Toyota 2010 Highlander- Manuals

4 OVERVIEW Indicator symbols Instrument cluster TachometerEngine coolant temperatureService indicator and reminderFuel gaugeSpeedometerOdometer/trip meter switch and trip meter resetting buttonAutomatic Transmission shift position indicatorOdometer and two trip meters Charging system warning 1 Brake...

6 OVERVIEW Keyless entry Push Push ONCE: Driver door TWICE: All doors Locking operation Unlocking operation Without Smart Key system With Smart Key system Without Smart Key system With Smart Key system Glass hatch operation (if equipped) Power back door operation (if equipped) Push and hold Without ...

7 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Smart Key system (if equipped) Start function Accessories such as the radio will operate. Power ON; the engine not running. All systems OFF. ACC ON OFF NOTE: Gear shift lever must be in Park and brake pedal depressed. Push Depressbrake...

8 Hood release Pull up latch andraise hood Pull Fuel tank door release and cap NOTE: Tighten until one click is heard. If the cap is not tightenedenough, Check Engine “ ” indicator may illuminate. Pull Turn Store Engage support rod OVERVIEW

10 FEATURES/OPERATIONS Automatic Transmission * The ignition switch must be “ON” and the brake pedal depressed to shift from Park. Downshifting increases power going uphill, or provides engine brakingdownhill. For best fuel economy during normal driving conditions, alwaysdrive with the shift lever i...

11 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Steering lock release Turn Turn Door locks Lock Unlock Smart Key system Without Smart Key system Push Push Turn Auto lock functions Automatic door locks can be programmed to operate in two differentmodes, or turned OFF. - Doors lock w...

12 FEATURES/OPERATIONS Hold wheel, push lever down, set angle and length, and return lever. Angle Length Lock release lever NOTE: Do not attempt to adjust while the vehicle is in motion. Tilt and telescopic steering wheel Moonroof (if equipped) Sliding operation Tilting operation Open Tilt Close Clo...

13 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Seat adjustments-Rear Second row seat Seat position (forward/backward)Seatback angleThird seat access leverSeatback release Refer to the Owner’s Manual for more details. Seat adjustments-Front Seat position (forward/backward)Seat cush...

14 FEATURES/OPERATIONS Seats-Head restraints Front Rear Lock release button Lock release button (1) Remove the second row console from the front center console box.(2) Lower the center head restraint.(3) Pull the strap, then fold down the seatback.(4) Pull the lever behind the second center seat and...

15 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES From outside Left side/center remote seat release Right side remote seat release (2) Fold down From inside Windshield wipers & washers Interval wipe Single wipe Slow Fast Pull to wash and wipe Front Rear Wash and wipe Wipe Interva...

16 Lights & turn signals Turn signals Headlights High beam flasher Low beam Front fog lights (if equipped) Headlights -Daytime Running Light system (DRL) (if equipped) Automatically turns on the turn signal lights at a reduced intensity. -Automatic light cut off system Automatically turns lights...

17 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Power outlets-12V DC Luggage compartment Instrument panel (with seat heater) Instrument panel (without seat heater) Key/Engine switch must be in the “ACC” or “ON” position to be used. Power outlets-115V AC (if equipped) ON/OFF switch ...

18 FEATURES/OPERATIONS Multi-information display (if equipped) Push “DISP” to change information in the following: (1) Average gas mileage after refueling(2) Current gas mileage(3) Miles left on remaining fuel(4) Driving distance from engine start(5) Average gas mileage(6) Average gas mileage histor...

19 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Bluetooth ® technology allows dialing or receipt of calls without taking hands from the steering wheel or using a cable to connect the telephoneand the system. Refer to “Hands-free phone system (for cellular phone),” Section 3-4 inthe...

20 FEATURES/OPERATIONS Air Conditioning/Heating Rear manual Air Conditioning (if equipped) Front manual Air Conditioning Airflow ventTemperature selectorFan speed Fan speedOutside rearview mirror (if equipped)/Rear window defoggerTemperature selectorFresh or recirculated cabin airAirflow ventIn “ ” ...

21 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Front automatic Air Conditioning Automatic climate control ONAdjusting the temperature setting will cause the airflow vents, airintake and fan to adjust automatically.Windshield airflow/defoggerRear Air Conditioning ON/OFFFan speedOut...

22 FEATURES/OPERATIONS Rear automatic Air Conditioning (if equipped) Fan speedTemperature selectorAirflow ventAutomatic climate control ONClimate control OFF Seat heaters (if equipped) Push Turn Push knob to pop the controller out. Turn clockwise for heater. Push Clock H- Hour set M- Minute set With...

23 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Garage door opener (HomeLink ® )* (if equipped) Garage door openers manufactured under license from HomeLink ® * can be programmed to operate garage doors, estate gates, security lighting, etc. Refer to “Garage door opener,” Section 3...

24 FEATURES/OPERATIONS Type 2 additional functions Type 3 (with JBL speakers and Bluetooth ® function) Audio Eject CD Push to turnON/OFF View CDtext Seek station/CD track select Station/CDtrack scan Mode AM/Satellite Radio Preset buttons - functions in othermodes indicated above number Load CD(s) Ty...

25 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES RADIO To preset stations Tune in the desired station and hold down a preset button (1-6) until you hear a beep. Push desired preset button (1-6) toselect. To scan stations Push and hold “SCAN” to scan preset stations. Push again to ho...

26 FEATURES/OPERATIONS Rear seat entertainment system (if equipped) Remote controlDVD playerHeadphone volume control and headphone jacksDVD screen115V AC Power outlet ON/OFF switchFront audio systemA/V input adapter115V AC Power outletWireless headphones DAC helps the vehicle to descend steep hills ...

27 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Cup holders Front Console box Rear Side table HAC helps prevent rolling backwards on an incline. To engage, pushfurther down on brake pedal while at a complete stop until a beep soundsand slip indicator illuminates. HAC holds for appr...

28 SAFETY AND EMERGENCY FEATURES If belt is fully extended, then retracted even slightly, it cannot bere-extended beyond that point, unless fully retracted again. This featureis used to help hold child restraint systems securely. To find more information about seat belts, and how to install a childr...

592 Abbreviation list Abbreviation/Acronym list ABBREVIATIONS MEANING 2WD 2 Wheel Drive 4WD 4 Wheel Drive A/C Air Conditioning ABS Anti-lock Brake System ACC Accessory ALR Automatic Locking Retractor CRS Child Restraint System DAC Downhill Assist Control DISP Display ECU Electronic Control Unit EDR ...

24 For your information Main Owner’s Manual Please note that this manual covers all models and all equipment, includingoptions. Therefore, you may find some explanations for equipment notinstalled on your vehicle. All specifications provided in this manual are current at the time of printing.However...

26 CAUTION ■ General precautions while driving Driving under the influence: Never drive your vehicle when under the influ-ence of alcohol or drugs that have impaired your ability to operate your vehi-cle. Alcohol and certain drugs delay reaction time, impair judgment andreduce coordination, which co...

27 Symbols used throughout this manual Cautions & Notices Symbols used in illustrations CAUTION This is a warning against anything which may cause death or injury to people ifthe warning is ignored. You are informed about what you must or must not doin order to reduce the risk of injury to yours...

TABLE OF CONTENTS 1 1 Before driving Adjusting and operating features such as door locks, mirrors, and steering column. 2 When driving Driving, stopping and safe-driving information. 3 Interior features Air conditioning and audio systems, as well as other interior features for a comfortable driving ...

30 1-1. Key information Keys The following keys are provided with the vehicle. Vehicles without smart key system (type A) Master keys Valet key Key number plate Vehicles without smart key system (type B) Master keys Valet key Key number plate Vehicles with smart key system Electronic keys • Operatin...

31 1-1. Key information 1 Before driving Using the mechanical key (vehicles with smart key system) Take out the mechanical key. After using the mechanical key,store it in the electronic key. Carrythe mechanical key together withthe electronic key. If the electronickey battery is depleted, you willne...

32 1-1. Key information NOTICE ■ To prevent key damage ● Do not subject the keys to strong shocks, expose them to high tempera-tures by placing them in direct sunlight, or get them wet. ● Do not expose the keys to electromagnetic materials or attach any mate-rial that blocks electromagnetic waves to...

33 1 Before driving 1-2. Opening, closing and locking the doors Smart key system ∗ The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. (The driver should always carry the electronic key.) Locks and unlocks thedoors ( → P. 34) St...

34 1-2. Opening, closing and locking the doors Unlocking and locking the doors Front door handles Grip the handle to unlock thedoors. Make sure to touch the sensor onthe back of the handle. The door cannot be unlocked for3 seconds after the door islocked. Opens the glass hatch ( → P. 36) Locks and u...

35 1-2. Opening, closing and locking the doors 1 Before driving Press the lock button to lock thedoors. Back door handle Press the button to unlock thedoor. The door cannot be unlocked for3 seconds after the door islocked. Lock the back door again whenyou leave the vehicle. The backdoor will not loc...

36 1-2. Opening, closing and locking the doors Opening the glass hatch Press and hold the button toopen the glass hatch. The glasshatch will pop up. The glass hatch can be unlockedonly when the back door isclosed. Lock the glass hatch again whenyou leave the vehicle. The glasshatch will not lock aut...

39 1-2. Opening, closing and locking the doors 1 Before driving The setting changes each time an operation is performed, as shown below.(When changing the setting continuously, release the buttons, wait for atleast 5 seconds, and repeat step 2.) Unlock the doors using the wireless remote control and...

41 1-2. Opening, closing and locking the doors 1 Before driving ● The doors may unlock if a large amount of water splashes on the doorhandle, such as in the rain or in a car wash. (The doors will automaticallybe locked after approximately 60 seconds if the doors are not openedand closed.) ● Gripping...

43 1-2. Opening, closing and locking the doors 1 Before driving * : A message will be shown on the multi-information display. ■ If the smart key system does not operate properly ● Locking and unlocking the doors: Use the mechanical key. ( → P. 539) ● Starting the engine. ( → P. 539) ■ When the elect...

44 1-2. Opening, closing and locking the doors ■ Customization that can be configured at Toyota dealer It is possible to deactivate the smart key system etc. (Customizable features → P. 582) ■ Certification for the smart key system For vehicles sold in the U.S.A. FCC ID: NI4TMLF-3 NOTE:This device c...

48 1-2. Opening, closing and locking the doors For vehicles sold in Canada NOTE:Operation is subject to the following two conditions: (1) this device may notcause interference, and (2) this device must accept any interference, includ-ing interference that may cause undesired operation of the device.

53 1-2. Opening, closing and locking the doors 1 Before driving CAUTION ■ Caution regarding interference with electronic devices ● People with implanted pacemakers or cardiac defibrillators should keepaway from the smart key system antennas. ( → P. 36) The radio waves may affect the operation of suc...

54 1-2. Opening, closing and locking the doors Wireless remote control The wireless remote control can be used to lock and unlock the vehi- cle from outside the vehicle. Vehicles without smart key system (type A) Locks all doors Unlocks all doors Pressing the button unlocksthe driver’s door. Pressin...

57 1-2. Opening, closing and locking the doors 1 Before driving ■ Key battery depletion Vehicles without smart key system The standard battery life is 1 to 2 years. (The battery becomes depletedeven if the key is not used.) If the wireless remote control function does notoperate, the battery may be ...

58 1-2. Opening, closing and locking the doors ■ Conditions affecting operation Vehicles without smart key system The wireless remote control function may not operate normally in the follow-ing situations. ● Near a TV tower, radio station, electric power plant, airport or other facil-ity that genera...

59 1-2. Opening, closing and locking the doors 1 Before driving ■ Certification for wireless remote control For vehicles sold in the U.S.A. NOTE:This device complies with Part 15 of the FCC Rules. Operation is subject tothe following two conditions: (1) This device may not cause harmful interfer-enc...

66 1-2. Opening, closing and locking the doors Side doors The vehicle can be locked and unlocked using the entry function, wireless remote control, key or door lock switch. ■ Entry function (vehicles with smart key system) → P. 33 ■ Wireless remote control → P. 54 ■ Key Vehicles without smart key sy...

67 1-2. Opening, closing and locking the doors 1 Before driving ■ Door lock switch Locks all doors Unlocks all doors ■ Inside lock button Locks the door Unlocks the door Pulling the door handle canopen the front door even if thelock button is in the lock posi-tion.

68 1-2. Opening, closing and locking the doors Rear door child-protector lock The door cannot be opened frominside the vehicle when the lockis set. These locks can be set to preventchildren from opening the reardoors. Push down on each reardoor switch to lock both reardoors. Automatic door locking a...

69 1-2. Opening, closing and locking the doors 1 Before driving Shift the shift lever to P or N, andpress and hold the driver's doorlock switch ( or ) for approx- imately 5 seconds and thenrelease it. The shift lever and switch posi-tions corresponding to thedesired function to be set or can-celed a...

70 1-2. Opening, closing and locking the doors CAUTION ■ To prevent an accident Observe the following precautions while driving the vehicle.Failing to do so may result in a door opening and an occupant falling out,resulting in death or serious injury. ● Always use a seat belt. ● Always lock the door...

71 1 1-2. Opening, closing and locking the doors Before driving Back door The back door can be locked/unlocked and opened by the following procedures. ■ Locking and unlocking the back door Door lock switch → P. 67 Entry function (vehicles with smart key system) → P. 34 Wireless remote control → P. 5...

72 1-2. Opening, closing and locking the doors Power back door switch (vehicles with power back door) Push the switch to close. Pushing the switch again whilethe power back door is closingwill cause it to open again. However, the reverse operationcannot be performed for the firstsecond after pushing...

73 1-2. Opening, closing and locking the doors 1 Before driving Canceling the power back door system (vehicles with power back door) Turn the main switch in the glovebox off to disable the power backdoor system. On Off The back door cannot be openedeven with the wireless remotecontrol or power back ...

74 1-2. Opening, closing and locking the doors ■ If the back door opener is inoperative The back door can be operated from the inside. ■ The power back door can be opened when ● The “ENGINE START STOP” switch is in IGNITION ON mode, and theshift lever is in P. ● The “ENGINE START STOP” switch is in ...

76 1-2. Opening, closing and locking the doors CAUTION ■ Jam protection function (vehicles with power back door) ● Never try jamming any part of your body to activate the jam protectionfunction intentionally. ● The jam protection function may not work if something gets caught justbefore the back doo...

77 1 1-2. Opening, closing and locking the doors Before driving Glass hatch ∗ ■ Opening and closing the glass hatch ● Make sure that the rear wiper is switched off. ● Do not rotate the rear wiper arm while the glass hatch is opening. (If therear wiper arm is rotated, close the glass hatch as it is t...

78 1-2. Opening, closing and locking the doors CAUTION ■ Operating the glass hatch ● Do not open the glass hatch while the vehicle is moving. ● Do not open the glass hatch while the rear wiper is switched on. (If the rearwiper is switched on while the glass hatch is opening, the wiper motordrive dis...

79 1 Before driving 1-3. Adjustable components (seats, mirrors, steering wheel) Front seats Manual seat Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever (driver’s side only) Seat cushion (front) angle adjustment knob (driver’s side only) Pull up the lev...

80 1-3. Adjustable components (seats, mirrors, steering wheel) Active head restraints When the occupant’s lower backpresses against the seatbackduring a rear-end collision, thehead restraint moves slightly for-ward and upward to help reducethe risk of whiplash on the seatoccupant. Power seat Seat po...

81 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving ■ Active head restraints Even small forces applied to the seatback may cause the head restraint tomove. Pushing up a locked head restraint forcibly may appear the headrestraint inner structure. These do not indicate prob...

82 1-3. Adjustable components (seats, mirrors, steering wheel) Rear seats ■ Second seats Seat position adjustmentlever Seatback angle adjustmentlever Pull up the lever until the lockis completely released.

84 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Getting out of the vehicle (right side only) Lift the lever on the side of theseatback and fold down the seat-back. The seat will slide forward. Move the seat to the front-mostposition. ■ After passengers have entered/exited the vehicl...

85 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving ■ Folding down the second seats From inside Pull the lever to unlock the seat-back and then fold the seatbackdown. From outside (if equipped) Pull the lever. L: Left side and center second seats R: Right side second seat...

86 1-3. Adjustable components (seats, mirrors, steering wheel) Folding down the third seats (vehicles with third seats) ■ Before folding down the third seats Stow the third seat belt buckles. Pass the seat belts through theseat belt hangers. This prevents the shoulder beltfrom being damaged. Make su...

87 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving ■ Folding down the third seats Pull the strap on the third seat-back fold-down lever toward youto fold down the seatback. Removing the second center seat ■ Before removing the second center seat Take out the side table f...

89 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving Installing the second center seat ■ Before installing the second center seat Take out the second center seatfrom the console box. Remove the side table, if used, from the second seat. ( → P. 386) ■ Installing the second ...

91 1 1-3. Adjustable components (seats, mirrors, steering wheel) Before driving Head restraints Head restraints are provided for all seats. ■ Adjusting the head restraints Front seats Vertical adjustment Up Pull the head restraints up. Down Push the head restraint downwhile pushing the lock releaseb...

92 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Adjusting the height of the head restraints (except second center seatand third seats) ■ Removing the front and second seat outer head restraints (type A) Pull the head restraint up while pushing the lock release button. While pushing ...

93 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving ■ Removing the front and second seat outer head restraints (type B) ■ Installing the front and second seat outer head restraints CAUTION ■ Head restraint precautions Observe the following precautions regarding the head r...

94 1-3. Adjustable components (seats, mirrors, steering wheel) Seat belts Make sure that all occupants are wearing their seat belts before driv- ing the vehicle. ■ Correct use of the seat belts ● Extend the shoulder belt sothat it comes fully over theshoulder, but does notcome into contact with then...

95 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving Seat belt pretensioners (front seats) The pretensioner helps the seatbelt to quickly restrain the occu-pant by retracting the seat beltwhen the vehicle is subjected tocertain types of severe frontalcollision or a vehicle...

96 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Pregnant women ■ People suffering illness Obtain medical advice and wear the seat belt in the proper way. ■ When not using the rear seat belts Second seat belts Third seat belts (vehicles with third seat) Obtain medical advice and wear...

97 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving ■ Child seat belt usage The seat belts of your vehicle were principally designed for persons of adultsize. ● Use a child restraint system appropriate for the child, until the childbecomes large enough to properly wear th...

98 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ● Do not recline the seat any more than necessary to achieve a proper seat-ing position. The seat belt is most effective when the occupants are sittingup straight and well back in the seats. ● Do not wear the shoulder belt under ...

99 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving CAUTION ■ Seat belt damage and wear ● Do not damage the seat belts by allowing the belt, plate, or buckle to bejammed in the door. ● Inspect the seat belt system periodically. Check for cuts, fraying, and looseparts. Do ...

100 1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel CAUTION ■ Caution while driving Do not adjust the steering wheel while driving.Doing so may cause the driver to mishandle the vehicle and an accident,resulting in death or serious injury. ■ After adjusting the steering wh...

101 1 1-3. Adjustable components (seats, mirrors, steering wheel) Before driving Anti-glare inside rear view mirror Glare from the headlights of vehicles behind can be reduced by using the following functions. Manual anti-glare inside rear view mirror Normal position Anti-glare position Auto anti-gl...

103 1 1-3. Adjustable components (seats, mirrors, steering wheel) Before driving Outside rear view mirrors Mirror angle can be adjusted using the switches. Select a mirror to adjust. Left Right Adjust the mirror. Up Right Down Left STEP 1 STEP 2

104 1-3. Adjustable components (seats, mirrors, steering wheel) Folding back the mirrors Push backward to fold the mir-rors. ■ The outside rear view mirrors can be operated when Vehicles without smart key system The engine switch is in the “ACC” or “ON” position. Vehicles with smart key system The “...

105 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving CAUTION ■ When driving the vehicle Observe the following precautions while driving.Failing to do so may result in loss of control of the vehicle and cause an acci-dent, resulting in death or serious injury. ● Do not adj...

106 1-4. Opening and closing the windows and moon roof Power windows Lock switch Press the switch down to lockthe passenger window switches. Use this switch to prevent chil-dren from accidentally opening orclosing a passenger window. The power windows can be opened and closed using the following swi...

107 1-4. Opening and closing the windows and moon roof 1 Before driving ■ The power windows can be operated when Vehicles without smart key system The engine switch is in the “ON” position. Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. ■ Operating the power wi...

108 1-4. Opening and closing the windows and moon roof Moon roof ∗ Use the overhead switches to open, close, and tilt the moon roof up and down. ■ Opening and closing Open The moon roof stops slightlybefore the fully opened posi-tion.Move the switch backwardagain to fully open. Close Move the switch...

110 1-4. Opening and closing the windows and moon roof ■ Moon roof open reminder function (vehicles with multi-information dis-play) Vehicles without smart key system An alarm will sound when the driver’s door is opened with the moon roof notfully closed and the engine switch OFF. Vehicles with smar...

111 1 Before driving 1-5. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap. ■ Before refueling the vehicle Vehicles without smart key system Turn the engine switch OFF and ensure that all the doors andwindows are closed. Vehicles with smart key system Turn th...

112 1-5. Refueling Closing the fuel tank cap When replacing the fuel tankcap, turn it until a clicking soundis heard. After releasing your hand, the capwill turn slightly to the oppositedirection. Hang the fuel tank cap on theback of the fuel filler door. STEP 3 ■ Fuel types Use unleaded gasoline. (...

113 1-5. Refueling 1 Before driving CAUTION ■ Refueling the vehicle Observe the following precautions while refueling the vehicle. Failure to do so may result in death or serious injury. ● Touch the vehicle or some other metal surface to discharge any staticelectricity.Sparks resulting from discharg...

114 1-5. Refueling NOTICE ■ Refueling Do not spill fuel during refueling.Doing so may damage the vehicle, such as causing the exhaust systems tooperate abnormally or damaging fuel system components or the vehicle'spainted surface.

115 1 Before driving 1-6. Theft deterrent system Engine immobilizer system ∗ The vehicle's keys have built-in transponder chips that prevent the engine from starting if the key has not been previously registered in the vehicle's on-board computer. Never leave the keys inside the vehicle when you lea...

116 1-6. Theft deterrent system Vehicles with navigation system Vehicles without smart keysystem: The indicator lightflashes after the key has beenremoved from the engineswitch to indicate that the sys-tem is operating. Vehicles with smart key sys-tem: The indicator light flashesafter the “ENGINE ST...

117 1-6. Theft deterrent system 1 Before driving ■ System maintenance The vehicle has a maintenance-free type of engine immobilizer system. ■ Conditions that may cause the system to malfunction ● If the key is in contact with a metallic object ● If the key is in close proximity to or touching a key ...

121 1-6. Theft deterrent system 1 Before driving NOTICE ■ To prevent damage to the key Do not modify, remove or disable the engine immobilizer system. If any unauthorized changes or modifications are made, the proper opera-tion of the system cannot be guaranteed.

122 1-6. Theft deterrent system Alarm ∗ The system sounds the alarm and flashes the lights when forcible entry is detected. ■ Triggering of the alarm The alarm is triggered in the following situations. ● A locked door is unlocked or opened in any way other thanusing the wireless remote control door ...

123 1-6. Theft deterrent system 1 Before driving ■ Setting the alarm system Vehicles without navigation system Close the doors and hood,and lock all doors using thewireless remote control doorlock function or entry function(vehicles with smart key sys-tem). The system will be setautomatically after ...

124 1-6. Theft deterrent system ■ Items to check before locking the vehicle To prevent unexpected triggering of the alarm and vehicle theft, make sureof the following. ● Nobody is in the vehicle. ● The windows and moon roof are closed before the alarm is set. ● No valuables or other personal items a...

126 1-7. Safety information Correct driving posture Drive in a good posture as follows: Sit upright and well back inthe seat. ( → P. 79) Adjust the position of theseat forward or backward toensure the pedals can bereached and easilydepressed to the extentrequired. ( → P. 79) Adjust the seatback so t...

127 1-7. Safety information 1 Before driving CAUTION ■ While driving ● Do not adjust the position of the driver's seat while driving.Doing so could cause the driver to lose control of the vehicle. ● Do not place a cushion between the driver or passenger and the seatback.A cushion may prevent correct...

128 1-7. Safety information SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. Front airbags Driver airbag/...

129 1-7. Safety information 1 Before driving Airbag system components Your vehicle is equipped with ADVANCED AIRBAGS designed basedon US motor vehicle safety standards (FMVSS208). The airbag sys-tem controls airbag deployment power for the driver and front pas-senger. The driver airbag system consis...

130 1-7. Safety information The main SRS airbag system components are shown above. TheSRS airbag system is controlled by the airbag sensor assembly. Theairbag sensor assembly consists of a safing sensor and an airbagsensor. In certain types of severe frontal or side impacts, the SRS airbag sys-tem t...

131 1-7. Safety information 1 Before driving ■ Operating conditions (front airbags) ● The SRS front airbags will deploy if the severity of the frontal impact isabove the designed threshold level, comparable to an approximate 15mph (25 km/h) collision when the vehicle impacts straight into a fixed ba...

134 1-7. Safety information ■ When to contact your Toyota dealer In the following cases, contact your Toyota dealer as soon as possible. Donot disconnect the battery cables before contacting your Toyota dealer. ● Any of the SRS airbags have been inflated. ● The front of the vehicle is damaged ordefo...

135 1-7. Safety information 1 Before driving CAUTION ■ SRS airbag precautions Observe the following precautions regarding the airbags. Failure to do so may cause death or serious injury. ● The driver and all passengers in the vehicle must wear their seat beltsproperly.The SRS airbags are supplementa...

138 1-7. Safety information CAUTION ■ SRS airbag precautions ● If the vinyl cover is put on the area where the SRS knee airbag will deploy,be sure to remove it. ● Do not use seat accessories which cover the parts where the SRS sideairbags inflate as they may interfere with inflation of the airbags. ...

139 1-7. Safety information 1 Before driving CAUTION ■ SRS airbag precautions ● Do not touch any of the component parts immediately after the SRS air-bags have deployed (inflated) as they may be hot. ● If breathing becomes difficult after the SRS airbag has deployed, open adoor or window to allow fr...

140 1-7. Safety information Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classifica- tion system. This system detects the conditions of the front passen- ger seat and activates or deactivates the devices for front passenger. Vehicles without...

141 1-7. Safety information 1 Before driving Conditions and operation of the front passenger occupantclassification system ■ Adult* 1 ■ Child* 3 or child restraint system* 4 Indicator/ warning light “AIR BAG ON” and “AIR BAG OFF” indi- cator lights “AIR BAG ON” SRS warning light Off Front passenger'...

142 1-7. Safety information ■ Unoccupied ■ There is a malfunction in the system * 1 : The system judges a person of adult size as an adult. When a smaller adult sits in the front passenger seat, the system may rec-ognize him/her as a child depending on his/her physique and pos-ture. * 2 : In the eve...

143 1-7. Safety information 1 Before driving * 4 : Never install a rear-facing child restraint system on the front pas- senger seat. A forward-facing child restraint system should onlybe installed on the front passenger seat when it is unavoidable.( → P. 147) * 5 : In case the indicator is not illum...

144 1-7. Safety information CAUTION ■ Front passenger occupant classification system precautions Observe the following precautions regarding front passenger occupant clas-sification system. Failure to do so may cause death or serious injury. ● Wear the seat belt properly. ● Make sure the front passe...

145 1-7. Safety information 1 Before driving CAUTION ■ Front passenger occupant classification system precautions ● If an adult sits in the front passenger seat, the “AIR BAG ON” indicatorlight is illuminated. If the “AIR BAG OFF” indicator is illuminated, ask thepassenger to sit up straight, well b...

146 1-7. Safety information Child restraint systems Points to remember Studies have shown that installing a child restraint on a rear seat ismuch safer than installing one to the front passenger seat. ● Choose a child restraint system that suits your vehicle and isappropriate to the age and size of ...

147 1-7. Safety information 1 Before driving Types of child restraints Child restraint systems are classified into the following 3 typesaccording to the age and size of the child. Rear facing ⎯ Infant seat/convertible seat Forward facing ⎯ Convertible seat Booster seat

148 1-7. Safety information ■ Selecting an appropriate child restraint system ● Use a child restraint system appropriate for the child until the childbecomes large enough to properly wear the vehicle’s seat belt. ● If a child is too large for a child restraint system, sit the child on a rearseat and...

150 1-7. Safety information CAUTION ■ When the child restraint system is not in use ● Keep the child restraint system properly secured on the seat even if it isnot in use.Do not store the restraint unsecured in the passenger compartment. ● If it is necessary to detach the child restraint system, rem...

151 1 1-7. Safety information Before driving Installing child restraints Follow the child restraint system manufacturer's instructions. Firmly secure child restraints to the rear seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shou...

153 1-7. Safety information 1 Before driving Installation with LATCH system Fold the seatback while pullingthe lever. Return the seatbackand secure it at the 1st lock posi-tion (most upright position).Adjust the seatback to the 3rdlock position. ( → P. 82) 1st lock position 3rd lock position Type A ...

154 1-7. Safety information Type B Latch the buckles onto theLATCH anchors. The bars are installed in theclearance between the seat cush-ion and seatback. If the child restraint has a toptether strap, the top tether strapshould be latched onto the toptether strap anchors. For owners in Canada:The sy...

157 1-7. Safety information 1 Before driving While pushing the child seat intothe rear seat, allow the shoulderbelt to retract until the child seatis securely in place. After the shoulder belt hasretracted to a point where there isno slack in the belt, pull the belt tocheck that it cannot be extende...

159 1-7. Safety information 1 Before driving Outside seat: Open the anchorbracket cover, latch the hookonto the anchor bracket andtighten the top tether strap. Center seat: Latch the hook ontothe anchor bracket and tightenthe top tether strap. Make sure the top tether strap issecurely latched. Hook ...

160 1-7. Safety information CAUTION ■ When installing a booster seat Do not fully extend the shoulder belt to prevent the belt from going to ALRlock mode. ( → P. 95) ALR mode causes the belt to tighten only which could cause injury or dis-comfort to the child. ■ When installing a child restraint sys...

161 1-7. Safety information 1 Before driving CAUTION ■ When installing a child restraint system ● When installing a child restraint system in the rear center seat, adjust bothseat cushions to the same position and align seatbacks at the same angle.The seatbacks must be adjusted to the same angle. Ot...

188 2-2. Instrument cluster Gauges and meters Vehicles without smart key systemThe following gauges and meters illuminate when the engineswitch is in the “ON” position. Vehicles with smart key systemThe following gauges and meters illuminate when the “ENGINESTART STOP” switch is in IGNITION ON mode....

189 2-2. Instrument cluster 2 Wh en drivin g Instrument panel light control The brightness of the instrument panel lights can be adjusted. Brighter Darker When the headlight switch isturned on, the brightness willbe reduced slightly unless thecontrol dial is turned fully up. Odometer/Trip meter Odom...

190 2-2. Instrument cluster Indicators and warning lights The indicator and warning lights on the instrument cluster and cen- ter panel inform the driver of the status of the vehicle’s various sys- tems. Instrument cluster Center panel (vehicles without navigation system)

191 2-2. Instrument cluster 2 Wh en drivin g Center panel (vehicles with navigation system) ■ Indicators The indicators inform the driver of the operating state of thevehicle’s various systems. Turn signal indicator ( → P. 185) (U.S.A.) Headlight indicator( → P. 203) Headlight high beam indicator ( ...

192 2-2. Instrument cluster * : These lights turn on when the engine switch is turned to the “ON” position (vehicles without smart key system) or the “ENGINE STARTSTOP” switch is turned to IGNITION ON mode (vehicles with smartkey system) to indicate that a system check is being performed.They will t...

193 2-2. Instrument cluster 2 Wh en drivin g CAUTION ■ If a safety system warning light does not come on Should a safety system light such as the ABS and SRS airbag warning lightnot come on when you start the engine, this could mean that these systemsare not available to help protect you in an accid...

194 2-2. Instrument cluster Multi-information display ∗ The multi-information display presents the driver with a variety of driving-related data, including the current outside temperature and clock. ● Outside temperature Indicates the outside tempera-ture. The temperature range thatcan be displayed ...

195 2-2. Instrument cluster 2 Wh en drivin g Trip information Push the “DISP” button to dis-play trip information. Display items can be switchedby pressing the “DISP” button. ■ Average fuel consumption after refueling Displays the average fuel consumption since the vehicle was lastrefueled. ■ Instan...

196 2-2. Instrument cluster ■ Average fuel consumption Displays the average fuel consumption since the function wasreset. This function can be reset by pressing the “DISP” button for longer thanone second when the average fuel consumption is displayed. When the function is reset, the previous five a...

197 2-2. Instrument cluster 2 Wh en drivin g ■ Setting the clock Select “CLOCK” on the menu screen. Press and hold the“DISP” button until the display changes. Press the “DISP” button to adjustthe hours. After adjusting the hours, wait 5seconds to allow the hours to beautomatically input. Press the “...

198 2-2. Instrument cluster ■ Setting the display Select “DISPLAY” on the menu screen. Press and hold the“DISP” button until the display changes. Select the desired item on themenu screen. Press and hold the “DISP” buttonto enter the setting mode. ● Setting the day mode Select “DAY MODE” on the menu...

199 2-2. Instrument cluster 2 Wh en drivin g ● Setting the brightness Select “BRIGHTNESS” on the menu screen. Press and holdthe “DISP” button until the display changes. Press the “DISP” button to adjustthe brightness. +: Brighter-: Darker After adjusting the brightness,wait 5 seconds to allow the br...

201 2-2. Instrument cluster 2 Wh en drivin g ■ Setting the contrast Select “CONTRAST” on the menu screen. Press and hold the“DISP” button until the display changes. Press the “DISP” button to adjustthe contrast. +: Strengthen-: Weaken After adjusting the contrast, wait 5seconds to allow the contrast...

202 2-2. Instrument cluster ■ Returning to the previous screen Select “RETURN” on the menu screen. Press and hold the “DISP”button until the display changes. ■ System check display Vehicles without smart key systemAfter the engine switch is turned to the “ON” position, “SYSTEM CHECK”is displayed whi...

203 2 Wh en drivin g 2-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. Type A The side marker, park-ing, tail, license plateand instrument panellights turn on. The headlights and alllights listed above turnon. The headlights andparking li...

205 2-3. Operating the lights and wipers 2 Wh en drivin g Turning on the high beam headlights With the headlights on, pushthe lever forward to turn on thehigh beams. Pull the lever back to the centerposition to turn the high beamsoff. Pull the lever toward you toturn on the high beams. Release the l...

206 2-3. Operating the lights and wipers ■ Automatic light off system Vehicles without smart key system The headlights and tail lights turn off 30 seconds after drivers door is openedand closed if the engine switch has been turned to the “ACC” or “LOCK”position.To turn the lights on again, turn the ...

207 2-3. Operating the lights and wipers 2 Wh en drivin g Fog light switch ∗ The fog lights improve visibility in difficult driving conditions, such as in rain or fog. They can be turned on only when the headlights are on in low beam. Off Front fog lights on ∗ : If equipped

208 2-3. Operating the lights and wipers Windshield wipers and washer Wiper intervals can be adjusted for intermittent operation. Intermittent windshieldwiper operation Low speed windshield wiperoperation High speed windshieldwiper operation Temporary operation Increases the intermittentwindshield w...

209 2-3. Operating the lights and wipers 2 Wh en drivin g ■ The windshield wipers and washer can be operated when Vehicles without smart key system The engine switch is in the “ON” position. Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. ■ If no windshield wash...

210 2-3. Operating the lights and wipers Rear window wiper and washer ■ The rear window wiper and washer can be operated when Vehicles without smart key system The engine switch is in the “ON” position. Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. NOTICE ■ Wh...

211 2 Wh en drivin g 2-4. Using other driving systems Cruise control ∗ Use cruise control to maintain a set speed without using the acceler- ator. Indicator Cruise control switch ■ Set the vehicle speed Turn the “ON-OFF” button on. Press the button once more todeactivate the cruise control. Accelera...

212 2-4. Using other driving systems ■ Cruise control can be set when ● 2.7 L 4-cylinder (1AR-FE) engine: The shift lever is in D, 4, 5 or 6 rangeof S. ● 3.5 L V6 (2GR-FE) engine: The shift lever is in D, 4 or 5 range of S. ● Vehicle speed is above approximately 25 mph (40 km/h). Within the limitsof...

213 2-4. Using other driving systems 2 Wh en drivin g ■ Automatic cruise control cancellation The set speed is automatically cancelled in any of the following situations. ● Actual vehicle speed falls more than 10 mph (16 km/h) below the presetvehicle speed.At this time, the memorized set speed is no...

214 2-4. Using other driving systems Rear view monitor system (vehicles with multi-information display) Vehicles with navigation system Refer to the “Navigation System Owner's Manual”. Vehicles without navigation system The rear view monitor system assists the driver by displaying an image of the ar...

215 2-4. Using other driving systems 2 Wh en drivin g ■ Displayed area ■ Rear view monitor system camera The area covered by the camera is lim-ited. Objects that are close to eithercorner of the bumper or under thebumper cannot be seen on the screen. The area displayed on the screen mayvary accordin...

216 2-4. Using other driving systems ■ Smear effect ■ Setting the rear view monitor system display → P. 200 If a bright light, such as sunlightreflected off the vehicle body, is pickedup by the camera, a smear effect* char-acteristic to the camera may occur. *: Smear effect : A phenomenon that occur...

217 2-4. Using other driving systems 2 Wh en drivin g CAUTION ■ When using the rear view monitor system, observe the following pre-cautions to avoid an accident that could result in death or serious inju-ries. ● Never depend solely on the monitor system when reversing. ● Always check visually and wi...

218 2-4. Using other driving systems Driving assist systems To help enhance driving safety and performance, the following sys- tems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when ...

219 2-4. Using other driving systems 2 Wh en drivin g When the Enhanced VSC/TRAC systems are operating If the vehicle is in danger of slip-ping, rolling backwards whenstarting on an incline, or the frontwheels (2WD models) or fourwheels (4WD models) spin, theindicator flashes to indicate thatthe Enh...

220 2-4. Using other driving systems ■ Turning off TRAC and Enhanced VSC Push and hold the button whilethe vehicle is stopped to turn offTRAC and Enhanced VSC. The “TRAC OFF” and EnhancedVSC off indicator light shouldcome on. Push the button again to turn thesystem back on. ■ Automatic reactivation ...

221 2-4. Using other driving systems 2 Wh en drivin g ■ EPS operation sound When the steering wheel operates, a motor sound (whirring sound) may beheard. This does not indicate a malfunction. ■ Reduced effectiveness of EPS The effectiveness of EPS is reduced to prevent the system from overheatingwhe...

222 2-4. Using other driving systems CAUTION ■ TRAC may not operate effectively when Directional control and power may not be achievable while driving on slip-pery road surfaces even if the TRAC system is operating.Do not drive the vehicle in conditions where stability and power may be lost. ■ When ...

223 2-4. Using other driving systems 2 Wh en drivin g Hill-start assist control ■ Hill-start assist control operating conditions The system operates in the following situations: • The shift lever is in a position other than P.• The parking brake is not applied.• The accelerator pedal is not depresse...

224 2-4. Using other driving systems ■ Hill-start assist control buzzer ● When hill-start assist control is activated, the buzzer will sound once. ● In the following situations, hill-start assist control will be canceled and thebuzzer will sound twice. • No attempt is made to drive the vehicle withi...

225 2-4. Using other driving systems 2 Wh en drivin g Downhill assist control system (4WD models only) While the downhill assist control system is operating The slip indicator will flash toindicate that the downhill assistcontrol system is operating, andthe stop lights and high mountedstoplight will...

228 2-5. Driving information Off-road precautions Off-road vehicle feature ● Specific design characteristics give it a higher center of gravitythan ordinary passenger cars. This vehicle design feature causesthis type of vehicle to be more likely to rollover. And, utility vehicleshave a significantly...

229 2-5. Driving information 2 Wh en drivin g CAUTION ■ Off-road vehicle precautions Always observe the following precautions to minimize the risk of serious per-sonal injury or damage to your vehicle: ● In a rollover crash, an unbelted person is significantly more likely to diethan a person wearing...

230 2-5. Driving information Off-road driving When driving your vehicle off-road, please observe the following pre-cautions to ensure your driving enjoyment and to help prevent theclosure of areas to off-road vehicles. ● Drive your vehicle only in areas where off-road vehicles are permit-ted to trav...

231 2-5. Driving information 2 Wh en drivin g CAUTION ■ Off-road driving precautions Always observe the following precautions to minimize the risk of serious per-sonal injury or damage to your vehicle: ● Drive carefully when off the road. Do not take unnecessary risks by drivingin dangerous places. ...

232 2-5. Driving information NOTICE ■ When you drive through water If driving through water, such as when crossing shallow streams, first checkthe depth of the water and the bottom of the river bed for firmness. Driveslowly and avoid deep water. ■ Inspection after off-road driving ● Sand and mud tha...

233 2-5. Driving information 2 Wh en drivin g Cargo and luggage Capacity and distribution Cargo capacity depends on the total weight of the occupants. (Cargo capacity) = (Total load capacity) - (Total weight of occupants) Steps for Determining Correct Load Limit ⎯ (1) Locate the statement “The combi...

234 2-5. Driving information (6) If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine howthis reduces the available cargo and luggage load capacity of yourvehicle. Example on your vehicle Cargo capacity Total load capa...

235 2-5. Driving information 2 Wh en drivin g CAUTION ■ Things that must not be carried in the luggage compartment The following things may cause a fire if loaded in the luggage compart-ment. ● Receptacles containing gasoline ● Aerosol cans ■ Storage precautions Observe the following precautions.Fai...

236 2-5. Driving information CAUTION ■ Roof luggage carrier precautions To use the roof rails as a roof luggage carrier, you must fit the roof railswith two or more genuine Toyota cross rails or their equivalent. When you load cargo on the roof luggage carrier, observe the following: ● Before drivin...

237 2-5. Driving information 2 Wh en drivin g Vehicle load limits ■ Total load capacity and seating capacity These details are also described on the tire and loading informationlabel. ( → P. 463) CAUTION ■ Overloading the vehicle Do not overload the vehicle.It may not only cause damage to the tires,...

238 2-5. Driving information Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropri- ate to the prevailing weather conditions. ■ Pre-winter preparations ● Use fluids that are appropriate to the prev...

239 2-5. Driving information 2 Wh en drivin g Selecting tire chains Use the correct tire chain size when mounting the snow chains. Chain size is regulated for each tire size. Side chain 0.12 in. (3 mm) in diameter 0.39 in. (10 mm) in width 1.18 in. (30 mm) in length Cross chain 0.16 in. (4 mm) in di...

240 2-5. Driving information ■ Tire chains Observe the following precautions when installing and removing chains. ● Install and remove tire chains in a safe location. ● Install tire chains on the front tires. ● Install tire chains following the instructions provided in the accompanyingmanual. CAUTIO...

241 2-5. Driving information 2 Wh en drivin g NOTICE ■ Repairing or replacing snow tires Request repairs of and obtain replacement snow tires from Toyota dealers orlegitimate tire retailers.This is because the removal and attachment of snow tires affects the opera-tion of the tire pressure warning v...

242 2-5. Driving information Trailer towing Your vehicle is designed primarily as a passenger carrying vehicle. Towing a trailer will have an adverse effect on handling, perfor- mance, braking, durability, and fuel consumption. For your safety and the safety of others, do not overload the vehicle or...

243 2-5. Driving information 2 Wh en drivin g Weight limits Confirm that the gross trailer weight, gross vehicle weight, gross axleweight and trailer tongue load are all within the limits. lb. (kg) ● The gross trailer weight must never exceed towing capacitydescribed in the table above. ● The gross ...

244 2-5. Driving information Towing related term Towing related term Meaning GVWR (Gross Vehicle Weight Rating) The maximum allowable gross vehicle weight. The gross vehicle weight is the total weight of the vehicle. When towing a trailer, it is the sum of the vehicle weight (including the occupants...

245 2-5. Driving information 2 Wh en drivin g Trailer tongue load ● A recommended tongue load varies in accordance with the typesof trailers or towing as described below. ● In order to ensure the recommended values shown below, thetrailer must be loaded by referring to the following instructions.The...

246 2-5. Driving information Hitch Trailer hitch assemblies have different weight capacities establishedby the hitch manufacturer. Even though the vehicle may be rated fortowing a higher weight, the operator must never exceed the maxi-mum weight rating specified for the trailer hitch. Trailer towing...

249 2-5. Driving information 2 Wh en drivin g ■ Before towing Check that the following conditions are met: ● The vehicle's tires are properly inflated. ( → P. 562) ● Trailer tires are inflated according to the trailer manufacturer's recom-mendation. ● All trailer lights work. ● All lights work each ...

250 2-5. Driving information CAUTION ■ Trailer towing precautions ● Follow all the instructions described in this section. Failure to do so couldcause an accident resulting in death or serious injury. ● Exceeding the towing capacity, GVWR or GAWR can cause an accidentresulting in death or serious pe...

251 2-5. Driving information 2 Wh en drivin g CAUTION ● Lubricate the hitch ball with a light coat of grease. ● Remove the trailer hitch whenever you are not towing a trailer. Afterremoving the hitch, seal any mounting hole in the vehicle body to prevententry of any substances into the vehicle. ■ Wh...

252 2-5. Driving information Dinghy towing NOTICE ■ To avoid serious damage to your vehicle Do not tow your vehicle with 4 wheels on the ground. Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home.

256 3-1. Using the air conditioning system and defogger Front manual air conditioning system ∗ Adjusting the settings ■ Adjusting the temperature setting Turn the temperature control dial clockwise (warm) or counter-clockwise (cool). If is not pressed, the system will blow ambient temperature air or...

257 3-1. Using the air conditioning system and defogger 3 Inte rior fe atures ■ Adjusting the fan speed Turn the fan speed control dial clockwise (increase) or counter-clockwise (decrease). Turn the dial to “OFF” to turn the fan off. ■ Changing the air outlets Set the air outlet selection dial to an...

259 3-1. Using the air conditioning system and defogger 3 Inte rior fe atures ■ Switching between outside air and recirculated air modes Press . The mode switches between outside air mode (indicator off) and recircu- lated air mode (indicator on) modes each time is pressed. Defogging the windshield ...

260 3-1. Using the air conditioning system and defogger Adjusting the position of and opening and closing the air outlets Front center outlets Direct air flow to the left or right,up or down. Front side outlets Direct air flow to the left orright, up or down. Turn the knob to open or closethe vent. ...

262 3-1. Using the air conditioning system and defogger CAUTION ■ To prevent the windshield from fogging up Do not set the air outlet selection dial to during cool air operation in extremely humid weather. The difference between the temperature of theoutside air and that of the windshield can cause ...

263 3-1. Using the air conditioning system and defogger 3 Inte rior fe atures Front automatic air conditioning system ∗ Airflow and outlets are automatically adjusted according to the tem- perature setting. Control panel Vehicles with rear air conditioning systemVehicles without rear air conditionin...

264 3-1. Using the air conditioning system and defogger Using the automatic mode Press . The air conditioning system begins to operate. Air outletsand fan speed are automatically adjusted according to thetemperature setting. “AUTO” will be displayed on the multi-information display. Turn the tempera...

265 3-1. Using the air conditioning system and defogger 3 Inte rior fe atures Adjusting the settings ■ Adjusting the temperature setting Turn the temperature control dial clockwise (warm) or counter-clockwise (cool). The air conditioning system switches between individual andsimultaneous modes each ...

266 3-1. Using the air conditioning system and defogger ■ Changing the air outlets Press . The air outlets switch each time either side of is pressed. The air flow shown on the display indicates the following. Upper body : Vehicles without rear air conditioning system Upper body and feet : Vehicles ...

267 3-1. Using the air conditioning system and defogger 3 Inte rior fe atures Without rear air conditioning system Feet and windshield With rear air conditioning system Feet and windshield ■ Switching between outside air and recirculated air modes Press . The mode switches between outside air mode (...

268 3-1. Using the air conditioning system and defogger Changing the rear seat settings (if equipped) ■ Adjusting the temperature setting Press “ ∧ ” on to increase the temperature and “ ∨ ” to decrease the temperature. The air conditioning system switches between individual andsimultaneous modes ea...

269 3-1. Using the air conditioning system and defogger 3 Inte rior fe atures Front side outlets Direct air flow to the left orright, up or down. Turn the knob to open or closethe vent. Rear center outlets (vehicles without rear air conditioning system) Direct air flow to the left orright, up or dow...

270 3-1. Using the air conditioning system and defogger ■ Window defogger feature Recirculated air mode may automatically switch to (outside air) mode in situations where the windows need to be defogged. ■ When outside temperature approaches 32 ° F (0 ° C) The air conditioning system may not operate...

271 3-1. Using the air conditioning system and defogger 3 Inte rior fe atures Rear manual air conditioning system ∗ Airflow and outlets are automatically adjusted according to the tem- perature setting. Temperature control dial Changes the air outlets used Fan speed control dial ∗ : If equipped

272 3-1. Using the air conditioning system and defogger Adjusting the settings ■ Adjusting the temperature setting Turn the temperature control dial clockwise (warm) or counter-clockwise (cool). ■ Changing the air outlets Press the desired , or . Air flows as shown below according to the mode select...

273 3-1. Using the air conditioning system and defogger 3 Inte rior fe atures Feet ■ Adjusting the fan speed Turn the fan speed control dial clockwise (increase) or counter-clockwise (decrease). Adjusting the position of and opening and closing the roof side air outlets Direct air flow to the left o...

274 3-1. Using the air conditioning system and defogger Rear automatic air conditioning system ∗ Using the automatic mode Press . The air conditioning system will operate, and air outletsand fan speed will be set automatically. “AUTO” will be displayed on the control panel. Turn the temperature cont...

275 3-1. Using the air conditioning system and defogger 3 Inte rior fe atures Adjusting the settings ■ Adjusting the temperature setting Turn the temperature control dial clockwise (warm) or counter-clockwise (cool). ■ Changing the air outlets Press . The air outlets change as follows each time is p...

277 3-1. Using the air conditioning system and defogger 3 Inte rior fe atures Rear window and outside rear view mirror defoggers Clear the rear window using the defogger. Vehicles with manual air conditioning system On/off Press the button to turn on therear window defogger. Theindicator light will ...

278 3-1. Using the air conditioning system and defogger ■ The defogger can be operated when Vehicles without smart key system The engine switch is in the “ON” position. Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. ■ Outside rear view mirror defoggers (vehicle...

279 3-1. Using the air conditioning system and defogger 3 Inte rior fe atures Windshield wiper de-icer ∗ ■ The de-icer can be operated when Vehicles without smart key system The engine switch is in the “ON” position. Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mod...

280 3-1. Using the air conditioning system and defogger Using the steering wheel climate remote control switches ∗ Using the automatic mode Press . The air conditioning system will operate, and air outletsand fan speed will be set automatically. “AUTO” will be displayed on the multi-information disp...

281 3 Inte rior fe atures 3-2. Using the audio system Audio system With navigation system Owners of models equipped with a navigation system should referto the “Navigation System Owner's Manual”. Without navigation system Type A: CD player and AM/FM radio (with CD changer controller) Type B: CD play...

282 3-2. Using the audio system ■ Using cellular phones Interference may be heard through the audio system's speakers if a cellularphone is being used inside or close to the vehicle while the audio system isoperating. Type C: CD player with changer and AM/FM radio Title Page Using the radio P. 284 U...

283 3-2. Using the audio system 3 Inte rior fe atures CAUTION ■ For vehicles sold in U.S.A. and Canada ● Part 15 of the FCC Rules FCC Warning:Any unauthorized changes or modifications to this equipment will void theuser’s authority to operate this device. ● Laser products • Do not take this unit apa...

284 3-2. Using the audio system Using the radio Setting station presets (excluding XM ® Satellite Radio) Search for desired stations by turning the or pressing “ ∧ ” or “ ∨ ” on . Press and hold the button (from to ) the station is to be set to until you hear a beep. Scanning radio stations (excludi...

286 3-2. Using the audio system ● Scanning preset channels Press and hold until you hear a beep. When the desired channel is reached, press again. ■ Displaying text information Press . The display will show up to 10 characters. The display changes as follows each time the button is pressed. ● CH NAM...

287 3-2. Using the audio system 3 Inte rior fe atures ■ When the battery is disconnected Stations presets are erased. ■ Reception sensitivity ● Maintaining perfect radio reception at all times is difficult due to the con-tinually changing position of the antenna, differences in signal strengthand su...

288 3-2. Using the audio system ■ If the satellite radio does not operate normally (type B and C) If a problem occurs with the XM ® tuner, a message will appear on the dis- play. Refer to the table below to identify the problem, and take the suggestedcorrective action. ANTENNA The XM ® antenna is no...

289 3-2. Using the audio system 3 Inte rior fe atures Contact the XM ® Listener Care Center at 1-800-967-2346 (U.S.A.) or 1-877- 438-9677 (Canada). ■ Certifications for the radio tuner This equipment has been tested and found to comply with the limits for aclass B digital device, pursuant to Part 15...

290 3-2. Using the audio system Using the CD player Loading CDs ■ Loading a CD Type A Insert a CD. Type B and C Press . “WAIT” is shown on the display. Insert a CD when the indicator on the slot turns from amberto green. The display changes from “WAIT” to “LOAD”. Volume Random playback Track selecti...

291 3-2. Using the audio system 3 Inte rior fe atures ■ Loading multiple CDs (type B and C) Press and hold until you hear a beep. “WAIT” is shown on the display. Insert a CD when the indicator on the slot turns from amber togreen. The display changes from “WAIT” to “LOAD”. The indicator on the slot ...

293 3-2. Using the audio system 3 Inte rior fe atures Random playback ■ Current CD Press (RAND). Tracks are played in a random order until is pressed once more. ■ All CDs (with a CD changer) Press and hold until you hear a beep. Tracks on all loaded CDs are played in a random order until (RAND) is p...

295 3-2. Using the audio system 3 Inte rior fe atures NOTICE ■ CDs and adapters that cannot be used Do not use the following types of CDs, 3 in. (8 cm) CD adapters or DualDisc.Doing so may damage the CD player and/or the CD insert/eject function. ● CDs that have a diameter that is not 4.7in. (12 cm)...

296 3-2. Using the audio system NOTICE ■ CD player precautions Failure to follow the precautions below may result in serious damage to theCDs or the player itself. ● Do not insert anything other than CDs into the CD slot. ● Do not apply oil to the CD player. ● Store CDs away from direct sunlight. ● ...

297 3-2. Using the audio system 3 Inte rior fe atures Playing back MP3 and WMA discs Loading and ejecting MP3 and WMA discs → P. 290 Selecting a CD (with a CD changer) → P. 292 Volume Random playback File selection Repeat play Playback Power CD eject Displaying text message CD selection (with a CD c...

300 3-2. Using the audio system ■ Display → P. 294 ■ Canceling random and repeat playback → P. 294 ■ Error messages “ERROR”: This indicates a trouble either in the CD or inside the player.The CD may be dirty, damaged or inserted up-side down. “NO MUSIC”: This indicates that the MP3/WMA file is not i...

301 3-2. Using the audio system 3 Inte rior fe atures ■ MP3 and WMA files MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by usingMP3 compression. WMA (Windows Media TM Audio) is a Microsoft audio compression format...

304 3-2. Using the audio system Optimal use of the audio system Displays the current mode Changes the following set-ting ● Sound quality and vol-ume balance ( → P. 305) The sound quality and bal-ance setting can bechanged to produce thebest sound. ● Automatic Sound Level-izer on/off ( → P. 306) ● Re...

305 3-2. Using the audio system 3 Inte rior fe atures Using the audio control function ■ Changing sound quality modes Pressing selects the mode to be changed in the following order. “BAS” → “MID”* 1 → “TRE” → “FAD” → “BAL” → “ASL” → “RSE”* 2 * 1 : Type C only * 2 : Vehicles with rear seat entertainm...

307 3-2. Using the audio system 3 Inte rior fe atures Using the AUX adapter This adapter can be used to connect a portable audio device and lis- ten to it through the vehicle’s speakers. Open the cover and connect the portable audio device. Press . STEP 1 Vehicles without seat heater Vehicles with s...

309 3-2. Using the audio system 3 Inte rior fe atures Using the steering wheel audio switches ∗ Turning on the power Press when the audio system is turned off. The audio system can be turned off by holding down until you hear a beep. Changing the audio source Press when the audio system is turned on...

310 3-2. Using the audio system Adjusting the volume Press “+” on to increase the volume and “-” to decrease the volume. Press and hold to continue increasing or decreasing the volume. Selecting a radio station Press to select radio mode. Press “ ∧ ” or “ ∨ ” on to select a preset station. To scan f...

311 3 Inte rior fe atures 3-3. Using the rear audio system Rear seat entertainment system features ∗ The rear seat entertainment system is designed for the rear passen- gers to enjoy audio and DVD video separately from the front audio system. Front audio system Power outlet main switch Display Headp...

312 3-3. Using the rear audio system Opening and closing the display Press the lock release button toopen the display. Pull the display down to an easilyviewable angle (between 90 ° and 125 ° ). To close the display, push thedisplay up until a click is heard. The illumination of the screen isautomat...

313 3-3. Using the rear audio system 3 Inte rior fe atures Ejecting a disc Press and remove the disc. Headphone jacks To use the headphones, con-nect them to the jack. To adjust the volume Right side dial: Turn it towardthe front of the vehicle toincrease the volume. Turn ittoward the rear of the ve...

315 3-3. Using the rear audio system 3 Inte rior fe atures ■ Before using the remote controller (for new vehicle owners) ■ When the remote controller battery is fully depleted ■ If the remote controller batteries are discharged The following symptoms may occur. ● The rear seat entertainment system c...

316 3-3. Using the rear audio system ■ Headphones With some headphones generally available in the market, it may be difficultto catch signals properly. Toyota recommends the use of Toyota genuinewireless headphones. Please contact your Toyota dealer for further details. ■ Volume ● Adjust the volume ...

317 3-3. Using the rear audio system 3 Inte rior fe atures NOTICE ■ For normal operation after replacing the battery Observe the following precautions to prevent accidents. ● Always work with dry hands.Moisture may cause the battery to rust. ● Do not touch or move any other components inside the rem...

318 3-3. Using the rear audio system Using the DVD player (DVD video) ■ Remote controller Turning on the DVD mode Turning on or off the opera-tion switches (icon) on thedisplay Selecting a chapter Reversing a disc Turning on the menu screen Turning on the title selectionscreen Searching the title Ch...

319 3-3. Using the rear audio system 3 Inte rior fe atures ■ Unit Turning on the DVD mode Skipping to the desiredchapter Playing/pausing a disc Turning on or off the opera-tion switches (icon) on thedisplay Selecting a switch (icon) Inputting the selectedswitch (icon) ■ Display (page 1) Turning off ...

320 3-3. Using the rear audio system ■ Display (page 2) Displaying the initial settingscreen Displaying page 1 Search for a title Returning to the previousscreen Changing the audio lan-guage Changing the subtitle lan-guage Changing the angle ■ Operating from the front audio system Selecting a chapte...

321 3-3. Using the rear audio system 3 Inte rior fe atures Turning on or off the operation switches Press or to turn on the operation switches. Press or once again or select to turn off the opera- tion switches. Turning on the title selection screen Press or select to turn on the title selection scr...

323 3-3. Using the rear audio system 3 Inte rior fe atures Changing the audio language Press or select to display the audio languagescreen. Each time is pressed or is selected, another lan- guage stored on the disc isselected. Select to return to the pre- vious screen. Changing the angle Press or se...

324 3-3. Using the rear audio system ■ DVD player and DVD video discs This DVD player is compatible NTSC color TV formats. DVD video discsconforming to other formats such as PAL or SECAM cannot be used. ■ Region codes Some DVD video discs have a region code indicating where you can usethem. If the D...

325 3-3. Using the rear audio system 3 Inte rior fe atures ■ DVD video disc glossary ● DVD video discs: Digital Versatile Discs that hold world’s standard video.DVD video discs have adopted “MPEG2”, one of the world standards ofdigital compression technologies. The picture data is compressed by 1/40...

326 3-3. Using the rear audio system ■ Audio Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”,and are trademarks of Dolby © Laboratories. Confidential unpublished works.1992-1997 Dolby © Laboratories. All rights reserved. “dts” is a trademark of Digital Theater Systems, Inc.

329 3-3. Using the rear audio system 3 Inte rior fe atures Selecting a disc menu number Select to display the disc menu number search screen. Select the disc menu number, and press or to input it. Select to return to the previous screen. ■ Operating from the front audio system Selecting a chapter Th...

330 3-3. Using the rear audio system Using the DVD player (audio CD/CD text) ■ Canceling random, repeat and scan play Select , or again. Using the control screen,press or to display the control screen. Repeat play Random playback Search playback ■ Operating from the front audio system Selecting a tr...

331 3-3. Using the rear audio system 3 Inte rior fe atures Using the DVD player (MP3 discs) ■ Using the control screen Press or to dis- play the control screen. Repeat play Random playback Search playback Displaying file information Selecting a folder ■ Operating from the front audio system Selectin...

332 3-3. Using the rear audio system Repeat play ■ Repeat a file Select . ■ Repeat all of files in a folder Select , and press and hold or . Random playback ■ Playing files from a particular folder in random order Select . ■ Playing all of the files on a disc in random order Select , and press and h...

333 3-3. Using the rear audio system 3 Inte rior fe atures Using the video mode Using the adapter Open the cover. The A/V input adapter is com-posed of 3 input adapters. Yellow: Image input adapter White: Left channel audio inputadapter Red: Right channel audio inputadapter Press or to select the vi...

334 3-3. Using the rear audio system NOTICE ■ When the A/V input adapter is not in use Keep the A/V input adapter cover closed. Inserting anything other than an appropriate plug may cause electrical fail-ure or short circuit.

335 3-3. Using the rear audio system 3 Inte rior fe atures Changing the initial setting Changing the audio language Select “Audio Language”. Select the language you want to hear, and press or to input it. Select “Others” if you cannot findthe language you want to hear.Enter the appropriate 4-digit l...

336 3-3. Using the rear audio system Changing the subtitle language Select “Subtitle Language”. Select the language you want to read, and press or to input it. Select “Others” if you cannot findthe language you want to read.Enter the appropriate 4-digit lan-guage code. ( → P. 339) Select a number, a...

337 3-3. Using the rear audio system 3 Inte rior fe atures Changing the DVD language Select “DVD Language”. Select the language you want to read, and press or to input it. Select “Others” if you cannot findthe language you want to read.Enter the appropriate 4-digit lan-guage code. ( → P. 339) Select...

338 3-3. Using the rear audio system Setting viewer restriction levels Setting a password allows theviewer restriction to be effective. Select “Parental Lock”.Enter the password and press or . The setting cannot be changedunless the password is entered. When you forget the password,initialize the pa...

341 3-3. Using the rear audio system 3 Inte rior fe atures ■ Adjusting the screen Code Language 1914 Shona 1915 Somali 1917 Albanian 1918 Serbian 1919 Siswati 1920 Sesotho 1921 Sundanese 1923 Swahili 2001 Tamil 2005 Telugu 2007 Tajik 2008 Thai 2009 Tigrinya 2011 Turkmen 2012 Tagalog 2014 Setswana 20...

342 3-4. Using the hands-free phone system (for cellular phone) Hands-free phone system (for cellular phone) features ∗ ■ When using the hands-free system ● The audio system and voice guidance are muted when making a call. ● If both parties speak at the same time it may be difficult to hear. ● If th...

344 3-4. Using the hands-free phone system (for cellular phone) ■ Certification for the hands-free phone system FCC ID: HYQBTAU01A IC ID: 1551A-BTAU01A MADE IN JAPAN This device complies with Part 15 of the FCC Rules and RSS-210. Opera-tion is subject to the following two conditions: (1) This device...

345 3-4. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures FCC WARNING:Changes or modifications not expressly approved by the party responsiblefor compliance could void the user's authority to operate the equipment. CAUTION: Radio Frequency Radiation Exposure This equipmen...

346 3-4. Using the hands-free phone system (for cellular phone) Using the hands-free phone system ∗ ■ Audio unit Displays such items asmessages, names, andphone numbers Lower-case characters andspecial characters, such asan umlaut, cannot be dis-played. Push and hold: Displaysinformation that is too...

347 3-4. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures ■ Steering wheel telephone switches Volume The voice guidance volumecannot be adjusted by usingthis switch. Hands-free phone systemoff/ends a call/refuses a call Hands-free phone systemon/starts a call Press: Voice...

348 3-4. Using the hands-free phone system (for cellular phone) Operating the system by using a voice command By following voice guidance instructions output from the speaker,voice commands can be given to allow for operation of the hands- free phone system without checking the display or operating ...

349 3-4. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures Using the hands-free phone system for the first time Before using the hands-free phone system, it is necessary to registera cellular phone in the system. The phone registration mode will beentered automatically whe...

351 3-4. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures ■ Using a short cut key Setup Security Set PIN Setting a PIN code Phonebook Lock Locking the phone book Phonebook Unlock Unlocking the phone book Phone Setup Pair Phone Registering a cellular phone to be used Chang...

353 3-4. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures Making a phone call Dialing by inputting a number Press and say “Dial by number”. Press and say the phone number. ■ Making a phone call ● Dialing by inputting a number“Dial by number” ● Dialing by inputting a name“...

355 3-4. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures When receiving a phone call ■ Answering the phone Press . ■ Refusing the call Press . Transferring a call A call can be transferred between the cellular phone and systemwhile dialing, receiving a call, or during a ...

356 3-4. Using the hands-free phone system (for cellular phone) Select the number by either of the following methods: a. Say “Previous” or “Go back” until the desired number is dis- played. b. Select the desired number by using . The following operations can be performed: Dialing: Press or select “D...

357 3-4. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures Setting a cellular phone Registering a cellular phone Select “Pair Phone” by using a voice command or , and do the procedure for registering a cellular phone. ( → P. 349) Registering a cellular phone in the hands-f...

359 3-4. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures Press or select “Record Name” by using , and say a new name. Select “Confirm” by using a voice command or . Listing the registered cellular phones Selecting “List Phones” by using a voice command or begins reading ...

361 3-4. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures Pattern B Select a 4 to 8-digit number by using . The number should be input 1 digit at a time. When the entire number to be registered as a passkey has been input, press once again. ■ The number of cellular phones...

362 3-4. Using the hands-free phone system (for cellular phone) Security and system setup Setting or changing the PIN ■ Setting a PIN Select “Set PIN” by using a voice command or . Enter a PIN by using a voice command or . When using , input the code 1 digit at a time. ■ Changing the PIN Select “Set...

363 3-4. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures Enter the registered PIN by using a voice command or . Enter a new PIN by using a voice command or . When using , input the code 1 digit at a time. Locking or unlocking the phone book Select “Phonebook lock (Phbk L...

364 3-4. Using the hands-free phone system (for cellular phone) Initialization Select “Initialize” and then “Confirm” by using . Select “Confirm” by using again. ■ Initialization ● The following data in the system can be initialized: • Phone book• Outgoing and incoming history• Speed dial• Registere...

365 3-4. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures Using the phone book Adding a new phone number The following methods can be used to add a new phone number: ● Inputting a phone number by using a voice command ● Transferring data from the cellular phone ● Inputtin...

368 3-4. Using the hands-free phone system (for cellular phone) Select the name to be registered by either of the followingmethods, and select “Confirm” by using a voice command or : a. Press and say the desired name. b. Select “Record Name” by using , and say the desired name. Select “Confirm” by u...

369 3-4. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures Select the desired preset button, and register the data intospeed dial by either of the following methods: a. Press the desired preset button, and select “Confirm” by using a voice command or . b. Press and hold th...

371 3-4. Using the hands-free phone system (for cellular phone) 3 Inte rior fe atures Listing the registered data Selecting “List names” by using a voice command begins reading thelist of the registered data. When listing is complete, the system returns to “Phonebook”. Pressing while a data is being...

372 3-5. Using the interior lights Interior lights list Your Toyota is equipped with the illuminated entry system to assist in entering the vehicle. Owing to the function of the system, the lights shown in the following illustration automatically turn on/off according to the presence of the electron...

373 3-5. Using the interior lights 3 Inte rior fe atures Personal/interior light main switch “OFF” The personal/interior lights andinterior light can be individuallyturned on or off. Door position The personal/interior lights andinterior light come on when a dooror the glass hatch (if equipped) isop...

374 3-5. Using the interior lights Center (if equipped) On/off The illuminated entry system isactivated even if the light isturned off when the personal/inte-rior light main switch is in doorposition. Interior light Off On The illuminated entry system isactivated even if the light isturned off when ...

375 3 Inte rior fe atures 3-6. Using the storage features List of storage features Auxiliary boxes Overhead console Glove box Bottle holders Cup holders Side table Console box Auxiliary box & cup holder

376 3-6. Using the storage features Glove box Unlock with the master key(vehicles without smart keysystem) or mechanical key(vehicles with smart key sys-tem) Lock with the master key(vehicles without smart keysystem) or mechanical key(vehicles with smart key sys-tem) Open (pull lever) ■ Power back d...

377 3-6. Using the storage features 3 Inte rior fe atures Console box Upper Pull up the knob to release thelock. Lift the lid. Lower Push down the lever. CAUTION ■ Caution while driving Keep the console box closed.Injuries may result in the event of an accident or sudden braking. Console box

378 3-6. Using the storage features Overhead console The overhead console is useful for temporarily storing sunglassesand similar small items. Press in the lid. CAUTION ■ Items that should not be left in the overhead console Do not leave glasses or lighters in the console.If the interior of the vehi...

380 3-6. Using the storage features Side table Install the side table before usingthe cup holder. ( → P. 386) Removing the adapters changesthe size. ( → P. 381) Rear (vehicles without third seat) Rear (vehicles with third seat) Removing the adapters changesthe size. ( → P. 381) Cup holders

382 3-6. Using the storage features CAUTION ■ Items unsuitable for the cup holder Do not place anything other than cups or aluminum cans in the cup holders.Other items may be thrown out of the holders in the event of an accident orsudden braking and cause injury. If possible, cover hot drinks to pre...

383 3-6. Using the storage features 3 Inte rior fe atures Bottle holders Front Rear CAUTION ■ Items unsuitable for the bottle holder Do not place anything other than a bottle in the bottle holders.Other items may be thrown out of the holders in the event of an accident orsudden braking and cause inj...

384 3-6. Using the storage features Auxiliary boxes Type A Pull up the lever. Type B Lift the lid. Remove the separator to use thebox. ( → P. 381) Type C (if equipped) Lift the lid. Auxiliary boxes

385 3-6. Using the storage features 3 Inte rior fe atures Type D Lift the lid. ■ Auxiliary box (type D) Install the side table. ( → P. 386) CAUTION ■ Caution while driving Keep the auxiliary boxes closed.Injuries may result in the event of an accident or sudden braking. Auxiliary boxes

388 3-7. Other interior features Sun visors Forward position Flip down. Side position Flip down, unhook, andswing to the side. Side extenderPlace in side position thenslide backwards.

389 3-7. Other interior features 3 Inte rior fe atures Vanity mirrors NOTICE ■ To prevent the battery from being discharged Do not leave the vanity lights on for extended periods while the engine isstopped. Slide the cover. The light turns on when thecover is opened. (vehicles withvanity mirror ligh...

390 3-7. Other interior features Clock (vehicles without multi-information display) ■ The clock is displayed when The engine switch is in the “ACC” or “ON” position. Adjusts the hours. Adjusts the minutes.

391 3-7. Other interior features 3 Inte rior fe atures Conversation mirror ■ To use the overhead console from the conversation mirror state Fully close the lid, then open it again. ( → P. 378) Press in the lid. Push the lid back up half way.

392 3-7. Other interior features Power outlets The power outlet can be used for a following component. 12 V: Accessories that run on less than 10 A.115 VAC: Accessories that use less than 100 W. ■ 12 V Type A* 1 Type B* 2

393 3-7. Other interior features 3 Inte rior fe atures Type C Type D ■ 115 VAC *3 Main switch To use the power outlet,turn on the main switch. Power outlet socket * 1 : Vehicles with seat heater * 2 : Vehicles without seat heater * 3 : Vehicles with rear entertainment system

394 3-7. Other interior features ■ The power outlet can be used when 12 V Vehicles without smart key system:The engine switch is in the “ACC” or “ON” position. Vehicles with smart key system:The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ONmode. 115 VAC Vehicles without smart key system:...

395 3-7. Other interior features 3 Inte rior fe atures NOTICE ■ To avoid damaging the power outlet Close the power outlet lid when the power outlet is not in use.Foreign objects or liquids that enter the power outlet may cause a short cir-cuit. ■ To prevent the fuse from being blown 12 V Do not use ...

396 3-7. Other interior features Seat heaters ∗ ■ The seat heaters can be used when Vehicles without smart key system The engine switch is in the “ON” position. Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. ■ When not in use Turn the knob fully counterclockwis...

397 3-7. Other interior features 3 Inte rior fe atures CAUTION ■ Burns ● Use caution when seating the following persons in a seat with the seatheater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the disabled• Persons with sensitive skin• Persons who are f...

398 3-7. Other interior features Armrests NOTICE ■ To prevent damage to the armrest Do not place too much strain on the armrest. Pull the armrest down for use.

399 3-7. Other interior features 3 Inte rior fe atures Floor mat CAUTION ■ When inserting the floor mat Observe the following precautions.Failure to do so may result in the floor mat slipping and interfering with themovement of the pedals during driving, resulting in an accident. ● Make sure the flo...

400 3-7. Other interior features Luggage compartment features ■ Cargo hooks Cargo hooks are provided forsecuring loose items. ■ Shopping bag hooks ■ Auxiliary box Lift the center deck board.

401 3-7. Other interior features 3 Inte rior fe atures ■ Separating luggage compartment The center deck board can beused to separate the luggagecompartment. Remove the center deckboard and insert it upright intothe groove. The board cannot be insertedwhen the luggage cover isstowed.

402 3-7. Other interior features ■ When taking out luggage through the glass hatch (vehicles with glass hatch) ■ Luggage cover (vehicles with luggage cover) Hang the hooks on the hookbrackets on the second seatseatback. Vehicles with the third seat:When using the luggage cover,the third seat must be...

403 3-7. Other interior features 3 Inte rior fe atures ■ Removing the luggage cover (vehicles with luggage cover) The luggage cover can be removed by following the procedure below. ■ Luggage storage box (vehicles without third seat) Detach the hooks. Push in the left side of the luggagecover while k...

404 3-7. Other interior features ■ Stowing the luggage cover (vehicles with luggage cover) CAUTION ■ When the cargo hooks are not in use To avoid injury, always return the cargo hooks to their positions when theyare not in use. ■ Caution while driving Do not drive with any of the deck boards opened....

405 3-7. Other interior features 3 Inte rior fe atures NOTICE ■ Shopping bag hook weight capacity Do not hang any object heavier than 4 lb. (2 kg) on shopping bag hooks. ■ While driving Do not drive with the luggage cover standing upright in the grooves as theluggage cover may fall down. ■ Before in...

406 3-7. Other interior features Garage door opener ∗ The garage door opener (HomeLink ® Universal Transceiver) is manufac- tured under license from HomeLink ® . Programming the HomeLink ® (for U.S.A. owners) The HomeLink ® compatible transceiver in your vehicle has 3 buttons which can be programmed...

407 3-7. Other interior features 3 Inte rior fe atures Press and hold down one of thebuttons on the HomeLink ® and the button on the transmitter.When the indicator light on theHomeLink ® changes from a slow to a rapid flash after 20 seconds,you can release both buttons. Test the operation of theHome...

409 3-7. Other interior features 3 Inte rior fe atures Test the operation of the HomeLink ® by pressing the newly programmed button. Check to see if the gate/device operatescorrectly. Repeat the steps above to program another device for each ofthe remaining HomeLink ® buttons. ■ Programming other de...

410 3-7. Other interior features ■ Before programming ● Install a new battery in the transmitter. ● The battery side of the transmitter must be pointed away from theHomeLink ® . ■ Certification for the garage door opener This device complies with Part 15 of the FCC Rules and with RSS-210 of theIC Ru...

411 3-7. Other interior features 3 Inte rior fe atures Compass ∗ The compass on the inside rear view mirror indicates the direction in which the vehicle is heading. ■ Operation To turn the compass on or off,press the switch. ■ Displays and directions Display Direction N North NE Northeast E East SE ...

412 3-7. Other interior features Calibrating the compass The direction display deviates from the true direction determined bythe earth’s magnetic field. The amount of deviation varies accordingto the geographic position of the vehicle. If you cross over a map boundary shown in illustration, the comp...

413 3-7. Other interior features 3 Inte rior fe atures ■ Circling calibration When C appears on the display,drive the vehicle at 5 mph (8 km/h)or less in a circle until a direction isdisplayed. If there is not enough space todrive in a circle, drive around theblock until the direction is dis-played....

414 3-7. Other interior features NOTICE ■ To avoid the compass malfunctions Do not place magnets or any metal objects near the inside rear view mirror. Doing this may cause a malfunction of the compass sensor. ■ To ensure normal operation of the compass ● Do not perform circling calibration of the c...

416 4-1. Maintenance and care Cleaning and protecting the vehicle exterior ■ Automatic car washes ● Before washing the vehicle, do the following. • Fold the mirrors back.• Remove the antenna. (mast type only)• Turn the power back door system off. ● Brushes used in automatic car washes may scratch th...

417 4-1. Maintenance and care 4 Mainten ance an d ca re ■ Aluminum wheels Remove any dirt immediately by using a neutral detergent. Do not use hardbrushes or abrasive cleaners. Do not use strong or harsh chemical cleaners.Use the same mild detergent and wax as used on the paint. ■ Bumpers Do not scr...

418 4-1. Maintenance and care NOTICE ■ To protect your vehicle’s painted surfaces Do not use organic cleaners such as benzene or gasoline. ■ If the windshield washer nozzle become blocked Contact your Toyota dealer. Do not try to clear it with a pin or other object.This may damage the nozzle. ■ Clea...

419 4-1. Maintenance and care 4 Mainten ance an d ca re Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle's interior and keep it in top condition: ■ Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty sur-faces wi...

420 4-1. Maintenance and care ■ Cleaning the inside of the rear window or left-side rear quarter window Do not use glass cleaner to clean the rear window or left-side rear quarterwindow, as this may cause damage to the rear window defogger heaterwires or print type antenna (if equipped). Use a cloth...

421 4-1. Maintenance and care 4 Mainten ance an d ca re NOTICE ■ Cleaning detergents Do not use organic substances such as benzene or gasoline, acidic or alka-line solutions, dye, bleach or other detergent. Doing so may discolor thevehicle interior or cause streaks or damage to painted surfaces. ■ P...

422 4-2. Maintenance Maintenance requirements ■ Repair and replacement It is recommended that genuine Toyota parts be used for repair to ensureperformance of each system. If non-Toyota parts are used in replacement orif a repair shop other than a Toyota dealer performs repairs, confirm the war-ranty...

423 4-2. Maintenance 4 Mainten ance an d ca re ■ Allow inspection and repairs to be performed by a Toyota dealer ● Toyota technicians are well-trained specialists and are kept up to datewith the latest service information. They are well informed about theoperations of all systems on your vehicle. ● ...

424 4-2. Maintenance General maintenance Engine compartment Items Check points Battery Maintenance-free. ( → P. 449) Brake fluid At the correct level? ( → P. 448) Engine coolant At the correct level? ( → P. 445) Engine oil At the correct level? ( → P. 440) Exhaust system No fumes or strange sounds? ...

425 4-2. Maintenance 4 Mainten ance an d ca re Vehicle interior Items Check points Accelerator pedal • Moves smoothly (without uneven pedal effort or catching)? Automatic transmission “Park” mechanism • Can the vehicle be held securely on an incline with the shift lever in P? Brake pedal • Moves smo...

426 4-2. Maintenance Vehicle exterior Items Check points Door • Operate smoothly? Engine hood • The lock system works properly? Fluid leaks • Is there any leakage after park- ing? Tire • Inflation pressure is correct?• Tire surfaces not worn or dam- aged? • Tires rotated according to the maintenance...

427 4-2. Maintenance 4 Mainten ance an d ca re Emission inspection and maintenance (I/M) programs Some states have vehicle emission inspection programs which include OBD (On Board Diagnostics) checks. The OBD system moni- tors the operation of the emission control system. ■ If the malfunction indica...

429 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Items Parts and tools Fuses ( → P. 475) • Fuse with same amperage rating as original Radiator and condenser ( → P. 447) ⎯ Tire inflation pressure ( → P. 463) • Tire pressure gauge• Compressed air source Washer fluid ( → P. 452) • Water wa...

430 4-3. Do-it-yourself maintenance CAUTION The engine compartment contains many mechanisms and fluids that maymove suddenly, become hot, or become electrically energized. To avoid deathor serious injury observe the following precautions. ■ When working on the engine compartment ● Keep hands, clothi...

431 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION ■ Safety glasses Wear safety glasses to prevent flying or falling material, fluid spray, etc. fromgetting in the eyes. NOTICE ■ If you remove the air cleaner filter Driving with the air cleaner filter removed may cause excessive e...

432 4-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood release lever. The hood will pop up slightly. Lift the auxiliary catch leverand lift the hood. Hold the hood open by insert-ing the supporting rod intoeither of the slots. STEP 1 ...

433 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION ■ Pre-driving check Check that the hood is fully closed and locked.If the hood is not locked properly, it may open while the vehicle is in motionand cause an accident, which may result in death or serious injury. ■ After installin...

434 4-3. Do-it-yourself maintenance Positioning a floor jack When raising your vehicle with a floor jack, position the jack cor- rectly. Improper placement may damage your vehicle or cause injury. Front Rear (2WD models) Rear (4WD models)

435 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Removing the front jack point cover (3.5 L V6 (2GR-FE) engine) Before jacking, remove the jack point cover. Turn the bolts counterclockwiseand remove them. Remove the cover. STEP 1 STEP 2

436 4-3. Do-it-yourself maintenance CAUTION ■ When raising your vehicle Make sure to observe the following to reduce the possibility of death or seri-ous injury. ● Do not use the jack that was supplied with your vehicle. ● Do not put any part of your body or get underneath the vehicle supportedonly ...

439 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Engine compartment cover ■ Removing the engine compartment cover ■ Installing the clips

440 4-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oillevel on the dipstick. ■ Checking the engine oil Park the vehicle on level ground. After turning off the engine,wait more than five minutes for the oil to drain back into thebottom of...

441 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re 3.5 L V6 (2GR-FE) engine Low Full ■ Adding engine oil If the oil level is below or nearthe low level mark, add engineoil of the same type as already inthe engine. Make sure to check the oil type and prepare the items needed beforeadding o...

443 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ How to read oil container labels Some oil containers are labeled with ILSAC certification marks thathelp you to select the proper oil. Oil identification mark The ILSAC (International Lubri-cant Standardization andApproval Committee) Ce...

444 4-3. Do-it-yourself maintenance Vehicles with smart key system Set the “ENGINE START STOP” switch OFF with the trip meter Areading shown. ( → P. 188) While pressing the trip meter reset button, set the “ENGINE STARTSTOP” switch to the IGNITION ON mode. Without multi-information display: Continue...

445 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Engine coolant The coolant level is satisfactory if it is between the “FULL” and “LOW”lines on the reservoir when the engine is cold. Reservoir cap “FULL” “LOW” If the level is on or below the“LOW” line, add coolant up to the“FULL” line.

446 4-3. Do-it-yourself maintenance ■ If the coolant level drops within a short time after replenishing Visually check the radiator, hoses, engine coolant filler cap, radiator cap,drain cock and water pump. If you cannot find a leak, have your Toyota dealer pressure test the cap andcheck for leaks i...

447 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Radiator and condenser Check the radiator and condenser, and clear any foreign objects. If either of the above parts are extremely dirty or you are not sure oftheir condition, have your vehicle checked by your Toyota dealer. CAUTION ■ Whe...

448 4-3. Do-it-yourself maintenance Brake fluid ■ Checking fluid level The brake fluid level should bebetween the “MAX” and “MIN”lines on the tank. Make sure to check the fluid type and prepare the necessary items. ■ Adding fluid Fluid type SAE J1703 or FMVSS No.116 DOT 3 Items Clean funnel ■ Brake ...

449 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Battery ■ Battery exterior Make sure that the battery terminals are not corroded and thatthere are no loose connections, cracks, or loose clamps. Terminals Hold-down clamp ■ Checking battery condition Check the battery condition using the...

450 4-3. Do-it-yourself maintenance ■ Before recharging When recharging, the battery produces hydrogen gas which is flammableand explosive. Therefore, before recharging: ● If recharging with the battery installed on the vehicle, be sure to discon-nect the ground cable. ● Make sure the power switch o...

451 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION ■ How to recharge the battery Only perform a slow charge (5 A or less). The battery may explode ifcharged at a quicker rate. ■ Emergency measures regarding electrolyte ● If electrolyte gets in your eyesFlush your eyes with clean w...

452 4-3. Do-it-yourself maintenance Washer fluid Add washer fluid in the followingsituations. ● Any washer does not work. ● The low washer fluid warninglight comes on (vehicles with-out multi-information display). ● The warning messageappears on the multi-informa-tion display (vehicles withmulti-inf...

453 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Tires Replace or rotate tires in accordance with maintenance sched- ules and treadwear. ■ Checking tires New tread Treadwear indicator Worn tread The location of treadwearindicators is shown by the“TWI” or “ ” marks, etc., molded on the s...

454 4-3. Do-it-yourself maintenance Vehicles with compact spare tire Rotate the tires in the ordershown. To equalize tire wear andextend tire life, Toyota recom-mends that tire rotation iscarried out at the same inter-val as tire inspection. ■ The tire pressure warning system Your Toyota is equipped...

455 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Installing tire pressure warning valves and transmitters When replacing tires or wheels, tire pressure warning valves andtransmitters must also be installed. When new tire pressure warning valves and transmitters areinstalled, new tire pr...

457 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Registering ID codes The tire pressure warning valve and transmitter is equipped with aunique ID code. When replacing a tire pressure warning valve andtransmitter, it is necessary to register the ID code of tire pressurewarning valve and ...

458 4-3. Do-it-yourself maintenance ■ Maximum load of tire Check that the number given by dividing the maximum load by 1.10 ofthe replacement tire is greater than 1/2 of the Gross Axle Weight Ratings(GAWR) of either the front axle or the rear axle, whichever is greater. ■ Tire types 1 Summer tires S...

459 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Initializing the tire pressure warning system Initialize the tire pressure warning system with the tire inflation pressureadjusted to the specified level. ■ If you push the tire pressure warning reset switch accidentally If initializati...

460 4-3. Do-it-yourself maintenance ■ Tire pressure warning system certification For vehicles sold in the U.S.A. This device complies with Part 15 of the FCC Rules. Operation is subjectto the following two conditions: (1) this device may not cause harmfulinterference, and (2) this device must accept...

461 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION ■ When inspecting or replacing tires Observe the following precautions to prevent accidents. Failure to do somay cause damage to parts of the drive train, as well as dangerous han-dling characteristics, which may lead to an accide...

462 4-3. Do-it-yourself maintenance NOTICE ■ Repairing or replacing tires, wheels and tire pressure warningvalves and transmitters When removing or fitting the wheels, tires or the tire pressure warningvalve and transmitter, contact your Toyota dealer as the tire pressurewarning valve and transmitte...

463 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Tire inflation pressure ■ Tire inflation pressure The recommended cold tire inflation pressure and tire size is dis-played on the tire and loading information label. ( → P. 570) Type A

464 4-3. Do-it-yourself maintenance Type B ■ Inspection and adjustment procedure Tire valve Tire pressure gauge Remove the tire valve cap. STEP 1

465 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Tire inflation pressure check interval You should check tire inflation pressure every two weeks, or at leastonce a month.Do not forget to check the spare. ■ Effects of incorrect tire inflation pressure Driving with incorrect tire inflat...

466 4-3. Do-it-yourself maintenance ● Always use a tire pressure gauge.The appearance of the tire can be misleading. In addition, tire infla-tion pressures that are even just a few pounds off can degrade rideand handling. ● Do not bleed or reduce tire inflation pressure after driving. It is normalfo...

467 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Wheels ■ When replacing wheels The wheels of your Toyota are equipped with tire pressure warningvalves and transmitters that allow the tire pressure warning system toprovide advanced warning in the event of a loss in tire inflation pressu...

468 4-3. Do-it-yourself maintenance CAUTION ■ When replacing wheels ● Do not use wheels that are a different size from those recommended inthe Owner’s Manual, as this may result in loss of handling control. ● Never use an inner tube in a leaking wheel which is designed for atubeless tire. Doing so m...

469 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. ■ Removal method Vehicles without smart key system: Turn the engine switchOFF.Vehicles with smart key system: Turn the ...

470 4-3. Do-it-yourself maintenance ■ Checking interval Inspect and replace the air conditioning filter according to the maintenanceschedule. In dusty areas or areas with heavy traffic flow, replacement maybe required. (For scheduled maintenance information, please refer to the“Scheduled Maintenance...

471 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re NOTICE ■ When using the air conditioning system Make sure that a filter is always installed. Using the air conditioning system without a filter may cause damage to thesystem.

472 4-3. Do-it-yourself maintenance Wireless remote control/electronic key battery Replace the battery with a new one if it is discharged. ■ You will need the following items: ● Flathead screwdriver (To prevent damage to the key, coverthe tip of the screwdriver with a rag.) ● Small Phillips-head scr...

473 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Replacing the battery (vehicles with smart key system) Take out the mechanical key. Remove the cover. Remove the depleted battery. Insert a new battery with the“+” terminal facing up. STEP 1 STEP 2 STEP 3

474 4-3. Do-it-yourself maintenance ■ If the electronic key battery is discharged The following symptoms may occur. ● The smart key system and wireless remote control will not function prop-erly. ● The operational range is reduced. ■ Use a CR2032 (vehicles without smart key system) or CR1632 (vehicl...

475 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. Vehicles without smart key system: Turn the engine switchOFF.Vehicles with ...

478 4-3. Do-it-yourself maintenance Fuse layout and amperage ratings ■ Engine compartment Type A (fuse block on the back of the cover) Type A (fuse block) Fuse Ampere Circuit 1 SPARE 7.5 A Spare fuse 2 SPARE 15 A Spare fuse 3 SPARE 25 A Spare fuse

482 4-3. Do-it-yourself maintenance ■ Under the instrument panel Front side of the fuse block Fuse block Fuse Ampere Circuit 1 P/SEAT 30 A Power seat 2 POWER 30 A Power windows 3 RR DOOR RH 25 A Power windows 4 RR DOOR LH 25 A Power windows 5 FR FOG 15 A Front fog lights 6 OBD 7.5 A On-board diagnos...

485 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ After a fuse is replaced ● If the lights do not turn on even after the fuse has been replaced, a bulbmay need replacement. ( → P. 486) ● If the replaced fuse blows again, have the vehicle inspected by yourToyota dealer. ■ If there is an...

486 4-3. Do-it-yourself maintenance Light bulbs You may replace the following bulbs yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs...

487 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Replacing light bulbs ■ Headlights Unplug the connector. Remove the rubber cover. ■ Rear bulb locations Back-up lights Rear turn signal lights Stop/tail and rear side marker lights License plate lights STEP 1 STEP 2

489 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Front fog lights (if equipped) Remove the fender liner bolts and clips as follows. Left side STEP 1

491 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Unplug the connector whiledepressing the lock release. ■ Parking and front side marker lights Turn the bulb base counterclock-wise. Remove the light bulb. STEP 4 STEP 1 STEP 2

492 4-3. Do-it-yourself maintenance ■ Front turn signal lights Turn the bulb base counterclock-wise. Remove the light bulb. STEP 1 STEP 2

493 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Back-up lights, stop/tail and rear side marker lights Left side Open the back door and removethe cover. To protect the cover, place a ragbetween the flathead screwdriverand cover as shown in the illus-trations. Right side Open the back ...

494 4-3. Do-it-yourself maintenance Remove the light bulb. Back-up light Rear turn signal light Stop/tail and rear side markerlight ■ License plate lights Remove the screw and removethe unit. Turn the bulb base counterclock-wise. Remove the light bulb. STEP 3 STEP 1 STEP 2 STEP 3

495 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ High mounted stoplight and outer foot lights If the high mounted stoplight or outer foot lights has burnt out, haveit replaced by your Toyota dealer. ■ Condensation build-up on the inside of the lens Contact your Toyota dealer for more ...

496 4-3. Do-it-yourself maintenance CAUTION ■ Replacing light bulbs ● Turn off the headlights. Do not attempt to replace the bulb immediatelyafter turning off the headlights.The bulbs become very hot and may cause burns. ● Do not touch the glass portion of the light bulb with bare hands. Hold thebul...

498 5-1. Essential information Emergency flashers NOTICE ■ To prevent battery discharge Do not leave the emergency flashers on longer than necessary when theengine is not running. Use the emergency flashers if the vehicle malfunctions or is involved in an accident. Vehicles without navigation system...

5 Wh en t ro uble ar ises 499 5-1. Essential information If your vehicle needs to be towed Before towing The following may indicate a problem with your transmission. Contactyour Toyota dealer before towing. ● The engine is running, but the vehicle will not move. ● The vehicle makes an abnormal sound...

500 5-1. Essential information Emergency towing If a tow truck is not available, in an emergency your vehicle may betemporarily towed using a cable or chain secured to the emergencytowing eyelet(s). This should only be attempted on hard surfacedroads for short distances at low speeds.A driver must b...

5 Wh en t ro uble ar ises 501 5-1. Essential information Installing towing eyelet Remove the eyelet cover whilepushing it. Insert the towing eyelet into thehole and tighten partially byhand. CAUTION ■ Caution while towing ● Use extreme caution when towing the vehicle. Avoid sudden starts or erratic ...

502 5-1. Essential information Tighten down the towing eyeletsecurely using a wheel nutwrench. STEP 3 ■ Location of the emergency towing eyelet → P. 522 CAUTION ■ Installing towing eyelet to the vehicle Make sure that towing eyelet is installed securely.If not securely installed, towing eyelet may c...

5 Wh en t ro uble ar ises 503 5-1. Essential information Towing with a sling-type truck Towing with a wheel lift-type truck From front (2WD models) Release the parking brake. NOTICE ■ To prevent body damage Do not tow with a sling-type truck, either from the front or rear.

504 5-1. Essential information From front (4WD models) Use a towing dolly under the rearwheels. From rear Use a towing dolly under thefront wheels. NOTICE ■ To prevent damaging the vehicle When raising the vehicle, ensure adequate ground clearance for towing atthe opposite end of the raised vehicle....

5 Wh en t ro uble ar ises 505 5-1. Essential information Using a flat bed truck If you use chains or cables to tiedown your vehicle, the anglesshaded in black must be 45 ° . Do not overly tighten the tiedowns or the vehicle may bedamaged.

506 5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. ■ Visible symptoms ● Fluid leaks under the vehicle(Water dripping from the air conditioning af...

5 Wh en t ro uble ar ises 507 5-1. Essential information Fuel pump shut off system Follow the procedure below to restart the engine after the system isactivated. Vehicles without smart key system Turn the engine switch to the “ACC” or “LOCK” position. Restart the engine. Vehicles with smart key syst...

508 5-1. Essential information Event data recorder In a crash or a near car crash event The SRS airbag sensor assembly contains the EDR. In a crash or anear car crash event, this device may record some or all of the follow-ing information: ● Engine speed ● Whether the brake pedal was depressed or no...

5 Wh en t ro uble ar ises 509 5-1. Essential information Disclosure of the data Toyota will not disclose the data recorded in an EDR to a third partyexcept when: ● An agreement from the vehicle's owner (or the leasing company fora leased vehicle) is obtained ● Officially requested by the police or o...

510 5-2. Steps to take in an emergency If a warning light turns on or a warning buzzer sounds... Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous. The following warning indicates a possible problem in the brake sys-tem. Immediately stop the vehicle in a safe place and c...

5 Wh en t ro uble ar ises 511 5-2. Steps to take in an emergency Stop the vehicle immediately. The following warnings indicate the possibility of damage to the vehi-cle that may lead to an accident. Immediately stop the vehicle in asafe place and contact your Toyota dealer. Have the vehicle inspecte...

512 5-2. Steps to take in an emergency (U.S.A.) (Canada) ABS warning light Indicates a malfunction in:• ABS; or• The brake assist system. Electric power steering warning light Indicates a malfunction in the EPS (Electric Power Steer-ing) system. ■ If the malfunction indicator lamp comes on while dri...

5 Wh en t ro uble ar ises 513 5-2. Steps to take in an emergency Follow the correction procedures. After taking the specified steps to correct the suspected problem,check that the warning light turns off. Warning light Warning light/Details Correction procedure Open door warning light (warning buzze...

5 Wh en t ro uble ar ises 515 5-2. Steps to take in an emergency *1 : Open door warning buzzer: The open door warning buzzer sounds to alert one or more of the doors isnot fully closed (with the vehicle having reached a speed of 3 mph [5 km/h]). *2 : Driver's and front passenger’s seat belt reminder...

516 5-2. Steps to take in an emergency ■ When the tire pressure warning light comes on Check the tire inflation pressure and adjust to the appropriate level.Pushing the tire pressure warning reset switch does not turn off the tirepressure warning light. ■ The tire pressure warning light may turn on ...

5 Wh en t ro uble ar ises 517 5-2. Steps to take in an emergency ■ If the tire pressure warning system is inoperative The tire pressure warning system will be disabled in the following condi-tions: (When the condition becomes normal, the system will work properly.) ● If tires not equipped with tire ...

5 Wh en t ro uble ar ises 519 5-2. Steps to take in an emergency CAUTION ■ If the tire pressure warning light comes on Be sure to observe the following precautions. Failure to do so couldcause loss of vehicle control and result in death or serious injury. ● Stop your vehicle in a safe place as soon ...

520 5-2. Steps to take in an emergency CAUTION Please note that the TPMS (tire pressure warning system) is not a sub-stitute for proper tire maintenance, and it is the driver's responsibility tomaintain correct tire pressure, even if under-inflation has not reached thelevel to trigger illumination o...

5 Wh en t ro uble ar ises 521 5-2. Steps to take in an emergency If a warning message is displayed (vehicles with multi-information display) ■ Warning buzzer A buzzer may sound when a warning message is shown on themulti-information display. ■ If the warning message is shown again after its correcti...

522 5-2. Steps to take in an emergency If you have a flat tire Remove the flat tire and replace it with the spare provided. ■ Before jacking up the vehicle ● Stop the vehicle on a hard, flat surface. ● Set the parking brake. ● Shift the shift lever to P. ● Stop the engine. ● Turn on the emergency fl...

5 Wh en t ro uble ar ises 523 5-2. Steps to take in an emergency Taking out the jack Remove the right side deckboard. Unhook the tightening strap andremove the pad. After storing the jack, makesure it is securely held by thetightening strap. Loosen Tighten STEP 1 STEP 2 STEP 3

524 5-2. Steps to take in an emergency Taking out the spare tire Open the center deck board andremove the cover. Remove the cover. If it is difficult to remove thecover, you can use the key. Attach the adapter socket (forremoving a spare tire) on thespare tire clamp bolt. STEP 1 STEP 2 STEP 3

5 Wh en t ro uble ar ises 525 5-2. Steps to take in an emergency Assemble the jack handle andtighten the screw. Connect the jack handle and theadapter socket. Turn the jackhandle. The tire will be lowered com-pletely to the ground. Pull out the spare tire and standit against the bumper. Remove the h...

526 5-2. Steps to take in an emergency Replacing a flat tire Chock the tires. Slightly loosen the wheel nuts(one turn). STEP 1 STEP 1 Flat tire Wheel chock positions Front Left-hand side Behind the rear right-hand side tire Right-hand side Behind the rear left-hand side tire Rear Left-hand side In f...

528 5-2. Steps to take in an emergency Installing the tire Remove any dirt or foreign mat-ter from the wheel contact sur-face. If foreign matter is on the wheelcontact surface, the wheel nutsmay loosen while the vehicle isin motion, and the tire maycome off the vehicle. Install the tire and loosely ...

5 Wh en t ro uble ar ises 529 5-2. Steps to take in an emergency Lower the vehicle. Firmly tighten each nut two orthree times in the order shown inthe illustration. Tightening torque: 76 ft•lbf (103 N•m, 10.5 kgf•m) Stowing the flat tire, jack and all tools Remove the center wheel orna-ment by pushi...

530 5-2. Steps to take in an emergency ■ The compact spare tire ● The compact spare tire is identified by the label “TEMPORARY USEONLY” on the tire sidewall.Use the compact spare tire temporarily only in an emergency. ● Make sure to check the tire inflation pressure of the compact sparetire. ( → P. ...

5 Wh en t ro uble ar ises 531 5-2. Steps to take in an emergency CAUTION ■ Using the tire jack Improper use of the tire jack may lead to death or serious injuries due tothe vehicle suddenly falling off the jack. ● Do not use the tire jack for any purpose other than replacing tires orinstalling and r...

532 5-2. Steps to take in an emergency CAUTION ■ Replacing a flat tire Observe the following precautions to reduce the risk of death or seriousinjury. ● Never use oil or grease on the wheel bolts or wheel nuts.Oil and grease may cause the wheel nuts to be excessively tightened,leading to bolt or dis...

5 Wh en t ro uble ar ises 533 5-2. Steps to take in an emergency CAUTION ■ When the compact spare tire is attached The vehicle speed may not be correctly detected, and the following sys-tems may not operate correctly: ● ABS & Brake assist ● Enhanced VSC ● TRAC ● Cruise control system ● Navigatio...

534 5-2. Steps to take in an emergency NOTICE ■ Do not drive the vehicle with a flat tire. Do not continue driving with a flat tire.Driving even a short distance with a flat tire can damage the tire and thewheel beyond repair. ■ Be careful when driving over bumps with the compact spare tireinstalled...

5 Wh en t ro uble ar ises 535 5-2. Steps to take in an emergency If the engine will not start If the engine still does not start after following the correct starting procedure ( → P. 173, 177) or releasing the steering lock ( → P. 175, 178), confirm the following points. ■ The engine will not start ...

536 5-2. Steps to take in an emergency Emergency start function (vehicles with smart key system) When the engine does not start, the following steps can be used asan interim measure to start the engine if the “ENGINE START STOP”switch is functioning normally. Set the parking brake. Shift the shift l...

5 Wh en t ro uble ar ises 537 5-2. Steps to take in an emergency If the shift lever cannot be shifted from P If the shift lever cannot be shifted with your foot on the brake, there may be a problem with the shift lock system (a system to prevent accidental operation of the shift lever). Have the veh...

538 5-2. Steps to take in an emergency If you lose your keys/wireless remote control transmitter ■ Keys New genuine keys can be made by your Toyota dealer. For vehicles with the smart key system, bring the other key andthe key number stamped on the key number plate. For vehicles without the smart ke...

5 Wh en t ro uble ar ises 539 5-2. Steps to take in an emergency If the electronic key does not operate properly (vehicles with smart key system) Locking and unlocking the doors, and mechanical key linked functions Using the mechanical key ( → P. 31) in order to perform the followingoperations: Lock...

5 Wh en t ro uble ar ises 541 5-2. Steps to take in an emergency If the battery is discharged The following procedures may be used to start the engine if the vehi- cle's battery is discharged. You can call your Toyota dealer or qualified repair shop. If you have a set of jumper (or booster) cables a...

5 Wh en t ro uble ar ises 543 5-2. Steps to take in an emergency ■ Starting the engine when the battery is discharged The engine cannot be started by push-starting. ■ To prevent battery discharge ● Turn off the headlights and the audio system while the engine is turnedoff. ● Turn off any unnecessary...

544 5-2. Steps to take in an emergency CAUTION ■ Avoiding battery fires or explosions Observe the following precautions to prevent accidentally igniting the flam-mable gas that may be emitted from the battery. ● Make sure the jumper cable is connected to the correct terminal and that itis not uninte...

5 Wh en t ro uble ar ises 545 5-2. Steps to take in an emergency If your vehicle overheats If your engine overheats: Stop the vehicle in a safe place and turn off the air condi-tioning system. Check to see if steam is coming out from under the hood. If you see steam: Stop the engine. Carefully lift ...

546 5-2. Steps to take in an emergency ■ Overheating If you observe the following, your vehicle may be overheating. ● The engine coolant temperature gauge enters the red zone or a loss ofpower is experienced. ● Steam is coming from under the hood. CAUTION ■ To prevent an accident or injury when insp...

548 5-2. Steps to take in an emergency If the vehicle becomes stuck CAUTION ■ When attempting to free a stuck vehicle If you choose to rock the vehicle back and forth to free it, make sure the sur-rounding area is clear, to avoid striking other vehicles, objects or persons.The vehicle may also lunge...

5 Wh en t ro uble ar ises 549 5-2. Steps to take in an emergency NOTICE ■ To avoid damaging the transmission and other components ● Avoid spinning the wheels and do not rev the engine. ● If the vehicle remains stuck after trying these procedures, the vehicle mayrequire towing to be freed.

552 6-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions and weights * 1 : GVM condition * 2 : Without towing package * 3 : With towing package Overall length 188.4 in. (4785 mm) Overall width 75.2 in. (1910 mm) Overall height Without roof rails68.1 in. (1730 mm)With roof rails69....

553 6-1. Specifications 6 Vehicl e sp ecification s Vehicle identification ■ Vehicle identification number The vehicle identification number (VIN) is the legal identifier for yourvehicle. This is the primary identification number for your Toyota. It isused in registering the ownership of your vehicl...

554 6-1. Specifications ■ Engine number The engine number is stamped on the engine block as shown. 2.7 L 4-cylinder (1AR-FE) engine 3.5 L V6 (2GR-FE) engine

555 6-1. Specifications 6 Vehicl e sp ecification s Engine Fuel Model 1AR-FE 2GR-FE Type 4-cylinder in line, 4-cycle, gasoline 6-cylinder V type, 4-cycle, gasoline Bore and stroke 3.54 × 4.13 in. (90.0 × 105.0 mm) 3.70 × 3.27 in. (94.0 × 83.0 mm) Displacement 163.0 cu.in. (2672 cm 3 ) 210.9 cu.in. (...

556 6-1. Specifications Lubrication system Oil capacityDrain and refill (Refer-ence) Without filter With filter 2.7 L 4-cylinder (1AR-FE) engine4.2 qt. (4.0 L, 3.5 Imp. qt.)3.5 L V6 (2GR-FE) engine6.0 qt. (5.7 L, 5.0 Imp. qt.) 2.7 L 4-cylinder (1AR-FE) engine4.7 qt. (4.4 L, 3.9 Imp. qt.)3.5 L V6 (2G...

558 6-1. Specifications Oil viscosity ● The 5W portion of the oil viscosity rating indicates the characteristicof the oil which allows cold startability. Oils with a lower value beforethe W allow for easier starting of the engine in cold weather. ● The 30 in 5W-30 indicates the oil viscosity when th...

559 6-1. Specifications 6 Vehicl e sp ecification s Ignition system Electrical system Spark plug Make Gap 2.7 L 4-cylinder (1AR-FE) engineDENSO, SK16HR113.5 L V6 (2GR-FE) engineDENSO FK20HR11 0.043 in. (1.1 mm) NOTICE ■ Iridium-tipped spark plugs Use only iridium-tipped spark plugs. Do not adjust ga...

560 6-1. Specifications Rear differential (4WD models) Automatic transaxle *: The fluid capacity is the quantity of reference. If replacement is nec- essary, contact your Toyota dealer. Oil capacity 1.0 qt. (0.9 L, 0.8 Imp. qt.) Oil type Hypoid gear oil API GL-5 Recommended oil viscosity Above 0 ° F...

561 6-1. Specifications 6 Vehicl e sp ecification s Transfer (4WD models) Brakes * 1 : Minimum pedal clearance when depressed with a force of 110 lbf (490 N, 50 kgf) while the engine is running * 2 : Parking brake pedal travel when depressed with a force of 66 lbf (294 N, 30 kgf) Steering Oil capaci...

562 6-1. Specifications Tires and wheels Type A Tire size P245/65R17 105S Tire inflation pressure(Recommended cold tire inflation pressure) Driving under normal conditions Front:30 psi (210 kPa, 2.1 kgf/cm 2 or bar) Rear:30 psi (210 kPa, 2.1 kgf/cm 2 or bar) Spare: 30 psi (210 kPa, 2.1 kgf/cm 2 or b...

567 6-1. Specifications 6 Vehicl e sp ecification s Fuel information ■ Fuel tank opening for unleaded gasoline To help prevent incorrect fueling, your Toyota has a fuel tank opening thatonly accommodates the special nozzle on unleaded fuel pumps. ■ If your engine knocks ● Consult your Toyota dealer....

569 6-1. Specifications 6 Vehicl e sp ecification s NOTICE ■ Notice on fuel quality ● Do not use improper fuels. If improper fuels are used the engine will bedamaged. ● Do not use leaded gasoline.Leaded gasoline will cause the three-way catalytic converter to lose itseffectiveness and the emission c...

570 6-1. Specifications Tire information Typical tire symbols Full-size spare tire Compact spare tire Tire size ( → P. 573) DOT and Tire Identification Number (TIN) ( → P. 572) Uniform tire quality grading For details, see “Uniform tire quality grading” that follows. Location of treadwear indicators...

571 6-1. Specifications 6 Vehicl e sp ecification s Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are thestrands which form the plies in a tire. Radial tires or bias-ply tires A radial tire has “RADIAL” on the sidewall. A tire not marked“RADIAL” is a bias...

572 6-1. Specifications Typical DOT and tire identification number (TIN) DOT symbol* Tire Identification Number(TIN) Tire manufacturer's identifica-tion mark Tire size code Manufacturer's optional tiretype code (3 or 4 letters) Manufacturing week Manufacturing year *: The DOT symbol certifies that t...

573 6-1. Specifications 6 Vehicl e sp ecification s Tire size ■ Typical tire size information The illustration indicates typicaltire size. Tire use(P = Passenger car, T = Temporary use) Section width (millimeters) Aspect ratio(tire height to section width) Tire construction code (R = Radial, D = Dia...

574 6-1. Specifications Tire section names Bead Sidewall Shoulder Tread Belt Inner liner Reinforcing rubber Carcass Rim lines Bead wires Chafer Uniform Tire Quality Grading This information has been prepared in accordance with regulationsissued by the National Highway Traffic Safety Administration o...

575 6-1. Specifications 6 Vehicl e sp ecification s ■ Treadwear The treadwear grade is a comparative rating based on the wearrate of the tire when tested under controlled conditions on a speci-fied government test course. For example, a tire graded 150 would wear one and a half (1 - 1/2)times as wel...

576 6-1. Specifications Warning: The temperature grades for this tire are established for atire that is properly inflated and not overloaded.Excessive speed, underinflation, or excessive loading, either sepa-rately or in combination, can cause heat buildup and possible tire fail-ure. Glossary of tir...

581 6-1. Specifications 6 Vehicl e sp ecification s * : Table 1 ⎯ Occupant loading and distribution for vehicle normal load for various designated seating capacities Tire related term Meaning Tread That portion of a tire that comes into contact with the road Tread rib A tread section running circumf...

582 6-2. Customization Customizable features Item Function Default setting Customized setting Door lock ( → P. 66, 539) Speed-detecting auto-matic door lock function Off On Opening driver's door unlocks all doors Off On Shifting gears to P unlocks all doors On Off Shifting gears to posi-tion other t...

585 6 Vehicl e sp ecification s 6-3. Initialization Items to initialize Item When to initialize Reference Power back door • After reconnecting or changing the battery • After changing a fuse P. 71 Tire pressure warning system • When changing the tire inflation pressure by changing traveling speed or...

589 7 For owners Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions inEnglish. Utilisation correcte des ceinture...

590 Entretien et soin ■ Ceintures de sécurité Nettoyez avec un chiffon ou une éponge humectée d'eau savonneuse tiède.Profitez de l'occasion pour vérifier régulièrement que les ceintures ne sontpas effilochées, entaillées, ou ne paraissent pas exagérément usées. ATTENTION ■ Détérioration et usure des...

607 What to do if... P. 513 or P. 511 P. 513 P. 511 ABS warning light Automatic transmission fluid temper-ature warning light Tire pressure warning light Electric power steering warning light A warning message is displayed P. 521 If a warning message is displayed

608 GAS STATION INFORMATION Auxiliary catch lever P. 432 Fuel filler door P. 111 Hood release lever P. 432 Fuel filler door opener P. 111 Tire inflation pressure P. 562 Back door opener P. 71 Fuel tank capacity (Reference) 19.2 gal. (72.5 L, 15.9 Imp. gal.) Fuel type Unleaded gasoline with an Octane...