Toshiba e-STUDIO25 - Manuals

1 2 3 4 5 6 7 9 10 11 12 8 8 4. PRECAUTIONS 1. Installation The e-STUDIO should be placed near an outlet that is easily accessible. 1 The e-STUDIO16/20/25 should be installed by an authorized TOSHIBA service technician. Note The packing material should be disposed of properly. 3 After a suitable pla...

9 1 2 3 4 5 6 7 9 10 11 12 8 2. General Precautions 1 Handle and use the machine gently and carefully. • Do not place anything on the paper cassettes or original feed tray. • Never allow the power cable to be trampled on or pinched between hard objects, otherwise an accident or electrical trouble mi...

1-1 1 2 3 4 5 6 7 9 10 11 12 8 1. BEFORE MAKING COPIES 1. DESCRIPTION OF THE OPTIONAL EQUIPMENT ....................................................... 1-2 2. DESCRIPTION OF THE DIGITAL COPIER .................................................................... 1-3 Main Components .....................

1 2 3 4 5 6 7 9 10 11 12 8 1-2 BEFORE MAKING COPIES 1. DESCRIPTION OF THE OPTIONAL EQUIPMENT Automatic document feeder (MR-2012) Reversing automatic document feeder (MR-3011) Stapler (KK-1600) Job separator (MJ-5001) Offset tray (MJ-5002) Automatic duplexing unit (MD-0101) Stack feed bypass (MY-1016...

1-3 1 2 3 4 5 6 7 9 10 11 12 8 2. DESCRIPTION OF THE DIGITAL COPIER Main Components Original cover Original scale Copy receiving tray Power switch Original glass Control panel Front cover Cassette Manual pocket Side cover Brightness control* * Brightness control Used to adjust the brightness of the ...

1 2 3 4 5 6 7 9 10 11 12 8 1-4 BEFORE MAKING COPIES Control Panel IMAGE MODE You can switch between the image modes (Text, Text/Photo and Photo) for copying. The lamp of the currentlyselected image mode illuminates. Message Display Panel Displays the copier conditions, operating procedures, and vari...

1-5 1 2 3 4 5 6 7 9 10 11 12 8 Automatic Function Clear Mode Even if you do not press the key, the automatic function clear modewill clear all settings to defaults andthe basic screen will be displayed, 45seconds after copying is finished orafter the last key is pressed. While thedepartment manageme...

1 2 3 4 5 6 7 9 10 11 12 8 1-6 BEFORE MAKING COPIES When the power is turned on, the following basic screen is shown on the Message Display Panel. (Whenthe copier is controlled using the department code, a different screen is display. Page 1-13) The Message Display Panel indicates the copier’s statu...

1-7 1 2 3 4 5 6 7 9 10 11 12 8 3. PAPER Acceptable Paper Types and Sizes / Handling and Storing Paper Acceptable Paper Types and Sizes Remarks Plain paper with holes for filing cannot be used. Plain paper with holes for filing cannot be used. (for e-STUDIO20/25 only) Plain paper with holes for filin...

1 2 3 4 5 6 7 9 10 11 12 8 1-8 BEFORE MAKING COPIES Changing the Paper Size of the Cassette The paper size of the copier’s cassettes can be changed to appropriate paper sizes using the followingprocedure. 3 Push the right (unlock) side of the size selection lever to unlock it. 4 While pushing the si...

1-9 1 2 3 4 5 6 7 9 10 11 12 8 5 Push the left (lock) side to lock the size selection lever. Tip Changing the paper size of the cassette alone does not changethe cassette size indication on the display. To change the cassettesize, perform cassette size setting on the Message Display Panel. Page 1-11...

1 2 3 4 5 6 7 9 10 11 12 8 1-10 BEFORE MAKING COPIES 3. PAPER (Cont.) Turning ON the Power Switch / Auto Job Start Turning On the Power Switch 2 The “Ready” message appears. • This message indicates that the copier is ready for operation. Auto Job Start READY 1 PAPER :APS :AUTO FINISHING :NONSORT ZO...

1-11 1 2 3 4 5 6 7 9 10 11 12 8 Cassette Size Setting PROGRAM 01.DEFAULT SETTINGS 02.LISTS 03.INITIAL SETUP 1 Press the key to enter the program menu. 2 Select "01.DEFAULT SETTINGS" and press the key. Enter the paper size loaded in each paper cassette in the copier. When the size of the pape...

1 2 3 4 5 6 7 9 10 11 12 8 1-12 BEFORE MAKING COPIES 7 Repeat steps 4 to 6 to specify the paper size for other paper cassettes, as necessary. 8 Press the key to return to the initial screen for copying. 3. PAPER (Cont.)

2-1 1 2 3 4 5 6 7 9 10 11 12 8 2. HOW TO MAKE COPIES 1. GENERAL COPYING PROCEDURE ............................................................................. 2-2 2. SETTING ORIGINALS ................................................................................................... 2-4 Originals ....

1 2 3 4 5 6 7 9 10 11 12 8 2-2 HOW TO MAKE COPIES 1. GENERAL COPYING PROCEDURE When originals are set and the key is pressed with all settings unchanged, copies are made using the initial (default) settings (*1). By selecting various copy modes, you can alter the number and type ofcopies to be made....

1 2 3 4 5 6 7 9 10 11 12 8 2-4 HOW TO MAKE COPIES 2. SETTING ORIGINALS Originals The following specifications apply to originals that can be used with this copier: Remarks Do not place any heavy object (4 kg or over) on the glass. Some of the originals on the left may not be used depending on type o...

2-5 1 2 3 4 5 6 7 9 10 11 12 8 Placing the Original on the Glass Sheet Originals 1 Raise the original cover or the automatic document feeder (optional) and place the original on the glass facing down. 3 Lower the original cover or the automatic document feeder (optional) slowly. 2 Align the original...

1 2 3 4 5 6 7 9 10 11 12 8 2-6 HOW TO MAKE COPIES Using the Automatic Document Feeder (optional) or the Reversing Automatic Document Feeder (option) 2. SETTING ORIGINALS (Cont.) 1 After aligning the edges of the originals well, place them on the original feed tray facing up and align the slides to t...

1 2 3 4 5 6 7 9 10 11 12 8 2-8 HOW TO MAKE COPIES 3. INTERRUPT COPYING The interrupt copy is a convenient feature that allows the user to pause a job that is currently in progress. 1 Press the key. • This message appears: Job interrupted • The key illuminates during the INTERRUPT copying. Note One i...

1 2 3 4 5 6 7 9 10 11 12 8 3-4 BASIC MENU 1. PAPER SELECTION (Cont.) Manual Paper Selection Highly transparent originals such as OHP films and tracing paper, very dark originals, originals with darkborders, or non-regular sized originals such as newspaper and magazines, may be incapable of automatic...

3-5 1 2 3 4 5 6 7 9 10 11 12 8 Bypass Copying Bypass copying is convenient in the following instances:• When the size of the paper you require is not installed in the copier’s paper cassettes.• When you want to use a special type of paper such as OHP film.* The optional stack feed bypass is required...

1 2 3 4 5 6 7 9 10 11 12 8 3-6 BASIC MENU 1. PAPER SELECTION (Cont.) 5 Enter the desired copy quantity using the numeric keys. 6 Press the key. Tip • If the paper misfeeds in the bypass and the Paper Jam Lamp flashes, remove the sheets from the bypass and replacethem. Page 7-14. • If the size of pap...

3-7 1 2 3 4 5 6 7 9 10 11 12 8 Bypass Copying by Specifying the Copy Size By specifying the copy size in bypass copying, you can select the following copying modes: • Duplex copying • Dual-page copying • Sort copying • Offset • Magazine sort • 2-in-1/4-in-1 • Alternation 1 Place sheets of copy paper...

1 2 3 4 5 6 7 9 10 11 12 8 3-8 BASIC MENU 2. REDUCTION AND ENLARGEMENT COPYING There are four methods available for enlargement and reduction copying.• Using Automatic Magnification Selection (AMS): After selecting the AMS mode and copy size, the copier automatically detects the size of the original...

3-13 1 2 3 4 5 6 7 9 10 11 12 8 3. COPYING WITH COPY DENSITY SELECTION There are two types of image density: automatic mode and manual mode.In the automatic mode, the copier automatically detects the density of the original and selects the optimumimage density for it.In the manual mode, the user can...

3-15 1 2 3 4 5 6 7 9 10 11 12 8 4. ORIGINAL IMAGE QUALITY SELECTION You can select the copy mode (Text, Text/Photo, and Photo) and produce clear copies matched to thetype of original. The text mode is suitable for making copies of originals containing text, or text and lineartwork. The Photo mode is...

4-5 1 2 3 4 5 6 7 9 10 11 12 8 How to place originals • When placing originals vertically: Align the edges of the originals and set them all in the samedirection (top to bottom). • When placing originals horizontally: Arrange the originals so that the odd and even pages areplaced alternately in oppo...

4-7 1 2 3 4 5 6 7 9 10 11 12 8 How to place originals on the glass • When setting originals vertically: The first side and second side should be placed in the samedirection (top to bottom). • When setting originals horizontally: The first side and second side should be placed in the oppo-site direct...

4-13 1 2 3 4 5 6 7 9 10 11 12 8 3. IMAGE SHIFT COPYING You can create margins on the copy and specify the position of these margins on either the right or theleft side of the copy. You can also create margins on copies of book originals using DUAL PAGE mode. Page 4-12. The default margins is approxi...

1 2 3 4 5 6 7 9 10 11 12 8 4-14 EDIT MENU 7 Select the desired paper cassette, image density, reproduction ratio and copy quantity. 8 Press the key. 4. EDGE ERASE COPYING If the edges of an original are torn or dirty, they are reproduced as black stains on the copy.Using the edge erase mode, a white...

4-15 1 2 3 4 5 6 7 9 10 11 12 8 5. 2-IN-1/4-IN-1 This function allows you to reduce and copy two or more originals onto a single sheet. Reducing foursheets at a time onto a single sheet is called “4-in-1” copying.Duplex copying of 4-in-1 allows 8 pages to be copied on one sheet.* The reversing autom...

1 2 3 4 5 6 7 9 10 11 12 8 4-20 EDIT MENU 9 For the subsequent originals, repeat step 8 above. 10 When scanning of the last original has finished, select “NO.” Next Original? 3 YES NO 11 Press the key. 6. MAGAZINE SORT (Cont.)

4-23 1 2 3 4 5 6 7 9 10 11 12 8 8. EDITING Mirror Image This function allows you to make mirror-image copies.* This mode is not available together with Image Shift, Sort, Alternation, Duplex copying, Srot/Offset, Dual Page, 2-in-1/4-in-1 and Book > 2. Example of Mirror Image 1 Press the key on th...

1 2 3 4 5 6 7 9 10 11 12 8 4-24 EDIT MENU Negative/Positive Reversal This function allows you to reverse the black areas on the original as white areas, or vice versa.* This function is not available with Edge Erase, Sort, Alternation, Duplex copying, Srot/Offset, Dual Page, 2-in-1/4-in-1, Magazine ...

1 2 3 4 5 6 7 9 10 11 12 8 4-26 EDIT MENU 1 Press the key on the control panel while in the initial screen for copying. 2 Press the key to display the “MIX SIZE”. Then press the key. 3 Press the key to display the “ON”. Then press the key. 4 Select the Automatic paper Selection (APS) mode or Automat...

5-3 1 2 3 4 5 6 7 9 10 11 12 8 2. TIMERS Auto Clear Auto Clear occurs if no machine operation is performed within a certain period of time (Default: 45seconds). Specify a waiting time for Auto Clear. 1 Press the key to enter the program menu. 2 Select “01.DEFAULT SETTINGS” and press the key. DEFAULT...

1 2 3 4 5 6 7 9 10 11 12 8 5-4 PROGRAM MENU After the copier has been inactive for a set period of time (Default: 15 minutes), the copier shifts to theAutomatic Low Power mode automatically. “Saving Energy” appears on the message display of thecopier and the machine switches to a low power consumpti...

5-5 1 2 3 4 5 6 7 9 10 11 12 8 Automatic Sleep If the copier remains idle (Default: 15 minutes with the e-STUDIO16 and 45 minutes with the e-STUDIO20/25) after entering Automatic Low Power mode as explained on the previous page, the copier shifts to the Super Energy Saver mode. The LED turns on and ...

5-11 1 2 3 4 5 6 7 9 10 11 12 8 If the copier is set up so that department codes can be used, you can make copies only after entering thedepartment code.When making copies using department codes, the copy quantity is stored for each individual departmentcode.The department code is a 5-digit number, ...

1 2 3 4 5 6 7 9 10 11 12 8 5-12 PROGRAM MENU 5. DEPARTMENT CODE (Cont.) Master Code Entry 7 Enter a department name for department management and press the key. • Up to 20 characters can be entered for the department name.• The department name for the master code does not have to be entered. • Depar...

5-13 1 2 3 4 5 6 7 9 10 11 12 8 Clearing Department Code Counters 1 Press the key to enter the program menu. PROGRAM 01.DEFAULT SETTINGS 02.LISTS 03.INITIAL SETUP DEFAULT SETTINGS 01.MACHINE DEFAULTS 02.COPY SETUP 03.FAX SETUP MACHINE DEFAULTS 04.WEEKLY TIMER 05.SPEAKER VOLUME 06.DEPARTMENT CODE 2 S...

1 2 3 4 5 6 7 9 10 11 12 8 5-14 PROGRAM MENU 5. DEPARTMENT CODE (Cont.) Deleting Department Code 1 Press the key to enter the program menu. PROGRAM 01.DEFAULT SETTINGS 02.LISTS 03.INITIAL SETUP DEFAULT SETTINGS 01.MACHINE DEFAULTS 02.COPY SETUP 03.FAX SETUP MACHINE DEFAULTS 04.WEEKLY TIMER 05.SPEAKE...

5-15 1 2 3 4 5 6 7 9 10 11 12 8 Change Department Code Setting 1 Press the key to enter the program menu. 2 Select “01.DEFAULT SETTINGS” and press the key. 3 Select “01.MACHINE DEFAULTS” and press the key. PROGRAM 01.DEFAULT SETTINGS 02.LISTS 03.INITIAL SETUP DEFAULT SETTINGS 01.MACHINE DEFAULTS 02....

1 2 3 4 5 6 7 9 10 11 12 8 5-16 PROGRAM MENU 5. DEPARTMENT CODE (Cont.) DEPARTMENT CODE DEPARTMENT NUMBER: 07 ENTER DEPARTMENT CODE: 0409 6 9 Enter a department code and press the key. • The same department code cannot be entered for other departments: 10 Change or delete a setting for other departm...

5-17 1 2 3 4 5 6 7 9 10 11 12 8 Report Printing Print a copy count report for each depar tment by inputting the code number for the desired departmentand then following this procedure.A list of all department codes is printed out if the master code is used. 1 Press the key to enter the program menu....

1 2 3 4 5 6 7 9 10 11 12 8 5-18 PROGRAM MENU Canceling/Resuming Department Management Enable or disable the department management function. 1 Press the key to enter the program menu. 2 Select “01.DEFAULT SETTINGS” and press the key. PROGRAM 01.DEFAULT SETTINGS 02.LISTS 03.INITIAL SETUP DEFAULT SETTI...

1 2 3 4 5 6 7 9 10 11 12 8 5-26 PROGRAM MENU 8. CHANGE DISPLAY PANEL LANGUAGE 1 Press the key to enter the program menu. 2 Select “03.INITIAL SETUP” and press the key. 3 Select “02.LANGUAGE” and press the key. Tip "03.TERMINAL ID" can be selected only when the optionalFAX board kit is instal...

6-1 1 2 3 4 5 6 7 9 10 11 12 8 6. FINISHING MODE SELECTION 1. FINISHING MODE SELECTION .................................................................................... 6-2 2. NON-SORT COPYING ................................................................................................... 6-3 ...

1 2 3 4 5 6 7 9 10 11 12 8 6-2 FINISHING MODE SELECTION 1. FINISHING MODE SELECTION Offset Tray (option) When the Offset Tray is configured, the copied set are collatedor stacked in groups with each set offset. Job Separator (option) The job separator function allows a copied job and an optionalfax ...

1 2 3 4 5 6 7 9 10 11 12 8 6-6 FINISHING MODE SELECTION 4. OFFSET COPYING When the Offset Tray or Finisher is attached, the sets of copies that are collated or stacked in groups areoutput in one pile but each set is offset, as illustrated.Example: Making 6 sets of copies from 3-page originals. (Bypa...

1 2 3 4 5 6 7 9 10 11 12 8 6-10 FINISHING MODE SELECTION 6. STAPLING When the optional finisher is installed, you can use the function that automatically staples Maximumcapacity for stapling.A4, A4-R, B5 (LT, LT-R) 30 sheets B4 20 sheets A3, FOLIO 15 sheets When the optional finisher is installed (o...

1 2 3 4 5 6 7 9 10 11 12 8 6-12 FINISHING MODE SELECTION • To position the staple in parallel with the copy’s top edge, align them to the guide in the diagonal direction. When sets of copies are inserted aligned to the guide, they will be stapled automatically. The staplingdirection varies depending...

7-1 1 2 3 4 5 6 7 9 10 11 12 8 7. WHEN THE GRAPHIC SYMBOL FLASHES 1. DESCRIPTION OF THE GRAPHIC SYMBOLS ............................................................. 7-2 2. LOADING PAPER .......................................................................................................... 7-3 Ad...

1 2 3 4 5 6 7 9 10 11 12 8 7-2 WHEN THE GRAPHIC SYMBOL FLASHES 1. DESCRIPTION OF THE GRAPHIC SYMBOLS The message display panel shows the status of the copier. Whenone of the graphic symbols flashes, go to the pages referencedand take the recommended action. Page 7-12 to 23 Page 7-3 Page 7-5

7-3 1 2 3 4 5 6 7 9 10 11 12 8 2. LOADING PAPER When the paper supply in the selected paper cassette runs out, the Recording Paper Lamp flashes andthe following message appears: 1 Pull the cassette grip up and pull, out the cassette carefully until it comes to a stop. 2 Open a paper package, take ou...

1 2 3 4 5 6 7 9 10 11 12 8 7-4 WHEN THE GRAPHIC SYMBOL FLASHES B A 1 Pulling up the grip, draw out the large-capacity feeder carefully until it comes to a stop. 2 Open some paper packages, take out entire reamsof paper and set them aligned in tray and tray . • When setting the paper, set the paper f...

7-5 1 2 3 4 5 6 7 9 10 11 12 8 3. REPLACING TONER CARTRIDGE 1 Open the front cover of the copier. 2 Release the hook to unlock the Toner Cartridge. 3 Pull the Toner Cartridge out of the copier as shown in the illustration. • Please return the empty toner car tridge to your service technician. When t...

7-7 1 2 3 4 5 6 7 9 10 11 12 8 Additional Explanation The life of the toner cartridge (number of copies) varies depending on the following conditions. 1. Coverage of originals (printing image ratio of the original size) and density of original background. 2. Size and density of originals. 3. The exi...

1 2 3 4 5 6 7 9 10 11 12 8 7-8 WHEN THE GRAPHIC SYMBOL FLASHES Replacing Process Unit 1 Open the stack feed bypass. 2 Open the automatic duplexing unit by pulling up on the release grip. (Not all copiers are equipped with automatic duplexing units.) 3 Open the side cover of the copier. 4. REPLACING ...

7-11 1 2 3 4 5 6 7 9 10 11 12 8 Replacing Ozone Filter The Ozone Filter should be replaced when the Process Unit is replaced.A new Ozone Filter has been provided with the Process Unit. Remove the old Ozone Filter from the copier. Then, install thenew Ozone Filter into the copier. Note • Discard the ...

1 2 3 4 5 6 7 9 10 11 12 8 7-12 WHEN THE GRAPHIC SYMBOL FLASHES 5. CLEARING PAPER JAM • Remove any misfed originals. Use the following procedures to remove an original jammed inthe Reversing Automatic Document Feeder (optional). An originaljammed in the Automatic Document Feeder (optional) can berem...

1 2 3 4 5 6 7 9 10 11 12 8 7-16 WHEN THE GRAPHIC SYMBOL FLASHES 5. CLEARING PAPER JAM (Cont.) 1 Open the side cover. 2 Remove any misfed paper. Then close the cover. Paper Misfeeds in Paper Feed Pedestal (optional) B Paper Misfeed in the Large-Capacity Feeder (option for e-STUDIO20/25) 2 Remove any ...

1 2 3 4 5 6 7 9 10 11 12 8 7-20 WHEN THE GRAPHIC SYMBOL FLASHES 4 Press the two blue levers. To release any p a p e r i n the fuser unit. 5. CLEARING PAPER JAM (Cont.) 5 After clearing paper, return the two blue levers. Close the fuser cover and tighten the two blue screws. Close the exit cover and ...

1 2 3 4 5 6 7 9 10 11 12 8 7-22 WHEN THE GRAPHIC SYMBOL FLASHES 5. CLEARING PAPER JAM (Cont.) 2 Remove any misfed paper inside the relay unit. Paper Misfeed in the Relay Unit (option for e-STUDIO20/25) • If paper is misfed at the inner part of the relay unit, remove it pushing down the blue lever. •...

7-25 1 2 3 4 5 6 7 9 10 11 12 8 Note If the following message remains displayed, repeat the aboveprocedure from steps 1 to 4. Set staple cartridge 7 Turn the staple cartridge to its normal position and push it back into the stapler. • Insert the cartridge until it is caught by the claw and fixed wit...

1 2 3 4 5 6 7 9 10 11 12 8 7-26 WHEN THE GRAPHIC SYMBOL FLASHES 6. ADDING STAPLES (Cont.) Be sure to turn off the copier before replacing the staples. 1 Slide forward and lift up the staple cover. 2 Pull out the staple cartridge. 3 Press the cartridge knob to remove the empty staple case. 4 Insert a...

7-27 1 2 3 4 5 6 7 9 10 11 12 8 5 Peel off the tape from the case. 6 Attach the cartridge to the stapler. • Insert the cartridge until it clicks. 7 Close the staple cover. 8 With copier power on, insert a sheet of paper into the stapler several times to advance the staples into position. (5 to 10 ti...

1 2 3 4 5 6 7 9 10 11 12 8 7-28 WHEN THE GRAPHIC SYMBOL FLASHES 7. REMOVING JAMMED STAPLES Finisher (option for e-STUDIO20/25) 1 Perform steps 1 and 2 of the procedure for “6. ADDING STAPLES Finisher ” ( Page 7-22) . 3 Remove any jammed staples using your fingertip or something sharp. 4 Holding the ...

7-31 1 2 3 4 5 6 7 9 10 11 12 8 When the message display shows the following message, copying cannot be performed any longer. 8. CALLING FOR SERVICE The telephone number of your service technician will be displayed (if pre-programmed).Note the phone number, then turn the power off and immediately ca...

1 2 3 4 5 6 7 9 10 11 12 8 7-32 WHEN THE GRAPHIC SYMBOL FLASHES 9. PERIODIC MAINTENANCE Note When the either of the following messages appears on the message display: Time for maintenance Maintenance/Drum This indicates that assistance from a qualified service technician is required. Call for servic...

1 2 3 4 5 6 7 9 10 11 12 8 8-2 USER TEST MODE AUTO TEST 1. AUTOMATIC TEST MODE AUTO TEST mode, permits you to automatically perform a series of copier tests in one operation. The test items performed by the AUTO TEST are: • FLASH ROM TEST Checks the program data, function data, and language data. • ...

8-3 1 2 3 4 5 6 7 9 10 11 12 8 2. INDIVIDUAL TEST MODE INDIVIDUAL TEST Summary In INDIVIDUAL TEST mode, you can perform specific tests on this copier. 1 Press the key to enter the program menu. 2 Select “05.TEST MODE” and press the key. 3 Select “02.INDIVIDUAL TEST” and press the key. PROGRAM 01.DEF...

1 2 3 4 5 6 7 9 10 11 12 8 8-12 USER TEST MODE 10. PRINTING A TEST RESULT This test result list prints out the results of the auto and individual tests as a self test report. 1 Press the key to enter the program menu. 2 Select “05.TEST MODE” and press the key. 3 Select “03.TEST RESULT LIST” and pres...

1 2 3 4 5 6 7 9 10 11 12 8 9-2 MAINTENANCE 1. DAILY INSPECTION Items to inspect every morning Power switch ON/OFF status • We recommend turning the power switch ON at startup every morning so that copies can be made whenever you want. Also,make sure that you turn the power switch OFF when you leavet...

9-3 1 2 3 4 5 6 7 9 10 11 12 8 2. CLEANING THE WIRE When the black lines in the direction of paper feed are generated on the copy, clean the charger wire.BE SURE TO TURN OFF THE POWER before cleaning the charger wire. Cleaning the charger wire 1 Open the front cover. 2 Clean the charger. • Hold the ...

1 2 3 4 5 6 7 9 10 11 12 8 9-4 MAINTENANCE Cleaning the transfer charger wire 1 Making sure that the stack feed bypass and the automatic duplexing unit (if installed) are opened, open the side cover. 2 Clean the transfer charger wire using the attached charger cleaning accessory. 3 Close the side co...

9-5 1 2 3 4 5 6 7 9 10 11 12 8 3. SIMPLE TROUBLESHOOTING Countermeasure Press any key except for the key. (It takes a while until the copier becomes ready.) Input the correct department code. Wait until the copier becomes ready. Reference page _ 1-13 1-10 Items to be checked Is the copier in the Ene...

1 2 3 4 5 6 7 9 10 11 12 8 9-6 MAINTENANCE 3. SIMPLE TROUBLE SHOOTING (Cont.) Copies are stained Countermeasure Close the cover firmly to shut out any external light. C l e a n t h e o r i g i n a l g l a s s w i t h a c l o t h moistened with cleaning liquid. Then wipe it with a dry cloth. C l e a ...

10-1 1 2 3 4 5 6 7 9 10 11 12 8 10. SPECIFICATIONS & OPTIONS 1. e-STUDIO16/20/25 SPECIFICATIONS ........................................................................ 10-2 2. SPECIFICATION OF OPTIONS ................................................................................... 10-3 3. PA...

10-3 1 2 3 4 5 6 7 9 10 11 12 8 2. SPECIFICATION OF OPTIONS Model Name Copy Sides Number of Originals Acceptable Original Size Power Source Dimensions Weight Automatic Document Feeder MR-2012 Single-side Up to 50 originals (64 to 80 g/m 2 ) or stacked height of originals 8 mm or less Maximum A3 Mini...

1 2 3 4 5 6 7 9 10 11 12 8 10-4 SPECIFICATIONS & OPTIONS Automatic Duplexing Unit Model Name Acceptable Originals Power Source Dimensions Weight MD-0101 Maximum A3 Minimum A5-R Paper weight 64 to 80 g/m 2 Supplied from the copier 101 mm (W) x 488 mm (D) x 345 mm (H) Approx. 4.3 kg Paper Feed Uni...

1 2 3 4 5 6 7 9 10 11 12 8 10-6 SPECIFICATIONS & OPTIONS Stack Feed Bypass Model Name Acceptable Paper Loading Capacity Power Source Dimensions Weight MY-1016 Continuous feed: 64 to 80 g/m 2 Single sheet feed: 80 to 163 g/m 2 100 sheets (Height of 16 mm or less when loaded) Supplied from the cop...

10-7 1 2 3 4 5 6 7 9 10 11 12 8 Paper Feeding Controller(Control for Paper Feed Unit, Paper Feed Pedestal, Large-capacity Feeder, and Automatic Duplexing Unit) Model Name GH-1010 (e-STUDIO16) GH-1020 (e-STUDIO16/20/25) Memory Kit Model Name GC-1050 (64 MB) Other Optional Kits GF-1110 GA-1030 GA-1031...

1 2 3 4 5 6 7 9 10 11 12 8 10-8 SPECIFICATIONS & OPTIONS 4. COPY FUNCTION COMBINATION MATRIX e-STUDIO16/20/25 Copy Function Combination Table The reason why the combination is not available. *1 When 2nd function is programmed, the 1st function is cleared. *2 When 2nd function is programmed, the ...