Toshiba IK-WD14A - Manuals

5 Important Safeguards 1. Read Instructions Read all the safety and operating instructions before operating the product. 2. Retain Instructions Retain the safety instructions and user's manual for future reference. 3. Warnings Comply with all warnings on the product and in the user's manual. 4. Foll...

88 Notes on Use and Installation l Do not aim the camera at the sun Never aim the camera at the sun even with the camera power off. l Do not shoot intense light Intense light such as a spotlight may cause a bloom or smear. A vertical stripe may appear on the screen. However, this is not a malfunctio...

99 Setting the Network Camera Environment Items needed for network camera monitoring l Administrator's personal computer The personal computer that allows setting, operating, monitoring and other functions with the network camera is called the "administrator's personal computer" in this guid...

10 10 IK-WD14A Ver. WD14-01 l IK-WD14A l Torx driver l AV Out cable l Warranty Card l Quick Start Guide and Important Safeguards l Screws and Anchors Contents l CD-ROM l Alignment Sticker P/N : 62XXXXXXXG

11 11 Physical Description Cover screws Knock out Internal microphone Dome Cover Lens cover Tilt adjustment screws Mounting holes

13 Hardware Installation Bottom of the Camera Dome Cover First, use the supplied driver to detach the dome cover from the camera base. Then, follow the steps below to install the camera; either to a ceiling or to a wall.

15 15 Network Deployment l When using a PoE-enabled switch The camera is PoE-compliant, allowing transmission of power and data via single LAN cable. See the following illustration to connect the camera to a PoE switch via LAN cable. POWER COLLISION LINK RECEIVE PARTITION 1 2 3 4 5 POWER COLLISION L...

17 17 17 0002D1714270 00-02-D1-71-42-70 169.254.0.99 IK-WR12A Installation Wizard 1. Install the "Installation Wizard" under the Software Utility directory from the CD- ROM. 2. The program will analyze your network environment. After your network is analyzed, please click on the "Next...

18 18 For more information on camera configuration, please refer to user's manual on the CD-ROM. 1. Access the Network Camera from the network.2. Retrieve live video through Internet Explorer ® . Retrieving Images

19 19 Adjusting the Lens Based on the live image retrieved from the camera, adjust the camera lens by performing the following: To adjust the viewing angle 1. Turn the lens module left and right. 2. Loosen the tilt adjustment screws on both side of the camera and then turn the lens module up and dow...

20 20 2 1 The supplied screwdriver is exclusively designed to match the dome screws. Do not discard the screwdriver. Dome cover 1. Attach the dome cover to camera. 2. Secure the two dome screws with a screwdriver. Make sure all parts of the camera are securely installed.

21 21 Access to the Network Camera from the network, and click the configuration button on the main page. Then click the following: Audio and Video Image Zoom and Focus To adjust the zoom factor and focus range 1. Use the Zoom slide bar to find an optimal view of the area of interest where you want ...