Page 5 - TABLE OF CONTENTS; Page
EO1-11095 MA-1450-1 SERIES TABLE OF CONTENTS Page 1. TO OUR CUSTOMERS .............................................................................................................. 1-1 2. UNPACKING .........................................................................................................
Page 9 - TO OUR CUSTOMERS; Be sure to keep this manual for future reference.
1. TO OUR CUSTOMERS EO1-11095 1-1 1. TO OUR CUSTOMERS 1. TO OUR CUSTOMERS Thank you for choosing the TEC electronic cash register MA-1450 series. This instruction manual provides adescription of the functions and handling of this register and should be read carefully to ensure optimumperformance. Si...
Page 10 - UNPACKING
2. UNPACKING EO1-11095 2-1 2. UNPACKING 2. UNPACKING (1) (4) (5) (6) (8) (2) (3) (7) (1) Paper Roll 45 mm x Ø50 mm (2 pcs.)(2) Mode Key (REG Key, MGR Key, MA Key, S Key; 2 pcs.respectively) (3) Receipt Cover Key (2 pcs.) (4) Stamp Ink (1 pc.)(5) Ribbon Cassette (1 pc.)(6) Journal Reel (1 pc.)(7) Dra...
Page 11 - APPEARANCE AND NOMENCLATURE
3. APPEARANCE AND NOMENCLATURE EO1-11095 3-1 3. APPEARANCE AND NOMENCLATURE 3. APPEARANCE AND NOMENCLATURE • Power Switch ............ The power switch is provided at the right-hand side of the cabinet. The AC power is turned on when the switch is pushed to ON, and turned off when the switch is push...
Page 12 - MODE LOCK AND MODE SELECTOR KEYS; MODE LOCK
4. MODE LOCK AND MODE SELECTOR KEYS EO1-11095 4-1 4. MODE LOCK AND MODE SELECTOR KEYS 4.1 MODE LOCK (POSITION) (FUNCTION) SET ........... In this position, the register will allow programming operations. ............... (LOCK position) The register operations are locked when the Mode Lock is in this...
Page 13 - DISPLAY; DPT; CUSTOMER DISPLAY (Rear or Remote Display); AMOUNT
5. DISPLAY EO1-11095 5-1 5. DISPLAY 5. DISPLAY The operator display is located at the top of the register just above the keyboard. OPERATOR DISPLAY (Front Display) DPT RPT AMOUNT TL ST CG R OFF ALM SIGN ON MENU PRICE CLERK IN-LINE SLIP The customer display can be fixed as a rear display or moved to ...
Page 16 - INSTALLING THE RECEIPT/JOURNAL ROLL; Installing the Receipt Roll
6. OUTLINE OF PREPARATION PROCEDURE BEFORE OPERATING THE ECR EO1-11095 6-2 6.1 INSTALLING THE RECEIPT/JOURNAL ROLL 6 Install the Receipt and Journal rolls (referring to the following section “Installing the Receipt/Journal Roll”). 6.1 INSTALLING THE RECEIPT/JOURNAL ROLL WARNING! Care must be taken n...
Page 17 - A: Manual installation
6. OUTLINE OF PREPARATION PROCEDURE BEFORE OPERATING THE ECR EO1-11095 6-3 4 Hold the paper roll so that the paper end will be fed from thebottom. 6.1 INSTALLING THE RECEIPT/JOURNAL ROLL 5 Place the paper roll in the outer side holder of the two roll holders. 6 There are the following two ways of a ...
Page 18 - Installing the Journal Roll
6. OUTLINE OF PREPARATION PROCEDURE BEFORE OPERATING THE ECR EO1-11095 6-4 Installing the Journal Roll 1 6.1 INSTALLING THE RECEIPT/JOURNAL ROLL Follow Steps 1 to 5 for “Installing the Receipt Roll” on thepreceding pages, except that the paper roll should be placed innerside holder of the two holder...
Page 19 - Detach the Ribbon Cover.; Attach the Ribbon Cover.
6. OUTLINE OF PREPARATION PROCEDURE BEFORE OPERATING THE ECR EO1-11095 6-5 Detach the Ribbon Cover. 1 2 3 6.2 SETTING THE RIBBON CASSETTE 6.2 SETTING THE RIBBON CASSETTE Set the Ribbon Cassette.After setting the Ribbon Cassette, turn the knob of the RibbonCassette in the arrow direction several time...
Page 20 - CASHIER KEY OR CASHIER SIGNING OPERATIONS; CASHIER SIGNING OR CASHIER KEY OPERATIONS; CODE ENTRY METHOD; sales entries are now possible.
7. CASHIER KEY OR CASHIER SIGNING OPERATIONS EO1-11095 7-1 7.1 CODE ENTRY METHOD 7. CASHIER SIGNING OR CASHIER KEY OPERATIONS The MA-1450 adopts one of the following cashier-identifying operations. • CODE ENTRY METHOD, using the [LOG/RECEIPT] (or [LOG]) key. • CASHIER KEY METHOD (hardware option), u...
Page 21 - -digit cashier’s own secret code; (3) Mode Changes With Signing Operations
7. CASHIER KEY OR CASHIER SIGNING OPERATIONS EO1-11095 7-2 7.1 CODE ENTRY METHOD (2) For Multi-drawer Machines Sign-ON [@/FOR] [LOG/RECEIPT] 2-digit manager-assign code 2-digit cashier’s own secret code 1 or 2 as Drawer No. By entering a Drawer No., the designated drawer will open on finalizing each...
Page 22 - Push-stay Cashier Locks and Keys; Cashier Locks 1 to 4
7. CASHIER KEY OR CASHIER SIGNING OPERATIONS EO1-11095 7-3 7.2 CASHIER KEY METHOD (Hardware Option) 4 Light to indicateON-status 1 2 3 7.2 CASHIER KEY METHOD (Hardware Option) When the [LOG/RECEIPT] (or [LOG]) key is not installed, the Push-stay Cashier Keys may be provided at theside of the Mode Lo...
Page 23 - TRAINING MODE START AND END; CONDITION; OPERATION FOR TRAINING MODES START; Code Entry Method
7. CASHIER KEY OR CASHIER SIGNING OPERATIONS EO1-11095 7-4 7.3 CASHIER KEY METHOD ([CLK] Keys) When the [LOG/RECEIPT] (or [LOG]) key is not installed, [CLK] keys ([CLK 1] to [CLK 8]; max. 8 keys may beprovided on the ECR keyboard.) Sale entries will be possible only when one of the [CLK] keys is dep...
Page 24 - Cashier Key Method; ENTRIES IN TRAINING MODE; Registering operations are allowed by the trainees:; OPERATION FOR TRAINING MODE END; Code Entry Method, and Cashier Key Method Case 2
7. CASHIER KEY OR CASHIER SIGNING OPERATIONS EO1-11095 7-5 7.4 TRAINING MODE START AND END ■ Cashier Key Method Case 1: Set the Cashier Key programmed with Training statusCase 2: 99 → [LOG/RECEIPT] (or [LOG]) .................................... A training-ON receipt is issued. Fixed to 99 for t...
Page 25 - KEYBOARD LAYOUT; Department Keys; Other keys not placed in the keyboard above:
8. KEYBOARD LAYOUT EO1-11095 8-1 8. KEYBOARD LAYOUT The following are typical keyboard layouts for the MA-1450 series. Since this series is designed to be capable ofprogramming most of the keys to be placed in the desired place on the keyboard, these are merely examples.The keyboard of your register...
Page 27 - to; PLU
9. FUNCTIONS OF EACH KEY EO1-11095 9-1 LOG key. Used in case of Cashier Code Entry Method, todeclare start or end of normal operation by cashier. For details, 7-1 refer to Section 7.1. Receipt key. Used to change the receipt-ON/OFF mode. 10-3 Log/Receipt key. This is a dual-function key that has bot...
Page 31 - REGISTERING PROCEDURE AND PRINT FORMAT; TRAINING MODE is available:; Mode Lock: Insert the “REG” key and set it to the “REG” position.; Now you are ready for sale entries.
10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11095 10-1 10. REGISTERING PROCEDURE AND PRINT FORMAT 10. REGISTERING PROCEDURE AND PRINT FORMAT Before starting sale entries, read through the following instructions: TRAINING MODE is available: If you are a beginner in operating this register, ask the...
Page 32 - OPERATION
10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11095 10-2 OPERATION PAGE TAX STATUS or FOOD STAMP STATUSMODIFICATION ................................................... 10-19 MANUAL TAX ENTRY ......................................... 10-19 SUBTOTAL READ .................................................
Page 33 - Mode Lock may be in any position; Extinguished; Receipt ON Status
10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11095 10-3 ....... ....... 10.1 RECEIPT-ISSUE/NON-ISSUE SELECTION 10.1 RECEIPT-ISSUE/NON-ISSUE SELECTION Receipts are issued or not issued according to the “R OFF” lamp illuminated/extinguished status on the OperatorDisplay panel. “R OFF” (Receipt OFF) ...
Page 34 - LOAN; DEPARTMENT ENTRY
10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11095 10-4 10.3 LOAN Repeatable to add up amounts. . . . To read the loantotal so far entered. * * * * * LOAN * * * * * CASH $20,00CASH $10,00CASH $35,00SUBTL $65,00TOTAL $ 65 , 00 JONES 0095 16:05TM Loan Receipt Header Amounts loaned Total amount loane...
Page 35 - GASOLINE ENTRY; PLU ENTRY
10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11095 10-5 10.5 GASOLINE ENTRY 10.5 GASOLINE ENTRY Enter the sale amount of gasoline. The quantity of gasoline is calculated by the preset gallon unit price. OPERATION Same as Open Department Type of DEPARTMENT ENTRY sequence using the Department Key wh...
Page 36 - REPEAT ENTRY
10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11095 10-6 10.7 REPEAT ENTRY Hard Rolls-4 $0,70TFHard Rolls-4 $0,70TF 10.7 REPEAT ENTRY To repeat the same item of the last entry, simply depress the last key of the department or PLU entry sequenceor depress the [RPT] key. OPERATION (1) Department Repe...
Page 37 - PLU Multiplication; SPLIT PACKAGE PRICING
10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11095 10-7 10.9 SPLIT PACKAGE PRICING (“Q’ty” = Quantity ... in the patterns listed below) (2) PLU Multiplication -- Receipt Print Format -- Open PLU Type• |Open-PLU Code| [PLU] |Quantity| [@/FOR] |Price| [AMT] • |Quantity| [@/FOR] |Price| [PLU Preset-C...
Page 38 - NOTE 1 below; item but not the whole package quantity.)
10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11095 10-8 (2) PLUOpen PLU• |Purchased Q’ty| [@/FOR] |Split-Price Type PLU Code| [PLU] |Whole Package Price| [AMT] |Whole Package Price| [PLU Preset-code Key] Preset PLU• |Purchased Q’ty| [@/FOR] |Split-Price Type PLU Code| [PLU] [PLU Preset-code Key] P...
Page 40 - Operation Examples of HI-CONE PLUs
10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11095 10-10 10.10 HI-CONE PLUs Preset PLU• |Whole Package Q’ty| [@/FOR] |Split-Price Type PLU Code| [PLU] [PLU Preset-code Key] HI-CONE PLUs Open PLU |Split-Price Type PLU Code| [PLU] |Whole Package Price| [AMT] |Whole Package Price| [PLU Preset-code Ke...
Page 43 - OTHER INCOME DEPARTMENT ENTRY, OTHER INCOME PLU ENTRY
10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11095 10-13 10.14 OTHER INCOME DEPARTMENT ENTRY, OTHER INCOME PLU ENTRY This operation is used to enter items which do not directly become sales for the store, such as lottery, postage,gift wrapping fee, size adjustment fee, utility (payment of electric...
Page 48 - LISTING CAPACITY OPEN
10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11095 10-18 10.26 NON-ADD NUMBER PRINT TEC STORE 1343 PEACH DRIVE PHONE : 87-6437 Open 8:00am to 7:00pmClosed: every Wednesday 12-19-1994 MON #3001 VEGETABLE $3,00TFFRUIT $1,30TFSUBTL $4,30 * * * * * ALL VD * * * * * JONES 0153 17:22TM NOTES: 1. All Voi...
Page 49 - TAX STATUS or FOOD STAMP STATUS MODIFICATION; (where irregular tax amount addition is applied)
10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11095 10-19 10.28 SELECTIVE ITEMIZER (SI) STATUS MODIFICATION - - - - - - TAX5 $0.50 - - - - - - 10.31 SUBTOTAL (Sale Total Pre-taxed) READ OPERATION -- Receipt Print Format -- [ST] SUBTL $6.00 The sale total (pre-taxed) of the items so far entered isdi...
Page 50 - TAXABLE TOTAL READ and SUBTOTAL PRINT; TAX CALCULATION AND PRINT
10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11095 10-20 10.33 TAXABLE TOTAL READ and SUBTOTAL PRINT - - - - - - 10.33 TAXABLE TOTAL READ and SUBTOTAL PRINT (when only one of [ST] and [TXBL TL] keys, not both, is installed on the keyboard) In this case, the key is usually programmed as [ST] key wi...
Page 51 - FOOD STAMPABLE TOTAL READ, FOOD STAMP TENDERING
10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11095 10-21 10.36 TAX EXEMPTION TAX1EX $1.50TAX2EX $6.00 10.36 TAX EXEMPTION OPERATION Selective Tax Exemption Examples) [TX1/M] [EX] Sale Finalization ... to exempt from Tax 1 only [GST/M] [EX] Sale Finalization ... to exempt from GST only [TX1/M] [TX2...
Page 52 - SALE FINALIZATION BY MEDIA KEYS
10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11095 10-22 10.39 MULTI-TENDERING Short-tendering repeated multiple times by the same media (allowed only when the media key is programmed toallow short-tendering). OPERATION ([TXBL TL]) (|Quantity| [@/FOR]) |1st Amount Tendered| [MEDIA] (|Quantity| [@/...
Page 54 - SALE PAID IN FOREIGN CURRENCIES
10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11095 10-24 10.42 SALE PAID IN FOREIGN CURRENCIES OPERATION [TXBL TL] [CUR1] Amount Tendered in [CUR1] [AT/TL] Foreign Currency | 10.41 CHECK CASHING (No-sale cashing of a non-cash media) TEC STORE 1343 PEACH DRIVE PHONE : 87-6437 Open 8:00am to 7:00pmC...
Page 55 - NO-SALE EXCHANGE from Foreign Currency to Domestic Currency; NO-SALE EXCHANGE from Domestic Currency to Foreign Currency
10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11095 10-25 10.43 NO-SALE EXCHANGE from Foreign Currency to Domestic Currency TAX $0.48TOTAL $ 8 . 48 CUR1 50.00 5,3729 * CATEND $9.31CHANGE $0.83 Amount of CUR2 to be exchanged Exchange Rate (optional print) Domestic Currency amount equivalent to the C...
Page 58 - CHARGE POSTING: Previous Balance Manual Entry Type
10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11095 10-28 This line is printed only when a post-issue receipt is issued after theOrdinary Receipt is issued, or thesecond and subsequent post-issuereceipts are issued. 10.49 RECEIPT POST-ISSUE 12-19-1994 MON #3001 * * * * * COPY * * * * * TOTAL $ 3 , ...
Page 60 - Receipt 1
10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11095 10-30 10.51 CHARGE POSTING: Customer File Type (Check Track Memory Option) New Balance istransferred as PB. TEC STORE 1343 PEACH DRIVE PHONE : 87-6437 Open 8:00am to 7:00pmClosed: every Wednesday 12-19-1994 MON #3001 PB+ $0,00 VEGETABLE $3,50TFMEA...
Page 64 - Printed on Remote Slip Printer:
10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11095 10-34 10.55 REMOTE SLIP PRINTER (hardware option) OPERATION 12-19-1994 MON #3001 VEGETABLE -1,20TFFRUIT $6,50TFMEAT $6,00TFTAX $0,68TOTAL $ 11 , 98 CHECK $15,00CHANGE $3,02 ITEM 1JONES 0222 14:35TM CHECK No324628 TEC STORE 1343 PEACH DRIVE, TORRAN...
Page 67 - JOURNAL AND RECEIPT PAPER-END DETECTOR; prompt the operator to replace the old paper roll with a new one.
11. JOURNAL AND RECEIPT PAPER-END DETECTOR EO1-11095 11-1 11. JOURNAL AND RECEIPT PAPER-END DETECTOR 11. JOURNAL AND RECEIPT PAPER-END DETECTOR (1) This detects when either the journal or receipt paper is coming near the end. It is provided in order to prompt the operator to replace the old paper ro...
Page 68 - ECR PRINTER MOTOR LOCK DETECTOR; then turn the power to ON again.
12. ECR PRINTER MOTOR LOCK DETECTOR EO1-11095 12-1 12. ECR PRINTER MOTOR LOCK DETECTOR 12. ECR PRINTER MOTOR LOCK DETECTOR (1) This detects the printer motor lock condition caused by some trouble. (2) When such a condition is detected, the front display indicates “Error” and none of the keys (includ...
Page 69 - REMOTE SLIP PRINTER MOTOR LOCK DETECTOR; cause of the motor lock, and then turn the powers to ON again.
13. REMOTE SLIP PRINTER MOTOR LOCK DETECTOR EO1-11095 13-1 13. REMOTE SLIP PRINTER MOTOR LOCK DETECTOR 13. REMOTE SLIP PRINTER MOTOR LOCK DETECTOR (1) This detects the remote slip printer motor lock condition caused by some trouble. (2) When such a condition is detected, the front display indicates ...
Page 70 - PRINTER GUIDE OPEN DETECTOR; This detects the printer guide open condition.
14. PRINTER GUIDE OPEN DETECTOR EO1-11095 14-1 14. PRINTER GUIDE OPEN DETECTOR 14. PRINTER GUIDE OPEN DETECTOR (1) This detects the printer guide open condition. (2) When such a condition is detected, the front display indicates “Error” and none of the keys (including [RF] and [JF]) will be accepted...
Page 71 - It may cause paper jamming.; PAPER ROLL REPLACEMENT AND OTHER; REPLACING THE RECEIPT ROLL; Care must be taken not to injure yourself with the paper cutter.
15. PAPER ROLL REPLACEMENT AND OTHER MAINTENANCE OPERATIONS EO1-11095 15-1 Depress the [RF] key to feed the remaining paper end. CAUTION: Never try to pull out the remaining paper end by hand. It may cause paper jamming. 15.1 REPLACING THE JOURNAL ROLL 15. PAPER ROLL REPLACEMENT AND OTHER MAINTENANC...
Page 72 - PAPER ROLL REPLACEMENT AND OTHER MAINTENANCE OPERATIONS; REPLACING THE JOURNAL ROLL; CAUTION: Never try to pull out the remaining paper end by hand.
15. PAPER ROLL REPLACEMENT AND OTHER MAINTENANCE OPERATIONS EO1-11095 15-2 To remove the Receipt Cover, insert the Receipt Cover Key to theReceipt Cover Lock, and turn it 90 ° clockwise. 1 2 3 15.2 REPLACING THE JOURNAL ROLL 15.2 REPLACING THE JOURNAL ROLL Depress the [JF] key to wind up enough of t...
Page 73 - REPLACING THE RIBBON CASSETTE; Remove the Ribbon Cover.
15. PAPER ROLL REPLACEMENT AND OTHER MAINTENANCE OPERATIONS EO1-11095 15-3 1 2 3 4 15.3 REPLACING THE RIBBON CASSETTE 15.3 REPLACING THE RIBBON CASSETTE When the print data on the receipt and journal becomes too dim, replace the Ribbon Cassette in the followingorder. Remove the Ribbon Cover. Remove ...
Page 74 - Attach the Receipt Cover.; REPLENISHING INK TO THE STORE NAME STAMP
15. PAPER ROLL REPLACEMENT AND OTHER MAINTENANCE OPERATIONS EO1-11095 15-4 Attach the Receipt Cover. Apply only two or three drops. Stamp may not print darkimmediately. Allow time for ink to saturate the stamp. To remove the Receipt Cover, insert the Receipt Cover Key to theReceipt Cover Lock, and t...
Page 75 - MANUAL DRAWER RELEASING; To return the drawer, follow the reverse procedure for removing.
15. PAPER ROLL REPLACEMENT AND OTHER MAINTENANCE OPERATIONS EO1-11095 15-5 1 Insert the Drawer Release Key into the drawer release lock andturn the key clockwise. The drawer will then open. (Fig.1) The Drawer Release Key can be taken out by returning it to theoriginal position. When the drawer is cl...
Page 76 - Push the Cash Drawer Cover to the back of the drawer.; Unlocking; Unlock the cover using the key, and lift the front end.
15. PAPER ROLL REPLACEMENT AND OTHER MAINTENANCE OPERATIONS EO1-11095 15-6 15.7 CDC (Cash Drawer Cover; Option) LOCK Locking (Fig.4) 1 2 Push the Cash Drawer Cover to the back of the drawer. Press the cover lightly, insert the key into the key hole on thecover, and turn it to lock. Fig. 4 Unlocking ...
Page 81 - DAILY OPERATION FLOW; CASHIER’S OPERATIONS
1. DAILY OPERATION FLOW EO1-11095 1-1 1. DAILY OPERATION FLOW 1. DAILY OPERATION FLOW The following shows the typical flow of daily operations on the ECR. ..... ..... ..... CASHIER’S OPERATIONS MANAGER’S OPERATIONS OR ASSISTANCE (described in OPERATOR’S GUIDE) (described in MANAGER’S GUIDE) Sign-ON ...
Page 82 - ITEMS PROGRAMMED TO REQUIRE MANAGER INTERVENTIONS; ) The manager goes to the cashier counter with the MGR or MA key.; ) The cashier operates the required item.
2. MANAGER INTERVENTION EO1-11095 2-1 2.1 ITEMS PROGRAMMED TO REQUIRE MANAGER INTERVENTIONS 2. MANAGER INTERVENTION 2.1 ITEMS PROGRAMMED TO REQUIRE MANAGER INTERVENTIONS During daily sale entry operations, the cashier may call for Manager Interventions. The following is the operationflow of a Manage...
Page 84 - OTHER OPERATIONS REQUIRING MANAGER INTERVENTIONS
2. MANAGER INTERVENTION EO1-11095 2-3 2.2 OTHER OPERATIONS REQUIRING MANAGER INTERVENTIONS 2.2 OTHER OPERATIONS REQUIRING MANAGER INTERVENTIONS Listing Capacity or Amount Limit ReleaseAmount Limits may be programmed on Departments/PLUs, Tender Medias, [DOLL DISC], [VND CPN], [STRCPN], [BTL RTN]. The...
Page 85 - MANAGER’S OWN OPERATIONS IN “MGR” MODE; PICK UP OPERATION
3. MANAGER’S OWN OPERATIONS IN “MGR” MODE EO1-11095 3-1 3. MANAGER’S OWN OPERATIONS IN “MGR” MODE The following are operations possible only in the “MGR” position of the Mode Lock, which are performed by themanager or by a person under the manager’s control. 3.1 PICK UP OPERATION This operation is u...
Page 87 - OPERATIONS IN “ - ” MODE; ORDINARY OPERATIONS IN “ - ” MODE; OPERATION AND RECEIPT SAMPLE
4. OPERATIONS IN “ - ” MODE EO1-11095 4-1 4.1 ORDINARY OPERATIONS IN “ - ” MODE 4. OPERATIONS IN “ - ” MODE Instead of using the [RTN MDSE] or [VOID] key in the “REG” or “MGR” mode for deleting individual items, the“ - ” mode automatically processes positive items into negative and negative into pos...
Page 90 - Daily Reports
5. READ (X) AND RESET (Z) REPORTS EO1-11095 5-1 5. READ (X) AND RESET (Z) REPORTS 5. READ (X) AND RESET (Z) REPORTS The following table shows the key operation to take each report. The “X” and “Z” reports have exactly the sameprint content if both are available, except that: 1. The “X” reports allow...
Page 93 - COMBINATION REPORTS
5. READ (X) AND RESET (Z) REPORTS EO1-11095 5-4 5.1 COMBINATION REPORTS 5.1 COMBINATION REPORTS Multiple reports can be programmed to be issued in one operation sequence. The following are reportsprogrammable for combinations (max. 5 reports in one table, max. 3 tables). Ask your TOSHIBA TECrepresen...
Page 96 - Reset Report Format Sample
5. READ (X) AND RESET (Z) REPORTS EO1-11095 5-7 5.3 GENERAL NOTES ON REPORT TAKINGS TEC STORE 1343 PEACH DRIVE PHONE : 87-6437 Open 8:00am to 7:00pmClosed: every Wednesday 12-19-1994 MON #3001 Z CLERK 01 JONES GS 125 $346.77 NS 112 $300.48 ITEM/CUS 1.56NS /CUS $4.17NO SALE 2HOLD CTR 1 0001Z02 SMITH ...
Page 97 - DAILY SALESPERSON READ OR RESET; Reset Report Sample
5. READ (X) AND RESET (Z) REPORTS EO1-11095 5-8 5.3 GENERAL NOTES ON REPORT TAKINGS DAILY SALESPERSON READ OR RESET (all Salespersons) Reset Report Sample Mode Lock: X for read Enter 5, depress Z for reset [AT/TL] CREDIT CARD COMPANY SALES READ ORRESET (Daily or GT) Reset Report Sample Mode Lock: X ...
Page 99 - DAILY HOURLY RANGE READ or RESET; DEPARTMENT READ or RESET
5. READ (X) AND RESET (Z) REPORTS EO1-11095 5-10 5.3 GENERAL NOTES ON REPORT TAKINGS DAILY HOURLY RANGE READ or RESET Reset Report Sample Mode Lock: X for read Enter 10, depress Z for reset [AT/TL] TEC STORE 1343 PEACH DRIVE PHONE : 87-6437 Open 8:00am to 7:00pmClosed: every Wednesday 12-19-1994 MON...
Page 100 - Department Data; All Department Read or Reset (Daily or GT)
5. READ (X) AND RESET (Z) REPORTS EO1-11095 5-11 5.3 GENERAL NOTES ON REPORT TAKINGS TEC STORE 1343 PEACH DRIVE PHONE : 87-6437 Open 8:00am to 7:00pmClosed: every Wednesday 12-19-1994 MON #3001 Z DP ALL VEGETABLE 33230,30% $101.20 DP 15 1 $1.00 TOTAL 126 $333.98-TOTAL 1 $1.00 VE&FR 42 47,47% $15...
Page 101 - PLUs of zero sale will be skipped.
5. READ (X) AND RESET (Z) REPORTS EO1-11095 5-12 PLU (PLU SALES DATA) READ or RESET Individual PLU Read (Daily or GT) Mode Lock: X Enter 13 [#] for Daily Report, or Enter 213 [#] for GT Report. Enter the PLU code, depress [PLU]. (Repeat this step if necessary.)Depress [ST] for subtotal.Depress [AT/T...
Page 103 - CUSTOMER FILE READ; Individual Files Read
5. READ (X) AND RESET (Z) REPORTS EO1-11095 5-14 CUSTOMER FILE READ (for Check Track Memory Type only) All Files (with balance remaining) Read Mode Lock: X Enter 15, depress [AT/TL] TEC STORE 1343 PEACH DRIVE PHONE : 87-6437 Open 8:00am to 7:00pmClosed: every Wednesday 12-19-1994 MON #3001 X CUST AL...
Page 104 - Credit-balance Files Read; PLU GROUP SALES READ or RESET (Daily or GT)
5. READ (X) AND RESET (Z) REPORTS EO1-11095 5-15 5.3 GENERAL NOTES ON REPORT TAKINGS TEC STORE 1343 PEACH DRIVE PHONE : 87-6437 Open 8:00am to 7:00pmClosed: every Wednesday 12-19-1994 MON #3001 X CUST CRED JAMES HAILY#000000000001 $4.70 0072 15:41TM Customer’s NameFile CodeBalance Credit-balance Fil...
Page 105 - GT REPORTS; Header Example
5. READ (X) AND RESET (Z) REPORTS EO1-11095 5-16 5.3 GENERAL NOTES ON REPORT TAKINGS GT REPORTS The print form and items of a GT report are the same as those of its corresponding daily report, except the reportheader portion. Please also note that some items provided in the daily report are not prov...
Page 106 - PROGRAMMING OPERATIONS; TABLE OF PROGRAMMING OPERATIONS
6. PROGRAMMING OPERATIONS EO1-11095 6-1 6. PROGRAMMING OPERATIONS 6. PROGRAMMING OPERATIONS This chapter is provided for the store programmer or the store manager who may have to change theprogrammed data of the MA-1450 series ECR on the daily, weekly, or monthly basis. Usually, all the basicprogram...
Page 107 - Basic Key Functions
6. PROGRAMMING OPERATIONS EO1-11095 6-2 6.1 BASIC KEY FUNCTIONS AND KEYBOARD VARIATIONS IN PROGRAMMING OPERATIONS 6.1 BASIC KEY FUNCTIONS AND KEYBOARD VARIATIONS INPROGRAMMING OPERATIONS 6.1.1 Basic Key Functions 1. The following are main keys and their functions to be used in programming operations...
Page 108 - STORE NAME/MESSAGE AND COMMERCIAL MESSAGE PROGRAMMING (Submode 1); CHARACTER ENTRIES; CHARACTER CODE ENTRY Method
6. PROGRAMMING OPERATIONS EO1-11095 6-3 6.2 CHARACTER ENTRIES Case 2: When the ECR Keyboard is Flat Keyboard Type:The Flat keyboard will be set with the “Setting Mode Key Layout” in the programming operations including thecharacter entries. On this keyboard, functions and locations of keys required ...
Page 109 - Character Code Table 1: Standard Characters; Column Code; II
6. PROGRAMMING OPERATIONS EO1-11095 6-4 6.3 CHARACTER CODE ENTRY METHOD Character Code Table 1: Standard Characters 6.3 CHARACTER CODE ENTRY METHOD Column Code Row Code 2 3 4 5 6 7 8 9 10 11 12 13 14 15 00 0 @ P p \ → 01 ! 1 A Q a q II ← 02 " 2 B R b r III ↓ 03 # 3 C S c s II ↑ 04 $ 4 D T d t , ...
Page 110 - All Double-sized Declaration
6. PROGRAMMING OPERATIONS EO1-11095 6-5 • Depress the [X] key twice prior to the first character code entry to set the entire message line or enter namewith all double-sized characters.ex.) To set “GROUP”all in double-sized: [X] [X] 407 [#] 502 [#] 415 [#] 505 [#] 500 [#] G R O U P All Double-sized ...
Page 113 - CONDITION REQUIRED FOR PROGRAMMING OPERATIONS
6. PROGRAMMING OPERATIONS EO1-11095 6-8 6.5 CONDITION REQUIRED FOR PROGRAMMING OPERATIONS 6.5 CONDITION REQUIRED FOR PROGRAMMING OPERATIONS At the top of each programming operation a “CONDITION” is given. Unless the register satisfies this condition,the programming operations will not be allowed. Th...
Page 114 - any system option selection.
6. PROGRAMMING OPERATIONS EO1-11095 6-9 2. Even if the option “Store Name Print by RUBBER STAMP” is selected, data can be programmed for the store name/message. However, the Rubber Stamp, instead of the programmed name/message will actually be printed for operations to issue receipts.If the option “...
Page 115 - OPERATION: Presumed that nothing has been programmed on each line.
6. PROGRAMMING OPERATIONS EO1-11095 6-10 OPERATION: Presumed that nothing has been programmed on each line. Mode Lock; SET; enter 1, depress [@/FOR]. 6.6 STORE NAME/MESSAGE AND COMMERCIAL MESSAGE PROGRAMMING (Submode 1) 11-14-1994 MON #0 P01 1 TEC STORE 2 1343 PEACH DRIVE3 PHONE : 87-64375Open 8:00a...
Page 116 - CASHIER CODE AND NAME PROGRAMMING (Submode 2); Programming
6. PROGRAMMING OPERATIONS EO1-11095 6-11 For Address 2: Cashier Status 2 [ST] |Cashier Status| [#] For Address 1: Cashier Name 1 [ST] Character Entries [ST] 6.7 CASHIER CODE AND NAME PROGRAMMING (Submode 2) Programming CONDITION Any time outside a sale OPERATION Mode Lock: SET 2 [@/FOR] |Cashier Cod...
Page 118 - Deletion; or; ex.) To delete Cashier Code 1 with name “JONES” that
6. PROGRAMMING OPERATIONS EO1-11095 6-13 Deletion CONDITION After the Daily and GT Cashier’s Resets, (and his/her Sign OFF for Code Entry Type) OPERATION Mode Lock: SET . . . Submode No. Repeatable for another cashier to be deleted. 2 [@/FOR] [ITEM CORR] |Cashier Code| [NS] [AT/TL] or [VOID] NOTES: ...
Page 119 - Programming or Changing; Barcode Scanning; Whole Package Quantity
6. PROGRAMMING OPERATIONS EO1-11095 6-14 6.8 PLU TABLE PROGRAMMING (Submode 4) 6.8 PLU TABLE PROGRAMMING (Submode 4) This submode can be operated when new PLU items are to be added, PLU program data is to be changed, orPLUs are to be deleted. Programming or Changing CONDITION To program new PLUs or ...
Page 121 - Tax Status; Description of Programming Contents
6. PROGRAMMING OPERATIONS EO1-11095 6-16 NOTES: • Net to S.I. 1, 2 ........... Refer to the section of PRESET RATE SETTING FORSELECTIVE ITEMIZERS near the end of this chapter. • The HI-CONE Status (Code 6) requires setting of the Whole PackageQuantity (Address 8). Setting Examples: To set only Statu...
Page 122 - Small Bottle
6. PROGRAMMING OPERATIONS EO1-11095 6-17 -- Continued -- 6.8 PLU TABLE PROGRAMMING (Submode 4) Address No. Description of Programming Contents 10 Link-PLU Table No. (for PLU-to-PLU linking requirement only) • This entry is useful, when the PLU item entry should always be followed by another PLUitem ...
Page 124 - ADDITIONAL NOTES
6. PROGRAMMING OPERATIONS EO1-11095 6-19 6.8 PLU TABLE PROGRAMMING (Submode 4) PLU Address Address Address Address Address Address Address Address Address Address CODE 1 2 3 4 6 7 8 9 10 13 Linked Preset Status- Tax Split Whole PLU Link-PLU M & M Dept. PLU Name Price ON Status Package Package Gr...
Page 127 - PLU PROGRAMMED DATA COPYING
6. PROGRAMMING OPERATIONS EO1-11095 6-22 ex.) To program PLU 90701 (7-up Small-B) again that was once programmed and then deleted, bycopying the programmed data of PLU 90601 (CokeSmall-B): Mode Lock: SET, enter 4, depress [@/FOR]90701 [PLU] (PLU Code of the copy-destination)[NS]90601 [PLU] (PLU Code...
Page 129 - AMOUNT LIMIT SETTING FOR FUNCTION KEYS (Submode 8)
6. PROGRAMMING OPERATIONS EO1-11095 6-24 6.12 AMOUNT LIMIT SETTING FOR FUNCTION KEYS (Submode 8) This submode sets the high amount limit in finalizing transactions by tendering through each media key and alsosets the high and low amount limits in entering amount through departments. CONDITION Any ti...
Page 130 - Deletion of Individual Customer File Codes; Deletion of All Customer File Codes
6. PROGRAMMING OPERATIONS EO1-11095 6-25 15 [@/FOR] |Customer File Code| [ST] Character Entries [ST] [AT/TL] 6.13 CUSTOMER FILE CODE (CHECK TRACK NO.) AND NAME SETTING(Submode 15) This submode creates files for customers whose sales are to be processed using the check track memory. CONDITION Any tim...
Page 131 - CODE; ex.) To delete Customer File Code 104 that has once been programmed:
6. PROGRAMMING OPERATIONS EO1-11095 6-26 ex.) To program the following Customer File Codes with Customer Names: Mode Lock: SET CODE NAME Enter 15, depress [@/FOR]. 1 JAMES HAILY 1 [ST] (Customer File Code) 410 [#] 401 [#] 413 [#]405 [#] 503 [#] [#] 408 [#]401 [#] 409 [#] 412 [#]509 [#] [ST](NAME: JA...
Page 132 - SALESPERSON CODE AND NAME PROGRAMMING (Submode 20)
6. PROGRAMMING OPERATIONS EO1-11095 6-27 6.14 SALESPERSON CODE AND NAME PROGRAMMING (Submode 20) By programming Salesperson Codes here, those codes may be used in sales entries. In addition, the name ofeach salespersons can be programmed in maximum 12 characters. Programming CONDITION Any time outsi...
Page 134 - Deletion of Link-PLU Tables
6. PROGRAMMING OPERATIONS EO1-11095 6-29 ex.) To set the following Link-PLU Table and its Sub-link PLU: Link-PLU Table No. Sub-link PLU Code 1 101301 Mode Lock: SET, 25 [@/FOR] 1 [ST] 101301 [PLU] [AT/TL] 6.16 PLU PRESET-CODE KEY SETTING (Submode 27) TEC STORE 1343 PEACH DRIVE PHONE : 87-6437 Open 8...
Page 135 - ex.) To set the following PLU Codes to KEYs on the ECR keyboard:
6. PROGRAMMING OPERATIONS EO1-11095 6-30 6.16 PLU PRESET-CODE KEY SETTING (Submode 27) TEC STORE 1343 PEACH DRIVE PHONE : 87-6437 Open 8:00am to 7:00pmClosed: every Wednesday 12-19-1994 MON #3001 P27 #073 050321#074 050322 0017 Location Code (left side); refer to REMARKS 1 and 2 below.PLU Code assig...
Page 136 - ECR Ordinary Type Keyboard
6. PROGRAMMING OPERATIONS EO1-11095 6-31 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 9...
Page 137 - NEGATIVE AMOUNT KEY LIMIT AMOUNT SETTING (Submode 35)
6. PROGRAMMING OPERATIONS EO1-11095 6-32 6.17 NEGATIVE AMOUNT KEY LIMIT AMOUNT SETTING (Submode 35) Key Key Code 1 [VND CPN] 2 [STR CPN] 3 [BTL RTN] 4 [DOLL DISC] 6.17 NEGATIVE AMOUNT KEY LIMIT AMOUNT SETTING (Submode 35) This submode sets the limit amount to be entered through each of the negative-...
Page 139 - Setting or Changing Preset Price
6. PROGRAMMING OPERATIONS EO1-11095 6-34 6.19 PLU PRESET PRICE SETTING OR CHANGING, WHOLE PACKAGE QUANTITY CHANGING Max. 6 digits; 0 to 999999(result: $0,00 to $9999,99)(See NOTE on the nextpage.) Repeatable for other PLUs * Repeatable from here if the PLU Code is sequential. . . . Max. 6 digits * 6...
Page 140 - Setting or Changing Preset Price of Split Package Pricing PLU
6. PROGRAMMING OPERATIONS EO1-11095 6-35 6.20 %+ AND %- PRESET RATE SETTING Repeatable for other PLUs * Repeatable from here if the PLU Code is sequential. . . . Max. 6 digits * Setting or Changing Preset Price of Split Package Pricing PLU CONDITION Any time outside a sale OPERATION Mode Lock: SET |...
Page 141 - PRESET RATE SETTING FOR SELECTIVE ITEMIZERS (SI1 and SI2)
6. PROGRAMMING OPERATIONS EO1-11095 6-36 6.21 PRESET RATE SETTING FOR SELECTIVE ITEMIZERS (SI1 and SI2) TEC STORE 1343 PEACH DRIVE PHONE : 87-6437 Open 8:00am to 7:00pmClosed: every Wednesday 12-19-1994 MON #1 P00 %- 5% 0038 TEC STORE 1343 PEACH DRIVE PHONE : 87-6437 Open 8:00am to 7:00pmClosed: eve...
Page 142 - Selective Itemizer Functions and Applications; Key Operation in REG Mode; Example 2) With option “SI Special Discount”:
6. PROGRAMMING OPERATIONS EO1-11095 6-37 Selective Itemizer Functions and Applications The “Selective Itemizer” is a temporary total memory for each sale and is activated separately from the MainItemizer (i.e. sale total memory). If certain Department or PLU items are programmed with the SI (selecti...
Page 143 - FOREIGN CURRENCY EXCHANGE RATE SETTING; Foreign Currency Exchange Rate Calculation
6. PROGRAMMING OPERATIONS EO1-11095 6-38 6.22 FOREIGN CURRENCY EXCHANGE RATE SETTING ...... 6.22 FOREIGN CURRENCY EXCHANGE RATE SETTING In this program, the rate of each foreign currencies (corresponding to the [CUR 1] to [CUR 5] keys) will be set.By setting a rate on each Foreign Currency Key, read...
Page 144 - KEY OPERATION for setting the rates above:; Resetting a Foreign Currency Rate Once Set:; TAX TABLE PROGRAMMING
6. PROGRAMMING OPERATIONS EO1-11095 6-39 TEC STORE 1343 PEACH DRIVE PHONE : 87-6437 Open 8:00am to 7:00pmClosed: every Wednesday 12-19-1994 MON #1 P00 CUR3 1.455 * 0048 KEY OPERATION for setting the rates above: Mode Lock: SET 5 [ . ] 3729 [CUR 1] (for French Franc)1 [ . ] 7619 [CUR 2] (for Deutsche...
Page 145 - Repeat up to the “A” Break
6. PROGRAMMING OPERATIONS EO1-11095 6-40 6.23 TAX TABLE PROGRAMMING ...... ...... ...... ...... ...... (The description for the TAX RATE inTYPE 2 is also applied to this case.) TYPE 1: TAX 1 FULL BREAKS (COMBINATION OF NON-CYCLIC AND CYCLIC BREAKS) |Max.amount non-taxable| [TX1/M]|Max.amount for 1¢ ...
Page 147 - GST RATE SETTING
6. PROGRAMMING OPERATIONS EO1-11095 6-42 6.24 GST RATE SETTING TEC STORE 1343 PEACH DRIVE PHONE : 87-6437 Open 8:00am to 7:00pmClosed: every Wednesday 12-19-1994 MON #3001 P00 TAX300 $0.00 * 10% 0065 ex. 3) TAX 3 % RATE ONLY Tax Table Key Operation Mode Lock: SET 10 % is applied to any sale 0 [TX3/M...
Page 149 - VERIFICATION OF PROGRAMMED DATA
7. VERIFICATION OF PROGRAMMED DATA EO1-11095 7-1 7. VERIFICATION OF PROGRAMMED DATA 7. VERIFICATION OF PROGRAMMED DATA The programmed data entered in the preceding chapter can be read for verification purposes.The print format of each program reading is almost the same as on the program receipt, exc...
Page 150 - TAX CALCULATION TEST
7. VERIFICATION OF PROGRAMMED DATA EO1-11095 7-2 Displays the tax amount(Tax 1 + Tax 2 + Tax 3 +Tax 4) is displayed, issuinga receipt such as below. 7.1 TAX CALCULATION TEST 7.1 TAX CALCULATION TEST CONDITION Any time outside a sale OPERATION Mode Lock: X or SET Enter any amount. Depress [TXBL TL] N...
Toshiba 26C100U
User Manual
Toshiba 55SL412U
User Manual
Toshiba 50L5200U
User Manual
Toshiba 24V4210U
User Manual
Toshiba 40L3400U
User Manual
Toshiba 50L1350U
User Manual
Toshiba 24SLV411U
User Manual
Toshiba 50L2400U
User Manual
Toshiba 58L7350U
User Manual
Toshiba 50L1400U
User Manual