Page 2 - PROPER TELEVISION PLACEMENT MATTERS
2 TOSHIBA CARES • Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. • As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the...
Page 3 - Safety Precautions; WARNING; WARNING; NOTE TO CATV INSTALLERS
3 Dear Customer, Thank you for purchasing this Toshiba LED TV. This document will help you use the many exciting features of your new LED TV. Before operating your LED TV, carefully read this document completely. Safety Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE...
Page 4 - Additional Safety Precautions
4 Installation, Care, and Service Installation Follow these recommendations and precautions and heed all warnings when installing your TV:19) WARNING: NEVER expose batteries to excessive heat such as sunshine, fire etc. 20) ALWAYS plug the product into an outlet that is located in such a manner that...
Page 6 - Choosing a location for your LED TV
6 carefully lay the front of the LCD Panel face down on a flat, cushioned surface such as a quilt or blanket. Leave the bottom of the unit protruding over the edge of the surface and assemble the pedestal as in the Quick Start Guide. Note: Extreme care should always be used when attaching the pedest...
Page 7 - FCC Declaration of Conformity; Important notes about your TV
7 CAUTION: Always place the TV on a sturdy, level, stable surface that can support the weight of the unit. To secure the TV, use a sturdy strap from the hook(s) on the rear of the TV to a wall stud, pillar, or other immovable structure. Make sure the strap is tight, secure, and parallel to the floor...
Page 8 - Trademark Information
8 • THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON- COMMERCIAL ACTIVIT...
Page 10 - Contents; HDMI
10 Contents Chapter 1: Introduction ...................................................18 Safety icons ............................................................... 18 Features .................................................................... 19 Overview of installation, setup, and use ...........
Page 12 - Tuning to a specific channel (programmed or
12 Contents Chapter 5: Setting up your TV .........................................63 How to navigate the menu ......................................... 63 Changing initial settings ...................................... 63 Individual settings ............................................... 63 Stori...
Page 14 - Using the Dolby
14 Contents Setting the expert picture settings ........................... 105 Test Pattern ....................................................... 105 RGB Filter .......................................................... 105 White Balance .................................................... 106 Ad...
Page 15 - Netflix
Contents 15 Using the Flip Bar features ...................................... 130 Setting up the Flip Bar ....................................... 130 Selecting programs using the Flip Bar ............... 132 Changing the Flip Bar settings ........................... 133 Resetting the Flip Bar setti...
Page 18 - Introduction; Safety icons; instructions as follows:; NOTE; Provides important information.; Chapter 1
18 Introduction Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons hig...
Page 19 - Features; “HDMI
Introduction 19 Features ❖ Integrated digital tuning (8VSB ATSC and QAM) — Eliminates the need for a separate digital converter set-top box (in most cases). ❖ 1920 x 1080 display resolution. ❖ Four HDMI ® —Digital, High-Definition Multimedia Interfaces with 1080p input support. ❖ HDMI ® capabilities...
Page 20 - “ClearScanTM” on page 101; DynaLightTM; “DynaLightTM” on page 101; AutoViewTM; “Using the Cloud Portal Service features” on page
20 Introduction synchronization to significantly increase the TV refresh rate for an even clearer fast motion video. See “ClearScan™” on page 101 . ❖ DynaLight™ —Backlight control monitors the brightness of each video frame and automatically adjusts backlight intensity based on the content to create...
Page 21 - Your TV” on page 25; POWER; for a few seconds and then plug them in and try again.
Introduction 21 4 Before connecting cables or devices to the TV, review the functions of the TV’s connections and controls, see “Overview of cable types” on page 25 . 5 Connect your other electronic device(s) to the TV, see “Connecting Your TV” on page 25 . 6 Install the batteries in the remote cont...
Page 22 - connections; Front panel; “Ambient Light; Left side; TV front and side panel controls and connections
22 Introduction TV front and side panel controls and connections 2 USB ports 1 Digital Audio jack 3 HDMI ® ports ARC HDMI ® only port Power LED Remote sensor Ambient light sensor (Sample Illustration) L7400U Series front and side panel controls and connections Front panel 1 Power On/Standby LED —Pow...
Page 23 - TV back panel controls and connections; (Sample Illustration) L7400U Series back panel controls and; Back panel controls; In Volume mode, the arrow buttons increase or decrease the
Introduction 23 TV back panel controls and connections COLOR STREAM HD / VIDEO2 IN HDMI IN 4 LAN IR OUT ANT CABLE ANALOG AUDIO OUT PC AUDIO IN VIDEO1IN R AUDIO L / MONO P R P B Y / VIDEO R VIDEO PC IN L / MONO AUDIO POWER button Volume up Volume down Switches the function of VOL+/- buttons to select...
Page 24 - In Source mode, the arrow buttons toggle the input from one; Back panel connections; —High-Definition Multimedia Interface input receives; Component/Standard (composite) video cables carry only video
24 Introduction ❖ In Source mode, the arrow buttons toggle the input from one source to the next. The mode of the VOL +/– buttons change in the following order each time the button is pressed: → Channel → Input → Volume → Back panel connections 4 LAN IN —Connects the TV to your home network. 5 HDMI ...
Page 25 - Connecting Your TV; Overview of cable types; cable converter box to the ANT/CABLE input on your TV.; Please tighten this connection by hand. Using tools may damage the; Chapter 2
25 Connecting Your TV Overview of cable types Before purchasing cables, know the connector types your devices require. You can purchase cables from most stores that sell audio/video devices. Coaxial cable (F-type) (Sample Illustration) Coaxial cable Coaxial (F-type) cable connects your antenna, cabl...
Page 26 - (Sample Illustration) Component video cables; cable; Dual-wand IR blaster cable
26 Connecting Your TV Standard A/V cables (composite video) usually come in sets of three, and connect to video devices with analog audio and composite video output. These cables (and the related inputs on your TV) are typically color- coded according to use: yellow for video, red for stereo right a...
Page 27 - Optical audio cable; (Sample Illustration) Optical audio cable; PC IN; “Connecting a computer to the TV’s PC IN terminal”; Separate audio cables are required.
Connecting Your TV 27 Optical audio cable (Sample Illustration) Optical audio cable Optical audio cable connects receivers with Dolby ® Digital, DTS ® or PCM (pulse-code modulation) optical audio input to the TV’s Digital Audio Out terminal, see “Connecting a digital audio system” on page 34 . Analo...
Page 28 - LAN cable; Standard LAN cable connects the TV to your home network, see; About the connection illustrations; You can connect different types and brands of devices to your TV in; box; (Sample Illustration) L7400U Series—Connecting to an antenna,
28 Connecting Your TV LAN cable (Sample Illustration) LAN cable Standard LAN cable connects the TV to your home network, see “Connecting the TV to a home network with an Internet connection - wired” on page 42 . Crossover LAN cable connects the TV directly to a computer, see “Connecting the TV direc...
Page 29 - When you use a cable box, you may not be able to use the remote control; To view the antenna or cable signal:; “Selecting the video input to view” on page 70; you to civil and criminal liability.
Connecting Your TV 29 Items needed: ❖ Coaxial cables ❖ Standard AV cables ❖ Component video cables (red/green/blue) NOTE When you use a cable box, you may not be able to use the remote control to program or access certain features on the TV. To view the antenna or cable signal: Select ANT/CABLE vide...
Page 30 - Connecting a Blu-rayTM/DVD player with ColorStreamTM or a; Connecting a Blu-rayTM/DVD player with ColorStreamTM video; Connecting a VCR with composite video; player with ColorStreamTM or a VCR with composite video
30 Connecting Your TV Connecting a Blu-ray™/DVD player with ColorStream™ or a VCR with composite video ❖ Connecting a Blu-ray™/DVD player with ColorStream™ video COMPONENT VIDEO P B P R Y AUDIO OUT L R R G B R R W G B R R W COLOR STREAM HD / VIDEO 2 IN R AUDIO L / MONO P R P B Y / VIDEO TV back pane...
Page 31 - Connecting remote IR devices; Using the IR blaster OUT terminal; “Dual-wand IR blaster cable” on
Connecting Your TV 31 NOTE When you use ColorStream™ HD or Video, please switch to the appropriate AV mode. To view antenna or Cable channels: Select the ANT/CABLE video input source on the TV.* To view the Blu-ray™/DVD player: Turn ON the Blu-ray™/DVD player. Select the ColorStream™ HD video input ...
Page 32 - “If you cannot locate the device’s; If you do not have a second device, coil the second wand with a rubber; (Sample Illustration) L7400U Series—Using the IR blaster OUT
32 Connecting Your TV To connect the IR blaster cable: 1 Locate the infrared sensor on the front of your device. This sensor is marked on some devices. If you are having issues locating the device's infrared sensor, see “If you cannot locate the device’s infrared sensor:” on page 33 . 2 Align one of...
Page 33 - “Setting the IR Blaster” on page 56; Satisfactory quality may not be attainable with certain devices.; If you cannot locate the device’s infrared sensor:
Connecting Your TV 33 To control the device(s): Point the TV remote control toward the front of the TV and press the button for the desired function. The signal passes from the remote control through the TV to the device via the IR Blaster cable. For more information, see “Setting the IR Blaster” on...
Page 34 - (Sample Illustration) L7400U Series—Connecting a digital audio; Connecting a digital audio system
34 Connecting Your TV Connecting a digital audio system The TV’s Digital Audio Out terminal outputs a Dolby ® Digital, DTS ® or 2-channel down-mixed PCM (pulse-code modulation) signal for using with an external Dolby ® Digital and/or DTS ® decoder, or other external audio systems with optical audio ...
Page 35 - Connecting an HDMI; To connect a PC to the HDMI; (Sample Illustration) L7400U Series—Connecting an HDMI; To view the HDMI
Connecting Your TV 35 Connecting an HDMI ® device The HDMI ® input on your TV receives digital audio and uncompressed digital video from an HDMI ® source device. This input is designed to accept HDCP (High- Bandwidth Digital-Content Protection) program material in digital form from EIA/CEA-861-D– co...
Page 36 - Using the TV remote and HDMI
36 Connecting Your TV NOTE To ensure that the HDMI ® device is reset properly: ❖ When turning on your electronic components, turn on the TV first, and then the HDMI ® device. ❖ When turning off your electronic components, turn off the HDMI ® device first, and then the TV. NOTE [1] EIA/CEA-861-D comp...
Page 37 - “Other HDMI; This feature is limited to models incorporating Toshiba’s HDMI; (Sample Illustration) L7400U Series— Connecting to HDMI
Connecting Your TV 37 Before controlling the devices: ❖ For an explanation of setup and operations, see “Other HDMI ® CEC Control functions” on page 84 . ❖ Configure the connected devices. See each device’s operation manual. NOTE This feature is limited to models incorporating Toshiba’s HDMI ® CEC C...
Page 38 - “Selecting the; Connecting a computer; Connecting a computer to the TV’s PC IN terminal; “Overview of cable types” on page 25; (Sample Illustration) L7400U Series—Connecting to a computer
38 Connecting Your TV HDMI ® ARC (Audio Return Channel) feature This feature enables the audio signal of the TV to be sent to an audio system via the HDMI ® cable. It will not be necessary to connect a cable from the audio output of the TV to the audio input of the audio system to reproduce the audi...
Page 39 - “Using your computer with the TV” on page 85; Some computer models cannot be connected to this TV.; Connect a computer to the TV’s HDMI; (Sample Illustration) L7400U Series—Connecting to an HDMI
Connecting Your TV 39 “Using your computer with the TV” on page 85 . NOTE ❖ Some computer models cannot be connected to this TV. ❖ If the computer has a compatible mini D-sub15-pin terminal, an adapter is not required. ❖ Depending on the content’s title and the computer’s specifications, some scenes...
Page 40 - “Acceptable signal; The edges of the picture may be hidden.; Connecting to a home network; The LAN port allows your Toshiba TV to connect to your home network.; Internet connection
40 Connecting Your TV The supported signal formats are VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz), and 1080p (24Hz/30Hz/60Hz). For signal specifications, see “Acceptable signal formats for PC IN, and HDMI ® ” on page 173 . NOTE ❖ The edges of the picture may be h...
Page 41 - Standard LAN cables; (Sample Illustration) L7400U Series—Connecting a network without
Connecting Your TV 41 Connecting the TV to a home network without an Internet connection Items needed: ❖ Standard LAN cables ❖ Router with a hub LAN Computer Computer Router with a hub TV back panel (Sample Illustration) L7400U Series—Connecting a network without Internet connection Connecting to a ...
Page 42 - (Sample Illustration) L7400U Series—Connecting with Internet; Connecting the TV to a home network with an Internet connection -
42 Connecting Your TV Connecting the TV to a home network with an Internet connection - wired Items needed: ❖ Coaxial or telephone cable (depending on your modem type) ❖ Standard LAN cables ❖ Router with Hub ❖ Modem (DSL or cable) Cable or Phone jack 1 2 2 2, 3 Computer Modem (DSL or cable) Router w...
Page 44 - Using the Remote Control; Controlling other devices; The TV’s remote control can operate other devices as described in; Installing batteries; To install batteries:; Slide back and pull up to open the cover.; Chapter 3
44 Using the Remote Control Controlling other devices The TV’s remote control can operate other devices as described in “Setting the IR Blaster” on page 56 . Installing batteries To install batteries: 1 Slide back and pull up to open the cover. (Sample Illustration) Removing the battery cover Chapte...
Page 45 - Install two AAA size batteries.; (Sample Illustration) installing the batteries
Using the Remote Control 45 2 Install two AAA size batteries. NOTE Use carbon zinc batteries or alkaline batteries. (Sample Illustration) installing the batteries 3 Slide on the cover. Do not expose batteries to excessive heat such as sunshine, fire, etc. NOTE v Dispose of batteries in a designated ...
Page 46 - Remote control effective range; For optimum performance, aim the remote control directly at the TV
46 Using the Remote Control Remote control effective range 1 For optimum performance, aim the remote control directly at the TV and make sure there are no obstructions between the remote control and the TV. 16.4 ft (5m) (Sample Illustration) Remote control effective range Remote control effective ra...
Page 47 - Learning about the remote control; CEC Control functions, see
Using the Remote Control 47 Learning about the remote control Only the buttons used to operate the TV are described in this section.For the HDMI ® CEC Control functions, see “Using HDMI ® CEC Control” on page 80 . 1 2 4 5 7 10 11 1314 16 18 19 2123 25 2728 29 31 32 34 35 3 6 8 9 12 151720 22 24 26 3...
Page 48 - function that is not available.
48 Using the Remote Control NOTE The error message “Not Available” may appear if you press a button for a function that is not available. Learning about the remote control Item: Description: Function: 1 POWER button Turns the TV On and Off. When the TV is on, the power LED indicator on the TV front ...
Page 49 - Initial Setup and Menu; Initial setup; When you first turn on or reset the TV, the; Menu Language; screen; Chapter 4
49 Initial Setup and Menu Initial setup When you first turn on or reset the TV, the Menu Language screen appears. NOTE v You can stop initial setup by pressing the EXIT button. However, if you do not finish Channel Tuning setting, the Quick Setup screen will appear every time you turn on your TV. v ...
Page 50 - Performing the initial setup; (Sample Illustration) Selecting Menu Language; (Sample Illustration) Quick Setup and Welcome window
50 Initial Setup and Menu Performing the initial setup 1 Menu Language Select a language and press the OK button. Please press [OK] to proceed. Menu Language English Français Español (Sample Illustration) Selecting Menu Language v Quick Setup screen will appear. About the Quick Setup screen The Quic...
Page 52 - Performing the Quick Setup; This option is hidden in the Home Mode.
52 Initial Setup and Menu Performing the Quick Setup 1 Country Select a country then press the OK button. 2 Time Zone Select Time Zone , and select a time zone from the submenu. Select Daylight Saving Time , and select On or Off from the submenu. Select Next . 3 Store / Home Mode Select Store / Home...
Page 53 - Setup, this method can be used. Wi-Fi Protected Setup is a standard; Assisted Setup; “Setting up the Network” on page; use a wireless access point with encryption.
Initial Setup and Menu 53 2 Select Wireless Setup , and select Easy Setup , Assisted Setup , or Manual Setup from the sub menu. Select Next . NOTE v Easy Setup . If your Access Point (AP) supports Wi-Fi Protected Setup, this method can be used. Wi-Fi Protected Setup is a standard designed to simplif...
Page 54 - If you do not want to scan channels, you do not need to make a; Channel Tuning; If you want to stop scanning, pressing the; EXIT; button while scanning
54 Initial Setup and Menu Performing the initial setup 6 Smart TV Power Management Select Active Standby Mode , and select On or Off . When Active Standby Mode is turned On , screens such as the Menu screen and Internet screen appear more quickly than usual when the power is turned on from standby. ...
Page 55 - (Sample Illustration) Auto Tuning Results screen
Initial Setup and Menu 55 Performing the initial setup After scanning is complete, the auto tuning results screen (such as the one below) will appear. ATV ATV ATV ATV DTV DTV DTV Auto Tuning (Antenna) Antenna Channels Found: 13 Ch. 101 - 201 201 101 - 201 201 101 - 201 201 101 - 201 201 Type RF Ch. ...
Page 56 - The IR Blaster may not work with some devices, and it may not control; Setting the IR Blaster
56 Initial Setup and Menu 8 IR Blaster Select Next or Skip . v To start the IR Blaster setup, select Next on the screen, or to skip the setup, select Skip . If you skip this setup, you can setup the IR Blaster at any time through the Installation > IR Blaster Setup menu. NOTE The IR Blaster may n...
Page 58 - PC; Amplifier; When
58 Initial Setup and Menu v HDMI 1 v HDMI 2 v HDMI 3 v HDMI 4 v PC 2 Press the q (arrow) button. 3 Use the t / u (arrow) buttons to select device mode key. v CABLE/SAT v BD/DVD v DVR/VCR v AUDIO v AUX 4 Press the OK button. v When Device Type is set to Receiver , Misc Audio or Amplifier , the Volume...
Page 59 - Time information is required for the Flip Bar. Time information is
Initial Setup and Menu 59 2 Press the q (arrow) button to select Interval Time . v 0.125 sec v 0.25 sec v 0.375 sec v 0.5 sec v 0.625 sec v 0.75 sec v 0.875 sec v 1 sec v After the interval time is selected, press the RED button to show the Test screen. The test will start automatically. 3 Press the...
Page 60 - Bar Wizard and select this channel each time the TV is turned on.
60 Initial Setup and Menu Bar Wizard and select this channel each time the TV is turned on. v If time information is not being received correctly, records of previously watched channels may not be stored properly. v The records of previously watched channels may be erased. v To set a channel from an...
Page 61 - Navigating the menu system
Initial Setup and Menu 61 5 When you have finished setting channels, press the GREEN button. The current time screen appears. 6 Select Next and press the OK button. If you are not connected to a network, select a channel to obtain time information. 7 Select Done and press the OK button. 10 Support I...
Page 62 - All menus close automatically if no selection is made within; QUICK; button to display the Quick menu and press the; Quick Menu
62 Initial Setup and Menu v All menus close automatically if no selection is made within approximately 60 seconds. v To close a menu instantly, press the EXIT button. Quick Menu Quick menu helps you access some options more quickly.Press the QUICK button to display the Quick menu and press the p / q...
Page 63 - Setting up your TV; How to navigate the menu; Changing initial settings; A confirmation message appears.; Individual settings; Français, and Español). The TV displays menus and messages in your; Chapter 5
63 Setting up your TV How to navigate the menu ❖ Press the MENU button. Select Installation , Main menu, Submenu, and then press the OK or EXIT button. Changing initial settings From Quick Setup: 1 Press the MENU button. 2 Select Installation > Quick Setup , and press the OK button. A confirmatio...
Page 64 - Country; You can select the country in which you reside.; your time zone; Daylight Saving Time; to designate the TV location. Select
64 Setting up your TV Country You can select the country in which you reside. 1 Press the MENU button. 2 Select Installation > Country and press the OK button. 3 Press the p / q (arrow) buttons to select the country. 4 Press the OK button. Time Zone This setting allows you to specify the correct ...
Page 65 - Auto Tuning; “Initial setup” on
Setting up your TV 65 3 Press the p / q (arrow) buttons to select Antenna or Cable . 4 Press the OK button. Storing channels in memory (optional) To make sure your TV stops only on the channels you want when you press the CH p / q buttons on the remote control or the control panel, store those chann...
Page 66 - Manual Tuning; Use buttons 0–9 on the remote control to enter the channel number; To prevent a channel from being viewed, you can set it to be skipped.; Skipping channels
66 Setting up your TV Manual Tuning After storing channels in memory, you can manually enter channels if the channel number is known. 1 Press the MENU button. 2 Select Installation > Channel Tuning > Manual Tuning , and then press the OK button. 3 Use buttons 0–9 on the remote control to enter...
Page 67 - You cannot tune skipped channels using the; CH; buttons 0–9 and the; DASH; button on the remote control.; Skipping video inputs; button again to turn off; Labeling analog TV channels; The Software Keyboard window appears.
Setting up your TV 67 NOTE You cannot tune skipped channels using the CH or buttons. Use buttons 0–9 and the DASH button on the remote control. Skipping video inputs You can set video inputs to be skipped when selecting inputs in the Input selection screen. To turn on skip 1 Press the MENU button. 2...
Page 68 - Labeling video inputs; for other video inputs.
68 Setting up your TV Labeling video inputs Labeling video inputs The input labels are shown in the input selector and banner displays. You can label video inputs according to the devices you have connected to the TV. 1 Press the MENU button. 2 Select Options > Input Options > Input Labeling a...
Page 69 - Basic features; Tuning Channels; Tuning to the next programmed channel; Tuning to a specific channel (programmed or unprogrammed); Analog; OK; Digital; Using Channel Return; Select the first channel you want to view.; Each time you press the; CH RTN; Chapter 6
69 Basic features Tuning Channels Tuning to the next programmed channel Press the CH p / q buttons on the remote control or TV control panel. Tuning to a specific channel (programmed or unprogrammed) Channel: Description: Analog Use the 0–9 buttons on the remote control. (For example, to select chan...
Page 70 - Selecting the video input to view; To select the video input to view:; Repeatedly press the; INPUT; Inputs; “Labeling video inputs” on page; INPUT; “Labeling video inputs” on page 68; To select an HDMI; Press the
70 Basic features Selecting the video input to view To select the video input to view: 1 Press the INPUT button. 2 Change the input: ❖ Press 0–7. ❖ Repeatedly press the p / q (arrow) buttons and then press the OK button. ❖ Repeatedly press the INPUT button. Inputs 0 ANT/CABLE 1 Video 1 2 Video 2 / C...
Page 71 - Analog CC mode; Using closed captions
Basic features 71 4 Press the OK button. Using closed captions To turn on the closed caption mode: 1 Press the MENU button. 2 Select Options > Closed Captions . 3 Press the OK button. 4 Press the p / q (arrow) buttons to select Closed Captions Display and press the OK button. 5 Press the p / q (a...
Page 72 - Digital CC settings; You can customize the closed caption display characteristics.
72 Basic features NOTE If the program or video you have selected is not closed captioned, no captions will be displayed. To view text: Press the p / q (arrow) buttons to highlight T1 , T2 , T3 , or T4 . WORLD WEATHER Temps Current F C Weather LONDON 51 11 MOSCOW PARIS ROME TOKYO 57 14 53 12 66 19 65...
Page 73 - Using the Closed Caption button; Entering a new PIN code; The PIN code cannot be set to “0000”.
Basic features 73 To customize the closed captions: 1 Press the MENU button. 2 Select Options > Closed Captions . 3 Press the OK button. 4 Press the p / q (arrow) buttons to select Digital CC Settings and then press the OK button. 5 Press the p / q (arrow) buttons to select a characteristic and t...
Page 74 - Changing or deleting your PIN code; Use the number buttons to enter your 4-digit PIN code.; Forgotten PIN code; button 4 times quickly.
74 Basic features Using closed captions Changing or deleting your PIN code 1 Press the MENU button. 2 Select Options > Parental PIN Setup . 3 Press the OK button. 4 Use the number buttons to enter your 4-digit PIN code. 5 Select Change PIN or Delete PIN , and then press the OK button. NOTE ❖ The ...
Page 75 - Using parental controls; button to select a level of blocking.; This feature will not be available if no PIN code is set.; Downloading an additional rating system; blocking TV programs and movies.; additional rating system can be downloaded.
Basic features 75 Using parental controls Blocking TV programs and movies by rating (V-Chip) Some TV programs and movies include signals that classify the content of the program (as unsuitable for younger viewers). The V-Chip feature in this TV detects the signals and blocks the programs according t...
Page 76 - The; Alt RS; button is only available if an additional rating system is; download updates if they become available.
76 Basic features 3 Press the OK button. 4 Enter your 4-digit PIN code. The Parental Control and Locks screen appears. 5 Press the p / q (arrow) buttons to select Enable Rating Blocking and press the OK button. 6 Press the p / q (arrow) buttons to select On . 7 Press the p / q (arrow) buttons to sel...
Page 77 - Rating system; Independent rating system for broadcasters:
Basic features 77 Rating system Independent rating system for broadcasters: Ratings: Description and Content themes: TV-MA Mature Audience Only (This program is specifically designed to be viewed by adults and therefore may be unsuitable for children under 17. L) Crude or indecent language S) Explic...
Page 78 - Displaying ratings; To display the rating of the program you are watching, press the; Unlocking programs; Locking specific channels; code is entered first, see; You must enter your PIN code to lock channels.; “Setting the PIN code”
78 Basic features Displaying ratings To display the rating of the program you are watching, press the INFO button on the remote control. Unlocking programs If you try to tune to a program that exceeds the rating limits you have set, the TV will enter program lock mode and a warning message will appe...
Page 79 - Locking video inputs; unlock the inputs by entering the PIN code.; Setting a time limit for games; You can use the GameTimerTM to set a time limit for playing a video; “Locking video
Basic features 79 Locking video inputs You can lock video inputs. You cannot view the input sources until you unlock the inputs by entering the PIN code. 1 Press the MENU button. 2 Select Options > Parental Control and Locks . 3 Press the OK button. 4 Enter your 4-digit PIN code. 5 Press the p / ...
Page 80 - Locking the control panel; You can lock the control panel to prevent your settings from being; CEC compatible devices from the TV remote control via HDMI; To set HDMI; Using HDMI
80 Basic features Locking the control panel You can lock the control panel to prevent your settings from being changed accidentally (by children, for example). When Panel Lock is set to On , none of the controls on the control panel operate except POWER . 1 Press the MENU button. 2 Select Options &g...
Page 81 - On; or the desired mode:; TV Speakers/Amplifier; Controlling HDMI; With your TV’s remote control, you can control the connected HDMI
Basic features 81 5 Press the p / q (arrow) buttons to select an item and press the OK button. Press the p / q (arrow) buttons to select On or the desired mode: ❖ TV Auto Power: On/Off ❖ Auto Standby: On/Off ❖ Amplifier Control: On/Off ❖ Initial Speaker Setting: TV Speakers/Amplifier NOTE These func...
Page 82 - (arrow) buttons to select the item you want to; CEC device with HDMI; “Learning about the remote control” on page 47
82 Basic features HDMI ® CEC Player Control menu functions 1 Press the QUICK button to open the Quick menu. 2 Select HDMI CEC Device Control , and then press the OK button. 3 Press the p / q (arrow) buttons to select the item you want to control, and then press the OK button. Item: Description: Powe...
Page 83 - Adjusting the amplifier’s audio; of your audio system.; Confirm that a connected HDMI; the TV’s DIGITAL AUDIO OUT terminal (not HDMI
Basic features 83 Adjusting the amplifier’s audio Using the TV’s remote control, you can adjust or mute the sound volume of your audio system. ❖ The VOL ( + - ) buttons adjust the volume level. ❖ The MUTE button turns off the sound. 1 Press the MENU button. 2 Select Options > HDMI CEC Control Set...
Page 84 - Other HDMI; Amplifier Control; Viewing the HDMI
84 Basic features Other HDMI ® CEC Control functions When Enable HDMI CEC Control and all items in the HDMI ® CEC Control Setup menu are set to On , the following functions will be enabled: Item: Description: TV Auto Power If an HDMI ® CEC device is turned on, the TV turns on automatically. Auto Sta...
Page 85 - Adjusting the image; “Selecting the video input to view” on; Adjustment Range; To reset the PC Settings:; Using your computer with the TV
Basic features 85 Using your computer with the TV Adjusting the image If the edges of the picture are hidden, readjust Horizontal Position and Vertical Position. If the picture is affected by interference, readjust Clock Phase and Sampling Clock. 1 Select PC input mode , see “Selecting the video inp...
Page 86 - Set these options to your preference:; Setting the timer to turn on the TV
86 Basic features Setting the timer to turn on the TV You can set the on timer to turn on the TV to a preset channel or input at a preset time. To activate the timer: 1 Press the MENU button. 2 Select Timers > On Timer . 3 Press the OK button. 4 Press the p / q (arrow) buttons to select Enable On...
Page 87 - Setting the sleep timer; You can set the TV to turn off after a specific amount of time; If a power failure occurs, the sleep timer setting may be cleared.; Sleep Timer
Basic features 87 To cancel the timer: 1 Press the MENU button. 2 Select Timers > On Timer . 3 Press the OK button. 4 Press the p / q (arrow) buttons to select Enable On Timer . 5 Press the t / u (arrow) buttons to select Off . Setting the sleep timer You can set the TV to turn off after a specif...
Page 88 - When an input's setting in this feature is set to On, The TV will; Default setting for each input is On.; Setting Active Standby Mode; power is turned on from standby.; This feature is grayed out, when; Store; Setting No Signal Power Down
88 Basic features Setting No Signal Power Down When an input's setting in this feature is set to On, The TV will automatically turn itself off after about 15 minutes if no signal is detected.You can change each input's setting to Off: ANT/CABLE or External Inputs. 1 Press the MENU button. 2 Select O...
Page 89 - When the TV is connected to the home network via LAN with the; Setting Wake on LAN Standby Mode
Basic features 89 Setting Wake on LAN Standby Mode When the TV is connected to the home network via LAN with the Wake on LAN Standby Mode On , your TV can be turned on by control from Apps. 1 Press the MENU button. 2 Select Options > Power Management > Wake on LAN Standby Mode and press the OK...
Page 90 - Displaying TV status information; To display TV status information, press the; Viewing support information; button to display support information containing Web/
90 Basic features Displaying TV status information To display TV status information, press the INFO button. The following information will be displayed (if applicable): ❖ Current input ( ANT/CABLE , Video , etc.) ❖ Either “CABLE” (for cable TV) or “ANT” (for over-the-air broadcasts), if ANT/CABLE is...
Page 91 - Resetting to Factory Defaults; You can reset all settings and channels to Factory Defaults.; Power failure; If power is lost while you are watching the TV, the Last Mode Memory
Basic features 91 Resetting to Factory Defaults You can reset all settings and channels to Factory Defaults. 1 Press the MENU button. 2 Select Installation > Reset TV . 3 Enter your PIN code (if a PIN code has been set). A confirmation screen appears. 4 Select Yes , and then press the OK button. ...
Page 92 - Selecting the picture size; You can view many program formats in several picture sizes— Native; current program in the way that looks best to you.; Chapter 7
92 Picture and Sound Controls Selecting the picture size You can view many program formats in several picture sizes— Native Mode™, 4:3, Full, TheaterWide 1, TheaterWide 2, TheaterWide 3, Normal, and Dot by Dot. NOTE v The picture size illustrations are examples only. The format of the image (in any ...
Page 93 - Picture and Sound Controls; Native ModeTM; This mode is supported only for HDMI
Picture and Sound Controls 93 You can save separate picture size preferences for each input on your TV. To select the picture size using the Quick menu: 1 Press the QUICK button to open the Quick menu. 2 Select Picture Size , and then press the OK button. 3 Press the p / q (arrow) buttons to select ...
Page 94 - Full
94 Picture and Sound Controls 4:3 (Sample Illustration) Picture size - 4:3 Some program formats will display with sidebars and/or bars at the top and bottom. Full This setting is for viewing in the 16:9 (480i, 480p) source programs only. (Sample Illustration) Picture size - Full 16:9 If receiving a ...
Page 95 - TheaterWide 1; This setting is for viewing in 4:3 format programs.; TheaterWide 2; This setting is for viewing letter box programs.; TheaterWide 3; This setting is for viewing letter box programs with subtitles.
Picture and Sound Controls 95 TheaterWide 1 This setting is for viewing in 4:3 format programs. (Sample Illustration) Picture size - TheaterWide 1 The center of the picture remains close to its original proportions, but the left and right edges are stretched horizontally to fill the screen. TheaterW...
Page 96 - Normal; display with sidebars and/or bars at the top and bottom.; Dot by Dot; “Dot by Dot” is a non-scaling display. Depending on the input signal
96 Picture and Sound Controls Normal This setting is for viewing SVGA, XGA, WXGA, and SXGA sources. (Sample Illustration) Picture size - Normal This size is a non-stretched display. Some input signal formats will display with sidebars and/or bars at the top and bottom. Dot by Dot This setting is for...
Page 97 - Scrolling the picture; You can adjust the picture position when the picture size is set to; Using the Auto Aspect feature; The auto aspect ratio feature is not applicable to the PC input.
Picture and Sound Controls 97 Scrolling the picture Scrolling the picture If the edges of the picture are hidden, you can adjust the image’s position. NOTE v You can adjust the picture position when the picture size is set to TheaterWide 2 or TheaterWide 3. v When viewing Cloud Portal, MediaShare or...
Page 98 - Adjusting the picture; Selecting the picture mode; Using the 4:3 Stretch
98 Picture and Sound Controls Using the 4:3 Stretch When 4:3 Stretch is activated, the TV displays 4:3 programs as a full- screen picture. NOTE This feature is available when Auto Aspect is set to On. 1 Press the MENU button. 2 Select Picture > Display Settings > 4:3 Stretch and press the OK b...
Page 99 - Adjusting the picture quality; Selection
Picture and Sound Controls 99 4 Press the EXIT button. v The picture mode can also be changed by pressing the PIC MODE button on the remote control. NOTE The picture mode you select affects the current input only. You can select a different picture mode for each input. Adjusting the picture quality ...
Page 100 - A confirmation screen appears.; Edge Enhancer; This feature may not work properly depending on the content.; Dynamic Contrast; Using the advanced picture settings features
100 Picture and Sound Controls To reset to the factory defaults: 1 Press the MENU button. 2 Select Picture > Reset . 3 Press the OK button. A confirmation screen appears. 4 Press the t / u (arrow) buttons to select Yes , and then press OK . Using the advanced picture settings features Edge Enhanc...
Page 101 - If the picture mode is set to; Game; or; mode, this feature is automatically
Picture and Sound Controls 101 DynaLight™ The DynaLight™ dynamic backlight control monitors the brightness of each video frame and automatically adjusts backlight intensity based on the content to create higher dynamic contrast, for deeper blacks and increased depth. 1 Press the MENU button. 2 Selec...
Page 102 - MPEG NR
102 Picture and Sound Controls MPEG NR The MPEG noise reduction feature allows you to reduce visible interference caused by MPEG compression. 1 Press the MENU button. 2 Select Picture > Advanced Picture Settings > Noise Reduction and press the OK button. 3 Press the p / q (arrow) buttons to se...
Page 103 - Ambient Light Sensor; When the picture mode is set to; AutoView; , this feature is automatically set; ColorMasterTM
Picture and Sound Controls 103 Ambient Light Sensor When the ambient light function of Auto Brightness Sensor is set to On , the TV optimizes the backlighting levels to suit ambient light conditions. 1 Press the MENU button. 2 Select Picture > Advanced Picture Settings > Auto Brightness Sensor...
Page 104 - Color Temperature; This feature is not available in Standard and Movie mode.; Resetting to the factory default
104 Picture and Sound Controls Color Temperature 1 Press the MENU button. 2 Select Picture > Advanced Picture Settings > Color Temperature and press the OK button. 3 Select Color Temperature and press the OK button. Press the p / q (arrow) buttons to select Cool , Medium , or Warm . 4 Press th...
Page 105 - Setting the expert picture settings; This feature is only available in Standard and Movie mode.; Test Pattern; It is not possible to turn off all three colors simultaneously.
Picture and Sound Controls 105 Setting the expert picture settings NOTE This feature is only available in Standard and Movie mode. Test Pattern When the test pattern is on screen, you can navigate the Picture submenus without removing the image. When you move to a non-Picture menu, or close the menu...
Page 106 - White Balance
106 Picture and Sound Controls White Balance Window Display This feature displays the Window Pattern to adjust the white balance. 1 Press the MENU button. 2 Select Picture > Expert Picture Settings > White Balance and press the OK button. 3 Press the p / q (arrow) buttons to select Window Disp...
Page 107 - Muting the sound; If you modify items in the; Sound; menu while Mute is active, Mute is; Selecting stereo/SAP broadcasts; If the sound is noisy, select; Mono; If there is no sound in; SAP; Adjusting the audio
Picture and Sound Controls 107 Adjusting the audio Muting the sound Press the MUTE button to partially reduce (1/2 Mute) or turn off (Mute) the sound. Each time you press the MUTE button, the mute mode changes in the following order: 1/2 Mute, Mute, Volume, 1/2 Mute, etc. NOTE If you modify items in...
Page 108 - Selecting the Sound Mode; When using Sonic Separation for the first time, a usage; Adjusting the volume balance
108 Picture and Sound Controls Selecting the Sound Mode You can select your desired Sound Mode from the modes described below. Mode: Description: Standard Standard sound settings Music Ideal for music programs. Movie Ideal for watching movies. Clear Voice This setting makes dialog easier to hear. So...
Page 109 - Adjusting the audio balance; MENU; Adjusting the Advanced Sound Settings
Picture and Sound Controls 109 NOTE v This setting is temporary. When you switch the TV to standby, or change the channel or external input, the value is restored to the previous setting. v Sonic Separation has been designed for private use and entertainment in your home environment. Please note tha...
Page 110 - Adjusting the range; TruSurround
110 Picture and Sound Controls Adjusting the audio Adjusting the range Use the Sound Equalizer to adjust the sound quality to your liking. 1 Press the MENU button. 2 Select Sound > Advanced Sound Settings > Sound Equalizer and press the OK button. 3 Press the t / u (arrow) buttons to select a ...
Page 111 - TruVolumeTM; This setting cannot be used when the TV Speakers are set to Off.; Setting the Primary Audio Language
Picture and Sound Controls 111 TruVolume™ Use the TruVolume™ feature to maintain a volume, despite volume spikes or changes in content sources. 1 Press the MENU button. 2 Select Sound > TruVolume and press the OK button. 3 Press the p / q (arrow) buttons to select On or Off . 4 Press the EXIT but...
Page 112 - Audio Delay; Auto
112 Picture and Sound Controls 3 Press the p / q (arrow) buttons to select Auto or PCM . 4 Press the EXIT button. Audio Delay 1 Press the MENU button. 2 Select Sound > Digital Audio Output > Audio Delay and press the OK button. 3 Press the p / q (arrow) buttons to select Auto or Manual . Auto:...
Page 113 - Selecting the analog audio output format
Picture and Sound Controls 113 Selecting the analog audio output format Set the type of analog audio that is output from the ANALOG AUDIO OUT terminal. 1 Press the MENU button. 2 Select Sound > Analog Audio Output and press the OK button. 3 Press the p / q (arrow) buttons to select Fixed or Varia...
Page 114 - Advanced features; Using your home network; feature. In order to do this, you will have to configure the network; Some features may require an always-on broadband Internet; Chapter 8
114 Advanced features Using your home network ❖ This TV can share videos, music, and photos across your home network and other connected products through the MediaShare feature. In order to do this, you will have to configure the network settings on your TV, see “MediaShare (Videos, Music, and Photo...
Page 115 - When using a Wireless network connection; identified as harmful.; Using the TV in a wireless LAN environment:; for audio and SD video streaming.
Advanced features 115 When using a Wireless network connection Wireless LAN and your Health: Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. However, the level of energy emitted by Wireless LAN devices is much less than the electromagnetic energy emitted...
Page 116 - “Advanced Network Setup” on page; Wireless Setup; Assisted Setup (setup using the AP's notification information) −; Setting up the Network
116 Advanced features Setting up the Network You can select the Network Type. 1 Press the MENU button. 2 Select Network > Network Setup > Connection Type and press the OK button. 3 Press the p / q (arrow) buttons to select Wired or Wireless . 4 Press the OK button. ❖ If you select Wired , see ...
Page 117 - Easy Setup using PBC (Push button configuration); Easy Setup using PIN (Personal Identification Number); When a screen reporting that “Wireless Configuration is complete”
Advanced features 117 Easy Setup using PBC (Push button configuration) 1 Press the MENU button. 2 Select Network > Network Setup > Wireless Setup and press the OK button 3 Press the p / q (arrow) buttons to select Easy Setup and press the OK button. 4 Press the p / q (arrow) buttons to select ...
Page 118 - “Using the software keyboard” on page 125; The Security Key must adhere to the following conditions:; Settings are not saved if the; BACK; button is pressed before Done is
118 Advanced features To cancel searching for the AP: ❖ Press the BACK button while searching for the AP. A message appears. Press the t / u (arrow) buttons to select Yes , and then press the OK button. Assisted Setup 1 Press the MENU button. 2 Select Network > Network Setup > Wireless Setup a...
Page 119 - Manual Setup; When Authentication is Open System, only Encryption, None and WEP
Advanced features 119 Setting up the Network Manual Setup 1 Press the MENU button. 2 Select Network > Network Setup > Wireless Setup and press the OK button. 3 Press the p / q (arrow) buttons to select Manual Setup , and then press the OK button. 4 Press the p / q (arrow) buttons to select Net...
Page 120 - Wireless Information; The settings configured in Wireless Setup can be confirmed.
120 Advanced features The Software Keyboard window appears. 10 Input the Security Key using the Software Keyboard. For more information, see “Using the software keyboard” on page 125 . 11 To save your settings, press the GREEN button. NOTE This item is grayed out when Encryption is set to None. 12 S...
Page 121 - Advanced Network Setup; IP Address Setup
Advanced features 121 DHCP The message, “Enabled” appears when you use DHCP. The message, “Disabled” appears when you do not use DHCP. IP Address The TV’s IP address Subnet Mask Value of the Subnet Mask Default Gateway Default GATEWAY’s address DNS DNS’s address NOTE Even if an AP for IEEE 802.11n i...
Page 122 - field and; DNS Setup
122 Advanced features 3 Press the p / q (arrow) buttons to select IP Address Setup , and then press the OK button. 4 Press the p / q (arrow) buttons to select Auto Setup and press the OK button. 5 Press the p / q (arrow) buttons to select Off . 6 Press the p / q (arrow) buttons to select IP Address ...
Page 123 - (arrow) buttons to select the field you want to; MAC Address; You can view the fixed MAC address for the TV.
Advanced features 123 4 Press the p / q (arrow) buttons to select Auto Setup and press the OK button. 5 Press the p / q (arrow) buttons to select On . NOTE Other items are grayed out when Auto Setup is set to On . Manual setup: 1 Press the MENU button. 2 Select Network > Network Setup > Advanc...
Page 124 - Network Connection Test
124 Advanced features Network Connection Test This function checks Internet connectivity. 1 Press the MENU button. 2 Select Network > Network Setup > Network Connection Test , and then press the OK button. A message appears to indicate whether the connection was successful or not. NOTE Favorab...
Page 125 - button on a field that accepts character input.; Using the software keyboard
Advanced features 125 Using the software keyboard You can enter text using the Software Keyboard.The Software Keyboard window will appear when you press the OK button on a field that accepts character input. NOTE ❖ When using the SmartTV features, software keyboard availability depends on the Intern...
Page 126 - Enter text using the software keyboard
126 Advanced features Enter text using the software keyboard 1 Highlight the desired character on the on-screen software keyboard. 2 Press the OK button. 3 Repeat Step 1 and 2 until you have entered all desired text. 4 Select Done or press the GREEN button to save your settings and return to the pre...
Page 127 - An Internet connection is required.; You will not be able to use the TV set while performing the upgrade.; If the network is not available, a warning message appears.; Viewing the Software Licenses; Performing a Software Upgrade
Advanced features 127 Performing a Software Upgrade TOSHIBA may offer upgrades for the TV's software in the future.The TV's software is upgraded via the Network. NOTE An Internet connection is required. Before downloading software: 1 Configure your TV to connect to the Internet. NOTE ❖ You will not ...
Page 128 - Connecting your PC to the TV for the first time; When selecting the Toshiba TV for the first time, a 8-digit code will; Using Intel
128 Advanced features Using Intel ® WiDi / wireless display Intel ® Wireless Display (Intel ® WiDi) is supported on this TV. Toshiba has also included peer-to-peer wireless technologies to allow direct wireless connection between the TV and Intel ® WiDi equipped PC or mobile device. If your PC or mo...
Page 129 - If the device has been inactive for some time, the Intel; Changing the Intel
Advanced features 129 WiDi software on the device or by pressing the EXIT button on the TV remote control. NOTE If the device has been inactive for some time, the Intel ® WiDi connection will be disconnected automatically. Changing the Intel ® WiDi Device Name The TV's Intel ® WiDi device name can b...
Page 130 - Setting up the Flip Bar; Using the Flip Bar features
130 Advanced features Using the Flip Bar features The Flip Bar function adds thumbnails of programs currently being broadcast for set channels, the channel being watched at the same time the previous day, or the channel being watched at the same time one week previously to the bottom of the screen, ...
Page 131 - after confirming; If you delete a device from IR Blaster Setup, any Favorite Channels
Advanced features 131 4 Select Next and press the OK button. 5 Read the information on screen, and select Agree after confirming the contents. Then select Next and press the OK button. 6 To set Favorite Channels, select Yes and press the OK button. 7 Register a channel. ❖ Up to 10 channels can be se...
Page 132 - Selecting programs using the Flip Bar; FLIP BAR; Deleting the history information for thumbnails displayed for; Trash
132 Advanced features Using the Flip Bar features Selecting programs using the Flip Bar Display thumbnails on the bottom of the screen and select your desired program. 1 Press the FLIP BAR ( ) button while watching TV broadcast or an external input. Thumbnails will be displayed at the bottom of the ...
Page 133 - Changing the Flip Bar settings; “Using the; Yesterday thumbnail display settings
Advanced features 133 Changing the Flip Bar settings Change the Favorite Channel contents or reset the previously watched channel information. Changing the Favorite Channel contents 1 Press the MENU button. 2 Select Options > Flip Bar Setup and press the OK button. 3 Press the p / q (arrow) butto...
Page 134 - Last Week thumbnail display settings
134 Advanced features Last Week thumbnail display settings 1 Press the MENU button. 2 Select Options > Flip Bar Setup and press the OK button. 3 Press the p / q (arrow) buttons to select Last Week . 4 Press the t / u (arrow) buttons to select On or Off . If Off is selected, Last Week thumbnails w...
Page 135 - Using the Cloud Service; “Setting; Using the Cloud Portal Service features; “Setting up the Network” on page 116
Advanced features 135 Using the Cloud Service Smart TV with Cloud Portal offers a smarter connected experience with faster operation and new services. Whether you want to connect to your favorite content streaming from: ❖ the Internet ❖ your home network ❖ mobile devices You can also connect with pe...
Page 136 - eManual; eMANUAL; Feature apps; to the things you love— like Netflix; NETFLIX; After having activated Netflix
136 Advanced features NOTE ❖ If the display of the date and time is wrong, try to turn off the TV, and turn it on again. ❖ The menu items for features like the Apps may change in the upgrade process. eManual The eManual provides on-screen, context-sensitive, instructions that describe the TV feature...
Page 137 - To close Netflix; The Netflix ESN screen appears.; Netflix Setup; VUDU; definition movies on the Web and much more.; Use of VUDUTM Movies & TV requires a working broadband Internet
Advanced features 137 To close Netflix ® , press the EXIT button. To confirm the Netflix ESN (Electronic Serial Number): 1 Press the MENU button. 2 Select Network > Smart Apps Setup > Netflix Setup and press the OK button. 3 Press the p / q (arrow) buttons to select ESN , and then press the OK...
Page 138 - Internet; Does not support downloading of files or fonts.; Using the web browser; GREEN; button when finished.
138 Advanced features 3 Press the OK button. 4 Press the t / u (arrow) buttons to select Yes , and then press the OK button. Internet Open Web Browser The open web browser with HTML5 video and audio codecs which allow you to explore the web the way you want. Search for, bookmark, and browse your fav...
Page 139 - Browsing favorite websites; STAR
Advanced features 139 NOTE ❖ When you press the GREEN button while browsing web content, you can use the p / q / t / u (arrow) buttons on the remote control in mouse control mode. ❖ You can use a Wireless QWERTY keyboard in addition to the software keyboard (wireless keyboard not included). Browsing...
Page 140 - Adding favorite websites; “Using the web browser” on page 138
140 Advanced features Adding favorite websites 1 Connect to the network. 2 Press the button on the remote control to access the web browser page. 3 Follow “Using the web browser” on page 138 to display your desired website. 4 Press the Navigation buttons to scroll to Favorites STAR on the Browser Me...
Page 141 - button on; “Connecting to a home network” on page; MediaShare specifications; Connected Media Server:; Supported file system:; Basic operation; When Auto Start is enabled, you will be asked if you want to start the; MEDIA SHARE; buton on the remote control.
Advanced features 141 MediaShare (Videos, Music, and Photos) MediaShare provides a simple graphic interface to quickly access and share videos, music, and image files across your home network and other connected devices. To access the MediaShare Service, press the MEDIA SHARE button on the remote or...
Page 142 - To change the List Mode setting; Preview Mode; To change the Auto Start setting; If Auto Start is set to; Off
142 Advanced features To change the List Mode setting Set the display mode on the list screen for the Videos, Music and Photos categories. 1 Press the MENU button. 2 Select Options > MediaShare Setup > List Mode and press the OK button. 3 Press the p / q (arrow) buttons to select Preview Mode ...
Page 143 - Manual Start; Sorting may take a little time.; To close the MediaShare
Advanced features 143 Manual Start 1 Insert a USB device into the USB port. 2 Press the MEDIA SHARE button. 3 To change the device, press the p / q / t / u (arrow) buttons to select the devices on the screen, and then press the OK button. 4 Press the p / q (arrow) buttons to select the device and th...
Page 144 - Using MediaShare with a Media Server; You need to configure a home network before using this feature, see; To select a file in the list of contents
144 Advanced features Using MediaShare with a Media Server You need to configure a home network before using this feature, see “Setting up the Network” on page 116 . 1 Press the MEDIA SHARE button. 2 To change the device press the p / q / t / u (arrow) buttons to select the Devices button on the scr...
Page 145 - Viewing movie files; “To select a file in the list of contents” on page 143; If playback finishes before the; Resume Playback; If the same file is selected and played, playback will resume from; To pause playback
Advanced features 145 Viewing movie files Basic Playback 1 Select a file, see “To select a file in the list of contents” on page 143 . 2 Press the OK button or PLAY button to begin playback. NOTE Depending on the file size, it may take some time to start playback. 3 Press the STOP button to stop pla...
Page 146 - To locate a specific file; access the desired file.; To play in fast reverse or fast forward directions; CC; To set the repeat mode; To select a movie from Play List (except for Media Renderer
146 Advanced features To locate a specific file ❖ Press the Skip Reverse or Skip Forward button repeatedly to access the desired file. ❖ ( Z ): Playback starts from the beginning of the current file or previous file. ❖ ( z ): To locate subsequent files. To play in fast reverse or fast forward direct...
Page 147 - To display the file status information; To register your TV to a DivX; This TV allows you to play back files purchased or rented from DivX; To unregister your device:; A confirmation message will appear. Select
Advanced features 147 To display the file status information 1 Press the INFO button during playback. The information will be displayed at the bottom of the screen. 2 Press the INFO button again to hide the information. NOTE The information may not correctly display depending on the content or media...
Page 148 - DivX Certified; To playback DivX Plus; Yes
148 Advanced features device that has passed rigorous testing to verify that it plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified ® device must be registered in order to play purchased DivX ...
Page 149 - Using Multi Title and Alternative Timelines Multi Title; HD files may contain up to 100 titles.; RED; Depending on the content data will not be operated.; Maximum number of files:
Advanced features 149 NOTE ❖ Depending on the content data will not be operated. ❖ The playback speed ( CC / cc ) may not change depending on the stream. Using Multi Title and Alternative Timelines Multi Title DivX Plus ® HD files may contain up to 100 titles. You can change the title (It contains s...
Page 150 - Playing music files; Depending on the file size, it may take some time to start playback.; PAUSE; button or operations during Pause may not be functional; to access the desired file.
150 Advanced features NOTE It may not be possible to use certain playback or display some files. In some cases certain files and servers may not support playback features, such as pause. Playing music files Basic Playback 1 Select a file, see “To select a file in the list of contents” on page 143 . ...
Page 151 - To select music from Play List (except for Media Renderer
Advanced features 151 To set the repeat mode 1 Press the QUICK button. 2 Press the p / q (arrow) buttons to select the Repeat . The current repeat setting appears. 3 Press the u (arrow) button. 4 Press the p / q (arrow) buttons to select Off , All , or 1 . 5 Press the BACK button. The setting is eff...
Page 152 - Viewing photo files; If all of the photos will not fit in one screen, when pressing the; Displaying thumbnail data may take time.
152 Advanced features File specifications: USB device use: ❖ File format: MP3, MP4 (AAC), WMA7/8/9, WAV(LPCM) ❖ Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz ❖ Bit rate: From 32 to 320 kbps ❖ Maximum number of files: 1000 per folder Content on a connected Media Server: ❖ File format: MP3, MP4 (AAC), ...
Page 153 - Single View mode; In this view mode, only files located in the selected directory are; Single view mode is changed to Multi View mode when the; button is; Slide Show mode; only files located in the selected directory appear.; Mode settings; Interval Time; To set Background Music
Advanced features 153 Single View mode In this view mode, only files located in the selected directory are displayed. When moving from Multi View mode to Single View mode, the currently selected photo appears. 1 On Multi view mode, press the p / q / t / u (arrow) buttons to select a file, and then p...
Page 154 - The music file in the same folder as the displayed photo will start; Rotate the image
154 Advanced features The music file in the same folder as the displayed photo will start playing. NOTE ❖ When the music file repeat mode is set to All , all the music files in the same folder as the photo will be played repeatedly. ❖ To stop music file playback, select Off in Background Music . Rot...
Page 155 - Search; Folders are not subject to the search function.; The search retrieval stops when content is being played.
Advanced features 155 Content on a connected Media: ❖ Data compatibility: JPEG Exif ver 2.2 ❖ File format: JPEG ❖ Maximum photo resolution: 4096 x 4096 ❖ Maximum number of files: 1000 per folder. Search To search for content, 1 Select the search. 2 Enter in keyword and the search will search for: ❖ ...
Page 156 - Network Device Setup; External Control Setup; To access the Home Control Profile:; The Home Control Profile window will appear.
156 Advanced features Network Device Setup In order to set the access the External Control Setup , Media Renderer Setup , or Device Name Setup , you must use the Network Device Setup menu. External Control Setup 1 Press the MENU button. 2 Select Network > Network Device Setup > External Contro...
Page 157 - Setting up the Media Renderer feature; The TV can be configured as a Media Renderer. When operating as a; Device Name setup; The maximum number of characters allowed for the device name is 15.
Advanced features 157 Setting up the Media Renderer feature The TV can be configured as a Media Renderer. When operating as a Media Renderer, the TV displays content provided by mobile devices or PCs. The selection of the media is done by the media controller. The TV can play photo, movie, or audio ...
Page 158 - Using Apps on a Tablet or Smart phone; or your home network.; respect to current apps.; Chapter 9
158 Cloud Portal Companion Apps Using Apps on a Tablet or Smart phone Toshiba provides apps for tablets and smart phones. The Companion apps allow you to connect to your favorite content with apps, on-line content, or your home network. NOTE Apps will vary by country and availability may change in t...
Page 159 - Apps Collaboration; To select the Apps Control Profile; The Apps Control Profile window will appear.; Apps Control Profile
Apps Collaboration 159 compatible with this product. In order to experience the full suggested capabilities of this product, fully-compatible devices may be required. v Apps can only be used when your TV and your tablet or smart phone are connected to the Internet. v Some app features may require th...
Page 160 - Pairing
160 Apps Collaboration pairing must be carried out again. To enable the New Device Detection: 1 Press the MENU button. 2 Select Network > Network Device Setup > External Control Setup and press the OK button. 3 Press the p / q (arrow) buttons to select and set Apps Control Profile and press th...
Page 161 - Troubleshooting; General troubleshooting; causes/solutions for the problem you are experiencing.; TV stops responding to controls.; control panel and you cannot turn off the TV, press and hold the; function, simply unplug the TV from the AC outlet and plug it back in.
161 Troubleshooting General troubleshooting Before calling a service technician, review this chapter or visit the Toshiba Technical Support Website at "support.toshiba.com" for possible causes/solutions for the problem you are experiencing. Before you begin to troubleshoot any problem, first...
Page 162 - “Resetting to Factory Defaults” on page 91; “Installing batteries” on; General picture problems.; “Connecting Your TV” on page; Video Input Selection problems.; a second; Cannot view external signals.; Picture problems
162 Troubleshooting Other problems. If your TV’s problem is not addressed in this Troubleshooting chapter or the recommended solution has not worked, use the Reset Factory Defaults procedure, see “Resetting to Factory Defaults” on page 91 . TV will not turn on. Check the AC wall outlet by trying ano...
Page 163 - ensure that the Input Lock is set to Off, see; Poor display color or no color.; “ColorMasterTM” on page 103; Poor composite picture.; video; Picture and sound are out of sync.; If the TV is connected to an A/V receiver that has a programmable
Troubleshooting 163 ensure that the Input Lock is set to Off, see “Locking video inputs” on page 79 . Poor display color or no color. Check for proper hookup connections between your devices.The station may be having broadcast difficulties. Try another channel. Adjust the Tint and/or Color, see “Col...
Page 164 - Sound problems; “Connecting a digital audio; MUTE; Remote control problems; “Storing
164 Troubleshooting Sound problems Check the antenna/cable connections, see “Connecting a digital audio system” on page 34 . The station may be having broadcast difficulties. Try another channel. The sound may be muted. Press the VOL (+ -) buttons or MUTE button. If you are connected to a computer u...
Page 165 - “Using closed captions” on page 71; INFO; “Forgotten; Closed caption problems
Troubleshooting 165 Closed caption problems If the program or video you have selected is not closed captioned, no captions appear on the screen. If text is not available, a black rectangle may appear. If this happens, turn off the closed caption feature, see “Using closed captions” on page 71 . A cl...
Page 166 - Network problems; Cannot connect to the Internet.; are connected properly, see
166 Troubleshooting HDMI ® problems HDMI ® problems HDMI ® cables. Ensure that HDMI ® cables with the ( ® ) Logo are used, see “Connecting an HDMI ® device” on page 35 . Network problems Cannot connect to the Internet. Check the modem and its incoming cable/telephone connections, see “Connecting to ...
Page 167 - are on the same subnet.; Unstable network connection.; and then reconnect them.; The media server name is not displayed.; “Connecting the
Troubleshooting 167 computer. ❖ Example of proper setup: The computer has the IP address 192.168.0.100 with the Subnet mask 255.255.255.0, the TV has the IP address 192.168.0.101 with the Subnet mask 255.255.255.0; both are on the same subnet. ❖ Example of improper setup: The computer has the IP add...
Page 168 - Wireless network problems; “Network Connection Test” on page 124; MediaShare problems; application software may not be viewable.
168 Troubleshooting Wireless network problems Check that the router/AP (Access point) power is On.After starting wireless network setup, confirm that the network is configured properly by performing the network connection test, see “Network Connection Test” on page 124 . Check the router/AP’s connec...
Page 169 - For Connected MediaShare; Depending on the media server, it may take time to display the list.; Media Renderer; Media Renderer to Off.; Cloud Portal; Cloud Portal Freezes on the TV screen.; on. Then try the Cloud Portal again; Pause or delay while navigating Cloud Portal features and apps.; Light Indicator; The Power light on the front of the TV indicates the TV’s status, as; Power On/Standby light; The TV is On and operating properly.; If the problem persists after trying the solutions; In the U.S., visit Toshiba Customer Support Center on the web at
Troubleshooting 169 For Connected MediaShare Depending on the media server, it may take time to display the list. Media Renderer Depending on the state of this TV, the Media Controller may not be able to control a Media Renderer playback.If Media Renderer playback starts regardless of the user's int...
Page 170 - Specifications; This model complies with the specifications listed below.; Television system; Appendix A
170 Specifications NOTE v This model complies with the specifications listed below. v Designs and specifications are subject to change without notice. v This model may not be compatible with features and/or specifications that may be added in the future. Television system NTSC standard ATSC standard...
Page 171 - ColorStream; Power consumption
Specifications 171 Power consumption 55L7400U 2.1 A (maximum current) 0.5 W in Standby mode Audio power 55L7400U 15 W + 15 W Speaker type 55L7400U 1 2/11 inch (3 cm) x 3 7/9 inch (9.6 cm) x 2 pcs Video/audio terminals Video/audio input Video 1 V (p-p), 75 ohm, negative sync, NTSC. Audio 200 mV (rms)...
Page 172 - Ethernet; Dimensions with table stand; Wireless connection
172 Specifications Wireless connection Standard IEEE 802.11a/b/g/n/ Frequency Range 5.15-5.35 GHz, 5.47-5.725 GHz, 5.725-5.850 GHz, 2.400–2.473 GHz Security WPA2, mixed mode WPA2/WPA, WEP, open Ethernet IEEE 802.3. USB Universal Serial Bus Specification, Revison 1.1.Universal Serial Bus Specificatio...
Page 173 - Acceptable signal formats for PC IN, and HDMI; PC IN signal formats; Format Resolution V. Frequency H. Frequency Pixel Clock
Specifications 173 Acceptable signal formats for PC IN, and HDMI ® PC IN signal formats NOTE v The PC IN on this TV only accepts signal formats which are compliant with VESA-DMT as in the table below. Since some PCs input signals are different from the resolution and frequency described in the table...
Page 175 - Operating the TV with combination buttons; mode by pressing a combination button while holding down a color
Specifications 175 Acceptable signal formats for PC IN, and HDMI ® Operating the TV with combination buttons You can directly operate the TV power, input, picture size, and picture mode by pressing a combination button while holding down a color button. Button Color Combination Button Behavior/Mode ...
Page 176 - External Keyboard Layout; Setting the keyboard layout; the situation you are entering characters.; Appendix B
176 External Keyboard Layout ❖ How to enter French or Spanish characters using the external keyboard. ❖ The external keyboard must be purchased separately. ❖ For how to use the external keyboard, refer to the User's Guide that comes with the keyboard. Setting the keyboard layout Before entering Fren...
Page 179 - International Key table; To enter special characters, follow the table below:
179 International Key table To enter special characters, follow the table below: Diacritic press first (Dead key) press second Space E e A a O o U u Y y I i Z z R r Acute ' or ´ ' É é Á á Ó ó Ú ú Ý ý Í í Ź ź Ŕ ŕ Grave ` ` È è À à Ò ò Ù ù Ỳ ỳ Ì ì Umlaut Shift + ' (") ¨ Ë ë Ä ä Ö ö Ü ü Ÿ ÿ Ï ï Til...
Page 180 - Index; Numerics; locking specific channels 78
180 Index Numerics 4:3 stretch using 98 A advanced picture settings Ambient Light Sensor 103 Base Color Adjustment 103 ClearScan ™ 101 Color Temperature 104 ColorMaster™ 103 DNR 102 DynaLight ™ 101 Dynamic Contrast 100 Edge Enhancer 100 MPEG NR 102 resetting to factory default 104 using 100 audio ad...
Page 181 - specific channel 69
Index 181 manual tuning 66 next programmed channel 69 skipping 66 skipping video inputs 67 specific channel 69 storing in memory 65 closed captions Analog CC mode 71 button 73 Digital CC settings 72 using 71 computer adjusting image 85 to the TV’s HDMI ® 39 using with the TV 85 connecting a computer...
Page 182 - playing music files 150
182 Index I icon safety 18 IR Blaster Out terminal using 31 IR Blaster setup 56 M Media Renderer device name setup 157 setup 156 MediaShare (Media Player) basic operation 141 playing music files 150 specifications 141 viewing movie files 145 viewing photo files 152 N network advanced setup 121 conne...
Page 184 - Video
184 Index V Video video input locking 79 selecting 70 W web browser 138 access web page 138 adding favorites 140 browsing favorites 139
Toshiba 26C100U
User Manual
Toshiba 55SL412U
User Manual
Toshiba 50L7300U
User Manual
Toshiba 58L9300U
User Manual
Toshiba 50L5200U
User Manual
Toshiba 24V4210U
User Manual
Toshiba 40L3400U
User Manual
Toshiba 50L1350U
User Manual
Toshiba 24SLV411U
User Manual
Toshiba 50L2400U
User Manual