Page 2 - WARNING
2 WARNING: This indicates an important item where incorrect operation may lead to injury or death. Never attempt to touch laundry in the spin basket until the motion of thebasket stops completely. Laundry in the basket may become wrapped around the hand, even when the basket is onlymoving slowly.Use...
Page 3 - CAUTION; DESCRIPTION OF PARTS
3 CAUTION CAUTION: This indicates an important item where incorrect operation may lead to injury or material damage. Do not pull the cord when unplug the appliance. Hold the plug body to unplug.It can cause electrical shock or malfunctions that lead to injuries. Do not use water with temperatures ov...
Page 4 - DESCRIPTION AND OPERATION OF PANEL PARTS; RESUME FUNCTION
4 2 1 DESCRIPTION AND OPERATION OF PANEL PARTS CHILD PROOF MODE DISPLAY • Check this to see if the CHILDPROOF mode is ON (lit) orwarning (flashing). PROCESS DISPLAY • Operating process is indicated byflashing. Remaining process isindicated by lightening. “START/HOLD” button • Press this pad when you...
Page 5 - CHILD PROOF MODE; HOW TO USE CHILD PROOF MODE; PRESET MODE; How to use preset mode
5 CHILD PROOF MODE (if you have small children) This model is equipped with CHILD PROOF mode. After this mode is set to ON, the washer will alarm you if the lid is openedduring operation. If you find accident such as falling of child into wash tub, please take necessary safety action urgently. If th...
Page 6 - HOW TO OPERATE; If you wish to turn off the end buzzer sound
6 HOW TO OPERATE Preparation 1 Set drainage hose for drain. 2 Set the water supply hose correctly. 3 Turn the water faucet on. • Make sure that there are no sign of water leakage at water tap or inletvalve. 4 Connect the power plug. "REGULAR" "SOAK" "SPEED" "HEAVY" ...
Page 8 - CUSTOM WASH CYCLES; If you wish to change the shower rinse to the static rinse
8 3 Close the lid and press the START button. • To use drain only, leave the lid open.After error display appears, turn the power off. CUSTOM WASH CYCLES You can select the operation that you want — suchas spin only or rinsed water reuse. "OVERFLOW RINSE" cycle OVERFLOW RINSE cycle compared ...
Page 9 - LAUNDRY GUIDE; If you feel the water amount is less or much; When using liquid detergent and bleach; Recommended detergent amount
9 LAUNDRY GUIDE If you feel the water amount is less or much Water level is automatically setto suit the laundry amount. If youfeel the water amount is less orm u c h , yo u c a n a d j u s t i t b yfollowing. If you feel the water amount is much. If you feel the water amount is less. Turn the POWER...
Page 10 - MAINTENANCE; Softener case; Washing machine body and panel; Lint collector
10 MAINTENANCE Softener case Remove and clean after every ten usages.Removal1 Hold down the each. 2 And pull toward you. Installation1 Fit in the bottom. 2 Then press in the top until thecatch catches. Caution • Water in the case may freeze in cold weather.If this occurs, remove the case, immerse in...
Page 11 - INSTALLATION; Choosing an installation location
11 INSTALLATION Install your washing machine in a level, stable place. • It is dangerous to place the washing machine in anunstable location, since it may move during vibration. • It will increase the sound produced by the machine when itvibrates during use. When you move washing machine, hold the h...
Page 12 - Moving the drainage hose; Installing the drainage hose; Installing the ground pin
12 Moving the drainage hose The drainage hose can be installed on either the right or left side. The connector port for the drainage hose is found on the right side of the washing machine, but it can be changed withoutdisconnecting the internal hose from the drainage valve. 1 Remove the back cover, ...
Page 13 - Attaching the water supply hose to the faucet; If the filling water becomes not good
13 INSTALLATION Attaching the water supply hose to the faucet If you attach the water supply hose completely, it may cause a water leakage. Faucet shape Wall-mounted faucets are best. The distance is needed1.6 cm or more Attaching the hose union1 Push the lock lever of the watersupply hose. Pulling ...
Page 14 - BEFORE CALLING THE SERVICEMAN
14 BEFORE CALLING THE SERVICEMAN WHEN CHECK TREATMENT does not operate making noise water leak does not beep theend buzzer Please confirm whether a power failure or fusebreaker is cut. Then draw out power supplyplug, insert once again and turn the powerswitch on. Please correct the inclination or no...
Page 15 - SPECIFICATIONS
15 The following are not malfunctions. BEFORE CALLING THE SERVICEMAN When: Check: The first time you use your washing machine,a small amount of water may drain out of thedrainage hose. During operation the control panel gets warm. The pulsator rotates bit by bit. During washing and rinsing, lamps fl...
Page 16 - MANUFACTURED BY
6348100701 MANUFACTURED BY TOSHIBA CONSUMER PRODUCTS (THAILAND) CO., LTD. 6348100701 (01-Cover) 22/10/08, 11:12 2