Toshiba NPX10A - Manuals

5 Before Using 14. Do not place the product vertically Do not use the product in the up-right position or any other vertical positions to project the pictures. It may fall which could result in seri-ous injury and/or damage to the product. 15. Stack Inhibited Do not stack other equipment on this pro...

6 e) The product has been dropped or damaged in any way (If the cabi-net should break, please handle with care to avoid injury). f) The product exhibits a distinct change in performance, which indicates a need for service. 19. If glass components, including lens and lamp, should break, contact your ...

7 Before Using IMPORTANT PRECAUTIONS Moisture Condensation Never operate this unit immediately after moving it from a cold location to a warm location. When the unit is exposed to such a change in temperature, moisture may condense on the lens and the crucial internal parts. Do not use the unit for ...

8 EXEMPTION CLAUSES Toshiba Corporation bears no responsibility in the case of damages arising from natu-ral disaster such as earthquakes, lightning, etc., fire not liable to Toshiba Corporation, acts by third parties, other accidents, or use under abnormal conditions including erroneous or improper ...

9 Before Using Trademarks VGA, SVGA, XGA, SXGA, UXGA are trademarks or registered trademarks of Interna-tional Business Machines Corporation.DLP (Digital Light Processing) is a registered trademark of Texas Instruments, Inc.Macintosh is a registered trademark of Apple Computer, Inc.Windows is a regi...

10 Before Using SAFETY INFORMATION ..............................................................................................2IMPORTANT SAFETY INSTRUCTIONS ......................................................................2IMPORTANT PRECAUTIONS ..................................................

11 Others Trouble indicators .......................................................................................................39Before calling service personnel .................................................................................40Specifications .......................................

12 Please make sure that the following items are included in the box, along with the main unit. If any item is missing, immediately contact the store where you purchased the prod-uct. Checking the package contents (1) (3) (5) (2) (4) (6) (1) Remote control(2) CD-ROM (User’s Manual)(3) Quick Start Gu...

13 Preparations Name : Function (1) Lens : Projects expanded image. (2) Infrared remote sensor : Senses commands from the remote control. p.18 (3) Air exhaust : Expels hot air out of the projector. (4) Air intake : Draws in air from outside the projector for internal cool down. (5) Control panel : O...

14 Names of each part on the control panel zoom Name : Main Function (1) ON/STANDBY button/ : Turns the power on/off (standby). p.22 indicator : Displays power on/off mode. p.22 (1)

15 Preparations Names of each part on the remote control Name : Main Function (1) ON/STANDBY button : Turns the power on/off (standby). p.22 (2) IMAGE button : Changes picture mode. p.27 (3) COMPUTER button : Selects COMPUTER input source. (4) KEYSTONE +/- button : Adjusts keystone distortion. p.26 ...

16 Name : Main Function (13) D. ZOOM button : Zoom out or zooms in the projector display. p.28 (14) Selection buttons : Menu selections and adjustments. p.29 (15) VIDEO button : Selects VIDEO input source. (16) S-VIDEO button : Selects S-VIDEO input source. (17) RESET button : Resets all adjustments...

17 Preparations AUDIO-OUT AUDIO-IN SERIAL VIDEO S-VIDEO HDMI MONITOR-OUT COMPUTER-IN Parts on the rear panel Name : Main Function (1) COMPUTER IN terminal : Input analog RGB signal from a computer or other source, or a component video signal (Y/Pb/Pr) from video equipment. (2) MONITOR OUT terminal :...

18 Loading a coin cell battery into the remote control Notes When you use for the first time after purchase, a plastic sheet is provided between the battery and its contact. Be sure to remove by pulling it off.When operating the remote control from behind the projector, the infrared beam is reflected ...

19 Maintenance Placement Placement Styles As shown in the figures below, this device can be placed in 4 different styles.The factory setting is “floor-mounted front projection.” Set the [ Mounting ] in the Default setting menu. p.33 Floor-mounted front projection Floor-mounted rear projection Ceiling-...

20 Projection Distance and Size Use the figures, tables, and formulas below to determine the projection size and pro-jection distance. (Projection sizes are approximate values for full-size picture with no keystone adjustment.) Projection size (inches) Wide Tele Offset distance (a) distance (a) heigh...

21 Maintenance AUDIO-OUT AUDIO-IN SERIAL VIDEO S-VIDEO HDMI MONITOR-OUT COMPUTER-IN Connection Before connection Read the user’s manual of the device you are connecting to the projector.Some computers cannot be used with or connected to this projector.Check for an RGB output terminal, supported sign...

22 Connecting the power cord 1 Insert the power cord connector into the AC IN socket of the projector. 2 Insert the power cord plug into a wall or other power outlet. Removing the lens cover Turning the power on and off Be sure to remove the lens cover when the power is turned on. If the cover is le...

23 Maintenance Turning the power on and off (Continued) Turning the power off 1 Press the ON/STANDBY button. A message appears on the screen, confirming that you wish to shut off the power. To shut off the power, press the ON/STANDBY button again. If you do not wish to shut off the power, wait for a ...

24 1 Turn the power. Turn on the power by following the instructions in “Turning the power on” . p.22 2 Select the language (When using the first time). The screen turns off, but the internal cooling fan continues to operate for a short while. Then, the projector goes into standby mode. Use the , , o...

25 Operations 5 Projector placement angle adjustments. The placement angle and the height of the projected image can be adjusted by the foot adjuster. Lift up the front of the projector to the desired angle, then use the foot adjuster. To adjust the horizontal angle, use the tilt adjuster. To stow t...

26 Using the handy features Using auto setting (For computer input only) This function automatically sets up the projector to the optimum state. It sets up sampling phase, frequency and screen position for each type of the input signal by using simple operations. Press the remote control’s AUTO ADJ....

27 Operations Cutting off the picture and sound temporarily (Mute) When you want to project the images of another projector, overhead pro-jector, etc. temporarily, this projector’s images and sound can be turned off. Press the remote control’s AV-MUTE button. The picture and sound are cut off. (The ...

28 Resizing image The projected image can be resized (zoomed in/out). 1 Press the remote control’s D. ZOOM and buttons. Each time you press the button, zoom ratio is up. You can keep pressing. 2 Press the remote control’s D. ZOOM and buttons. Each time you press the button, zoom ratio is down. You c...

29 Operations You can call up on-screen menus, and conduct a number of adjustments and settings using the operation buttons on the remote control. p.15 How to use the menus The menu shown below is for operation instructions purposes and might differ from the actual display. 1. Press the MENU button ...

30 The image adjustment menu Use this menu to set or adjust image-related items. Items that can be set or adjusted are marked “Yes” , and those that cannot are marked “No” . (When an item is masked, it indicates that you cannot select for the current input.) Item Description RGB Y/Pb/Pb Video S-vide...

32 The screen setting menu Use this menu to set screen display-related items.(The items in gray color cannot be set with the current input selection.) Item Description Aspect Ratio Screen size setting. 4:3: This format is for 4x3 input sources. AUTO: Automatically selects the appropriate display for...

33 Operations The default setting menu This menu shows placement status and other settings. Items that can be set or adjusted are marked “ Yes ”, and those that cannot are marked “ No ”. (When an item is masked, it indicates that you cannot select for the current input.) Item Description Language Se...

34 The options setting menu Use this menu to set lamp-related and other settings.(The items in gray color cannot be set with the current input selection.) Item Description Input Search Set whether the input source with signals is only selected or not. On Off High Altitude Set whether to spin the the...

35 Maintenance The product’s light source is a mercury lamp that lights at increased internal pressure. Be sure to fully understand the following characteristics of the lamp and handle it with extreme care. The lamp may burst with a loud noise due to impact or deterioration, or fail to light at the ...

36 1 Unplug power cord. 2 Wait until lamp is suffi ciently cooled. Wait for at least 1 hour. 3 Remove the lamp cover. Loosen the two screws, raise the lamp cover with your fi ngers to remove the lamp cover. Use care to avoid any damage to nails and/or tip of your fi nger(s). If you have any diffi culty ...

37 Others 5 Mount the new lamp. Align the orientation, press down the new lamp until the bottom is reached, and lock in place using the two lamp locking screws. 6 Replace the lamp cover. Align the orientation, press down the new lamp until the bottom is reached, and lock in place using the two lamp ...

38 Lens and main unit cleaning WARNING Request cleaning and maintenance of a ceiling-mounted unit from your projector dealership. Attempting to clean or replace the lamp in a high location by yourself may cause you to fall, resulting in injury. Lens cleaning Clean the lens with a commercially availa...

39 Others Trouble indicators The indicator lights to inform you of internal abnormalities. Power LED Message (Blue) (Red) Off On In standby state When connecting the power cord, the projector will be in standby state.  On Off In normal state When turning the power on (press ON/STANDBY button), the ...

40 Before calling service personnel If you think something is wrong, check the followings before contacting customer service. Please see “ Trouble indications ” as well. p.39 If This Happens Check No power Is the power cord plugged in? Is it connected to the projector?Is the lamp cover attached prop...

41 Others Item Specification Consumption Power Normal mode: 255WStandby mode: <0.5 Watt Weight 2.3 kg External Dimensions(including protruding parts) 286 x 192 x 100 mm (W x D x H) Cabinet material PC resin Conditions for usage envi-ronment Temp: 5ºC ~ 35ºC; relative humidity: 20% ~ 80% Display pi...

45 Others Pin assignment of COMPUTER IN terminal Mini D sub 15 Pin connector 11 15 6 1 5 10 PinNo. Pin description During RGB input During Y/Pb/Pr input 1 Video signal (R) Color difference signal (Pr) 2 Video signal (G) Luminance signal (Y) 3 Video signal (B) Color difference signal (Pb) 4 N.C 5 GND...