Toshiba M50 - Manuals

6 5.375 x 8.375 ver 2.3 provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.) In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If y...

7 5.375 x 8.375 ver 2.3 NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to t...

8 5.375 x 8.375 ver 2.3 Wireless LAN and your Health Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by Wireless LAN devices however is far much less than the electromagnetic energy emitted by wireless devices like for example...

9 5.375 x 8.375 ver 2.3 Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. L’utilisation de ce dispositif est autorisée seulement...

11 5.375 x 8.375 ver 2.3 USA – Federal Communications Commission (FCC) This device complies with Part 15 of FCC Rules. Operation of the devices in a Wireless LAN System is subject to the following two conditions: ❖ This device may not cause harmful interference. ❖ This device must accept any interfe...

12 5.375 x 8.375 ver 2.3 Radio Frequency Interference Requirements This device is restricted to indoor use due to its operation in the 5.15 GHz to 5.25 GHz frequency range. FCC requires this product to be used indoors for frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful inter...

13 5.375 x 8.375 ver 2.3 Using this Equipment in Japan In Japan, the frequency bandwidth of 2,400 MHz to 2,483.5 MHz for second generation low-power data communication systems such as this equipment overlaps that of mobile object identification systems (premises radio station and specified low-power...

14 5.375 x 8.375 ver 2.3 Device Authorization This device obtains the Technical Regulation Conformity Certification and the Technical Conditions Compliance Approval, and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Radio Law...

20 5.375 x 8.375 ver 2.3 Bluetooth ® wireless technology Interoperability Bluetooth ® Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: ❖ Bluetooth S...

21 5.375 x 8.375 ver 2.3 Bluetooth ® wireless technology and your Health The products with Bluetooth wireless technology, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by devices with Bluetooth wireless technology however is far much less than the...

25 5.375 x 8.375 ver 2.3 The following restrictions apply: ❖ Do not disassemble or modify the device. ❖ Do not install the embedded wireless module into other device. DVD-ROM, multi-function drive safety instructions The DVD-ROM and multi-function drives employ a laser system. To ensure proper use o...

27 5.375 x 8.375 ver 2.3 Trademarks Satellite and Noteworthy are registered trademarks, and FreedomWare and SmartMedia are trademarks, of Toshiba America Information Systems, Inc. and/or Toshiba Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United State...

28 5.375 x 8.375 ver 2.3 Contents Introduction................................................................................ 36 This guide ...............................................................37Safety icons ............................................................38 Other icons used ....

29 Contents 5.375 x 8.375 ver 2.3 Using the computer for the first time ......................53 Opening the display panel .................................53Your computer’s features and specifications ....54Turning on the power .......................................54 Adding memory ..................

32 Contents 5.375 x 8.375 ver 2.3 Uploading and downloading files from the Internet ..............................................134 Exploring audio features .......................................134 Playing an audio CD ........................................134Playing CDs using Auto-Run ...........

33 Contents 5.375 x 8.375 ver 2.3 SD Memory Card Format ......................................156CD/DVD Drive Acoustic Silencer ...........................157Mouse utility ......................................................158TOSHIBA Zooming Utility ......................................159Fn-ess...

34 Contents 5.375 x 8.375 ver 2.3 Sound system problems .................................193PC Card problems ...........................................193Printer problems .............................................197Modem problems............................................198Wireless device pro...

35 Contents 5.375 x 8.375 ver 2.3 Appendix C: Using ConfigFree™ with your Toshiba Computer .............................................. 225 Getting Started ......................................................226 Starting ConfigFree .........................................226 ConfigFree Utilitie...

36 5.375 x 8.375 ver 2.3 Introduction Welcome to the world of powerful, portable, multimedia computing. With your Toshiba notebook computer, your work and entertainment can accompany you wherever you go. You will find your operating system, Microsoft ® Windows ® XP Professional or Microsoft ® Window...

37 Introduction This guide 5.375 x 8.375 ver 2.3 The product specifications and configuration information are designed for a product Series. Your particular model may not have all the features and specifications listed or illustrated. For more detailed information about the features and specificatio...

38 Introduction Safety icons 5.375 x 8.375 ver 2.3 Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the ser...

39 Introduction Other documentation 5.375 x 8.375 ver 2.3 Other icons used Additional icons highlight other helpful or educational information: TECHNICAL NOTE: This icon indicates technical information about the computer. HINT: This icon indicates helpful hints and tips. DEFINITION: This icon indica...

40 Introduction Service options 5.375 x 8.375 ver 2.3 Service options Toshiba offers a full line of optional service programs to complement its limited warranty. Toshiba's standard limited warranty, extended warranty, and service upgrade terms and conditions are available at www.warranty.toshiba.com...

41 5.375 x 8.375 ver 2.3 Chapter 1 Getting Started This chapter provides tips for working comfortably, summarizes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety...

42 Getting Started Selecting a place to work 5.375 x 8.375 ver 2.3 To keep your computer in prime operating condition, protect your work area from: ❖ Dust, moisture, and direct sunlight ❖ Equipment that generates a strong electromagnetic field, such as stereo speakers (other than speakers that are c...

45 Getting Started Setting up your computer 5.375 x 8.375 ver 2.3 special program to check for viruses. Ask your dealer to help you. Important information on your computer’s cooling fan Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer. The cooling ...

46 Getting Started Setting up your computer 5.375 x 8.375 ver 2.3 To use external power or to charge the battery you must attach the AC adapter. See “Connecting to a power source” on page 48 . To register your computer online or to sign up for an Internet account, you must either connect the built-i...

47 Getting Started Registering your computer with Toshiba 5.375 x 8.375 ver 2.3 If you are connecting your computer to a network, consult your system administrator before you choose your computer name and network settings. 6 Follow the remaining screen prompts to complete the setup process. Once you...

48 Getting Started Connecting to a power source 5.375 x 8.375 ver 2.3 After starting your computer for the first time you may want to: ❖ Add more memory (see “Adding memory” on page 55 ) ❖ Connect a mouse (see “Using a mouse” on page 69 ) ❖ Connect a full-size keyboard (see “Using an external keyboa...

52 Getting Started Charging the main battery 5.375 x 8.375 ver 2.3 If the AC power light flashes amber during charging, either the battery pack is malfunctioning, or it is not receiving correct input from the AC power supply. Disconnect the AC cable and remove the battery pack. See “Changing batteri...

53 Getting Started Using the computer for the first time 5.375 x 8.375 ver 2.3 Battery life and charge time may vary depending on the applications, power management settings, and features used. Using the computer for the first time The computer is now ready for you to turn it on and begin using it. ...

54 Getting Started Using the computer for the first time 5.375 x 8.375 ver 2.3 large number of thin-film transistors (TFT) and is manufactured using high-precision technology. Any small bright dots that may appear on your display are an intrinsic characteristic of the TFT manufacturing technology. O...

55 Getting Started Adding memory 5.375 x 8.375 ver 2.3 3 Press and hold the power button in until the power button and the on/off light on the system indicator panel glow blue—about one second. Sample turning on the power The preinstalled operating system will load automatically. When you turn on th...

56 Getting Started Adding memory 5.375 x 8.375 ver 2.3 For more information on memory options, check the accessories information that came with your computer, or visit accessories.toshiba.com . Installing a memory module Your computer has two memory module slots. One slot is under the keyboard and s...

61 Getting Started Adding memory 5.375 x 8.375 ver 2.3 You can now continue setting up the computer. When the operating system has loaded, you can verify that the computer has recognized the additional memory module. If you are adding an extra memory module after setting up the computer, verify that...

62 Getting Started Adding memory 5.375 x 8.375 ver 2.3 Sample removing the memory module 4 Replace the memory module slot cover and the screw. 5 Turn the computer over and restart it. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work. Checking total memory W...

63 Getting Started Using the TouchPad™ 5.375 x 8.375 ver 2.3 Using the TouchPad ™ The TouchPad, the small, smooth square cutout located in front of the keyboard, is sensitive to touch and enables you to move the cursor with the stroke of a finger. Simply move your finger on the TouchPad in the direc...

64 Getting Started Using the TouchPad™ 5.375 x 8.375 ver 2.3 Scrolling with the TouchPad ™ There are two active regions on the TouchPad that allow you to scroll as you would with any wheel device on a mouse or trackball. To scroll vertically, run your finger up or down along the right edge of the To...

66 Getting Started Turning off the computer 5.375 x 8.375 ver 2.3 Turning off the computer It is a good idea to turn off your computer when you are not using it for a while. If you are using the computer for the first time, leave the computer plugged into a power source (even though the computer is ...

67 Getting Started Using external display devices 5.375 x 8.375 ver 2.3 Closing the display panel When you are finished, shut the computer down and close the display panel to keep dust and dirt out of the computer. If you close the computer while it is still on, these actions will occur: ❖ If you ha...

68 Getting Started Using external display devices 5.375 x 8.375 ver 2.3 3 Turn on the external device. 4 Set the display mode by pressing Fn + F5 , or by configuring the Display Properties settings. Directing the display output when you turn on the computer Once you have connected an external displa...

69 Getting Started Using an external keyboard 5.375 x 8.375 ver 2.3 Adjusting the quality of the external display To obtain the best picture quality from your television (or other video display device), you may need to adjust the video settings. See the video device documentation for additional conf...

70 Getting Started Connecting a printer 5.375 x 8.375 ver 2.3 Connecting a printer Your printer documentation may require you to install the printer software before physically connecting the printer to your computer. If you do not install the software as instructed by the printer manufacturer, the p...

71 Getting Started Connecting a printer 5.375 x 8.375 ver 2.3 To connect a USB printer to your computer: 1 Connect the printer cable to the printer and then connect the other end to one of the computer’s USB ports. 2 Plug the printer’s power cable into a live electrical outlet. Setting up a printer ...

72 Getting Started Connecting an optional external diskette drive 5.375 x 8.375 ver 2.3 Connecting an optional external diskette drive Some operations, such as creating a password service diskette, require a diskette drive designed for use with 3.5-inch diskettes. Sample optional external USB disket...

73 Getting Started Connecting a microphone 5.375 x 8.375 ver 2.3 When the headphone is inserted, the internal speakers are automatically disabled. Before playing an audio CD, turn the volume down. Playing the compact disc at maximum volume could damage your ears. To turn the volume down, use the Vol...

74 Getting Started Using a computer lock 5.375 x 8.375 ver 2.3 Cleaning the computer Keep liquids, including cleaning fluid, out of the computer’s keyboard, speaker grille, and other openings. Never spray cleaner directly onto the computer. Never use harsh or caustic chemical products to clean the c...

76 5.375 x 8.375 ver 2.3 Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. If the network you are ...

78 Learning the Basics Using the keyboard 5.375 x 8.375 ver 2.3 Using the keyboard Your computer’s keyboard contains character keys, control keys, function keys, and special Windows ® keys, providing all the functionality of a full-size keyboard. Sample keyboard Character keys Typing with the charac...

79 Learning the Basics Using the keyboard 5.375 x 8.375 ver 2.3 Making your keyboard emulate a full-size keyboard Although your computer’s keyboard layout is compatible with a standard full-size keyboard, it has fewer keys. A standard full-size keyboard has two Enter , Ctrl , and Alt keys; editing k...

80 Learning the Basics Using the keyboard 5.375 x 8.375 ver 2.3 Function keys The function keys (not to be confused with the Fn key) are the 12 keys at the top of the keyboard. Sample function keys F1 through F12 are called function keys because they execute programmed functions when pressed. Used i...

81 Learning the Basics Using the keyboard 5.375 x 8.375 ver 2.3 Sample numeric and cursor control overlay Using the overlay to type numeric data The keys with the numbers on their right front are the numeric overlay keys. To turn the numeric overlay on, press Fn and F11 simultaneously. The numeric m...

82 Learning the Basics Starting a program 5.375 x 8.375 ver 2.3 To disable the numeric overlay, hold down the Fn key and press F11 again. The numeric mode light on the keyboard indicator panel goes out. Using the overlay for cursor control The keys with the gray arrows and symbols on their left fron...

83 Learning the Basics Starting a program 5.375 x 8.375 ver 2.3 ❖ Use Windows ® Explorer or My Computer to locate the program file ❖ Use the Run dialog box The next three sections explain how to start a program from the Start menu, Explorer and the Run dialog box. Starting a program from the Start m...

85 Learning the Basics Starting a program 5.375 x 8.375 ver 2.3 Starting a program from the Run dialog box This example uses the Run command to start WordPad: 1 Click Start , then click Run . The Run dialog box appears. Sample Run dialog box 2 In the Run dialog box: ❖ If you know the program’s locat...

86 Learning the Basics Saving your work 5.375 x 8.375 ver 2.3 Saving your work Before you turn off the computer, save your work on the hard disk drive or diskette/CD. This is one of the most important rules of computing. TECHNICAL NOTE: Save your data even when you are using the Standby command, in ...

87 Learning the Basics Saving your work 5.375 x 8.375 ver 2.3 2 Choose the drive and folder where you want your file to be stored. 3 Type a file name, then click Save . HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a di...

88 Learning the Basics Printing your work 5.375 x 8.375 ver 2.3 unlikely to recognize a strange extension and may refuse to handle your file correctly. TECHNICAL NOTE: By default, the Windows ® XP operating system does not show file extensions. For information on showing or hiding file extensions, s...

89 Learning the Basics Using the DVD-ROM or multi-function drive 5.375 x 8.375 ver 2.3 The program displays a Print dialog box. Sample Print dialog box 3 Specify the print parameters. For example, the range of pages and number of copies to print. 4 Click Print . Using the DVD-ROM or multi-function d...

90 Learning the Basics Using the DVD-ROM or multi-function drive 5.375 x 8.375 ver 2.3 TECHNICAL NOTE: Your DVD-ROM or multi-function drive is set to play region 1 (North America) DVD-ROMs. If you play a DVD disc from another region, the drive will automatically change to play in the format of the o...

91 Learning the Basics Using the DVD-ROM or multi-function drive 5.375 x 8.375 ver 2.3 Do not press the eject button or turn off the computer while the Drive in-use indicator light is glowing. Doing so could damage the disc or the drive. When the disc tray is open, be careful not to touch the lens o...

92 Learning the Basics Using the DVD-ROM or multi-function drive 5.375 x 8.375 ver 2.3 The following media control buttons are used for CD or DVD operation: ❖ The previous track button returns to the preceding track on the disc. ❖ The next track button skips to the following track on the disc. ❖ The...

94 Learning the Basics Using the DVD-ROM or multi-function drive 5.375 x 8.375 ver 2.3 7 Gently press the disc onto the center spindle until you feel it click into place. Handle DVDs and CDs carefully, making contact only with the center hole and edge. Do not touch the surface of the disc. Do not st...

95 Learning the Basics Using the DVD-ROM or multi-function drive 5.375 x 8.375 ver 2.3 Removing a disc with the computer off 1 Insert a slender object, such as a straightened paper clip, into the manual eject hole. The disc tray slides partially out of the drive (about 1 inch). Never use a pencil to...

96 Learning the Basics Using PC Cards 5.375 x 8.375 ver 2.3 Using PC Cards TECHNICAL NOTE: For PCMCIA-compatible PC Cards, check the package to make sure they conform to the PCMCIA 2.1 standard (or later). Other cards may work with your computer, but are likely to be much more difficult to set up an...

97 Learning the Basics Using your computer at the office 5.375 x 8.375 ver 2.3 Using your computer at the office By connecting an external monitor, external full-size keyboard, and a mouse, you can work with your notebook as if it were a standard office computer. An external monitor or projector con...

98 Learning the Basics Powering down the computer 5.375 x 8.375 ver 2.3 online Help or your operating system documentation for information on restoring files. TECHNICAL NOTE: When restoring files, the backup program prompts you if you try to overwrite a file that already exists on the hard disk. Mak...

99 Learning the Basics Powering down the computer 5.375 x 8.375 ver 2.3 Using Turn Off Computer or Shut Down For the Windows XP Home operating system, follow these steps to shut down the computer: 1 Click Start , select Turn off computer . The Turn off computer dialog box appears. Sample Turn off co...

100 Learning the Basics Powering down the computer 5.375 x 8.375 ver 2.3 Shutting down more quickly You can shut down the computer by pressing the power button. To use either of these methods, you first need to turn it on in Toshiba’s Power Saver utility. 1 Open the Start menu, click Control Panel ,...

101 Learning the Basics Powering down the computer 5.375 x 8.375 ver 2.3 For more information about the Power Saver utility, see “Optimize” on page 148 . Starting again after Shut down To start the computer up again, press the power button until the on/off light changes to blue. If you shut down the...

102 Learning the Basics Powering down the computer 5.375 x 8.375 ver 2.3 ❖ When starting up again, the computer returns to the mode in which you left it, including all open programs and files you were using. Configuring your computer for Hibernation 1 Open the Start menu, click Control Panel , then ...

103 Learning the Basics Powering down the computer 5.375 x 8.375 ver 2.3 Starting again from Hibernation mode To start up the computer from Hibernation mode, press the power button until the on/off light turns blue. The computer returns to the screen you were using. If you put the computer in Hibern...

104 Learning the Basics Powering down the computer 5.375 x 8.375 ver 2.3 Sample Turn off computer Windows ® dialog box If you hold down the Shift key, Stand By becomes Hibernate in the Turn off computer dialog box. To enter hibernation mode, you must hold down the Shift key while you select Hibernat...

105 Learning the Basics Toshiba’s online resources 5.375 x 8.375 ver 2.3 ❖ When I press the power button Set this option to Standby to put the computer into Standby mode when you press the power button. ❖ When I close the lid Set this option to Standby to put the computer into Standby mode when you ...

106 Chapter 3 Mobile Computing This chapter covers all aspects of using your computer while traveling. Toshiba’s energy-saver design Your computer enters a low-power standby mode when it is not being used, thereby conserving energy and saving money in the process. It has a number of other features t...

107 Mobile Computing Running the computer on battery power 5.375 x 8.375 ver 2.3 Running the computer on battery power The computer contains a removable Lithium-Ion (Li-ion) battery pack that provides power when you are away from an AC outlet. This is the main battery. You can recharge it many times...

108 Mobile Computing Charging the batteries 5.375 x 8.375 ver 2.3 For optimum DVD performance, it is recommended that you play DVDs while running the computer on AC power. In addition, your computer’s Power Saver utility can be used to select a power level setting for DVD playback. Charging the batt...

109 Mobile Computing Charging the batteries 5.375 x 8.375 ver 2.3 TECHNICAL NOTE: When your computer is using all of the power provided by the AC Adapter to run applications, features, and devices, the recharging of the battery cannot occur. Your computer’s Power Saver utility can be used to select ...

110 Mobile Computing Monitoring battery power 5.375 x 8.375 ver 2.3 The RTC battery may have become completely discharged while your computer was shipped, resulting in the following error message during startup: BAD RTC BATTERYBAD CHECKSUM (CMOS)CHECK SYSTEM The above error message may vary by compu...

112 Mobile Computing Monitoring battery power 5.375 x 8.375 ver 2.3 Displaying remaining battery power You can monitor the battery’s remaining charge. The computer calculates the remaining battery charge as it operates, based on your current rate of power use. To show remaining power: 1 Click Start ...

113 Mobile Computing Monitoring battery power 5.375 x 8.375 ver 2.3 will not power the computer for as long as a new battery, even when both are fully charged. HINT: Wait at least 16 seconds after turning on the computer before trying to monitor the remaining battery power. The computer needs this t...

114 Mobile Computing Changing batteries 5.375 x 8.375 ver 2.3 Before your computer runs out of battery power, save your data and take one of the following actions: ❖ Suspend or shut down your computer. ❖ Shut down your computer and replace the main battery with a charged one. ❖ Connect your computer...

117 Mobile Computing Taking care of your battery 5.375 x 8.375 ver 2.3 Taking care of your battery The following sections offer tips on how to take care of your battery and prolong its life. Safety precautions ❖ If the battery pack produces an odor, overheats, or changes color or shape while it is b...

118 Mobile Computing Taking care of your battery 5.375 x 8.375 ver 2.3 ❖ Do not expose the battery pack to fire. The battery pack could explode. Maximizing battery life To maximize the life of your battery pack: ❖ At least once a month, disconnect the computer from a power source and operate it on b...

119 Mobile Computing Disposing of used batteries 5.375 x 8.375 ver 2.3 ❖ If you are not going to use the computer for more than eight hours, disconnect the AC adapter. ❖ Store spare battery packs in a cool dry place out of direct sunlight. Disposing of used batteries The life of a battery pack depen...

120 Mobile Computing Conserving power 5.375 x 8.375 ver 2.3 Please be kind to our shared environment. Check with your local government authority for details regarding where to recycle old batteries or how to dispose of them properly. If you cannot find the information you need elsewhere, call Toshib...

121 Mobile Computing Conserving power 5.375 x 8.375 ver 2.3 Power profiles You can choose a predefined power profile or select your own combination of power management options. To do this: 1 Open the Start menu, click Control Panel , then Performance and Maintenance . 2 Click the Toshiba Power Saver...

122 Mobile Computing Additional options for power 5.375 x 8.375 ver 2.3 For more information on setting the battery power profile, see “Optimize” on page 148 . Additional options for power Depending on the amount of time you spend away from external power sources, the capacity of one battery pack ma...

123 Chapter 4 Exploring Your Computer’s Features In this chapter, you will explore some of the special features of your notebook computer. Exploring the desktop The desktop is the launching pad for everything you can do in the Windows ® XP operating system. You use its features to start programs, fi...

124 Exploring Your Computer’s Features Exploring the desktop 5.375 x 8.375 ver 2.3 Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, taskbar, system tray, and background pattern. Sample Windows ® XP operating system desktop Icons An ...

126 Exploring Your Computer’s Features Setting up for communications 5.375 x 8.375 ver 2.3 Taskbar Each time you open a program, a button associated with that program appears on the taskbar. With some programs, a button appears on the taskbar for each document or window you open. You can use these b...

127 Exploring Your Computer’s Features Setting up for communications 5.375 x 8.375 ver 2.3 ❖ An Internet Service Provider (ISP) or online service if you plan to use the Internet There are many other ways to connect to the Internet in addition to those discussed in this section. For troubleshooting i...

128 Exploring Your Computer’s Features Setting up for communications 5.375 x 8.375 ver 2.3 7 To verify that the modem is set up properly, select the modem you wish to check, and then click Properties to bring up the dialog box with information specific to that modem. Windows XP communicates with the...

129 Exploring Your Computer’s Features Setting up for communications 5.375 x 8.375 ver 2.3 ❖ While you are at home or traveling, you need a dial-up connection. Ask your network administrator for the telephone number of the network. Setting up the connection To set up an office connection, consult yo...

130 Exploring Your Computer’s Features Setting up for communications 5.375 x 8.375 ver 2.3 6 Select the Do not use this device (disable) option from the Device usage drop-down. 7 Click OK . Your LAN port is now disabled. To enable the Ethernet LAN port, repeat steps one through four. Select the Use ...

131 Exploring Your Computer’s Features An overview of using the Internet 5.375 x 8.375 ver 2.3 An overview of using the Internet The following sections give a quick introduction to the Internet and some of its exciting features, under these headings: ❖ The Internet ❖ The World Wide Web ❖ Internet Se...

132 Exploring Your Computer’s Features An overview of using the Internet 5.375 x 8.375 ver 2.3 Internet Service Providers To connect a computer directly to the Internet, many people and businesses use an Internet Service Provider (ISP). An ISP is a company that has the equipment and the telecommunic...

133 Exploring Your Computer’s Features An overview of using the Internet 5.375 x 8.375 ver 2.3 For more information, see “Media Control Buttons” on page 91 . If you are using your computer at the office, then you probably connect to the Internet through your company’s network. See your network admin...

134 Exploring Your Computer’s Features Exploring audio features 5.375 x 8.375 ver 2.3 which are instantly viewed by others on their computer screens. ❖ Internet news groups A news group is similar to a chat room, but instead of using a dedicated site to converse about a specialized subject with othe...

136 Exploring Your Computer’s Features Exploring audio features 5.375 x 8.375 ver 2.3 The Windows Media Player control panel works much like an ordinary compact disc player: ❖ To play the CD or to pause, click the Play/pause button. ❖ To stop the CD, click the Stop button. If your system is equipped...

137 Exploring Your Computer’s Features Exploring audio features 5.375 x 8.375 ver 2.3 Creating a CD Depending on your DVD configuration, your computer may come with a multi-function drive that allows you to: ❖ Play pre-recorded DVDs ❖ Play pre-recorded CDs ❖ Read and write data (depending on your sy...

139 Exploring Your Computer’s Features Using the i.LINK® port (optional) 5.375 x 8.375 ver 2.3 Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers. Instead of using the internal speakers, you can connect headphones or a pair of exter...

140 Exploring Your Computer’s Features Inserting and removing PC Cards 5.375 x 8.375 ver 2.3 As with USB ports, the i.LINK ® port supports both Plug-and- Play (automatic configuration) and hot swapping (the ability to connect and disconnect devices while the computer is on). Inserting and removing P...

141 Exploring Your Computer’s Features Inserting and removing PC Cards 5.375 x 8.375 ver 2.3 Sample inserting a PC Card 4 When the card is almost all the way into the slot, push firmly, but gently, to ensure a firm connection with the computer. Do not force the card into position. Removing a PC Card...

142 Exploring Your Computer’s Features Using the Bridge Media Adapter Slot (optional) 5.375 x 8.375 ver 2.3 Setting up a PC Card for your computer Some PC Cards are ready to use as soon as you install them. Others, such as hard disk cards, network cards, and SCSI adapters, may need to be set up to w...

143 Exploring Your Computer’s Features Using the Bridge Media Adapter Slot (optional) 5.375 x 8.375 ver 2.3 Sample inserting media When inserting memory media, do not touch the metal contacts. You could expose the storage area to static electricity, which can destroy data. Do not remove media while ...

144 Exploring Your Computer’s Features Connecting your modem to a telephone line 5.375 x 8.375 ver 2.3 Connecting your modem to a telephone line Your computer comes with a built-in modem that can be connected to a standard voice-grade telephone line. The modem allows you to: ❖ Access the Internet ❖ ...

146 Chapter 5 Toshiba Utilities Your computer includes several utilities designed to help you to reconfigure your system to best meet your individual needs. Together, these allow you to determine certain system details, set additional options, or change default options. This chapter describes the ut...

147 Toshiba Utilities TOSHIBA Assist 5.375 x 8.375 ver 2.3 TOSHIBA Assist The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access TOSHIBA Assist, do one of the following: ❖ Double-click the TOSHIBA Assist shortcut icon on the...

148 Toshiba Utilities TOSHIBA Assist 5.375 x 8.375 ver 2.3 ❖ Protect & Fix ❖ Optimize Connect The features available in this category are: ❖ ConfigFree™ Connectivity Doctor Secure The features available in this category are: ❖ Using a supervisor password ❖ Setting user passwords Protect & Fi...

149 Toshiba Utilities Using a supervisor password 5.375 x 8.375 ver 2.3 Using a supervisor password A supervisor password prevents other users from changing hardware configuration options. Setting a supervisor password If you choose to set a supervisor or user password, Toshiba strongly recommends t...

150 Toshiba Utilities Setting user passwords 5.375 x 8.375 ver 2.3 3 Select the Supervisor Password icon. 4 Click Registered . 5 Type your password in the Supervisor Password box. 6 Retype your password in the Supervisor Password again box. 7 Click OK . Deleting a supervisor password To cancel the p...

151 Toshiba Utilities Setting user passwords 5.375 x 8.375 ver 2.3 Hardware Setup. This is useful if more than one person uses the computer. A single user password supports the instant and power-on password functions. When setting up the various passwords, keep the following in mind: ❖ The user pass...

152 Toshiba Utilities PC Diagnostic Tool 5.375 x 8.375 ver 2.3 5 Type your password in the Password box. 6 Retype your password in the Password again box. 7 Click OK . Disabling a user password To cancel the power-on password function: 1 Click Start , All Programs , Toshiba , Utilities , then click ...

153 Toshiba Utilities TOSHIBA Power Saver 5.375 x 8.375 ver 2.3 Sample PC Diagnostic Tool screen 2 Select the devices that you would like to test by clicking the check box that appears to the left of the device. Click the + (plus) and - (minus) symbols to expand and collapse the categories. 3 Click ...

155 Toshiba Utilities TOSHIBA Power Saver 5.375 x 8.375 ver 2.3 Profiles This section lists the preset profiles along with the estimated battery life for each mode. The preset profiles are: ❖ Full Power ❖ High Power ❖ Normal ❖ DVD Playback ❖ Presentation ❖ Long Life Although you can change the prope...

156 Toshiba Utilities SD Memory Card Format 5.375 x 8.375 ver 2.3 SD Memory Card Format This utility is used to format SD cards used with the Bridge Media Adapter Slot. To access the SD Memory Card Format utility through the TOSHIBA Assist window, click Optimize on the left side of the window, then ...

157 Toshiba Utilities CD/DVD Drive Acoustic Silencer 5.375 x 8.375 ver 2.3 CD/DVD Drive Acoustic Silencer This utility can slow the speed of your optical drive to make it run more quietly. You can use this utility to make listening to Music CDs more enjoyable. When you change the CD/DVD drive to “Qu...

158 Toshiba Utilities Mouse utility 5.375 x 8.375 ver 2.3 Mouse utility The Mouse utility allows you to change your TouchPad or mouse settings. To access the Mouse utility through the TOSHIBA Assist window, click Optimize on the left side of the window, then double-click the Mouse icon. The Mouse Pr...

159 Toshiba Utilities TOSHIBA Zooming Utility 5.375 x 8.375 ver 2.3 TOSHIBA Zooming Utility This utility allows you to select which applications will work with the zoom in/out hot keys (see “Hot Keys” on page 216 ). You may select all applications or any subset of the following: ❖ Microsoft Internet...

163 Toshiba Utilities Fn-esse ® 5.375 x 8.375 ver 2.3 The program or document is now associated with the key you just selected. To open the program or document, press Fn plus the appropriate key from within any Windows program. Using the keyboard or pointing device to assign keys To assign a key to ...

164 Toshiba Utilities Fn-esse ® 5.375 x 8.375 ver 2.3 Making a popup assignment 1 Select Popup... to display the Application Explorer dialog box. 2 Select the desired folder. The left side of the Application Explorer window displays the folders in the Programs menu. The right side lists the programs...

165 Toshiba Utilities TOSHIBA HW Setup 5.375 x 8.375 ver 2.3 ❖ To change the key assignment, click Direct... or Popup... and continue as if you were creating a new assignment. ❖ To remove the key assignment, click Clear . TOSHIBA HW Setup TOSHIBA HW Setup is the Toshiba configuration management tool...

167 Toshiba Utilities TOSHIBA Hotkey utility 5.375 x 8.375 ver 2.3 ❖ USB—Allows you to enable or disable USB Legacy Emulation. ❖ LAN—Allows you to set networking functions. By changing any of the options that appear in the dialog boxes and clicking Apply , you can reconfigure that function. Any opti...

168 Toshiba Utilities TOSHIBA Touch and Launch 5.375 x 8.375 ver 2.3 TOSHIBA Touch and Launch TOSHIBA Touch and Launch is a program that adds features to the TouchPad. For example, by selecting an icon you can: ❖ Open a document ❖ Launch a program ❖ Show a list of windows and switch the active windo...

170 Toshiba Utilities TOSHIBA Touch and Launch 5.375 x 8.375 ver 2.3 to open the TOSHIBA Touch and Launch Settings window. Right-click the icon to see the following shortcuts: ❖ Settings The Settings function allows you to define the functions/features you can access in TOSHIBA Touch and Launch ❖ Di...

171 Toshiba Utilities TOSHIBA Touch and Launch 5.375 x 8.375 ver 2.3 The TouchPad settings button allows you to define how sensitive the TouchPad will be to your finger on the TouchPad before it activates the TOSHIBA Touch and Launch window. The Window settings button allows you to control the size ...

172 5.375 x 8.375 ver 2.3 Chapter 6 If Something Goes Wrong Some problems you may encounter when using your computer are relatively easy to identify and solve. Others may require help from your network administrator or the manufacturer of a software program. This chapter aims to help you solve many ...

173 If Something Goes Wrong Problems that are easy to fix 5.375 x 8.375 ver 2.3 The Windows Task Manager window appears. 2 Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. 3 Select the program you want to close, then clic...

174 If Something Goes Wrong Problems when you turn on the computer 5.375 x 8.375 ver 2.3 To record the details: 1 Click the Details button and select the text the operating system displays. The Details button displays information that the software manufacturer needs to help you solve your problem. 2...

175 If Something Goes Wrong Problems when you turn on the computer 5.375 x 8.375 ver 2.3 The computer starts but when you press a key nothing happens. Verify that the active program accepts text input. Try clicking your mouse on an area where you can type text, and try typing again. Your computer ma...

177 If Something Goes Wrong The Windows® operating system is not working 5.375 x 8.375 ver 2.3 Using Startup options to fix problems If the operating system fails to start properly, you may have to change your system’s configuration or verify the startup procedure to fix the problem. To do this, use...

178 If Something Goes Wrong The Windows® operating system is not working 5.375 x 8.375 ver 2.3 Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet. They include: modem speed, telephone line conditions, time of day (when eve...

179 If Something Goes Wrong Resolving a hardware conflict 5.375 x 8.375 ver 2.3 You can connect to Support Online by clicking Support from the menu or by going to pcsupport.toshiba.com . Resolving a hardware conflict If you receive an error message telling you there is a device driver conflict or a ...

180 If Something Goes Wrong Resolving a hardware conflict 5.375 x 8.375 ver 2.3 Resolving hardware conflicts on your own Computer components need resources to accomplish a task. A device, such as a disk drive or a modem, needs a channel to the computer’s Central Processing Unit (CPU). It also needs ...

181 If Something Goes Wrong Resolving a hardware conflict 5.375 x 8.375 ver 2.3 If you install an older (legacy) device that the operating system cannot recognize, the operating system may have difficulty assigning resources to it. As a result, a hardware conflict can occur. Resolving conflicts Ther...

182 If Something Goes Wrong Resolving a hardware conflict 5.375 x 8.375 ver 2.3 Disabling a device 1 Open the Start menu, and click Control Panel , then Performance and Maintenance . 2 Click the Administrative Tools icon. 3 Double-click Computer Management , then click Device Manager . 4 Select the ...

183 If Something Goes Wrong Resolving a hardware conflict 5.375 x 8.375 ver 2.3 The operating system displays the Device Properties dialog box, which provides an array of tabs. They may include: ❖ The General tab, which provides basic information about the device. ❖ The Resource tab, which lists res...

184 If Something Goes Wrong Resolving a hardware conflict 5.375 x 8.375 ver 2.3 5 Check for the error again. 6 If the error recurs, remove the memory module entirely and check for the error again. If removing the memory module eliminates the error, the memory module may be faulty. If the error recur...

186 If Something Goes Wrong Resolving a hardware conflict 5.375 x 8.375 ver 2.3 current on the most recent software and hardware options for your computer, and for other product information. For more information on maximizing battery power see “Changing batteries” on page 114 . Keyboard problems If,...

187 If Something Goes Wrong Resolving a hardware conflict 5.375 x 8.375 ver 2.3 Display problems Here are some typical display problems and their solutions: The screen is blank. Display Auto Off may have gone into effect. Press any key to activate the screen. You may have activated the instant passw...

188 If Something Goes Wrong Resolving a hardware conflict 5.375 x 8.375 ver 2.3 The screen does not look right. You can change the display settings by clicking a blank area of the desktop with the secondary control button, then clicking Properties. This opens the Display Properties dialog box. The A...

189 If Something Goes Wrong Resolving a hardware conflict 5.375 x 8.375 ver 2.3 The display mode is set to Simultaneous and the external display device does not work. Make sure the external monitor is capable of displaying at resolutions of 800 x 600 or higher. Devices that do not support this resol...

190 If Something Goes Wrong Resolving a hardware conflict 5.375 x 8.375 ver 2.3 Error-checking Run Error-checking, which analyzes the directories, files and File Allocation Table (FAT) on the disk and repairs any damage it finds: To run Error-checking: 1 Click Start , then click My Computer . 2 Righ...

191 If Something Goes Wrong Resolving a hardware conflict 5.375 x 8.375 ver 2.3 Your data files are damaged or corrupted. Refer to your software documentation for file recovery procedures. Many software packages automatically create backup files. You may also be able to recover lost data using utili...

192 If Something Goes Wrong Resolving a hardware conflict 5.375 x 8.375 ver 2.3 DVD-ROM or multi-function drive problems You cannot access a disc in the drive. Make sure the tray which holds the CD-ROM or DVD-ROM is closed properly. Press gently until it clicks into place. Open the tray and remove t...

193 If Something Goes Wrong Resolving a hardware conflict 5.375 x 8.375 ver 2.3 Some discs run correctly but others do not. Check the type of disc you are using. The DVD-ROM drive supports the Digital Versatile Disc (DVD) formats DVD-ROM, DVD-R (read-only), plus CD-ROM, CD-R (read-only), and CD-RW (...

194 If Something Goes Wrong Resolving a hardware conflict 5.375 x 8.375 ver 2.3 these devices to work together, several sections in this chapter may apply. Resource conflicts can cause problems when using PC Cards. See “Resolving a hardware conflict” on page 179 . Card Information Structure When you...

195 If Something Goes Wrong Resolving a hardware conflict 5.375 x 8.375 ver 2.3 Resolving PC Card problems Here are some common problems and their solutions: The slot appears to be dead. PC Cards that used to work no longer work. Check the PC Card status: 1 Click Start . 2 Click My Computer icon wit...

196 If Something Goes Wrong Resolving a hardware conflict 5.375 x 8.375 ver 2.3 Hot swapping (removing one PC Card and inserting another without turning the computer off) fails . Follow this procedure before you remove a PC Card: 1 Double-click the PC Card icon on the taskbar. 2 Click Safely remove ...

197 If Something Goes Wrong Resolving a hardware conflict 5.375 x 8.375 ver 2.3 Printer problems This section lists some of the most common printer problems: The printer will not print. Check that the printer is connected to a working power outlet, turned on and ready (on line). Check that the print...

198 If Something Goes Wrong Resolving a hardware conflict 5.375 x 8.375 ver 2.3 Modem problems This section lists common modem problems: The modem will not receive or transmit properly. Make sure the cable from the modem to the telephone line is firmly connected to the computer’s modem port and the ...

199 If Something Goes Wrong Resolving a hardware conflict 5.375 x 8.375 ver 2.3 Wireless device problems This section provides general troubleshooting tips for networking problems, specifically wireless (Wi-Fi) networking. The terms and concepts used assume a basic understanding of networks, and may...

202 If Something Goes Wrong DVD operating problems 5.375 x 8.375 ver 2.3 The Windows XP wireless management facility does not work. If you are using an external Wi-Fi adapter (a PC Card, USB adapter, or other variety), check if the adapter comes with its own management utility. If it does, the utili...

205 If Something Goes Wrong Develop good computing habits 5.375 x 8.375 ver 2.3 6 Click None . 7 Click OK . Develop good computing habits Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs bui...

206 If Something Goes Wrong Develop good computing habits 5.375 x 8.375 ver 2.3 Get familiar with all the user’s guides provided with your computer, as well as the manuals that come with the programs and devices you purchase. Your local computer store or book store sells a variety of self-help books...

208 If Something Goes Wrong Develop good computing habits 5.375 x 8.375 ver 2.3 Backing up your data to CDs with Windows XP For most of us, by far the most valuable component of our computer system is the data we have created with it, and stored on its hard disk drive. Since problems with either har...

211 If Something Goes Wrong Develop good computing habits 5.375 x 8.375 ver 2.3 General tips for installing hardware and software Here are a few tips to help insure safe and easy installation of new hardware (printers, pointing devices, external hard drives, DVD writers, scanners, etc.) and software...

212 If Something Goes Wrong If you need further assistance 5.375 x 8.375 ver 2.3 1 Back up critical data. 2 Create a Restore Point. 3 Install one item of hardware or software. 4 Restart Windows. 5 Use the new hardware or software for awhile, noting any new problems. Make sure that your critical appl...

213 If Something Goes Wrong If you need further assistance 5.375 x 8.375 ver 2.3 Detailed system specifications are available at www.ts.toshiba.com by selecting your particular product and model number, clicking GO , and then clicking the Detailed Specs link from the menu on the left, or just refer ...

214 If Something Goes Wrong Other Toshiba Internet Web sites 5.375 x 8.375 ver 2.3 Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Other Toshiba Internet Web sites Toshiba’s worldwide offices toshiba.com Worldwide Toshiba corporate site computers.toshiba.com Ma...

216 5.375 x 8.375 ver 2.3 Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the Fn key, turn system functions on and off. Hot keys have a legend on the key indicating the option or feature the key controls. Volume Mute Fn + This hot key enables/disables volume mute on your...

217 Hot Keys Password security 5.375 x 8.375 ver 2.3 Password security Without a password The Fn + F1 key combination turns off the display and activates instant security. Using the pointing device or any key will make the display’s content reappear, if no password is set for the current user. With ...

218 Hot Keys Password security 5.375 x 8.375 ver 2.3 3 If you clicked Choose a screen saver , the Screen Saver tab has already been selected. If it is not selected, click the Screen Saver tab. 4 Click the On resume, password protected check box. 5 Click OK . Maintaining security when the battery is ...

219 Hot Keys Power usage mode 5.375 x 8.375 ver 2.3 Power usage mode Standby mode Fn + This hot key displays the power usage pop-up win-dow and cycles through the battery save modes. Sample power usage modes The properties of each mode are set in the Toshiba Power Management utility. For more inform...

220 Hot Keys Hibernation mode 5.375 x 8.375 ver 2.3 Hibernation mode Fn + This hot key places the computer into Hibernation mode. ❖ If Hibernation mode is enabled (the default), a message box displays by default to confirm the computer is entering Hibernation mode. You can choose not to display this...

221 Hot Keys Display modes 5.375 x 8.375 ver 2.3 Display modes Display brightness Fn + This hot key cycles through the power-on display options. The display modes are: ❖ Built-in display panel only ❖ Built-in display panel and external monitor simultaneously ❖ External monitor only ❖ Built-in displa...

222 Hot Keys Disabling or enabling the TouchPad 5.375 x 8.375 ver 2.3 Disabling or enabling the TouchPad Zooming applications in/out Fn + This hot key enables/disables the TouchPad. For more information on using the TouchPad, see “Disabling or enabling the TouchPad” on page 64 . Sample disable and e...

223 Hot Keys Keyboard hot keys 5.375 x 8.375 ver 2.3 Keyboard hot keys Fn + This hot key informs you when the Wireless antenna on-off switch is in the off position. (No message appears when the Wi-Fi-antenna on-off switch is in the on position.) Fn + This hot key turns the cursor control overlay on ...

224 5.375 x 8.375 ver 2.3 Appendix B Power Cord/Cable Connectors The computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA and Canada UL approvedCSA approved United Kingdom BS...

225 5.375 x 8.375 ver 2.3 Appendix C Using ConfigFree™ with your Toshiba Computer ConfigFree™ is a set of utilities that makes it easy to control communication devices and network connections. ConfigFree also lets you identify communication problems and create profiles for easy switching between loc...

226 Using ConfigFree™ with your Toshiba Computer Getting Started 5.375 x 8.375 ver 2.3 ❖ Profile Settings—The Profiles utility lets you switch between network configurations. For more information, see “Profile Settings” on page 236 . ❖ ConfigFree SUMMIT—The ConfigFree SUMMIT utility is used to conne...

228 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 5.375 x 8.375 ver 2.3 Sample ConfigFree Launcher Auto-hide mode setting Sample ConfigFree Launcher coming back into view ConfigFree Utilities Connectivity Doctor The Connectivity Doctor lets you analyze your network connections an...

233 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 5.375 x 8.375 ver 2.3 Creating a new wireless connection This feature is only supported on systems running Windows XP SP2. To add a new wireless connection to an Access Point: 1 Open the Search for Wireless Devices option from Con...

234 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 5.375 x 8.375 ver 2.3 3 Enter the SSID/WEP information and connect to the device. After the Access Point is set up and added to the connection list, the system displays the Connection screen rather than the Wireless settings scree...

235 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 5.375 x 8.375 ver 2.3 Transferring files using Bluetooth ® There are several ways to use Bluetooth to send files to other devices. To select the device using the Bluetooth radar screen: ❖ Open the Bluetooth radar screen, and drag ...

236 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 5.375 x 8.375 ver 2.3 Sample selecting Send to Bluetooth Devices option 2 Choose a file recipient. 3 Click Send . During a file transfer, connecting and disconnecting to the selected device will occur automatically. Disconnecting ...

239 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 5.375 x 8.375 ver 2.3 Sample expanded Add Profile screen The online help provides real-world examples of setting up profiles for different networking environments. After you set up one or more profiles, you can check their setting...

242 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 5.375 x 8.375 ver 2.3 ❖ To share a file with all users, drag the file to the center of the SUMMIT table where users can access it as desired. If you are the Host of the summit, and drag a file to the center of the SUMMIT table, it...

244 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 5.375 x 8.375 ver 2.3 Quick Connect The Quick Connect feature includes two options: ❖ Toshiba Wireless Projector. Switches the Wireless LAN connection to connect to a Toshiba Wireless Projector ❖ Direct Link Toshiba Device . Launc...

246 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 5.375 x 8.375 ver 2.3 ❖ If you select a profile from the ConfigFree tray menu or when you disable a wireless device ❖ If you close ConfigFree Direct Link Toshiba Device When Access Point is not available, use the Direct Link Toshi...

247 Using ConfigFree™ with your Toshiba Computer Using the Automatic Switch 5.375 x 8.375 ver 2.3 Using the Automatic Switch The Automatic Switch feature allows the computer to automatically switch profiles the next time it is powered on. This feature is particularly useful if you want your computer...

248 Using ConfigFree™ with your Toshiba Computer Semi-Automatic Switch Feature 5.375 x 8.375 ver 2.3 Semi-Automatic Switch Feature The Semi-Automatic feature alerts you when the computer connects to a Service Set Identifier (SSID) stored in a profile, When the computer connects to the designated SSI...

249 5.375 x 8.375 ver 2.3 Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms These acronyms may appear in this user’s guide. AC alternating current BIOS basic input/output system bps bits per second CD compact disc CD-ROM compact disc read...

251 Glossary 5.375 x 8.375 ver 2.3 RAM random access memory RFI radio frequency interference ROM read-only memory RTC real-time clock SCSI small computer system interface DDRAM double data random access memory SRAM static random access memory SVGA super video graphics adapter TFT thin film transisto...

264 5.375 x 8.375 ver 2.3 Index Numerics 101-key keyboard 79 A AC adapter 48 AC power cord/cable connectors224accessories memory 55 adding memory 55 adjusting recording quality 138 Alt keys 79 assign keys Fn-esse 163 audio .wav files 137 audio features 134 Auto-Run 136 B backing up files 77 battery ...