or other authorities ● Nece...

5 W hen tr ou ble ar ises 565 5-2. Steps to take in an emergency If a warning light turns on or a warning buzzer sounds Stop the vehicle immediately. Continuing to drive the vehiclemay be dangerous. The following warning indicates a possible problem in the brake sys-tem. Immediately stop the vehicle...

566 5-2. Steps to take in an emergency Stop the vehicle immediately. The following warnings indicate the possibility of damage to the vehi-cle that may lead to an accident. Immediately stop the vehicle in asafe place and contact your Toyota dealer. Have the vehicle inspected by your Toyota dealer im...

5 W hen tr ou ble ar ises 567 5-2. Steps to take in an emergency Follow the correction procedures. After taking the specified steps to correct the suspected problem,check that the warning light goes off. Warning light Warning light/Details (U.S.A.) (Canada) ABS warning light Indicates a malfunction ...

5 W hen tr ou ble ar ises 569 5-2. Steps to take in an emergency * 1 : Open door warning buzzer: The open door warning buzzer sounds to alert one or more of the doors isnot fully closed (with the vehicle having reached a speed of 3 mph [5 km/h]). * 2 : Driver’s and front passenger’s seat belt buzzer...

572 5-2. Steps to take in an emergency ■ SRS warning light This warning light system monitors the airbag sensor assembly, front airbagsensors, side and curtain shield airbag sensors, curtain shield airbag sen-sors, floor sensor, driver's seat belt buckle switch, front passenger occupantclassificatio...

5 W hen tr ou ble ar ises 573 5-2. Steps to take in an emergency ■ The tire pressure warning light may come on due to natural causes The tire pressure warning light may come on due to natural causes suchas natural air leaks and tire inflation pressure changes caused by tem-perature. In this case, ad...

574 5-2. Steps to take in an emergency ■ If the tire pressure warning system is not functioning The tire pressure warning system will be disabled in the following condi-tions:(When the condition becomes normal, the system will work properly.) ● If tires not equipped with tire pressure warning valves...

5 W hen tr ou ble ar ises 575 5-2. Steps to take in an emergency CAUTION ■ If the tire pressure warning light comes on Be sure to observe the following precautions. Failure to do so couldcause a loss of vehicle control and result in death or serious injury. ● Stop your vehicle in a safe place as soo...

576 5-2. Steps to take in an emergency CAUTION ■ Maintenance of the tires Each tire, including the spare (if provided), should be checked monthlywhen cold and inflated to the inflation pressure recommended by thevehicle manufacturer on the vehicle placard or tire inflation pressurelabel (tire and lo...

5 W hen tr ou ble ar ises 577 5-2. Steps to take in an emergency CAUTION Your vehicle has also been equipped with a TPMS (tire pressure warningsystem) malfunction indicator to indicate when the system is not operat-ing properly. The TPMS (tire pressure warning system) malfunction indi-cator is combi...

578 5-2. Steps to take in an emergency If you have a flat tire Remove the flat tire and replace it with the spare tire provided. ■ Before jacking up the vehicle ● Stop the vehicle on a hard, flat surface. ● Set the parking brake. ● Shift the shift lever to P. ● Stop the engine. ● Turn on the emergen...

5 W hen tr ou ble ar ises 579 5-2. Steps to take in an emergency Taking out the jack and tool bag Remove the cover. Unhook and take out the toolbag. Take out the jack. For looseningFor tightening CTH52AS020 STEP 1 CTH52AS004 STEP 2 CTH52AS035 STEP 3

580 5-2. Steps to take in an emergency Taking out the spare tire Assembling the jack handle. Remove the jack handle and the jack handle extension bar from thetool bag and assembly by following these steps. Loosen the bolt and the screwusing either the jack handle ora screwdriver. Assemble the jack h...

582 5-2. Steps to take in an emergency Replacing a flat tire Chock the tires. Remove the wheel ornamentusing the wheel ornamentremover. To protect the wheel ornament,place a rag between the wheelornament remover and thewheel ornament, as shown inthe illustration. CTH52AS038 STEP 1 Flat tire Wheel ch...

5 W hen tr ou ble ar ises 585 5-2. Steps to take in an emergency Remove all the wheel nuts andthe tire. When resting the tire on theground, place the tire so that thewheel design faces up to avoidscratching the wheel surface. Installing the spare tire Remove any dirt or foreign mat-ter from the whee...

5 W hen tr ou ble ar ises 587 5-2. Steps to take in an emergency Stowing the flat/spare tire, jack and tools Lay down the tire with the outerside facing up, and install theholding bracket. Raise the tire. Vehicles with kinetic dynamic suspension: Pull the tire towardthe rear of the vehicle when rais...

588 5-2. Steps to take in an emergency CAUTION ■ Using the tire jack Improper use of the tire jack may cause the vehicle to suddenly fall offthe jack, leading to death or serious injury. ● Do not use the tire jack for any purpose other than replacing tires orinstalling and removing tire chains. ● On...

5 W hen tr ou ble ar ises 589 5-2. Steps to take in an emergency CAUTION ■ Using the jack handle Tighten all the jack handle bolts securely using a Phillips-head screw-driver, to prevent the extension parts from coming apart unexpectedly. ■ Replacing a flat tire Observe the following precautions to ...

590 5-2. Steps to take in an emergency NOTICE ■ Do not drive the vehicle with a flat tire Do not continue driving with a flat tire.Driving even a short distance with a flat tire can damage the tire and thewheel beyond repair. ■ When stowing the flat tire Ensure that there is no object caught between...

5 W hen tr ou ble ar ises 591 5-2. Steps to take in an emergency If the engine will not start If the engine will not start even though correct starting proceduresare being followed ( → P. 164, 167), consider each of the following points: ■ The engine will not start even though the starter motoropera...

592 5-2. Steps to take in an emergency Emergency start function (vehicles with a smart key system) When the engine does not start, the following steps can be used asan interim measure to start the engine if the “ENGINE START STOP”switch is functioning normally: Set the parking brake.Shift the shift ...

5 W hen tr ou ble ar ises 595 5-2. Steps to take in an emergency If you lose your keys New genuine keys can be made by your Toyota dealer. For vehicleswith the smart key system, bring the other key and the key numberstamped on the key number plate. For vehicles without the smart keysystem, bring a m...

596 5-2. Steps to take in an emergency If you cannot operate back door opener If the back door opener does not operate, there may be a problemwith the back door opener system. Have the vehicle inspected byyour Toyota dealer immediately. The following steps may be used as an emergency measure toensur...

5 W hen tr ou ble ar ises 597 5-2. Steps to take in an emergency If the electronic key does not operate properly (vehicles with a smart key system) Locking and unlocking the doors Use the mechanical key ( → P. 31) in order to perform the fol-lowing operations: Locks all doors Unlocks all doorsTurnin...

598 5-2. Steps to take in an emergency Changing “ENGINE START STOP” switch modes and starting theengine Ensure that the shift lever is in P and depress the brake pedal. Touch the Toyota emblem side ofthe electronic key to the“ENGINE START STOP” switch. If any of the doors is opened orclosed while th...

5 W hen tr ou ble ar ises 599 5-2. Steps to take in an emergency If the vehicle battery is discharged The following procedures may be used to start the engine if the vehi-cle's battery is discharged.You can also call your Toyota dealer or a qualified repair shop. If you have a set of jumper (or boos...

600 5-2. Steps to take in an emergency 4.0 L V6 (1GR-FE) engine Connect the jumper cables according to the following procedure: Connect a positive jumper cable clamp to the positive (+) batteryterminal on your vehicle.Connect the clamp on the other end of the positive cable to thepositive (+) batter...

602 5-2. Steps to take in an emergency ■ Starting the engine when the battery is discharged The engine cannot be started by push-starting. ■ To prevent battery discharge ● Turn off the headlights and the audio system while the engine is off. ● Turn off any unnecessary electrical components when the ...

5 W hen tr ou ble ar ises 603 5-2. Steps to take in an emergency CAUTION ■ Avoiding battery fires or explosions Observe the following precautions to prevent accidentally igniting the flam-mable gas that may be emitted from the battery: ● Make sure each jumper cable is connected to the correct termin...

604 5-2. Steps to take in an emergency If your vehicle overheats If your engine overheats: Stop the vehicle in a safe place and turn off the air condi-tioning system.Check to see if steam is coming out from under the hood.If you see steam: Stop the engine. Carefully lift the hood after the steam sub...

5 W hen tr ou ble ar ises 605 5-2. Steps to take in an emergency ■ Overheating If you observe the following, your vehicle may be overheating: ● The engine coolant temperature gauge enters the red zone or a loss ofpower is experienced. ● Steam comes out from under the hood. CAUTION ■ To prevent an ac...

606 5-2. Steps to take in an emergency NOTICE ■ When adding engine coolant Wait until the engine has cooled down before adding engine coolant.When adding coolant, do so slowly. Adding cool coolant to a hot engine tooquickly can cause damage to the engine.

5 W hen tr ou ble ar ises 607 5-2. Steps to take in an emergency If the vehicle becomes stuck CAUTION ■ When attempting to free a stuck vehicle If you choose to push the vehicle back and forth to free it, make sure the sur-rounding area is clear to avoid striking other vehicles, objects or people. T...

608 5-2. Steps to take in an emergency If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop thevehicle in the normal way, stop the vehicle using the following pro-cedure: Steadily step on the brake pedal with both feet and firmlydepress it....

5 W hen tr ou ble ar ises 609 5-2. Steps to take in an emergency CAUTION ■ If the engine has to be turned off while driving ● Power assist for the brakes and steering wheel will be lost, making thebrake pedal harder to depress and the steering wheel heavier to turn.Decelerate as much as possible bef...

612 6-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions and weights * 1 : Unladen vehicle * 2 : With 5 occupants * 3 : With 7 occupants Overall length 189.8 in. (4820 mm) Overall width 75.8 in. (1925 mm) Overall height * 1 70.1 in. (1780 mm) Wheelbase 109.8 in. (2790 mm) Tread Fr...

613 6-1. Specifications 6 Vehicl e sp ecification s Vehicle identification ■ Vehicle identification number The vehicle identification number (VIN) is the legal identifier for yourvehicle. This is the primary identification number for your Toyota. It isused in registering the ownership of your vehicl...

614 6-1. Specifications ■ Engine number 2.7 L 4-cylinder (2TR-FE) engine The engine number is stampedon the engine block as shown. 4.0 L V6 (1GR-FE) engine The engine number is stampedon the engine block as shown. CTH61AS003 CTH61AS026

615 6-1. Specifications 6 Vehicl e sp ecification s Engine 2.7 L 4-cylinder (2TR-FE) engine 4.0 L V6 (1GR-FE) engine Fuel Model 2TR-FE Type 4-cylinder in line, 4-cycle, gasoline Bore and stroke 3.74 × 3.74 in. (95.0 × 95.0 mm) Displacement 164.4 cu.in. (2694 cm 3 ) Drive belt tension Automatic adjus...

616 6-1. Specifications Lubrication system ■ Engine oil selection “Toyota Genuine Motor Oil” is used in your Toyota vehicle. UseToyota approved “Toyota Genuine Motor Oil” or equivalent to satisfythe following grade and viscosity. Oil grade: ILSAC multigrade engine oil Recommended viscosity: SAE 0W-2...

617 6-1. Specifications 6 Vehicl e sp ecification s How to read oil container label: The ILSAC (International Lubricant Standardization and ApprovalCommittee) Certification Mark is added to some oil containers to helpyou select the oil you should use. CTH61AS018

618 6-1. Specifications Cooling system Ignition system Capacity 2.7 L 4-cylinder (2TR-FE) engine 8.6 qt. (8.1 L, 7.1 Imp. qt.) 4.0 L V6 (1GR-FE) engine 11.1 qt. (10.5 L, 9.2 Imp. qt.) Coolant type Use either of the following: • “Toyota Super Long Life Coolant” • A similar high-quality ethylene glyco...

619 6-1. Specifications 6 Vehicl e sp ecification s Electrical system Transfer (4WD models) * : “Toyota Genuine Transfer Gear oil LF” is put in your Toyota vehicle at the factory. Use Toyota approved “Toyota Genuine Transfer Gear oilLF” or an equivalent of matching quality to satisfy the above speci...

620 6-1. Specifications Front differential (4WD models) * : “Toyota Genuine Differential Gear Oil” is put in your Toyota vehicle at the factory. Use Toyota approved “Toyota Genuine Differential GearOil” or an equivalent of matching quality to satisfy the above specifi-cation. Please contact your Toy...

621 6-1. Specifications 6 Vehicl e sp ecification s Automatic transmission * : The fluid capacity is a reference quantity. If replacement is necessary, contact your Toyota dealer. Brakes * 1 : Minimum pedal clearance when depressed with a force of 110 lbf (490 N, 50 kgf) while the engine is running....

623 6-1. Specifications 6 Vehicl e sp ecification s Tires and wheels 2.7 L 4-cylinder (2TR-FE) engine 4.0 L V6 (1GR-FE) engine Tire size P265/70R17 113S Tire inflation pressure(Recommended cold tire inflation pressure) Front:33 psi (230 kPa, 2.3 kgf/cm 2 or bar) Rear:33 psi (230 kPa, 2.3 kgf/cm 2 or...

625 6-1. Specifications 6 Vehicl e sp ecification s Fuel information ■ Fuel tank opening for unleaded gasoline To help prevent incorrect fueling, your Toyota has a fuel tank opening thatonly accommodates the special nozzle on unleaded fuel pumps. ■ Gasoline quality In very few cases, driveability pr...

627 6-1. Specifications 6 Vehicl e sp ecification s ■ Non-recommendation of the use of gasoline containing MMT Some gasoline contains an octane enhancing additive called MMT (Methyl-cyclopentadienyl Manganese Tricarbonyl). Toyota does not recommend the use of gasoline that contains MMT. If fuelconta...

628 6-1. Specifications Tire information Typical tire symbols Tire size ( → P. 630) Summer tire or all season tires ( → P. 517) An all season tire has “M+S” on the sidewall. A tire not marked“M+S” is a summer tire. Uniform tire quality grading For details, see “Uniform Tire Quality Grading” that fol...

629 6-1. Specifications 6 Vehicl e sp ecification s Typical DOT and Tire Identification Number (TIN) DOT symbol * Tire Identification Number(TIN)Tire manufacturer’s identifica-tion markTire size codeManufacturer’s optional tiretype code (3 or 4 letters)Manufacturing weekManufacturing year * : The DO...

630 6-1. Specifications Tire size ■ Typical tire size information The illustration indicates typical tire size. Tire use(P = Passenger car, T = Temporary use)Section width (millimeters)Aspect ratio(tire height to section width)Tire construction code(R = Radial, D = Diagonal)Wheel diameter (inches)Lo...

631 6-1. Specifications 6 Vehicl e sp ecification s Tire section names BeadSidewallShoulderTreadBeltInner linerReinforcing rubberCarcassRim linesBead wiresChafer Uniform Tire Quality Grading This information has been prepared in accordance with regulationsissued by the National Highway Traffic Safet...

632 6-1. Specifications ■ Treadwear The treadwear grade is a comparative rating based on the wearrate of the tire when tested under controlled conditions on a speci-fied government test course. For example, a tire graded 150 would wear one and a half (1 - 1/2)times as well on the government course a...

633 6-1. Specifications 6 Vehicl e sp ecification s Warning: The temperature grades of a tire assume that it is properlyinflated and not overloaded.Excessive speed, underinflation, or excessive loading, either sepa-rately or in combination, can cause heat buildup and possible tire fail-ure. Glossary...

640 6-2. Customization Customizable features Item Function Default setting Customized setting Smart key system and wireless remote con-trol ( → P. 33, 47) Operation signal (Emergency flashers) On Off Operation signal (Buzzer) On Off Open door warning function (when locking the vehicle) On Off Automa...

646 6-3. Initialization Items to initialize Item When to initialize Reference Engine oil mainte-nance data After changing engine oil P. 501 The following item must be initialized for normal system operation incases such as after the battery is reconnected, or maintenance isperformed on the vehicle.

649 7 For owners Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructionsextracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions inEnglish. Utilisation correcte des ceintures...

650 Entretien et soin ■ Ceintures de sécurité Nettoyez avec un chiffon ou une éponge humectée d'eau savonneuse tiède.Profitez de l'occasion pour vérifier régulièrement que les ceintures ne sontpas effilochées, entaillées, ou ne paraissent pas exagérément usées. ATTENTION ■ Détérioration et usure des...

651 7 For owners SRS airbag instructions for Canadian owners (in French) The following is a French explanation of SRS airbag instructions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instruc- tions in English. Sacs de sécurité gonflabl...

652 Sacs de sécurité gonflables SRS latéraux et rideau Sacs de sécurité gonflables SRS latérauxParticipent à la protection du haut du corps des occupants dessièges avant Sacs de sécurité gonflables SRS rideauParticipent principalement à la protection de la tête desoccupants assis aux places extérieu...

653 7 For owners Composition du système de sacs de sécurité gonflables SRS Sacs de sécurité gonflableslatéraux Témoins indicateurs “AIRBAG ON” et “AIR BAG OFF” Sacs de sécurité gonflablesrideau Sac de sécurité gonflablepassager avant Sacs de sécurité gonflablesde genoux Capteurs de sacs de sécuritég...

655 7 For owners ATTENTION ■ Précautions avec les sacs de sécurité gonflables SRS Respectez les précautions suivantes concernant les sacs de sécuritégonflables SRS. À défaut, des blessures graves, voire mortelles, pourraient s'ensuivre. ● Le conducteur et tous les passagers à bord du véhicule doiven...

660 ATTENTION ■ Modification et mise au rebut des éléments du système de sacs desécurité gonflables SRS Consultez impérativement votre concessionnaire Toyota si vous avez besoind'intervenir sur votre véhicule ou de procéder à l'une des modificationssuivantes. Les sacs de sécurité gonflables SRS risq...

662 ATTENTION ■ En marche normale Assurez-vous que le témoin “RSCA OFF” n'est pas allumé. Si vous lelaissez en position marche, les sacs de sécurité gonflables rideau ne sedéploieront pas en cas d'accident, ce qui peut provoquer des blessuresgraves, voire mortelles.

664 Abbreviation list Abbreviation/Acronym list ABBREVIATIONS MEANING 2WD 2 Wheel Drive 4WD 4 Wheel Drive ABS Anti-lock Brake System ACC Accessory AI-SHIFT Artificial Intelligence Shift control ALR Automatic Locking Retractor A-TRAC Active traction control system AUTO LSD Automatic Limited Slip Diff...

666 Alphabetical index Alphabetical index A/C .....................................296, 302ABS ...........................................253Accessory meter ......................194Active head restraints ...............62Active traction control .............230Air conditioning filter..................

680 GAS STATION INFORMATION CTHPIAS030 Auxiliary catch lever P. 494 Fuel filler door P. 102 Tire inflation pressure P. 623 Hood lock release lever P. 494 Fuel tank capacity (Reference) 23.0 gal. (87.0 L, 19.1 Imp. gal.) Fuel type Unleaded gasoline only P. 615 Cold tire inflation pressure P. 623 Engi...