Toshiba M750 - Manuals

6 5.375 x 8.375 ver 2.3 Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or ...

7 5.375 x 8.375 ver 2.3 Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖ The IEEE 802.11 Standard on Wireless LANs ...

8 5.375 x 8.375 ver 2.3 Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Wireless LAN is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and res...

9 5.375 x 8.375 ver 2.3 Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. L’ utilisation de ce dispositif est soumis aux deux co...

10 5.375 x 8.375 ver 2.3 The European Union WEEE (Waste from Electrical and Electronic Equipment) Directive Information The European Union WEEE (Waste from Electrical and Electronic Equipment) Directive is intended to protect the quality of the environment and human health through the responsible us...

11 5.375 x 8.375 ver 2.3 However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point. In the event of problems, you should contact yo...

12 5.375 x 8.375 ver 2.3 2. Indication The indication shown below appears on this equipment. 1 2.4: This equipment uses a frequency of 2.4 GHz. 2 DS: This equipment uses DS-SS modulation. OF: This equipment uses OFDM modulation. 3 The interference range of this equipment is less than 40m. 4 This equ...

13 5.375 x 8.375 ver 2.3 Radio Approvals for Wireless Devices The following information is dependent on what type of wireless device is in your computer. Not all devices are available on all models. Approved Countries/Regions for the Intel ® Wireless Wi-Fi ® Link 5000 Series This equipment is approv...

18 5.375 x 8.375 ver 2.3 Approved Countries/Regions for the Realtek ® RTL8187B This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Albania Argentina Australia Austria Azerb...

20 5.375 x 8.375 ver 2.3 An adhoc mode is available in Ch1-Ch11(802.11b/g), An Infrastructure mode is available in Ch1-Ch11 (802.11b/g) Ch36,40,44,48,52,56,60,64,149,153,157,161,165 (802.11a). 11a, 11b, 11g and 11n wireless are based on IEEE 802.11a, 802.11b, 802.11g and 802.11n respectively. The IE...

21 5.375 x 8.375 ver 2.3 Bluetooth wireless technology is a new innovative technology, and TOSHIBA has not confirmed compatibility of its Bluetooth products with all computers and/or equipment using Bluetooth wireless technology other than TOSHIBA portable computers. Always use Bluetooth cards from ...

22 5.375 x 8.375 ver 2.3 Bluetooth ® Wireless Technology and Your Health The products with Bluetooth ® wireless technology, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by devices with Bluetooth wireless technology however is much less than the e...

23 5.375 x 8.375 ver 2.3 Exposure to Radio Frequency Radiation The radiated output power of the Bluetooth Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Card from TOSHIBA shall be used in such a manner that the potential for human contact during n...

25 5.375 x 8.375 ver 2.3 Device Authorization This device obtains the Technical Regulation Conformity Certification, and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Radio Law of Japan. The Name of the radio equipment: EYXF2...

27 5.375 x 8.375 ver 2.3 Trademarks Portégé and ConfigFree are registered trademarks of Toshiba America Information Systems, Inc. and/or Toshiba Corporation. Microsoft, Outlook, Windows, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States an...

28 5.375 x 8.375 ver 2.3 Contents Introduction................................................................................ 36 This guide ...............................................................38Safety icons ............................................................39 Other icons used ....

29 Contents 5.375 x 8.375 ver 2.3 Using the computer for the first time ......................50 Opening the display panel .................................50Your computer’s features and specifications ....51Turning on the power .......................................51 Adding memory (optional) .......

30 Contents 5.375 x 8.375 ver 2.3 Caring for your computer........................................87 Cleaning the computer ......................................88Moving the computer ........................................88Using a computer lock ......................................88 Chapter 2: L...

32 Contents 5.375 x 8.375 ver 2.3 Surfing the Internet .........................................133Internet features..............................................133Uploading to, and downloading files from, the Internet ..............................................134 Exploring audio features ........

34 Contents 5.375 x 8.375 ver 2.3 ConfigFree ® ...........................................................185 Getting Started ................................................185ConfigFree ® Utilities ........................................186 Important information for Wireless Key Logon .....188 Ch...

35 Contents 5.375 x 8.375 ver 2.3 Appendix A: Hot Keys/TOSHIBA Cards ................................. 221 Hot Key Cards .......................................................221 Using the Hot Key Cards .................................222 Application Cards ............................................

36 Introduction Welcome to the world of powerful, portable, multimedia computing. With your Toshiba computer, your work and entertainment can accompany you wherever you go. Your Computer model may be ENERGY STAR ® compliant. If the model you purchased is compliant, it is labeled with the ENERGY STAR...

38 Introduction This guide 5.375 x 8.375 ver 2.3 The product specifications and configuration information are designed for a product Series. Your particular model may not have all the features and specifications listed or illustrated. For more detailed information about the features and specificatio...

39 Introduction Safety icons 5.375 x 8.375 ver 2.3 Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the ser...

40 Introduction Other documentation 5.375 x 8.375 ver 2.3 Other documentation Your computer comes with the following documentation: ❖ An electronic version of the user’s guide (this document) ❖ It may also contain guides for other programs that may come with your system. For accessory information, v...

41 Chapter 1 Getting Started This chapter provides tips for using your computer effectively, summarizes how to connect components, and explains what to do the first time you use your computer. The “Instruction Manual for Safety and Comfort,” that is shipped with your computer, contains important saf...

42 Getting Started Selecting a place to work To keep your computer in prime operating condition, protect your work area from: ❖ Dust, moisture, and direct sunlight. ❖ Equipment that generates a strong electromagnetic field, such as stereo speakers (other than speakers that are connected to the compu...

44 Getting Started Setting up your computer Important information on your computer’s cooling fan Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer. Always make sure your computer and AC adaptor have adequate ventilation and are protected from overhe...

45 Getting Started Setting up your computer Please handle your computer carefully to avoid scratching or damaging the surface. Setting up your software When you turn on the computer for the first time, do not turn off the power again until the operating system has loaded completely. The names of win...

46 Getting Started Registering your computer with Toshiba Registering your computer with Toshiba Product registration is strongly recommended, and allows Toshiba to send you periodic updates, announcements, and special offers applicable to your product. Product registration can be completed by eithe...

47 Getting Started Connecting to a power source Connecting to a power source Your computer requires power to operate. Use the power cord/cable and AC adaptor to connect the computer to a live electrical outlet, or to charge the computer’s battery. Never pull on a power cord/cable to remove a plug fr...

49 Getting Started Charging the main battery The computer’s main battery light gives you an indication of the main battery’s current charge: ❖ Glows amber while the main battery is being charged (AC adaptor connected) ❖ Glows green when the main battery is fully charged ❖ Is unlit when the main batt...

50 Getting Started Using the computer for the first time Battery life and charge time may vary depending on the applications, power management settings, and features used. Using the computer for the first time The computer is now ready for you to turn it on and begin using it. Opening the display pa...

51 Getting Started Using the computer for the first time Small bright dots may appear on your screen display when you turn on your computer. Your display contains an extremely large number of thin-film transistors (TFT) and is manufactured using high-precision technology. Any small bright dots that ...

53 Getting Started Adding memory (optional) Installing a memory module A memory module can be installed in the memory module slot on the base of the computer. You will need a small Phillips screwdriver for this procedure. If the computer has been running recently, the memory module may be hot. The s...

54 Getting Started Adding memory (optional) 2 Click Shut Down. The operating system turns off the computer. 3 Unplug and remove any cables connected to the computer, including the AC adaptor. 4 Remove the main battery. For information on removing the main battery, see “Removing the battery from the ...

58 Getting Started Adding memory (optional) 15 Re-insert the main battery. For more information on inserting the main battery, see “Inserting a charged battery” on page 121 . 16 Turn the computer right side up. 17 Reconnect the cables. 18 Restart the computer. TECHNICAL NOTE: You must have at least ...

60 Getting Started Adding memory (optional) 4 Replace the memory module slot cover and secure it using the screw. 5 Re-insert the main battery. For more information on inserting the main battery, see “Inserting a charged battery” on page 121 . 6 Turn the computer right side up. 7 Reconnect the cable...

61 Getting Started Hard Drive Recovery Utilities Hard Drive Recovery Utilities (Available on certain models) Your computer has been configured with a hard disk partition to allow you to recover your hard disk drive or reinstall selected applications and software features or utilities. ❖ During the H...

62 Getting Started Hard Drive Recovery Utilities To create recovery DVDs: 1 Click Start, All Programs, Toshiba, Recovery, and then Recovery Disc Creator. 2 Select DVD (to create Recovery media on DVDs). 3 Select the items you want to copy by clicking the check box next to the item’s Name—recovery fi...

65 Getting Started Hard Drive Recovery Utilities 2 Select Recover to out-of-box-state, and then click Next. A confirmation message displays reminding you that all data will be lost during the recovery process. Be sure to save your work to external media before proceeding. 3 Click Next to begin the r...

66 Getting Started Hard Drive Recovery Utilities (Sample Image) Erase the hard disk screen 3 Select the desired method, and then click Next. A confirmation message displays reminding you that all data will be lost. Be sure you have saved your work to external media before proceeding. 4 Click Next to...

67 Getting Started Hard Drive Recovery Utilities To recover only your C: drive: 1 On the Toshiba Recovery Wizard Screen, select Recovery of Factory Default Software, and then click Next. 2 Select Recover without changing the hard drive partitions. A confirmation message appears, reminding you that a...

68 Getting Started Hard Drive Recovery Utilities Hard Disk Drive Recovery using the Recovery media If you need to recover your computer to its default factory state, you can rebuild the system using your Hard Drive Recovery Utilities. To recover your hard disk drive using the utilities burned to DVD...

70 Getting Started Hard Drive Recovery Utilities 7 The Toshiba Recovery Wizard screen will appear. Please refer to “Hard Disk Drive Recovery options” on page 62 to explain the available recovery options. (Sample Image) Toshiba Recovery Wizard screen Checking the HDD operating status After restoring ...

71 Getting Started Using the TouchPad™ 4 Click Install. 5 Follow the on-screen prompts to complete the installation process. Using the TouchPad ™ The TouchPad ™ , the small, rectangular area located in front of the keyboard, is sensitive to touch and enables you to move the cursor with the stroke of...

72 Getting Started Using external display devices The function of the secondary (right-hand) button depends on the program you are using. It usually corresponds to the right mouse button (“right-clicking”). Check your program’s documentation to determine whether it uses the right mouse button. Disab...

73 Getting Started Using external display devices Directing the display output when you turn on the computer Once you have connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously. Some modes are only available with the a...

74 Getting Started Using an external keyboard Adjusting the quality of the external display To obtain the best picture quality from your television (or other video display device), you may need to adjust the video settings. See the video device documentation for additional configuration steps. Using...

75 Getting Started Connecting a printer To connect a printer to your computer: 1 Connect the printer cable to the printer and then connect the other end to one of the computer’s USB ports. 2 Plug the printer’s power cable into a live AC outlet. Setting up a printer Some printers require a specific i...

76 Getting Started Connecting an optional external diskette drive Connecting an optional external diskette drive Some operations, such as creating a password service diskette, require a diskette drive designed for use with 3.5-inch diskettes. (Sample Illustration) Optional external USB diskette driv...

77 Getting Started Turning off the computer Options for turning off the computer Depending on the operating system installed, you have more than one option available for turning off the computer: Shut Down, Hibernate, and Sleep. Each option has its advantages. ❖ Use the Shut Down or Hibernate comman...

78 Getting Started Turning off the computer For information on how to use and configure Hibernation mode see “Using and configuring Hibernation mode” on page 81 . Sleep mode The Sleep command places the computer into a power-saving mode. Sleep saves the current state of the computer to memory so tha...

79 Getting Started Turning off the computer Using the Shut Down command The Shut down command completely shuts down the computer without saving your work or the current state of the computer. This command closes all open programs, shuts down the operating system, and then turns off your computer. Us...

80 Getting Started Turning off the computer 3 Click Change advanced power settings. The Advanced settings tab of the Power Options window appears. (Sample Image) Advanced settings tab of Power Options screen 4 Click Power buttons and lid to display the actions that you can configure. 5 Select the op...

81 Getting Started Turning off the computer Once the computer is configured, you can turn it off by either pressing the power button or closing the display panel, depending on the options set. Restarting your computer To start the computer up again, press the power button until the on/off light glow...

82 Getting Started Turning off the computer To use any of these methods, you first need to enable them using the Power Options feature. 1 Click Start, Control Panel, System and Maintenance, and then Power Options. The Power Options window appears. 2 Click Change plan settings under the power plan to...

83 Getting Started Turning off the computer ❖ Power button action Set this option to Hibernate if you want the computer to go into Hibernation mode when you press the power button. ❖ Start menu power button Set this option to Hibernate if you want the computer to go into Hibernation mode when you cl...

84 Getting Started Turning off the computer 2 Click Sleep. The computer saves the status of all open programs and files to the memory, turns off the display, and enters into a low-power mode. The on/off light blinks amber indicating the computer is in Sleep mode. Configuring Sleep mode options You c...

85 Getting Started Turning off the computer 4 Click Change advanced power settings. The Advanced settings tab of the Power Options window appears. (Sample Image) Advanced settings tab of Power Options screen 5 Click Power buttons and lid to display the actions that you can configure. 6 Select Sleep ...

86 Getting Started Using your computer in tablet mode Once the computer is configured, you can place it into Sleep mode by either pressing the power button or closing the display panel, depending on the Sleep options set. Starting again from Sleep mode To start up the computer from Sleep mode, press...

87 Getting Started Customizing your computer’s settings (Sample Illustration) Using the computer in tablet mode To remove the tablet pen, press it in, and then pull it out from the side of the computer. For more information on using the computer in tablet mode, see “Using tablet mode” on page 136 . ...

88 Getting Started Caring for your computer Cleaning the computer Keep liquids, including cleaning fluid, out of the computer’s keyboard, speaker, and other openings. Never spray cleaner directly onto the computer and/or display. Never use harsh or caustic chemical products to clean the computer. To...

90 Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the internal storage drive. If the network you are usin...

92 Learning the Basics Using the keyboard Using the keyboard Your computer’s keyboard contains character keys, control keys, function keys, and special Windows ® keys, providing all the functionality of a full-size keyboard. (Sample Illustration) Keyboard Character keys Typing with the character key...

93 Learning the Basics Using the keyboard Ctrl, Fn, and Alt keys (Sample Illustration) Ctrl, Fn, and Alt keys The Ctrl , Fn , and Alt keys do different things depending on the program you are using. For more information, see your program documentation. Function keys The function keys (not to be conf...

94 Learning the Basics Using the keyboard Overlay keys The keys with gray numbers and symbols on the front of them form the numeric and cursor overlay. This overlay lets you enter numeric data or control the cursor as you would using the 10-key keypad on a desktop computer’s keyboard. (Sample Illust...

95 Learning the Basics Starting a program Starting a program The easiest way to start a program is to double-click the name of the file that contains the information you want to work on. To find the file, use the Start menu or Windows ® Explorer. If you prefer to open the program first, you have fou...

96 Learning the Basics Starting a program Starting a program from Windows ® Explorer If a program is not listed in the All Programs menu, you can start it from Windows ® Explorer. Windows ® Explorer gives you a view of your computer’s contents as a hierarchy or “tree.” You can easily see the content...

97 Learning the Basics Saving your work Starting a program using the Start Search field This example uses the Start menu’s Start Search field to start WordPad: 1 Click Start to display the Start menu. The Start Search field appears at the bottom of the Start menu. (Sample Image) Start Search field i...

98 Learning the Basics Saving your work Saving files 1 In your Windows ® -based application, click File, and then Save. 2 Click Browse folders. If you are working with a document that already has a file name, this is all you need to do. If you created a new document, your program displays a Save As ...

99 Learning the Basics Printing your work File names The Windows ® operating system supports long file names that can contain up to 260 characters and can include spaces. Some applications do not support long file names and require file names limited to no more than eight characters. You may use all...

100 Learning the Basics Backing up your work To print a file: 1 If your printer is not on, turn it on now. 2 In your Windows ® -based application, click File, and then Print. The program displays a Print dialog box. (Sample Image) Print dialog box 3 Specify the print parameters. For example, the ran...

101 Learning the Basics Using the optical drive Restoring your work To restore information from your backup media to your internal storage drive, use the Restore page in the backup program. Look in the online Help or your operating system documentation for information on restoring files. TECHNICAL N...

102 Learning the Basics Using the optical drive Optical drive components The optical drive is located on the side of the computer. Your optical drive may look like this: (Sample Illustration) Optical drive Drive in-use indicator light—Indicates when the drive is in use. Eject button—Press to release...

103 Learning the Basics Using the optical drive Setting the Optical Drive Auto Lock Right-click the Optical Drive Power icon in the Taskbar to change the Optical Drive Auto Lock settings. Enabling and Disabling Optical Drive Auto Lock: 1 Right-click on the Optical Drive Power icon on the Taskbar. 2 ...

104 Learning the Basics Using the optical drive Inserting an optical disc To insert an optical disc into the drive: 1 Make sure the computer is turned on. The drive will not open if the computer’s power is off. 2 Make sure the drive’s in-use indicator light is off. 3 Press the drive’s eject button. ...

105 Learning the Basics Using the optical drive 7 Gently press the disc onto the center spindle until it clicks into place. Handle DVDs and CDs carefully, making contact only with the center hole and edge. Do not touch the surface of the disc. Do not stack discs. If you incorrectly handle the discs,...

106 Learning the Basics Using the optical drive If your disc does not run using this method, try using an application that is associated with the media on the disc. For example, if it is a music CD, open Windows Media ® Player and use it to select and then play the CD. For other types of media, use ...

107 Learning the Basics Toshiba’s online resources 2 Pull the tray out until it is fully open, remove the disc, and place it in its protective cover. 3 Gently press the tray in to close it. Removing a disc with the computer off To remove a disc with the computer turned off: 1 Insert a slender object...

108 Chapter 3 Mobile Computing This chapter covers all aspects of using your computer while traveling. Toshiba’s energy-saver design Your computer enters a low-power suspension mode when it is not being used, thereby conserving energy and saving money in the process. It has a number of other feature...

109 Mobile Computing Running the computer on battery power Your computer contains Toshiba EasyGuard ® . The Toshiba EasyGuard* technology is made up of four foundational elements that incorporate hardware and software innovations into various Toshiba computers that address the most common security, ...

110 Mobile Computing Running the computer on battery power To ensure that the battery maintains its maximum capacity, operate the computer on battery power at least once a month. The Lithium-Ion battery has no memory effect so it is not necessary to let the battery fully discharge each time. However...

111 Mobile Computing Charging batteries Using additional batteries In addition to the main battery, you may also have an optional secondary battery (not included with your computer). If you travel and need to work for many hours without an AC power source, you may purchase a battery module for use i...

112 Mobile Computing Charging batteries The battery may not start charging immediately under the following conditions: ❖ The battery is extremely hot or cold. To ensure that the battery charges to its full capacity, wait until it reaches room temperature (50 to 80 degrees Fahrenheit, 10 to 26 degree...

113 Mobile Computing Monitoring main battery power The computer can be used while the RTC battery is being charged, although the charging status of the RTC battery cannot be monitored. Monitoring main battery power The computer’s main battery light gives you an indication of the main battery’s curre...

114 Mobile Computing Monitoring main battery power (Sample Illustration) Power and battery light locations Determining remaining battery power Wait at least 16 seconds after turning on the computer before trying to monitor the remaining battery power. The computer needs this time to check the batter...

115 Mobile Computing Monitoring main battery power TECHNICAL NOTE: The computer drains the battery faster at low temperatures. Check your remaining charge frequently if you are working in temperatures below 50 degrees Fahrenheit. The computer calculates the remaining battery charge based on your cur...

116 Mobile Computing Monitoring main battery power 3 Click Change advanced power settings. The Advanced settings tab of the Power Options window appears. (Sample Image) Advanced settings tab of Power Options screen 4 Click Battery to display the battery options. 5 Configure the alarm settings to sui...

117 Mobile Computing Monitoring main battery power power savings and peak system performance. You may also set individual power-saving options to suit your own needs. The following sections describe how to choose a Power Plan and discuss each power-saving option. Power Plans You can choose a predefi...

118 Mobile Computing Monitoring main battery power 5 Click Change Advanced Settings to access settings for battery notification levels, internal storage drive power save time, etc. You can click on the plus signs to expand each item and to see what settings are available for each item. 6 Click Save ...

119 Mobile Computing Changing the main battery Changing the main battery When your main battery has run out of power, you have two options: plug in the AC adaptor or install a charged main battery. Never short circuit the battery pack by either accidentally or intentionally bringing the battery term...

121 Mobile Computing Changing the main battery Inserting a charged battery To insert a battery: 1 Wipe the terminals of the charged battery with a clean cloth to ensure a good connection. 2 Insert the charged battery into the slot until the latch clicks. The battery pack has been designed so that yo...

122 Mobile Computing Taking care of your battery 5 Reconnect any cables that were removed in step 3 of “Removing the battery from the computer” on page 119 . 6 Restart the computer. Taking care of your battery The following sections offer tips on how to take care of your battery and prolong its life...

123 Mobile Computing Taking care of your battery Maintaining your battery Fully discharging your battery pack will allow better accuracy of the battery meter. To fully discharge your battery pack: ❖ Periodically, disconnect the computer from a power source and operate it on battery power until the b...

124 Mobile Computing Disposing of used batteries Disposing of used batteries The life of a battery pack depends on usage. When the battery pack needs replacing, the main battery light flashes amber shortly after you have fully recharged the battery. You must discard a battery if it becomes damaged. ...

125 Mobile Computing Traveling tips Toshiba is dedicated to preserving the environment by sponsoring Call2Recycle™, a program of the Rechargeable Battery Recycling Corporation. For more information and for drop-off locations, visit www.rbrc.org or call 1-800-822-8837. Notice regarding CR coin cell b...

126 Chapter 4 Exploring Your Computer’s Features In this chapter, you will explore some of the special features of your computer. Exploring the desktop The desktop is the launching pad for everything you can do in the Windows ® operating system. You use its features to start programs, find documents...

127 Exploring Your Computer’s Features Exploring the desktop Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, Taskbar, Notification Area, and background pattern. (Sample Image) Windows ® operating system desktop Icons An icon repres...

129 Exploring Your Computer’s Features Setting up for communications Setting up for communications To connect to the Internet, use an online service, or communicate across the telephone lines with another computer, you need: ❖ A browser or communications program ❖ An Internet Service Provider (ISP) ...

130 Exploring Your Computer’s Features Setting up for communications Accessing a network To access a network: ❖ At the office, connect an Ethernet cable to the Network port (RJ45) on your computer. For specific information about connecting to the network, consult your network administrator. Many hot...

132 Exploring Your Computer’s Features An overview of using the Internet An overview of using the Internet The following sections give a quick introduction to the Internet and some of its exciting features, under these headings: ❖ The Internet ❖ The World Wide Web ❖ Internet Service Providers ❖ Conn...

133 Exploring Your Computer’s Features An overview of using the Internet Connecting to the Internet To connect to the Internet, you need: ❖ A modem and telephone line, or a LAN connection ❖ A Web browser ❖ An Internet Service Provider (ISP) account Once you have established an ISP account, you can c...

134 Exploring Your Computer’s Features Exploring audio features ❖ Internet chat rooms A chat room is a Web site that offers a place where people with similar interests and ideas communicate in real-time, one-on-one or in groups, by typing messages which are instantly viewed by others on their comput...

135 Exploring Your Computer’s Features Exploring audio features 2 Click Start, All Programs, Accessories, and then Sound Recorder. (Sample Image) Sound Recorder screen 3 Click the Start Recording button. 4 Speak normally into the microphone. 5 When you have finished recording, click the Stop Recordi...

136 Exploring Your Computer’s Features Using tablet mode Using tablet mode One of your computer’s features is a convertible display that allows you to use the screen much as you would a writing tablet. Your computer came with applications already installed specifically designed to work with the tabl...

139 Exploring Your Computer’s Features Using tablet mode 2 Use the Toshiba tablet pen on the tablet as you would any pointing device. (Sample Illustration) Writing on the tablet To learn how to manually change the layout of the screen from portrait to landscape, see “TOSHIBA Rotation Utility” on pag...

140 Exploring Your Computer’s Features Web Camera Returning the computer to its original configuration When you are finished using the tablet, follow the steps below to return the computer to its original configuration: 1 Return the Toshiba tablet pen to its slot on the side of the computer. 2 Lift ...

141 Exploring Your Computer’s Features Using PC Cards Using PC Cards TECHNICAL NOTE: For PCMCIA-compatible PC Cards, check the package to make sure they conform to the PCMCIA 2.1 standard (or later). Other cards may work with your computer, but are likely to be much more difficult to set up and use....

142 Exploring Your Computer’s Features Using PC Cards Removing a PC Card Be sure to disable the PC Card prior to removing it. Otherwise, the system may be damaged. Before removing a PC Card, make sure that no applications or system services are using the card. 1 Prepare the card for removal by click...

143 Exploring Your Computer’s Features Using the Bridge Media Adapter Slot Using the Bridge Media Adapter Slot (Available on certain models) The Bridge Media Adapter slot (available on certain models) supports the use of Memory Stick ™ , Memory Stick ™ PRO, Secure Digital ™ (SD ™ ), MMC ™ (MultiMedi...

144 Exploring Your Computer’s Features Using the Ultra SlimBay II Removing memory media 1 Prepare the media for removal by clicking the Safely Remove Hardware icon in the Notification Area and then selecting the card or device you want to remove. If the system is unable to prepare the media for safe...

145 Exploring Your Computer’s Features Using the Ultra SlimBay II Removing a module from the Ultra SlimBay II Use caution when lifting or turning your computer. Failure to do so may result in damage to components, such as cables, attached to your computer, or to the computer itself. 1 Do one of the ...

146 Exploring Your Computer’s Features Using the i.LINK ® port 3 Slide the Ultra SlimBay II out of the computer. (Sample Illustration) Sliding out the module Inserting a module into the Ultra SlimBay II To install a module into the Ultra SlimBay II, simply slide the module all the way into the Ultra...

147 Exploring Your Computer’s Features Using the eSATA/USB combo port Using the eSATA/USB combo port Your computer includes an eSATA/USB combo port, which can be used with both eSATA (external Serial Advanced Technology Attachment) devices and USB devices. The eSATA interface supports fast data tran...

148 Chapter 5 Utilities Your computer includes several utilities designed to help you to reconfigure your system to best meet your individual needs. Together, these allow you to ascertain certain system details, set additional options, or change default options. These utilities are described in this...

149 Utilities TOSHIBA Assist ❖ USB Sleep and Charge Utility ❖ TOSHIBA Zooming Utility ❖ TOSHIBA Button Support ❖ CD/DVD Drive Acoustic Silencer ❖ TOSHIBA Rotation Utility ❖ Windows ® Mobility Center ❖ Tablet PC Settings ❖ Toshiba Tablet Access Code Utility ❖ TOSHIBA Accessibility ❖ Trusted Platform ...

150 Utilities TOSHIBA Assist The TOSHIBA Assist offers four categories of options: ❖ Connect ❖ Secure ❖ Protect & Fix ❖ Optimize Connect The features available in this category are: ❖ ConfigFree ® Connectivity Doctor ❖ Bluetooth ® Settings ❖ Bluetooth ® Local COM Settings (Sample Image) TOSHIBA ...

151 Utilities TOSHIBA Assist Secure The features available in this category are: ❖ Supervisor password ❖ User password ❖ TOSHIBA Security Assist (Sample Image) TOSHIBA Assist window – Secure tab

153 Utilities TOSHIBA Assist Optimize The features available in this category are: ❖ TOSHIBA SD™ Memory Card Format Utility ❖ Mouse Utility ❖ TOSHIBA Hardware Setup ❖ TOSHIBA Zooming Utility ❖ TOSHIBA Button Support ❖ CD/DVD Drive Acoustic Silencer ❖ TOSHIBA Rotation Utility ❖ TOSHIBA Accessibility ...

154 Utilities TOSHIBA Application Installer TOSHIBA Application Installer The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer. To reinstall drivers and applications: 1 Click Start, All Programs, Toshiba, Recovery, and...

155 Utilities Setting passwords Setting passwords Setting a password lets you walk away from your computer while providing additional protection for your files. When you set a password, you must enter the password before you can work on your computer again. Toshiba supports several types of password...

156 Utilities Setting passwords Using a supervisor password A supervisor password prevents other users from changing hardware configuration options. Setting a supervisor password If you choose to set a supervisor or user password, Toshiba strongly recommends that you save your password in a location...

157 Utilities Setting passwords 6 Click Set. 7 Click OK if you want to save the password to a text file on a diskette or media of your choice, or click Cancel to continue without saving the password to a text file. 8 Shut down the system to complete the process. Deleting a supervisor password To del...

158 Utilities Setting passwords To register a password for the power-on password functions: 1 Click Start, All Programs, Toshiba, Utilities, and then TOSHIBA Password Utility. The TOSHIBA Password Utility window appears. (Sample Image) TOSHIBA Password Utility window 2 Click Set. 3 Enter your passwo...

159 Utilities TOSHIBA Security Assist TOSHIBA Security Assist The TOSHIBA Security Assist Utility acts as a “command center” where you can set up various passwords or other security features, and see how these features can be used with each other to increase security even further, or to simplify the...

160 Utilities TOSHIBA Security Assist ❖ Log on Settings—Select this category to set up security options that protect individual user accounts. ❖ Password of current user: Check the status of the Windows ® password for the account to which you are currently logged on. ❖ Password of all users: Check t...

161 Utilities TOSHIBA PC Diagnostic Tool Utility TOSHIBA PC Diagnostic Tool Utility This utility can help diagnose problems with devices in your computer. Refer to the online Help documentation within the application for additional help. The TOSHIBA PC Diagnostic Tool utility may show tests for feat...

162 Utilities TOSHIBA HDD Protection Utility TOSHIBA HDD Protection Utility The TOSHIBA HDD Protection Utility controls your computer’s hard disk drive (HDD) protection feature, which parks the HDD whenever motion is detected on the computer. Using this utility, you can enable or disable hard disk d...

163 Utilities TOSHIBA SD™ Memory Card Format Utility TOSHIBA SD ™ Memory Card Format Utility This utility is used to format SD ™ cards used with the Bridge Media Adapter slot. To format an SD memory card using this utility: 1 Click Start, All Programs, Toshiba, Utilities, and then SD Memory Card For...

164 Utilities TOSHIBA SD™ Memory Boot Utility TOSHIBA SD ™ Memory Boot Utility The TOSHIBA SD ™ Memory Boot Utility allows you to create an SD card you can use to boot up your computer. This utility also allows you to easily format SD Memory Cards. Refer to the online Help documentation within the a...

165 Utilities TOSHIBA SD™ Memory Boot Utility 4 Select the drive where the SD card is located. 5 Select Read from a floppy disk. 6 Click Start. To create a bootable SD card with the Read from an image file option, you need a third-party application. Booting from a bootable SD card To boot from a boo...

166 Utilities Mouse Utility Mouse Utility The Mouse utility allows you to change your pointing device or mouse settings. To access the Mouse utility: 1 Click Start, Control Panel, and then Mouse under Hardware and Sound, or click the Mouse icon in the Optimize tab of TOSHIBA Assist . The Mouse Prope...

167 Utilities TOSHIBA Hardware Setup TOSHIBA Hardware Setup TOSHIBA Hardware Setup is the Toshiba configuration management tool available through the Windows ® operating system. To access it: ❖ Click Start, All Programs, Toshiba, Utilities, and then HWSetup, or click the TOSHIBA Hardware Setup icon ...

168 Utilities TOSHIBA Hardware Setup ❖ CPU—Allows you to enable or disable CPU frequency switching modes Dynamically Switchable—This mode is the default setting for your computer, and automatically changes the processing frequency and decreases voltage depending on the power source: ❖ AC Power—If yo...

169 Utilities USB Sleep and Charge Utility USB Sleep and Charge Utility This utility displays whether the “USB Sleep and Charge function” is enabled or disabled and shows the position of the USB port that supports the “USB Sleep and Charge function.” It also displays the remaining battery capacity. ...

171 Utilities USB Sleep and Charge Utility Enabling USB Sleep and Charge This utility can be used to enable or disable the “USB Sleep and Charge function” group. Check the check box for the group to enable the “USB Sleep and Charge function” for the USB port assigned to that group. In the default st...

172 Utilities TOSHIBA Zooming Utility TOSHIBA Zooming Utility This utility allows you to select which applications will work with the zoom in/out hot keys (see “Zoom (Display resolution)” on page 236 ). You may select all applications or any subset of the following: ❖ Microsoft ® Internet Explorer ®...

173 Utilities TOSHIBA Button Support For more information about how to use the TOSHIBA Zooming Utility, right-click the icon in the Notification Area and then click Help. TOSHIBA Button Support TOSHIBA Button Support allows you to customize the TOSHIBA Assist button. This button is located above the...

174 Utilities CD/DVD Drive Acoustic Silencer CD/DVD Drive Acoustic Silencer This utility can slow the speed of your optical drive to make it run more quietly. You can use this utility to make listening to music CDs more enjoyable. When you change the optical drive to “Silence” mode, the setting is o...

175 Utilities TOSHIBA Rotation Utility TOSHIBA Rotation Utility The TOSHIBA Rotation utility allows you to change the default setting of the display format (primary portrait) to three other display formats: ❖ Primary landscape ❖ Secondary portrait ❖ Secondary landscape To access this utility: 1 Clic...

177 Utilities Tablet PC Settings Tablet PC Settings The Tablet PC Settings utility allows you to set various options for using the tablet and pen. To access this utility: 1 Click the Tablet PC Settings icon in the Optimize tab of TOSHIBA Assist . The Tablet PC Settings screen appears. (Sample Image)...

179 Utilities Toshiba Tablet Access Code Utility Toshiba Tablet Access Code Utility This utility allows you to create and register an access code controlling who can log onto the Windows ® operating system. When creating and registering an access code, you can choose any character or symbol you want...

180 Utilities TOSHIBA Accessibility TOSHIBA Accessibility The TOSHIBA Accessibility utility allows you to use the Fn key to create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required. Using Accessibility lets you make the Fn key a s...

182 Utilities Fingerprint Authentication Utility Fingerprint Authentication Utility (Available on certain models) The fingerprint authentication utility (available on certain models) can be used to replace the keyboard-based user password authentication system when booting up. The fingerprint authen...

183 Utilities Fingerprint Authentication Utility Fingerprint Logon The fingerprint utility enables logon to your computer using fingerprints. During user enrollment, fingerprint samples are saved and associated with the user’s Windows ® user account. When the user attempts to log on again, the user’...

184 Utilities Fingerprint Authentication Utility ❖ Avoid the following finger conditions for enrollment or recognition as they may result in fingerprint enrollment errors or a drop in the fingerprint recognition success rate. ❖ Soaked or swollen finger (e.g., after taking bath) ❖ Injured finger ❖ We...

185 Utilities ConfigFree® ❖ Toshiba does not guarantee that this fingerprint recognition technology will be error-free. Toshiba does not guarantee that the fingerprint reader will recognize the enrolled user or accurately screen out unauthorized users at all times. Toshiba is not liable for any fail...

187 Utilities ConfigFree® ❖ Status of Wireless Connection switch (Sample Image) Connectivity Doctor screen Profile Settings The Profile Settings utility lets you save network settings in “profiles.” ConfigFree ® profiles are useful for easily switching network settings and devices. You can switch ne...

188 Utilities Important information for Wireless Key Logon To create a profile: 1 Click the icon in the Notification Area. 2 Move the pointer to Profile. 3 Click Open Settings. The ConfigFree Profile Settings window appears. (Sample Image) ConfigFree Profile Settings window 4 Click Add to start the ...

189 Chapter 6 If Something Goes Wrong Some problems you may encounter when using your computer are relatively easy to identify and solve. Others may require help from your network administrator or the manufacturer of the software program. This chapter aims to help you solve many problems by yourself...

190 If Something Goes Wrong Problems when you turn on the computer 2 Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. 3 Select the program you want to close, then click End Task. Closing the failed program should allow yo...

191 If Something Goes Wrong Problems when you turn on the computer If you are using an AC adaptor, verify that the computer is receiving power from the external power source by looking at the AC power light. If the indicator is glowing, the computer is connected to a live external power source. The ...

192 If Something Goes Wrong Problems when you turn on the computer If you are running on battery power, it is recommended that you do not leave the computer in Sleep mode for long periods of time. To charge the battery, leave the computer plugged into a live wall outlet for several hours. For more i...

193 If Something Goes Wrong The Windows ® operating system is not working 5 Verify that the AC adaptor is the correct unit for your computer model. The computer may not be able to start from an AC adaptor that is rated for less current (amperage) than the computer requires, even if the rated voltage...

194 If Something Goes Wrong The Windows ® operating system is not working ❖ Safe Mode with Command Prompt ❖ Enable Boot Logging ❖ Enable low-resolution video (640x480) ❖ Last Known Good Configuration (advanced) ❖ Directory Services Restore Mode ❖ Debugging Mode ❖ Disable automatic restart on system ...

195 If Something Goes Wrong Resolving a hardware conflict The Windows ® operating system can help you If the operating system has started properly but you still have a problem using your computer, the online Help can assist you in troubleshooting the problem. To access the Windows ® operating system...

196 If Something Goes Wrong Resolving a hardware conflict The device most recently connected to the system is the one most likely to be causing a conflict. Resolving conflicts There are several things you can do to resolve hardware conflicts: ❖ Get the most recent drivers from the manufacturer. ❖ Di...

197 If Something Goes Wrong Resolving a hardware conflict ❖ The Resources tab, which lists resources assigned to the monitor, optional external optical drive, optional external diskette drive, and other power-using functions. This tab does not appear if the device is not using resources. ❖ The Drive...

198 If Something Goes Wrong Resolving a hardware conflict Power and the batteries Your computer receives its power through the AC adaptor and power cord/cable or from the system batteries (battery, optional secondary battery, and real-time clock (RTC) battery). Power problems are interrelated. For e...

199 If Something Goes Wrong Resolving a hardware conflict Check the power options via your Power Plans (see “Power Plans” on page 117 ). Have you added a device, such as a PC Card or memory module, that takes its power from the battery? Is your software using the internal storage drive more? Is the ...

200 If Something Goes Wrong Resolving a hardware conflict Display problems Here are some typical display problems and their solutions: The screen is blank. Display Auto Off may have gone into effect. Press any key to activate the screen. You may have activated the instant password feature by pressin...

202 If Something Goes Wrong Resolving a hardware conflict Disk or internal storage drive problems Problems with the internal storage drive or with a diskette drive usually show up as an inability to access the drive or as sector errors. Sometimes a drive problem may cause one or more files to appear...

203 If Something Goes Wrong Resolving a hardware conflict Your data files are damaged or corrupted. Refer to your software documentation for file recovery procedures. Many software packages automatically create backup files. You may also be able to recover lost data using utility software. Consult y...

204 If Something Goes Wrong Resolving a hardware conflict You press the disc eject button, but the drive tray does not slide out. Make sure the computer is connected to a power source and turned on. The optical drive eject mechanism requires power to operate. Make sure a program is not accessing the...

205 If Something Goes Wrong Resolving a hardware conflict The computer emits a loud, high-pitched noise. This is feedback between the microphone and the speakers. It occurs in any sound system when input from a microphone is fed to the speakers and the speaker volume is too loud. Adjust the volume c...

206 If Something Goes Wrong Resolving a hardware conflict 2 Double-click the appropriate PC Card, which will be listed under one of the categories shown, for example: Disk drives, Network adapters, Other, etc. The operating system displays your PC Card’s Properties dialog box, which contains informa...

207 If Something Goes Wrong Resolving a hardware conflict A PC Card error occurs. Reinsert the card to make sure it is properly connected. If the card is attached to an external device, check that the connection is secure. Refer to the card’s documentation, which should contain a troubleshooting sec...

208 If Something Goes Wrong Resolving a hardware conflict Modem problems (Available on certain models) This section lists common modem problems. The modem will not receive or transmit properly. Make sure the cable from the modem to the telephone line is firmly connected to the computer’s modem port ...

211 If Something Goes Wrong DVD operating problems DVD operating problems If you experience a problem playing DVDs, you may be able to fix the problem yourself. For general problems playing a DVD title, try the following steps: 1 Verify that the disc is in a format that the drive supports. 2 Ensure ...

212 If Something Goes Wrong Develop good computing habits Develop good computing habits Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely...

213 If Something Goes Wrong Develop good computing habits Data and system configuration backup in the Windows ® operating system The Windows ® operating system offers some easy-to-use features for backing up your Windows ® settings and your data—documents and other important files. Take advantage of...

214 If Something Goes Wrong Develop good computing habits Then, at a later time, you can re-establish your Windows ® configuration using the saved Restore Point. To do this: 1 Click Start, All Programs, Accessories, System Tools, and then System Restore. 2 Click Next. 3 A list of previously created ...

215 If Something Goes Wrong Develop good computing habits Follow these steps to back up your computer or files to optical discs, or a storage drive: You cannot back up the computer while running on battery power. Connect the AC adaptor before continuing. 1 Prepare your backup target by connecting it...

217 If Something Goes Wrong Develop good computing habits Cannot use the “USB Sleep and Charge function.” ❖ The setting of “USB Sleep and Charge function” may be Disabled. Change the setting to Enabled. ❖ Some external devices may not be able to use the “USB Sleep and Charge function”. In this case,...

218 If Something Goes Wrong If you need further assistance If you need further assistance If you have followed the recommendations in this chapter and are still having problems, you may need additional technical assistance. This section contains the steps to take to ask for help. Before you contact ...

219 If Something Goes Wrong Other Toshiba Internet Web sites ❖ Backup copies of your Windows ® operating system and all other preloaded software on your choice of media ❖ Name and version of the program involved in the problem along with its installation media ❖ Information about what you were doing...

220 If Something Goes Wrong Toshiba’s worldwide offices For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm . ItalyCentro Direzionale ColleoniPalazzo PerseoVia Paracelso 1020041, Agrate BrianzaMilano, Italy JapanToshiba Corporation, PCO-IO1-1, Sh...

221 5.375 x 8.375 ver 2.3 Appendix A Hot Keys/TOSHIBA Cards Hot keys and TOSHIBA Cards provide a quick way to modify selected system functions and to launch applications. There are two types of TOSHIBA Cards: Hot Key Cards and Application Cards. Hot Key Cards The Hot Key Cards are used to set or mod...

222 Hot Keys/TOSHIBA Cards Hot Key Cards 5.375 x 8.375 ver 2.3 Using the Hot Key Cards The Hot Key Cards are normally hidden from view. The Cards appear when you press the Fn key. Hot keys are keys that, when pressed in combination with the Fn key, turn system functions on and off. Hot keys have a l...

223 Hot Keys/TOSHIBA Cards Application Cards 5.375 x 8.375 ver 2.3 Application Cards The Application Cards are used to launch these applications: TOSHIBA Assist For more information, refer to “TOSHIBA Assist” on page 149 . TOSHIBA HDD Protection utility For more information, refer to “TOSHIBA HDD Pr...

224 Hot Keys/TOSHIBA Cards Application Cards 5.375 x 8.375 ver 2.3 Not all functions are supported on all models. Using the Application Cards To launch an application using the Application Cards: 1 Press and hold the Fn key. The TOSHIBA Cards display at the top of the screen. (Sample Image) TOSHIBA ...

225 Hot Keys/TOSHIBA Cards Hot key functions 5.375 x 8.375 ver 2.3 2 Click the Open cards case button. 3 The Card Case displays two rows of Cards. Cards that appear solid (not transparent) in the bottom row are enabled and can be selected when the Application Cards are displayed. The top row contain...

226 Hot Keys/TOSHIBA Cards Hot key functions 5.375 x 8.375 ver 2.3 Optical disk drive or Fn + This TOSHIBA Card or hot key Powers on/Powers off the optical disk drive on your computer. When ODD is Powered on, the optical disc drive tray can be opened by selecting eject. The optical disc drive tray m...

227 Hot Keys/TOSHIBA Cards Hot key functions 5.375 x 8.375 ver 2.3 Volume Mute or Fn + This TOSHIBA Card or hot key enables/disables volume mute on your computer. When volume mute is enabled, no sound will come from the speakers or headphones. Selecting this Card or pressing the hot key displays the...

229 Hot Keys/TOSHIBA Cards Hot key functions 5.375 x 8.375 ver 2.3 Power plan or Fn + This TOSHIBA Card or hot key displays the power plans and cycles through the power plans. The properties of each power plan, and the power plans that are displayed by this function, are set in the Power Options win...

231 Hot Keys/TOSHIBA Cards Hot key functions 5.375 x 8.375 ver 2.3 Hibernation mode or Fn + This TOSHIBA Card or hot key places the computer into Hibernation mode. If Hibernation mode is disabled, this hot key will not respond. For more information on Hibernation mode, see “Using and configuring Hib...

233 Hot Keys/TOSHIBA Cards Hot key functions 5.375 x 8.375 ver 2.3 Display brightness Cycle through the display modes, then select the desired mode. Not all functions are supported on all models. Some systems also support an additional Swap Image Display mode. This mode is available only if the curr...

234 Hot Keys/TOSHIBA Cards Hot key functions 5.375 x 8.375 ver 2.3 Disabling or enabling wireless devices or Fn + This TOSHIBA Card or hot key enables/disables the optional wireless devices installed in your computer. The wireless modes are: ❖ Wi-Fi ® enabled—Enables just the Wi-Fi ® module. ❖ Bluet...

235 Hot Keys/TOSHIBA Cards Hot key functions 5.375 x 8.375 ver 2.3 Disabling or enabling the TouchPad™ or Fn + This TOSHIBA Card or hot key enables/disables the TouchPad. For more information on using the TouchPad, see “Disabling or enabling the TouchPad™” on page 72 . Selecting this Card or pressin...

237 Hot Keys/TOSHIBA Cards Hot key functions 5.375 x 8.375 ver 2.3 Keyboard hot key functions Fn + This hot key turns the cursor control overlay on and off. Fn + This hot key turns the numeric overlay on and off. Fn + This hot key turns the scroll lock feature on and off. Fn + This hot key turns the...

238 5.375 x 8.375 ver 2.3 Appendix B Power Cord/Cable Connectors Your computer ships with the correct power supply for the country of purchase. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA and Canada UL approvedCSA approved United K...

239 5.375 x 8.375 ver 2.3 Appendix C TOSHIBA PC Health Monitor The TOSHIBA PC Health Monitor software program monitors computer system functions such as power consumption, the cooling system and the 3D Accelerometer. It alerts users to specific system conditions via pop-up messages. It also tracks t...

240 TOSHIBA PC Health Monitor Enabling the TOSHIBA PC Health Monitor 5.375 x 8.375 ver 2.3 Subject to the use restrictions above, the internal storage drive data logged may be transferred to entities located outside of your country or region of residence (e.g., European Union). Those countries may o...

241 TOSHIBA PC Health Monitor Enabling the TOSHIBA PC Health Monitor 5.375 x 8.375 ver 2.3 If a TOSHIBA PC Health Monitor message is displayed A message will be displayed if any changes that may interfere with the operation of a program are detected. Follow the on-screen instructions. For example, i...

242 TOSHIBA PC Health Monitor Enabling the TOSHIBA PC Health Monitor 5.375 x 8.375 ver 2.3 Cleaning the cooling module The following information is dependent on if access to the cooling module is available. Access is available on certain models only. If you use the computer for a long period, the in...

244 Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide. AC alternating current BIOS basic input/output system bps bits per second CD compact disc CD-ROM compact disc read-only memory C...

246 Glossary SDRAM synchronous dynamic random access memory SRAM static random access memory SSD Solid State Drive SVGA super video graphics adapter TFT thin film transistor USB universal serial bus URL uniform resource locator WAN wide area network www World Wide Web Terms The following terms may a...

248 Glossary central processing unit (CPU) — The chip that functions as the “brain” of the computer. It takes information from outside sources, such as memory or keyboard input, processes the information, and sends the results to another device that uses the information. character — Any letter, numb...

Glossary 251 F file — A collection of related information, saved on disk with a unique name. A file may be a program, information used by a program, or a document. See also document. file allocation table (FAT) — The section of a storage drive that keeps track of the location of stored files. file n...

Glossary 257 T Toshiba tablet pen — The writing instrument used with the tablet. It is stored on the side of the computer. TFT display — See active-matrix display. U universal serial bus (USB) — USB is a serial bus that supports a data transfer rate of up to 480 Mbps (480 million bits per second). U...

258 Index A AC adaptor 47 AC power (DC-IN) connecting adaptor 48 AC power light 47 Alt keys 93 Application Cards 223 audio files 134 audio features 134 B backing up files 91 battery Call2Recycle™ 125 changing 119 charge indicator light 49 , 113 charge not lasting 198 charging 49 , 111 conserving pow...