Toshiba SD-R2102- Manuals

4 USING THE CD-RW/DVD-ROM Combo Drive – SD-R2102 Drive Operation Inserting Media To insert media perform the following steps: Figure 1.Inserting Disc 1. Open the drive's loading tray by pressing the Eject Button and pulling out the tray. 2. Place media disc into drive's loading tray, and lightly pre...

5 Regional Coding Region Protection Coding (RPC) of DVD Discs: this feature is supported on DVD Players and is used with DVD-Video Discs (i.e. movies). Currently, the motion picture industry has divided the world into different regional "zones." These regions or "zones" correlate to ...

6 TROUBLESHOOTING – SD-R2102 Problem Solution Disc tray cannot be opened • Check that there is power to drive. • Use Emergency Eject instructions to open tray. Drive is not recognized by system • Is the drive connected properly? Are all cables plugged in properly (e.g. Power Cable, Interface Cable a...

7 SPECIFICATIONS – SD-R2102 General Interface: ATAPI Compatible CD-RW/DVD-ROM Standard - Write : Write Formats: CD-R, CD-RW: Disc at once, Track at once, session at once, Packet Write Write Disc: CD-R, CD-RW: CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CD-ROM, CD-ROM XA, MIXED MODE CD, CD-I, CD-I BRIDGE (Phot...

10 Drive Connectors – SD-R2102 Figure 1.SD-R2102 DVD Writeable Drive Rear Panel – Connector ATAPI Connector A 50-pin ATAPI interface connector is found at the rear of the SD-R2102 CD-RW/DVD-ROM Combo drive. Connecting cable should use Japan Aviation Electronics Industry Limited KX14-50Series L or eq...