Page 3 - Safety Summary; WARNING
(i) Safety Summary EO1-11115 Safety Summary Personal safety in handling or maintaining the equipment is extremely important. Warnings and Cautionsnecessary for safe handling are included in this manual. All warnings and cautions contained in thismanual should be read and understood before handling o...
Page 4 - CAUTION; Precaution
(ii) Safety Summary EO1-11115 CAUTION This indicates that there is the risk of personal Injury or damage toobjects if the machines are improperly handled contrary to this indication. If foreign objects (metal fragments,water, liquids) enter the machines,first turn off the power switches anddisconnec...
Page 5 - TABLE OF CONTENTS
EO1-11115 MA-186-100 SERIES TABLE OF CONTENTS Page 1. Introduction .................................................................................................................................... 1 2. Unpacking ........................................................................................
Page 9 - Insert the REG key into the Control Lock.
- 3 - EO1-11115 MA-186-100 SERIES 1 3. Outline of Preparation Procedure Before Operating the ECR This chapter shows the outline of set-up procedure of the ECR before actually starting the ECR operation. Remove the cash register from the carton, referringto Chapter 2. Unpacking on page 2. And take ou...
Page 10 - Turn the Control Lock to the REG position.; Install the paper roll
- 4 - EO1-11115 MA-186-100 SERIES Perform programming of the register, such as De-partments and PLUs, according to the require-ment of the market and your store (refer to Chap- ter 14 and thereafter). 7 8 If any optional keys are installed or relocated onthe keyboard, the optional key setting progra...
Page 11 - Appearance and Nomenclature
- 5 - EO1-11115 MA-186-100 SERIES 4. Appearance and Nomenclature Operator’s Display Used by the operator to confirm the entrycontents and the status of the register. (page7) Customer’s Display Provided for the customer to see the amountentered for each item and sale total. (page 7) Journal Window/Re...
Page 12 - Control Lock and Control Keys; Control Keys
- 6 - EO1-11115 MA-186-100 SERIES 5. Control Lock and Control Keys Control Keys There are three types of Control keys: the REG (registration) key, the MA (manager) key, and the S(service) key. REG Key: The REG key is used by the cashier or clerk who operates ordinary transac-tion entries. This key c...
Page 13 - PLU; AMOUNT; Customer’s Display; RPT
- 7 - EO1-11115 MA-186-100 SERIES AMOUNT PLU DP RPT TL ST CG SIGN ON ALM R OFF AMOUNT TL ST CG Customer’s Display SIGN ON ALM R OFF TL ST CG 6. Display The Operator’s Display (front display) is located at the top of the register just above the keyboard. TheCustomer’s Display may be used only as a re...
Page 14 - Numeric Display; PLU (3 digits of the DPT and RPT are used for this purpose):; ON
- 8 - EO1-11115 MA-186-100 SERIES Numeric Display AMOUNT (8 digits for total display, 7 digits for entries): Displays the numeric data, such as amount, quantity, etc. Whenthe obtained total or subtotal amount is 8-digit, the RPT digit isalso used for the amount display. When no entries are under way...
Page 15 - Standard Keyboard Layout
- 9 - EO1-11115 MA-186-100 SERIES 7. Keyboard The following is the standard keyboard layout, which was initially set at the factory. This register is designedto be capable of programming most of the keys at desired locations or adding some optional keys in placeof the current keys. If you are in nee...
Page 16 - Installing the Paper Roll; Cut the paper end to make it sharp.; Correct
- 10 - EO1-11115 MA-186-100 SERIES 8. Installing the Paper Roll The printer may be used for journal-format print (standard status) or receipt-format print (optional status).For reversing the status, refer to Chapter “16. System Option Setting”, Address 2-Bit 7” on page 72. 1 2 3 Turn the Control Loc...
Page 19 - Time and Date Setting; Time Setting or Adjustment; Thank you
- 13 - EO1-11115 MA-186-100 SERIES Examples) 1:05 a.m.: 1:32 p.m.: 9. Time and Date Setting Time Setting or Adjustment The register has a clock function. Once the time is set, the time is kept even when the power is turned off.The 24-hour system (the military time) is used for time setting, display,...
Page 20 - Receipt Print Format:; Date Setting or Adjustment
- 14 - EO1-11115 MA-186-100 SERIES Month-Day-Year order Month Day Year NOTE: The date set/print order is Month-Day-Year. If you want to change the order intoDay-Month-Year or Year-Month-Day, see Chapter “16. System Option Setting”,Address 16 - Bits 7 and 8 on page 81. Examples) To set 28 May, 1997: ...
Page 21 - (refer to the Receipt Print Format on the; Tax Table Setting
- 15 - EO1-11115 MA-186-100 SERIES Displaying the Time The current time is displayed in the “AMOUNT” area when the Control Lock is turned to REG from any otherposition. When the Control Lock position is changed or any entry operation starts, the displayed timedisappears. Time Display Format:(Example...
Page 25 - GST Rate Setting (applicable to Canada only)
- 19 - EO1-11115 MA-186-100 SERIES Examples) 7% 12% 8.55% To reset the rate once set: GST Rate Setting (applicable to Canada only) Please note the following before operating the GST rate setting. The following preparations are required: 1) Select the “GST Active” status in Chapter “16. System Option...
Page 27 - Tax Calculation Test; Optional Key Setting; List of Keys
- 21 - EO1-11115 MA-186-100 SERIES → |Amount| → Tax Calculation Test Tax calculation can be tested by the following procedure. This operation will not affect any sales data. Operating Procedure: Use the MA Key to turn the Control Lock to “X”. Enter any amountthrough NumericKeys. The enteredamount ...
Page 28 - Department Keys 1 to 20
- 22 - EO1-11115 MA-186-100 SERIES *1 *5 *2 *2 Key Code Key Name 85 NS (No-sale) 87 LC OPEN (Listing Capacity Open) 90 #/CID (Non-add Number/Cash-in- drawer) 91 #/NS (Non-add Number/No-sale) 92 PLU (Price-Look-Up) 93 @/FOR (At/For; Multiplication) 94 RECEIPT ISSUE (Post-receipt) 95 C (Clear) 97 TX/M...
Page 29 - Key Installation Setting; Use the S Key to turn the Control Lock to the “BLIND” position.; Blank Keyboard Sketch (for your planning aid)
- 23 - EO1-11115 MA-186-100 SERIES Fill in:Key Name → Key Code → (Refer to the “Listof Keys” on the pre-ceding page.) For the StandardKeyboard Layout,refer to Chapter “7.Keyboard” on page9. (The BLIND position is theunmarked step next to “Z”.) Only to read the Key Code currently set on the key...
Page 31 - Daily Operation Flow
- 25 - EO1-11115 MA-186-100 SERIES 12. Daily Operation Flow The following shows a typical daily operation flow on the register. Reference Chapter Before Opening the Store ... • Ensure that the register is firmly plugged in the wall outlet. • Check if enough portion of paper roll is left. • Check the...
Page 32 - Turn the Control Lock to the SET position using the MA key.; OPERATION FOR TRAINING MODE START
- 26 - EO1-11115 MA-186-100 SERIES 13. Training This chapter describes a training provided for new employed cashiers. After entering the training mode,a cashier may operate the same transaction entries as those in the REG mode. The data in the trainingmode is processed to the Electronic Journal buff...
Page 33 - Setting Preparation of Each Key and Transaction
- 27 - EO1-11115 MA-186-100 SERIES Training Start Receipt Training End Receipt Receipt issued in Training Mode Thank you Call again 05.- 28.- 9 7 ★ ★ ★ ★ 9 0 41.31 8 - 5 0 TT Thank you Call again 05.- 28.- 9 7 ★ ★ ★ ★ 0 0 41.41 8 - 5 3 TT Thank you Call again 05.- 28.- 9 7 ★ ★ ★ 10.0 0 ★ 2.5 0 ★ 12....
Page 37 - Paid Out; Department Keys; Programming Department Keys
- 31 - EO1-11115 MA-186-100 SERIES PO AT/TL . . . Paid Out <operable outside a sale only> A paid-out transaction is used when an amount of money is removed from the drawer without relating toa sale, for the purpose of paying to wholesalers, etc. This operation must be performed outside a sale ...
Page 38 - Department Status Programming:; “NOTE on Condition” on page 15)
- 32 - EO1-11115 MA-186-100 SERIES Department Status Programming: To use Department Keys, program how each Department Key is to be used, in accordance withmerchandise categories, operativity of the key, etc. Condition: After Daily Financial Reset and Periodical Financial Reset (and All PLU Reset if ...
Page 40 - Department Status Program Receipt Format:
- 34 - EO1-11115 MA-186-100 SERIES Thank you Call again 05.- 28.- 9 7 0.3 ★ 0 8 1 3 0 5 1 2 0 4 0 0 - 1 0 1 0 - 0 5 0 1 0 00.51 3 - 1 2 Dept. 10 RTN MDSE Department Status Program Receipt Format: Key Operation Control Lock: SET Key Type Status 0: Itemized1: Single-item4: Other Income (Itemized) 5: O...
Page 41 - Department LC Program Receipt Format:
- 35 - EO1-11115 MA-186-100 SERIES ex.) .......... indicates $ 39.99 .......... Allows to enter equal to or smaller than $39.99 in sale entries. Department LC (Listing Capacity) Programming: The LC setting is used to check an amount limit error. By setting the LC, an amount entry (due perhapsto a mi...
Page 42 - Department Preset Price Setting Receipt Format:; Department Preset Price Setting:; Condition: Any time outside a sale
- 36 - EO1-11115 MA-186-100 SERIES AT/TL NOTES: 1. All the Department Keys are open departments (no preset price set) as initial status. 2. If a Department Key is pressed with no Preset Price entry, the Key is set as an open-price Department Key. 3. If “0” is entered as Preset Price, the Department ...
Page 43 - Sale Item Entries Using Department Keys
- 37 - EO1-11115 MA-186-100 SERIES Dept. Price of the item(max. 7 digits; orlimited by theDepartment LC) . . . ( ) Dept. DPT SHIFT . . . To enter a sale item of theDepartment Nos. 21 to 40. If an error occurs here:Possible cause of error:• The price entered exceeds the LC. → See the Listing Capacity...
Page 46 - Single-item Department Entry
- 40 - EO1-11115 MA-186-100 SERIES PLU (PLU Key) CA Thank you Call again 05.- 28.- 9 7 0 7 ★ 10.0 0 ★ 10.0 0 0 10.50 9 - 1 2 ← Automatically finalized as cash sale (Cash Total) Single-item Department Entry If a Department key is programmed with single-item status, an entry through the key immediate...
Page 47 - Programming PLUs; Programming Procedure:; NOTES
- 41 - EO1-11115 MA-186-100 SERIES Programming PLUs PLU Table Setting: Condition: To change setting of a PLU: When the required PLU sales total memory is zero (i.e.,when no sales are made or after a PLU Reset Report is taken to reset the sales data of the PLU intozero)To add new PLUs: Any time outsi...
Page 48 - PLU Table Program Receipt Format:; Deleting Individual PLUs:
- 42 - EO1-11115 MA-186-100 SERIES Thank you Call again 05.- 28.- 9 7 0.4 ★ 00.5 0 4 ★ 1.0 0 @ 01.0 0 2 ★ 2.0 0 @ 01.1 0 1 ★ 1 23.0 0 @ 20.0 0 3 ★ 10.0 0 @ 05.0 0 5 ★ 0.5 0 @ 10.0 0 9 ★ 3.0 0 @ 15.0 0 9 @ 00.7 0 00.61 3 - 1 4 PLU Code LinkDepartmentNo. Preset Price Blank for Pre-set Price indi-cates...
Page 49 - PLU Deletion Receipt Format:; PLU Preset Price Changing:
- 43 - EO1-11115 MA-186-100 SERIES → PLU Code of PLUto be deleted PLU Code deleted Deletion Symbol LineTotal number of PLUsremaining set in memory Thank you Call again 05.- 28.- 9 7 0.4 ★ 01.0 - - - - - - - - - 00.6 0 00.71 3 - 1 6 VD ITEM CORR 4 @/FOR 0 1 AT/TL PLU ( ) or Repeat for other PLUs,...
Page 50 - Sale Item Entries of PLUs
- 44 - EO1-11115 MA-186-100 SERIES PLU Price Change Setting Receipt Format: Key Operation Control Lock: SET PLU Code New Preset Price 1 1 AT/TL PLU PLU Code Link Department No.New Preset Price Thank you Call again 05.- 28.- 9 7 0.0 ★ 01.1 0 1 ★ 1 23.4 5 @ 0 02.10 8 - 5 9 PL 5 #/CID 3 2 1 4 Z OFF X R...
Page 51 - Repeat Entry
- 45 - EO1-11115 MA-186-100 SERIES PLU To repeat PLU PLU Code PL PL TM TM 20.0 ★ 10.0 0 20.0 ★ 10.0 0 . . . Price PLU PLU Code To repeat AMT AMT PL TM . . . @/FOR Quantity PLU Code PLU . . . PLU Code PLU Quantity 4. X ★ 10.0 0 @ 20.0 ★ 40.0 0 . . . @/FOR Unit Price AMT ← ←← ← Quantity Unit Price...
Page 52 - Single-item PLU Entry; Listing Capacity Open; Percent Charge, Percent Discount
- 46 - EO1-11115 MA-186-100 SERIES PL CA Thank you Call again 05.- 28.- 9 7 10.1 ★ 3.4 0 ★ 3.4 0 0 10.70 9 - 1 8 (Listing Capacity Open Key) LC OPEN LC OPEN % + % – Single-item PLU Entry If a Department key is programmed with Single-item Status, an entry through a PLU which links tothe Department im...
Page 53 - % Key Preset Rate Setting or Changing
- 47 - EO1-11115 MA-186-100 SERIES Z OFF X REG SET for %- rate for %+ rate This portion is required only when anydecimal portion is contained in the rate. % rate 0 to 99.999 % + • % – • 0 7 2 5 1 5 4 5 • 3 • 8 %- 5% is set. %+ 10% is set. Thank you Call again 05.- 28.- 9 7 0.0 ★ 5. % - 0 01.40 8 - 5...
Page 54 - % Key Operations in Sale Entries; Status Modification” on page 56 for reversing the status.
- 48 - EO1-11115 MA-186-100 SERIES . . . %- Manual Rate %- %+ %+ 0 1 ★ 6.0 0 5. % - -0.3 0 Manual Rate ← Dept 1 $6.00 5% on $6.00 = $0.30is discounted. %- %+ %+ ★ 15.0 0 10. % + ★ 1.5 0 ST ← Subtotal $15.00obtained 10% on $15.00 = $1.50 is added. . . . TM Z OFF X REG SET %- ST % Key Operat...
Page 55 - Dollar Discount; “Tax Status Modification” on page 56 for reversing the status.
- 49 - EO1-11115 MA-186-100 SERIES DOLL DISC . . . Amount to be discounted (max. 7 digits) An amount of $0.40 is entered asDollar Discount -0.4 0 ← (Dollar Discount Key) Z OFF X REG SET ST ITEM CORR (Item Correct Key) Dept 1 $6.00 is entered but item-corrected. ITEM CORR 0 1 ★ 6.0 0 0 1 ★ 6.0 0 VD T...
Page 57 - Returned Merchandise
- 51 - EO1-11115 MA-186-100 SERIES ALL VOID (All Void Key) Thank you Call again 05.- 28.- 9 7 0 2 ★ 4.5 0 14. X 0.3 0 @ 0 3 ★ 4.2 0 20.0 ★ 10.0 0 ★ 18.7 0 ★ ★ ★ ★ ★ ★ 0 12.71 3 - 4 2 ITEM CORR C ← Prints the subtotalwhen TransactionCancel is executed. PL VD ST TM TM TM ← All Void (TransactionCanc...
Page 59 - Subtotal Read
- 53 - EO1-11115 MA-186-100 SERIES Symbol for Subtotal ★ 22.9 1 ST Subtotal Amount ← ← ST (Subtotal Key) Z OFF X REG SET ST .......... Z OFF X REG SET TXBL TL (Taxable Total Key) TXBL TL Subtotal Read When the sale total of the current sale is to be read by the customer’s request or the operator’s ...
Page 62 - Tax Status Modification
- 56 - EO1-11115 MA-186-100 SERIES Each of these keys is used to reverse the tax status of a required Department or PLU item to be enteredin a sale. It is also used to reverse the Non-taxable status of [% +], [% -], and [DOLL DISC] keys intoTaxable status. The Modifier Keys are effective only for on...
Page 63 - Tax Exemption
- 57 - EO1-11115 MA-186-100 SERIES EX EX The sale portion (pre-taxed amount) subject to the tax exemption (Tax/PST 1 in this example). Sale portion (pre-taxed)exempted from GSTSale portion (pre-taxed)exempted from Tax/PST 1Sale portion (pre-taxed)exempted from Tax/PST 2 ★ 1.0 0 1 EX ← EX EX EX EX At...
Page 64 - • GST
- 58 - EO1-11115 MA-186-100 SERIES Print/Non-print Options on Sale Receipts The following are items that can be programmed to be printed or not on sale receipts.To change the print/non-print status, refer to Chapter “16. System Option Setting” on page 69. Forchanging the print/non-print status of ea...
Page 65 - Read and Reset Reports; Programming Operations Relating to Reports; Programming Hourly Range Table; Condition: After Hourly Sales Reset
- 59 - EO1-11115 MA-186-100 SERIES (or ) Declaration of Program No.7 for Hourly Range Tableprogramming Hour (0 to 23) Repeat for setting next Hourly Ranges (max. 24 hourly ranges) Z OFF X REG SET 7 AT/TL Enter the time that ends the HourlyRange, in the 24-hour system using themilitary time. (The tim...
Page 66 - Selecting Print/Non-print Items on Reports
- 60 - EO1-11115 MA-186-100 SERIES 7 0 #/CID AT/TL @/FOR 7 0 0 0 1 AT/TL Thank you Call again 05.- 28.- 9 7 0.7 ★ 0 8 - 0 00 9 - 0 01 0 - 0 01 3 - 0 01 6 - 3 01 8 - 0 00 01.00 8 - 5 1 @/FOR 0 0 8 0 0 9 0 0 3 1 0 3 6 1 0 0 8 1 #/CID #/CID #/CID #/CID #/CID #/CID Item Initial Status System Option Befo...
Page 67 - Taking Read and Reset Reports; Fundamental Concepts of Various Types of Reports; Periodical Read Report:; Report Taking Operation
- 61 - EO1-11115 MA-186-100 SERIES Taking Read and Reset Reports Fundamental Concepts of Various Types of Reports Four types of Reports are available in connection with the Control Lock positions and the periods of dataaccumulation: Daily Read Report: It can be issued at any time and any number of t...
Page 68 - Report Sample Format:
- 62 - EO1-11115 MA-186-100 SERIES DPT SHIFT Report Name Key Operation Sample Page * Financial Read Control Lock: X 63 * Financial Reset (NOTE 2) Control Lock: Z Hourly Sales Read Control Lock: X 66 Hourly Sales Reset Control Lock: Z All PLU Sales Read Control Lock: X 66 All PLU Sales Reset Control ...
Page 69 - Financial Read or Reset Report (Daily or Periodical)
- 63 - EO1-11115 MA-186-100 SERIES Thank you Call again 05.- 28.- 9 7 Z ★ 13.4 05.7 1 5 06. ★ 13.4 05.7 1 0 1 1 0 21. ★ 42.7 5 0 2 4 63. ★ 31.0 6 0 3 8 3 84. ★ 12.0 75.5 0 0 4 2 2. -2.0 0 0 5 1 3. ★ 1.5 0 0 6 0 0. ★ 0.0 0 0 7 1 1. ★ 10.0 0 0 8 0 0. ★ 0.0 0 0 9 1 4. - 12.0 0 1 0 0 0. ★ 0.0 0 4 0 0 @ ...
Page 71 - Grand Total; Gross Sale; Net Sale with Tax; Sum of All Hourly Range Sales
- 65 - EO1-11115 MA-186-100 SERIES - Memory Balance - Grand Total = Sum of Daily Gross Sales Gross Sale = (Sum of Depts) + (Sum of Tax/PST 1 & 2) + (Percent Charge) NOTE below + (Percent Discount on Item) + (Sum of Negative Depts) + (Item Correct)+ (Void) + (Returned Merchandise) + (Negative Tax...
Page 72 - Daily Hourly Sales Read or Reset Report; Daily PLU Read or Reset Report (All or Zone)
- 66 - EO1-11115 MA-186-100 SERIES Daily Hourly Sales Read or Reset Report Thank you Call again 05.- 28.- 9 7 1 0 Z ★ ★ 0 8 - 0 00 9 - 0 0 9 ★ 69.1 8 1 0 - 0 0 7 ★ 48.6 6 1 3 - 0 01 6 - 3 01 8 - 0 0 00.0 1 Z 0 04.81 3 - 4 3 CU CU Report Type Symbol Sales Data in Hourly Range from 18:00 yesterday to ...
Page 73 - Daily Media Sales & In-drawer Read Report; Cashier Read or Reset Report (Daily or Periodical); Daily Cashier Read or Reset Report
- 67 - EO1-11115 MA-186-100 SERIES Daily Media Sales & In-drawer Read Report Thank you Call again 05.- 28.- 9 7 X 1 6 ★ 1 17.8 4 ★ 1 05.9 3 2 ★ 10.5 0 2 ★ 7.4 1 0 04.71 3 - 4 2 CU CH CK ID ID ID TL Report Type Symbol (Daily Read Report only) Total Customer Count All Media Sales Amount Cash-in-dr...
Page 74 - Daily Individual Department Read Report; Periodical Cashier Read or Reset Report
- 68 - EO1-11115 MA-186-100 SERIES Daily Individual Department Read Report Periodical Cashier Read or Reset Report Report Type Symbol Thank you Call again 05.- 28.- 9 7 4 Z ★ ★ 1 1 1 33.4 5 ★ 72.6 5 0. @ ★ 0.0 0 @ ★ ★ 2 ★ ★ 8 00.0 1 Z 0 05.01 3 - 4 3 CL CL GS GS CU CL 4X: Periodical All Cashier Read...
Page 75 - System Option Setting; Programming Procedure
- 69 - EO1-11115 MA-186-100 SERIES Repeat for Bit status changes in all the required Addresses. Bit Nos. that are set to “SET” status(max. 8 Bit Nos. combination of 1 to 8) Address No. (max. 2digits; 1 to 16) ( ) or Z OFF X REG SET 8 1 @/FOR → ST #/CID AT/TL #/NS 16. System Option Setting This op...
Page 76 - Programming Example) To select the following options:
- 70 - EO1-11115 MA-186-100 SERIES NOTES: 1. Do not program any Bit No. shaded and filled with “vacant” in the Address tables on the following pages. If programmed, performance of the register will not be guaranteed. 2. The Initial Status of each Bit is indicated by a dotted frame such as: If you ha...
Page 77 - Your Selection
- 71 - EO1-11115 MA-186-100 SERIES Content Bit No. Selective Status RESET SET Time on Journal and every Receipt in REG, X, Z, SETmodes Purchased Item Count on Sale Receipts Manual Subtotal on Sales Receipts GT (Grand Total) on Financial Reports (in X and Z modes) -- vacant -- Sum of Negative Departm...
Page 90 - Reading of the Remaining Lines of E.J. Memory; Electronic Journal Report; Operation
- 84 - EO1-11115 MA-186-100 SERIES Reading of the Remaining Lines of E.J. Memory This operation is used to display the remaining number of lines in the E.J. buffer. The remaining numberof lines is displayed in the Amount portion of the display. Operation ST 1 1 1 1 Fixed code for ElectronicJournal o...
Page 92 - Program Data Verification; Operating Procedure
- 86 - EO1-11115 MA-186-100 SERIES Format Contents to be Printed for Verification Page Department Preset Price Read: 87 Preset Price of each Department Department LC and Status Read: 87 LC(Listing Capacity) and Status of each Department PLU Table Read: 88 Preset Price and Link Department of each PLU...
Page 93 - Department Preset Price Read
- 87 - EO1-11115 MA-186-100 SERIES Thank you Call again 05.- 28.- 9 7 X 0 1 01. 7 3 0 2 02. 9 4 0 3 00. 5 7 0 4 00. 0 0 - 0 5 00. 0 0 0 6 00. 0 0 0 7 10. 0 0 0 8 10. 0 0 0 9 00. 0 0 1 0 10. 0 0 - 0 01.80 9 - 0 3 Thank you Call again 05.- 28.- 9 7 X 0 1 @ 0 2 @ 0 3 @ 0 4 ★ 1.0 0 @ 0 5 ★ 2.0 0 @ 0 6 @...
Page 94 - PLU Table Read; Other Programmed Data Read
- 88 - EO1-11115 MA-186-100 SERIES PLU Table Read Thank you Call again 05.- 28.- 9 7 X 00.5 0 4 ★ 1.0 0 @ 01.1 0 1 ★ 1 23.4 5 @ 05.0 0 5 ★ 0.5 0 @ 06.0 1 0 ★ 3.0 0 @ 07.0 0 3 @ 07.1 0 8 ★ 8.0 0 @ 07.2 0 9 ★ 9.0 0 @ 19.9 0 3 ★ 10.0 0 @ 0 01.90 9 - 0 4 ← PLU Code Link Department No. Preset Price (Bl...
Page 95 - System Option Read
- 89 - EO1-11115 MA-186-100 SERIES Thank you Call again 05.- 28.- 9 7 X 0 1 2 6 0 2 7 8 0 3 0 0 4 0 0 5 0 0 6 0 0 7 1 3 0 8 1 0 9 0 1 0 0 1 1 6 8 1 2 0 1 3 2 1 4 4 5 1 5 4 1 6 2 8 0 02.20 9 - 0 8 Address No. SET Bit Nos. ← ↓ System Option Read NOTE: The above sample shows the initial SET Bit Nos. ...
Page 96 - Paper Roll Replacement and Other Maintenance; Replacing the Paper Roll (When used for receipt); Cut the paper as shown in the figure.
- 90 - EO1-11115 MA-186-100 SERIES 1 2 3 Turn the Control Lock to the REG positionusing the Control Key. To remove the Printer Cover, insert thePrinter Cover Key to the Printer CoverLock, and then turn it 90 ° clockwise. Z OFF X REG SET 20. Paper Roll Replacement and Other Maintenance Replacing the ...
Page 97 - Replacing the Paper Roll (When used for journal)
- 91 - EO1-11115 MA-186-100 SERIES 4 Depress the [FEED] key to feed the re-maining paper end. CAUTION: Never try to pull out the re-maining paper end by hand.It may cause a paper jam. Replacing the Paper Roll (When used for journal) After a reset report is taken or when a red line appears on the edg...
Page 99 - Replacing the Ink Ribbon
- 93 - EO1-11115 MA-186-100 SERIES Replacing the Ink Ribbon This ink ribbon is a consumable part and a TOSHIBA TEC’s exclusive. Ask yourTOSHIBA TEC representative about the order of the ink ribbon. 1 Turn the Control Lock to the OFF position usingthe Control Key. 2 3 To remove the Printer Cover, ins...
Page 101 - Replenishing Ink to the Store Name Stamp
- 95 - EO1-11115 MA-186-100 SERIES 1 Replenishing Ink to the Store Name Stamp Turn the Control Lock to the OFF positionusing the Control Key. 2 3 To remove the Printer Cover, insert thePrinter Cover Key to the Printer CoverLock, and then turn it 90 ° clockwise. Remove the Stamp from the Stamp PrintU...
Page 102 - Manual Drawer Release and Lock; Releasing
- 96 - EO1-11115 MA-186-100 SERIES 5 Return the stamp in the reverse procedure. 6 After replenishing ink, depress the [NS]key to check the density of the printedmessage. * Ordering a Store Name Stamp which contains your store name, address, andtelephone No., etc. is available. Refer topage 109 for d...
Page 104 - NOTE: Do not mix used and new batteries; in the battery compartment.; Changing the Layout of the Money Case
- 98 - EO1-11115 MA-186-100 SERIES Remove the paper roll, the Take-up Reel (ifused for Journal), and the Battery Cover. 3 Replace the old batteries with new ones.(Batteries: SUM-3 1.5V x 3 pieces) NOTE: Do not mix used and new batteries in the battery compartment. Return the items removed in Step 3,...
Page 106 - In Case of the Power Failure
- 100 - EO1-11115 MA-186-100 SERIES 21. In Case of the Power Failure If a power failure occurs during business hours, all sales data stored in the memory are automaticallyprotected by the batteries installed in the register. When any data was being printed on the power failure,the same data is autom...
Page 108 - Normal operations cannot be carried out.
- 102 - EO1-11115 MA-186-100 SERIES 3. Trouble concerning KeyboardKey on the keyboard does not function. Cause 1: Control Lock is in the OFF position. Measure: Turn the Control Lock to the positions other than OFF using the Control Key. Cause 2: Failure of the keyboard itself Measure: Ask the store ...
Page 109 - Error tone beeps
- 103 - EO1-11115 MA-186-100 SERIES Error tone beeps Cause 1: Operation procedure is incorrect. Measure: Depress the [C] key to clear the error, then check the operation procedure you attempted. Cause 2: Control Lock position is incorrect. Measure: Turn the Control Lock to the correct position using...
Page 110 - Status Clear and Memory Clear Operations; Status Clear; Condition: Any time, outside or during any operation sequence
- 104 - EO1-11115 MA-186-100 SERIES Use the S Key to turn the ControlLock to “BLIND”. 23. Status Clear and Memory Clear Operations The operations described in this chapter are provided for initial start-up of the machine or emergency butnot to be operated as part of daily routines. Do not perform an...
Page 111 - Sales Memory Clear
- 105 - EO1-11115 MA-186-100 SERIES Depress the following Numeric Key according to the display and print format for zero amount: Sales Memory Clear The operation defined as “Sales Memory Clear” will only clear the sales data accumlated in the register’smemory (report memory). The programmed data wil...
Page 112 - All Memory Clear
- 106 - EO1-11115 MA-186-100 SERIES Z OFF X REG SET (BLIND) Numeric Key 3 Zero-amount Format 0 . 0 0 . 0 for use in US or Canada AT/TL 9 1 9 All Memory Clear If the register becomes completely inoperative due to battery discharge or malfunction of the programmemory, the All Memory Clear operation mu...
Page 114 - Memory Protection; Handling the Batteries
- 108 - EO1-11115 MA-186-100 SERIES Memory Protection Dry Battery SUM-3 1.5 x 3 pieces; Life of about 1 year.(Be certain to replace batteries with new ones every year.) Handling the Batteries • When inserting batteries, place them so that the positive (+) and negative (-) ends face the proper direct...
Page 115 - STAMP ORDER; TEC STAMP ORDER FORM
- 109 - EO1-11115 MA-186-100 SERIES STAMP ORDER Dear Customer; A Receipt Stamp (Electro-stamp) “Thank you Call again” comes with each unit. If you prefer printing your companyname or message to Thank you Call again for receipt inprint, please place your order by using the order formbelow. Please com...
Page 119 - TEC; TEC CORPORATION
Toshiba 26C100U
User Manual
Toshiba 55SL412U
User Manual
Toshiba 50L5200U
User Manual
Toshiba 24V4210U
User Manual
Toshiba 40L3400U
User Manual
Toshiba 50L1350U
User Manual
Toshiba 24SLV411U
User Manual
Toshiba 50L2400U
User Manual
Toshiba 58L7350U
User Manual
Toshiba 50L1400U
User Manual