Page 2 - User’s Guide; For European models only:; peripheral equipment.
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide i FCC/IC NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference whe...
Page 3 - Trademarks; Copyright © TOSHIBA TEC Corp. 2002 All Rights Reserved.
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide ii Trademarks EFI, Fiery, the Fiery logo, Fiery Driven and RIP-While-Print are registered trademarks of Electronics For Imaging, Inc. in the U.S. Patent and Trademark Office and/or certain other foreign jurisdictions. The Electronics For Imag...
Page 4 - SOFTWARE LICENSE AGREEMENT; Coded Font Programs.
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide iii SOFTWARE LICENSE AGREEMENT YOU SHOULD CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS BEFORE USING THIS SOFTWARE. IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT, DO NOT USE THE SOFTWARE. INSTALLING OR USING THE SOFTWA...
Page 5 - PROPRIETARY RIGHTS
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide iv PROPRIETARY RIGHTS You acknowledge that the Software, Coded Font Programs, Typefaces, and Trademarks are proprietary to Electronics For Imaging and its suppliers and that title and other intellectual property rights therein remain with Ele...
Page 6 - LIMITATION OF LIABILITY
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide v LIMITATION OF LIABILITY IN NO EVENT WILL ELECTRONICS FOR IMAGING OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES, INCLUDING LOSS OF DATA, LOST PROFITS, COST OF COVER OR OTHER SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES ARISING FROM TH...
Page 7 - setup; GUI M
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide vi TABLE OF CONTENTS Introduction .................................................................................................................................... 1 G UIDELINES ................................................................
Page 8 - CORE D
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide vii PPD Options ......................................................................................................................................... 35 P RINTING ..............................................................................
Page 9 - Introduction; Guidelines; bold
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 1 Introduction This manual describes how to install the user software for the TOSHIBA GA-1040 Network Printer Board, set up printing, and manage print jobs from a Unix client. For information about setting up network servers and clients to us...
Page 10 - System Requirements; UNIX/LINUX System System Tools; Motif Support; rcutil
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 2 Pre-installation System Requirements English versions of the following operating systems are supported for use with the GA-1040 Printer Driver: • Sun Solaris 2.4 or later (SPARCstation) • Sun Solaris 8 (Intel) • HP-UX 10.0 or later • IBM AI...
Page 11 - install; Obtaining the Installation Package; tar; Installed Files; Platform
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 3 Motif 1.2 System Requirement Details HP-UX Motif 1.2 libraries: libXm Needed to be installed in target system. Solaris Motif 1.2 libraries: libXm Needed to be installed in target system. AIX Motif 1.2 libraries: libXm Needed to be installed...
Page 12 - the
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 4 The driver cannot be installed on systems that have write-protection turned on for the /usr/local folder. The driver installation destination directory is fixed for each platform to the location specified in the table above. This is current...
Page 13 - lp
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 5 Linux Additional Files Description shfilter.scr Middle script filter for Linux server installations used to parse parameters received from lp and passed to the CORE filter. The Linux installer assumes that the Korn shell exists in /bin. If ...
Page 14 - Installation Program; Pre-Installation Procedures; DISPLAY; Installation Script
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 6 setup Installation Program Depending on your network environment, distribution of clients, and planned print configuration, you may run only server installations of the Unix driver, or both client and server installations. Pre-Installation ...
Page 15 - Syntax
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 7 system errors when launching the setup installation program directly on systems without Motif support. The install installation script will show an error message if it cannot find the Motif library in the system, except for Linux, where the...
Page 17 - runs the; installation program in un-install and text mode to un-; all; removed from the; Setup; resource file, this will use the 8-bit color; Notes on X_QueryColors
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 9 ./install –u t:all g:no runs the setup installation program in un-install and text mode to un- install all print queues. ./install pshakuba s:hakuba p:direct cdepth:8 Runs in GUI mode and initialize the print queue, destination printer and ...
Page 18 - GUI Mode; Install button; selected; Uninstall All button; Exit button; resource file
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 10 GUI Mode The following buttons allows user to interactively control the installation and un-installation process. • Install button This button starts the installation process. This button is disabled until all required fields are filled in...
Page 19 - Introduction Tab; Introduction tab
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 11 Introduction Tab The Introduction tab shows information about the setup installation program. General Tab • Print Queue o This is the name of the print queue to be created and associated with the Unix filter. • Install Type o The print que...
Page 20 - Advanced Tab; Advanced tab
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 12 • Printer Port/Remote Queue o On server install type, Printer Port is the Fiery printer port on the remote printer device. o On client install type, Remote Queue is the server-type print queue on the UNIX/Linux Network Server . o This is p...
Page 21 - Printer List
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 13 system requires the scripts to be in a different location, specify the new location in this field. • Middle script/Client script o This is for Linux installations only: This is the name to give the actual script installed on the system. By...
Page 22 - Status Dialog; Text Mode; Installation mode; Figure 5; Status dialog; Figure 6; Help dialog
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 14 Status Dialog The Status dialog shows messages describing the progress of the installation process. The Done button closes the dialog after a successful installation or after an error occurs during installation. It is disabled during the i...
Page 23 - Uninstallation mode; Post Installation Procedures; Platform Specific Checks
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 15 The program will also prompt for other settings such as manpage path, middle script name, temporary files location, or UI Link path. Follow screen prompts to specify non-default settings. Whenever a yes/no type question is asked, the upper...
Page 25 - rcutil Property Tabs; The GA-1040 Printer Driver; configuration program consists of four property; Paper Size; Custom Size; is one of the choices.; Keyword Name; pagesize Paper; Option Name; Setup Tab
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 17 rcutil Property Tabs The GA-1040 Printer Driver rcutil configuration program consists of four property tabs: Setup, Personality, Options, and About tabs. Setup Tab This tab contains the standard printer settings: paper size, paper source, ...
Page 27 - Orientation; orientation Orientation; Figure 8; Landscape; Figure 9; Portrait
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 19 Orientation The user can select Portrait, Landscape, Reverse Portrait, or Reverse Landscape. Keyword Name Translation/Display Text orientation Orientation Option Name Translation/Display Text portrait Portrait landscape Landscape reversepo...
Page 28 - duplex Duplex; Edge; Long Edge Binding; The pages are bound on the long side, regardless of orientation.; Short Edge Binding; The pages are bound on the short side, regardless of orientation.
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 20 Duplex The user can select the output job to be Single (single-sided), Long (two-sided with long edge) binding, or Short (two-sided with short edge binding). Keyword Name Translation/Display Text duplex Duplex Option Name Translation/Displ...
Page 29 - Number of Copies; copies; Additional PPD-specified Property Tabs; The; Personality; and; Options; tabs; Personality Tab; Personality tab
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 21 Number of Copies The user can specify 1-999 copies. Keyword Name Translation/Display Text copies Number of Copies Type Range Integer 1 – 999 Additional PPD-specified Property Tabs The Personality and Options tabs are examples of PPD-specif...
Page 30 - Hole Punch; setting is the selection for punch holes, whether turned off, or; Smoothing
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 22 Finishing The user can specify to turn on collation and stapling. Keyword Name Translation/Display Text finishing Finishing Option Name Translation/Display Text none None sort Sort group Group alternation Alternation stapleul Upper Left St...
Page 31 - Options Tab; Pedestal Option; Options tab
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 23 Options Tab Pedestal Option This setting provides the choices for the installed pedestal devices. Keyword Name Translation/Display Text pedestaloption Pedestal Option Option Name Translation/Display Text none Not Installed pedestal1 Pedest...
Page 32 - About; Main Controls; About Tab
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 24 Punch Unit This setting provides the choices for the installed punch unit devices. Keyword Name Translation/Display Text punchunit Punch Unit Option Name Translation/Display Text none Not Installed 2hole 2 Hole Punch Unit 3hole 2/3 Hole Pu...
Page 33 - Help Dialog
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 25 Help Dialog The Help dialog provides a description of the GA-1040 Printer Driver, including the features enabled in the driver. The F533Readme.txt file that is shipped with the driver contains the text displayed in the Help dialog. The sai...
Page 34 - Localization; Rcutil; resource file. This file is found in
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 26 Localization The buttons and settings fields in the user interface can be renamed by editing the Rcutil resource file. This file is found in /usr/lib/X11/app-defaults , except in Solaris where it is found in /usr/openwin/lib/X11/app-defaul...
Page 35 - Using rcutil; Running; UNIX/LINUX System Driver Files Location; Settings file; keyword
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 27 Using rcutil Running rcutil To launch the GUI setup program, run /opt/rcutil on the command line. $ /opt/rcutil <Return> Note : • The rcutil configuration program uses the same PPD configuration file as the CORE UNIX filter. It parse...
Page 36 - User Home Directory Access Restrictions
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 28 # System-Default Profile for rcutil##-Number of characters per line is expected to be less than 256.#-variables have to be in uppercase, values to be lowercase.#PageSize = LedgerDestination = InnerOrientation = Reverse PortraitDuplex = Lon...
Page 37 - required to be turned on. This would allow the; system account to have access to
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 29 required to be turned on. This would allow the lp system account to have access to the settings file stored in the user’s home directory. If you’re having a problem printing in your system, check if the user’s home directory satisfies the ...
Page 38 - Constraints; Save settings; button saves the changed (non-default) settings to the settings
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 30 Constraints As settings are changed, the program checks if the selection violates some constraints specified in the PPD configuration file. The constraints are rules that tell when an option is valid when combined with other options. For e...
Page 39 - Illustrated Process and Data Flow; GUI Process
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 31 Illustrated Process and Data Flow GUI Process rcutil configuration program • When Save settings button is clicked on, the non-default settings are saved back to the settings file. .f533rc is a custom default setting for each user. • The Ex...
Page 40 - Unix CORE Driver Process; Unix CORE driver
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 32 Unix CORE Driver Process PPD .f533rc Command line parameters Apply features and generate output file. Parse command line Read settings from .f533rc Read defaults from PPD. Unix CORE driver is invoked by lp command.
Page 41 - Printer Driver Details; Standard Options; Feature
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 33 Printer Driver Details This section describes in detail the features available in the GA-1040 Printer Driver. Standard Options Feature Keyword:Option Non-native form Description Copies copies:# Range 1 – 999 copies# where # is in the range...
Page 43 - PPD Options; Printing
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 35 PPD Options Feature Keyword:Option Non-native form Description Rotate 180 Degrees userrotate180:<param> 0 1 UserRotate1800 UserRotate1801 Sets User Rotate 180 Degrees On or Off. Finishing finishing:<param> none sort group alter...
Page 44 - native; Methods of Printing; Through rcutil; Printing from Unix applications; Netscape Navigator
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 36 The option can be in the non-native or native format. Native format means keyword:option while non-native means keywordoption . Some options can be specified as just option , for example, A4 or duplex . Methods of Printing Through rcutil •...
Page 45 - Print to File; Printing in Netscape Navigator; Then click on; button to start printing the file through; pshakuba; then click the; Print; to send the printed file
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 37 Figure 25 Print to File Printing in Netscape Navigator Specify in the print command the print queue and the options that will be applied to the printout. Then click on Print button to start printing the file through pshakuba print queue. I...
Page 46 - If printing to file, as in the following figure:; File Name; field, then click the; to send the printed file to the print queue, as
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 38 Printing in Adobe Acrobat Reader Specify in the print command the print queue and the options that will be applied to the printout. If printing to file, as in the following figure: specify the destination file in the File Name field, then ...
Page 47 - Messages; Installation Phase; These messages are shown during installation phase.; Error Messages; Message
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 39 Messages The following tables show the messages that the installation program and the rcutil configuration program may generate, with the possible causes why the messages are shown. Installation Phase These messages are shown during instal...
Page 48 - Status and Prompt Messages
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 40 Message Possible Cause You must be ‘root’ (superuser) to install. “superuser” access is needed to be able to install the printer driver. ERROR: The default folder for manpage of <manpage> does not exist. The manpage cannot be install...
Page 51 - rcutil Configuration Program; When any setting is saved
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 43 Message Description configuration program manpage. To see supported CORE options, enter: man EFTPS Tells users on how to view the CORE filter manpage. To see GUI setup program manpage, enter: man rcutil Tells users on how to view the confi...
Page 52 - CORE Driver; Error type; Unrecognized non-native parameter; configuration program, on the Help; Banner page template
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver User’s Guide 44 CORE Driver A banner page is automatically printed if there’s an error in the print job. The banner page contains the following header information. Error type Banner Page error message Unrecognized non-native parameter Cannot recognize opt...
Toshiba 26C100U
User Manual
Toshiba 55SL412U
User Manual
Toshiba 50L5200U
User Manual
Toshiba 24V4210U
User Manual
Toshiba 40L3400U
User Manual
Toshiba 50L1350U
User Manual
Toshiba 24SLV411U
User Manual
Toshiba 50L2400U
User Manual
Toshiba 58L7350U
User Manual
Toshiba 50L1400U
User Manual