Toshiba IK-WB02A- Manuals

6 Introduction… ............................................................... 4Table of Contents .......................................................... 6IMPORTANT SAFEGUARDS ......................................... 7NOTES ON USE AND INSTALLATION ........................ 11Precautions for Use ...

7 IMPORTANT SAFEGUARDS 1. Read Instructions All the safety and operating instructions should be readbefore the product is operated. 2. Retain Instructions The safety instructions and instruction manual should beretained for future reference. 3. Heed Warnings All warnings on the product and in the in...

8 IMPORTANT SAFEGUARDS (Cont.) 9. Ventilation This video product should never be placed near or over aradiator or heat register. This video product should not beplaced in a built-in installation such as a bookcase or rackunless proper ventilation is provided or the manufacturer'sinstructions have be...

9 15. Servicing Do not attempt to service this video product yourself asopening or removing covers may expose you to dangerousvoltage or other hazards. Refer all servicing to qualifiedservice personnel. 16. Damage Requiring service Disconnect this video product from the power supply andrefer servici...

11 NOTES ON USE AND INSTALLATION • Do not aim the camera at the sun Do not aim the camera at the sun or point it at sun even ifyou are not shooting. • Do not shoot intense light Intense light such as a spotlight may cause a bloom orsmear. A vertical stripe may appear on the screen.However, this not ...

12 Precautions for Use About the SD Memory Card ● There is a limit to the number of rewrites that ispossible with the SD memory card. Replacing ofthe SD memory card when performing periodicmaintenance of the camera is recommended. ● The camera supports the following SD memoryc a rd s . D o n o t u s...

14 About the software This product contains a piece of software (hereafter theSoftware) licensed to TOSHIBA CORPORATION(hereafter TOSHIBA) by TOPCO CORPORATION.(hereafter TOPCO).The copyright and other intellectual property rights ofthe software are held by TOPCO or the licensor.The software is prot...

15 1/4"-20UNC 112 15 Wall 9.5mm 4 6 80 The Installation Guide is for reference only.Mounting bracket is not included. EIM-0010325 4/26/2000 Camera Installation Guide Installation Example IK-WB02A Precautions E new 2004.11.24, 15:27 15

For information on the latest products and peripheral devices, refer to the following Web page. ■ http://www.netcam.toshiba.com The above URL is subject to change without prior notice. If the URL changes, refer to the Toshiba website (http://www.cctv.toshiba.com). This User’s Guide applies to the fi...

2 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Table of Contents ● Table of Contents .................................................................................................... 2 ● Important Safety Instructions ...........................................

4 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Important Safety Instructions Be sure to read “IMPORTANT SAFEGUARDS” in theseparate “Safety Precautions.” IK-WB02-02-06 2004.10.21, 01:49 4

5 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Names and Features of Parts Image sensors are embedded.Protect the part from dust, dirt and finger marks. Image Pickup Video-Out Jack Connect a video monitor to the video output jack. Ethernet Port Connect a LAN c...

8 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Installing a Lens/Connecting to a Video Monitor Installing a Lens You can install a CS mount lens on the camera. Important ● When using a lens that weighs 400g or more including a zoom lens, make sure the lensis s...

10 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Adjusting a Lens Adjusting the Back Focus The back focus is set by default at the time of shipment. You may have to re-adjust theback focus depending on the type of your zoom lens. Loosen the focus lock screw wit...

11 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Important ● Improper setting with the iris switch and/or incorrect connection with the iris connectormay generate heat to the interior of the camera, resulting in a malfunction or failure. ● When using an auto ir...

12 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Setting Up the Network Camera Environment Requirements for Network Camera Monitoring System ° Administrator’s personal computer This manual refers to a personal computer that has been granted all privileges forco...

13 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Connecting the Camera and Personal Computer by Network ■ About the IP Address To connect to the network, the administrator needs to set the network camera IPaddress. There are two options to set the IP address. •...

14 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Connecting the Camera and Personal Computer by Network(Cont.) Structure of Connection There are following two structures for connection of the network camera: • Use a crossover cable • Connect with a hub or route...

16 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Using the Camera Search Application “Camera Finder” The camera search application “Camera Finder” is an application that searches fornetwork cameras. Install this application from the supplied mini CD-ROM. ● Sett...

17 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Click the “User” button. ● Click the “User” button to connect to the network camera from “Camera Finder.” ● The browser starts up and then the “Camera Window” screen appears. To close the window without logging i...

18 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Changing Administrator Login ID and Password Be sure to change the default login ID and password. You are able to change impor tantinformation and settings of the camera through the Administrator Login. To have h...

19 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s - Enter “root” in the Current login ID field and “ikwb” inthe Current Password field. Enter a new login ID in the New login ID field and a newpassword in the New Password field and NewPassword (Confirm) field. ● ...

20 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Setting up Access Restriction You can set up the access restriction by requiring the user to enter the user ID andpassword for the Administrator login or the registered user ID and password. Click “Configuration”...

21 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Click the “Set/Change” button. ● New user ID and password for the User login are stored in the network camera. Check “ON” in the “User authorization required”section. Click the “Set” button. ● A screen appears, a...

22 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Configuring the Network Manually You can change the settings of network connection manually.• Enter an IP address manually if you are not using, or do not want to use the DHCP server. Log in as Administrator. Cli...

23 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Select “Manually.” ● The default setting is “Automatically by DHCP.” Fill in “IP Address,” “Subnet Mask,” “Default Gateway,”“DNS1” and “DNS2.” Important ● If you do not know the subnet mask, consult the provider ...

26 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Viewing and Listening Viewing Images The images in the network camera can be displayed with the Internet browser on thepersonal computer. Search for the network camera with the “CameraFinder” → Log into the camer...

27 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s ■ Camera Window Screen Camera Control item* ( → page.28) To display the playback operating buttons, the alarm list and the normal list* ( → page. 31) To view logs* ( → page.34) To display the Configuration menu* ...

28 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Viewing and Listening (Cont.) Adjusting Images on the Camera You can set up the image quality and resolution for the images on the camera. To perform theoperation, you need to log in as Administrator. When you lo...

30 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Viewing and Listening (Cont.) Adding Images You can add and view images on the other camera. Enter the IP address of other camera in the “Watching:”field → Click “Add.” ● An image on the other camera is added on ...

31 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Using Playback Function You can use the playback function to play back recorded images of the alarm list or thenormal list in the SD memory card. To perform the operation, you need to log in asAdministrator. When...

32 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Playing Alarm Images You can play alarm images ( → page.40) which are stored on an SD memory card. The images are played at fixed intervals regardless of the recording interval. The resolution(image size) varies ...

33 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Playing Recorded Normal Images You can play recorded normal images ( → page.40) which are stored on an SD memory card. The images are played at fixed intervals regardless of the recording interval. Theresolution ...

34 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s You can view a list of logs. To perform the operation, you need to log in as Administrator.When you log in as User, the operation is disabled. Click “View log” on the left side of the Camera Windowscreen. ● A lis...

35 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Speaking You can connect a microphone to a personal computer and hear the sound through aspeaker connected to the camera. To perform the operation, you need to log in asAdministrator. When you log in as User, the...

Recording ● About Recording Images ● Recording Images on an SDMemory Card ● Recording Images on FTPServer ● Recording Images on aPersonal Computer IK-WB02-37-46 2004.10.21, 02:16 37

39 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Recording Images on an SD Memory Card You can record image data when an alarm or motion detection occurs, normal recordingimages on an SD memory card that is inserted in the network camera.To record alarm images....

40 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Configure each setting items. ■ Alarm Recording ● External Alarm ON: To record images when an external alarm occurs.OFF: Does not to record images when an external alarm occurs. ● Motion Detection ON: To record i...

41 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Recording Images on FTP Server By using FTP server, it becomes possible to manage periodic transferring and saving ofhuge amounts of recorded image data. The recordable images on an FTP server include“Periodic Re...

42 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Configure each setting items. ■ FTP General Settings You can control the settings to connect to an FTP server. ● FTP sever: Select either one of them below and enter correct information. • Server Name • IP Addres...

43 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s NOTE • When selecting “Periodic”, network camera logs in to FTP server automatically a minute before the scheduled recording starts. Whenthe scheduled recording stops, there may be some unsent image dataleft in t...

44 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Recording Images on FTP Server (Cont.) ■ Periodic FTP by Schedule You can control the settings to record images for Periodic FTP by Schedule.To run the recording, select “Periodic” in “Connection to FTP Enable” (...

45 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s 4) Enter “File Name” ● Select one of two patterns, enter characters in the part described as(keyword).File name will be shown like this: e.g. Pattern1: (keyword) yy mm dd HH MM SS 00.JPG Pattern2: LV (keyword) yy...

46 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s ■ FTP by External Alarm/Motion Detection You can control the settings to record images for FTP by Exter nal Alarm/MotionDetection. ● To configure the external alarm/motion detection, select “ON” in “External Alar...

48 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s ■ FTP by EXT Control (Recording Data by EXT Control) You can control the settings to record images for FTP by EXT Control. ● Select “EXT” in “External Alarm Detect” of the alarm settings ( ➝ page. 64). ● To run t...

49 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s ■ Image Accumulation to SD Memory Card Configures whether or not to save image data on SD memory card when the cameracan not record image(s) on FTP server due to network problems. The accumulateddata is transferr...

50 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s File Transfer Order ■ Periodic FTP by Schedule Basically, files are transferred in recorded order. However, the camera may take thefollowing processes depending on networking conditions. 1) When networking condit...

51 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Recording Images on a Personal Computer You can record images in the JPEG file or AVI file format on a personal computer. Image Recording Feature Right-click on the image of the “Camera Window”screen. ● The opera...

52 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s When saving images as an AVI file Specify the recording limit. Mark one of the items and enter the value in its field. Enter the recording interval. Click the “Save As” button → Select the destination directory. ...

53 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Recording Current Image Data as Still Image Right-click on the image of the “Camera Window”screen. ● The operating menu appears on the screen. Click “Save Current Picture As.” ● A screen appears, asking you to sp...

Setting up ● How to Set up ● System Settings ● User Settings ● Admin Settings ● Alarm Settings ● Network Settings ● Mail Settings ● FTP Client Settings ● FTP Server Settings ● DDNS Settings ● Recording Settings ● Audio Settings ● Updating the Firmware ● Saving the Settings on a Personal Computer IK-...

56 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s How to Set up Only the Administrator is authorized to set up configurations for the network camera. You can select the setup items by clicking “Configuration” on the “Camera Window” screen. General Configuration ...

57 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s System Settings Click “Configuration” on the left side of the “CameraWindow” screen. • The Configuration menu appears on the left side of the screen. Click “System” on the left side of the screen. • The System se...

59 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s ■ Rebooting the network camera You can restart the network camera.1) Click “Reboot IP Camera.” A confirmation message appears, asking whether or not the camera should berebooted. 2) Click “OK.” ■ Updating the Fir...

60 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Click “Configuration” on the left side of the “CameraWindow” screen. • The Configuration menu appears on the left side of the screen. Click “User” on the left side of the screen. • The User setting screen appears...

62 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Admin Settings Click “Configuration” on the left side of the “CameraWindow” screen. • The Configuration menu appears on the left side of the screen. Click “Admin” on the left side of the screen. • The Admin setti...

64 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Click “Configuration” on the left side of the “CameraWindow” screen. • The Configuration menu appears on the left side of the screen. Click “Alarm” on the left side of the screen. • The Alarm setting screen appea...

66 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Click “Configuration” on the left side of the “CameraWindow” screen. • The Configuration menu appears on the left side of the screen. Click “Network” on the left side of the screen. • The Network setting screen a...

68 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Click “Configuration” on the left side of the “CameraWindow” screen. • The Configuration menu appears on the left side of the screen. Click “Mail” on the left side of the screen. • The Mail setting screen appears...

70 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Click “Configuration” on the left side of the “CameraWindow” screen. • The Configuration menu appears on the left side of the screen. Click “FTP client” on the left side of the screen. • The FTP client setting sc...

71 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Click “Configuration” on the left side of the “CameraWindow” screen. • The Configuration menu appears on the left side of the screen. Click “FTP server” on the left side of the screen. • The FTP server setting sc...

72 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Click “Configuration” on the left side of the “CameraWindow” screen. • The Configuration menu appears on the left side of the screen. Click “DDNS” on the left side of the screen. • The DDNS setting screen appears...

74 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Click “Sound” on the left side of the “Camera Window”screen. • The Audio setting screen appears on the right side of the display. • When setting to “OFF” in “Sound” of the Admin Settings, “Sound” is not displayed...

75 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Click “Configuration” on the left side of the “CameraWindow” screen. • The Configuration menu appears on the left side of the screen. Click “System” on the left side of the screen. • The System setting screen app...

76 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Click “Firmware update.” • The Firmware update screen appears on the right side of the display. Click the “Browse” button. • A screen appears, allowing you to select a file. Select the file of the latest firmware...

77 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Click “Configuration” on the left side of the “CameraWindow” screen. • The Configuration menu appears on the left side of the screen. Click “System” on the left side of the screen. • The System setting screen app...

78 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Importing the Settings Saved on a Personal Computer Click “Import new configurations” on the Systemsetting screen. • The Import new configuration screen appears on the right side of the display. Click the “Browse...

Others ● Alarm Terminals ● Index (Glossary) ● Display of Logs ● Before Calling ServicePersonnel... ● Specifications ● Appearance Diagram IK-WB02-79-85 2004.10.21, 02:26 79

86 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Display of Logs Logs are saved in an SD memory card. When the SD memory card is not set, no logs areaccumulated.Up to about 4,000 logs can be accumulated on an SD memory card. Display Description System Boot Chan...

95 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Specifications IK-WB02A AC 24V ± 10% 60Hz/DC 12V ± 10%/ PoE Approx. 5.5w with Al lens 1/3 inch CCD image area sensor 4.96mm (0.195inch) horizontal X 6.0mm (0.236inch) vertical (1/3inch type) 771 horizontal x 492 ...

96 Installation/Set up Vie wing • Listening and Operation Recor ding Setting up Other s Appearance Diagram POWER SELECT AC 24V/ DC 12 V PoE Unit: mm IK-WB02-95- 2004.10.21, 02:38 96

Three EMI cores are attached to this camera.These parts are used like the following drawing.If not used, an unnecessary radio wave may be emitted. How to use "EMI core" このカメラには3個のEMIコアが同梱されています。これらのコアは下図のようにしてお使いください。使用されないと不要な電波が発生し、システムに障害が出る場合があります。 EMIコアの使いかた Video cable: 1 turn Audio ca...

POWER SELECT AC 24V/ DC 12 V PoE ■ When power is supplied from a PoE compatible hub, etc. About the POWER SELECT Switch Power will not be supplied if the power source type and POWER SELECT switch do not match. PoE (IEEE802.3af) compatible hub, etc. LAN cable Switch the POWER SELECT switch to PoE. PO...