Toshiba WLT68- Manuals

5 The remote control UP Simple at-a-glance reference of your remote control. Remove the back cover to reveal the battery compartment and make sure the batteries are insertedthe right way round. Suitable battery types for this remote are AAA, IEC R03 1.5V.Do not combine a used, old battery with a new...

6 Connecting external equipment Before connecting any external equipment, turn off all main power switches. If there is no switchremove the mains plug from the wall socket. PLEASE NOTE: Although this television is able to connect to HDMI equipment it is possible that some equipment may not operate c...

7 Connecting a computer the back of your television Computer Audio cable for PC to television connection (not supplied) Conversion adaptor if required (not supplied) RGB PC cable (not supplied) Mini D-sub 15 pin connector Before connecting any external equipment, turn off all main power switches. If...

8 Controls and input connections If the RED LED is unlit check that the mains plug isconnected to the power supply. If the picture does notappear press i on the remote control, it may take a few moments. To put the television into Standby press i on the remote control, the GREEN active standby LED w...

9 Tuning Digital television for the first time Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected. To set up the television use the buttons on the remote control as detailedon page 5. EXIT Cancel AUTO TUNING Prog...

HDMI1 B 3C B 2 B 1 DTVATVPCHDMI3HDMI2 Use Q or P to move through the list to select a programme then press OK to view. At any time by pressing and holding B a list will appear on screen showing modes and allstored external equipment . Use P and Q to highlight and OK to select. 3 10 NOTE: As new serv...

NOTE: When the television is switched off the mode being viewed at the time will automatically be selected when the television is switched back on. 11 Digital programme sorting, manual tuning With the list of stations now showing use Q or P to highlight the station you want to move and press R . The...

12 Tuning Analogue mode for the first time The Quick Setup feature will tune all analogue channels currently available in the area. To put the television into ATV mode press and hold B then use P or Q to highlight ATV . Press OK to select. Manual tuning Prog. Channel Station 1 C22 BBC1 2 C28 BBC2 3 ...

Manual tuning Prog. Channel Station 0 C60 1 C22 BBC1 2 C28 BBC2 3 C25 ITV 4 C32 CH4 5 C69 OK Select Sort MENU Back EXIT Watch TV 4 Press R to select System and use P or Q to change if required. Then press R to select Search . Press P or Q to begin the search. The search symbol will flash. 13 Analogu...

Using Auto tuning 1 2 3 4 5 To set up the television using Auto tuning , press MENU and use S or R to select the SET UP menu. You must allow the television to complete the search. When the search is complete the television willautomatically select programme position 1. This may notbe a clear picture...

Manual tuning Prog. Channel Station 0 C60 VCR 1 C22 BBC1 2 C28 BBC2 3 C25 ITV 4 C32 CH4 5 C69 OK Select Sort MENU Back EXIT Watch TV 15 Analogue programme skip, sorting programme positions Press MENU and repeat from Step 2 or press EXIT . Each programme position has to be individually selected. To t...

Press Q to highlight Bass , Treble or Balance and S or R to change the setting. Bass, Treble and Balance 4 In digital mode, press MENU and using Q highlight TV setup then press OK . Use S or R to select SOUND . In analogue mode, press MENU and S or R to select SOUND . 1 2 3 The sound controls are ac...

SUBTITLE When subtitles are included on a letterbox format broadcast, this setting will raise the picture to ensure that all the text is displayed. SUBTITLE 18 Widescreen viewing SUPER LIVE 1 This setting will enlarge a 4:3 image to fit the screen by stretching the image horizontally and vertically,...

19 Widescreen viewing continued 14:9 Use this setting when watching a 14:9 broadcast. Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9, 20:9 etc.) black bars may be visible on the top and b...

PICTURE Picture settings OK Colour management Off Base colour adjustment Active Backlight Control On Cinema mode On Active Vision M100 On MENU Back EXIT Watch TV 2/2 20 Picture controls To return to the original factory settings select Reset in the Picture position menu and press OK . Picture positi...

21 Picture controls continued DNR enables you to ‘soften’ the screen representation of a weak signal to reduce the noise effect. DNR – Digital Noise Reduction Select DNR from the Picture settings menu. 1 Use S or R to adjust. The differences may not always be noticeable (for the best result use lowe...

PICTURE Picture settings OK Colour management On Base colour adjustment OK Active Backlight Control On Cinema mode On Active Vision M100 On MENU Back EXIT Watch TV Base colour adjustment Hue Saturation Red +2 +6 Green 0 0 Blue 0 0 Yellow 0 0 Magenta 0 0 Cyan 0 0 Reset OK MENU Back EXIT Watch TV 22 P...

23 Picture controls continued 1/2 SET UP Language English Country UK Auto tuning OK Manual tuning OK Antenna Amplifier On AV connection OK MENU Back EXIT Watch TV In the PICTURE menu press Q to select Cinema mode . 1 Press S or R to select On or Off . NOTE: When a DVD with subtitles is being played ...

From the FUNCTION menu select Panel lock and choose On or Off using S or R . Panel lock disables the buttons on the television. All buttons on the remote control can still be used. Panel lock 1 When Panel lock is On , a reminder will appear when the buttons on the television are pressed. If the stan...

25 The timers Press Q to select the Sleep timer . Use the number buttons to set the required time. Forexample, to switch the television off in one and ahalf hours enter 01:30, or press S or R to increase/decrease in steps of 10 minutes. Press EXIT to finish. This feature will set the television to g...

15.39 Wed, 23 Aug. Page Up Page Down Timers Jakers! ALL PROGS BBC ONE BBC TWOITV1Channel 4FiveITV2BBC THREEBBC FOURITV3SKY THREEUKTV HistoryMore 4 Watch More info EXIT Watch TV TV/FAV Change progs i + Wednesday z 15:00 15:30 16:00 16:30 x Diagnosis B Jakers! Krypt 50/50 Raven Escap Sudo-Q Ready Stea...

27 Digital settings – parental control In order to prevent viewing of unsuitable films and programmes, channels and menus can be locked. Thesecan then only be accessed with a security code PIN when in digital mode. PARENTAL CONTROL Mode ON Change Pin OK MENU Back EXIT Watch TV PARENTAL CONTROL Mode ...

28 Digital settings – favourite programmes, locked programmes, encrypted programmes Locked Programmes stops the viewing of digital channels, they can only be accessed by entering the PIN. Locking programmes 1 From the FEATURE MENU press Q to select Favourite and Locked Programmes . Press R repeatedl...

29 Digital settings continued – audio languages, audio output, subtitles, reset tv, common interface This feature allows a programme or film to be viewed with a choice of soundtrack language, provided they are currently being broadcast. Audio languages 1 In the SETUP MENU press Q to select Languages...

30 Digital settings continued – software upgrade SOFTWARE UPGRADE Version 2.7 Auto upgrade ON Search for New Software OK 0 Continue MENU Back EXIT Watch TV This feature can be used to check the version of software currently installed. Version If Auto upgrade is selected the software will automatical...

31 PC settings – picture position, clock phase, sampling clock, reset, PC media windows 3 3 Use S or R to adjust until the picture clears. In the SET UP menu press Q until PC Setting is highlighted. Press OK to select, then Q to highlight Clock phase . Use S or R to adjust until the picture clears. ...

1/2 SET UP Language English Country UK Auto tuning OK Manual tuning OK Antenna Amplifier On AV connection OK MENU Back EXIT Watch TV Input selection and AV connections 32 Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 6for a clear view of the ba...

34 Analogue text services – setting up, general information, Auto and LIST modes This television has a multi-page text memory, which takes a few moments to load. It offers two Modes of viewing text – Auto will display Fastext , if available. LIST will store your four favourite pages. If Fastext is a...

Press T to access the index/initial page. The one displayed is dependant on the broadcaster. Remember to cancel te xt before changing channels – press the 6 / / 7 button twice. 35 Analogue text services – control buttons, Digital interactive services Below is a guide to the functions of the remote c...

Below are the answers to some of the most common queries.For more information go to www.toshiba.co.uk A Check the mains switch is on and check all mainsconnections. Check the television is not in standby mode. Why is there no sound or picture? Q A Check the volume has not been turned down orthat sou...

38 Q uestions and A nswers continued Cleaning the screen and cabinet… Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage. Disposal… The following information ...

Specifications and accessories Broadcast systems/channels PAL-I UHF UK21-UK69 PAL-B/G UHF E21-E69VHF E2-E12, S1-S41 SECAM-L UHF F21-F69VHF F1-F10, B-Q SECAM-D/K UHF R21-R69 VHF R1-R12 Video Input PAL, SECAM, NTSC 3.58/4.43 External connections EXT1 Input/Output 21-pin SCART RGB, A/VSelectable output...