Page 2 - Introduction; Industry Canada -INFORMATION
22 Introduction FCC (USA)-INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired...
Page 3 - Terms; NOTE
3 Thank you for purchasing the IK-WB81A Network Camera. Before using the camera, read this Quick Start Guide and Important Safeguards carefully to ensure correct usage. After reading this Quick Start Guide and Important Safeguards, save it for future reference. The design, specifications, software, ...
Page 4 - Table of Contents
44 Table of Contents Introduction....................................................................................................... 2 FCC (USA)-INFORMATION ....................................................................................... 2 Terms ..............................................
Page 5 - Important Safeguards
5 Important Safeguards 1. Read Instructions Read all the safety and operating instructions before operating the product. 2. Retain Instructions Retain the safety instructions and user's manual for future reference. 3. Warnings Comply with all warnings on the product and in the user's manual. 4. Foll...
Page 8 - Notes on Use and Installation
88 Notes on Use and Installation l Do not aim the camera at the sun Never aim the camera at the sun even with the camera power off. l Do not shoot intense light Intense light such as a spotlight may cause a bloom or smear. A vertical stripe may appear on the screen. However, this is not a malfunctio...
Page 9 - Setting the Network Camera Environment; Items needed for network camera monitoring; Administrator's personal computer
99 Setting the Network Camera Environment Items needed for network camera monitoring l Administrator's personal computer The personal computer that allows setting, operating, monitoring and other functions with the network camera is called the "administrator's personal computer" in this guid...
Page 10 - Package Contents
10 10 2013-02-04 IK-WB81A IK-WB81A Ver. WB81-01 l IK-WB81A l Quick Start Guide and Important Safeguards l Sun Shield Kit Wrench Tape Rubber pad l Waterproof Connector l AV Out Cable l CD-ROM l Alignment Sticker / Silica Gel l Warranty Package Contents l Wall Mount Bracket Kit Wall Mount Plate Screw ...
Page 11 - Physical Description; Front Side
11 11 Physical Description SD/SDHC Card Slot NOTE : When inserting an SD card, note the orientation of the contacts. Front Side Back Side SR-LED Lens Light Sensor MIC In (RED) General I/O Terminal Block Reset Button Status LED RJ45 Cable Focus Button Audio/Video out (Green) Back cover Rotate counter...
Page 12 - Hardware Installation; Operating environment
12 12 12 Hardware Installation Notes: l The attached screws and anchors are used to install the camera to a solid surface. (e.g. concrete) If installing to loose or thin material surfaces , use the appropriate anchors (not included) with the screws. l Install the camera tightly. Operating environmen...
Page 14 - Cabling Assembly
14 Cabling Assembly 1 2 3 4 5 6 7 8 (D) (B) (C) (A) (E) Components of the Waterproof Connector Screw Nut (C) Housing (D) Gasket (E) Seal (B) Sealing Nut (A) RJ45 Cable Dimension (unit: mm) Prepare an Ethernet cable and strip part of the sheath. Insert the housing into the screw nut. Insert the seal ...
Page 15 - Waterproof Connector
15 Waterproof Connector 1. Disassemble the components of the waterproof connector into part (A) ~ (E) as shown above.2. Open the back cover of the Network Camera.3. Remove the rubber stopper from the bottom of the Network Camera and secure the screw nut (A) tightly. 4. If you need extra power for ex...
Page 16 - Network Deployment; When using a non-PoE switch
16 Network Deployment Power over Ethernet (PoE) When using a non-PoE switch Use a PoE power injector (not supplied) to connect between the Network Camera and a non-PoE switch. When using a PoE-enabled switch The Network Camera is PoE-compliant, allowing transmission of power and data via a single LA...
Page 18 - Assigning IP Address
18 MAC:0002D1714270 S/N: A1302XXXX 0002D1714270 00-02-D1-71-42-70 169.254.0.99 IK-WR12A Installation Wizard 1. Install the "Installation Wizard" under the Software directory from the CD-ROM.2. The program will analyze your network environment. After your network is analyzed, please click on ...
Page 19 - Retrieving Images
19 Retrieving Images For more information on camera configuration, please refer to user's manual on the CD-ROM. 1. Access to the Network Camera from the network.2. Retrieve live video through Internet Explorer ® .
Page 20 - Monitoring on the television; Focus button; Adjusting the direction and Silica Gel
20 Monitoring on the television This camera is able to output an analog NTSC video signal and sound from the Audio/Video Out jack in the backside of camera.Adjustment of Viewing angle is possible using a portable monitor without using a personal computer when installing. Use the included AV Out cabl...
Page 21 - To adjust the zoom factor and focus range; Adjusting the Zoom and Focus
21 Adjusting the direction and Silica Gel Access to the Network Camera from the network, and click the configuration button on the main page. Then click the following: Audio and Video Image Zoom and Focus To adjust the zoom factor and focus range 1. Use the Zoom slide bar to find an optimal view of ...
Page 22 - Mounting the Sun shield; Completion
22 Mounting the Sun shield 1. Tighten the supplied two hex couplers by supplied hex wrench.2. Attach the supplied sun shield to the Network Camera and slide it to the desired position.3. Fix the sun shield with the supplied two screws. 1 2 3 Completion
Page 23 - Trademarks
23 Trademarks l Microsoft, Windows, Windows Vista and Intemet Explorer are trademarks or registered trademarks of Microsoft Corporation in the United States and other countries. l Intel and Intel Core are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United Stat...
Page 24 - TOSHIBA AMERICA INFORMATION SYSTEMS, INC.
TOSHIBA AMERICA INFORMATION SYSTEMS, INC. Surveillance & IP Video Products 9740 Irvine Boulevard, Irvine, CA 92618-1697 Phone Number: (877) 855-1349 625020800G