Toshiba ZP38 Series- Manuals

SETTING UP 5 Connecting external equipment Before connecting any external equipment, turn off all main power switches. IN OUT IN OUT the back of your TV video recorder decoder* SAT IN/OUT VCR TV SCART 3(EXT 3) SCART 2(EXT 2) SCART 1(EXT1) COMPONENT VIDEO INPUT(EXT 4) A wide variety of external equip...

6 Connecting the speakers In order to enjoy the full benefits of Surround Sound/Dolby Digital it is necessary to connect two rearsurround speakers and two front extension speakers. External Hi-Fi speaker specifications must be 8 ohm, 10W minimum. T V Front Extension (Main) Speaker Front Extension (M...

7 Front connections and controls If the power-on light is unlit press the POWER button onthe front of the TV to switch the set on, then press anumber button on the remote control to see the screen. To put the set into Standby press i on the remote control. To view the TV press i again or any of the ...

8 Selecting the language, Auto tune Before running Auto tune put your decoder and video recorder to Standby . To set up the TV use the buttons on the remote control as detailed on page 4. Set up Language ENGLISH Colour AUTO Auto tuning Manual tuningProgramme sortingTeletextset up 1 2 3 5 6 7 4 Press...

OK : To store EXIT : To exit MENU : To return Searching 0 I RRR 32 0 Manual tuning OK : To store EXIT : To exit MENU : To return System 0 I 60 0 VCR Manual tuning Press OK to select. The System will already have been selected. System I is used in the UK. Press R to select Search . Pressing P will be...

Each signal will show on the television, if it is notyour VCR, press P again to restart the search. When your VCR signal is found, press R to move along to Station . With P , Q , S and R put in the required characters, e.g. VCR . 10 Manual tune continued Programme skip This TV has direct channel ent...

To select a programme position use the numberedbuttons on the remote control. For programme positions below 10 use 0 and the required number e.g. 01 for programme position 1. Programme positions can also be selected using P f ( P ) and P e ( Q ). To revert to the previous programme position press ^ ...

12 Widescreen viewing SUPER LIVE This setting will enlarge the image to fit the screen by stretching the image horizontally, holding the correct proportions at the centre of the image. SUBTITLE Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats.Pres...

Select Colour Temp. from the Picture menu by pressing Q until the lower section of the screen appears. Press S or R to select between NORMAL , WARM and COOL to suit your preference. 1 2 Scan mode has four options. NATURAL , ACTIVE and 100Hz settings run at 100Hz and reduce background flicker. The NA...

Feature menu AV connectionPicture size/positionSurround set upPanel lock OFF Automatic format ON Blue screen ON Geomagnetic Automatic format (Widescreen) Still picture 14 Picture controls continued When this TV receives a true Widescreen picture and Automatic Format is ON , it will automatically be ...

If stereo or dual language broadcasts are transmitted theword Stereo or Dual will appear on the screen each time programme positions are changed, disappearing after a few seconds. If the broadcast is not in stereo the word Mono will appear. 15 Press Q to select On or Off timer . Use the number butto...

AV connection BackDigital input-1 EXT 4 Digital input-2 EXT 2 EXT3 input AV EXT3 output EXT 1 AV connection BackDigital input-1 EXT 4 Digital input-2 EXT 2 EXT3 input AV EXT3 output EXT 1 Input selection and AV connections 16 Defining the INPUT and OUTPUT sockets so that the television recognises co...

17 Dolby Digital Delay time 1 2 3 4 5 Dolby Digital is available from DVD players, some games console players, etc. These must be connectedusing a Scart or phono lead for the picture and an optical or a coaxial cable for the sound. Dolby Digital 1/0 = Centre speaker only.2/0 = Front Left and Front R...

18 Dolby Pro Logic, Digital Surround Processor Dolby Pro Logic is available on many TV broadcasts aswell as video tapes and some DVDs. It uses acombination of 4 speaker channels – front-left, centre,front-right and two rear. If external front speakers are notconnected, the left and right front chann...

19 Teletext – setting up, general information, Auto and List modes This TV has a multi-page teletext memory, which takes a few moments to load. It offers two Modes of viewing text – AUTO will display FASTEXT , if available. LIST will store your four favourite pages. If FASTEXT is available four colo...

AUTO Press T to access index pages. The one displayed is dependant on the broadcaster. LIST Press T to return to the page currently stored on the RED button. Remember to cancel telete xt before changing channels – press the 6 / 7 button twice. ☛ 20 Teletext continued – control buttons Below is a gui...

Select the Manual tuning menu. Highlight the station and press OK , then press R to select Manual fine tuning . Using P or Q adjust to get the best picture and sound. Press OK and then EXIT . OK : To store EXIT : To exit MENU : To return Manual tuning Manual fine tuning 1 I 22 + 2 BBC1 1 2 21 Below ...

23 Important Information Please take note Care and disposal WARNING! NEVER LEAVE A STATIONARY IMAGE ON THE SCREEN EXCLUSION CLAUSE Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:i) fire; ii) earthquake;iii) accidental damage;iv) intentional misuse of t...

Specifications and accessories Broadcast systems/channels PAL-I UHF UK21-UK69 PAL-B/G UHF E21-E69 VHF E2-E12, S1-S41 SECAM-L UHF F21-F69 VHF F1-F10, B-Q SECAM-D/K UHF R21-R69 VHF R1-R12 Video Input PAL, SECAM, NTSC 3.58/4.43 External connections EXT1 Input 21-pin Scart RGB, A/V EXT2 Input 21-pin Sca...