Page 2 - PROPER TELEVISION PLACEMENT MATTERS
2 TOSHIBA CARES • Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. • As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the...
Page 3 - Safety Precautions; WARNING; NOTE TO CATV INSTALLERS
3 Dear Customer, Thank you for purchasing this Toshiba LED TV. This document will help you use the many exciting features of your new LED TV. Before operating your LED TV, carefully read this manual completely. Safety Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE T...
Page 4 - Additional Safety Precautions
4 Installation, Care, and Service Installation Follow these recommendations and precautions and heed all warnings when installing your TV: 19) WARNING: NEVER expose batteries to excessive heat such as sunshine or fire. 20) ALWAYS plug the product into an outlet that is located in such a manner that ...
Page 6 - Choosing a location for your LED TV
6 CAUTION: Leave the TV standing in its packaging box until you have attached the support column and the stand. If the TV is laid down, it may become damaged. CAUTION: Two or more people are required for installation to avoid injury or damage to the TV. 84L9300U Series: CAUTION: Attach the stand whi...
Page 7 - Safety Precautions for 3D glasses
7 Removing the Pedestal Stand Note: Extreme care should always be used when attaching the pedestal stand to avoid damage to the LCD panel. 58L9300U/65L9300U Series: 1) This process will require 2 or more people. Toshiba recommends using 3 people for this process. One person on each side of the TV an...
Page 9 - FCC Declaration of Conformity
9 IMPORTANT: If you see a double image, your eyes are either too high or too low in relation to the horizontal center of the screen. Adjust your position so that it is closer to the center to avoid eye fatigue and to enjoy optimum 3D effects. Notes on handling the 3D glasses: • When cleaning the 3D ...
Page 10 - Trademark Information; Important notes about your TV
10 are not visible when the picture is viewed from a normal viewing distance. Note: Interactive video games that involve shooting a “gun” type of joystick at an on-screen target may not work with this TV. Trademark Information • AutoView, Cinema Series, ClearScan, ColorMaster, ColorStream, CQ Engine...
Page 12 - Contents; HDMI
12 Contents Chapter 1: Introduction ...................................................20 Safety icons ............................................................... 20 Features .................................................................... 21 Overview of installation, setup, and use ...........
Page 14 - Adjusting your viewing position
14 Contents Chapter 4: nitial Setup and Menu ....................................55 Initial setup ............................................................... 55 Performing the initial setup ................................. 56 Navigating the menu system ............................... 65 Quick M...
Page 19 - Acceptable signal formats for PC IN, and HDMI
Contents 19 Wireless connection ................................................ 188 Ethernet ............................................................. 188 USB ................................................................... 188 SD card ...........................................................
Page 20 - Introduction; Safety icons; instructions as follows:; NOTE; Provides important information.; Chapter 1
20 Introduction Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons hig...
Page 21 - Features; “3D Signal formats*”
Introduction 21 Features ❖ Integrated digital tuning (8VSB ATSC and QAM) — Eliminates the need for a separate digital converter set-top box (in most cases). ❖ 3840 x 2160 display resolution. ❖ Quad FHD — Allows you to enjoy high quality full HD pictures using the 4K panel and the 4K extended definit...
Page 22 - “ColorMasterTM” on page 116
22 Introduction standard colors, see “ColorMaster™” on page 116 . ❖ ClearScan ® —Technology uses both frame interpolation technology and advanced backlight control with image synchronization to quadruple the TV refresh rate for an even clearer fast motion video. See “ClearScan ® ” on page 115 . ❖ Dy...
Page 23 - “Overview of cable types”; POWER; for a few seconds and then plug them in and try again.
Introduction 23 pillar, or other immovable structure, see 24) on page 4. ❖ Place the TV in a location where light does not reflect on the screen. ❖ Place the TV far enough from walls and other objects to allow proper ventilation. Inadequate ventilation may cause overheating, which will damage the TV...
Page 24 - TV front and side panel controls and connections; connections; Front panel; Ambient light sensor; —This sensor detects the ambient light; Remote Sensor; —Point the remote control toward this remote
24 Introduction TV front and side panel controls and connections 58” front panel 65” front panel 84” front panel 2 USB ports left side (common) 1 SD card slot 3 HDMI™ ports1 Analog Video port ARC HDMI™ only port 1 Digital Audio jack Power LED 3D IR Remote sensor Ambient light sensor (Sample Illustra...
Page 25 - Left side
Introduction 25 Left side 5 Analog Video Port —Analog Video input. Connect using a commercially available conversion cable. 6 3 HDMI ™ Ports —High-Definition Multimedia Interface input receives digital audio and uncompressed digital video from an HDMI ™ device or uncompressed digital video from a DV...
Page 26 - TV back panel controls and connections
26 Introduction TV back panel controls and connections ANT/CABLE OUT FIXED AUDIO OUT IR HDMI IN 4 PC IN LAN IN PC/HDMI 2 AUDIO COLOR STREAM HD / VIDEO 2 IN R AUDIO L / MONO P R P B Y VIDEO POWER button Volume up FOR SERVICE USE ONLY Volume downSwitches the function of VOL+/- buttons to select volume...
Page 27 - (Sample Illustration) L9300U Series back panel controls and; Back panel controls; In Volume mode, the arrow buttons increase or decrease the
Introduction 27 ANT/CABLE OUT FIXED AUDIO OUT IR HDMI IN 4 PC IN LAN IN PC/HDMI 2 AUDIO COLOR STREAM HD / VIDEO 2 IN R AUDIO L / MONO P R P B Y VIDEO POWER button Volume up FOR SERVICE USE ONLY Volume downSwitches the function of VOL+/- buttons to select volume, channel, or input mode. HDMI™ IN port...
Page 28 - Back panel connections; “Connecting DVD to ColorStream; Component/Standard (composite) video cables carry only video
28 Introduction The mode of the VOL +/– buttons change in the following order each time the button is pressed: → Channel → Input → Volume → Back panel connections 4 LAN IN —Connects the TV to your home network. 5 HDMI ™ IN —High-Definition Multimedia Interface input receives digital audio and uncomp...
Page 29 - Connecting Your TV; Overview of cable types; cable converter box to the ANT/CABLE input on your TV.; Please tighten this connection by hand. Using tools may damage the; Chapter 2
29 Connecting Your TV Overview of cable types Before purchasing cables, know the connector types your devices require. You can purchase cables from most stores that sell audio/video devices. Coaxial cable (F-type) (Sample Illustration) Coaxial cable Coaxial (F-type) cable connects your antenna, cabl...
Page 30 - (Sample Illustration) Component video cables; cable; Dual-wand IR blaster cable
30 Connecting Your TV Standard A/V cables (composite video) usually come in sets of three, and connect to video devices with analog audio and composite video output. These cables (and the related inputs on your TV) are typically color- coded according to use: yellow for video, red for stereo right a...
Page 31 - Optical audio cable; (Sample Illustration) Optical audio cable; PC IN; “Connecting a computer to the TV’s PC IN terminal”; Separate audio cables are required.
Connecting Your TV 31 Optical audio cable (Sample Illustration) Optical audio cable Optical audio cable connects receivers with Dolby ® Digital or PCM (pulse-code modulation) optical audio input to the TV’s Digital Audio Out terminal, see “Connecting a digital audio system” on page 38 . Analog RGB (...
Page 32 - LAN cable; Standard LAN cable connects the TV to your home network, see; About the connection illustrations; You can connect different types and brands of devices to your TV in; box; (Sample Illustration) L9300U Series—Connecting to an antenna,
32 Connecting Your TV LAN cable (Sample Illustration) LAN cable Standard LAN cable connects the TV to your home network, see “Connecting the TV to a home network with an Internet connection - wired” on page 47 . Crossover LAN cable connects the TV directly to a computer, see “Connecting the TV direc...
Page 33 - When you use a cable box, you may not be able to use the remote control; To view the antenna or cable signal:; “Selecting the video input to view” on page 85; you to civil and criminal liability.
Connecting Your TV 33 Items needed: ❖ Coaxial cables ❖ Standard AV cables ❖ Component video cables (red/green/blue) NOTE When you use a cable box, you may not be able to use the remote control to program or access certain features on the TV. To view the antenna or cable signal: Select ANT/CABLE vide...
Page 34 - Connecting DVD to ColorStream; (Sample Illustration) L9300U Series—Connecting a DVD with; COLOR; “Connecting an HDMITM or DVI device to the HDMITM input”; When you use ColorStream
34 Connecting Your TV Connecting DVD to ColorStream ® or VCR to composite video VIDEO AUDIO L R COMPONENT VIDEO P B P R Y AUDIO OUT L R R G B R G B R R W R W R W R W Y Y COLOR STREAM HD / VIDEO 2 IN R AUDIO L / MONO P R P B Y VIDEO TV back panel Yellow VCR DVD player White Red Green Blue Component v...
Page 35 - Connecting remote IR devices; Using the IR blaster OUT terminal; “Dual-wand IR blaster cable” on
Connecting Your TV 35 To view antenna or Cable channels: Select the ANT/CABLE video input source on the TV.* To view the DVD player: Turn ON the DVD player. Select the ColorStream ® HD video input source on the TV.* To view satellite programs using the component video connections: Turn ON the satell...
Page 36 - “If you cannot locate the device’s; If you do not have a second device, coil the second wand with a rubber; (Sample Illustration) L9300U Series—Using the IR blaster OUT
36 Connecting Your TV To connect the IR blaster cable: 1 Locate the infrared sensor on the front of your device. This sensor is marked on some devices. If you are having issues locating the device's infrared sensor, see “If you cannot locate the device’s infrared sensor:” on page 37 . 2 Align one of...
Page 37 - “Setting the IR Blaster” on page 61; Satisfactory quality may not be attainable with certain devices.; If you cannot locate the device’s infrared sensor:
Connecting Your TV 37 To control the device(s): Point the TV remote control toward the front of the TV and press the button for the desired function. The signal passes from the remote control through the TV to the device via the IR Blaster cable. For more information, see “Setting the IR Blaster” on...
Page 38 - (Sample Illustration) L9300U Series—Connecting a digital audio; Connecting a digital audio system
38 Connecting Your TV Connecting a digital audio system The TV’s Digital Audio Out terminal outputs a Dolby ® Digital or 2-channel down-mixed PCM (pulse-code modulation) signal for using with an external Dolby ® Digital decoder or other external audio systems with optical audio input.You will need a...
Page 39 - Connecting an HDMI; “HDMITM signal formats” on page 191; To connect a PC to the HDMITM input, see
Connecting Your TV 39 Connecting an HDMI ™ or DVI device to the HDMI ™ input The HDMI ™ input on your TV receives digital audio and uncompressed digital video from an HDMI ™ source device, or uncompressed digital video from a DVI (Digital Visual Interface) source device.This input is designed to acc...
Page 40 - (Sample Illustration) L9300U Series—Connecting an HDMI; To view the HDMI; To ensure that the HDMI; properly with the TV.
40 Connecting Your TV HDMI OUT DVI /HDCP OUT R L OUT IN PC/HDMI 2 AUDIO HDMI IN 4 HDMI IN HDMI IN Analog audio cable HDMI TM -to-DVI adapter cable HDMI TM cable DVI device TV back panel HDMI TM device (satellite or cable box, media player, etc) (Sample Illustration) L9300U Series—Connecting an HDMI ...
Page 41 - “HDMITM CEC Control input source selection” on; Using the TV remote and HDMI
Connecting Your TV 41 Using the TV remote and HDMI ™ CEC Control to control other devices To control the basic functions of connected audio/video devices using the TV’s remote control, connect an HDMI ™ CEC compatible audio system or playback device. The HDMI ™ CEC Control feature uses CEC technolog...
Page 42 - (Sample Illustration) L9300U Series— Connecting to HDMI
42 Connecting Your TV When using an external AV amplifier the picture and sound may not be properly synchronized. In this case, adjust the delay time of the sound on the AV amplifier. NOTE The control range of the delay time differs according to the device you use. Connecting an HDMI ™ audio system ...
Page 43 - Connecting a computer; With either the PC IN or HDMI; Connecting a computer to the TV’s PC IN terminal; When connecting a computer to the PC IN terminal on the TV, use an; (Sample Illustration) L9300U Series—Connecting to a computer; The PC audio input terminal on the TV is shared with the HDMI 2
Connecting Your TV 43 Connecting a computer With either the PC IN or HDMI ™ connection, you can view your computer’s display on the TV and hear the sound from the TV’s speakers. Connecting a computer to the TV’s PC IN terminal When connecting a computer to the PC IN terminal on the TV, use an analog...
Page 44 - Some computer models cannot be connected to this TV.; Connect a computer to the TV’s HDMI; “Overview of cable types” on page 29; (Sample Illustration) L9300U Series—Connecting to an HDMI
44 Connecting Your TV ❖ Some computer models cannot be connected to this TV. ❖ If the computer has a compatible mini D-sub15-pin terminal, an adapter is not required. ❖ Depending on the content’s title and the computer’s specifications, some scenes may be skipped or you may not be able to pause duri...
Page 45 - “Acceptable signal formats for PC IN, and HDMITM, and 3D” on page; The edges of the picture may be hidden.; Connecting to a home network; The LAN port allows your Toshiba TV to connect to your home network.; Internet connection
Connecting Your TV 45 The supported signal formats are VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz), 1080p (24Hz/30Hz/60Hz) and 4K formats. For signal specifications, see “Acceptable signal formats for PC IN, and HDMI™, and 3D” on page 190 . NOTE ❖ The edges of the...
Page 46 - Standard LAN cables; (Sample Illustration) L9300U Series—Connecting a network without
46 Connecting Your TV Connecting the TV to a home network without an Internet connection Items needed: ❖ Standard LAN cables ❖ Router with a hub LAN Computer Computer Router with a hub TV back panel (Sample Illustration) L9300U Series—Connecting a network without Internet connection Connecting to a ...
Page 47 - Connecting the TV to a home network with an Internet connection -; (Sample Illustration) L9300U Series—Connecting with Internet
Connecting Your TV 47 Connecting the TV to a home network with an Internet connection - wired Items needed: ❖ Coaxial or telephone cable (depending on your modem type) ❖ Standard LAN cables ❖ Router with Hub ❖ Modem (DSL or cable) LAN Cable or Phone jack 1 2 2 2, 3 Computer Modem (DSL or cable) Rout...
Page 49 - Connecting the AC cord on your TV (for 84L9300U Series); Place the ferrite core attachment around the AC cord near the; Wash hands after handling.; Make sure to connect the AC cord plug into the AC IN terminal; Connecting the AC cord on your TV (for 84L9300 Series)
Connecting Your TV 49 of certain Wi-Fi equipment that are based on the draft version of IEEE 802.11n. Connecting the AC cord on your TV (for 84L9300U Series) 1 Place the ferrite core attachment around the AC cord near the connection end. (Sample Illustration) Ferrite core attachment 2 Snap the ferri...
Page 50 - Using the Remote Control; Controlling other devices; The TV’s remote control can operate other devices as described in; Installing batteries; To install batteries:; Slide back and pull up to open the cover.; Chapter 3
50 Using the Remote Control Controlling other devices The TV’s remote control can operate other devices as described in “Setting the IR Blaster” on page 61 . Installing batteries To install batteries: 1 Slide back and pull up to open the cover. (Sample Illustration) Removing the battery cover Chapte...
Page 51 - Install two AAA size batteries.; (Sample Illustration) installing the batteries
Using the Remote Control 51 2 Install two AAA size batteries. NOTE Use carbon zinc batteries or alkaline batteries. (Sample Illustration) installing the batteries 3 Slide on the cover. Do not expose batteries to excessive heat such as sunshine, fire, etc. NOTE v Dispose of batteries in a designated ...
Page 52 - Remote control effective range; For optimum performance, aim the remote control directly at the TV
52 Using the Remote Control Remote control effective range 1 For optimum performance, aim the remote control directly at the TV and make sure there are no obstructions between the remote control and the TV. 16.4 ft (5m) 16.4 ft (5m) 16.4 ft (5m) 65” 58” 84” (Sample Illustration) Remote control effec...
Page 53 - Learning about the remote control; CEC Control functions, see
Using the Remote Control 53 Learning about the remote control Only the buttons used to operate the TV are described in this section.For the HDMI ™ CEC Control functions, see “Using HDMI™ CEC Control” on page 95 . 1 2 4 5 7 10 11 1314 16 18 19 2123 25 2728 29 31 32 34 35 3 6 8 9 12 151720 22 24 26 30...
Page 54 - function that is not available.
54 Using the Remote Control NOTE The error message “Not Available” may appear if you press a button for a function that is not available. Learning about the remote control Item: Description: Function: 1 POWER button Turns the TV On and Off. When the TV is on, the power LED indicator on the TV front ...
Page 55 - Initial Setup and Menu; Initial setup; When you first turn on or reset the TV, the; Menu Language; screen; Chapter 4
55 Initial Setup and Menu Initial setup When you first turn on or reset the TV, the Menu Language screen appears. NOTE v You can stop initial setup by pressing the EXIT button. However, if you do not finish Channel Tuning setting, the Quick Setup screen will appear every time you turn on your TV. v ...
Page 56 - Performing the initial setup; (Sample Illustration) Selecting Menu Language; Welcome; Progress window; (Sample Illustration) Quick Setup and Welcome window
56 Initial Setup and Menu Performing the initial setup 1 Menu Language Select a language and press the OK button. Please press [OK] to proceed. Menu Language English Français Español (Sample Illustration) Selecting Menu Language v Quick Setup screen will appear. About the Quick Setup screen The Quic...
Page 58 - Performing the Quick Setup; This option is hidden in the Home Mode.
58 Initial Setup and Menu Performing the Quick Setup 1 Country Select a country then press the OK button. 2 Time Zone Select Time Zone , and select a time zone from the submenu. Select Daylight Saving Time , and select On or Off from the submenu. Select Next . 3 Store / Home Mode Select Store / Home...
Page 59 - “Setting up the Network” on page; use a wireless access point with encryption.
Initial Setup and Menu 59 NOTE v Easy Setup . If your Access Point (AP) supports WPS, this method can be used. WPS is a standard designed to simplify the connection of wireless LAN equipment and the setup of network security features. v Assisted Setup (setup using the AP's notification information)....
Page 60 - for; Channel Tuning; If you want to stop scanning, pressing the; EXIT; button while scanning is in; (Sample Illustration) Auto Tuning Results screen
60 Initial Setup and Menu Performing the initial setup 2 Select Media Renderer , and select On or Off from the sub menu. When On is selected, the Media Renderer function can be used. 3 Select Next . 6 Channel Tuning Select Antenna or Cable , and select Start Scan . Auto Tuning will start. While scan...
Page 61 - The IR Blaster may not work with some devices, and it may not control; Setting the IR Blaster
Initial Setup and Menu 61 Performing the initial setup If some channels are not found after scanning: v Check the antenna/cable connections, and scan again. v Connect the TV to the antenna or cable box directly and scan again. 1 Press the SETUP button. Select Installation > Quick Setup and press ...
Page 62 - Code Set.” You will need to choose a code set using the
62 Initial Setup and Menu v CD Player v Video Accessory 2 Press the q button then press the GREEN button. The Brand screen will appear. 3 Use the p / q (arrow) buttons to select the brand name then press the OK button. v Select a field and press the OK button to show the software keyboard. Enter the...
Page 63 - PC; Amplifier; When
Initial Setup and Menu 63 2 Press the OK button. Input & Mode Key screen will appear. Input & Mode Key 1 Use the t / u (arrow) buttons to select the TV input to which the IR device is connected. v --- (Appears when Device Type is set to Receiver , Misc Audio or Amplifier ) v ANT/CABLE v Vide...
Page 65 - SETUP; OK; Navigating the menu system
Initial Setup and Menu 65 Navigating the menu system v To open the menu system, press the SETUP button on the remote control. Picture Sound Options Installation Network 3D Get Help Timers < Picture Reset Picture Mode Standard 0 100 0 0 0 0 Backlight Contrast Brightness Color Tint Sharpness Advanc...
Page 66 - QUICK; button to display the Quick menu and press the; Quick Menu
66 Initial Setup and Menu Quick Menu Quick menu helps you access some options more quickly.Press the QUICK button to display the Quick menu and press the p / q (arrow) buttons to select an option. NOTE Quick menu items differ depending on the current mode. Quick Menu Item Page Intel ® WiDi page 140 ...
Page 67 - Setting up your TV; How to navigate the menu; Changing initial settings; A confirmation message appears.; Individual settings; Français, and Español). The TV displays menus and messages in your; Chapter 5
67 Setting up your TV How to navigate the menu ❖ Press the SETUP button. Select Installation , Main menu, Submenu, and then press the OK or EXIT button. Changing initial settings From Quick Setup: 1 Press the SETUP button. 2 Select Installation > Quick Setup , and press the OK button. A confirmat...
Page 68 - You can select the country in which you reside.; your time zone; Daylight Saving Time; to designate the TV location. Select
68 Setting up your TV Country You can select the country in which you reside. 1 Press the SETUP button. 2 Select Installation > Country and press the OK button. 3 Press the p / q (arrow) buttons to select the country. 4 Press the OK button. Time Zone This setting allows you to specify the correct...
Page 69 - Auto Tuning; “Initial setup” on
Setting up your TV 69 3 Press the p / q (arrow) buttons to select Antenna or Cable . 4 Press the OK button. 5 Select Start Scan . After scanning is complete, the auto tuning results screen will appear. 6 Press the OK or EXIT button. Storing channels in memory (optional) To make sure your TV stops on...
Page 70 - Manual Tuning; button again to begin Manual Tuning.; To prevent a channel from being viewed, you can set it to be skipped.; Skipping channels
70 Setting up your TV Manual Tuning After storing channels in memory, you can manually enter channels if the channel number is known. 1 Press the SETUP button. 2 Select Installation > Channel Tuning > Manual Tuning , and then press the OK button. 3 Use buttons 0–9 on the remote control to ente...
Page 71 - You cannot tune skipped channels using the; CH; buttons 0–9 and the; DASH; button on the remote control.; Skipping video inputs; button again to turn off; Labeling analog TV channels; The Software Keyboard window appears.
Setting up your TV 71 NOTE You cannot tune skipped channels using the CH or buttons. Use buttons 0–9 and the DASH button on the remote control. Skipping video inputs You can set video inputs to be skipped when selecting inputs in the Input selection screen. To turn on skip 1 Press the SETUP button. ...
Page 72 - Labeling video inputs; When entering arbitrary characters, press the; Configuring shared input; To apply the setting, switch the input to PC or HDMI 2.
72 Setting up your TV Labeling video inputs Labeling video inputs The input labels are shown in the input selector and banner displays. You can label video inputs according to the devices you have connected to the TV. 1 Press the SETUP button. 2 Select Options > Input Option > Input Labeling a...
Page 73 - Basic features; Using 3D functions; Compatible 3D playback device or 3D source.; Use the type of 3D glasses that are compatible with to your TV.; Chapter 6
73 Basic features Using 3D functions Before using the 3D function, note the following:In addition to compatible 3D glasses, viewing 3D programming requires the following (not included): ❖ Available 3D glasses : For 58L9300U Series: Toshiba FPT-AG03 (supplied)For 65L9300U/84L9300U Series: Toshiba FPT...
Page 75 - “Safety Precautions for 3D glasses” on page 7; Viewing 3D images; “Setting the auto start mode” on page 81
Basic features 75 NOTE Watching the TV: ❖ Proper 3D effects or 3D-to-2D conversion results may not be obtained depending on the received 3D content. ❖ 3D effect and image quality may vary depending upon content quality and display device capability/ functionality/settings. ❖ Wear the 3D glasses prop...
Page 76 - Switching display mode or selecting 3D format; There are four TV viewing modes:
76 Basic features ❖ When viewing 3D images, wear the 3D glasses. ❖ The 2D to 3D conversion function is activated and controlled by you according to your personal preferences. ❖ The 2D to 3D conversion function is meant for enjoyment of 2D home video, and other 2D content you create, in 3D according ...
Page 77 - The 3D button operation; Depending on the input mode, the
Basic features 77 The 3D button operation Depending on the input mode, the 3D button function may be different when viewing Native mode. Input: Function: Analog Broadcast Changes the viewing mode to 2D to 3D mode. Digital Broadcast Displays the selection window. Analog Inputs Changes the viewing mod...
Page 78 - Switching to 3D mode; Input Signal/Switching Display Mode Trigger; Selecting 3D format from the Quick menu in 3D mode
78 Basic features Using 3D functions Switching to 3D mode ❖ Set 3D Auto Start to 3D . ❖ Press the 3D button and select 3D while viewing 2D mode or Native mode. Input Signal/Switching Display Mode Trigger Press 3D Button Type Additional Information Format Source Signal Select 3D Select 2D to 3D 3D Fo...
Page 79 - Switching to 2D mode; Set; D Auto Start; to
Basic features 79 Input Signal/Switching Display Mode Trigger Quick menu/ 3D Format Select Type Additional Information Format Source Signal SBS TAB 3D Format Signal With 3D Auto Detect Information FP SBS TAB Without 3D Auto Detect Information SBS TAB 2D Format Signal * Correct 3D image. Switching to...
Page 80 - Selecting 2D format from the Quick menu in 2D mode; Input Signal/Switching Display Mode Trigger Quick menu/; Switching to Native mode
80 Basic features Selecting 2D format from the Quick menu in 2D mode 1 Press the QUICK button. 2 Select 3D Settings > 2D Format Select . 3 Press the OK button. 4 Press the t / u (arrow) buttons to select Side by Side or Top and Bottom . Input Signal/Switching Display Mode Trigger Quick menu/ 2D F...
Page 81 - Setting the auto start mode
Basic features 81 Quick menu in 2D mode 1 Press the QUICK button. 2 Select 3D Settings > 2D Format Select and press the OK button. 3 Press t / u (arrow) buttons to select Native . To switch 2D to 3D mode ❖ Press the 3D button and select 2D to 3D while viewing 2D or Native mode. NOTE When using AT...
Page 82 - Change or delete your PIN code; The PIN code cannot be set to “0000.”; Forgotten PIN codes
82 Basic features Change or delete your PIN code 1 Press the SETUP button. 2 Select 3D > 3D PIN . 3 Press the OK button. 4 Press the number buttons to enter your 4-digit PIN code. 5 Select Change PIN or Delete PIN , and then press the OK button. NOTE ❖ The PIN code cannot be set to “0000.” ❖ If P...
Page 83 - Setting the 3D Timer Lock; dialogue box for Enable 3D Timer even if 3D Timer Lock is activated.; Setting the Enable 3D Timer
Basic features 83 4 Enter your 4-digit 3D PIN code. 5 Press the p / q (arrow) buttons to select 3D Lock and press the OK button. 6 Press the p / q (arrow) buttons to select On . Setting the 3D Timer Lock When the 3D Timer Lock feature is set to On, the PIN input window and the 3D start message will ...
Page 84 - Displaying 3D Important Information
84 Basic features Displaying 3D Important Information 1 Press the SETUP button. 2 Select 3D > 3D Important Info . Read through the information. 3 Press the t / u (arrow) buttons to select Yes or No and press the OK button. Adjusting 2D to 3D depth With this feature, you can adjust the level of 3D...
Page 85 - Tuning Channels; Tuning to the next programmed channel; Using Channel Return; Select the first channel you want to view.; Selecting the video input to view; Inputs
Basic features 85 Tuning Channels Tuning to the next programmed channel Press the CH p / q buttons on the remote control or TV control panel. Tuning to a specific channel (programmed or unprogrammed) Channel: Description: Analog Use the 0–9 buttons on the remote control. (For example, to select chan...
Page 86 - “Labeling video inputs” on page; INPUT; “Labeling video inputs” on page 72; Using closed captions
86 Basic features NOTE ❖ You can label the video input sources according to the specific devices you have connected to the TV, see “Labeling video inputs” on page 72 . ❖ You can skip sources, see “Skipping video inputs” on page 71 . ❖ Inputs that are set to be skipped will be skipped when selecting ...
Page 87 - Analog CC mode; Captions; captions will be displayed.
Basic features 87 Analog CC mode The closed caption mode has two options: Mode: Description: Captions Displays the dialogue, narration, and sound effects of TV programs and videos that are closed captioned (usually marked “CC” in program guides). Text Displays information not related to the current ...
Page 88 - Digital CC settings
88 Basic features NOTE If text is not available in your area, a black rectangle may appear on the screen. You can remove this rectangle by setting Closed Captions Display to Off. NOTE A closed caption signal may not be displayed when a videotape is dubbed, signal reception is weak, or signal recepti...
Page 89 - Using the Closed Caption button; Entering a new PIN code; Use the number buttons to enter a 4-digit number, and then confirm; Changing or deleting your PIN code; The PIN code cannot be set to “0000”.
Basic features 89 Using the Closed Caption button If you press the CC button when an analog channel is tuned or from an external input (480i signal from the video input): ❖ The CC bar will appear and will display the options, CC1-4, T1-4. If you press the CC button when a digital channel is tuned: ❖...
Page 90 - Forgotten PIN code; Using parental controls; This feature will not be available if no PIN code is set.
90 Basic features Forgotten PIN code 1 Press the SETUP button. 2 Select Options > Parental PIN Setup . 3 Press the OK button. 4 Press the INFO button 4 times quickly. 5 Select Change PIN and press the OK button. 6 Enter a new PIN code. Using parental controls Blocking TV programs and movies by ra...
Page 91 - Downloading an additional rating system
Basic features 91 Downloading an additional rating system An additional rating system may be available for use in selectively blocking TV programs and movies. NOTE The currently tuned station must be receiving a digital signal before an additional rating system can be downloaded. 1 Press the SETUP b...
Page 92 - Rating system; Independent rating system for broadcasters:
92 Basic features ❖ The additional rating system is an evolving technology; therefore, availability, content, and format may vary. Rating system Independent rating system for broadcasters: Ratings: Description and Content themes: TV-MA Mature Audience Only (This program is specifically designed to b...
Page 93 - If you place an “X” in the box next to “Rated “None””, programs rated “None”; Displaying ratings; Locking specific channels; code is entered first, see; “Setting the PIN code”
Basic features 93 NOTE If you place an “X” in the box next to “Rated “None””, programs rated “None” or “Not Rated” will be blocked; Programs that do not provide any rating information will not be blocked. Displaying ratings To display the rating of the program you are watching, press the INFO button...
Page 94 - Locking video inputs; “Locking video inputs” on page 94; “Locking video; Locking the control panel
94 Basic features Locking video inputs You can lock video inputs. You cannot view the input sources until you unlock the inputs by entering the PIN code. 1 Press the SETUP button. 2 Select Options > Parental Control and Locks . 3 Press the OK button. 4 Enter your 4-digit PIN code. 5 Press the p /...
Page 95 - Using HDMI; To set HDMI
Basic features 95 Using HDMI ™ CEC Control changed accidentally (by children, for example). When Panel Lock is set to On , none of the controls on the control panel operate except POWER . 1 Press the SETUP button. 2 Select Options > Panel Lock and press the OK button. 3 Press the p / q (arrow) bu...
Page 96 - Controlling HDMI
96 Basic features NOTE These functions depend on the connected devices. Controlling HDMI ™ CEC playback devices With your TV’s remote control, you can control the connected HDMI ™ CEC playback device (DVD player, etc.) you are watching. Button: Description: u Begins playback v Stops playback W Pause...
Page 97 - amplifier) is connected to the HDMI; Adjusting the amplifier’s audio
Basic features 97 NOTE These functions depend on the connected devices. The HDMI ™ CEC Device Control item is not available under the following conditions: ❖ A non-HDMI ™ input is selected ❖ The Enable HDMI CEC Control item is set to Off ❖ The connected HDMI ™ CEC device is not a playback, recording...
Page 98 - Other HDMI; Amplifier Control; Viewing the HDMI
98 Basic features Other HDMI ™ CEC Control functions When Enable HDMI CEC Control and all items in the HDMI ™ CEC Control Setup menu are set to On , the following functions will be enabled: Item: Description: TV Auto Power If an HDMI ™ CEC device is turned on, the TV turns on automatically. Auto Sta...
Page 99 - Adjusting the image; “Selecting the video input to view” on; Adjustment Range; To reset the PC Settings:; Using your computer with the TV
Basic features 99 Using your computer with the TV Adjusting the image If the edges of the picture are hidden, readjust Horizontal Position and Vertical Position. If the picture is affected by interference, readjust Clock Phase and Sampling Clock. 1 Select PC input mode , see “Selecting the video inp...
Page 100 - Setting the computer audio; If the; Enable On Timer; is set to; Off; Setting the timer to turn on the TV
100 Basic features Setting the computer audio You can output sound from your computer when connecting it to your TV, using the AUDIO IN terminal and PC audio cable. 1 Press the SETUP button. 2 Select Options > Input Options and press the OK button. 3 Press the p / q (arrow) buttons to select PC/H...
Page 101 - Setting the sleep timer; You can set the TV to turn off after a specific amount of time
Basic features 101 Item: Description: Input Video input source Channel Channel to view Volume Volume level Time until Power On Desired length of time until the TV turns on: minimum=00:10, maximum=12:00Press the t / u (arrow) buttons Use the number buttons 5 Select Done , and then press the OK button...
Page 102 - If a power failure occurs, the sleep timer setting may be cleared.; Sleep Timer; Setting No Signal Power Down; Default setting for each input is On.
102 Basic features NOTE If a power failure occurs, the sleep timer setting may be cleared. To display the time remaining until the TV turns off, press the SLEEP button.To cancel the sleep timer, press the SLEEP button repeatedly or press the p / q (arrow) buttons until it is set to 0 minutes. NOTE W...
Page 103 - Setting TV Power On Control; Depending on the device connected to the home network, it may take a
Basic features 103 Setting TV Power On Control When the TV is connected to the home network via Wireless LAN with the TV Power On Control in Enabled , your TV can be turned on by control from Apps. 1 Press the SETUP button. 2 Select Options > Power Management > TV Power On Control and press th...
Page 104 - Displaying TV status information
104 Basic features Displaying TV status information To display TV status information, press INFO . The following information will be displayed (if applicable): ❖ Current input ( ANT/CABLE , Video , etc.) ❖ Either “CABLE” (for cable TV) or “ANT” (for over-the-air broadcasts), if ANT/CABLE is the curr...
Page 105 - A confirmation screen appears.; Power failure; Resetting to Factory Defaults
Basic features 105 Resetting to Factory Defaults You can reset all settings and channels to Factory Defaults. 1 Press the SETUP button. 2 Select Installation > Reset TV . 3 Enter your PIN code (if a PIN code has been set). A confirmation screen appears. 4 Select Yes , and then press the OK button...
Page 106 - Selecting the picture size; “Scrolling the picture” on page 111; Chapter 7
106 Picture and Sound Controls Selecting the picture size You can view many program formats in several picture sizes— Native, 4:3, Full, TheaterWide 1, TheaterWide 2, TheaterWide 3, Normal, Quad FHD, 4K Native, 4K Normal, and 4K Full. NOTE v The picture size illustrations are examples only. The form...
Page 107 - does not; Native ModeTM; This mode is supported only for HDMI
Picture and Sound Controls 107 You can save separate picture size preferences for each input on your TV. To select the picture size using the Quick menu: 1 Press the QUICK button to open the Quick menu. 2 Select Picture Size , and then press the OK button. 3 Press the p / q (arrow) buttons to select...
Page 108 - Picture and Sound Controls; Full; TheaterWide1; This setting is for viewing in 4:3 format programs.
108 Picture and Sound Controls 4:3 (Sample Illustration) Picture size - 4:3 Some program formats will display with sidebars and/or bars at the top and bottom. Full This setting is for viewing in the 16:9 (480i, 480p) source programs only. (Sample Illustration) Picture size - Full 16:9 If receiving a...
Page 109 - TheaterWide2; subtitles; Normal
Picture and Sound Controls 109 TheaterWide2 This setting is for viewing letter box programs. A B C D E F G - - - - - - - - - - - - - - - - (Sample Illustration) Picture size - TheaterWide2, letter box The picture’s top and bottom edges may be hidden*. TheaterWide3 This setting is for viewing letter ...
Page 110 - “Scrolling; K Native; preventing any scaling.
110 Picture and Sound Controls format, the picture appears with sidebars and/or bars at the top and bottom, for example, SVGA input source.* To view the hidden areas (such as subtitles or captions), see “Scrolling the picture” on page 111 . 4K Native This setting will show the picture (3840 pixel x ...
Page 111 - Scrolling the picture; You can adjust the picture position when the picture size is set to; Using the Auto Aspect feature; The auto aspect ratio feature is not applicable to the PC input.; Using the 4:3 Stretch; This feature is available when Auto Aspect is set to On.
Picture and Sound Controls 111 Scrolling the picture Scrolling the picture If the edges of the picture are hidden, you can adjust the image’s position. NOTE v You can adjust the picture position when the picture size is set to TheaterWide2 or TheaterWide3. v When viewing Cloud TV, MediaShare or Inte...
Page 112 - Adjusting the picture; Selecting the picture mode
112 Picture and Sound Controls 2 Select Picture > Display Settings > 4:3 Stretch and press the OK button. 3 Press the p / q (arrow) buttons to select On . 4 Press the EXIT button. Adjusting the picture Selecting the picture mode You can select your desired picture settings from the modes descr...
Page 113 - Adjusting the picture quality; Selection
Picture and Sound Controls 113 Adjusting the picture quality The adjustments you make to picture quality under a picture mode are saved to that picture mode. Selection Press ( t ) Press ( u ) Backlight* Darker Lighter Contrast Lower Higher Brightness Darker Lighter Color Paler Deeper Tint Reddish Gr...
Page 114 - adjustment when the picture mode is set to AutoView.; If the picture mode is set to; AutoView; This feature may not work properly depending on the content.; Dynamic Contrast; Using the advanced picture settings features
114 Picture and Sound Controls Using the advanced picture settings features NOTE Some of the Advanced Picture Settings features will not be available for adjustment when the picture mode is set to AutoView. Resolution+ If the Resolution+ set to On (this is the default), the clarity levels can be adj...
Page 115 - ClearScan; or; MPEG NR; Game; or; DNR
Picture and Sound Controls 115 press the OK button. 3 Press the p / q (arrow) buttons to select On or Off . 4 Press the EXIT button. ClearScan ® ClearScan ® 240Hz uses both frame interpolation technology and advanced backlight control with image synchronization to quadruple the TV refresh rate for a...
Page 116 - Ambient Light Sensor; When the picture mode is set to; , this feature is automatically; On; ColorMasterTM
116 Picture and Sound Controls and press the OK button. 3 Press the p / q (arrow) buttons to select DNR and press the OK button. 4 Press the p / q (arrow) buttons to select Low , Middle , High , Auto , or Off . 5 Press the EXIT button. NOTE The differences may not always be noticeable. For the best ...
Page 117 - Base Color Adjustment; This feature is not available in Standard and Movie mode.
Picture and Sound Controls 117 Base Color Adjustment When ColorMaster™ is set to On , the list of base colors appears. You can select a base color to adjust. 1 Press the SETUP button. 2 Select Picture > Advanced Picture Settings > Base Color Adjustment . 3 Press the OK button. The Base Color A...
Page 118 - Fine Texture Restoration; This feature allows you to adjust fine texture of the picture.; Brilliance Restoration; This feature should normally be set to Auto.; D Judder Cancellation; This feature will reduce 3D images blur without adding flicker.; When Picture Mode is set to Game, this feature will be grayed out and
118 Picture and Sound Controls Fine Texture Restoration This feature allows you to adjust fine texture of the picture. 1 Press the SETUP button. 2 Select Picture > Advanced Picture Settings > Fine Texture Restoration. 3 Press the OK button. Fine Texture Restoration screen appears. 4 Press the ...
Page 119 - Resetting to the factory default; Press the
Picture and Sound Controls 119 Resetting to the factory default 1 Press the SETUP button. 2 Select Picture > Advanced Picture Settings > Reset . 3 Press the OK button. A confirmation screen appears. 4 Select Yes , and then press the OK button. Using the advanced picture settings features
Page 120 - Setting the expert picture settings; This feature is only available in Standard and Movie mode.; Test Pattern; RGB Filter; It is not possible to turn off all three colors simultaneously.
120 Picture and Sound Controls Setting the expert picture settings NOTE This feature is only available in Standard and Movie mode. Test Pattern When the test pattern is on screen, you can navigate the Picture submenus without removing the image. When you move to a non-Picture menu, or close the menu...
Page 121 - White Balance
Picture and Sound Controls 121 White Balance Window Display This feature displays the Window Pattern to adjust the white balance. 1 Press the SETUP button. 2 Select Picture > Expert Picture Settings > White Balance and press the OK button. 3 Press the p / q (arrow) buttons to select Window Dis...
Page 122 - Muting the sound; If you modify items in the; Sound; menu while Mute is active, Mute is; Selecting stereo/SAP broadcasts; If the sound is noisy, select; Mono; If there is no sound in; SAP; Adjusting the audio balance; Adjusting the audio
122 Picture and Sound Controls Adjusting the audio Muting the sound Press the MUTE button to partially reduce (1/2 Mute) or turn off (Mute) the sound. Each time you press the MUTE button, the mute mode changes in the following order: 1/2 Mute, Mute, Volume, 1/2 Mute, etc. NOTE If you modify items in...
Page 123 - Setting the Primary Audio Language
Picture and Sound Controls 123 3 Press the OK button. 4 Press the t / u (arrow) buttons to adjust the range. 5 Press the EXIT button. TV Speakers On/Off This feature allows you to turn the TV speakers off when connecting the audio system. 1 Press the SETUP button. 2 Select Sound > TV Speakers and...
Page 124 - Delay Adjustment; Auto; Using the Dolby
124 Picture and Sound Controls Adjusting the audio 3 Press the p / q (arrow) buttons to select Auto or Manual . Auto: This mode automatically adjusts the audio timing to meet the video timing. The time lag might be large between the image and sound depending on the connected equipment (amplifier etc...
Page 125 - Audyssey Premium TelevisionTM
Picture and Sound Controls 125 NOTE This feature is available when Dolby ® Digital or Dolby ® Digital Plus is input to the TV in the following situations: v When tuned to a digital RF channel v When an HDMI ™ input is used This feature is automatically set to Off when Dynamic Volume (Audyssey Dynami...
Page 126 - Using Audyssey Dynamic Volume; If; Dynamic Range Control; Audyssey ABXTM
126 Picture and Sound Controls Using Audyssey Dynamic Volume ® This feature provides a consistent sound volume between television programs, commercials, and between the loud and soft passages of movies. 1 Press the SETUP button. 2 Select Sound > Audyssey Premium Television > Dynamic Volume and...
Page 127 - Advanced features; Using your home network; feature. In order to do this, you will have to configure the network; Chapter 8
127 Advanced features Using your home network ❖ This TV can share videos, music, and photos across your home network and other connected products through the MediaShare feature. In order to do this, you will have to configure the network settings on your TV, see “MediaShare (Videos, Music, and Photo...
Page 128 - When using a Wireless network connection; identified as harmful.; Using the TV in a wireless LAN environment:; for audio and SD video streaming.
128 Advanced features When using a Wireless network connection Wireless LAN and your Health: Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. However, the level of energy emitted by Wireless LAN devices is much less than the electromagnetic energy emitted...
Page 129 - “Advanced Network Setup” on page; Wireless Setup; Assisted Setup (setup using the AP's notification information); Setting up the Network
Advanced features 129 Setting up the Network You can select the Network Type. 1 Press the SETUP button. 2 Select Network > Network Setup > Connection Type and press the OK button. 3 Press the p / q (arrow) buttons to select Wired or Wireless . 4 Press the OK button. ❖ If you select Wired , see...
Page 130 - Easy Setup using PBC (Push button configuration)
130 Advanced features Easy Setup using PBC (Push button configuration) 1 Press the SETUP button. 2 Select Network > Network Setup > Wireless Setup and press the OK button 3 Press the p / q (arrow) buttons to select Easy Setup and press the OK button. 4 Press the p / q (arrow) buttons to select...
Page 131 - Assisted Setup; “Using the software keyboard” on page 137; The Security Key must adhere to the following conditions:; Settings are not saved if the; BACK; button is pressed before Done is; Manual Setup
Advanced features 131 To cancel searching for the AP: ❖ Press the BACK button while searching for the AP. A message appears. Press the t / u (arrow) buttons to select Yes , and then press the OK button. Assisted Setup 1 Press the SETUP button. 2 Select Network > Network Setup > Wireless Setup ...
Page 132 - When Authentication is Open System and Shared Key, only WEP or; This item is grayed out when Encryption is set to None.
132 Advanced features Setting up the Network 4 Press the p / q (arrow) buttons to select Network Name , and then press the OK button. The Software Keyboard window appears. 5 Input the Network Name using the Software Keyboard. For more information, see “Using the software keyboard” on page 137 . 6 To...
Page 133 - Wireless Information; The settings configured in Wireless Setup can be confirmed.
Advanced features 133 NOTE Settings are not saved if the BACK button is pressed before Done is selected. Wireless Information The settings configured in Wireless Setup can be confirmed. 1 Press the QUICK button. 2 Select Wireless Information , and then press the OK button. 3 Press the RED button to ...
Page 134 - Advanced Network Setup; IP Address Setup; field and
134 Advanced features Advanced Network Setup NOTE When manually setting the IP Address, set Auto Setup to Off . IP Address Setup NOTE The settings in Auto Setup are linked to those selected in the DNS Setup menu. If Auto Setup is set to On, then Auto Setup in the DNS Setup menu will also be set to O...
Page 135 - DNS Setup
Advanced features 135 NOTE IP address field numbers must be between 0 and 255. If you input an incompatible number and press the OK button, the field number will be reset to the previous value. 8 Press the p / q (arrow) buttons to highlight Subnet Mask , and edit in the same way as IP Address. 9 Pre...
Page 136 - (arrow) buttons to select the field you want to; DNS address field numbers must be between 0 and 255. If you input an; button, the field number will be; MAC Address; You can view the fixed MAC address for the TV.; Network Connection Test
136 Advanced features 3 Press the p / q (arrow) buttons to select DNS Setup , and then press the OK button. 4 Press the p / q (arrow) buttons to select Auto Setup and press the OK button. 5 Press the p / q (arrow) buttons to select Off . 6 Press the p / q (arrow) buttons to select Primary DNS Addres...
Page 137 - button on a field that accepts character input.; Using the software keyboard
Advanced features 137 Using the software keyboard You can enter text using the Software Keyboard.The Software Keyboard window will appear when you press the OK button on a field that accepts character input. NOTE When using the SmartTV features, software keyboard availability depends on the Internet...
Page 138 - Enter text using the software keyboard
138 Advanced features Enter text using the software keyboard 1 Highlight the desired character on the on-screen software keyboard. 2 Press the OK button. 3 Repeat Step 1 and 2 until you have entered all desired text. 4 Select Done or press the GREEN button to save your settings and return to the pre...
Page 139 - An Internet connection is required.; You will not be able to use the TV set while performing the upgrade.; If the network is not available, a warning message appears.; Viewing the Software Licenses; Performing a Software Upgrade
Advanced features 139 Performing a Software Upgrade TOSHIBA may offer upgrades for the TV's software in the future.The TV's software is upgraded via the Network. NOTE An Internet connection is required. Before downloading software: 1 Configure your TV to connect to the Internet. NOTE ❖ You will not ...
Page 140 - Connecting your PC to the TV the first time; When selecting the Toshiba TV for the first time, a 4-digit or 8-digit; Using Intel
140 Advanced features Using Intel ® WiDi Intel ® Wireless Display (Intel ® WiDi) is supported on this TV. Toshiba has also included peer-to-peer wireless technologies to allow direct wireless connection between the TV and Intel ® WiDi equipped PC or mobile device. If your PC or mobile device has Int...
Page 141 - If the device has been inactive for some time, the Intel; Changing the Intel; Using the Cloud Service
Advanced features 141 NOTE If the device has been inactive for some time, the Intel ® WiDi connection will be disconnected automatically. Changing the Intel ® WiDi Device Name The TV's Intel ® WiDi device name can be changed. 1 Press the SETUP button. 2 Select Network > Network Device Setup > ...
Page 142 - “Setting; “Setting up the Network” on page 129; eMANUAL; Using the Cloud TV Service features
142 Advanced features NOTE You need to connect to the Internet before using this feature, see “Setting up the Network” on page 129 . 1 Press the button. The menu screen of the Cloud TV service is displayed. 2 Press the p / q / t / u to select a Cloud TV service, and press the OK button. Using the Cl...
Page 143 - Feature apps; the things you love— like Netflix; Netflix; on the remote control and select the Netflix; To close Netflix; The Netflix ESN screen appears.; Netflix Setup
Advanced features 143 Feature apps With easier content discovery, Cloud TV puts you closer than ever to the things you love— like Netflix ® and Hulu Plus ® , along with video on demand, broadcast programming, the Web, even music, photos and videos on your home network. NOTE Apps will vary by country...
Page 144 - VUDU; HD Movies and VUDU; Apps; offers high definition movies on the Web and much more.; Use of VUDUTM requires a working broadband Internet connection (1; Internet
144 Advanced features 3 Press the p / q (arrow) buttons to select Deactivation , and then press the OK button. 4 Press the t / u (arrow) buttons to select Yes , and then press the OK button. VUDU TM HD Movies and VUDU TM Apps VUDU™ HD Movies and VUDU TM Apps offer on-demand service that offers high ...
Page 145 - Using the Cloud TV Service features; Using the web browser; button when finished.; When you press the; GREEN; button while browsing web content, you; Browsing favorite websites; STAR
Advanced features 145 Using the Cloud TV Service features ❖ uses a single built-in font. Some text may not be displayed as intended. ❖ does not support downloading of files or fonts. ❖ is a TV browser. It may work differently than PC browsers. ❖ does not support parental control or locks in the cont...
Page 146 - Adding favorite websites; “Using the web browser” on page 145
146 Advanced features 4 Select the item or folders to move to the desired URL address and press the OK button. NOTE You can press the GREEN button on the remote for thumbnail view of all your favorites. 5 You can now browse websites on your TV using the p / q / t / u (arrow) buttons on the remote co...
Page 147 - Using SkypeTM
Advanced features 147 PIP (Picture-in-picture) function When viewing the web browser page, currently airing programs or images from external inputs can be displayed in a PIP window (sub-screen). 1 Press the RED button while viewing the web browser page. The currently airing program or images from ex...
Page 148 - Getting started; Press the button on the remote control.; Skype; and press the; “Welcome to Skype” screen appears.
148 Advanced features ❖ The sound settings are switched to Skype™ mode. ❖ If you cannot hear the person you're speaking with, check your TV volume. ❖ When Optical Digital output or Analog output is used and you are signed in, the ring tone may not sound. ❖ The volume level on Skype™ may differ from ...
Page 149 - To create a new account:
Advanced features 149 Welcome to Skype Skype Name Password Press [OK] Press [OK] Sign in when Skype starts Sign in Create Account Start Skype when TV starts (Sample Image) Welcome Skype screen 3 Select Sign in or Create Account . To create a new account: If you do not already have a Skype™ account, ...
Page 150 - required in case you lose or forget your password.; Basic Operation; Contact name / Current online status / Profile picture / Mood message; contact list menu
150 Advanced features NOTE ❖ Please ensure that you have entered your email address correctly. It is required in case you lose or forget your password. ❖ If you forget your password, visit skype.com to retrieve it. ❖ If a message appears informing you that the entered Skype™ name is already register...
Page 151 - Contacts; button on each contact, the following functions; contact list - select menu; Video or Voice call; Video call; your screen will now display your call as shown below.; video/voice call screen
Advanced features 151 Contacts/People Press the p / q (arrow) buttons to select Contacts tab. Press the c / p / q (arrow) buttons to select a contact.After pressing the OK button on each contact, the following functions will be displayed: Name Contact List Name Name TextTextTextTextTextTextTextTextT...
Page 152 - Group calls; Incoming call; Volume; incoming call menu; Video
152 Advanced features Below is all icon pictures in conversation window. Start video Stop video Resume the call Unmute the webcam mic Mute the webcam mic Normal size video Full screen video Open dial pad End call ( Hang up the call ) Group calls Using your Toshiba TV, you can join Skype™ group voice...
Page 153 - Status; status menu; Add Contact; Add Contact Type menu
Advanced features 153 Status When pressing the GREEN button, the change status window is displayed as below. You can change your status by pressing the p / q (arrow) buttons and then pressing the OK button. Exit by pressing the BACK button. Name Contact List Name Name TextTextTextTextTextTextTextTex...
Page 154 - contact search results screen; Notification of authorization request; notification of authorization request screen; request form screen
154 Advanced features Contact Search Results Back Full Name Skype Name Country Aaaaaa_0101 Aaaaaa_0101 USA Bbbbbb007 Bbbbbb007 UK Cccccc0709 Cccccc A01 UK Ddddddd Ddddddd Ddd USA Eeeeee_Eeee EE_Eeeee Japan Ffffffffff_Fu Ffffffffff_Ff USA Gggggg_Ggg Gggggg_Ggg Japan Add a Skype contact Search Result:...
Page 155 - Recent; (arrow) buttons to select an item and press the; history screen; Each call has an icon with it. The meaning of each icon is as follows:; Dialer
Advanced features 155 Hello! Please add me to your Contacts. ms_audi Block Decline Accept (Sample Image) Skype TM request form screen Recent You can see a list of past events in “Recent”.Press the p / q (arrow) buttons to select the Recent tab. Press the c / p / q (arrow) buttons to select an item a...
Page 156 - dialer screen; Settings; User Profile
156 Advanced features Name Dialer Please input the country code -Select One- TaiwanTajikistanTanzaniaThailandTimor-LesteTogo +886+992+255+66+670+228 - TextTextTextTextTextTextTextTextTextTextTextTextSkype Credit Exit Add Contact Status (Sample Image) Skype TM dialer screen Select the country or regi...
Page 157 - For more information, see; button is not available while using the MediaShare; MediaShare specifications
Advanced features 157 The volume of your speakers will be different on Skype™ compared to your normal TV volume level. The speaker volume range is 0 - 100% by 1 steps, and ringtone volume is 0 - 100% by 25 steps. ❖ Privacy Settings Set who you allow calls from, whether it's Anyone or People in my Co...
Page 158 - Connectivity is not guaranteed for all devices.; You must obtain any required permission from copyright owners to; Basic operation
158 Advanced features NOTE ❖ Connectivity is not guaranteed for all devices. ❖ Some functionality may be lost with a USB HUB connection. Supported file system: ❖ FAT16 and FAT32 (USB device, SD and SDHC memory card) ❖ FAT16, FAT32 and exFAT (SDXC memory card) NOTE You must obtain any required permis...
Page 159 - Manual Start; Sorting may take a little time.; To close the MediaShare
Advanced features 159 NOTE If Auto Start is set to Off, you can start the MediaShare (Media Player) manually. Manual Start 1 Insert a USB device into the USB port, or insert an SD card into the SD card slot. 2 Press the MEDIA SHARE button. 3 To change the device, press the p / q / t / u (arrow) butt...
Page 160 - Using MediaShare with a Media Server; You need to configure a home network before using this feature, see; To select a file in the list of contents
160 Advanced features Using MediaShare with a Media Server You need to configure a home network before using this feature, see “Setting up the Network” on page 129 . 1 Press the MEDIA SHARE button. 2 To change the device press the p / q / t / u (arrow) buttons to select the Device Name button on the...
Page 161 - Viewing movie files; “To select a file in the list of contents” on page 159; If playback finishes before the; Resume Playback; If the same file is selected and played, playback will resume from; To pause playback
Advanced features 161 Viewing movie files Basic Playback 1 Select a file, see “To select a file in the list of contents” on page 159 . 2 Press the OK button or PLAY button to begin playback. NOTE ❖ Depending on the file size, it may take some time to start playback. ❖ Depending on the images, the 3D...
Page 162 - To locate a specific file; access the desired file.; To play in fast reverse or fast forward directions; CC; To set the repeat mode; To select a movie from Play List (except for Media Renderer
162 Advanced features To locate a specific file ❖ Press the Skip Reverse or Skip Forward button repeatedly to access the desired file. ❖ ( Z ): Playback starts from the beginning of the current file or previous file. ❖ ( z ): To locate subsequent files. To play in fast reverse or fast forward direct...
Page 163 - To register your TV to a DivX; This TV allows you to play back files purchased or rented from DivX; To unregister your device:; A confirmation message will appear. Select
Advanced features 163 The information will be displayed at the bottom of the screen. 2 Press the INFO button again to hide the information. NOTE The information may not correctly display depending on the content or media server. To register your TV to a DivX ® account: This TV allows you to play bac...
Page 164 - DivX Certified; To playback DivX Plus; confirmation message will appear. If; Yes; Depending on the content data will not be operated.
164 Advanced features ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified ® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to c...
Page 165 - Using Multi Title and Alternative Timelines Multi Title; HD files may contain up to 100 titles.; RED; Maximum number of files:
Advanced features 165 Using Multi Title and Alternative Timelines Multi Title DivX Plus ® HD files may contain up to 100 titles. You can change the title (It contains same video file) by pressing the RED button.When the RED button is pressed, it will display the title change window at the bottom on ...
Page 166 - Playing music files; Depending on the file size, it may take some time to start playback.; The; PAUSE; button or operations during Pause may not be functional; to access the desired file.
166 Advanced features NOTE It may not be possible to use certain playback or display some files. In some cases certain files and servers may not support playback features, such as pause. Playing music files Basic Playback 1 Select a file, see “To select a file in the list of contents” on page 159 . ...
Page 167 - To select a music from Play List (except for Media Renderer
Advanced features 167 To set the repeat mode 1 Press the QUICK button. 2 Press the p / q (arrow) buttons to select the Repeat . The current repeat setting appears. 3 Press the t / u (arrow) buttons to select Off , All , or 1 . 4 Press the BACK button. The setting is effective until the TV is turned ...
Page 168 - Viewing photo files; If all of the photos will not fit in one screen, when pressing the; Displaying thumbnail data may take time.; Single View mode; In this view mode, only files located in the selected directory are
168 Advanced features ❖ File format: MP3, MP4 (AAC), WMA9 std, LPCM ❖ Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz ❖ Bit rate: From 32 to 320 kbps ❖ Maximum number of files: 1000 per folder NOTE It may not be possible to use certain playback features or display some files. In some cases certain file...
Page 169 - Slide Show mode; only files located in the selected directory appear.; Mode settings; The music file in the same folder as the displayed photo will start
Advanced features 169 NOTE Single view mode is changed to Multi View mode when the BACK button is pressed. Slide Show mode This view allows you to watch a slide show of the photos. In this mode, only files located in the selected directory appear. 1 To switch to Slide Show mode, press the OK button ...
Page 170 - Rotate the image; media server. Certain processes may take some time to complete.
170 Advanced features Rotate the image While viewing the image in Single View mode or Slide Show mode, press the p / q (arrow) buttons to rotate the image 90 degrees. To select a photo from Play List (except for Media Renderer function) While in the Single View mode or Slide Show mode, you can selec...
Page 171 - Search; Folders are not subject to the search function.; The search retrieval stops when content is being played.
Advanced features 171 Using the Cloud TV Service features Search To search for content, 1 Select the search. 2 Enter in keyword and the search will search for: ❖ Media Server Videos; Title name Music; Title name/Artist name/ Album name Photos; Title name ❖ USB/SD card Videos/Music/Photos; File name ...
Page 172 - Network Device Setup; External Control Setup; To access the Home Control Profile:; The Home Control Profile window will appear.; Setting up the Media Renderer feature; The TV can be configured as a Media Renderer. When operating as a
172 Advanced features Network Device Setup Network Device Setup In order to set the access the External Control Setup , Media Renderer Setup , or Device Name Setup , you must use the Network Device Setup menu. External Control Setup 1 Press the SETUP button. 2 Select Network > Network Device Setu...
Page 173 - Device Name setup; The maximum number of characters allowed for the device name is 15.
Advanced features 173 3 Press the p / q (arrow) buttons to select On or Off , and then press the OK button. Device Name setup The device name as a Media Renderer can be changed. 1 Press the SETUP button. 2 Select Network > Network Device Setup > Device Name Setup and press the OK button. 3 Sel...
Page 174 - Using Apps on a Tablet or Smart phone; These apps are available for compatible Toshiba equipment using; and membership. Not all third-party services may be available on or; Chapter 9
174 Cloud TV Companion Apps Using Apps on a Tablet or Smart phone Toshiba provides apps for tablets and smart phones. The apps will vary by country and availability may change in the future with respect to current apps. NOTE Apps will vary by country and availability may change in the future on curr...
Page 175 - Apps Collaboration; To select the Apps Control Profile; The Apps Control Profile window will appear.; Apps Control Profile
Apps Collaboration 175 v Apps can only be used when your TV and your tablet or smart phone are connected to the Internet. v Some app features may require the TV and smart phone/tablet to be on the same home network connection. v Starting and operation of this service may take several minutes. v Soft...
Page 176 - Pairing; Pairing with external devices cannot be carried out when the TV is; Enable Control; is not set to; ON; in; External Control; , Apps functions including Pairing cannot be used.
176 Apps Collaboration To enable the New Device Detection: 1 Press the SETUP button. 2 Select Network > Network Device Setup > External Control Setup and press the OK button. 3 Press the p / q (arrow) buttons to select and set Apps Control Profile and press the OK button. The Apps Control Prof...
Page 177 - Troubleshooting; General troubleshooting; causes/solutions for the problem you are experiencing.; TV stops responding to controls.; function, simply unplug the TV from the AC outlet and plug it back in.
177 Troubleshooting General troubleshooting Before calling a service technician, review this chapter or visit the Toshiba Technical Support Website at "support.toshiba.com" for possible causes/solutions for the problem you are experiencing. Before you begin to troubleshoot any problem, first...
Page 178 - Ensure the power cord is plugged in properly, and then press the; Replace the batteries in the remote control, see; Picture problems; General picture problems.; Check the antenna/cable connections, see; on the remote control or on the TV and select a valid video
178 Troubleshooting Other problems. If your TV’s problem is not addressed in this Troubleshooting chapter or the recommended solution has not worked, use the Reset Factory Defaults procedure, see “Resetting to Factory Defaults” on page 105 . TV will not turn on. Check the AC wall outlet by trying an...
Page 179 - value to increase the sharpness level, see; Video Input Selection problems.; a second; Cannot view external signals.; “Locking video inputs” on; Poor display color or no color.; Poor composite picture.; “Connecting a computer” on page 43
Troubleshooting 179 If Resolution+ does not achieve a sharper picture, change the Sharpness value to increase the sharpness level, see “Resolution+” on page 114 . Video Input Selection problems. If the Input Selection window does not appear when you press INPUT on the remote control or the TV contro...
Page 180 - Sound problems; “Connecting a digital audio; MUTE; “Connecting a digital audio system” on page 38; Remote control problems; “Storing
180 Troubleshooting Sound problems Check the antenna/cable connections, see “Connecting a digital audio system” on page 38 . The station may be having broadcast difficulties. Try another channel. The sound may be muted. Press the VOL (+ -) buttons or MUTE button. If you are connected to a computer u...
Page 181 - “Using closed captions” on page 86; INFO; “Forgotten; Closed caption problems
Troubleshooting 181 Closed caption problems If the program or video you have selected is not closed captioned, no captions appear on the screen. If text is not available, a black rectangle may appear. If this happens, turn off the closed caption feature, see “Using closed captions” on page 86 . A cl...
Page 182 - Network problems; Cannot connect to the Internet.; are connected properly, see
182 Troubleshooting HDMI ™ problems HDMI ™ problems HDMI ™ cables. Ensure that HDMI ™ cables with the ( ® ) Logo are used, see “Connecting an HDMI™ or DVI device to the HDMI™ input” on page 39 . Network problems Cannot connect to the Internet. Check the modem and its incoming cable/telephone connect...
Page 183 - are on the same subnet.; Unstable network connection.; and then reconnect them.; The media server name is not displayed.; “Connecting the
Troubleshooting 183 Make sure the TV IP address is on the same subnet as the networked computer. ❖ Example of proper setup: The computer has the IP address 192.168.0.100 with the Subnet mask 255.255.255.0, the TV has the IP address 192.168.0.101 with the Subnet mask 255.255.255.0; both are on the sa...
Page 184 - Wireless network problems; “Network Connection Test” on page 136; MediaShare problems; application software may not be viewable.
184 Troubleshooting Wireless network problems Check that the router/AP (Access point) power is On.After starting wireless network setup, confirm that the network is configured properly by performing the network connection test, see “Network Connection Test” on page 136 . Check the router/AP’s connec...
Page 185 - For Connected MediaShare; Cloud TV Freezes on the TV screen.; Light Indicator; The power is Off or in Standby.; If the problem persists after trying the solutions; Cloud TV
Troubleshooting 185 For Connected MediaShare Depending on the media server, it may take time to display the list. Media Renderer Depending on the state of this TV, the Media Controller may not be able to control a Media Renderer playback.If Media Renderer playback starts regardless of the user's int...
Page 186 - Specifications; This model complies with the specifications listed below.; Television system; Appendix A
186 Specifications NOTE v This model complies with the specifications listed below. v Designs and specifications are subject to change without notice. v This model may not be compatible with features and/or specifications that may be added in the future. Television system NTSC standard ATSC standard...
Page 187 - ColorStream; Power consumption
Specifications 187 Power consumption 58L9300U 2.1 A (maximum current) 0.2 W in Standby mode 65L9300U 3.2 A (maximum current) 0.2 W in Standby mode 84L9300U 5.3 A (maximum current) 0.2 W in Standby mode Audio power 58L9300U 10 W + 10 W 65L9300U 10 W x 2 + 10 W x 2 84L9300U 10 W x 2 + 10 W x 2 Speaker...
Page 188 - Digital audio output; Optical type; PC input; Standard; Ethernet; SD, SDHC and SDXC memory card; Dimensions with table stand; Wireless connection
188 Specifications Digital audio output Optical type PC input 15-Pin D-sub Analog RGB Wireless connection Standard IEEE 802.11a/b/g/n/ Frequency Range 5.15-5.35 GHz, 5.47-5.725 GHz, 5.725-5.850 GHz, 2.400–2.473 GHz Security WEP 64/128, TKIP, AES, WPA/WPA2-PSK, WPS, None Ethernet IEEE 802.3. USB Univ...
Page 189 - Operating conditions; be available in certain cases.
Specifications 189 Weight (mass) with stand 58L9300U 78.3 lbs (35.5 kg) 65L9300U 108.0 lbs (49.0 kg) 84L9300U 169.7 lbs (77.0 kg) Operating conditions Temperature 32º - 95º F (0º - 35º C) Humidity 20 - 80% (no moisture condensation) Supplied accessories v Universal remote control (2x AAA batteries) ...
Page 190 - PC IN signal formats; Format Resolution V. Frequency H. Frequency Pixel Clock
190 Specifications Acceptable signal formats for PC IN, and HDMI ™ , and 3D PC IN signal formats NOTE v The PC IN on this TV only accepts signal formats which are compliant with VESA-DMT as in the table below. Since some PCs input signals are different from the resolution and frequency described in ...
Page 192 - depending on its input source format.; K Video Support formats; Certain HDMI formats or still images exceeding “4K” resolution may
192 Specifications 3D Signal formats* Resolution Aspect ratio V. Frequency H. Frequency Pixel Clock Frequency 3D Structure 720 x 480p 16:9 59.940/60 Hz 31.469/31.500 kHz 54.000/54.054 MHz Side by Side (full) 27.000/27.027 MHz Side by Side (half)Top and Bottom 1280 x 720p 16:9 59.940/60 Hz 90.0/89.91...
Page 193 - Operating the TV with combination buttons; mode by pressing a combination button while holding down a color
Specifications 193 Operating the TV with combination buttons You can directly operate the TV power, input, picture size, and picture mode by pressing a combination button while holding down a color button. Button Color Combination Button Behavior/Mode RED INPUT Power Off POWER Power On 1 Input 1 2 I...
Page 194 - Setting the keyboard layout; the situation you are entering characters.; Appendix B
194 Wireless QWERTY keyboard with touchpad ❖ How to enter French or Spanish characters using the Wireless QWERTY keyboard with touchpad ❖ For how to use the Wireless QWERTY keyboard with touchpad, refer to the User's Guide that comes with the keyboard. Setting the keyboard layout Before entering Fre...
Page 197 - International Key table; To enter special characters, follow the table below:
197 International Key table To enter special characters, follow the table below: Diacritic press first (Dead key) press second Space E e A a O o U u Y y I i Z z R r Acute ' or ´ ' É é Á á Ó ó Ú ú Ý ý Í í Ź ź Ŕ ŕ Grave ` ` È è À à Ò ò Ù ù Ỳ ỳ Ì ì Umlaut Shift + ' (") ¨ Ë ë Ä ä Ö ö Ü ü Ÿ ÿ Ï ï Til...
Page 198 - Index; Numerics
198 Index Numerics 3D 2D from Quick menu 80 3D from Quick menu 78 3D lock 82 3D timer lock 83 adjusting 2D to 3D depth 84 auto start mode 81 button operation 77 change pin code 82 delete pin code 82 enable 3D timer 83 enter new pin code 81 forgotten pin code 82 functions 73 Native mode 80 selecting ...
Page 199 - locking specific channels 93
Index 199 Auto Aspect using 111 C cables 3.5mm to RCA Y-cable 31 analog RGB (15-pin) 31 coaxial (F-type) 29 component video (red/green/blue) 30 Dual-wand IR blaster cable 30 HDMI ™ 30 LAN 32 optical audio 31 overview of cables 29 standard A/V (red/white/yellow) 29 channel return 85 channels auto tun...
Page 200 - adjusting amplifier’s audio 97
200 Index F Factory Defaults reset 105 favorites adding 146 browsing 145 features 21 H HDMI ™ viewing signal information 98 HDMI ™ CEC adjusting amplifier’s audio 97 controlling playback devices 96 input source selection 97 other functions 97 HDMI ™ CEC Control using 95 HDMI ™ settings feature using...
Page 201 - configuring 72
Index 201 pin code changing 82 deleting 82 entering new pin code 81 forgotten 82 setting pin code 81 power failure 105 program ratings displaying 93 unlocking programs 93 Q quick setup channel tuning 60 country 58 IR Blaster 61 network 58 smart TV 59 store / home mode 58 time zone 58 R rating system...
Toshiba 26C100U
User Manual
Toshiba 55SL412U
User Manual
Toshiba 50L7300U
User Manual
Toshiba 50L5200U
User Manual
Toshiba 24V4210U
User Manual
Toshiba 55L7400U
User Manual
Toshiba 40L3400U
User Manual
Toshiba 50L1350U
User Manual
Toshiba 24SLV411U
User Manual
Toshiba 50L2400U
User Manual