Toyota 2010 Corolla- Manuals

4 OVERVIEW Instrument cluster Service indicator and reminderTachometerSpeedometerFuel gaugeTrip meter reset/Instrument panel light controlOdometer and two trip metersAutomatic Transmission shift range display (if equipped)Multi-information displayDisplay buttonEngine coolant temperature Optitron typ...

5 OVER VIEW FEA T URES/OPERA TIONS SAFETY AND EMERGENCY FEA T URES Indicator symbols Charging system warning 1 Brake system warning 1 AIR BAG ON and AIR BAG OFF indicator 1 Anti-lock Brake System warning 1 Headlight low/high beam indicator Turn signal indicator Slip indicator 1 Cruise control indica...

6 OVERVIEW Keyless entry (if equipped) Push Push ONCE: Driver door TWICE: All doors Locking operation Unlocking operation Panic button Push and hold NOTE: If a door is not opened within 60 seconds of unlocking, all doors willrelock for safety. Trunk lid operation Push and hold Fuel tank door release...

8 FEATURES/OPERATIONS Automatic Transmission (if equipped) * The ignition switch must be “ON” and the brake pedal depressed to shift from Park. Downshifting increases power going uphill, or provides engine brakingdownhill. For best fuel economy during normal driving conditions, alwaysdrive with the ...

9 OVER VIEW FEA T URES/OPERA TIONS SAFETY AND EMERGENCY FEA T URES Auto lock functions (if equipped) Automatic door locks can be programmed to operate in two differentmodes, or turned OFF. - Doors lock when shifting from Park. -Doors lock when the vehicle speed is approximately 12 mph or higher. - D...

10 FEATURES/OPERATIONS Seats-Head restraints Front Rear Lock release button Lock release button Windshield wipers & washers Interval wipe Single wipe Slow Fast Pull to washand wipe Windows-Power (if equipped) Up Down Driver side Window lock switch Automatic operation (driver side only) Push the ...

11 OVER VIEW FEA T URES/OPERA TIONS SAFETY AND EMERGENCY FEA T URES Lights & turn signals Turn signals Headlights High beam flasher Low beam Front fog lights (if equipped) Daytime Running Light system (DRL) Headlights turn on automatically upon starting engine. The brightness of the headlights w...

12 FEATURES/OPERATIONS Audio CD PLAYER To scan tracks on a disc Push and hold “SCAN.” Push again to hold selection. CD changer (Type 2)-To load one disc Push “LOAD” and insert one disc. -To load multiple discs Push and hold “LOAD” until you hear a beep. Insert one disc. Shutter will close and then r...

13 OVER VIEW FEA T URES/OPERA TIONS SAFETY AND EMERGENCY FEA T URES RADIO To preset stations Tune in the desired station and hold down a preset button (1-6) until you hear a beep. Push desired preset button (1-6) toselect. To scan stations Push and hold “SCAN” to scan preset stations. Push again to ...

14 FEATURES/OPERATIONS Air Conditioning/Heating Airflow ventIn “ ” or “ ” mode, use fresh air (“ ” indicator OFF) to reduce window fogging.Fan speedTemperature selectorAir Conditioning ON/OFFUse for quick cooling. MAX A/C changes air intake to recirculate.It is not possible to change intake to fresh...

15 OVER VIEW FEA T URES/OPERA TIONS SAFETY AND EMERGENCY FEA T URES Cruise control (if equipped) 1 The set speed may also be cancelled by depressing the brake pedal. 2 The set speed may be resumed once vehicle speed exceeds 25 mph. Turning system ON/OFF Functions System ON/OFF Increase speed Decreas...

16 FEATURES/OPERATIONS Bluetooth ® technology allows dialing or receive calls without taking hands from the steering wheel or using a cable to connect the compatibletelephone and the system. Refer to the Owner’s Manual for more details. Telephone controls (Bluetooth ® ) (if equipped) Vehicles withou...

17 OVER VIEW FEA TURES/OPERA TIONS SAFETY AND EMERGENCY FEA TURES Note: Do not attempt to adjust while the vehicle is in motion. Tilt and telescopic steering wheel Lock release lever Angle Length Hold wheel, push lever down,set angle and length, andreturn lever. Door locks-Power (if equipped) Lock U...

18 FEATURES/OPERATIONS Cup holders Front Auxiliary storage Instrument panel Overhead console Type A Type B Type C Rear Pull Pull Push Pull Light control-Instrument panel Brightnesscontrol - +

19 OVER VIEW FEA T URES/OPERA TIONS SAFETY AND EMERGENCY FEA T URES If belt is fully extended, then retracted even slightly, it cannot bere-extended beyond that point, unless fully retracted again. This featureis used to help hold child restraint systems securely. To find more information about seat...

20 System reset initialization 1. Push and hold “ SET” button until the indicator blinksthree times. 2. Wait a few minutes to allow initialization to complete. Trunk-Internal release Pull up Moving the lever to “LOCK” will allow the door to be opened only fromthe outside. Rear door Doors-Child safet...

462 Abbreviation list Abbreviation/Acronym list ABBREVIATIONS MEANING A/C Air Conditioning ABS Anti-lock Brake System ACC Accessory ALR Automatic Locking Retractor CRS Child Restraint System ECU Electronic Control Unit EDR Event Data Recorder ELR Emergency Locking Retractor EPS Electric Power Steeri...

14 For your information Main Owner’s Manual Please note that this manual covers all models and all equipment, includingoptions. Therefore, you may find some explanations for equipment notinstalled on your vehicle. All specifications provided in this manual are current at the time of printing.However...

16 CAUTION ■ General precautions while driving Driving under the influence: Never drive your vehicle when under the influ-ence of alcohol or drugs that have impaired your ability to operate your vehi-cle. Alcohol and certain drugs delay reaction time, impair judgment andreduce coordination, which co...

17 Symbols used throughout this manual Cautions & Notices Symbols used in illustrations CAUTION This is a warning against anything which may cause death or injury to people ifthe warning is ignored. You are informed about what you must or must not doin order to reduce the risk of injury to yours...

TABLE OF CONTENTS 1 1 Before driving Adjusting and operating features such as door locks, mirrors, and steering column. 2 When driving Driving, stopping and safe-driving information. 3 Interior fea- tures Air conditioning and audio systems, as well as other in- terior features for a comfortable driv...

20 1-1. Key information Keys The following keys are provided with the vehicle. Vehicles with smart key system Electronic keys • Operating the smart key system ( → P. 23) • Operating the wireless remote control function ( → P. 33) Mechanical keysKey number plate Vehicles without smart key system (typ...

21 1-1. Key information 1 Before driving Using the mechanical key (vehicles with smart key system) Take out the mechanical key. After using the mechanical key,store it in the electronic key. Carrythe mechanical key together withthe electronic key. If the electronickey battery is depleted or theentry...

22 1-1. Key information NOTICE ■ To prevent key damage ● Do not subject the keys to strong shocks, expose them to high tempera-tures by placing them in direct sunlight, or get them wet. ● Do not expose the keys to electromagnetic materials or attach any mate-rial that blocks electromagnetic waves to...

23 1 Before driving 1-2. Opening, closing and locking the doors and trunk Smart key system ∗ The following operations can be performed simply by carrying theelectronic key on your person, for example in your pocket.(The driver should always carry the electronic key.) Locks and unlocks the doors ( → ...

25 1-2. Opening, closing and locking the doors and trunk 1 Before driving Antenna location and effective range ■ Antenna location Antennas outside the cabinAntenna outside the trunkAntenna inside the trunkAntennas inside the cabin

26 1-2. Opening, closing and locking the doors and trunk ■ Effective range (areas within which the electronic key isdetected) When locking or unlockingthe doors The system can be operatedwhen the electronic key iswithin about 2.3 ft. (0.7 m) ofeither of the outside frontdoor handles. (Only thedoors ...

27 1-2. Opening, closing and locking the doors and trunk 1 Before driving ■ Operation signals A buzzer sounds and the emergency flashers flash to indicate that the doorshave been locked/unlocked. (Locked: Once; Unlocked: Twice) ■ Conditions affecting operation The smart key system uses weak radio wa...

29 1-2. Opening, closing and locking the doors and trunk 1 Before driving ■ Electronic key battery depletion ● The standard battery life is 1 to 2 years. ● The battery becomes depleted even if the electronic key is not usedbecause the key always transmits radio waves. If the smart key systemor the w...

32 1-2. Opening, closing and locking the doors and trunk ■ If the smart key system does not operate properly ● Locking and unlocking the doors and trunk: Use the mechanical key.( → P. 408) ● Starting the engine: → P. 409 ■ When the electronic key battery is fully depleted → P. 346 ■ Customization th...

33 1 1-2. Opening, closing and locking the doors and trunk Before driving Wireless remote control ∗ The wireless remote control can be used to lock and unlock the vehi-cle from outside the vehicle. Vehicles with smart key system Locks all doorsUnlocks doors Pressing the button unlocksthe driver’s do...

34 1-2. Opening, closing and locking the doors and trunk ■ Operation signals Doors: A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked:Twice) Trunk: A buzzer sounds to indicate that the trunk has been unlocked. ■ Door lock b...

35 1-2. Opening, closing and locking the doors and trunk 1 Before driving ■ Key battery depletion Vehicles with smart key system → P. 29 Vehicles without smart key system If the wireless remote control function does not operate, the battery may bedepleted. Replace the battery when necessary. ( → P. ...

36 1-2. Opening, closing and locking the doors and trunk ■ Customization that can be configured at Toyota dealer Settings (e.g. trunk unlocking function) can be changed. (Customizable features → P. 452) ■ Certification for wireless remote control For vehicles sold in the U.S.A. FCC ID: HYQ12BBY HYQ1...

38 1-2. Opening, closing and locking the doors and trunk Doors The vehicle can be locked and unlocked using the entry function,wireless remote control, key or door lock switch. ■ Entry function (vehicles with smart key system) → P. 23 ■ Wireless remote control (if equipped) → P. 33 ■ Key Vehicles wi...

39 1-2. Opening, closing and locking the doors and trunk 1 Before driving Rear door child-protector lock The door cannot be opened frominside the vehicle when the locksare set. These locks can be set to preventchildren from opening the reardoors. Push down on each reardoor switch to lock both reardo...

40 1-2. Opening, closing and locking the doors and trunk Automatic door locking and unlocking systems (vehicles withpower door lock system) The following functions can be set or cancelled: * 1 : Vehicles with an automatic transmission only * 2 : Vehicles with smart key system Function Operation Shif...

41 1-2. Opening, closing and locking the doors and trunk 1 Before driving ■ Setting and canceling the functions To switch between set and canceled, follow the procedure below: Vehicles with smart key system: Close all the doors andswitch the “ENGINE START STOP” switch to IGNITION ONmode. (Perform th...

43 1-2. Opening, closing and locking the doors and trunk 1 Before driving CAUTION ■ To prevent an accident Observe the following precautions while driving the vehicle.Failing to do so may result in a door opening and an occupant falling out,resulting in death or serious injury. ● Always use a seat b...

44 1-2. Opening, closing and locking the doors and trunk Trunk The trunk can be opened using the entry function, wireless remotecontrol, key or trunk opener. ■ Opening the trunk from inside the vehicle Release the trunk lid. ■ Opening the trunk from outside the vehicle Entry function (vehicles with ...

45 1-2. Opening, closing and locking the doors and trunk 1 Before driving Trunk opener cancelling system To protect luggage stored in the trunk against theft, do the followingprocedure. Turn the master key (vehicleswithout smart key system) ormechanical key (vehicles withsmart key system) counterclo...

46 1-2. Opening, closing and locking the doors and trunk CAUTION ■ Caution while driving ● Keep the trunk lid closed while driving. If the trunk lid is left open, it may hit near-by objects while driving or lug-gage in the trunk may be unexpectedly thrown out, causing an accident.In addition, exhaus...

47 1-2. Opening, closing and locking the doors and trunk 1 Before driving CAUTION ■ Using the trunk Observe the following precautions.Failure to do so may cause parts of the body to be caught, resulting in seri-ous injury. ● Remove any heavy loads, such as snow and ice, from the trunk lid beforeopen...

48 1-3. Adjustable components (seats, mirrors, steering wheel) Front seats Power seat (driver's side only) Seat position switchSeatback angle switchSeat cushion (front) angle switchVertical height adjustment switchLumbar support switch

49 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving Active head restraints When the occupant’s backpresses against the seatbackduring a rear-end collision, thehead restraint moves slightly for-ward to help reduce the risk ofwhiplash on the seat occupant. Manual seat Seat ...

50 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Active head restraints Even small forces applied to the seatback may cause the head restraint tomove. Pushing up a locked head restraint forcibly may appear the headrestraint inner structure. These do not indicate problems. CAUTION ■ S...

51 1 1-3. Adjustable components (seats, mirrors, steering wheel) Before driving Rear seats ■ Before folding down the rear seat Stow the rear outside seat beltbuckles and move the rearcenter seat belt buckle asshown. ■ Folding down rear seatbacks Pull the seatback lever in thetrunk for the seatback y...

52 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ After returning the seatback to the upright position Observe the following precautions. Failure to do so may result in death orserious injury. ● Make sure the seatback is securely locked by pressing forward and rear-ward on the...

53 1 1-3. Adjustable components (seats, mirrors, steering wheel) Before driving Head restraints ■ Removing the head restraints Head restraints are provided for all seats. Front seats Up Pull the head restraints up. Down Push the head restraint downwhile pushing the lock releasebutton. Rear seats Up ...

54 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Installing the head restraints ■ Adjusting the height of the head restraints ■ Adjusting the rear center seat head restraint Always raise the head restraint one level from the stowed position whenusing. CAUTION ■ Head restraint precaut...

55 1 1-3. Adjustable components (seats, mirrors, steering wheel) Before driving Seat belts Make sure that all occupants are wearing their seat belts before driv-ing the vehicle. ■ Correct use of the seat belts ● Extend the shoulder belt sothat it comes fully over theshoulder, but does notcome into c...

58 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Emergency locking retractor (ELR) The retractor will lock the belt during a sudden stop or on impact. It may alsolock if you lean forward too quickly. A slow, easy motion will allow the belt toextend so that you can move around fully. ...

59 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving ■ Child seat belt usage The seat belts of your vehicle were principally designed for persons of adultsize. ● Use a child restraint system appropriate for the child, until the childbecomes large enough to properly wear th...

60 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION Observe the following precautions to reduce the risk of injury in the event ofsudden braking, sudden swerving or an accident.Failing to do so may cause death or severe injury. ■ Wearing a seat belt ● Ensure that all passengers we...

61 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving CAUTION ■ Child restraint lock function belt precaution Do not allow children to play with the child restraint lock function belt. If thebelt becomes twisted around a child's neck, it will not be possible to pull thebelt...

62 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ Using a seat belt comfort guide ● Make sure the belt is not twisted and that it lies flat. The elastic cord mustbe behind the belt and the guide must be on the front. ● To reduce the chance of injury in case of a sudden stop, s...

63 1 1-3. Adjustable components (seats, mirrors, steering wheel) Before driving Steering wheel CAUTION ■ Caution while driving Do not adjust the steering wheel while driving.Doing so may cause the driver to mishandle the vehicle and cause an acci-dent, resulting in death or serious injury. ■ After a...

64 1-3. Adjustable components (seats, mirrors, steering wheel) Anti-glare inside rear view mirror Glare from the headlights of vehicles behind can be reduced byusing the following functions. Manual anti-glare inside rear view mirror Normal positionAnti-glare position Auto anti-glare inside rear view...

65 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving ■ To prevent sensor error CAUTION ■ Caution while driving Do not adjust the position of the mirror while driving.Doing so may lead to mishandling of the vehicle and an accident, resulting indeath or serious injury. To en...

66 1-3. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors Folding back the mirrors Push backward to fold the mir-rors. Mirror angle can be adjusted using the switch. Select a mirror to adjust. LeftRight Adjust the mirror. UpRightDownLeft STEP 1 STEP 2

67 1-3. Adjustable components (seats, mirrors, steering wheel) 1 Before driving ■ Mirror angle can be adjusted when Vehicles with smart key system The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ONmode. Vehicles without smart key system The engine switch is in the “ACC” or “ON” position. ...

68 1-4. Opening and closing the windows Power windows ∗ Lock switch Press the switch down to lockthe passenger window switches. Use this switch to prevent chil-dren from accidentally opening orclosing a passenger window. The power windows can be opened and closed using the followingswitches. Closing...

69 1-4. Opening and closing the windows 1 Before driving ■ The power windows can be operated when Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. Vehicles without smart key system The engine switch is in the “ON” position. ■ Operating the power windows after tur...

70 1-4. Opening and closing the windows Moon roof ∗ Use the overhead switches to open, close, and tilt the moon roof upand down. ■ Opening and closing Open* The moon roof stops slightlybefore the fully opened posi-tion.Push the switch again to fullyopen. Close* *: Push the switch in either direc- ti...

71 1-4. Opening and closing the windows 1 Before driving ■ The moon roof can be operated when Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. Vehicles without smart key system The engine switch is in the “ON” position. ■ Operating the moon roof after turning the...

72 1-4. Opening and closing the windows CAUTION ■ Opening the moon roof Observe the following precautions.Failing to do so may cause death or serious injury. ● Do not allow any passengers to put their hands or heads outside the vehi-cle while it is moving. ● Do not sit on top of the moon roof. ■ Clo...

73 1 Before driving 1-5. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap. ■ Before refueling the vehicle Vehicles with smart key system Turn the “ENGINE START STOP” switch OFF and ensure thatall the doors and windows are closed. Vehicles without smart key sy...

74 1-5. Refueling Closing the fuel tank cap When replacing the fuel tankcap, turn it until a clicking soundis heard. After releasing your hand, the capwill turn slightly to the oppositedirection. Hang the fuel tank cap on theback of the fuel filler door. STEP 3 ■ Fuel type Unleaded gasoline (Octane ...

75 1-5. Refueling 1 Before driving CAUTION ■ Refueling the vehicle Observe the following precautions while refueling the vehicle. Failure to do so may result in death or serious injury. ● Touch the vehicle or some other metal surface to discharge any staticelectricity.Sparks resulting from dischargi...

76 1-5. Refueling NOTICE ■ Refueling Do not spill fuel during refueling.Doing so may damage the vehicle, such as causing the exhaust systems tooperate abnormally or damaging fuel system components or the vehicle'spainted surface.

77 1 Before driving 1-6. Theft deterrent system Engine immobilizer system The vehicle's keys have built-in transponder chips that prevent theengine from starting if the key has not been previously registered inthe vehicle's on-board computer.Never leave the keys inside the vehicle when you leave the...

78 1-6. Theft deterrent system ■ System maintenance The vehicle has a maintenance-free type engine immobilizer system. ■ Conditions that may cause the system to malfunction ● If the key is in contact with a metallic object ● If the key is in close proximity to or touching a key to the security syste...

79 1-6. Theft deterrent system 1 Before driving CAUTION Changes or modifications not expressly approved by the party responsiblefor compliance could void the user’s authority to operate the equipment. NOTICE ■ To ensure the system operates correctly Do not modify or remove the system. If modified or...

81 1 Before driving 1-7. Safety information Correct driving posture Drive in a good posture as follows: Sit upright and well back inthe seat. ( → P. 49) Adjust the position of theseat forward or backward toensure the pedals can bereached and easilydepressed to the extentrequired. ( → P. 49) Adjust t...

82 1-7. Safety information CAUTION ■ While driving ● Do not adjust the position of the driver's seat while driving.Doing so could cause the driver to lose control of the vehicle. ● Do not place a cushion between the driver or passenger and the seatback.A cushion may prevent correct posture from bein...

83 1 1-7. Safety information Before driving SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. Front airbag...

84 1-7. Safety information Airbag system components Your vehicle is equipped with ADVANCED AIRBAGS designed basedon US motor vehicle safety standards (FMVSS208). The airbag sys-tem controls airbag deployment power for the driver and front pas-senger. The driver airbag system consists of the driver s...

86 1-7. Safety information ■ SRS warning light This warning light system monitors the airbag sensor assembly, front airbagsensors, side and curtain shield airbag sensors, curtain shield airbag sen-sors, driver's seat position sensor, driver's seat belt buckle switch, front pas-senger occupant classi...

89 1-7. Safety information 1 Before driving ■ When to contact your Toyota dealer In the following cases, contact your Toyota dealer as soon as possible. Donot disconnect the battery cables before contacting your Toyota dealer. ● Any of the SRS airbags have been inflated. ● The front of the vehicle i...

90 1-7. Safety information CAUTION ■ SRS airbag precautions Observe the following precautions regarding the airbags. Failure to do so may cause death or serious injury. ● The driver and all passengers in the vehicle must wear their seat beltsproperly.The SRS airbags are supplemental devices to be us...

93 1-7. Safety information 1 Before driving CAUTION ■ SRS airbag precautions ● Do not use seat accessories which cover the parts where the SRS sideairbags inflate as they may interfere with inflation of the airbags. ● Do not strike or apply significant levels of force to the area of the SRS air-bag ...

94 1-7. Safety information CAUTION ■ SRS airbag precautions ● If breathing becomes difficult after the SRS airbag has deployed, open adoor or window to allow fresh air in, or leave the vehicle if it is safe to doso. Wash off any residue as soon as possible to prevent skin irritation. ● If the areas ...

95 1 1-7. Safety information Before driving Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classifica- tion system. This system detects the conditions of the front passen- ger seat and activates or deactivates the devices for the front passeng...

97 1-7. Safety information 1 Before driving ■ Unoccupied ■ There is a malfunction in the system *1 : The system judges a person of adult size as an adult. When a smaller adult sits in the front passenger seat, the system may rec-ognize him/her as a child depending on his/her physique and pos-ture. *...

98 1-7. Safety information *4 : Never install a rear-facing child restraint system on the front pas- senger seat. A forward-facing child restraint system should onlybe installed on the front passenger seat when it is unavoidable.( → P. 100) *5 : In case the indicator is not illuminated, consult this...

99 1-7. Safety information 1 Before driving CAUTION ■ Front passenger occupant classification system precautions ● Do not recline the front passenger seatback so far that it touches a rearseat. This may cause the “AIR BAG OFF” indicator light to be illuminated,which indicates that the passenger’s ai...

100 1-7. Safety information Child restraint systems Points to remember Studies have shown that installing a child restraint system on a rearseat is much safer than installing one to the front passenger seat. ● Choose a child restraint system that suits your vehicle and isappropriate to the age and s...

101 1-7. Safety information 1 Before driving Types of child restraints Child restraint systems are classified into the following 3 typesaccording to the age and size of the child. Rear facing ⎯ Infant seat/convertible seat Forward facing ⎯ Convertible seat Booster seat

102 1-7. Safety information ■ Selecting an appropriate child restraint system ● Use a child restraint system appropriate for the child until the childbecomes large enough to properly wear the vehicle’s seat belt. ● If a child is too large for a child restraint system, sit the child on a rearseat and...

104 1-7. Safety information Installing child restraints Follow the child restraint system manufacturer's instructions. Firmly secure child restraints to the rear seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt can be ...

105 1-7. Safety information 1 Before driving Installation with LATCH system Rear right seat only: Slide therear center seat belt to the sideto prevent it from getting pinchedin the lower anchorage. Type A Widen the gap betweenthe seat cushion andseatback slightly. Latch the hooks of thelower straps ...

106 1-7. Safety information Type B Widen the gap betweenthe seat cushion andseatback slightly. Latch the buckles ontothe LATCH anchors. If the child restraint has atop tether strap, the toptether strap should belatched onto the toptether strap anchors. For owners in Canada:A symbol on a child restra...

109 1-7. Safety information 1 Before driving While pushing the child seat intothe rear seat, allow the shoulderbelt to retract until the child seatis securely in place. After the shoulder belt hasretracted to a point where there isno slack in the belt, pull the belt tocheck that it cannot be extende...

110 1-7. Safety information Removing a child restraint installed with a seat belt Push the release button and fullyretract the seat belt.

111 1-7. Safety information 1 Before driving Child restraint systems with a top tether strap Secure the child restraint using a seat belt lower anchor, anddo the following. Outside Remove the head restraint. Center Lock the head restraint in placeat the lowest position. Open the anchor bracket cover...

112 1-7. Safety information Outside only: Replace the headrestraint. STEP 3 ■ Laws and regulations pertaining to anchorages The LATCH system conforms to FMVSS225 or CMVSS210.2.Child restraint systems conforming to FMVSS213 or CMVSS213 specifica-tions can be used.This vehicle is designed to conform t...

113 1-7. Safety information 1 Before driving CAUTION ■ When installing a booster seat Do not fully extend the shoulder belt to prevent the belt from going to ALRlock mode: ( → P. 59) ALR mode causes the belt to tighten only which could cause injury or dis-comfort to the child. ■ When installing a ch...

114 1-7. Safety information CAUTION ■ When installing a child restraint system ● When a booster seat is installed, always ensure that the shoulder belt ispositioned across the center of the child's shoulder. The belt should bekept away from the child's neck, but not so that it could fall off the chi...

116 2-1. Driving procedures Driving the vehicle The following procedures should be observed to ensure safe driv- ing. ■ Starting the engine → P. 126, 130 ■ Driving Automatic transmission With the brake pedal depressed, shift the shift lever to D. ( → P. 134) Release the parking brake. ( → P. 141) Gr...

117 2-1. Driving procedures 2 Wh en drivin g ■ Parking the vehicle Automatic transmission With the shift lever in D, depress the brake pedal. Set the parking brake. ( → P. 141) Shift the shift lever to P. ( → P. 134) When parking on a hill, if necessary, block the wheels. Vehicles with smart key sys...

118 2-1. Driving procedures Starting on a steep uphill Automatic transmission Firmly set the parking brake and shift the shift lever to D. Gently depress the accelerator pedal. Release the parking brake. Manual transmission With the parking brake firmly set and the clutch pedal fullydepressed, shift...

119 2-1. Driving procedures 2 Wh en drivin g ■ Operating your vehicle in a foreign country Comply with the relevant vehicle registration laws and confirm the availabilityof the correct fuel. ( → P. 426) ■ Normal characteristics after turning off the engine Approximately five hours after the engine i...

121 2-1. Driving procedures 2 Wh en drivin g CAUTION ● Do not adjust the position of the steering wheel, the seat, or the inside oroutside rear view mirrors while driving. Doing so may result in a loss ofvehicle control that can cause accidents that may result in death or seriousinjury. ● Always che...

122 2-1. Driving procedures CAUTION ● Vehicles with an automatic transmission: Always keep a foot on the brakepedal while the engine is running to prevent an accident caused by thevehicle moving. ■ When the vehicle is parked ● Do not leave glasses, cigarette lighters, spray cans, or soft drink cans ...

123 2-1. Driving procedures 2 Wh en drivin g CAUTION ■ When taking a nap in the vehicle Always turn the engine off. Otherwise, you may accidentally move the shiftlever or depress the accelerator pedal, which could cause an accident or firedue to engine overheating. Additionally, if the vehicle is pa...

124 2-1. Driving procedures NOTICE ■ When driving the vehicle Manual transmission ● Do not shift gears unless the clutch pedal is fully depressed. After shifting,do not release the clutch abruptly. Doing so may damage the clutch, tran-saxle and gears. ● Do not rest your foot on the clutch pedal whil...

125 2-1. Driving procedures 2 Wh en drivin g NOTICE ■ If you hear a squealing or scraping noise (brake pad wear limit indica-tors) Have the brake pads checked and replaced by your Toyota dealer as soonas possible. Rotor damage can result if the pads are not replaced when needed. It is dangerous to d...

126 2-1. Driving procedures Engine (ignition) switch (vehicles with smart key system) Performing the following operations when carrying the electronic key on your person starts the engine or changes “ENGINE START STOP” switch modes. ■ Starting the engine Check that the parking brake is set. Check th...

127 2-1. Driving procedures 2 Wh en drivin g ■ Changing “ENGINE START STOP” switch mode Modes can be changed by pressing the “ENGINE START STOP”switch with the brake pedal released. (The mode changes eachtime the switch is pressed.) OFF* The emergency flashers canbe used. ACCESSORY mode Some electri...

128 2-1. Driving procedures ■ Steering lock release ■ If the engine does not start The engine immobilizer system may not have been deactivated. ( → P. 78) ■ When the “ENGINE START STOP” switch indicator flashes in amber The system may be malfunctioning. Have the vehicle inspected by yourToyota deale...

129 2-1. Driving procedures 2 Wh en drivin g CAUTION ■ When starting the engine Always start the engine while sitting in the driver's seat. Do not depress theaccelerator pedal while starting the engine under any circumstances.Doing so may cause an accident resulting in death or serious injury. ■ Sto...

131 2-1. Driving procedures 2 Wh en drivin g ■ Turning the engine switch from “ACC” to “LOCK” ■ Changing engine switch position “LOCK” The steering wheel is lockedand the key can be removed.(Vehicles with an automatictransmission: The key can beremoved only when the shiftlever is in P.) “ACC” Some e...

132 2-1. Driving procedures ■ Steering lock release ■ If the engine does not start The engine immobilizer system may not have been deactivated. ( → P. 78) ■ Key reminder buzzer A buzzer sounds if the driver’s door is opened while the engine switch is inthe “LOCK” position to remind you to remove the...

134 2-1. Driving procedures Automatic transmission ∗ Select a shift position appropriate for the driving conditions. ■ Shifting the shift lever Standard type Vehicles with smart key system:While the “ENGINE START STOP” switch is in IGNITIONON mode, depress the brake pedal and move the shiftlever. Ve...

135 2-1. Driving procedures 2 Wh en drivin g Multi-mode type While the engine switch is in the “ON” position, depress the brake pedal and move the shift lever.

136 2-1. Driving procedures ■ Shift position uses * 1 : Shifting to the D position allows the system to select a gear suitable driving conditions. Setting the shift lever to the D position is recom-mended for normal driving. * 2 : Selecting shift ranges using S mode restricts the upper limit of the ...

137 2-1. Driving procedures 2 Wh en drivin g Changing shift ranges in S mode (multi-mode type) Shift the shift lever to the S position and operate the shift lever. Upshifting Downshifting The initial shift range in S mode is automatically set to 4 or 5. 5-speed models: When the shift range is “4” or...

138 2-1. Driving procedures A lower shift range will provide greater engine braking forces than ahigher shift range. ■ Downshifting restrictions Standard type The shift lever cannot be downshifted if the following speeds are exceeded. mph (km/h) Multi-mode type To help ensure safety and driving perf...

139 2-1. Driving procedures 2 Wh en drivin g Manual transmission ∗ ■ Maximum allowable speeds Observe the following maximum allowable speeds in each gear when maxi-mum acceleration is necessary. 2.4 L 4-cylinder (2AZ-FE) engine mph (km/h) 1.8 L 4-cylinder (2ZR-FE) engine mph (km/h) ■ Shifting the sh...

140 2-1. Driving procedures Turn signal lever ■ Turn signals can be operated when Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. Vehicles without smart key system The engine switch is in the “ON” position. ■ If the indicators flash faster than usual Check that ...

141 2-1. Driving procedures 2 Wh en drivin g Parking brake NOTICE ■ Before driving Fully release the parking brake.Driving the vehicle with the parking brake set will lead to brake componentsoverheating, which may affect braking performance and increase brakewear. Sets the parking brake Fully set th...

142 2-1. Driving procedures Horn ■ After adjusting the steering wheel Make sure that the steering wheel is securely locked.The horn may not sound if the steering wheel is not securely locked. ( → P. 64) To sound the horn, press on orclose to the mark.

143 2 When drivin g 2-2. Instrument cluster Gauges and meters Optitron type meters Vehicles with smart key system The following gauges, meters and displays illuminate when the“ENGINE START STOP” switch is in IGNITION ON mode. Vehicles without smart key system The following gauges, meters and display...

144 2-2. Instrument cluster Odometer/trip meter/instrument panel light control and trip meterreset button Switches between odometer and trip meter displays. Pressing andholding the button will reset the trip meter when the trip meter is beingdisplayed. To adjust the brightness of the instrument pane...

145 2-2. Instrument cluster 2 When drivin g Non-Optitron type meters The following gauges, meters and displays illuminate when theengine switch is in “ON” position. Tachometer Displays the engine speed in revolutions per minute. Speedometer Displays the vehicle speed. Fuel gauge Displays the quantit...

146 2-2. Instrument cluster Instrument panel light control The brightness of the instrument panel lights can be adjusted. DarkerBrighterOptitron type meter: When theheadlight switch is turned on,the brightness will be reducedslightly unless the control but-ton is turned fully clockwise. Odometer and...

147 2-2. Instrument cluster 2 When drivin g Indicators and warning lights The indicator and warning lights on the instrument cluster and cen-ter panel inform the driver of the status of the vehicle’s various sys-tems. ■ Instrument cluster Optitron type meters Non-Optitron type meters

149 2-2. Instrument cluster 2 When drivin g ■ Indicators The indicators inform the driver of the operating state of thevehicle’s various systems. Turn signal indicator ( → P. 140) (U.S.A.) Headlight indicator( → P. 154) Headlight high beam indicator ( → P. 154) (Canada) Tail light indicator( → P. 15...

150 2-2. Instrument cluster CAUTION ■ If a safety system warning light does not come on Should a safety system light such as the ABS or SRS airbag warning lightnot come on when you start the engine, this could mean that these systemsare not available to help protect you in an accident, which could r...

151 2-2. Instrument cluster 2 When drivin g Multi-information display Switch the display Display items can be switchedby pressing the display button. ● Outside temperature ● Instantaneous fuel consumption The multi-information display presents the driver with a variety ofdriving-related data, includ...

152 2-2. Instrument cluster ● Average fuel consumption ● Driving range ● Average vehicle speed ● Elapsed time Displays the average fuel consumption since thefunction was reset. The function can be reset by pressing the display but-ton for longer than one second when the average fuelconsumption is di...

153 2-2. Instrument cluster 2 When drivin g ■ When disconnecting and reconnecting battery terminals The following information data will be reset. ● Average fuel consumption ● Driving range ● Average vehicle speed ● Elapsed time ■ Display In the following situations, the correct outside temperature m...

154 2-3. Operating the lights and wipers Headlight switch Turning on the high beam headlights With the headlights on, pushthe lever forward to turn on thehigh beams. Pull the lever back to the centerposition to turn the high beamsoff. Pull the lever toward you toturn on the high beams. Release the l...

155 2-3. Operating the lights and wipers 2 When drivin g ■ Daytime running light system ● To make your vehicle more visible to other drivers, the headlights turn onautomatically whenever the engine is started and the parking brake isreleased.The brightness of headlights will automatically change dep...

156 2-3. Operating the lights and wipers Fog light switch ∗ The fog lights improve visibility in difficult driving conditions, suchas in rain or fog. They can be turned on only when the headlights areon low beam. OffFront fog lights on ∗ : If equipped

157 2-3. Operating the lights and wipers 2 When drivin g Windshield wipers and washer Wiper intervals can be adjusted for intermittent operation. Intermittent windshieldwiper operationLow speed windshield wiperoperationHigh speed windshieldwiper operationTemporary operation Increases the intermitten...

158 2-3. Operating the lights and wipers ■ The windshield wipers and washers can be operated when Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. Vehicles without smart key system The engine switch is in the “ON” position. ■ If no windshield washer fluid sprays ...

160 2-4. Using other driving systems Cruise control ∗ Use cruise control to maintain a set speed without using the acceler- ator. Indicator Cruise control switch ■ Setting the vehicle speed Press the “ON-OFF” button toactivate the cruise control. Press the button once more todeactivate the cruise co...

161 2-4. Using other driving systems 2 Wh en drivin g ■ Cruise control can be set when ● Automatic transmission:The shift lever is in D or 3 (standard type), or in D, 4 or 5 range of S(multi-mode type). ● Vehicle speed is above 25 mph (40 km/h). ■ Adjusting the speed setting Increase speed Decrease ...

162 2-4. Using other driving systems ■ Accelerating The vehicle can be accelerated normally. After acceleration, the set speedresumes. ■ Automatic cruise control cancellation The set speed is automatically canceled in any of the following situations. ● Actual vehicle speed falls more than 10 mph (16...

163 2-4. Using other driving systems 2 Wh en drivin g Driving assist systems When VSC and TRAC are operating If the vehicle is in danger of slip-ping or the front wheels spin, theindicator flashes to indicate thatVSC/TRAC have been engaged. A buzzer (intermittent) sounds toindicate that VSC is opera...

164 2-4. Using other driving systems To disable TRAC and/or VSC If the vehicle gets stuck in fresh snow or mud, TRAC and VSC mayreduce power from the engine to the wheels. You may need to turnthe system off to enable you to rock the vehicle in order to free it. ■ Turning off TRAC Quickly push and re...

165 2-4. Using other driving systems 2 Wh en drivin g ■ Sounds and vibrations caused by ABS, brake assist, VSC and TRAC ● A sound may be heard from the engine compartment when the engine isstarted or just after the vehicle begins to move. This sound does not indi-cate that a malfunction has occurred...

166 2-4. Using other driving systems CAUTION ■ Stopping distance when ABS is operating on the wet or slick roads ABS is not designed to shorten the vehicle's stopping distance. Alwaysmaintain a safe distance from the vehicle in front of you in the following situ-ations. ● When driving on dirt, grave...

166 2-5. Driving information Cargo and luggage Capacity and distribution Cargo capacity depends on the total weight of the occupants. (Cargo capacity) = (Total load capacity) - (Total weight of occupants) Steps for Determining Correct Load Limit ⎯ (1) Locate the statement “The combined weight of occ...

167 2-5. Driving information 2 When drivin g (6) If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine howthis reduces the available cargo and luggage load capacity ofyour vehicle. ( → P. 174) Example on your vehicle Ca...

168 2-5. Driving information CAUTION ■ Storage precautions Observe the following precautions. Failing to do so may result in death or serious injury. ● To prevent cargo and luggage from sliding forward during braking, donot stack anything in the enlarged trunk. Keep cargo and luggage low,as close to...

169 2-5. Driving information 2 When drivin g Vehicle load limits ■ Total load capacity and seating capacity These details are also described on the tire and loading informationlabel. ( → P. 337) CAUTION ■ Overloading the vehicle Do not overload the vehicle.It may not only cause damage to the tires, ...

170 2-5. Driving information Winter driving tips Carry out the necessary preparations and inspections before drivingthe vehicle in winter. Always drive the vehicle in a manner appropri-ate to the prevailing weather conditions. ■ Pre-winter preparations ● Use fluids that are appropriate to the prevai...

171 2-5. Driving information 2 When drivin g Selecting tire chains Vehicles with 15-inch tires Use the tire chains of correct size and type. Use SAE Class “S” type radial tire chains except radial cable chains or V-bar type chains. Vehicles with 16-inch and 17-inch tires Use the correct tire chain s...

172 2-5. Driving information Regulations on the use of snow chains ● Regulations regarding the use of tire chains vary according to loca-tion and type of road. Always check local regulations before install-ing chains. ● Install the chains on the front tires. ● Retighten the chains after driving 1/4 ...

173 2-5. Driving information 2 When drivin g CAUTION ■ Driving with snow tires Observe the following precautions to reduce the risk of accidents.Failing to do so may result in a loss of vehicle control and cause death orserious injury. ● Use tires of the size specified for your vehicle. ● Maintain t...

174 2-5. Driving information Trailer towing Your vehicle is designed primarily as a passenger carrying vehicle.Towing a trailer will have an adverse effect on handling, perfor-mance, braking, durability, and fuel consumption. For your safetyand the safety of others, do not overload the vehicle or tr...

176 2-5. Driving information ■ Before towing ● Ensure that your vehicle’s tires are properly inflated. ( → P. 337) ● Trailer tires should be inflated according to the trailer manufacturer's rec-ommendation. ● All trailer lights must work in order to be legal. ● Confirm all lights work each time you ...

177 2-5. Driving information 2 When drivin g CAUTION ■ To avoid accident or injury ● Do not exceed the trailer hitch assembly weight, gross vehicle weight,gross axle weight and trailer tongue load capacities. ● Never load more weight in the back than in the front of the trailer. About60% of the load...

178 2-5. Driving information Trailer towing tips Your vehicle will handle differently when towing a trailer. The 3 maincauses of vehicle-trailer accidents are driver error, excessive speedand improper trailer loading. Keep the following in mind when towing. ● Before starting out, check the trailer l...

179 2-5. Driving information 2 When drivin g ● Reversing with a trailer attached is difficult and requires practice.Grip the bottom of the steering wheel and move your hand to theleft to move the trailer to the left. Move your hand to the right tomove the trailer to right. (This is generally opposit...

180 2-5. Driving information ● In order to maintain efficient engine braking and electrical chargingperformance, do not use “D” (automatic transmission) or the 5thgear (manual transmission). ● Due to the added load of the trailer, your vehicle's engine mayoverheat on hot days (at temperatures over 8...

181 2-5. Driving information 2 When drivin g CAUTION ■ To avoid an accident ● Do not exceed 45 mph (72 km/h) or posted towing speed limit, whicheveris lower. As instability (swaying) of the towing vehicle-trailer combinationincreases as speed increases, exceeding 45 mph (72 km/h) may causeloss of co...

182 2-5. Driving information Dinghy towing (automatic transmission) NOTICE ■ To avoid serious damage to your vehicle Do not tow your vehicle with four wheels on the ground. Your vehicle is not designed to be dinghy towed (with 4 wheels onthe ground) behind a motor home.

183 2-5. Driving information 2 When drivin g Dinghy towing (manual transmission) Towing your vehicle with 4 wheels on the ground To prevent damage to your vehicle, perform the following proceduresbefore towing. Shift the shift lever to N. Switch to the “ACC” position. ( → P. 130) Ensure that the aud...

184 2-5. Driving information NOTICE ■ Dinghy towing direction ■ To prevent the steering from locking Ensure the engine switch is in the “ACC” position. Do not tow the vehicle backwards. Doing so may cause serious damage.

188 3-1. Using the air conditioning system and defogger Automatic air conditioning system ∗ Using the automatic mode Press . The air conditioning system will begin to operate. Press “ ∧ ” to increase the temperature and “ ∨ ” to decrease the temperature on . Air outlets and fan speed are automatical...

189 3-1. Using the air conditioning system and defogger 3 Interior fe atures Adjusting the settings ■ Adjusting the temperature setting Press “ ∧ ” to increase the temperature and “ ∨ ” to decrease the tem- perature on . ■ Adjusting the fan speed Press “ ∧ ” (increase) or “ ∨ ” (decrease) on . The f...

190 3-1. Using the air conditioning system and defogger Air flows to the upper body andfeet. : Some models Mainly air flows to the feet. : Some models Air flows to the feet and thewindshield defogger operates. Recirculated air mode will auto-matically switch to outside airmode. : Some models ■ Switc...

191 3-1. Using the air conditioning system and defogger 3 Interior fe atures Defogging the windshield Defogging The air conditioning system con-trol operates automatically. Recirculated air mode will auto-matically switch to outside airmode. It is not possible to returnto recirculated air mode when ...

194 3-1. Using the air conditioning system and defogger CAUTION ■ To prevent the windshield from fogging up Do not use during cool air operation in extremely humid weather. The difference between the temperature of the outside air and that of thewindshield can cause the outer surface of the windshie...

195 3-1. Using the air conditioning system and defogger 3 Interior fe atures Manual air conditioning system ∗ Heater Fan speed control dial Air outlet selection dial Air intake mode switch Temperature control dial ∗ : If equipped

196 3-1. Using the air conditioning system and defogger Adjusting the settings ■ Adjusting the temperature setting (heater) Turn the temperature control dial clockwise to increase the temper-ature. ■ Adjusting the temperature setting (air conditioning system) Turn the temperature control dial clockw...

197 3-1. Using the air conditioning system and defogger 3 Interior fe atures ■ Adjusting the fan speed Turn the fan speed control dial clockwise (increase) or counter-clockwise (decrease). Set the dial to “0” to turn the fan off. ■ Selecting the air outlets Set the air outlet selection dial to an ap...

200 3-1. Using the air conditioning system and defogger ■ For quick cooling (vehicles with air conditioning system) Turn the temperature control dial to the “MAX A/C” position and select therecirculated air mode. ■ For quick clearing of the windshield and side windows (vehicles withair conditioning ...

201 3-1. Using the air conditioning system and defogger 3 Interior fe atures CAUTION ■ To prevent the windshield from fogging up Do not set the air outlet selection dial to during cool air operation in extremely humid weather. The difference between the temperature of theoutside air and that of the ...

202 3-1. Using the air conditioning system and defogger Rear window and outside rear view mirror defoggers ■ Outside rear view mirror defoggers (if equipped) Turning the rear window defogger on will turn the outside rear view mirrordefoggers on. CAUTION ■ Outside rear view mirror defoggers (if equip...

202 3-2. Using the audio system Audio system types With navigation system Owners of models equipped with a navigation system should referto the “Navigation System Owner's Manual”. Without navigation system Type A: CD player with changer controller and AM/FM radio Type B: CD player with changer and A...

203 3-2. Using the audio system 3 Interior fe atures ■ Using cellular phones Interference may be heard through the audio system's speakers if a cellularphone is being used inside or close to the vehicle while the audio system isoperating. CAUTION ■ For vehicles sold in U.S.A. and Canada ● Part 15 of...

204 3-2. Using the audio system NOTICE ■ To prevent battery discharge Do not leave the audio system on longer than necessary with the engine off. ■ To avoid damaging the audio system Take care not to spill drinks or other fluids over the audio system.

205 3-2. Using the audio system 3 Interior fe atures Using the radio Setting station presets (excluding XM ® Satellite Radio) Search for desired stations by turning or pressing “ ∧ ” or “ ∨ ” on . Press and hold the button (from to ) the station is to be set to until you hear a beep. Scanning radio ...

206 3-2. Using the audio system ■ Scanning all radio stations within range Press . All stations with reception will be played for 5 seconds each. When the desired station is reached, press once again. XM ® Satellite Radio* (if equipped) ■ Receiving XM ® Satellite Radio Press .The display changes as ...

207 3-2. Using the audio system 3 Interior fe atures ■ Scanning XM ® Satellite Radio channels ● Scanning channels in the current category Press .When the desired channel is reached, press again. ● Scanning preset channels Press and hold until you hear a beep. When the desired channel is reached, pre...

209 3-2. Using the audio system 3 Interior fe atures ■ If XM ® Satellite Radio does not operate normally If a problem occurs with the XM ® tuner, a message will appear on the dis- play. Refer to the table below to identify the problem, and take the suggestedcorrective action. ANTENNA The XM ® antenn...

210 3-2. Using the audio system Contact the XM ® Listener Care Center at 1-800-967-2346 (U.S.A.) or 1-877- 438-9677 (Canada). ■ Certifications for the radio tuner This equipment has been tested and found to comply with the limits for aclass B digital device, pursuant to Part 15 of the FCC Rules. The...

211 3-2. Using the audio system 3 Interior fe atures Using the CD player Loading CDs ■ Loading a CD Type A Insert a CD. Type B Press .Insert a CD when the indicator on the slot turns from amber togreen. Volume Random playback Repeat play Playback Power CD eject Displaying text messages Selectinga tr...

212 3-2. Using the audio system ■ Loading multiple CDs (type B) Press and hold until you hear a beep. Insert a CD when the indicator on the slot turns from amber togreen. The indicator on the slot turns to amber when the CD is inserted. Insert the next CD when the indicator on the slot turns fromamb...

214 3-2. Using the audio system Random playback ■ Current CD Press (RAND). Tracks are played in a random order until is pressed once more. ■ All CDs (type A with a CD changer and type B) Press and hold (RAND) until you hear a beep. Tracks on all loaded CDs are played in a random order until is press...

215 3-2. Using the audio system 3 Interior fe atures ■ Error messages “ERROR”: This indicates a problem either with the CD or inside theplayer. The CD may be dirty, damaged or inserted up-sidedown. “WAIT”: Operation has stopped due to a high temperature inside the player. Wait for a while and then p...

216 3-2. Using the audio system NOTICE ■ CDs and adapters that cannot be used Do not use the following types of CDs, 3 in. (8 cm) CD adapters or DualDiscs.Doing so may damage the CD player and/or the CD insert/eject function. ● CDs that have a diameter that is not 4.7in. (12 cm) ● Low-quality and de...

217 3-2. Using the audio system 3 Interior fe atures NOTICE ■ CD player precautions Failure to follow the precautions below may result in serious damage to theCDs or the player itself. ● Do not insert anything other than CDs into the CD slot. ● Do not apply oil to the CD player. ● Store CDs away fro...

218 3-2. Using the audio system Playing MP3 and WMA discs Loading and ejecting MP3 and WMA discs → P. 211 Selecting a CD (type A with a CD changer and type B) → P. 213 Volume Random playback Selecting a file Playback Power CD eject Selectinga file Selecting a CD CD load(type B only) Repeat play Sear...

222 3-2. Using the audio system ■ MP3 and WMA files MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by usingMP3 compression. WMA (Windows Media TM Audio) is a Microsoft audio compression format. This format compress...

224 3-2. Using the audio system ● Extensions If the file extensions .mp3 and .wma are used for files other than MP3 andWMA files, they will be mistakenly recognized and played as MP3 andWMA files. This may result in large amounts of interference and damageto the speakers. ● Playback • To play MP3 fi...

225 3-2. Using the audio system 3 Interior fe atures Optimal use of the audio system Using the AUDIO CONTROL function ■ Changing sound quality modes Pressing selects the mode to be changed in the following order. “BAS” → “MID”* → “TRE” → “FAD” → “BAL” → “ASL” *: JBL brand audio system Displays the c...

226 3-2. Using the audio system ■ Adjusting sound quality and volume balance Turning adjusts the level. * 1 : The sound quality level is adjusted individually in each radio mode or CD mode. * 2 : JBL brand audio system Mode displayed Sound qual- ity mode Level Turn to the left Turn to the right BAS*...

227 3-2. Using the audio system 3 Interior fe atures ■ Adjusting the Automatic Sound Levelizer (ASL) Except JBL brand audio system When “ASL” is selected, turning to the right changes the “ASL” level in the order of “LOW”, “MID” and “HIGH”. Turning to the left turns “ASL” off. ASL automatically adju...

228 3-2. Using the audio system Using the AUX adapter ■ Operating portable audio devices connected to the audio system The volume can be adjusted using the vehicle's audio controls. All otheradjustments must be made on the portable audio device itself. ■ When using a portable audio device connected ...

229 3-2. Using the audio system 3 Interior fe atures Using the steering wheel audio switches ∗ Turning on the power Press when the audio system is turned off. The audio system can be turned off by holding down until you hear a beep. Some audio features can be controlled using the switches on thestee...

231 3-2. Using the audio system 3 Interior fe atures Selecting a track/file Press to select the CD mode. Press to select the desired track/file. Selecting a folder (type A) Press to select the CD mode. Press and hold until you hear a beep. Selecting a disc (type A with a CD changer and type B) Press...

233 3-3. Using the hands-free phone system (for cellular phone) 3 Interior fe atures ■ Trademark owned by Bluetooth SIG. Inc. ■ Certification for the hands-free phone system NOTE:This device complies with Part 15 of the FCC Rules and RSS-210 of industryCanada. Operation is subject to the following t...

234 3-3. Using the hands-free phone system (for cellular phone) FCC WARNING:Changes or modifications in construction not expressly approved by theparty responsible for compliance could void the user's authority to operatethe equipment. CAUTION: Radio Frequency Radiation Exposure This equipment compl...

235 3-3. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Using the hands-free phone system ∗ (for cellular phone) ■ Audio unit Displays such items asmessage, name, and phonenumber Lower-case characters andspecial characters, such as anumlaut, cannot be displayed. Selects ...

236 3-3. Using the hands-free phone system (for cellular phone) ■ Steering wheel Volume The voice guidance volumecannot be adjusted by usingthis button. Hands-free phone systemon/starts a call (off-hookswitch)Hands-free phone systemoff/ends a call/refuses a call(on-hook switch)Press: Voice command s...

237 3-3. Using the hands-free phone system (for cellular phone) 3 Interior fe atures ■ Microphone Vehicles with moon roof Vehicles without moon roof

238 3-3. Using the hands-free phone system (for cellular phone) Operating the system by using a voice command By following voice guidance instructions output from the speaker,voice commands can be given to allow for operation of the hands- free phone system without checking the display or operating ...

239 3-3. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Using the hands-free phone system for the first time Before using the hands-free phone system, it is necessary to registera cellular phone in the system. The phone registration mode will beentered automatically when...

242 3-3. Using the hands-free phone system (for cellular phone) ■ Using a short cut key First menu Second menu Operation detail Dial “XXX (name)” - Dialing a number registered in the phone book Phone book add entry - Adding a new number Phone book change name - Changing the name of a phone number in...

243 3-3. Using the hands-free phone system (for cellular phone) 3 Interior fe atures ■ Automatic adjustment of volume When vehicle speed is 50 mph (80 km/h) or more, the volume automaticallyincreases. The volume returns to the previous volume setting when vehiclespeed drops to 43 mph (70 km/h) or le...

244 3-3. Using the hands-free phone system (for cellular phone) Making a phone call Dialing by inputting a number Press the talk switch and say “Dial by number”.Press the talk switch and say the phone number.Dial by one of the following methods:a. Press the off-hook switch.b. Press the talk switch a...

245 3-3. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Dialing by inputting a name Press the talk switch and say “Dial by name”.Select a registered name to be input by either of the followingmethods:a. Press the talk switch and say a registered name.b. Press the talk sw...

247 3-3. Using the hands-free phone system (for cellular phone) 3 Interior fe atures The following operations can be performed: Dialing: Press the off-hook switch or select “Dial” by using a voice command or . Storing the number in the phone book: Select “Store” by using a voice command or . Deletin...

248 3-3. Using the hands-free phone system (for cellular phone) Setting a cellular phone Registering a cellular phone Select “Pair Phone” by using a voice command or , and do the procedure for registering a cellular phone. ( → P. 239) Registering a cellular phone in the hands-free phone system allow...

249 3-3. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Selecting the cellular phone to be used Select “Select Phone” by using a voice command or . Pattern A Select the cellular phone to be used by either of the followingmethods, and select “Confirm” by using a voice com...

250 3-3. Using the hands-free phone system (for cellular phone) Press the talk switch or select “Record Name” by using , and say a new name. Select “Confirm” by using a voice command or . Listing the registered cellular phones Selecting “List Phones” by using a voice command or causes the list of re...

251 3-3. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Deleting a cellular phone Select “Delete” by using a voice command or . Pattern A Select the cellular phone to be deleted by either of the follow-ing methods and select “Confirm” by using a voice command or : a. Pre...

252 3-3. Using the hands-free phone system (for cellular phone) Changing the passkey Select “Set Passkey” by using a voice command or . Pattern A Press the talk switch, say a 4 to 8-digit number, and select “Confirm” by using a voice command or . Pattern B Select a 4 to 8-digit number by using . The...

253 3-3. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Security and system setup Setting or changing the PIN ■ Setting a PIN Select “Set PIN” by using a voice command or . Enter a PIN by using a voice command or . When using , input the code 1 digit at a time. To enter ...

254 3-3. Using the hands-free phone system (for cellular phone) ■ Changing the PIN Select “Set PIN” by using a voice command or . Enter the registered PIN by using a voice command or . Enter a new PIN by using a voice command or . When using , input the code 1 digit at a time. Locking or unlocking t...

255 3-3. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Setting voice guidance volume Select “Guidance Vol” by using . Change the voice guidance volume. To decrease the volume: Turn counterclockwise. To increase the volume: Turn clockwise. Initialization Select “Initiali...

257 3-3. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Using the phone book Adding a new phone number The following methods can be used to add a new phone number: ● Inputting a phone number by using a voice command ● Transferring data from the cellular phone ● Inputting...

258 3-3. Using the hands-free phone system (for cellular phone) ■ Adding procedure Select “Add Entry” by using a voice command or . Use one of the following methods to input a telephone num-ber: Inputting a telephone number by using a voice command STEP2-1 Select “By Voice” by using a voice command ...

260 3-3. Using the hands-free phone system (for cellular phone) Select the name to be registered by either of the followingmethods, and select “Confirm” by using a voice command or : a. Press the talk switch and say the desired name. b. Select “Record Name” by using , and say the desired name. Selec...

261 3-3. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Select the desired preset button, and register the data intospeed dial by either of the following methods:a. Press the desired preset button, and select “Confirm” by using a voice command or . b. Press and hold the ...

263 3-3. Using the hands-free phone system (for cellular phone) 3 Interior fe atures Listing the registered data Selecting “List names” by using a voice command causes a list of theregistered data to be read aloud. When listing is complete, the system returns to “Phonebook”.Pressing the talk switch ...

264 3-4. Using the interior lights Interior lights list Interior light ( → P. 266) Personal lights or personal/interior lights ( → P. 266, 267) “ENGINE START STOP” switch light (vehicles with smart keysystem)

265 3-4. Using the interior lights 3 Interior fe atures ■ Illuminated entry system Vehicles without moon roof The interior light (with the switch in the “DOOR” position) and “ENGINESTART STOP” switch light (vehicles with smart key system) automaticallyturn on/off according to “ENGINE START STOP” swi...

266 3-4. Using the interior lights Interior light “DOOR” positionOffOn Personal lights (vehicles without moon roof) On/off Interior light and personal lights

267 3-4. Using the interior lights 3 Interior fe atures Personal/interior lights (vehicles with moon roof) ■ Interior lights “DOOR” positionOffOn ■ Personal lights On/off Personal/interior lights

268 3-5. Using the storage features List of storage features CAUTION ■ Items that should not be left in the storage spaces Do not leave glasses, lighters or spray cans in the storage spaces, as thismay cause the following when cabin temperature becomes high: ● Glasses may be deformed by heat or crac...

269 3-5. Using the storage features 3 Interior fe atures Glove box Pull up the lever. Console box Type A Lift the lid while pulling the lever. CAUTION ■ Caution while driving Keep the glove box closed.Injuries may result in the event of an accident or sudden braking. Glove box and console box

270 3-5. Using the storage features Type B Lift the lid while pulling the lever. Lift the lid and tray.Lift the lid. Pull the tray up to open the box. ■ When using the console box lid as an armrest (type B only) CAUTION ■ Caution while driving Keep the console box closed.Injuries may result in the e...

272 3-5. Using the storage features ■ Using the cup support (front) ■ Using the cup holder (front) to store small items CAUTION ■ Items unsuitable for the cup holder Do not place anything other than cups or aluminum cans in the cup holders.Other items may be thrown out of the holders in the event of...

273 3-5. Using the storage features 3 Interior fe atures Auxiliary boxes Type A Pull up the lever. Type B (if equipped) Pull the lid. Type C (vehicles with moon roof) Push the lid. Auxiliary boxes

275 3-5. Using the storage features 3 Interior fe atures Bottle holders Front Rear CAUTION ■ Items unsuitable for the bottle holder Do not place anything other than pet bottles in the bottle holders.Other items may be thrown out of the holders in the event of an accident orsudden braking and cause i...

276 3-6. Other interior features Sun visors Forward position: Flip down.Side position: Flip down, unhook, andswing to the side.

277 3-6. Other interior features 3 Interior fe atures Vanity mirrors Slide the cover.

278 3-6. Other interior features Clock ■ The clock is displayed when Vehicles with smart key system The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ONmode. Vehicles without smart key system The engine switch is in the “ACC” or “ON” position. ■ When disconnecting and reconnecting battery t...

279 3-6. Other interior features 3 Interior fe atures Grocery bag hook NOTICE ■ Grocery bag hook weight capacity Do not hang any object heavier than 7 lb. (3 kg) on the grocery bag hook. This hook is designed to hang things like grocery bag.

280 3-6. Other interior features Ashtray ∗ CAUTION ■ When not in use Keep the ashtray closed.Injuries may result in the event of sudden braking, sudden swerving or anaccident. ■ To prevent fire ● Fully extinguish matches and cigarettes before putting them in the ashtray,then make sure the ashtray is...

281 3-6. Other interior features 3 Interior fe atures Cigarette lighter ∗ ■ The cigarette lighter can be used when Vehicles with smart key system The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ONmode. Vehicles without smart key system The engine switch is in the “ACC” or “ON” position. C...

282 3-6. Other interior features Power outlet ■ The power outlet can be used when Vehicles with smart key system The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ONmode. Vehicles without smart key system The engine switch is in the “ACC” or “ON” position. The power outlet can be used for 1...

283 3-6. Other interior features 3 Interior fe atures NOTICE ■ To avoid damaging the power outlet Close the power outlet lid when the power outlet is not in use.Foreign objects or liquids that enter the power outlet may cause a short cir-cuit. ■ To prevent the fuse from being blown Do not use an acc...

284 3-6. Other interior features Seat heaters ∗ ■ The seat heaters can be used when Vehicles with smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. Vehicles without smart key system The engine switch is in the “ON” position. CAUTION ■ Burns ● Use caution when seating the follow...

285 3-6. Other interior features 3 Interior fe atures NOTICE ■ To prevent seat heater damage Do not put unevenly weighted objects on the seat and do not stick sharpobjects (needles, nails, etc.) into the seat. ■ To prevent battery discharge Turn the switches off when the engine is not running.

286 3-6. Other interior features Armrest ∗ NOTICE ■ To prevent damage to the armrest Do not place too much strain on the armrest. Pull the armrest down for use. ∗ : If equipped

287 3-6. Other interior features 3 Interior fe atures Floor mat CAUTION Observe the following precautions. Failure to do so may cause the driver's floor mat to slip, possibly interferingwith the pedals while driving. An unexpectedly high speed may result or it maybecome difficult to stop the vehicle...

288 3-6. Other interior features Trunk features ■ Storage box ■ Cargo hooks (if equipped) Cargo hooks are provided forsecuring loose items.

289 3-6. Other interior features 3 Interior fe atures Compass ∗ The compass on the inside rear view mirror indicates the direction inwhich the vehicle is heading. ■ Operation To turn the compass on or off,press and hold “AUTO” for 3seconds. ■ Displays and directions Display Direction N North NE Nort...

290 3-6. Other interior features Calibrating the compass The direction display deviates from the true direction determined bythe earth’s magnetic field. The amount of deviation varies accordingto the geographic position of the vehicle. If you cross over a map boundary shown in the illustration, the ...

291 3-6. Other interior features 3 Interior fe atures ■ Circling calibration Stop the vehicle in a place where it is safe to drive in a circle. Press and hold “AUTO” for 9seconds. C appears on the compass dis-play. Drive the vehicle at 5 mph (8 km/h) or less in a circle until adirection is displayed...

292 3-6. Other interior features CAUTION ■ While driving the vehicle Do not adjust the display. Be sure to adjust the display only when the vehicleis stopped. ■ When doing the circling calibration Be sure to secure a wide space, and watch out for people and vehicles in theneighborhood. Do not violat...

294 4-1. Maintenance and care Cleaning and protecting the vehicle exterior ■ Automatic car washes ● Fold the mirrors back before washing the vehicle. ● Brushes used in automatic car washes may scratch the vehicle surfaceand harm your vehicle’s paint. ■ High pressure car washes ● Do not allow the noz...

295 4-1. Maintenance and care 4 Mainten ance an d ca re ■ To prevent deterioration and body corrosion ● Wash the vehicle immediately in the following cases: • After driving near the sea coast• After driving on salted roads• If you see coal tar or tree sap on the paint surface• If you see dead insect...

296 4-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle's interior andkeep it in top condition: ■ Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty sur-faces with a cloth dampened with lu...

297 4-1. Maintenance and care 4 Mainten ance an d ca re ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a yearto maintain the quality of the vehicle's interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use...

298 4-1. Maintenance and care NOTICE ■ Cleaning detergents ● Do not use organic substances such as benzene or gasoline, acidic oralkaline solutions, dye, bleach or other detergent. Doing so may discolorthe vehicle interior or cause streaks or damage to painted surfaces. ● Do not use polish wax or po...

299 4 Mainten ance an d ca re 4-2. Maintenance Maintenance requirements ■ Repair and replacement It is recommended that genuine Toyota parts be used for repair to ensureperformance of each system. If non-Toyota parts are used in replacement orif a repair shop other than a Toyota dealer performs repa...

300 4-2. Maintenance ■ Allow inspection and repairs to be performed by a Toyota dealer ● Toyota technicians are well-trained specialists and are kept up to datewith the latest service information. They are well informed about theoperations of all systems on your vehicle. ● Keep a copy of the repair ...

301 4-2. Maintenance 4 Mainten ance an d ca re General maintenance Engine compartment Items Check points Battery Check the connections. ( → P. 324) Brake fluid At the correct level? ( → P. 321) Engine coolant At the correct level? ( → P. 320) Engine oil At the correct level? ( → P. 316) Exhaust syst...

302 4-2. Maintenance Vehicle interior Items Check points Accelerator pedal • Moves smoothly (without uneven pedal effort or catching)? Automatic transmission “Park” mechanism • Can the vehicle be held securely on an incline with the shift lever in P? Brake pedal • Moves smoothly?• Does it have appro...

303 4-2. Maintenance 4 Mainten ance an d ca re Vehicle exterior Items Check points Doors/trunk • Operate smoothly? Engine hood • The lock system works properly? Fluid leaks • Is there any leakage after park- ing? Tires • Inflation pressure is correct?• Tire surfaces not worn or dam- aged? • Tires ro...

304 4-2. Maintenance Emission inspection and maintenance (I/M) programs Some states have vehicle emission inspection programs whichinclude OBD (On Board Diagnostics) checks. The OBD system moni-tors the operation of the emission control system. ■ If the malfunction indicator lamp comes on The OBD sy...

306 4-3. Do-it-yourself maintenance Items Parts and tools Fuses ( → P. 350) • Fuse with same amperage rating as original Radiator and condenser ( → P. 321) ⎯ Tire inflation pressure ( → P. 337) • Tire pressure gauge• Compressed air source Washer fluid ( → P. 327) • Water washer fluid containing anti...

307 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION The engine compartment contains many mechanisms and fluids that maymove suddenly, become hot, or become electrically energized. To avoid deathor serious injury observe the following precautions. ■ When working on the engine compar...

308 4-3. Do-it-yourself maintenance NOTICE ■ If you remove the air cleaner Driving with the air cleaner removed may cause excessive engine wear dueto dirt in the air. Also, a backfire could cause a fire in the engine compart-ment.

309 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood release lever. The hood will pop up slightly. Lift the auxiliary catch leverand lift the hood. Hold the hood open by insert-ing the supporting rod into t...

310 4-3. Do-it-yourself maintenance CAUTION ■ Pre-driving check Check that the hood is fully closed and locked.If the hood is not locked properly, it may open while the vehicle is in motionand cause an accident, which may result in death or serious injury. ■ After installing the support rod into the...

311 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Positioning a floor jack When raising your vehicle with a floor jack, position the jack cor-rectly. Improper placement may damage your vehicle or cause injury. ■ Front 1.8 L 4-cylinder (2ZR-FE) engine 2.4 L 4-cylinder (2AZ-FE) engine ■ Re...

313 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION ■ When raising your vehicle Make sure to observe the following to reduce the possibility of death or seri-ous injury. ● Do not use the jack that was supplied with your vehicle. ● Do not put any part of your body or get underneath ...

317 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re 2.4 L 4-cylinder (2AZ-FE) engine LowFull ■ Adding engine oil If the oil level is below or nearthe low level mark, add engineoil of the same type as already inthe engine. Make sure to check the oil type and prepare the items needed beforea...

318 4-3. Do-it-yourself maintenance ■ Engine oil consumption ● The amount of engine oil consumed depends on the oil viscosity, thequality of the oil and the way the vehicle is driven. ● More oil is consumed under driving conditions such as high speeds andfrequent acceleration and deceleration. ● A n...

319 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION ■ Used engine oil ● Used engine oil contains potentially harmful contaminants which maycause skin disorders such as inflammation or skin cancer, so care shouldbe taken to avoid prolonged and repeated contact. To remove used engine...

320 4-3. Do-it-yourself maintenance Engine coolant The coolant level is satisfactory if it is between the “FULL” and “LOW”lines on the reservoir when the engine is cold. Reservoir cap“FULL”“LOW” If the level is on or below the“LOW” line, add coolant up to the“FULL” line. ( → P. 416) ■ If the coolant...

321 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Radiator and condenser Check the radiator and condenser and remove any foreign objects. If any of the above parts are extremely dirty or you are not sure oftheir condition, have your vehicle checked by your Toyota dealer. Brake fluid ■ Ch...

322 4-3. Do-it-yourself maintenance ■ Adding fluid Make sure to check the fluid type and prepare the necessary items. Disconnect the claws to removethe service cover as shown inthe illustration. Remove the reservoir cap. Add brake fluid slowly while checking the fluid level. Fluid type FMVSS No.116 ...

323 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION ■ When filling the reservoir Take care because brake fluid can harm your hands or eyes and damagepainted surfaces.If fluid gets in your eyes, flush your eyes with clean water immediately. If you still experience discomfort, see a ...

324 4-3. Do-it-yourself maintenance Battery Check the battery as follows. ■ Battery exterior Make sure that the battery terminals are not corroded and thatthere are no loose connections, cracks, or loose clamps. TerminalsHold-down clampGround cable ■ Checking battery fluid (vehicles with the battery...

325 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Type B Green: Good conditionDark: Charging is necessary.Have the vehicle inspected byyour Toyota dealer.Clear or light yellow: Notworking properly. Have thevehicle checked by yourToyota dealer. ■ Before recharging When recharging, the bat...

326 4-3. Do-it-yourself maintenance CAUTION ■ Chemicals in the battery A battery contains poisonous and corrosive sulfuric acid and may producehydrogen gas which is flammable and explosive. To reduce the risk of deathor serious injury, take the following precautions while working on or near thebatte...

327 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Washer fluid For vehicles sold in U.S.A. Check the washer fluid level onthe level gauge. If the washerfluid level is at “LOW”, addwasher fluid. For vehicles sold in Canada If any washer does not work or the low windshield washer fluid lev...

328 4-3. Do-it-yourself maintenance NOTICE ■ Do not use any fluid other than washer fluid Do not use soapy water or engine antifreeze instead of washer fluid. Doing so may cause streaking on the vehicle’s painted surfaces. ■ Diluting washer fluid Dilute washer fluid with water as necessary. Refer to...

329 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Tires Replace or rotate tires in accordance with maintenance sched-ules and treadwear. ■ Checking tires New treadTreadwear indicatorWorn tread The location of treadwearindicators is shown by the“TWI” or “ ” marks, etc., molded on the side...

330 4-3. Do-it-yourself maintenance Installing tire pressure warning valves and transmitters When replacing tires or wheels, tire pressure warning valves andtransmitters must also be installed. When new tire pressure warning valves and transmitters areinstalled, new tire pressure warning valve and t...

331 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Push and hold the tire pressurewarning reset switch until the tirepressure warning light blinksslowly 3 times. Vehicles with smart key system: Wait for a few minutes withthe IGNITION ON mode, and then turn the “ENGINE STARTSTOP” switch OF...

332 4-3. Do-it-yourself maintenance ■ When to replace your vehicle’s tires Tires should be replaced if: ● You have tire damage such as cuts, splits, cracks deep enough toexpose the fabric, or bulges indicating internal damage ● A tire goes flat repeatedly or cannot be properly repaired due to thesiz...

333 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Low profile tires (vehicles with 17-inch tires) Generally, low profile tires will wear more rapidly and tire grip perfor-mance will be reduced on snowy and/or icy roads when compared tostandard tires. Be sure to use snow tires or tire c...

335 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION ■ When inspecting or replacing tires Observe the following precautions to prevent accidents. Failure to do somay cause damage to parts of the drive train, as well as dangerous han-dling characteristics, which may lead to an accide...

336 4-3. Do-it-yourself maintenance NOTICE ■ Repairing or replacing tires, wheels, tire pressure warning valves,transmitters and tire valve caps ● When removing or fitting the wheels, tires or the tire pressure warningvalves and transmitters, contact your Toyota dealer as the tire pres-sure warning ...

337 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Tire inflation pressure ■ Tire inflation pressure The recommended cold tire inflation pressure and tire size is dis-played on the tire and loading information label. ( → P. 434) Type A Type B

339 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Tire inflation pressure check interval You should check tire inflation pressure every two weeks, or at leastonce a month.Do not forget to check the spare. ■ Inspection and adjustment procedure Tire valveTire pressure gauge Remove the ti...

340 4-3. Do-it-yourself maintenance ■ Effects of incorrect tire inflation pressure Driving with incorrect tire inflation pressure may result in the following: ● Reduced fuel efficiency ● Reduced driving comfort and tire life ● Reduced safety ● Damage to the drive train If a tire needs frequent refil...

341 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re CAUTION ■ Proper inflation is critical to save tire performance Keep your tires properly inflated. Otherwise, the following conditionsmay occur and result in an accident causing death or serious injury. ● Excessive wear ● Uneven wear ● Po...

342 4-3. Do-it-yourself maintenance Wheels If a wheel is bent, cracked or heavily corroded, it should bereplaced.Otherwise, the tire may separate from the wheel or cause loss ofhandling control. ■ Wheel selection When replacing wheels, care should be taken to ensure thatthey are equivalent to those ...

343 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ When replacing wheels The wheels of your Toyota, except for the compact spare tire, areequipped with tire pressure warning valves and transmitters that allowthe tire pressure warning system to provide advanced warning in theevent of a l...

344 4-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain airconditioning efficiency. ■ Removal method Vehicles with smart key system: Turn the “ENGINE STARTSTOP” switch OFF.Vehicles without smart key system: Turn the engine switchO...

345 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Checking interval Replace the air conditioning filter according to the maintenance schedule. Industy areas or areas with heavy traffic flow, early replacement may berequired. (For scheduled maintenance information, please refer to the“S...

346 4-3. Do-it-yourself maintenance Key battery Replace the battery with a new one if it is discharged. ■ You will need the following items: ● Flathead screwdriver (To prevent damage to the key, coverthe tip of the screwdriver with a rag.) ● Small Phillips-head screwdriver ● Lithium battery Vehicles...

347 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Remove the depleted battery. Insert a new battery with the“+” terminal facing up. ■ Replacing the battery (vehicles without smart key system) Remove the cover. Remove the module. STEP 3 STEP 1 STEP 2

349 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ If the key battery is discharged The following symptoms may occur. ● The smart key system and wireless remote control will not function prop-erly. ● The operational range is reduced. ■ Use the following types of lithium battery Vehicles...

350 4-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may haveblown. If this happens, check and replace the fuses as necessary. Vehicles with smart key system: Turn the “ENGINE STARTSTOP” switch OFF.Vehicles without smart key syst...

351 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Driver’s side instrument panel Remove the instrument panel. After a system failure, see “Fuse layout and amperage rat-ings” ( → P. 354) for details about which fuse to check. Take out the pullout tool. Only type A fuse can beremoved using...

353 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Type C Normal fuseBlown fuse Contact your Toyota dealer. Type D Normal fuseBlown fuse Contact your Toyota dealer.

357 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Under the driver’s side instrument panel Fuse Ampere Circuit 1 DEF 40 A Rear window defogger, MIR HTR 2 PWR SEAT 30 A Power seat 3 TAIL 10 A Parking lights, tail lights, license plate lights, front side marker lights, multiport fuel inj...

359 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ After a fuse is replaced ● If the lights do not turn on even after the fuse has been replaced, a bulbmay need replacing. ( → P. 360) ● If the replaced fuse blows again, have the vehicle inspected by yourToyota dealer. ■ If there is an o...

360 4-3. Do-it-yourself maintenance Light bulbs You may replace the following bulbs yourself. The difficulty level ofreplacement varies depending on the bulb. If necessary bulbreplacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs, ...

361 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ Rear bulb locations Stop/tail and rear side marker lights Rear turn signal lights Back-up lights License plate lights

363 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Unplug the bulb while depress-ing the lock release. ■ Front fog lights (if equipped) Remove the fender liner boltsand clip. Partly remove the fender liner. Turn the bulb base counterclock-wise. STEP 2 STEP 1 STEP 2 STEP 3

364 4-3. Do-it-yourself maintenance Unplug the bulb while depress-ing the lock release. ■ Front turn signal/parking lights and front side marker lights Turn the steering wheel away from the side being worked on.This will move the tire to provide more room. Remove the fender liner clips. STEP 4 STEP ...

365 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re Partly remove the fender linerand turn the bulb base counter-clockwise. Front side marker lightFront turn signal/parking light Remove the light bulb. Front side marker lightFront turn signal/parking light STEP 3 STEP 4

368 4-3. Do-it-yourself maintenance Remove the light bulb. ■ License plate lights Open the trunk lid and removethe trunk panel cover clips. Partly remove the trunk panelcover and turn the bulb basecounterclockwise. Remove the light bulb. STEP 3 STEP 1 STEP 2 STEP 3

369 4-3. Do-it-yourself maintenance 4 Mainten ance an d ca re ■ LED high mounted stoplight The high mounted stoplight consists of a number of LEDs. If any ofthe LEDs burn out, take your vehicle to your Toyota dealer to havethe light replaced. ■ Condensation build-up on the inside of the lens Contact...

372 5-1. Essential information Emergency flashers NOTICE ■ To prevent battery discharge Do not leave the emergency flashers on longer than necessary when theengine is not running. Use the emergency flashers if the vehicle malfunctions or isinvolved in an accident. Press the switch to flash allthe tu...

5 W hen tr ou ble ar ises 373 5-1. Essential information If your vehicle needs to be towed Before towing The following may indicate a problem with your transmission. Contactyour Toyota dealer before towing. ● The engine is running, but the vehicle will not move. ● The vehicle makes an abnormal sound...

374 5-1. Essential information Emergency towing If a tow truck is not available, in an emergency your vehicle may betemporarily towed using a cable or chain secured to the emergencytowing eyelet. This should only be attempted on hard surfaced roadsfor short distances at low speeds.A driver must be i...

5 W hen tr ou ble ar ises 375 5-1. Essential information ■ Emergency towing procedure Release the parking brake. Shift the shift lever to N. Vehicles with smart key system Turn the “ENGINE START STOP” switch to ACCESSORY (engineoff) or IGNITION ON (engine running) mode. Vehicles without smart key sy...

376 5-1. Essential information Towing with a sling-type truck Towing with a wheel-lift type truck from the front Release the parking brake. NOTICE ■ To prevent body damage Do not tow with a sling-type truck, either from the front or rear. NOTICE ■ To prevent damaging the vehicle When raising the veh...

5 W hen tr ou ble ar ises 377 5-1. Essential information Towing with a wheel-lift type truck from the rear Automatic transmission: Use atowing dolly under the frontwheels. Manual transmission: We recom-mend to use a towing dolly underthe front wheels. When not using a towing dolly,turn the engine sw...

378 5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probablyneeds adjustment or repair. Contact your Toyota dealer as soon aspossible. ■ Visible symptoms ● Fluid leaks under the vehicle(Water dripping from the air conditioning afte...

5 W hen tr ou ble ar ises 379 5-1. Essential information Fuel pump shut off system Follow the procedure below to restart the engine after the system isactivated. Vehicles with smart key system Turn the “ENGINE START STOP” switch OFF.Restart the engine. Vehicles without smart key system Turn the engi...

380 5-1. Essential information Event data recorder In a crash or a near car crash event The SRS airbag sensor assembly contains the EDR. In a crash or anear car crash event, this device may record some or all of the follow-ing information: ● Engine speed ● Whether the brake pedal was applied or not ...

5 W hen tr ou ble ar ises 381 5-1. Essential information Disclosure of the data Toyota will not disclose the data recorded in an EDR to a third partyexcept when: ● An agreement from the vehicle's owner (or the leasing company fora leased vehicle) is obtained ● Officially requested by the police or o...

382 5-2. Steps to take in an emergency If a warning light turns on or a warning buzzer sounds... Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous. The following warning indicates a possible problem in the brake sys-tem. Immediately stop the vehicle in a safe place and c...

5 W hen tr ou ble ar ises 383 5-2. Steps to take in an emergency Have the vehicle inspected immediately. Failing to investigate the cause of the following warnings may lead tothe system operating abnormally and possibly cause an accident.Have the vehicle inspected by your Toyota dealer immediately. ...

384 5-2. Steps to take in an emergency Follow the correction procedures. After taking the specified steps to correct the suspected problem,check that the warning light turns off. ■ If the malfunction indicator lamp comes on while driving First check the following: ● Is the fuel tank empty?If it is, ...

386 5-2. Steps to take in an emergency ■ Front passenger detection sensor and passenger seat belt reminder ● If luggage is placed on the front passenger seat, the front passengerdetection sensor may cause the warning light to flash, even if a passen-ger is not sitting in the seat. ● If a cushion is ...

5 W hen tr ou ble ar ises 387 5-2. Steps to take in an emergency ■ When a tire is replaced with a spare tire The compact spare tire is not equipped with the tire pressure warningvalve and transmitter. If a tire goes flat, the tire pressure warning light willnot turn off even though the flat tire is ...

388 5-2. Steps to take in an emergency ■ If the tire pressure warning light comes on after blinking for 1minute frequently If the tire pressure warning light comes on after blinking for 1 minute fre-quently when the “ENGINE START STOP” switch or engine switch isturned ON, have it checked by your Toy...

5 W hen tr ou ble ar ises 389 5-2. Steps to take in an emergency CAUTION ■ Maintenance of the tires Each tire, including the spare (if provided), should be checked monthlywhen cold and inflated to the inflation pressure recommended by thevehicle manufacturer on the vehicle placard or tire inflation ...

390 5-2. Steps to take in an emergency CAUTION Your vehicle has also been equipped with a TPMS (tire pressure warningsystem) malfunction indicator to indicate when the system is not operat-ing properly. The TPMS (tire pressure warning system) malfunction indi-cator is combined with the low tire pres...

5 W hen tr ou ble ar ises 391 5-2. Steps to take in an emergency Follow the correction procedures. (vehicles with smart key system) After taking the specified steps to correct the suspected problem,check that the warning light turns off. Interiorbuzzer Exteriorbuzzer Warning light Warning light/Deta...

5 W hen tr ou ble ar ises 393 5-2. Steps to take in an emergency If you have a flat tire Remove the flat tire and replace it with the spare provided. ■ Before jacking up the vehicle ● Stop the vehicle on a hard, flat surface. ● Set the parking brake. ● Shift the shift lever to P (automatic transmiss...

394 5-2. Steps to take in an emergency Taking out the jack Remove the luggage floor cover. TightenLoosen STEP 1 STEP 2

5 W hen tr ou ble ar ises 395 5-2. Steps to take in an emergency Taking out the spare tire Remove the luggage floor cover. Remove the tool tray. Loosen the center fastener thatsecures the spare tire. STEP 1 STEP 2 STEP 3

396 5-2. Steps to take in an emergency Replacing a flat tire Chock the tires. Vehicles with a steel wheel,remove the wheel ornamentusing the wrench. To protect the wheel ornament,place a rag between the wrenchand the wheel ornament, asshown in the illustration. STEP 1 Flat tire Wheel chock positions...

398 5-2. Steps to take in an emergency Raise the vehicle until the tire isslightly raised off the ground. Remove all the wheel nuts andthe tire. When resting the tire on theground, place the tire so that thewheel design faces up to avoidscratching the wheel surface. Installing the tire Remove any di...

5 W hen tr ou ble ar ises 399 5-2. Steps to take in an emergency Install the tire and loosely tighten each wheel nut by hand byapproximately the same amount. Replacing a steel wheel with a compact spare tire Tighten the nuts until the taperedportion comes into loose contactwith the disc wheel seat. ...

400 5-2. Steps to take in an emergency Firmly tighten each nut two orthree times in the order shown inthe illustration. Tightening torque: 76 ft•lbf (103 N•m, 10.5 kgf•m) Stow the flat tire, tire jack and all tools. STEP 4 ■ The compact spare tire ● The compact spare tire is identified by the label ...

5 W hen tr ou ble ar ises 401 5-2. Steps to take in an emergency CAUTION ■ Using the tire jack Improper use of the tire jack may lead to death or serious injuries due tothe vehicle suddenly falling off the jack. ● Do not use the tire jack for any purpose other than replacing tires orinstalling and r...

402 5-2. Steps to take in an emergency CAUTION ■ Replacing a flat tire Observe the following precautions to reduce the risk of death or seriousinjury: ● Never use oil or grease on the wheel bolts or wheel nuts.Oil and grease may cause the wheel nuts to be excessively tightened,leading to bolt or dis...

5 W hen tr ou ble ar ises 403 5-2. Steps to take in an emergency CAUTION ■ When the spare tire is attached The vehicle speed may not be correctly detected, and the following sys-tems may not operate correctly: ● ABS & Brake assist ● VSC (if equipped) ● TRAC (if equipped) ● Navigation system (if ...

404 5-2. Steps to take in an emergency If the engine will not start If the engine still does not start after following the correct startingprocedure ( → P. 126, 130) or releasing the steering lock ( → P. 128, 132), confirm the following points. ■ The engine will not start even when the starter motor...

5 W hen tr ou ble ar ises 405 5-2. Steps to take in an emergency Emergency start function (vehicles with smart key system) When the engine does not start, the following steps can be used asan interim measure to start the engine if the “ENGINE START STOP”switch is functioning normally. Set the parkin...

5 W hen tr ou ble ar ises 407 5-2. Steps to take in an emergency If you lose your keys New genuine keys can be made by your Toyota dealer. For vehicleswith the smart key system, bring the other key and the key numberstamped on the key number plate. For vehicles without the smart keysystem, bring a m...

408 5-2. Steps to take in an emergency If the electronic key does not operate properly (vehicles with smart key system) Locking and unlocking the doors and opening the trunk with themechanical key Doors Using the mechanical key ( → P. 21) in order to perform the fol-lowing operations. Locks all door...

5 W hen tr ou ble ar ises 409 5-2. Steps to take in an emergency Changing “ENGINE START STOP” switch modes and starting the engine Shift the shift lever to P and apply the brakes. Touch the Toyota emblem side ofthe electronic key to the“ENGINE START STOP” switch. An alarm will sound to indicatethat ...

410 5-2. Steps to take in an emergency If the battery is discharged The following procedures may be used to start the engine if the vehi-cle's battery is discharged.You can call your Toyota dealer or qualified repair shop. If you have a set of jumper (or booster) cables and a second vehi-cle with a ...

5 W hen tr ou ble ar ises 411 5-2. Steps to take in an emergency Connecting the jumper cables Positive (+) battery terminal on your vehiclePositive (+) battery terminal on the second vehicleNegative (-) battery terminal on the second vehicleConnect the jumper cable to ground on your vehicle as shown...

5 W hen tr ou ble ar ises 413 5-2. Steps to take in an emergency ■ Avoiding a discharged battery ● Turn off the headlights and the audio system while the engine is turnedoff. ● Turn off any unnecessary electrical components when the vehicle is run-ning at a low speed for an extended period, such as ...

414 5-2. Steps to take in an emergency CAUTION ■ Avoiding battery fires or explosions Observe the following precautions to prevent accidentally igniting the flam-mable gas that may be emitted from the battery. ● Make sure the jumper cable is connected to the correct terminal and that itis not uninte...

5 W hen tr ou ble ar ises 415 5-2. Steps to take in an emergency NOTICE ■ To prevent damage to the vehicle Do not pull- or push-start the vehicle, because the catalytic converter mayoverheat and become a fire hazard. ■ When handling jumper cables Be careful that the jumper cables do not become tangl...

416 5-2. Steps to take in an emergency If your vehicle overheats If your engine overheats: Stop the vehicle in a safe place and turn off the air condi-tioning system.Check to see if steam is coming out from under the hood.If you see steam: Stop the engine. Carefully lift the hood after the steamsubs...

5 W hen tr ou ble ar ises 417 5-2. Steps to take in an emergency ■ Overheating If you observe the following, your vehicle may be overheating. ● The engine coolant temperature gauge enters the red zone or a loss ofpower is experienced. ● Steam is coming from under the hood. CAUTION ■ To prevent an ac...

5 W hen tr ou ble ar ises 419 5-2. Steps to take in an emergency If the vehicle becomes stuck CAUTION ■ When attempting to free a stuck vehicle If you choose to rock the vehicle back and forth to free it, make sure the sur-rounding area is clear, to avoid striking other vehicles, objects or persons....

420 5-2. Steps to take in an emergency If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop thevehicle in the normal way, stop the vehicle using the following pro-cedure: Steadily step on the brake pedal with both feet and firmlydepress it....

5 W hen tr ou ble ar ises 421 5-2. Steps to take in an emergency CAUTION ■ If the engine has to be turned off while driving ● Power assist for the brakes and steering wheel will be lost, making thebrake pedal harder to depress and the steering wheel heavier to turn.Decelerate as much as possible bef...

426 6-1. Specifications ■ Engine number The engine number is stamped on the engine block as shown. 1.8 L 4-cylinder (2ZR-FE) engine 2.4 L 4-cylinder (2AZ-FE) engine

427 6-1. Specifications 6 Vehicl e sp ecification s Engine 1.8 L 4-cylinder (2ZR-FE) engine *: Drive belt tension measured with Borroughs drive belt tension gauge No.BT-33-73F (used belt), lb. Model 2ZR-FE engine Type 4 cylinder in line, 4 cycle, gasoline Bore and stroke 3.17 × 3.48 in. (80.5 × 88.3...

428 6-1. Specifications 2.4 L 4-cylinder (2AZ-FE) engine Fuel Model 2AZ-FE engine Type 4 cylinder in line, 4 cycle, gasoline Bore and stroke 3.48 × 3.78 in. (88.5 × 96.0 mm) Displacement 144.1 cu.in. (2362 cm 3 ) Drive belt tension Automatic adjustment Valve clearance (engine cold) Intake Exhaust 0....

429 6-1. Specifications 6 Vehicl e sp ecification s Lubrication system ■ Engine oil selection “Toyota Genuine Motor Oil” is used in your Toyota vehicle. UseToyota approved “Toyota Genuine Motor Oil” or equivalent to satisfythe following grade and viscosity. Oil grade: ILSAC multigrade engine oil Rec...

430 6-1. Specifications How to read oil container label: The ILSAC (International Lubricant Standardization and ApprovalCommittee) Certification Mark is added to some oil containers to helpyou select the oil you should use.

431 6-1. Specifications 6 Vehicl e sp ecification s Cooling system Ignition system Capacity (reference) 1.8 L 4-cylinder (2ZR-FE) engine 5.8 qt. (5.5 L, 4.8 Imp. qt.) 2.4 L 4-cylinder (2AZ-FE) engine 6.0 qt. (5.7 L, 5.0 Imp. qt.) Coolant type Use either of the following. • “Toyota Super Long Life Co...

433 6-1. Specifications 6 Vehicl e sp ecification s Clutch Brakes * 1 : Minimum pedal clearance when depressed with a force of 66 lbf (294 N, 30 kgf) while the engine is running * 2 : Parking brake lever travel when pulled up with a force of 44 lbf (200 N, 20 kgf) NOTICE ■ Automatic transmission flu...

434 6-1. Specifications Steering Tires and wheels Type A Type B Free play Less than 1.2 in. (30 mm) Tire size P195/65R15 89S, T135/70R16 100M Tire inflation pressure(Recommended cold tire inflation pressure) Front: 30 psi (210 kPa, 2.1 kgf/cm 2 or bar) Rear: 30 psi (210 kPa, 2.1 kgf/cm 2 or bar) Spa...

437 6-1. Specifications 6 Vehicl e sp ecification s Fuel information ■ Fuel tank opening for unleaded gasoline To help prevent incorrect fueling, your Toyota has a fuel tank opening thatonly accommodates the special nozzle on unleaded fuel pumps. ■ If your engine knocks ● Consult your Toyota dealer....

439 6-1. Specifications 6 Vehicl e sp ecification s NOTICE ■ Notice on fuel quality ● Do not use improper fuels. If improper fuels are used the engine will bedamaged. ● Do not use leaded gasoline.Leaded gasoline can cause damage to your vehicle’s catalytic converterscausing the emission control syst...

440 6-1. Specifications Tire information Typical tire symbols Full-size tire Compact spare tire Tire size ( → P. 443) DOT and Tire Identification Number (TIN) ( → P. 442) Uniform tire quality grading For details, see “Uniform Tire Quality Grading” that follows. Location of treadwear indicators ( → P...

441 6-1. Specifications 6 Vehicl e sp ecification s Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are thestrands which form the plies in a tire. Radial tires or bias-ply tires A radial tire has “RADIAL” on the sidewall. A tire not marked“RADIAL” is a bias...

442 6-1. Specifications Typical DOT and Tire Identification Number (TIN) DOT symbol * Tire Identification Number(TIN)Tire manufacturer's identifica-tion markTire size codeManufacturer's optional tiretype code (3 or 4 letters)Manufacturing weekManufacturing year * : The DOT symbol certifies that the ...

443 6-1. Specifications 6 Vehicl e sp ecification s Tire size ■ Typical tire size information The illustration indicates typicaltire size. Tire use(P = Passenger car, T = Temporary use)Section width (millimeters)Aspect ratio(tire height to section width)Tire construction code(R = Radial, D = Diagona...

444 6-1. Specifications Tire section names BeadSidewallShoulderTreadBeltInner linerReinforcing rubberCarcassRim linesBead wiresChafer Uniform Tire Quality Grading This information has been prepared in accordance with regulationsissued by the National Highway Traffic Safety Administration of theU.S.A...

445 6-1. Specifications 6 Vehicl e sp ecification s ■ Treadwear The treadwear grade is a comparative rating based on the wearrate of the tire when tested under controlled conditions on a speci-fied government test course. For example, a tire graded 150 would wear one and a half (1-1/2)times as well ...

446 6-1. Specifications Warning: The temperature grades for this tire are established for atire that is properly inflated and not overloaded.Excessive speed, underinflation, or excessive loading, either sepa-rately or in combination, can cause heat buildup and possible tire fail-ure. Glossary of tir...

451 6-1. Specifications 6 Vehicl e sp ecification s * : Table 1 ⎯ Occupant loading and distribution for vehicle normal load for various designated seating capacities Tire related term Meaning Tread That portion of a tire that comes into contact with the road Tread rib A tread section running circumf...

452 6-2. Customization Customizable features Item Function Default setting Customized setting Smart key system (if equipped) ( → P. 23) Smart key system On Off Operation signal (Emergency flashers) On Off Operation signal(Buzzer) On Off Your vehicle includes a variety of electronic features that can...

456 6-3. Initialization Items to initialize Item When to initialize Reference Engine oil mainte-nance data (U.S.A. only) After changing engine oil P. 318 Tire pressure warning system (if equipped) When changing the tire size. P. 330 The following items must be initialized for normal system operation...

459 7 For owners Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructionsextracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions inEnglish. Utilisation correcte des ceintures...

461 7 For owners Entretien et soin ■ Ceintures de sécurité Nettoyez avec un chiffon ou une éponge humectée d'eausavonneuse tiède. Profitez de l'occasion pour vérifierrégulièrement que les ceintures ne sont pas effilochées, entaillées,ou ne paraissent pas exagérément usées. ATTENTION ■ Détérioration ...

476 GAS STATION INFORMATION Auxiliary catch lever P. 309 Trunk opener P. 44 Fuel filler door P. 73 Hood lock release lever P. 309 Fuel filler door opener P. 73 Tire inflation pressure P. 434 Fuel tank capacity (Reference) 13.2 gal. (50 L, 10.9 Imp. gal.) Fuel type Unleaded gasoline only P. 74, 428 C...