Toshiba DAZ8823A - Manuals

8 Overview The modem provides you with high-speed data communications over the television cable network by following the widely accepted DOCSIS standards that were developed by Cable Television Laboratories, Inc. This standard offer a combination of high performance and interoperability among many o...

10 Getting Started Contacting your Cable Provider Please keep in mind that you will need to notify your cable internet provider before using the new Toshiba PCX2600, even if you have a cable modem that is currently functioning with your computer. Package Contents for the PCX2600 Make sure that you’ ...

11 Installing the USB Drivers If you are using the USB(Universal Serial Bus) interface to connect the PCX2600 to your Windows PC via the USB, you must insta ll the " USB Driver" in your computer. The USB Drivers for your operating system is located in the CD-ROM shipped with the PCX2600. Ple...

12 Important Information If you have trouble installing the USB drivers for yo ur new PCX2600, you may have inadvertently installed the USB Composite Device Driver that Windows 98SE automatically loads. To correct this problem, please execute the instructions. USB COMPOSITE DRIVER REMOVAL (1)Make su...

13 LED Diagnostics The PCX2600 has five status LEDs for diagnostics. You can monitor the LEDs during installation and during normal operations . Table 1 shows PCX2600 status LEDs and identifies what each LED light means. This table will help you to diagnose problems. Function Color Definition Cable ...

14 How to Use the Stand Please attach the stand to the front of the PCX2600, referring to the figure below.

15 Specifications The Toshiba PCX2600 is DOCSIS compliant. <RF Interface> Receiver Physical Speed: 30 Mbps (64QAM) / 43 Mbps (256QAM) Symbol rate : 5.056941 Msym/sec (64QAM) 5.360537 Msym/sec (256QAM) Demodulation: 64QAM / 256QAM Bandwidth: 6 MHz Frequency range: 88 MHz to 8 60 MHz (edge-to-ed...

18 Q: Where can I download the driver for my PCX2600 ? A: If you are using LAN inter face, the PCX2600 is a stand -alone device that ha s a Ethernet port. All workstations or hub must have a 10BASE-T/100BASE-TX port or card to connect to the PCX2600. Since the PCX2600 is a stand alone device, there ...

19 Regulatory <>FCC Notice: This equipment has been teste d and found to comply with the limits for a Class B personal computer and peripherals, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal...

20 Glossary 10BASE-T Unshielded, twisted pair cable with an RJ -45 connector, used with Ethernet LAN. “10” indicates the speed (10 Mbps), “Base” refers to baseband technology, and “T” means twisted pair cable. 100BASE-TX Unshielded, twisted pair cable with an RJ -45 connector, used with Ethernet LAN...