Toyota 2010 Matrix- Manuals

4 OVERVIEW Instrument cluster Service indicator and reminder TachometerSpeedometerFuel gaugeTrip meter reset/Instrument panel light controlEngine coolant temperatureAutomatic Transmission shift range display (if equipped)Odometer and two trip meters

5 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Indicator symbols Charging system warning 1 Brake system warning 1 AIR BAG ON and AIR BAG OFF indicator 1 Anti-lock Brake System warning 1 Headlight low/high beam indicator Turn signal indicator Slip indicator 1 Cruise control indicato...

6 OVERVIEW Keyless entry (if equipped) Push Push ONCE: Driver door TWICE: All doors Locking operation Unlocking operation Panic button Push and hold NOTE: If a door is not opened within 60 seconds of unlocking, all doors willrelock for safety. Fuel tank door release and cap NOTE: Tighten until one c...

7 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Hood release Pull up latchand raise hood Pull Engine coolant reservoirEngine oil filler capEngine oil level dipstickWindshield washer fluid tank Note: Regularly scheduled maintenance, including oil changes, will help extend the life of...

8 FEATURES/OPERATIONS Automatic Transmission (if equipped) * The ignition switch must be “ON” and the brake pedal depressed to shift from Park. Downshifting increases power going uphill, or provides engine brakingdownhill. For best fuel economy during normal driving conditions, alwaysdrive with the ...

9 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Seat adjustments-Rear Seat adjustments-Front Position (forward/backward)Height crank (driver side only)Seatback angle Fold down Pull Seats-Head restraints Front Rear Lock release button Lock release button

10 FEATURES/OPERATIONS Parking brake (2) Push Set Release (1) Pull slightly (3) Lower Pull Note: Do not attempt to adjust while the vehicle is in motion. Tilt and telescopic steering wheel Lock release lever Angle Length Hold wheel, push lever down,set angle and length, andreturn lever. Clock Hour s...

11 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Lights & turn signals Turn signals Headlights High beam flasher Low beam Front fog lights (if equipped) -Daytime Running Light system (DRL) Headlights turn on automatically upon starting engine. The brightness of the headlights wi...

12 FEATURES/OPERATIONS Windows-Power (if equipped) Up Down Driver side Window lock switch Automatic operation (driver side only) Push the switch completely down and release to fully open. To stop window midway, lightly push the switchin the opposite direction. Window lock switch Deactivates all pass...

14 FEATURES/OPERATIONS Audio CD PLAYER To scan tracks on a disc Push and hold “SCAN.” Push again to hold selection. CD changer (Type 2)-To load one disc Push “LOAD” and insert one disc. -To load multiple discs Push and hold “LOAD” until you hear a beep. Insert one disc. Shutter will close and then r...

15 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES RADIO To preset stations Tune in the desired station and hold down a preset button (1-6) until you hear a beep. Push desired preset button (1-6) toselect. To scan stations Push and hold “SCAN” to scan preset stations. Push again to ho...

16 FEATURES/OPERATIONS Air Conditioning/Heating Airflow vent Fan speed Temperature selectorAir Conditioning ON/OFFUse for quick cooling. MAX A/C changes air intake to recirculate.It is not possible to change intake to fresh, or to turn A/C OFF inthis mode.Outside rearview mirror/Rear window defogger...

17 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Cruise control (if equipped) 1 The set speed may also be cancelled by depressing the brake pedal. 2 The set speed may be resumed once vehicle speed exceeds 25 mph. Turning system ON/OFF Functions System ON/OFF Increase speed Decrease ...

18 FEATURES/OPERATIONS Bluetooth ® technology allows dialing or receive calls without taking hands from the steering wheel or using a cable to connect the compatibletelephone and the system. Refer to the Owner’s Manual for more details. Telephone controls (Bluetooth ® ) (if equipped) Vehicles withou...

19 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Power outlet-12V DC Power outlet-115V AC (if equipped) Designed for 12V car accessories.The engine switch must be in the “ACC” or “ON” position. The engine switch must be in the “ON” position. Push the AC115V switchto use outlet. ON/O...

20 Moving the lever to “LOCK” will allow the door to be opened only fromthe outside. Rear door Doors-Child safety locks System reset initialization 1. Push and hold “ SET” button until the indicator blinks three times. 2. Wait a few minutes to allow initialization to complete. Push up, or squeezeloc...

436 Abbreviation list Abbreviation/Acronym list ABBREVIATIONS MEANING 4WD 4 Wheel Drive A/C Air Conditioning ABS Anti-lock Brake System ACC Accessory ALR Automatic Locking Retractor AWD All Wheel Drive CRS Child Restraint System ECU Electronic Control Unit EDR Event Data Recorder ELR Emergency Locki...

18 For your information Main Owner’s Manual Please note that this manual covers all models and all equipment, includingoptions. Therefore, you may find some explanations for equipment notinstalled on your vehicle. All specifications provided in this manual are current at the time of printing.However...

20 CAUTION ■ General precautions while driving Driving under the influence: Never drive your vehicle when under the influ-ence of alcohol or drugs that have impaired your ability to operate your vehi-cle. Alcohol and certain drugs delay reaction time, impair judgment andreduce coordination, which co...

21 Symbols used throughout this manual Cautions & Notices Symbols used in illustrations CAUTION This is a warning against anything which may cause death or injury to people ifthe warning is ignored. You are informed about what you must or must not doin order to reduce the risk of injury to yours...

TABLE OF CONTENTS 1 1 Before driving Adjusting and operating features such as door locks, mirrors, and steering column. 2 When driving Driving, stopping and safe-driving information. 3 Interior fea- tures Air conditioning and audio systems, as well as other in- terior features for a comfortable driv...

6 Headlights (low beam) P. 132 Pictorial index Exterior Front fog lights ∗ P. 135 Hood P. 289 Windshield wipers P. 136 Outside rear view mirrors P. 54 Front turn signal/parking and front side marker lights P. 123, 132 Headlights (high beam) P. 133 Moon roof ∗ P. 58

8 Glove box P. 243 Front seats P. 37 SRS side airbags P. 70 Power window switches ∗ P. 56 SRS front passenger airbag P. 70 SRS driver airbag P. 70 Console box P. 243 Interior Pictorial index Floor mat P. 260 Head restraints P. 43 Bottle holders P. 247 Bottle holders P. 247 Grocery bag hook P. 257 Se...

9 A Vanity mirrors P. 251 Moon roof switches P. 58 Sun visors P. 250 SRS curtain shield airbags P. 70 Compass ∗ P. 268 Auxiliary box P. 248 ∗ : If equipped Vehicles with moon roof Interior lights P. 239 Anti-glare inside rear view mirror P. 52 Personal/interior lights P. 240

10 Interior lights P. 239 Vanity mirrors P. 251 Sun visors P. 250 SRS curtain shield airbags P. 70 Personal lights P. 241 Anti-glare inside rear view mirror P. 52 Pictorial index Interior A Vehicles without moon roof

17 D VSC/TRAC off switch ∗ P. 142 Auxiliary box P. 248 ∗ : If equipped Hood lock release lever P. 289

TABLE OF CONTENTS Index 2 1-1. Key information Keys ..................................... 24 1-2. Opening, closing and locking the doors Wireless remote control ....... 26Doors.................................... 29Back door ............................. 33 1-3. Adjustable components (seats, mirrors...

1 2 3 4 5 6 7 3 2-5. Driving information Cargo and luggage ............. 147Vehicle load limits ............... 150Winter driving tips ............... 151Trailer towing ...................... 155Dinghy towing (automatic transmission) .................... 163 Dinghy towing (manual transmission) ........

TABLE OF CONTENTS Index 4 4-1. Maintenance and care Cleaning and protecting the vehicle exterior ........... 274 Cleaning and protecting the vehicle interior ............ 276 4-2. Maintenance Maintenance requirements .................... 279 General maintenance ......... 281Emission inspection and m...

1 2 3 4 5 6 7 5 6-1. Specifications Maintenance data (fuel, oil level, etc.) ............ 396 Fuel information .................. 412Tire information ................... 415 6-2. Customization Customizable features ........ 427 6-3. Initialization Items to initialize ................. 429 Reporting ...

24 1-1. Key information Keys ■ Key number plate Keep the plate in a safe place such as your wallet, not in the vehicle. In theevent that a key is lost, a new key can be made by your Toyota dealer usingthe key number plate. ( → P. 385) ■ When riding in an aircraft When bringing a wireless remote cont...

25 1-1. Key information 1 Before driving NOTICE ■ To prevent key damage ● Do not subject the keys to strong shocks, expose them to high tempera-tures by placing them in direct sunlight, or get them wet. ● Do not expose the keys to electromagnetic materials or attach any mate-rial that blocks electro...

26 1-2. Opening, closing and locking the doors Wireless remote control ∗ ■ Operation signals A buzzer sounds and the emergency flashers flash to indicate that the doorshave been locked/unlocked. (Locked: Once; Unlocked: Twice) ■ Door lock buzzer If a door is not fully closed, a buzzer sounds continu...

27 1-2. Opening, closing and locking the doors 1 Before driving ■ Key battery depletion If the wireless remote control function does not operate, the battery may bedepleted. Replace the battery when necessary. ( → P. 325) ■ Security feature If a door is not opened within approximately 60 seconds aft...

28 1-2. Opening, closing and locking the doors ■ Certification for wireless remote control For vehicles sold in the U.S.A. NOTE:This device complies with Part 15 of the FCC Rules. Operation is subject tothe following two conditions: (1) This device may not cause harmful interfer-ence, and (2) this d...

29 1 1-2. Opening, closing and locking the doors Before driving Doors The vehicle can be locked and unlocked using the wireless remotecontrol, key or door lock switch. ■ Wireless remote control (if equipped) → P. 26 ■ Key Locks the doorUnlocks the door Vehicles with power door lock system: Turning t...

30 1-2. Opening, closing and locking the doors Rear door child-protector lock The door cannot be opened frominside the vehicle when the locksare set. These locks can be set to preventchildren from opening the reardoors. Push down on each reardoor switch to lock both reardoors. Automatic door locking...

31 1-2. Opening, closing and locking the doors 1 Before driving ■ Setting and canceling the functions To switch between set and canceled, follow the procedure below: Close all the doors and switch the engine switch to the “ON”position. (Perform step 2 within 10 seconds.) Shift the shift lever to P o...

32 1-2. Opening, closing and locking the doors ■ When all the doors are locked with the wireless remote control or key The doors cannot be unlocked with the door lock switch. The door lock switch can be reset by unlocking all the doors with the wire-less remote control or key. ■ The doors cannot be ...

33 1 1-2. Opening, closing and locking the doors Before driving Back door ■ Back door handle The back door can be locked and unlocked using the wirelessremote control or key. Wireless remote control (if equipped) → P. 26 Key Locks the back doorUnlocks the back doorOpens the back door Use the back do...

34 1-2. Opening, closing and locking the doors CAUTION ■ Caution while driving ● Keep the back door closed while driving. If the back door is left open, it may hit nearby objects while driving or lug-gage may be unexpectedly thrown out, causing an accident.In addition, exhaust gases may enter the ve...

36 1-2. Opening, closing and locking the doors NOTICE ■ Back door damper stays The back door is equipped with damper stays that hold the back door inplace. Observe the following precautions.Failure to do so may cause damage to the back door damper stay, resultingin malfunction. ● Do not attach any f...

37 1 Before driving 1-3. Adjustable components (seats, mirrors, steering wheel) Front seats Folding down the front passenger's seat (vehicles with seatback table) Move the seat rearward. Seat position adjustmentleverSeatback angle adjustmentleverVertical height adjustmentlever (driver’s side only) S...

38 1-3. Adjustable components (seats, mirrors, steering wheel) Lower the head restraint and fixthe seatback at the most uprightlock position. Pull up either seatback lockrelease knob beside the seat-back and fold the seatbackdown. Active head restraints When the occupant’s backpresses against the se...

39 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving ■ Active head restraints Even small forces applied to the seatback may cause the head restraint tomove. Pushing up a locked head restraint forcibly may appear the headrestraint inner structure. These do not indicate prob...

40 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ After returning the seatback to the upright position (vehicles with seat-back table) Make sure the seatback is securely locked by pressing forward and rear-ward on the top of the seatback. Failure to do so will prevent seat bel...

41 1 1-3. Adjustable components (seats, mirrors, steering wheel) Before driving Rear seats The seatbacks of the rear seats can be folded down. Stow the rear outside seat beltbuckles and move the rearcenter seat belt buckle asshown. Lower the head restraints tothe lowest position. Fold the seatback d...

42 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ After returning the seatback to the upright position Observe the following precautions. Failure to do so may result in death orserious injury. ● Check that the seat belts are not twisted or caught in the seatback. ■ Caution whi...

43 1 1-3. Adjustable components (seats, mirrors, steering wheel) Before driving Head restraints ■ Removing the head restraints ■ Installing the head restraints Head restraints are provided for all seats. Up Pull the head restraints up. Down Push the head restraint downwhile pushing the lock releaseb...

44 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Adjusting the height of the head restraints ■ Adjusting the rear center seat head restraint Always raise the head restraint one level from the stowed position whenusing. CAUTION ■ Head restraint precautions Observe the following precau...

45 1 1-3. Adjustable components (seats, mirrors, steering wheel) Before driving Seat belts Make sure that all occupants are wearing their seat belts before driv-ing the vehicle. ■ Correct use of the seat belts ● Extend the shoulder belt sothat it comes fully over theshoulder, but does notcome into c...

46 1-3. Adjustable components (seats, mirrors, steering wheel) Seat belt pretensioners (front seats) The pretensioner helps the seatbelt to quickly restrain the occu-pant by retracting the seat beltwhen the vehicle is subjected tocertain types of severe frontalcollision. The pretensioner may not act...

47 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving ■ Pregnant women ■ People suffering illness Obtain medical advice and wear the seat belt in the proper way. ■ Child seat belt usage The seat belts of your vehicle were principally designed for persons of adultsize. ● Use...

48 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION Observe the following precautions to reduce the risk of injury in the event ofsudden braking, sudden swerving or an accident.Failing to do so may cause death or severe injury. ■ Wearing a seat belt ● Ensure that all passengers we...

49 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving CAUTION ■ Seat belt pretensioners ● Do not place anything, such as a cushion, on the front passenger's seat.Doing so will disperse the passenger's weight, which prevents the sensorfrom detecting the passenger's weight pr...

50 1-3. Adjustable components (seats, mirrors, steering wheel) NOTICE ■ When using a seat belt extender When releasing the seat belt, press on the buckle release button on theextender, not on the seat belt.This helps prevent damage to the vehicle interior and the extender itself.

51 1 1-3. Adjustable components (seats, mirrors, steering wheel) Before driving Steering wheel CAUTION ■ Caution while driving Do not adjust the steering wheel while driving.Doing so may cause the driver to mishandle the vehicle and cause an acci-dent, resulting in death or serious injury. ■ After a...

52 1-3. Adjustable components (seats, mirrors, steering wheel) Anti-glare inside rear view mirror Glare from the headlights of vehicles behind can be reduced byusing the following functions. Manual anti-glare inside rear view mirror Normal positionAnti-glare position Auto anti-glare inside rear view...

53 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving ■ To prevent sensor error CAUTION ■ Caution while driving Do not adjust the position of the mirror while driving.Doing so may lead to mishandling of the vehicle and an accident, resulting indeath or serious injury. To en...

54 1-3. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors Folding back the mirrors Push backward to fold the mir-rors. Mirror angle can be adjusted using the switch. Select a mirror to adjust. LeftRight Adjust the mirror. UpRightDownLeft STEP 1 STEP 2

55 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving ■ Mirror angle can be adjusted when The engine switch is in the “ACC” or “ON” position. ■ When the mirrors are fogged up (vehicles with outside rear view mirrordefoggers) Turn on the mirror defoggers to defog the mirrors...

56 1-4. Opening and closing the windows Power windows ∗ Lock switch Press the switch down to lockthe passenger window switches. Use this switch to prevent chil-dren from accidentally opening orclosing a passenger window. The power windows can be opened and closed using the followingswitches. Closing...

57 1-4. Opening and closing the windows 1 Before driving CAUTION ■ Closing the windows Observe the following precautions. Failing to do so may result in death or serious injury. ● Check to make sure that all passengers do not have any part of their bodyin a position where it could be caught when a w...

58 1-4. Opening and closing the windows Moon roof ∗ Use the overhead switches to open, close, and tilt the moon roof upand down. ■ Opening and closing Open* The moon roof stops slightlybefore the fully opened posi-tion.Push the switch again to fullyopen. Close* *: Push the switch in either direc- ti...

59 1-4. Opening and closing the windows 1 Before driving ■ The moon roof can be operated when The engine switch is in the “ON” position. ■ Operating the moon roof after turning the engine OFF The moon roof can be operated for approximately 45 seconds after theengine switch is turned to the “ACC” or ...

60 1-4. Opening and closing the windows CAUTION ■ Opening the moon roof Observe the following precautions.Failing to do so may cause death or serious injury. ● Do not allow any passengers to put their hands or heads outside the vehi-cle while it is moving. ● Do not sit on top of the moon roof. ■ Clo...

61 1 Before driving 1-5. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap. ■ Before refueling the vehicle Turn the engine switch OFF and ensure that all the doors andwindows are closed. ■ Opening the fuel tank cap Pull up the fuel filler dooropener. Turn the ...

62 1-5. Refueling Closing the fuel tank cap When replacing the fuel tankcap, turn it until a clicking soundis heard. After releasing your hand, the capwill turn slightly to the oppositedirection. ■ Fuel type Unleaded gasoline (Octane rating 87 [Research Octane Number 91] orhigher) ■ Fuel tank capaci...

63 1-5. Refueling 1 Before driving CAUTION ■ Refueling the vehicle Observe the following precautions while refueling the vehicle. Failure to do so may result in death or serious injury. ● Touch the vehicle or some other metal surface to discharge any staticelectricity.Sparks resulting from dischargi...

64 1-5. Refueling NOTICE ■ Refueling Do not spill fuel during refueling.Doing so may damage the vehicle, such as causing the exhaust systems tooperate abnormally or damaging fuel system components or the vehicle'spainted surface.

65 1 Before driving 1-6. Theft deterrent system Engine immobilizer system ■ System maintenance The vehicle has a maintenance-free type of engine immobilizer system. ■ Conditions that may cause the system to malfunction ● If the key is in contact with a metallic object ● If the key is in close proxim...

66 1-6. Theft deterrent system CAUTION Changes or modifications not expressly approved by the party responsiblefor compliance could void the user’s authority to operate the equipment. NOTICE ■ To prevent damage to the key Do not modify, remove or disable the engine immobilizer system. If anyunauthor...

68 1-7. Safety information Correct driving posture Drive in a good posture as follows: Sit upright and well back inthe seat. ( → P. 37) Adjust the position of theseat forward or backward toensure the pedals can bereached and easilydepressed to the extentrequired. ( → P. 37) Adjust the seatback so th...

69 1-7. Safety information 1 Before driving CAUTION ■ While driving ● Do not adjust the position of the driver's seat while driving.Doing so could cause the driver to lose control of the vehicle. ● Do not place a cushion between the driver or passenger and the seatback.A cushion may prevent correct ...

70 1-7. Safety information SRS airbags The SRS airbags inflate when the vehicle is subjected to certaintypes of severe impacts that may cause significant injury to theoccupants. They work together with the seat belts to help reduce therisk of death or serious injury. Front airbagsDriver airbag and f...

71 1-7. Safety information 1 Before driving Airbag system components Your vehicle is equipped with ADVANCED AIRBAGS designed basedon US motor vehicle safety standards (FMVSS208). The airbag sys-tem controls airbag deployment power for the driver and front pas-senger. The driver airbag system consist...

73 1-7. Safety information 1 Before driving ■ SRS warning light This warning light system monitors the airbag sensor assembly, front airbagsensors, side and curtain shield airbag sensors, curtain shield airbag sen-sors, driver's seat position sensor, driver's seat belt buckle switch, front pas-senge...

74 1-7. Safety information ■ SRS airbag deployment conditions (side airbags) ● The SRS side airbags and curtain shield airbags will deploy in the eventof an impact that exceeds the set threshold level (the level of force corre-sponding to the impact force produced by a 3300 lb. [1500 kg] vehiclecoll...

76 1-7. Safety information ■ When to contact your Toyota dealer In the following cases, contact your Toyota dealer as soon as possible. Donot disconnect the battery cables before contacting your Toyota dealer. ● Any of the SRS airbags have been inflated. ● The front of the vehicle is damaged ordefor...

77 1-7. Safety information 1 Before driving CAUTION ■ SRS airbag precautions Observe the following precautions regarding the airbags. Failure to do so may cause death or serious injury. ● The driver and all passengers in the vehicle must wear their seat beltsproperly.The SRS airbags are supplemental...

80 1-7. Safety information CAUTION ■ SRS airbag precautions ● Do not use seat accessories which cover the parts where the SRS sideairbags inflate as they may interfere with inflation of the airbags. ● Do not strike or apply significant levels of force to the area of the SRS air-bag components ( → P....

81 1-7. Safety information 1 Before driving CAUTION ■ SRS airbag precautions ● If breathing becomes difficult after the SRS airbag has deployed, open adoor or window to allow fresh air in, or leave the vehicle if it is safe to doso. Wash off any residue as soon as possible to prevent skin irritation...

82 1-7. Safety information Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classifica-tion system. This system detects the conditions of the front passen-ger seat and activates or deactivates the devices for the frontpassenger. SRS warning ligh...

83 1-7. Safety information 1 Before driving Conditions and operation of the front passenger occupant classification system ■ Adult *1 ■ Child *3 or child restraint system *4 Indicator/ warning light “AIR BAG ON” and “AIR BAG OFF” indicator lights “AIR BAG ON” SRS warning light Off Front passenger’s ...

84 1-7. Safety information ■ Unoccupied ■ There is a malfunction in the system *1 : The system judges a person of adult size as an adult. When a smaller adult sits in the front passenger seat, the system may rec-ognize him/her as a child depending on his/her physique and pos-ture. *2 : In the event ...

85 1-7. Safety information 1 Before driving *4 : Never install a rear-facing child restraint system on the front pas- senger seat. A forward-facing child restraint system should onlybe installed on the front passenger seat when it is unavoidable.( → P. 87) *5 : In case the indicator is not illuminat...

86 1-7. Safety information CAUTION ■ Front passenger occupant classification system precautions ● Do not recline the front passenger seatback so far that it touches a rearseat. This may cause the “AIR BAG OFF” indicator light to be illuminated,which indicates that the passenger’s airbags will not de...

87 1 1-7. Safety information Before driving Child restraint systems Points to remember Studies have shown that installing a child restraint system on a rearseat is much safer than installing one to the front passenger seat. ● Choose a child restraint system that suits your vehicle and isappropriate ...

88 1-7. Safety information Types of child restraints Child restraint systems are classified into the following 3 typesaccording to the age and size of the child. Rear facing ⎯ Infant seat/convertible seat Forward facing ⎯ Convertible seat Booster seat

89 1-7. Safety information 1 Before driving ■ Selecting an appropriate child restraint system ● Use a child restraint system appropriate for the child until the childbecomes large enough to properly wear the vehicle’s seat belt. ● If a child is too large for a child restraint system, sit the child o...

91 1 1-7. Safety information Before driving Installing child restraints Follow the child restraint system manufacturer's instructions. Firmlysecure child restraints to the rear seats using the LATCH anchors ora seat belt. Attach the top tether strap when installing a childrestraint. The lap/shoulder...

92 1-7. Safety information Installation with LATCH system Type A Widen the gap betweenthe seat cushion andseatback slightly.Latch the hooks of thelower straps onto theLATCH anchors.If the child restraint has atop tether strap, the toptether strap should belatched onto the toptether strap anchors. Fo...

93 1-7. Safety information 1 Before driving Type B Widen the gap betweenthe seat cushion andseatback slightly.Latch the buckles ontothe LATCH anchors.If the child restraint has atop tether strap, the toptether strap should belatched onto the toptether strap anchors. For owners in Canada:A symbol on ...

95 1-7. Safety information 1 Before driving While pushing the child seatdown into the rear seat, allow theshoulder belt to retract until thechild seat is securely in place. After the shoulder belt hasretracted to a point where there isno slack in the belt, pull the belt tocheck that it cannot be ext...

96 1-7. Safety information While pushing the child seat intothe rear seat, allow the shoulderbelt to retract until the child seatis securely in place. After the shoulder belt hasretracted to a point where there isno slack in the belt, pull the belt tocheck that it cannot be extended. If the child re...

97 1-7. Safety information 1 Before driving Removing a child restraint installed with a seat belt Push the release button and fullyretract the seat belt.

98 1-7. Safety information Child restraint systems with a top tether strap Secure the child restraint usingthe seat belt lower anchors, andremove the head restraint. Open the anchor bracket cover,latch the hook onto the anchorbracket and tighten the top tetherstrap. Make sure the top tether strap is...

99 1-7. Safety information 1 Before driving CAUTION ■ When installing a booster seat Do not fully extend the shoulder belt to prevent the belt from going to ALRlock mode: ( → P. 46) ALR mode causes the belt to tighten only which could cause injury or dis-comfort to the child. ■ When installing a chi...

100 1-7. Safety information CAUTION ■ When installing a child restraint system ● When a booster seat is installed, always ensure that the shoulder belt ispositioned across the center of the child's shoulder. The belt should bekept away from the child's neck, but not so that it could fall off the chi...

102 2-1. Driving procedures Driving the vehicle The following procedures should be observed to ensure safe driv-ing. ■ Starting the engine → P. 112 ■ Driving Automatic transmission With the brake pedal depressed, shift the shift lever to D. ( → P. 116) Release the parking brake. ( → P. 124) Graduall...

103 2-1. Driving procedures 2 When drivin g ■ Parking the vehicle Automatic transmission With the shift lever in D, depress the brake pedal.Set the parking brake. ( → P. 124) Shift the shift lever to P. ( → P. 116) When parking on a hill, if necessary, block the wheels. Turn the engine switch to the...

104 2-1. Driving procedures Starting on a steep uphill Automatic transmission Firmly set the parking brake and shift the shift lever to D.Gently depress the accelerator pedal.Release the parking brake. Manual transmission With the parking brake firmly set and the clutch pedal fullydepressed, shift t...

105 2-1. Driving procedures 2 When drivin g ■ Drum-in-disc type parking brake system (if equipped) Your vehicle has a drum-in-disc type parking brake system. This type ofbrake system needs bedding-down of the brake shoes periodically or when-ever the parking brake shoes and/or drum are replaced. Hav...

107 2-1. Driving procedures 2 When drivin g CAUTION ● Do not adjust the position of the steering wheel, the seat, or the inside oroutside rear view mirrors while driving. Doing so may result in a loss ofvehicle control that can cause accidents that may result in death or seriousinjury. ● Always chec...

108 2-1. Driving procedures CAUTION ■ When the vehicle is stopped ● Do not race the engine. If the vehicle is in any gear other than P (vehicleswith an automatic transmission) or N, the vehicle may accelerate suddenlyand unexpectedly, and may cause an accident. ● Do not leave the vehicle with the en...

109 2-1. Driving procedures 2 When drivin g CAUTION ● If the vehicle is in a poorly ventilated area, stop the engine. In a closedarea, such as a garage, exhaust gases may collect and enter the vehicle.This may lead to death or a serious health hazard. ● The exhaust should be checked occasionally. If...

110 2-1. Driving procedures CAUTION ■ If the vehicle becomes stuck or bogged (AWD models) Do not spin the wheels recklessly when any of the tires is up in the air, orstuck in sand or mud, etc. This may damage the drive system componentsor propel the vehicle forward (or in another direction) and caus...

111 2-1. Driving procedures 2 When drivin g NOTICE ● When driving over bumps in the road, drive as slowly as possible to avoiddamaging the wheels, underside of the vehicle, etc. ■ If you hear a squealing or scraping noise (brake pad wear limit indica-tors) Have the brake pads checked and replaced by...

113 2-1. Driving procedures 2 When drivin g ■ Changing engine switch position “LOCK” The steering wheel is lockedand the key can be removed.(Vehicles with an automatictransmission: The key can beremoved only when the shiftlever is in P.) “ACC” Some electrical componentssuch as the audio system canbe...

114 2-1. Driving procedures ■ Turning the engine switch from “ACC” to “LOCK” ■ Steering lock release ■ If the engine does not start The engine immobilizer system may not have been deactivated. ( → P. 65) ■ Key reminder buzzer A buzzer sounds if the driver’s door is opened while the engine switch is ...

115 2-1. Driving procedures 2 When drivin g NOTICE ■ To prevent battery discharge Do not leave the key in the “ACC” or “ON” position for long periods if theengine is not running. ■ When starting the engine ● 2.4 L 4-cylinder (2AZ-FE) engine ⎯ Do not crank for more than 30 sec- onds at a time. This m...

116 2-1. Driving procedures Automatic transmission ∗ Select a shift position appropriate for the driving conditions. ■ Shifting the shift lever Standard type Multi-mode type While the engine switch is in the “ON” position, depress thebrake pedal and move the shift lever. ∗ : If equipped

117 2-1. Driving procedures 2 When drivin g ■ Shift position uses * 1 : Shifting to the D position allows the system to select a gear suitable for driving conditions. Setting the shift lever to the D position is recom-mended for normal driving. * 2 : Selecting shift ranges using S mode restricts the...

119 2-1. Driving procedures 2 When drivin g ■ Shift ranges and their functions A lower shift range will provide greater engine braking forces than ahigher shift range. ■ Downshifting restrictions (standard type) The shift lever cannot be downshifted if the following speeds are exceeded. 2.4 L 4-cyli...

120 2-1. Driving procedures ■ Downshifting restrictions (multi-mode type) To help ensure safety and driving performance, downshifting operation maysometimes be restricted. In some circumstances, downshifting may not bepossible even when the shift lever is operated. (The warning buzzer willsound twic...

122 2-1. Driving procedures ■ Maximum allowable speeds Observe the following maximum allowable speeds in each gear when maxi-mum acceleration is necessary. 2.4 L 4-cylinder (2AZ-FE) engine (without double wishbone rear suspen-sion) mph (km/h) 2.4 L 4-cylinder (2AZ-FE) engine (with double wishbone re...

123 2-1. Driving procedures 2 When drivin g Turn signal lever ■ Turn signals can be operated when The engine switch is in the “ON” position. ■ If the indicators flash faster than usual Check that a light bulb in the front or rear turn signal lights has not burnedout. Right turnLeft turnMove and hold...

124 2-1. Driving procedures Parking brake NOTICE ■ Before driving Fully release the parking brake.Driving the vehicle with the parking brake set will lead to brake componentsoverheating, which may affect braking performance and increase brakewear. Sets the parking brake Fully set the parking brake w...

125 2-1. Driving procedures 2 When drivin g Horn ■ After adjusting the steering wheel Make sure that the steering wheel is securely locked.The horn may not sound if the steering wheel is not securely locked. ( → P. 51) To sound the horn, press on orclose to the mark.

126 2-2. Instrument cluster Gauges and meters The following gauges, meters and displays illuminate when theengine switch is in the “ON” position. Tachometer Displays the engine speed in revolutions per minute. Speedometer Displays the vehicle speed. Fuel gauge Displays the quantity of fuel remaining...

127 2-2. Instrument cluster 2 When drivin g Engine coolant temperature gauge Displays the engine coolant temperature. Automatic transmission shift position indicator lights (ifequipped) → P. 116 Odometer and trip meter Odometer: Displays the total distance the vehicle has been driven. Trip meter: Di...

128 2-2. Instrument cluster Instrument panel light control The brightness of the instrument panel lights can be adjusted. DarkerBrighter When the headlight switch isturned on, the brightness will bereduced slightly unless the con-trol button is turned fully clock-wise. ■ Display In the following sit...

129 2-2. Instrument cluster 2 When drivin g Indicators and warning lights The indicator and warning lights on the instrument cluster and cen-ter panel inform the driver of the status of the vehicle’s various sys-tems. Instrument cluster Center panel

130 2-2. Instrument cluster ■ Indicators The indicators inform the driver of the operating state of thevehicle’s various systems. Turn signal indicator ( → P. 123) (U.S.A.) Headlight indicator( → P. 132) Headlight high beam indicator ( → P. 133) (Canada) Tail light indicator( → P. 132) (if equipped)...

131 2-2. Instrument cluster 2 When drivin g CAUTION ■ If a safety system warning light does not come on Should a safety system light such as the ABS or the SRS airbag warninglight not come on when you start the engine, this could mean that these sys-tems are not available to help protect you in an a...

132 2-3. Operating the lights and wipers Headlight switch The headlights can be operated manually. The side marker,parking, tail, licenseplate and instrumentpanel lights turn on. The headlights andall lights listed aboveturn on. U.S.A. Canada

133 2-3. Operating the lights and wipers 2 When drivin g Turning on the high beam headlights With the headlights on, pushthe lever forward to turn on thehigh beams. Pull the lever back to the centerposition to turn the high beamsoff. Pull the lever toward you toturn on the high beams. Release the le...

134 2-3. Operating the lights and wipers ■ Light reminder buzzer A buzzer sounds when the engine switch is turned OFF and the driver's dooris opened with the key removed from the engine switch while the lights areturned on. NOTICE ■ To prevent battery discharge Do not leave the lights on longer than...

135 2-3. Operating the lights and wipers 2 When drivin g Fog light switch ∗ The fog lights improve visibility in difficult driving conditions, suchas in rain or fog. They can be turned on only when the headlights areon low beam. OffFront fog lights on ∗ : If equipped

136 2-3. Operating the lights and wipers Windshield wipers and washer Wiper can be operated manually. Intermittent windshieldwiper operationLow speed windshield wiperoperationHigh speed windshieldwiper operationTemporary operation Increases the intermittentwindshield wiper frequencyDecreases the int...

137 2-3. Operating the lights and wipers 2 When drivin g ■ The windshield wipers and washers can be operated when The engine switch is in the “ON” position. ■ If no windshield washer fluid sprays Check that the washer nozzles are not blocked and if there is washer fluid inthe windshield washer fluid...

138 2-3. Operating the lights and wipers Rear window wiper and washer ∗ ■ The rear window wiper and washer can be operated when The engine switch is in “ON”. NOTICE ■ When the rear window is dry Do not use the wipers, as they may damage the rear window. ■ When there is no washer fluid spray from the...

139 2 When drivin g 2-4. Using other driving systems Cruise control ∗ Use cruise control to maintain a set speed without using the acceler-ator. IndicatorCruise control switch ■ Setting the vehicle speed Press the “ON-OFF” button toactivate the cruise control. Press the button once more todeactivate...

140 2-4. Using other driving systems ■ Cruise control can be set when ● Automatic transmission:The shift lever is in D or “3” (standard type), or in D, “4” or “5” range of S(multi-mode type). ● Vehicle speed is above 25 mph (40 km/h). ■ Adjusting the speed setting Increase speedDecrease speed Hold t...

141 2-4. Using other driving systems 2 When drivin g ■ Accelerating The vehicle can be accelerated normally. After acceleration, the set speedresumes. ■ Automatic cruise control cancellation The set speed is automatically canceled in any of the following situations. ● Actual vehicle speed falls more...

142 2-4. Using other driving systems Driving assist systems To help enhance driving safety and performance, the following sys-tems operate automatically in response to various driving situations.Be aware, however, that these systems are supplementary andshould not be relied upon too heavily when ope...

144 2-4. Using other driving systems ■ Turning off TRAC and VSC Push and hold the button whilethe vehicle is stopped to turn offTRAC and VSC. The slip indicator light and “VSCOFF” indicator light should comeon. Push the button again to turn thesystem back on. ■ Automatic reactivation of TRAC and VSC...

145 2-4. Using other driving systems 2 When drivin g ■ EPS operation sound When the steering wheel operates, a motor sound (whirring sound) may beheard. This does not indicate a malfunction. ■ Reduced effectiveness of EPS The effectiveness of EPS is reduced to prevent the system from overheatingwhen...

146 2-4. Using other driving systems CAUTION ■ When VSC is activated The slip indicator light flashes and a warning buzzer sounds. Always drivecarefully. Reckless driving may cause an accident. Exercise particular carewhen the indicator light flashes and a buzzer sounds. ■ When TRAC and VSC are off ...

147 2 When drivin g 2-5. Driving information Cargo and luggage Capacity and distribution Cargo capacity depends on the total weight of the occupants. (Cargo capacity) = (Total load capacity) - (Total weight of occupants) Steps for Determining Correct Load Limit ⎯ (1) Locate the statement “The combin...

148 2-5. Driving information (6) If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine howthis reduces the available cargo and luggage load capacity ofyour vehicle. ( → P. 155) Example on your vehicle Cargo capacityTota...

149 2-5. Driving information 2 When drivin g CAUTION ■ Storage precautions Observe the following precautions. Failing to do so may result in death or serious injury. ● To prevent cargo and luggage from sliding forward during braking, donot stack anything in the luggage compartment. Keep cargo and lu...

150 2-5. Driving information Vehicle load limits ■ Total load capacity and seating capacity These details are also described on the tire and loading informationlabel. ( → P. 317) CAUTION ■ Overloading the vehicle Do not overload the vehicle.It may not only cause damage to the tires, but also degrade...

151 2-5. Driving information 2 When drivin g Winter driving tips Carry out the necessary preparations and inspections before drivingthe vehicle in winter. Always drive the vehicle in a manner appropri-ate to the prevailing weather conditions. ■ Pre-winter preparations ● Use fluids that are appropria...

152 2-5. Driving information Selecting tire chains Snow chains can be mounted on 16- and 17-inch tires. They cannotbe mounted on 18-inch tires. Use the correct snow chain size whenmounting the snow chains. Chain size is regulated for each tire size. Side chain: 0.12 in. (3 mm) in diameter 0.39 in. (...

153 2-5. Driving information 2 When drivin g ■ Snow chain installation (vehicles with 16-inch and 17-inch tires) Observe the following precautions when installing and removing chains. ● Install and remove tire chains in a safe location. ● Install tire chains on the front tires only. Do not install t...

154 2-5. Driving information NOTICE ■ Repairing or replacing snow tires Request repairs of and obtain replacement snow tires from Toyota dealers orlegitimate tire retailers.This is because the removal and attachment of snow tires affects the opera-tion of the tire pressure warning valves and transmi...

155 2-5. Driving information 2 When drivin g Trailer towing Your vehicle is designed primarily as a passenger-carrying vehicle.Towing a trailer will have an adverse effect on handling, perfor-mance, braking, durability, and fuel consumption. For your safetyand the safety of others, do not overload t...

157 2-5. Driving information 2 When drivin g ■ Before towing ● Ensure that your vehicle’s tires are properly inflated. ( → P. 317) ● Trailer tires should be inflated according to the trailer manufacturer's rec-ommendation. ● All trailer lights must work in order to be legal. ● Confirm all lights wor...

158 2-5. Driving information CAUTION ■ To avoid accident or injury ● Do not exceed the trailer hitch assembly weight, gross vehicle weight,gross axle weight and trailer tongue load capacities. ● Never load more weight in the back than in the front of the trailer. About60% of the load should be in th...

159 2-5. Driving information 2 When drivin g Trailer towing tips Your vehicle will handle differently when towing a trailer. The 3 maincauses of vehicle-trailer accidents are driver error, excessive speedand improper trailer loading. Keep the following in mind when towing. ● Before starting out, che...

160 2-5. Driving information ● Reversing with a trailer attached is difficult and requires practice.Grip the bottom of the steering wheel and move your hand to theleft to move the trailer to the left. Move your hand to the right tomove the trailer to right. (This is generally opposite to reversingwi...

161 2-5. Driving information 2 When drivin g ● In order to maintain efficient engine braking and electrical chargingperformance, do not use “D” (automatic transmission) or the 5thgear (manual transmission). ● Due to the added load of the trailer, your vehicle's engine mayoverheat on hot days (at tem...

162 2-5. Driving information CAUTION ■ To avoid an accident ● Do not exceed 45 mph (72 km/h) or posted towing speed limit, whicheveris lower. As instability (swaying) of the towing vehicle-trailer combinationincreases as speed increases, exceeding 45 mph (72 km/h) may causeloss of control. ● Slow do...

163 2-5. Driving information 2 When drivin g Dinghy towing (automatic transmission) NOTICE ■ To avoid serious damage to your vehicle Do not tow your vehicle with four wheels on the ground. Your vehicle is not designed to be dinghy towed (with 4 wheels onthe ground) behind a motor home.

164 2-5. Driving information Dinghy towing (manual transmission) Towing your vehicle with 4 wheels on the ground To prevent damage to your vehicle, perform the following proceduresbefore towing. Shift the shift lever to N. Switch to the “ACC” position. ( → P. 112) Ensure that the audio system and ot...

165 2-5. Driving information 2 When drivin g NOTICE ■ Dinghy towing direction ■ To prevent the steering from locking Ensure the engine switch is in the “ACC” position. Do not tow the vehicle backwards. Doing so may cause serious damage.

168 3-1. Using the air conditioning system and defogger Air conditioning system Heater Air conditioning system Fan speed control dial Air outlet selection dial Air intake mode switch Temperature control dial Air conditioning ON/OFF switch Fan speed control dial Air outlet selection dial Air intake m...

169 3-1. Using the air conditioning system and defogger 3 Interior fe atures Adjusting the settings ■ Adjusting the temperature setting (heater) Turn the temperature control dial clockwise to increase the temper-ature. ■ Adjusting the temperature setting (air conditioning system) Turn the temperatur...

170 3-1. Using the air conditioning system and defogger Air flows to the upper body andfeet. : Some models Mainly air flows to the feet. : Some models Air flows to the feet and thewindshield defogger operates. The air intake is automaticallyswitched to outside air mode. It isnot possible to return t...

171 3-1. Using the air conditioning system and defogger 3 Interior fe atures Air flows to the windshield andside windows. The air intake is automaticallyswitched to outside air mode. It isnot possible to return to recircu-lated air mode when the switch ison. ■ Switching air intake modes Press . The ...

172 3-1. Using the air conditioning system and defogger Adjusting the position of and opening and closing the air outlets Adjusting the position Direct air flow to the left or right,up or down. Opening and closing Open the ventClose the vent ■ For quick cooling (vehicles with air conditioning system...

173 3-1. Using the air conditioning system and defogger 3 Interior fe atures ■ Using the recirculated air mode The windows will fog up more easily if the recirculated air mode is used for anextended period. ■ When outside air temperature approaches 32°F (0°C) (vehicles with airconditioning system) T...

174 3-1. Using the air conditioning system and defogger Rear window and outside rear view mirror defoggers ■ Outside rear view mirror defogger (if equipped) Turning the rear window defogger on will turn the outside rear view mirrordefoggers on. CAUTION ■ Outside rear view mirror defogger (if equippe...

175 3 Interior fe atures 3-2. Using the audio system Audio system types With navigation system Owners of models equipped with a navigation system should referto the “Navigation System Owner's Manual”. Without navigation system Type A: CD player with changer controller and AM/FM radio Type B: CD play...

176 3-2. Using the audio system ■ Using cellular phones Interference may be heard through the audio system's speakers if a cellularphone is being used inside or close to the vehicle while the audio system isoperating. CAUTION ■ For vehicles sold in U.S.A. and Canada ● Part 15 of the FCC Rules FCC Wa...

177 3-2. Using the audio system 3 Interior fe atures NOTICE ■ To prevent battery discharge Do not leave the audio system on longer than necessary with the engine off. ■ To avoid damaging the audio system Take care not to spill drinks or other fluids over the audio system.

178 3-2. Using the audio system Using the radio Setting station presets (excluding XM ® Satellite Radio) Search for desired stations by turning or pressing “ ∧ ” or “ ∨ ” on . Press and hold the button (from to ) the station is to be set to until you hear a beep. Scanning radio stations (excluding X...

180 3-2. Using the audio system ■ Scanning XM ® Satellite Radio channels ● Scanning channels in the current category Press .When the desired channel is reached, press again. ● Scanning preset channels Press and hold until you hear a beep. When the desired channel is reached, press again. ■ Displayin...

181 3-2. Using the audio system 3 Interior fe atures ■ When the battery is disconnected Station presets are erased. ■ Reception sensitivity ● Cargo loaded on the roof luggage carrier, especially metal objects, mayadversely affect the reception of XM ® Satellite Radio. ● Maintaining perfect radio rec...

183 3-2. Using the audio system 3 Interior fe atures Contact the XM ® Listener Care Center at 1-800-967-2346 (U.S.A.) or 1-877- 438-9677 (Canada). ■ Certifications for the radio tuner This equipment has been tested and found to comply with the limits for aclass B digital device, pursuant to Part 15 ...

184 3-2. Using the audio system Using the CD player Loading CDs ■ Loading a CD Type AInsert a CD. Type B Press .Insert a CD when the indicator on the slot turns from amber togreen. Volume Random playback Repeat play Playback Power CD eject Displaying text messages Selectinga track CD load (type B on...

185 3-2. Using the audio system 3 Interior fe atures ■ Loading multiple CDs (type B) Press and hold until you hear a beep. Insert a CD when the indicator on the slot turns from amber togreen. The indicator on the slot turns to amber when the CD is inserted. Insert the next CD when the indicator on t...

187 3-2. Using the audio system 3 Interior fe atures Random playback ■ Current CD Press (RAND). Tracks are played in a random order until is pressed once more. ■ All CDs (type A with a CD changer and type B) Press and hold (RAND) until you hear a beep. Tracks on all loaded CDs are played in a random...

189 3-2. Using the audio system 3 Interior fe atures NOTICE ■ CDs that cannot be used Do not use the following types of CDs or Dual Discs.Doing so may damage the CD player and/or the CD insert/eject function. ● Type A: CDs that have a diameter otherthan 4.7 in. (12 cm) or 3 in. (8 cm) ● Type B: CDs ...

190 3-2. Using the audio system NOTICE ■ CD player precautions Failure to follow the precautions below may result in serious damage to theCDs or the player itself. ● Do not insert anything other than CDs into the CD slot. ● Do not apply oil to the CD player. ● Store CDs away from direct sunlight. ● ...

191 3-2. Using the audio system 3 Interior fe atures Playing MP3 and WMA discs Loading and ejecting MP3 and WMA discs → P. 184 Selecting a CD (type A with a CD changer and type B) → P. 186 Volume Random playback Selecting a file Playback Power CD eject Displaying textmessages Selectinga file Selecti...

193 3-2. Using the audio system 3 Interior fe atures Repeat play ■ To repeat a file Press (RPT). ■ To repeat all of the files in a folder Press and hold (RPT) until you hear a beep. Random playback ■ To play files from a particular folder in random order Press (RAND). ■ To play all of the files on a...

195 3-2. Using the audio system 3 Interior fe atures ■ MP3 and WMA files MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by usingMP3 compression. WMA (Windows Media TM Audio) is a Microsoft audio compression format....

198 3-2. Using the audio system NOTICE ■ CDs that cannot be used ( → P. 189) ■ CD player precautions ( → P. 190)

199 3-2. Using the audio system 3 Interior fe atures Optimal use of the audio system Using the AUDIO CONTROL function ■ Changing sound quality modes Pressing selects the mode to be changed in the following order. “BAS” → “MID”* → “TRE” → “FAD” → “BAL” → “ASL” *: JBL brand audio system Displays the c...

201 3-2. Using the audio system 3 Interior fe atures JBL brand audio system When “ASL” is selected, turning to the right turns “ASL” on, and turning to the left turns “ASL” off. ASL automatically adjusts the volume and tone quality according to vehi-cle speed. ■ Trademark owned by SRS Labs, Inc. (ex...

202 3-2. Using the audio system Using the AUX adapter ■ Operating portable audio devices connected to the audio system The volume can be adjusted using the vehicle's audio controls. All otheradjustments must be made on the portable audio device itself. ■ When using a portable audio device connected ...

203 3-2. Using the audio system 3 Interior fe atures Using the steering wheel audio switches ∗ Turning on the power Press when the audio system is turned off. The audio system can be turned off by holding down until you hear a beep. Some audio features can be controlled using the switches on thestee...

205 3-2. Using the audio system 3 Interior fe atures Selecting a track/file Press to select the CD mode. Press to select the desired track/file. Selecting a folder (type A) Press to select the CD mode. Press and hold until you hear a beep. Selecting a disc (type A with a CD changer and type B) Press...

207 3-3. Using the hands-free phone system (for cellular phone) 3 Interior fe atures ■ Trademark owned by Bluetooth SIG. Inc. ■ Certification for the hands-free phone system FCC ID: ACJ932C5ZZZ035 IC ID: 216J-C5ZZZ035 MADE IN JAPAN NOTE:This device complies with Part 15 of the FCC Rules and RSS-210 ...

208 3-3. Using the hands-free phone system (for cellular phone) FCC WARNING:Changes or modifications in construction not expressly approved by theparty responsible for compliance could void the user's authority to operatethe equipment. CAUTION: Radio Frequency Radiation Exposure This equipment compl...

209 3-3. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Using the hands-free phone system ∗ (for cellular phone) ■ Audio unit Displays such items asmessage, name, and phonenumber Lower-case charactersand special characters,such as an umlaut, can-not be displayed. Selects...

210 3-3. Using the hands-free phone system (for cellular phone) ■ Steering wheel Volume The voice guidance volumecannot be adjusted by usingthis button. Hands-free phone systemon/starts a call (off-hookswitch)Hands-free phone systemoff/ends a call/refuses a call(on-hook switch)Press: Voice command s...

211 3-3. Using the hands-free phone system (for cellular phone) 3 Interior fe atures ■ Microphone Vehicles with moon roof Vehicles without moon roof

212 3-3. Using the hands-free phone system (for cellular phone) Operating the system by using a voice command By following voice guidance instructions output from the speaker,voice commands can be given to allow for operation of the hands- free phone system without checking the display or operating ...

213 3-3. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Using the hands-free phone system for the first time Before using the hands-free phone system, it is necessary to registera cellular phone in the system. The phone registration mode will beentered automatically when...

216 3-3. Using the hands-free phone system (for cellular phone) ■ Using a short cut key First menu Second menu Operation detail Dial “XXX (name)” - Dialing a number registered in the phone book Phone book add entry - Adding a new number Phone book change name - Changing the name of a phone number in...

217 3-3. Using the hands-free phone system (for cellular phone) 3 Interior fe atures ■ Automatic adjustment of volume When vehicle speed is 50 mph (80 km/h) or more, the volume automaticallyincreases. The volume returns to the previous volume setting when vehiclespeed drops to 43 mph (70 km/h) or le...

218 3-3. Using the hands-free phone system (for cellular phone) Making a phone call Dialing by inputting a number Press the talk switch and say “Dial by number”.Press the talk switch and say the phone number.Dial by one of the following methods:a. Press the off-hook switch.b. Press the talk switch a...

219 3-3. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Dialing by inputting a name Press the talk switch and say “Dial by name”.Select a registered name to be input by either of the followingmethods:a. Press the talk switch and say a registered name.b. Press the talk sw...

221 3-3. Using the hands-free phone system (for cellular phone) 3 Interior fe atures The following operations can be performed: Dialing: Press the off-hook switch or select “Dial” by using a voice command or . Storing the number in the phone book: Select “Store” by using a voice command or . Deletin...

222 3-3. Using the hands-free phone system (for cellular phone) Setting a cellular phone Registering a cellular phone Select “Pair Phone” by using a voice command or , and do the procedure for registering a cellular phone. ( → P. 213) Registering a cellular phone in the hands-free phone system allow...

223 3-3. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Selecting the cellular phone to be used Select “Select Phone” by using a voice command or . Pattern A Select the cellular phone to be used by either of the followingmethods, and select “Confirm” by using a voice com...

224 3-3. Using the hands-free phone system (for cellular phone) Press the talk switch or select “Record Name” by using , and say a new name. Select “Confirm” by using a voice command or . Listing the registered cellular phones Selecting “List Phones” by using a voice command or causes the list of re...

225 3-3. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Deleting a cellular phone Select “Delete” by using a voice command or . Pattern A Select the cellular phone to be deleted by either of the follow-ing methods and select “Confirm” by using a voice command or : a. Pre...

226 3-3. Using the hands-free phone system (for cellular phone) Changing the passkey Select “Set Passkey” by using a voice command or . Pattern A Press the talk switch, say a 4 to 8-digit number, and select “Confirm” by using a voice command or . Pattern B Select a 4 to 8-digit number by using . The...

227 3-3. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Security and system setup Setting or changing the PIN ■ Setting a PIN Select “Set PIN” by using a voice command or . Enter a PIN by using a voice command or . When using , input the code 1 digit at a time. To enter ...

228 3-3. Using the hands-free phone system (for cellular phone) ■ Changing the PIN Select “Set PIN” by using a voice command or . Enter the registered PIN by using a voice command or . Enter a new PIN by using a voice command or . When using , input the code 1 digit at a time. Locking or unlocking t...

229 3-3. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Setting voice guidance volume Select “Guidance Vol” by using . Change the voice guidance volume. To decrease the volume: Turn counterclockwise. To increase the volume: Turn clockwise. Initialization Select “Initiali...

231 3-3. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Using the phone book Adding a new phone number The following methods can be used to add a new phone number: ● Inputting a phone number by using a voice command ● Transferring data from the cellular phone ● Inputting...

232 3-3. Using the hands-free phone system (for cellular phone) ■ Adding procedure Select “Add Entry” by using a voice command or . Use one of the following methods to input a telephone num-ber: Inputting a telephone number by using a voice command STEP2-1 Select “By Voice” by using a voice command ...

234 3-3. Using the hands-free phone system (for cellular phone) Select the name to be registered by either of the followingmethods, and select “Confirm” by using a voice command or : a. Press the talk switch and say the desired name. b. Select “Record Name” by using , and say the desired name. Selec...

235 3-3. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Select the desired preset button, and register the data intospeed dial by either of the following methods:a. Press the desired preset button, and select “Confirm” by using a voice command or . b. Press and hold the ...

237 3-3. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Listing the registered data Selecting “List names” by using a voice command causes a list of theregistered data to be read aloud. When listing is complete, the system returns to “Phonebook”.Pressing the talk switch ...

238 3-4. Using the interior lights Interior lights list Personal/interior lights or personal lights ( → P. 240, 241) Interior lights ( → P. 239)

239 3-4. Using the interior lights 3 Interior fe atures Interior light “DOOR” positionOffOn ■ Illuminated entry system Vehicles with moon roof When the light switch is in the “DOOR” position, the interior lights and per-sonal/interior lights automatically turn on/off according to the engine switchpo...

240 3-4. Using the interior lights Personal/interior lights (vehicles with moon roof) ■ Interior lights “DOOR” positionOffOn ■ Personal lights On/off Personal/interior lights

241 3-4. Using the interior lights 3 Interior fe atures Personal lights (vehicles without moon roof) On/off Personal lights

242 3-5. Using the storage features List of storage features Auxiliary boxesGlove boxBottle holdersCup holdersConsole box

243 3-5. Using the storage features 3 Interior fe atures Glove box Pull up the lever. Console box Type A Lift the lid while pulling the lever. CAUTION ■ Caution while driving Keep the glove box closed.Injuries may result in the event of an accident or sudden braking. Glove box and console box

244 3-5. Using the storage features Type B (upper) Lift the lid while pulling the lever. Type B (lower) Lift the lid and tray while pullingthe lever. CAUTION ■ Caution while driving Keep the console box closed.Injuries may result in the event of an accident or sudden braking. Console box

245 3-5. Using the storage features 3 Interior fe atures Cup holders Front Rear Pull the lid to open. ■ Using the cup holder (front) to store small items Remove the holders. Cup holders

246 3-5. Using the storage features ■ Adjusting the cup holder to the size of the cups or drink-cans CAUTION ■ Items unsuitable for the cup holder Do not place anything other than cups or aluminum cans in the cup holders.Other items may be thrown out of the holders in the event of an accident orsudd...

247 3-5. Using the storage features 3 Interior fe atures Bottle holders Front Rear CAUTION ■ Items unsuitable for the bottle holder Do not place anything other than pet bottles in the bottle holders.Other items may be thrown out of the holders in the event of an accident orsudden braking and cause i...

248 3-5. Using the storage features Auxiliary boxes Front Pull up the lever. Overhead console (vehicles with moon roof) Push the lid. NOTICE ■ When a pet bottle is in the front bottle holder (vehicles with manualwindow) As there is a possibility of interfering witha manual window regulator handle, p...

250 3-6. Other interior features Sun visors Forward position: Flip down.Side position: Flip down, unhook, andswing to the side.

251 3-6. Other interior features 3 Interior fe atures Vanity mirrors Slide the cover.

252 3-6. Other interior features Clock ■ The clock is displayed when The engine switch is in the “ACC” or “ON” position. Adjusts the hour.Adjusts the minutes.Rounds to the nearesthour.* *: e.g. 1:00 to 1:29 → 1:00 1:30 to 1:59 → 2:00

253 3-6. Other interior features 3 Interior fe atures Ashtrays ∗ CAUTION ■ When not in use Keep the ashtray closed.Injuries may result in the event of an sudden braking, sudden swerving or anaccident. ■ To prevent fire ● Fully extinguish matches and cigarettes before putting them in the ashtray,then...

254 3-6. Other interior features Cigarette lighter ∗ ■ The cigarette lighter can be used when The engine switch is in the “ACC” or “ON” position. CAUTION ■ To avoid burns or fires ● Do not touch the metal parts of the cigarette lighter. ● Do not hold the cigarette lighter down. It could overheat and...

255 3-6. Other interior features 3 Interior fe atures Power outlet ∗ ■ The power outlet can be used when 12 V The engine switch is in the “ACC” or “ON” position. 115 V The engine switch is in the “ON” position. The power outlet can be used for a following component. 12 V: Accessories that run on les...

256 3-6. Other interior features NOTICE ■ To avoid damaging the power outlet Close the power outlet lid when the power outlet is not in use.Foreign objects or liquids that enter the power outlet may cause a short cir-cuit. ■ To prevent the fuse from being blown 12 V Do not use an accessory that uses...

257 3-6. Other interior features 3 Interior fe atures Grocery bag hook This hook is designed to hang things like grocery bag. Cabin Press the hook. Luggage compartment

258 3-6. Other interior features NOTICE ■ Grocery bag hook weight capacity Cabin Do not hang any object heavier than 44 lb. (20 kg) on the grocery bag hook. Luggage compartment Do not hang any object heavier than 7 lb. (3 kg) on the grocery bag hooks.

259 3-6. Other interior features 3 Interior fe atures Seatback table ∗ CAUTION ■ Caution while driving Observe the following precautions to avoid death or serious injury. ● Do not set up the seatback table. ● Do not sit on or place anything on the seatback table. NOTICE ■ To prevent damage to the se...

260 3-6. Other interior features Floor mat CAUTION ■ When inserting the floor mat Observe the following precautions.Failure to do so may result in the floor mat slipping and interfering with themovement of the pedals during driving, resulting in an accident. ● Make sure the floor mat is properly pla...

261 3-6. Other interior features 3 Interior fe atures Luggage compartment feature ■ Cargo hooks Cargo hooks are provided forsecuring loose items. ■ Tie-down belts To tightenTo loosenTo hookTo unhook

263 3-6. Other interior features 3 Interior fe atures ■ Grocery bag hooks ( → P. 257) ■ Tonneau cover (if equipped) Remove the deck board. Take out the bag. Remove the tonneau coverfrom the bag. STEP 1 STEP 2 STEP 3

265 3-6. Other interior features 3 Interior fe atures Folding the tonneau cover Hold the tonneau cover with bothhands. Point your thumbs inopposite directions. Bend one side of the covertowards you. Twist the other side in the oppo-site direction, as shown in theillustration. STEP 1 STEP 2 STEP 3

267 3-6. Other interior features 3 Interior fe atures CAUTION ■ When unfolding the tonneau cover Be careful not to hit yourself when unfolding the tonneau cover. ■ Caution while driving Keep the deck boards locked.Injuries may result in the event of an accident or sudden braking.

268 3-6. Other interior features Compass ∗ The compass on the inside rear view mirror indicates the direction inwhich the vehicle is heading. ■ Operation To turn the compass on or off,press and hold “AUTO” for 3seconds. ■ Displays and directions Display Direction N North NE Northeast E East SE South...

269 3-6. Other interior features 3 Interior fe atures Calibrating the compass The direction display deviates from the true direction determined bythe earth’s magnetic field. The amount of deviation varies accordingto the geographic position of the vehicle. If you cross over a map boundary shown in t...

270 3-6. Other interior features ■ Circling calibration Stop the vehicle in a place where it is safe to drive in a circle. Press and hold “AUTO” for 9seconds. C appears on the compass dis-play. Drive the vehicle at 5 mph (8 km/h) or less in a circle until adirection is displayed. If there is not eno...

271 3-6. Other interior features 3 Interior fe atures CAUTION ■ While driving the vehicle Do not adjust the display. Be sure to adjust the display only when the vehicleis stopped. ■ When doing the circling calibration Be sure to secure a wide space, and watch out for people and vehicles in theneighb...

274 4-1. Maintenance and care Cleaning and protecting the vehicle exterior ■ Automatic car washes ● Before washing the vehicle, do the following. • Fold the mirrors back.• Remove the antenna. ● Brushes used in automatic car washes may scratch the vehicle surfaceand harm your vehicle's paint. ■ High ...

275 4-1. Maintenance and care 4 Mainten ance an d ca re ■ To prevent deterioration and body corrosion ● Wash the vehicle immediately in the following cases: • After driving near the sea coast• After driving on salted roads• If you see coal tar or tree sap on the paint surface• If you see dead insect...

276 4-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle's interior andkeep it in top condition: ■ Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty sur-faces with a cloth dampened with lu...

277 4-1. Maintenance and care 4 Mainten ance an d ca re ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a yearto maintain the quality of the vehicle's interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use...

278 4-1. Maintenance and care NOTICE ■ Cleaning detergents Do not use organic substances such as benzene or gasoline, acidic or alka-line solutions, dye, bleach or other detergent. Doing so may discolor thevehicle interior or cause streaks or damage to painted surfaces. ■ Preventing damage to leathe...

279 4 Mainten ance an d ca re 4-2. Maintenance Maintenance requirements ■ Repair and replacement It is recommended that genuine Toyota parts be used for repair to ensureperformance of each system. If non-Toyota parts are used in replacement orif a repair shop other than a Toyota dealer performs repa...

280 4-2. Maintenance ■ Allow inspection and repairs to be performed by a Toyota dealer ● Toyota technicians are well-trained specialists and are kept up to datewith the latest service information. They are well informed about theoperations of all systems on your vehicle. ● Keep a copy of the repair ...

281 4-2. Maintenance 4 Mainten ance an d ca re General maintenance Engine compartment Items Check points Battery Check the connections. ( → P. 304) Brake fluid At the correct level? ( → P. 302) Engine coolant At the correct level? ( → P. 300) Engine oil At the correct level? ( → P. 296) Exhaust syst...

282 4-2. Maintenance Vehicle interior Items Check points Accelerator pedal • Moves smoothly (without uneven pedal effort or catching)? Automatic transmission “Park” mechanism • Can the vehicle be held securely on an incline with the shift lever in P? Brake pedal • Moves smoothly?• Does it have appro...

283 4-2. Maintenance 4 Mainten ance an d ca re Vehicle exterior Items Check points Doors • Operate smoothly? Engine hood • The lock system works properly? Fluid leaks • Is there any leakage after park- ing? Tires • Inflation pressure is correct?• Tire surfaces not worn or dam- aged? • Tires rotated ...

284 4-2. Maintenance Emission inspection and maintenance (I/M) programs Some states have vehicle emission inspection programs whichinclude OBD (On Board Diagnostics) checks. The OBD system moni-tors the operation of the emission control system. ■ If the malfunction indicator lamp comes on The OBD sy...

286 4-3. Do-it-yourself maintenance Items Parts and tools Fuses ( → P. 328) • Fuse with same amperage rating as original Radiator and condenser ( → P. 301) ⎯ Tire inflation pressure ( → P. 317) • Tire pressure gauge• Compressed air source Washer fluid ( → P. 306) • Water washer fluid containing anti...

287 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION The engine compartment contains many mechanisms and fluids that maymove suddenly, become hot, or become electrically energized. To avoid deathor serious injury observe the following precautions. ■ When working on the engine compar...

288 4-3. Do-it-yourself maintenance NOTICE ■ If you remove the air cleaner Driving with the air cleaner removed may cause excessive engine wear dueto dirt in the air. Also, a backfire could cause a fire in the engine compart-ment.

289 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood release lever. The hood will pop up slightly. Lift the auxiliary catch leverand lift the hood. Hold the hood open by insert-ing the supporting rod into t...

290 4-3. Do-it-yourself maintenance CAUTION ■ Pre-driving check Check that the hood is fully closed and locked.If the hood is not locked properly, it may open while the vehicle is in motionand cause an accident, which may result in death or serious injury. ■ After installing the support rod into the...

291 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Positioning a floor jack When raising your vehicle with a floor jack, position the jack cor-rectly. Improper placement may damage your vehicle or cause injury. ■ Front 1.8 L 4-cylinder (2ZR-FE) engine 2.4 L 4-cylinder (2AZ-FE) engine

292 4-3. Do-it-yourself maintenance ■ Rear 2WD models without 18-inch tires 2WD models with 18-inch tires AWD models

293 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION ■ When raising your vehicle Make sure to observe the following to reduce the possibility of death or seri-ous injury. ● Do not use the jack that was supplied with your vehicle. ● Do not put any part of your body or get underneath ...

297 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re 2.4 L 4-cylinder (2AZ-FE) engine LowFull ■ Adding engine oil If the oil level is below or nearthe low level mark, add engineoil of the same type as already inthe engine. Make sure to check the oil type and prepare the items needed beforea...

298 4-3. Do-it-yourself maintenance ■ Engine oil consumption ● The amount of engine oil consumed depends on the oil viscosity, thequality of the oil and the way the vehicle is driven. ● More oil is consumed under driving conditions such as high speeds andfrequent acceleration and deceleration. ● A n...

299 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re NOTICE ■ To prevent serious engine damage Check the oil level on a regular basis. ■ When replacing the engine oil ● Be careful not to spill engine oil on the vehicle components. ● Avoid overfilling, as the engine could be damaged. ● Check...

300 4-3. Do-it-yourself maintenance Engine coolant The coolant level is satisfactory if it is between the “FULL” and “LOW”lines on the reservoir when the engine is cold. Reservoir cap“FULL”“LOW” If the level is on or below the“LOW” line, add coolant up to the“FULL” line. ( → P. 391) ■ If the coolant...

301 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Radiator and condenser Check the radiator and condenser and remove any foreign objects. If any of the above parts are extremely dirty or you are not sure oftheir condition, have your vehicle checked by your Toyota dealer. NOTICE ■ When ad...

302 4-3. Do-it-yourself maintenance Brake fluid ■ Checking fluid level The brake fluid level should bebetween the “MAX” and “MIN”lines on the tank. Make sure to check the fluid type and prepare the necessary items. ■ Adding fluid Make sure to check the fluid type and prepare the necessary items. Dis...

303 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Remove the reservoir cap. Add brake fluid slowly while checking the fluid level. STEP 2 ■ Brake fluid can absorb moisture from the air Excess moisture in the fluid can cause a dangerous loss of braking effi-ciency. Use only newly opened b...

304 4-3. Do-it-yourself maintenance Battery Check the battery as follows. ■ Battery exterior Make sure that the battery terminals are not corroded and thatthere are no loose connections, cracks, or loose clamps. TerminalsHold-down clampGround cable ■ Checking battery fluid Check the battery conditio...

305 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION ■ Chemicals in the battery A battery contains poisonous and corrosive sulfuric acid and may producehydrogen gas which is flammable and explosive. To reduce the risk of deathor serious injury, take the following precautions while w...

306 4-3. Do-it-yourself maintenance Washer fluid For vehicles sold in U.S.A. If the washer fluid level is at“LOW” add washer fluid. For vehicles sold in Canada If any washer does not work or the low windshield washer fluid warn-ing light comes on, the washer tank may be empty. Add washer fluid. NOTI...

307 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re NOTICE ■ Do not use any fluid other than washer fluid Do not use soapy water or engine antifreeze instead of washer fluid. Doing so may cause streaking on the vehicle’s painted surfaces. ■ Diluting washer fluid Dilute washer fluid with wa...

308 4-3. Do-it-yourself maintenance Tires Replace or rotate tires in accordance with maintenance sched-ules and treadwear. ■ Checking tires New treadTreadwear indicatorWorn tread The location of treadwearindicators is shown by the“TWI” or “ ” marks, etc., molded on the sidewall ofeach tire. Check sp...

309 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Installing tire pressure warning valves and transmitters When replacing tires or wheels, tire pressure warning valves andtransmitters must also be installed. When new tire pressure warning valves and transmitters areinstalled, new tire pr...

310 4-3. Do-it-yourself maintenance ■ How to initialize the tire pressure warning system Park the vehicle in a safe place and turn the engine switchOFF. While the vehicle is moving, initialization is not performed. Adjust the tire inflation pressure to the specified cold tire infla-tion pressure lev...

311 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Registering ID codes The tire pressure warning valve and transmitter is equipped with aunique ID code. When replacing a tire pressure warning valve andtransmitter, it is necessary to register the ID code of tire pressurewarning valve and ...

313 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Tire types 1 Summer tires Summer tires are high-speed performance tires best suited to highwaydriving under dry conditions. Since summer tires do not have the sametraction performance as snow tires, summer tires are inadequate fordrivin...

314 4-3. Do-it-yourself maintenance ■ Tire pressure warning system certification FCC ID: PAXPMV107JFCC ID: HYQ13BCXIC ID: 3729A-PMV107JIC ID: 1551A-13BCX For vehicles sold in the U.S.A. This device complies with Part 15 of the FCC Rules. Operation is subjectto the following two conditions: (1) This ...

315 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION ■ When inspecting or replacing tires Observe the following precautions to prevent accidents. Failure to do somay cause damage to parts of the drive train, as well as dangerous han-dling characteristics, which may lead to an accide...

316 4-3. Do-it-yourself maintenance NOTICE ■ Repairing or replacing tires, wheels and tire pressure warningvalves and transmitters When removing or fitting the wheels, tires or the tire pressure warningvalves and transmitters, contact your Toyota dealer as the tire pressurewarning valves and transmi...

317 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Tire inflation pressure ■ Tire inflation pressure The recommended cold tire inflation pressure and tire size is dis-played on the tire and loading information label. ( → P. 407) Type A Type B

318 4-3. Do-it-yourself maintenance ■ Tire inflation pressure check interval You should check tire inflation pressure every two weeks, or at leastonce a month.Do not forget to check the spare. ■ Inspection and adjustment procedure Tire valveTire pressure gauge Remove the tire valve cap.Press the tip...

319 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Effects of incorrect tire inflation pressure Driving with incorrect tire inflation pressure may result in the following: ● Reduced fuel efficiency ● Reduced driving comfort and tire life ● Reduced safety ● Damage to the drive train If a...

320 4-3. Do-it-yourself maintenance CAUTION ■ Proper inflation is critical to save tire performance Keep your tires properly inflated. Otherwise, the following conditionsmay occur and result in an accident causing death or serious injury. ● Excessive wear ● Uneven wear ● Poor handling ● Possibility ...

321 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Wheels If a wheel is bent, cracked or heavily corroded, it should bereplaced.Otherwise, the tire may separate from the wheel or cause loss ofhandling control. ■ Wheel selection When replacing wheels, care should be taken to ensure thatthe...

322 4-3. Do-it-yourself maintenance ■ When replacing wheels The wheels of your Toyota, except for the compact spare tire, areequipped with tire pressure warning valves and transmitters that allowthe tire pressure warning system to provide advanced warning in theevent of a loss in tire inflation pres...

323 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Air conditioning filter The air conditioning filter must be changed regularly to maintain airconditioning efficiency. ■ Removal method Turn the engine switch OFF. Open the glove box. Slide offthe damper. Push in each side of the glovebox ...

324 4-3. Do-it-yourself maintenance ■ Checking interval Replace the air conditioning filter according to the maintenance schedule. Industy areas or areas with heavy traffic flow, early replacement may berequired. (For scheduled maintenance information, please refer to the“Scheduled Maintenance Guide...

325 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Key battery (vehicles with wireless remote control) Replace the battery with a new one if it is discharged. ■ You will need the following items: ● Flathead screwdriver (To prevent damage to the key, coverthe tip of the screwdriver with a ...

326 4-3. Do-it-yourself maintenance ■ If the key battery is discharged The following symptoms may occur. ● The wireless remote control will not function properly. ● The operational range is reduced. ■ Use CR2025 lithium battery ● Batteries can be purchased at your Toyota dealer, jewelers, or cameras...

327 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re NOTICE ■ For normal operation after replacing the battery Observe the following precautions to prevent accidents. ● Always work with dry hands.Moisture may cause the battery to rust. ● Do not touch or move any other components inside the ...

328 4-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may haveblown. If this happens, check and replace the fuses as necessary. Turn the engine switch OFF.Open the fuse box cover. Engine compartment Push the tab in and lift the li...

329 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Take out the pullout tool. Only type A fuse can beremoved using the pullout tool. For type A and B fuses: Remove the fuse.Check if the fuse has blown. Type A Normal fuseBlown fuse Replace it with one of anappropriate amperage rating.The a...

330 4-3. Do-it-yourself maintenance Type C Normal fuseBlown fuse Contact your Toyota dealer. Type D Normal fuseBlown fuse Contact your Toyota dealer.

331 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Fuse layout and amperage ratings ■ Engine compartment Fuse Ampere Circuit 1 CDS FAN 30 A Electric cooling fan(s) 2 RDI FAN 40 A Electric cooling fan(s) 3 ABS NO. 3 30 A Anti-lock brake system, vehicle sta-bility control system 4 ABS NO. 1...

334 4-3. Do-it-yourself maintenance ■ Under the driver’s side instrument panel Fuse Ampere Circuit 1 TAIL 10 A Parking lights, tail lights, license plate lights, multiport fuel injection system/sequential multiport fuel injection system, instrument cluster lights 2 PANEL 7.5 A Switch illumination 3 ...

336 4-3. Do-it-yourself maintenance ■ After a fuse is replaced ● If the lights do not turn on even after the fuse has been replaced, a bulbmay need replacing. ( → P. 337) ● If the replaced fuse blows again, have the vehicle inspected by yourToyota dealer. ■ If there is an overload in the circuits Th...

337 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Light bulbs You may replace the following bulbs yourself. The difficulty level ofreplacement varies depending on the bulb. If necessary bulbreplacement seems difficult to perform, contact your Toyota dealer. For more information about rep...

338 4-3. Do-it-yourself maintenance ■ Rear bulb locations Stop/tail and rearside marker lights Rear turn signal lights Back-up lights License plate lights

339 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Replacing light bulbs ■ Headlight low beams Turn the bulb base counterclock-wise. Unplug the bulb while depress-ing the lock release. ■ Headlight high beams Turn the bulb base counterclock-wise. STEP 1 STEP 2 STEP 1

340 4-3. Do-it-yourself maintenance Unplug the bulb while depress-ing the lock release. ■ Front fog lights (if equipped) Remove the fender liner boltsand clip. Partly remove the fender liner. Turn the bulb base counterclock-wise. STEP 2 STEP 1 STEP 2 STEP 3

341 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Unplug the bulb while depress-ing the lock release. ■ Front turn signal/parking and front side marker lights Turn the bulb base counterclock-wise. Remove the light bulb. STEP 4 STEP 1 STEP 2

342 4-3. Do-it-yourself maintenance ■ Stop/tail and rear side marker lights, rear turn signal lightsand back-up lights Open the back door. Left side Remove the cover. Right side (type A) Remove the cover using the flat-head screwdriver. To protect the cover, place a ragbetween the flathead screwdriv...

344 4-3. Do-it-yourself maintenance ■ License plate lights Open the back door and removethe cover. To protect the cover, place a ragbetween the flathead screwdriverand the cover, as shown in theillustration. Turn the bulb base counterclock-wise. Remove the light bulb. ■ LED high mounted stoplight Th...

345 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Condensation build-up on the inside of the lens Contact your Toyota dealer for more information in the following situations.Temporary condensation build-up on the inside of the headlight lens doesnot indicate a malfunction. ● Large drop...

348 5-1. Essential information Emergency flashers NOTICE ■ To prevent battery discharge Do not leave the emergency flashers on longer than necessary when theengine is not running. Use the emergency flashers if the vehicle malfunctions or isinvolved in an accident. Press the switch to flash allthe tu...

5 W hen tr oub le ar ises 349 5-1. Essential information If your vehicle needs to be towed Before towing The following may indicate a problem with your transmission. Contactyour Toyota dealer before towing. ● The engine is running, but the vehicle will not move. ● The vehicle makes an abnormal sound...

350 5-1. Essential information Emergency towing If a tow truck is not available, in an emergency your vehicle may betemporarily towed using a cable or chain secured to the emergencytowing eyelet. This should only be attempted on hard surfaced roadsfor short distances at low speeds.A driver must be i...

5 W hen tr oub le ar ises 351 5-1. Essential information ■ Emergency towing procedure Release the parking brake. Shift the shift lever to N. Turn the engine switch to the “ACC” (engine off) or “ON” (enginerunning) position. CAUTION ■ Caution while towing ● Use extreme caution when towing the vehicle...

352 5-1. Essential information Towing with a sling-type truck Towing with a wheel-lift type truck from the front 2WD models Release the parking brake. NOTICE ■ To prevent body damage Do not tow with a sling-type truck, either from the front or rear.

5 W hen tr oub le ar ises 353 5-1. Essential information AWD models Use a towing dolly under the rearwheels. Towing with a wheel-lift type truck from the rear Automatic transmission: Use atowing dolly under the frontwheels. Manual transmission: We recom-mend to use a towing dolly underthe front whee...

354 5-1. Essential information Using a flat bed truck If you use chains or cables to tiedown your vehicle, the anglesshaded in black must be 45 ° . Do not overly tighten the tiedowns or the vehicle may bedamaged. NOTICE ■ To prevent causing serious damage to the transmission (vehicles with an automa...

5 W hen tr oub le ar ises 355 5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probablyneeds adjustment or repair. Contact your Toyota dealer as soon aspossible. ■ Visible symptoms ● Fluid leaks under the vehicle(Water dripping from...

356 5-1. Essential information Fuel pump shut off system Follow the procedure below to restart the engine after the system isactivated. Turn the engine switch to the “ACC” or “LOCK” position.Restart the engine. NOTICE ■ Before starting the engine Inspect the ground under the vehicle.If you find that...

5 W hen tr oub le ar ises 357 5-1. Essential information Event data recorder In a crash or a near car crash event The SRS airbag sensor assembly contains the EDR. In a crash or anear car crash event, this device may record some or all of the follow-ing information: ● Engine speed ● Whether the brake...

358 5-1. Essential information Disclosure of the data Toyota will not disclose the data recorded in an EDR to a third partyexcept when: ● An agreement from the vehicle's owner (or the leasing company fora leased vehicle) is obtained ● Officially requested by the police or other authorities ● Used as...

360 5-2. Steps to take in an emergency Stop the vehicle immediately. The following warning indicates the possibility of damage to the vehi-cle that may lead to an accident. Immediately stop the vehicle in asafe place and contact your Toyota dealer. Have the vehicle inspected immediately. Failing to ...

5 W hen tr oub le ar ises 361 5-2. Steps to take in an emergency (U.S.A.) (Canada) ABS warning light Indicates a malfunction in:• ABS; or• The brake assist system (vehicles with VSC system). Electric power steering warning light Indicates a malfunction in the EPS (Electric Power Steering) system. (A...

362 5-2. Steps to take in an emergency Follow the correction procedures. After taking the specified steps to correct the suspected problem,check that the warning light turns off. Warning light Warning light/Details Correction procedure Open door warning light Indicates that a door is not fully close...

364 5-2. Steps to take in an emergency ■ Front passenger detection sensor and passenger seat belt reminder ● If luggage is placed on the front passenger seat, the front passengerdetection sensor may cause the warning light to flash, even if a passen-ger is not sitting in the seat. ● If a cushion is ...

5 W hen tr oub le ar ises 365 5-2. Steps to take in an emergency ■ When a tire is replaced with a spare tire The compact spare tire is not equipped with the tire pressure warningvalve and transmitter. If a tire goes flat, the tire pressure warning light willnot turn off even though the flat tire is ...

366 5-2. Steps to take in an emergency ■ If the tire pressure warning light comes on after blinking for 1minute frequently If the tire pressure warning light comes on after blinking for 1 minute fre-quently when the engine switch is turned to the “ON” position, have itchecked by your Toyota dealer. ...

5 W hen tr oub le ar ises 367 5-2. Steps to take in an emergency CAUTION ■ Maintenance of the tires Each tire, including the spare (if provided), should be checked monthlywhen cold and inflated to the inflation pressure recommended by thevehicle manufacturer on the vehicle placard or tire inflation ...

368 5-2. Steps to take in an emergency CAUTION Your vehicle has also been equipped with a TPMS (tire pressure warningsystem) malfunction indicator to indicate when the system is not operat-ing properly. The TPMS (tire pressure warning system) malfunction indi-cator is combined with the low tire pres...

5 W hen tr oub le ar ises 369 5-2. Steps to take in an emergency If you have a flat tire Remove the flat tire and replace it with the spare provided. ■ Before jacking up the vehicle ● Stop the vehicle on a hard, flat surface. ● Set the parking brake. ● Shift the shift lever to P (automatic transmiss...

370 5-2. Steps to take in an emergency Taking out the jack Turn the knobs to the “UNLOCK”position and remove the deckboard. Detach the hook. STEP 1 STEP 2

5 W hen tr oub le ar ises 371 5-2. Steps to take in an emergency Taking out the spare tire Turn the knobs to the “UNLOCK”position and remove the deckboards. Loosen the center fastener thatsecures the spare tire. STEP 1 STEP 2

372 5-2. Steps to take in an emergency Replacing a flat tire Chock the tires. Vehicles with a steel wheel,remove the wheel ornamentusing the wrench. To protect the wheel ornament,place a rag between the wrenchand the wheel ornament, asshown in the illustration. STEP 1 Flat tire Wheel chock posi- tio...

5 W hen tr oub le ar ises 375 5-2. Steps to take in an emergency Installing the tire Remove any dirt or foreign mat-ter from the wheel contact sur-face. If foreign matter is on the wheelcontact surface, the wheel nutsmay loosen while the vehicle isin motion, and the tire maycome off the vehicle. Ins...

376 5-2. Steps to take in an emergency Lower the vehicle. Firmly tighten each nut two orthree times in the order shown inthe illustration. Tightening torque: 76 ft•lbf (103 N•m, 10.5 kgf•m) Stow the flat tire, tire jack and all tools. Stowing the flat tire Vehicles with aluminum wheel:Before stowing...

378 5-2. Steps to take in an emergency Pull the ends of the belts tosecure the tire. STEP 6 ■ The compact spare tire ● The compact spare tire is identified by the label “TEMPORARY USEONLY” on the tire sidewall.Use the compact spare tire temporarily only in an emergency. ● Make sure to check the tire...

5 W hen tr oub le ar ises 379 5-2. Steps to take in an emergency CAUTION ■ Using the tire jack Improper use of the tire jack may lead to death or serious injuries due tothe vehicle suddenly falling off the jack. ● Do not use the tire jack for any purpose other than replacing tires orinstalling and r...

380 5-2. Steps to take in an emergency CAUTION ■ Replacing a flat tire Observe the following precautions to reduce the risk of death or seriousinjury: ● Never use oil or grease on the wheel bolts or wheel nuts.Oil and grease may cause the wheel nuts to be excessively tightened,leading to bolt or dis...

5 W hen tr oub le ar ises 381 5-2. Steps to take in an emergency CAUTION ■ When the spare tire is attached The vehicle speed may not be correctly detected, and the following sys-tems may not operate correctly: ● ABS & Brake assist ● VSC (if equipped) ● TRAC (if equipped) ● Navigation system (if ...

382 5-2. Steps to take in an emergency NOTICE ■ Do not drive the vehicle with a flat tire Do not continue driving with a flat tire.Driving even a short distance with a flat tire can damage the tire and thewheel beyond repair. ■ Be careful when driving over bumps with the compact spare tireinstalled ...

5 W hen tr oub le ar ises 383 5-2. Steps to take in an emergency If the engine will not start If the engine still does not start after following the correct startingprocedure ( → P. 112) or releasing the steering lock ( → P. 114), confirm the following points. ■ The engine will not start even when t...

5 W hen tr oub le ar ises 385 5-2. Steps to take in an emergency If you lose your keys New genuine keys can be made by your Toyota dealer. Bring a mas-ter key and the key number stamped on the key number plate.

386 5-2. Steps to take in an emergency If the battery is discharged The following procedures may be used to start the engine if the vehi-cle's battery is discharged.You can call your Toyota dealer or qualified repair shop. If you have a set of jumper (or booster) cables and a second vehi-cle with a ...

388 5-2. Steps to take in an emergency 2.4 L 4-cylinder (2AZ-FE) engine Connecting the jumper cables Positive (+) battery terminal on your vehiclePositive (+) battery terminal on the second vehicleNegative (-) battery terminal on the second vehicleConnect the jumper cable to ground on your vehicle a...

5 W hen tr oub le ar ises 389 5-2. Steps to take in an emergency ■ Avoiding a discharged battery ● Turn off the headlights and the audio system while the engine is turnedoff. ● Turn off any unnecessary electrical components when the vehicle is run-ning at a low speed for an extended period, such as ...

390 5-2. Steps to take in an emergency NOTICE ■ To prevent damage to the vehicle Do not pull- or push-start the vehicle, because the catalytic converter mayoverheat and become a fire hazard. ■ When handling jumper cables Be careful that the jumper cables do not become tangled in the cooling fansor a...

5 W hen tr oub le ar ises 391 5-2. Steps to take in an emergency If your vehicle overheats If your engine overheats: Stop the vehicle in a safe place and turn off the air condi-tioning system.Check to see if steam is coming out from under the hood.If you see steam: Stop the engine. Carefully lift th...

392 5-2. Steps to take in an emergency ■ Overheating If you observe the following, your vehicle may be overheating. ● The engine coolant temperature gauge enters the red zone or a loss ofpower is experienced. ● Steam is coming from under the hood. CAUTION ■ To prevent an accident or injury when insp...

394 5-2. Steps to take in an emergency If the vehicle becomes stuck CAUTION ■ When attempting to free a stuck vehicle If you choose to rock the vehicle back and forth to free it, make sure the sur-rounding area is clear, to avoid striking other vehicles, objects or persons.The vehicle may also lunge...

396 6-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions and weights * 1 : Vehicles without front and rear bumper spoilers * 2 : Vehicles with front and rear bumper spoilers * 3 : Vehicles without double wishbone rear suspension * 4 : Vehicles with double wishbone rear suspension ...

397 6-1. Specifications 6 Vehicl e sp ecification s Vehicle identification ■ Vehicle identification number The vehicle identification number (VIN) is the legal identifier for yourvehicle. This is the primary identification number for your Toyota. It isused in registering the ownership of your vehicl...

398 6-1. Specifications ■ Engine number The engine number is stamped on the engine block as shown. 1.8 L 4-cylinder (2ZR-FE) engine 2.4 L 4-cylinder (2AZ-FE) engine

399 6-1. Specifications 6 Vehicl e sp ecification s Engine 1.8 L 4-cylinder (2ZR-FE) engine *: Drive belt tension measured with Borroughs drive belt tension gauge No.BT-33-73F (used belt), lb. Model 2ZR-FE engine Type 4 cylinder in line, 4 cycle, gasoline Bore and stroke 3.17 × 3.48 in. (80.5 × 88.3...

400 6-1. Specifications 2.4 L 4-cylinder (2AZ-FE) engine Fuel Model 2AZ-FE engine Type 4 cylinder in line, 4 cycle, gasoline Bore and stroke 3.48 × 3.78 in. (88.5 × 96.0 mm) Displacement 144.1 cu.in. (2362 cm 3 ) Drive belt tension Automatic adjustment Valve clearance (engine cold) Intake Exhaust 0....

401 6-1. Specifications 6 Vehicl e sp ecification s Lubrication system ■ Engine oil selection “Toyota Genuine Motor Oil” is used in your Toyota vehicle. UseToyota approved “Toyota Genuine Motor Oil” or equivalent to satisfythe following grade and viscosity. Oil grade: ILSAC multigrade engine oil Rec...

402 6-1. Specifications How to read oil container label: The ILSAC (International Lubricant Standardization and ApprovalCommittee) Certification Mark is added to some oil containers to helpyou select the oil you should use.

403 6-1. Specifications 6 Vehicl e sp ecification s Cooling system Ignition system Capacity (reference) 1.8 L 4-cylinder (2ZR-FE) engine5.8 qt. (5.5 L, 4.8 Imp. qt.)2.4 L 4-cylinder (2AZ-FE) engine6.0 qt. (5.7 L, 5.0 Imp. qt.) Coolant type Use either of the following. • “Toyota Super Long Life Coola...

405 6-1. Specifications 6 Vehicl e sp ecification s Rear differential (AWD models) Transfer (AWD models) Clutch NOTICE ■ Automatic transmission fluid type Using automatic transmission fluid other than “Toyota Genuine ATF WS”may cause deterioration in shift quality, locking up of your transmissionacc...

406 6-1. Specifications Brakes * 1 : Minimum pedal clearance when depressed with a force of 66 lbf (294 N, 30 kgf) while the engine is running * 2 : 2.4 L 4-cylinder (2AZ-FE) engine with 18-inch tires or AWD models * 3 : Parking brake lever travel when pulled up with a force of 44 lbf (200 N, 20 kgf...

407 6-1. Specifications 6 Vehicl e sp ecification s Steering Tires and wheels Type A Type B Free play Less than 1.2 in. (30 mm) Tire size P205/55R16 89H, T135/70R16 100M Tire inflation pressure(Recommended cold tire inflation pressure) Front: 32 psi (220 kPa, 2.2 kgf/cm 2 or bar) Rear: 32 psi (220 k...

409 6-1. Specifications 6 Vehicl e sp ecification s Type E Type F Tire size P215/45R17 87W, T135/80R16 101M Tire inflation pressure(Recommended cold tire inflation pressure) Front: 32 psi (220 kPa, 2.2 kgf/cm 2 or bar) Rear: 32 psi (220 kPa, 2.2 kgf/cm 2 or bar) Spare: 60 psi (420 kPa, 4.2 kgf/cm 2 ...

410 6-1. Specifications Type G Tire size P215/45R18 89W, T135/70R17 102M Tire inflation pressure(Recommended cold tire inflation pressure) Front: 32 psi (220 kPa, 2.2 kgf/cm 2 or bar) Rear: 32 psi (220 kPa, 2.2 kgf/cm 2 or bar) Spare: 60 psi (420 kPa, 4.2 kgf/cm 2 or bar) Wheel size 18 × 7 J, 17 × 4...

412 6-1. Specifications Fuel information ■ Fuel tank opening for unleaded gasoline To help prevent incorrect fueling, your Toyota has a fuel tank opening thatonly accommodates the special nozzle on unleaded fuel pumps. ■ If your engine knocks ● Consult your Toyota dealer. ● You may occasionally noti...

413 6-1. Specifications 6 Vehicl e sp ecification s ■ Toyota recommends the use of gasoline containing detergent additives ● Toyota recommends the use of gasoline that contains detergent additivesto avoid build-up of engine deposits. ● All gasoline sold in the U.S. contains detergent additives to cl...

414 6-1. Specifications NOTICE ■ Notice on fuel quality ● Do not use improper fuels. If improper fuels are used the engine will bedamaged. ● Do not use leaded gasoline.Leaded gasoline can cause damage to your vehicle’s catalytic converterscausing the emission control system to malfunction. ● Do not ...

415 6-1. Specifications 6 Vehicl e sp ecification s Tire information Typical tire symbols Full-size tire Compact spare tire Tire size ( → P. 418) DOT and Tire Identification Number (TIN) ( → P. 417) Uniform tire quality grading For details, see “Uniform Tire Quality Grading” that follows. Location o...

416 6-1. Specifications Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are thestrands which form the plies in a tire. Radial tires or bias-ply tires A radial tire has “RADIAL” on the sidewall. A tire not marked“RADIAL” is a bias-ply tire. TUBELESS or TUBE ...

417 6-1. Specifications 6 Vehicl e sp ecification s Typical DOT and Tire Identification Number (TIN) DOT symbol * Tire Identification Number(TIN)Tire manufacturer's identifica-tion markTire size codeManufacturer's optional tiretype code (3 or 4 letters)Manufacturing weekManufacturing year * : The DO...

419 6-1. Specifications 6 Vehicl e sp ecification s Tire section names BeadSidewallShoulderTreadBeltInner linerReinforcing rubberCarcassRim linesBead wiresChafer Uniform Tire Quality Grading This information has been prepared in accordance with regulationsissued by the National Highway Traffic Safet...

420 6-1. Specifications ■ Treadwear The treadwear grade is a comparative rating based on the wearrate of the tire when tested under controlled conditions on a speci-fied government test course. For example, a tire graded 150 would wear one and a half (1-1/2)times as well on the government course as ...

421 6-1. Specifications 6 Vehicl e sp ecification s Warning: The temperature grades for this tire are established for atire that is properly inflated and not overloaded.Excessive speed, underinflation, or excessive loading, either sepa-rately or in combination, can cause heat buildup and possible ti...

427 6 Vehicl e sp ecification s 6-2. Customization Customizable features Item Function Default setting Customized setting Wireless remote con-trol (if equipped) ( → P. 26) Wireless remote control On Off Unlocking operation Driver's door unlocked in one step, all doors unlocked in two steps All doors...

429 6 Vehicl e sp ecification s 6-3. Initialization Items to initialize Item When to initialize Reference Engine oil mainte-nance data (U.S.A. only) After changing engine oil P. 298 Tire pressure warning system (if equipped) • When rotating the tires on vehicles differing with front and rear tire in...

433 7 For owners Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructionsextracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions inEnglish. Utilisation correcte des ceintures...

434 Entretien et soin ■ Ceintures de sécurité Nettoyez avec un chiffon ou une éponge humectée d'eausavonneuse tiède. Profitez de l'occasion pour vérifierrégulièrement que les ceintures ne sont pas effilochées, entaillées,ou ne paraissent pas exagérément usées. ATTENTION ■ Détérioration et usure des ...

437 Alphabetical index Alphabetical index A/C ............................................ 168ABS........................................... 142Active torque control 4WD system ................................... 142 Air conditioning filter .............. 323Air conditioning system Air conditioning ...

448 GAS STATION INFORMATION Auxiliary catch lever P. 289 Fuel filler door P. 61 Hood lock release lever P. 289 Fuel filler door opener P. 61 Tire inflation pressure P. 407 Fuel tank capacity 13.2 gal. (50 L, 10.9 Imp. gal.) Fuel type Unleaded gasoline only P. 62, 400 Cold tire inflation pressure P. ...