Toshiba 55L6200U - Manuals

9 Trademark Information • Cinema Series, ClearScan, ColorStream, Dynalight, GameTimer, Native Mode, Surflock, and Trivector are trademarks or registered trademarks of Toshiba America Information Systems, Inc. and/or Toshiba Corporation. • Android and Google Play are trademarks of Google Inc. • Audys...

11 Contents Chapter 1: Introduction.............................................................. 20 Features ..................................................................21Overview of installation, setup, and use ..................22TV front and side panel controls & connections .....23 Fr...

13 Contents Chapter 4: Initial Setup and Menu............................................ 51 Initial setup .............................................................51 Performing the initial setup ...............................52 IR Blaster Setup ....................................................

14 Contents Setting the 3D PIN code ..........................................81 Enter a new PIN code ........................................81Change or delete your PIN code........................82Forgotten PIN codes .........................................82Setting the 3D start message ...........

15 Contents Controlling HDMI ® CEC playback devices .........98 HDMI ® CEC Control input source selection .....100 Adjusting the amplifier’s audio........................100Other HDMI ® CEC Control functions ...............101 Using the HDMI® RGB Range feature ..................101Viewing the HDMI® ...

16 Contents DynaLight ® ......................................................118 Static Gamma .................................................118ClearScan ® .............................................................................................. 118 Cinema Mode .................................

20 Chapter 1 Introduction Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and...

21 Introduction Features Features ❖ Integrated digital tuning (8VSB ATSC and QAM) — Eliminates the need for a separate digital converter set-top box (in most cases). ❖ 1920 x 1080 output resolution . ❖ Four HDMI ® —Digital, High-Definition Multimedia Interfaces with 1080p input support ❖ HDMI ® capa...

23 Introduction TV front and side panel controls and connections on, unplug the power cords for a few seconds and then plug them in and try again. 9 See “Navigating the menu system” on page 61 for a quick overview of navigating the TV’s menu system. 10 Program channels into the TV’s channel memory, ...

24 Introduction TV back panel controls and connections 5 IR Blaster OUT —Used to connect and control infrared remote-controlled devices. 6 Digital Audio Jack —Optical audio output in Dolby ® Digital or PCM (pulse-code modulation) format for connecting an external Dolby ® Digital decoder, amplifier, ...

25 Introduction TV back panel controls and connections Back panel controls 1 POWER —Turns the TV On and Off . 2 VOL +- —Adjusts the volume level. When an on-screen menu appears, these keys function as ( / ) menu navigation buttons. 3 CH Up/Down arrow buttons —Changes the channel. When an on-screen m...

26 Introduction TV back panel controls and connections 15 Analog Audio OUT —Analog audio outputs for connecting an audio amplifier. 16 Digital Audio OUT —Optical audio output in Dolby ® Digital or PCM (pulse-code modulation) format for connecting an external Dolby ® Digital decoder, amplifier, A/V r...

27 Chapter 2 Connecting Your TV Overview of cable types Before purchasing cables, know the connector types your devices require. You can purchase cables from most stores that sell audio/video devices. Coaxial cable (F-type) (Sample Illustration) Coaxial cable Coaxial (F-type) cable connects your ant...

28 Connecting Your TV Overview of cable types video, red for stereo right audio, and white for stereo left (or mono) audio. Component video cables (red/green/blue) (Sample Illustration) Component video cables Component video cables come in sets of three and are for use with video devices with compon...

29 Connecting Your TV Overview of cable types Dual-wand IR blaster cable Connect the dual-wand IR blaster cable to the IR blaster terminal to control infrared remote controlled devices from the TV. Optical audio cable (Sample Illustration) Optical audio cable Optical audio cable connects receivers w...

30 Connecting Your TV Connecting an antenna, satellite receiver, and cable TV box Crossover LAN cable connects the TV directly to a computer, see “Connecting the TV directly to a computer without an Internet connection” on page 42 . About the connection illustrations You can connect different types ...

31 Connecting Your TV Connecting DVD to ColorStream ® or VCR to composite video To view the VCR or camcorder video: Turn On the VCR or camcorder video. Select VIDEO input source on the TV.* *To select the video input source, press the INPUT button on the remote control, see “Selecting the video inpu...

32 Connecting Your TV Connecting remote IR devices ❖ If your DVD player or satellite receiver does not have component video, connect a standard A/V cable to the AUDIO/VIDEO terminal. If your DVD player has HDMI ® video, see “Connecting an HDMI® or DVI device to the HDMI® input” on page 35 . When you...

33 Connecting Your TV Connecting remote IR devices ❖ Dual-wand IR blaster cable (see “Dual-wand IR blaster cable” on page 29 ) ❖ Other cables as required to connect the device(s) to the TV (see “Overview of cable types” on page 27 ) See the remote IR blaster setup section. To connect the IR blaster ...

34 Connecting Your TV Connecting a digital audio system To control the device(s): Point the TV remote control toward the front of the TV and press the button for the desired function. The signal passes from the remote control through the TV to the device via the IR Blaster cable. For more informatio...

35 Connecting Your TV Connecting an HDMI® or DVI device to the HDMI® input use with an external Dolby Digital decoder or other external audio system with optical audio input. You will need an Optical audio cable (Use an optical audio cable that has the larger “TosLink” connector and not the smaller ...

36 Connecting Your TV Connecting an HDMI® or DVI device to the HDMI® input uncompressed digital video from a DVI (Digital Visual Interface) source device. This input is designed to accept HDCP (High- Bandwidth Digital-Content Protection) program material in digital form from EIA/CEA-861-D– compliant...

37 Connecting Your TV Using the TV remote and HDMI® CEC Control to control other more information, see “Selecting the video input to view” on page 86 . To connect a DVI device, you will need : ❖ HDMI ® to DVI adapter cable For proper operation, the length of an HDMI ® to DVI adapter cable should not...

38 Connecting Your TV Connecting an HDMI® audio system To connect an audio receiver and playback devices, you will need HDMI ® cables, see “HDMI ® cable (with HDMI Logo)” on page 28 . If several devices are connected, HDMI ® CEC Control feature may not operate properly, see “HDMI ® CEC Control input...

39 Connecting Your TV Connecting a computer You will need and HDMI ® cable. (Sample Illustration) L6200U/L7200U Series— Connecting to HDMI ® ARC HDMI ® 's ARC (Audio Return Channel) feature This feature enables the audio signal of the TV to be sent to an AV amplifier via the HDMI ® cable. It will no...

40 Connecting Your TV Connecting a computer Connecting a computer to the TV’s PC IN terminal: When connecting a computer to the PC IN terminal on the TV, use an analog RGB (15-pin) computer cable and a PC audio cable. For more information, see “Overview of cable types” on page 27 . (Sample Illustrat...

41 Connecting Your TV Connecting a computer ❖ The PC audio input terminal on the TV is shared with the HDMI 4 and ColorStream ® HD2 terminal. For configuration information, see “Setting the computer audio” on page 103 . ❖ Some computer models cannot be connected to this TV. ❖ If the computer has a c...

42 Connecting Your TV Connecting to a home network For more information, see “Overview of cable types” on page 27 . (Sample Illustration) L6200U/L7200U Series—Connecting to an HDMI ® terminal The supported signal formats are VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (6...

46 Chapter 3 Using the Remote Control Controlling other devices The TV’s remote control can operate other devices as described in the IR Blaster section on page 55. Installing batteries To install batteries: 1 Pull up to open the cover. (Sample Illustration) Removing the battery cover 2 Install two ...

47 Using the Remote Control Installing batteries Use carbon zinc batteries or alkaline batteries. (Sample Illustration) installing the batteries 3 Slide on the cover. Do not expose batteries to excessive heat such as sunshine, fire, etc. ❖ Every time you change the batteries, you must reprogram the ...

48 Using the Remote Control Remote control effective range Remote control effective range 1 For optimum performance, aim the remote control directly at the TV and make sure there are no obstructions between the remote control and the TV. (Sample Illustration) Remote control effective range 16.4 ft (...

49 Using the Remote Control Learning about the remote control Learning about the remote control Only the buttons used to operate the TV are described in this section. For the HDMI ® CEC Control functions, see “Using HDMI ® CEC Control” on page 97 . (Sample Illustration) Remote control overview The L...

51 Chapter 4 Initial Setup and Menu Initial setup When you first turn on or reset the TV, the Initial Setup window appears. ❖ You can stop Initial Setup by pressing the EXIT button. However, if you do not finish Initial Setup, the Initial Setup screen will appear every time you turn on your TV. To f...

52 Initial Setup and Menu Initial setup Performing the initial setup 1 Menu Language/Country Select a language and country. Press OK . (Sample Illustration) Selecting Menu Language/Country 2 Time Zone Select a time zone. (Sample Illustration) Selecting Time Zone 3 Daylight Saving Time Select On or O...

53 Initial Setup and Menu Initial setup 5 ANT/CABLE To select Antenna , first select Antenna . Then select Next. (Sample Illustration) Selecting Antenna To select Cable , first select Cable . Then select Next . (Sample Illustration) Selecting Cable If you do not want to scan channels, you do not nee...

55 Initial Setup and Menu IR Blaster Setup 4 Scan again. IR Blaster Setup During the Initial Setup, the IR Blaster screen will appear with the message, “IR Blaster setup will now begin. If you wish to skip, please select Skip.” To start the IR Blaster setup, select Next on the screen, or to skip the...

56 Initial Setup and Menu IR Blaster Setup If a model has more than one Code Set, a message will appear stating “This model has more than one Code Set. Please select and test your preferred Code Set.” You will need to choose a code set using the ( / arrow) buttons and perform the Test option to ensu...

57 Initial Setup and Menu IR Blaster Setup If Audio is selected as the device type, the volume option is active. However if another device (other than Audio) is selected, then this option is not available and grayed out. 10 After setting up all the options for the device, it is important to test the...

58 Initial Setup and Menu Network Setup ❖ 1 sec 3 Select the Test button. A message screen will appear asking you “Was your device changed from one channel to another by the IR blaster? If not, please check your configuration.” If the test failed, a “Test Failed” message will appear on the screen. 4...

59 Initial Setup and Menu MediaGuide Setup 1 Use the ( / arrow) buttons to select Wired or Wireless network. If you select Wired, proceed to the Network Connection Test (Step 3). If you selected Wireless network, please proceed to the following step. 2 Using the ( / arrow) buttons, select the type o...

61 Initial Setup and Menu Navigating the menu system Support Information ❖ When the “Support Information” screen appears, press the OK button . Refer to this information if there is a problem and you need to contact Customer Support. To find help, the following operation can be performed at any time...

62 Initial Setup and Menu Main menu layout Main menu layout To open the main menus in the table below, press the MENU button on the remote control or TV control panel. 1st Layer 2nd Layer 3rd Layer Page GET HELP Software Licenses page 141 Software Upgrade page 140 System Information page 107 eMANUAL...

63 Initial Setup and Menu Quick Menu Quick Menu Quick menu helps you access some options more quickly. Press the QUICK button to display the Quick menu and press the ( / )buttons to select an option. Quick menu items differ depending on the current mode.   Quick Menu Item Page Picture Mode page 79 3...

64 Chapter 5 Setting up your TV How to navigate the menu ❖ Press the MENU button. Select SETTINGS , Main menu, Submenu, and then press the OK or EXIT button. Changing initial settings From Quick Setup: 1 Press the MENU button. 2 Select SETTINGS , SETUP , Quick Setup , and then press the OK button. A...

65 Setting up your TV How to navigate the menu 3 Press the ( / arrow) buttons to select Yes . 4 Press the OK button. To change settings, see “Initial setup” on page 51 . Individual settings Menu Language You can choose from three different menu language settings (English, Français, and Español). The...

67 Setting up your TV How to navigate the menu To tune to channels not stored in memory, use buttons 0–9 and the DASH button on the remote control. 1 Press the MENU button. 2 Select SETTINGS , SETUP , Auto Tuning , and then press the OK button. A confirmation screen appears. 3 Press the OK button to...

68 Setting up your TV How to navigate the menu Skipping channels To prevent a channel from being viewed, you can set it to be skipped. 1 Press the MENU button. 2 Select SETTINGS , SETUP , TV Settings , and then press the OK button. 3 Press the ( / arrow) buttons to select Channel Options , and then ...

69 Setting up your TV How to navigate the menu 2 Select SETTINGS , PREFERENCES , AV Connection , and then press the OK button. 3 Press the ( / arrow) buttons to select Input Labeling . 4 Press the OK button. 5 Press the ( / arrow) buttons to select the item you wish to skip. Then press the RED butto...

70 Setting up your TV How to navigate the menu Labeling video inputs The input labels are shown in the input selector and banner displays. You can label video inputs according to the devices you have connected to the TV. 1 Press the MENU button. 2 Select SETTINGS , PREFERENCES , AV Connection , and ...

71 Setting up your TV How to navigate the menu Auto Input settings options for each MODE SELECT button: The TV mode select button will be restricted to the ANT/CABLE input. To set Auto Input 1 Press the MENU button. 2 Select SETTINGS , PREFERENCES , Mode Select Key Setup , and then press the OK butt...

72 Chapter 6 Basic F eatures Viewing 3D images Before using the 3D function, note the following: In addition to compatible 3D glasses, viewing 3D programming requires the following (not included): ❖ Compatible 3D playback device or 3D source. ❖ 3D capable HDMI ® cable. If you wish to obtain extra 3D...

73 Basic features Viewing 3D images Health precautions: ❖ Due to the possible impact on vision development, viewers of 3D programming should be age 6 or above. Children may be more susceptible to health effects from viewing 3D images and should be closely supervised. ❖ Some viewers may experience a ...

74 Basic features Using 3D functions Watching the TV: ❖ Proper 3D effects or 3D-to-2D conversion results may not be obtained depending on the received 3D content. ❖ 3D effect and image quality may vary depending upon content quality and display device capability/ functionality/settings. ❖ Wear the 3...

76 Basic features Using 3D functions Switching display mode or selecting 3D format There are four TV viewing modes: 3D signals can be sent in one of three formats: * This format cannot be selected manually. ❖ If the right and left images are the same in Native mode, select SBS. ❖ If the top and bott...

77 Basic features Using 3D functions When viewing 3D mode or 2D to 3D mode, pressing the 3D button changes the viewing mode to Native mode. The 3D mode may not be available with certain features. Switching to 3D mode 1 Set 3D Auto Start to 3D . 2 Press the 3D button and select 3D while viewing 2D mo...

78 Basic features Using 3D functions Selecting 3D format from the Quick menu in 3D mode 1 Press the QUICK button. Select 3D Settings , and then press the OK button. 2 Press the ( / arrow) buttons to select 3D Format Select , and then press the OK button. 3 Press the ( / arrow) buttons to select Side...

79 Basic features Using 3D functions Switching to 2D mode 1 Set 3D Auto Start to 2D . 2 Press the 3D button while viewing 3D mode. * Correct 2D image. Selecting 2D format from the Quick menu in 2D mode 1 Press the QUICK button. Select 3D Settings , and then press the OK button. 2 Press the ( / arrow...

80 Basic features Using 3D functions * Correct 2D image. Take off the 3D glasses in 2D mode Switching to Native mode Press the 3D button while viewing 3D mode. Press the 3D button while viewing 2D to 3D mode. When 3D format signal with 3D Auto Detect Information is received, it is not possible to sw...

81 Basic features Setting the 3D PIN code To switch 2D to 3D mode ❖ Press the 3D button and select 2D to 3D while viewing 2D or Native mode. When using ATV, Video, ColorStream HD, Internet, or PC, the viewing mode can be changed to 2D to 3D mode by pressing 3D. Setting the auto start mode This contr...

82 Basic features Setting the 3D PIN code the PIN code cannot be set to “0000.” Change or delete your PIN code 1 Press the MENU button. 2 Use the ( / arrow) buttons to select 3D , and then press the OK button. 3 Press the ( / arrow) buttons to select 3D PIN . 4 Press the number buttons to enter your...

83 Basic features Setting the 3D PIN code 6 Press the ( / arrow) buttons to select On or Off . Setting the 3D Lock When this feature is set to On, you must enter your 3D PIN code to change the display mode to 3D mode or 2D to 3D mode. 1 Press the MENU button. 2 Use the ( / arrow) buttons to select 3...

84 Basic features Setting the 3D PIN code 1 Press the MENU button. 2 Use the ( / arrow) buttons to select 3D , and then press the OK button. 3 Press the ( / arrow) buttons to select 3D Safety Settings , and then press the OK button. 4 Enter your 4-digit 3D PIN code. 5 Press the ( / arrow) buttons to...

85 Basic features Tuning Channels Switching left and right images The left and right images of the glasses can be swapped. If 3D images look blurry, switch the left and right sides of the 3D image. 1 Press the QUICK button to open the Quick menu. 2 Press the ( / arrow) buttons to select 3D Settings ...

86 Basic features Selecting the video input to view To temporarily program the CH RTN button with a particular channel: 1 Tune to the channel you wish to program to the CH RTN button. 2 Press and hold the CH RTN button for approximately 4 seconds until the message “Memorized” appears. The channel ha...

87 Basic features Using closed captions ❖ You can label the video input sources according to the specific devices you have connected to the TV, see “Labeling video inputs” on page 70 . ❖ You can skip sources, see “Skipping video inputs” on page 68 . ❖ Inputs that are set to be skipped will be skippe...

89 Basic features Using closed captions To view text: Press the ( / arrow) buttons to highlight T1 , T2 , T3 , or T4 . (Sample Illustration) Captions - text If text is not available in your area, a black rectangle may appear on the screen. You can remove this rectangle by setting Closed Captions Dis...

90 Basic features Using closed captions To customize the closed captions: 1 Press the MENU button. Select SETTINGS , SETUP , TV Settings , and then press the OK button. 2 Press the ( / arrow) buttons to select Closed Captions , and then press the OK button. 3 Press the ( / arrow) buttons to select D...

91 Basic features Using parental controls Entering a new PIN code 1 Press the MENU button. Select SETTINGS , PREFERENCES , Parental PIN , and then press the OK button. 2 Use the number buttons to enter a 4-digit number, and then confirm the code. The PIN code cannot be set to “ 0000 ”. Changing or d...

92 Basic features Using parental controls The V-Chip feature in this TV supports the U.S. V-Chip system only. 1 Press the MENU button. Select SETTINGS , PREFERENCES , Parental Control and Locks , and then press the OK button. 2 Enter your 4-digit PIN code. 3 Press the ( / arrow) buttons to highlight...

93 Basic features Using parental controls 5 Press the ( / arrow) buttons to select Edit Rating Limits , and then press the OK button. The Edit Rating Limits screen appears. 6 Select Alt RS , and then press the OK button. The Edit Alternate Ratings screen appears. ❖ The Alt RS button is only availabl...

95 Basic features Locking specific channels Displaying ratings To display the rating of the program you are watching, press the INFO button on the remote control. Unlocking programs If you try to tune to a program that exceeds the rating limits you have set, the TV will enter program lock mode and a...

96 Basic features Locking specific channels Locking video inputs You can lock video inputs and channels 3 and 4. You cannot view the input sources or channels until you unlock the inputs by entering the PIN code. 1 Press the MENU button. Select SETTINGS , PREFERENCES , Parental Control and Locks , a...

97 Basic features Using HDMI ® CEC Control ❖ A message appears when 10 minutes, 3 minutes, and 1 minute are remaining. ❖ If the TV loses power with time remaining, the TV will enter Input Lock mode when power is restored (as if the GameTimer had been activated). You must deactivate the Input Lock, s...

98 Basic features Using HDMI ® CEC Control To set HDMI ® CEC Control Setup 1 Press the MENU button. Select SETTINGS , PREFERENCES , HDMI ® CEC Control Setup , and then press the OK button. 2 Press the ( / arrow) buttons to highlight Enable HDMI CEC Control . 3 Press the ( / arrow) buttons to select ...

99 Basic features Using HDMI ® CEC Control These functions depend on the connected devices. HDMI ® CEC Player Control menu functions 1 Press the QUICK button to open the Quick menu. 2 Select HDMI ® CEC Player Control , and then press the OK button. 3 Press the ( / arrow) buttons to select the item y...

100 Basic features Using HDMI ® CEC Control These functions depend on the connected devices. The HDMI ® CEC Player Control item is not available under the following conditions: ❖ A non-HDMI ® input is selected ❖ The Enable HDMI ® CEC Control item is set to Off ❖ The connected HDMI ® CEC device is no...

101 Basic features Using the HDMI® RGB Range feature Other HDMI ® CEC Control functions When Enable HDMI ® CEC Control and all items in the HDMI ® CEC Control Setup menu are set to On, the following functions will be enabled: When you turn on the amplifier, change its input source, or adjust the sou...

102 Basic features Viewing the HDMI® signal information If your HDMI ® connection is capable of 1080p and/or your TV is capable of refresh rates greater than 60 Hz, you will need a High Speed HDMI ® cable. Conventional HDMI ® / DVI cables may not work properly with this mode. Select the appropriate ...

103 Basic features Using your computer with the TV 3 Press the ( / arrow) buttons to select PC Settings , and then press the OK button. If a computer is not connected or there is no PC input signal, this menu will not be available. 4 Press the ( / arrow) buttons to select an item. 5 Press the ( / ar...

104 Basic features Setting the timer to turn on the TV Setting the timer to turn on the TV You can set the on timer to turn on the TV to a preset channel or input at a preset time. To activate the timer: 1 Press the MENU button. Select TIMERS , On Timer , and then press the OK button. 2 Press the ( ...

105 Basic features Setting the sleep timer 2 Press the ( / arrow) buttons to select Enable On Timer . 3 Press the ( / arrow) buttons to select Off . Setting the sleep timer You can set the TV to turn off after a specific amount of time (maximum = 12 hours). Using the remote control: 1 Press the SLEE...

106 Basic features Setting No Signal Power Down Setting No Signal Power Down When an input's setting in this feature is set to On, The TV will automatically turn itself off after 15 minutes if no signal is detected. You can change each input's setting to Off: ANT/CABLE, Video 1, Video 2, ColorStream...

107 Basic features Viewing support information ❖ Channel Label (if set or received) ❖ Current display mode (Side by Side, Top and Bottom, or Frame Packing) ❖ Current display format (2D to 3D, or 3D to 2D) ❖ Input video format (3D appears when video format is 3D) To close the screen, press the INFO b...

108 Basic features Power failure ❖ Press the ( / arrow) buttons to select No , and then press the OK button. Power failure If power is lost while you are watching the TV, the Last Mode Memory feature automatically turns on the TV when power is restored.

109 Chapter 7 Picture and Sound Controls Selecting the picture size You can view many program formats in several picture sizes—Native, 4:3, Full, TheaterWide 1, TheaterWide 2, TheaterWide 3, Normal, and Dot by Dot. The picture size illustrations are examples only. The format of the image (in any of ...

110 Picture and Sound Controls Selecting the picture size ❖ Using these functions to change the picture size (i.e., changing the height/width ratio) for any purpose other than your private viewing may be prohibited under the Copyright Laws of the United States and other countries, and may subject yo...

111 Picture and Sound Controls Selecting the picture size 4:3 (Sample Illustration) Picture size - 4:3 Some program formats will display with sidebars and/or bars at the top and bottom. Full This setting is for viewing in the 16:9 (480i, 480p) source programs only. (Sample Illustration) Picture size...

112 Picture and Sound Controls Selecting the picture size TheaterWide 1 This setting is for viewing in 4:3 format programs. (Sample Illustration) Picture size - TheaterWide 1 The center of the picture remains close to its original proportions, but the left and right edges are stretched horizontally ...

113 Picture and Sound Controls Scrolling the picture Normal This setting is for viewing SVGA, XGA, WXGA, and SXGA sources. (Sample Illustration) Picture size - Normal This size is a non-stretched display. Some input signal formats will display with sidebars and/or bars at the top and bottom. Dot by ...

114 Picture and Sound Controls Using the Auto Aspect feature 2 Press the ( / arrow) buttons to select Picture Position , and then press the OK button. 3 Press the ( / arrow) buttons to select Vertical Position . 4 Press the ( / arrow) buttons to make the appropriate adjustments. The adjustment range...

115 Picture and Sound Controls Adjusting the picture Adjusting the picture Selecting the picture mode You can select your desired picture settings from the modes described below. PC mode is available for HDMI ® and PC inputs only (not displayed for other input sources). Game mode cannot be turned on...

117 Picture and Sound Controls Using the advanced picture settings features Using the advanced picture settings features Some of the Advanced Picture Settings features will not be available for adjustment when the Picture Mode is set to AutoView. Edge Enhancer The Edge Enhancer feature lets you adju...

119 Picture and Sound Controls Using the advanced picture settings features Cinema Mode This feature provides smoother motion and a crisper image. 1 Press the MENU button. Select SETTINGS , PICTURE , Advanced Picture Settings , and then press the OK button. 2 Press the ( / arrow) buttons to select C...

120 Picture and Sound Controls Using the advanced picture settings features The differences may not always be noticeable. For the best results, use lower settings, as picture quality may be greatly reduced if the setting is too high. If the picture mode is set to Game or PC, this feature is not avai...

121 Picture and Sound Controls Using the advanced picture settings features 6 Press the ( / arrow) buttons to adjust the level. The adjustment range is from 0 to 100. (Sample Illustration) Backlight adjustment window 7 Press the OK button to fix the adjustment. ❖ To cancel the adjustment when select...

122 Picture and Sound Controls Setting the expert picture settings 3 Press the ( / arrow) buttons to select a color. Press the ( arrow) button. 4 Press the ( / arrow) buttons to select Hue , Saturation , or Brightness . 5 Press the ( / arrow) buttons to adjust the setting. 6 Repeat Steps 3 through 5...

123 Picture and Sound Controls Setting the expert picture settings 3 Press the ( / arrow) buttons to select On . 4 Adjust picture settings. When the TV is in 3D mode, this feature is not available. RGB Filter This feature individually enables or disables the red, green, and blue components of the pi...

124 Picture and Sound Controls Locking the picture settings Setting Type You can adjust the white balance setting. 1 Press the MENU button. Select SETTINGS , PICTURE , Expert Picture Settings , and then press the OK button. 2 Press the ( / arrow) buttons to select White Balance , and then press the ...

125 Picture and Sound Controls Adjusting the audio Adjusting the audio Muting the sound Press the MUTE button to partially reduce (1/2 Mute) or turn off (Mute) the sound. Each time you press the MUTE button, the mute mode changes in the following order: 1/2 Mute, Mute, Volume, 1/2 Mute, etc. If the ...

126 Picture and Sound Controls Adjusting the audio Adjusting the range You can adjust bass and treble. 1 Press the MENU button. Select SETTINGS , SOUND , and then Bass or Treble . 2 Press the ( / arrow) buttons to adjust the range, and then press the EXIT button. Selecting the optical audio output f...

127 Picture and Sound Controls Adjusting the audio Audyssey Premium Television™ These televisions use a suite of technologies for better sound including: ❖ Audyssey EQ ® —provides clear, accurate and natural sound right out of the box. This technology ensures you enjoy your audio experience as much ...

128 Picture and Sound Controls Using the surround sound feature ❖ If Dynamic Range Control is set to On, this feature is automatically set to Off. ❖ This feature does not affect the audio signal output from the DIGITAL AUDIO OUT terminal. Audyssey ABX™ Audyssey ABX™ technology uses sophisticated dri...

129 Chapter 8 Advanced features Using your home network ❖ This TV can share videos, music, and photos across your home network and other connected products through the MediaShare feature. In order to do this, you will have to configure the network settings on your TV, see “ePORTAL MediaShare (Videos...

130 Advanced features Using your home network When using a Wireless network connection Wireless LAN and your Health Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. However, the level of energy emitted by Wireless LAN devices is much less than the electro...

131 Advanced features Setting up the Network Setting up the Network You can select the Network Type. 1 Press the MENU button. Select NETWORK > Network Setup , and then press the OK button. 2 Press the ( / arrow) buttons to highlight Network Type . 3 Press the ( / arrow) buttons to select Wired or...

132 Advanced features Setting up the Network 4 Press the ( / arrow) buttons to select PBC . 5 Press the ( arrow) button to select Start Scan , and then press the OK button. 6 Following the on-screen instructions, push the appropriate button on your AP. 7 When a screen reporting that “the setup has s...

133 Advanced features Setting up the Network Assisted Setup 1 Press the MENU button. Select NETWORK > Network Setup , and then press the OK button. 2 Press the ( / arrow) buttons to select Wireless Setup , and then press the OK button. 3 Press the ( / arrow) buttons to select Assisted Setup , and...

135 Advanced features Setting up the Network Settings are not saved if the BACK button is pressed before Done is selected. Wireless Information The settings configured in Wireless Setup can be confirmed. 1 Press the QUICK button. Select Wireless Information , and then press the OK button. 2 Press th...

136 Advanced features Setting up the Network Even if an AP for IEEE 802.11n is used when Encryption is set to WEP or TKIP, the Speed value might be low. We recommend that the Encryption setting are changed to AES (Under manual setup). Advanced Network Setup ❖ When the DHCP function of the router con...

137 Advanced features Setting up the Network 2 Press the ( / arrow) buttons to select Advanced Network Setup , and then press the OK button. 3 Press the ( / arrow) buttons to select IP Address Setup , and then press the OK button. 4 Select Auto Setup . Press the ( / arrow) buttons to select Off . 5 ...

138 Advanced features Setting up the Network 2 Press the ( / arrow) buttons to select Advanced Network Setup , and then press the OK button. 3 Press the ( / arrow) buttons to select DNS Setup , and then press the OK button. 4 Select Auto Setup . Press the ( / arrow) buttons to select On. Other items...

139 Advanced features Using the software keyboard 3 Press the ( / arrow) buttons to select MAC Address , and then press the OK button. Network Connection Test This function checks Internet connectivity. 1 Press the MENU button. Select NETWORK > Network Setup , and then press the OK button. 2 Pres...

140 Advanced features Performing a Software Upgrade 3 Repeat Step 1 and 2 until you have entered all desired text. 4 Press the BLUE button to save your settings and return to the previous screen. If the BACK button is pressed, changes are not saved and the software keyboard window is closed. Input o...

141 Advanced features Viewing the Software Licenses ❖ You will not be able to use the TV set while performing the upgrade. ❖ Do not turn off the TV during the upgrade. ❖ By upgrading, the factory default values may be changed. 2 Press the MENU button. Select GET HELP , Software Upgrade , and then pr...

142 Advanced features Using the SmartTV features Using the SmartTV features ❖ You need to connect to the Internet before using this feature, see “Setting up the Network” on page 131 . ❖ Certain services may not be currently available in your area. ❖ User registration or login may be required to use ...

143 Advanced features Using the SmartTV features ❖ MediaShare (Media Player): Connected Media Servers and USB devices ❖ The Internet Performing a Search You can perform a search using the SEARCH button on the remote control or the SearchAll bar on the ePORTAL page. 1 From the remote control, press t...

144 Advanced features Using the SmartTV features ePORTAL Apps The ePORTAL Apps can be used to display bonus content through content service providers such as: ❖ Netflix ® ❖ VUDU Apps™ ❖ VUDU Movies™ ❖ YouTube ® ❖ CinemaNow ® ❖ MediaGuide ❖ eMANUAL Certain services may not be available in your area. ...

145 Advanced features Using the SmartTV features ❖ The resolution of video content streamed from Netflix ® varies depending on the communication speed and bit-rate. ❖ Future upgrades can change the screens and messages displayed in the Netflix ® feature. ❖ Netflix ® is supported in the U.S. and Cana...

146 Advanced features Using the SmartTV features 1 Press the MENU button. Select NETWORK > Smart Apps Setup > VUDU Deactivation , and then press the OK button. 2 Press the ( / arrow) buttons to select Yes , and then press the OK button. If the VUDU™ icons are not shown in the ePORTAL, you may ...

147 Advanced features Using the SmartTV features ❖ YouTube™ content has been independently managed by YouTube™, LLC. ❖ Not all YouTube™ content that can be accessed by computer may be viewed with this TV. ❖ This TV may not be able to do some operations that computer can do. ❖ Depending on network en...

148 Advanced features Using the SmartTV features search for and browse your favorite sites, and find all the content you want, with simple, intuitive navigation. The web browser on this device: ❖ does not support platform-dependent technologies such as ActiveX. ❖ only supports preinstalled plug-ins....

149 Advanced features Using the SmartTV features 6 You can now browse websites on your TV using the ( / / / arrow) buttons on the remote control or by using the Wireless QWERTY keyboard. Select Mouse Emulation by pressing the GREEN button on the remote control to navigate with a generic USB wireless...

150 Advanced features Using the SmartTV features Adding Favorites Websites 1 Connect to the network. 2 Press the ePORTAL button on the remote control to access the ePORTAL page. Pressing the INTERNET button on the remote control will also launch the web browser. 3 Press the Navigation buttons to scr...

151 Advanced features Using the SmartTV features ❖ If using the on-screen keyboard, press the BLUE button to view the page. ❖ If using the USB/QWERTY keyboard, press the ENTER button to view the page. ePORTAL Messages You can create personal messages on your TV using the Messages feature. Launch the...

152 Advanced features Using the SmartTV features Edit an event 1 Select the Event in the Event list. Press OK . 2 The Edit Event window is displayed. You can change the date, event information, and repeat options. ePORTAL Favorite Sites You can access your favorite (“bookmarked”) Internet sites from...

153 Advanced features Using the SmartTV features ePORTAL Preferences Use ePORTAL Preferences to customize the look and feel of the ePORTAL. From Preferences, you can: ❖ Adjust the background by selecting different colors ❖ Edit favorite Apps by moving and selecting which favorites to show or hide ❖ ...

154 Advanced features Using the SmartTV features If you see an error message saying that the MediaGuide was not able to connect to the network, you should check your network connections before trying again. The step-by-step installation wizard will appear again after performing any of the following ...

155 Advanced features Using the SmartTV features ❖ Third party Internet services are not provided by Toshiba, may change or be discontinued at any time and may be subject to Internet service provider restrictions. Toshiba makes no warranties, representations, or assurances about the content, availab...

156 Advanced features Using the SmartTV features History, Episodes - For TV series only, Overview, Summary, Review, Cast & Crew, and others. Celebrity detail menus contain different items such as History, Overview, Biography, and Credits. The actual menus displayed on the detail screen vary depe...

157 Advanced features Using the SmartTV features 4 Select Yes and press the OK button. The TV will turn off automatically. You can also reset the MediaGuide from the MediaGuide from the setting menu. If the MediaGuide cannot launch or is not functioning correctly, reset the MediaGuide using the inst...

158 Advanced features Using the SmartTV features Basic operation Using MediaShare (Media Player) with a USB device When Auto Start is enabled, you will be asked if you want to start the MediaShare (Media Player) when a USB device is inserted. If Auto Start is disabled (or if you want to connect to a...

159 Advanced features Using the SmartTV features To select a file in the list of contents 1 Press the ( / / / arrow) buttons to select a file or folder. 2 Press the OK button to move to the next layer, or press the BACK button to return to the previous layer. To close the MediaShare (Media Player) ❖...

160 Advanced features Using the SmartTV features Viewing movie files Basic Playback 1 Select a file, see “To select a file in the list of contents” on page 159 . 2 Press the OK button or PLAY button to begin playback. Depending on the file size, it may take some time to start playback. 3 Press the S...

161 Advanced features Using the SmartTV features To set the repeat mode 1 Press the QUICK button. The current repeat setting appears. 2 Press the ( / arrow) buttons to select Off , All , or 1 . 3 Press the BACK button. The setting is effective until the TV is turned off. To display the file status i...

162 Advanced features Using the SmartTV features It may not be possible to use certain playback or display some files. In some cases certain files and servers may not support playback features, such as pause. Playing music files Basic Playback: 1 Select a file, see “To select a file in the list of c...

164 Advanced features Using the SmartTV features It may not be possible to use certain playback or display some files. In some cases certain files and servers may not support playback features, such as fast-forward. Viewing photo files Multi View mode This view mode allows you to search for photos i...

165 Advanced features Using the SmartTV features Single view mode is changed to Multi View mode when the BACK button is pressed. Slideshow mode This view allows you to watch a slideshow of the photos. In this mode, only files located in the selected directory appear. 1 To switch to Slideshow mode, p...

166 Advanced features Search The information may not correctly display depending on the content or media server. Certain processes may take some time to complete. File specifications: USB use: ❖ Data compatibility: JPEG Exif ver 2.2 ❖ File format: JPEG ❖ Maximum viewable resolution: 8192 x16384 ❖ Ma...

167 Advanced features Network Device Setup The search retrieval stops when content is being played. Network Device Setup In order to set the access the External Control Setup, Media Renderer Setup, or Device Name Setup, you must use the Network Device Setup menu. External Control Setup 1 Press the M...

168 Advanced features Network Device Setup Only the 0-9, dash (-), and capital A-Z characters may be used for the user name and password. Setting up the Media Renderer feature The TV can be configured as a Media Renderer. When operating as a Media Renderer, the TV displays content provided by a Medi...

169 Advanced features Network Device Setup 11 Press the ( / arrow) buttons to adjust to the desired volume. Press the OK button. 12 If you want to wake up the TV by using the Media Controller, press the ( / arrow) buttons to select Yes . Press the OK button. Device Name setup The device name as a Me...

170 Advanced features Network Device Setup 7 Press the OK button. The box is selected. To clear the selection, press the OK button. 8 Press the right arrow button to select Done . Press the OK button. ❖ You can select up to 8 Media Controllers. ❖ If you would not like to limit the Media Controllers ...

171 Chapter 9 Apps Collaboration Using Apps on a Tablet or Smartphone Toshiba provides three apps for tablets and smartphones: ❖ Toshiba A/V Remote App ❖ Toshiba Send & Play App ❖ Toshiba MediaGuide App These apps are available for compatible Toshiba equipment using compatible tablets and smartp...

172 Apps Collaboration Apps Control Profile ❖ Third party Internet services are not provided by Toshiba, may change or be discontinued at any time, and may be subject to Internet service provider restrictions. Toshiba makes no warranties, representations, or assurances about the content, availabilit...

174 Apps Collaboration Toshiba A/V Remote App 4 Press the OK button on the tablet or smartphone screen. (Sample Illustration) Toshiba A/V Remote App—Input PIN code screen Toshiba A/V Remote App The tablet and smartphone control apps provide multiple pages of options for maximum control. They include...

175 Apps Collaboration Toshiba MediaGuide TV listings The TV listings are displayed in a grid format, which is easily controlled by swiping up, down, left, and right with your finger. Movies/TV portal screen You can select from the Movie or the TV program Hotlist, their Portals, or the Reminders as ...

176 Chapter 10 Troubleshooting General troubleshooting Before calling a service technician, review this chapter or visit the Toshiba technical support Web site at support.toshiba.com for possible causes/solutions for the problem you are experiencing. Before you begin to troubleshoot any problem, fir...

177 Troubleshooting Picture problems Other problems. If your TV’s problem is not addressed in this Troubleshooting chapter or the recommended solution has not worked, use the Reset Factory Defaults procedure, see “Resetting to Factory Defaults” on page 107 . TV will not turn on. Ensure the power cor...

178 Troubleshooting Picture problems If Edge Enhancer does not achieve a sharper picture, change the Sharpness value to increase the sharpness level, see “Edge Enhancer” on page 117 . Video Input Selection problems. If the Input Selection window does not appear when you press the INPUT button on the...

179 Troubleshooting Sound problems ❖ The settings of Side Shared Audio and Rear Shared Audio may be not correct. Check the connections, see “Connecting a digital audio system” on page 34 . ❖ Turn off and unplug the TV from the AC wall outlet for a few seconds and plug it back in. Sound problems Chec...

180 Troubleshooting Closed caption problems persists, clear all channels from the channel list and reprogram channels into memory, see “Storing channels in memory (optional)” on page 66 . For additional information, see “TV stops responding to controls.” on page 176 . If the problem persists, use th...

181 Troubleshooting HDMI® problems If several devices are connected, the HDMI ® CEC Control feature may not operate properly. Read the instruction manual of the connected HDMI ® CEC device. HDMI ® problems HDMI ® cables. Ensure that HDMI ® cables with the ( ) Logo are used, see “Connecting an HDMI® ...

182 Troubleshooting Network problems Network Setup fails (Manual). Ensure that the TV IP address is not the same as any other device on the network. ❖ Example: IP address 192.168.0.100 and IP address 192.168.0.101 are different addresses on the same network. Make sure the TV IP address is on the sam...

183 Troubleshooting Wireless network problems Too many devices are connected. You cannot connect more than 32 sharing devices at one time. The media server is not turned On. The “server” is not a media server device. Check the firewall and streaming settings on the media server. Wireless network pro...

184 Troubleshooting Light Indicator Confirm that the contents of either the media server or the USB storage device are in formats that are supported by this TV, see “MediaShare (Media Player) specifications” on page 157 . Depending on the media server, access may be limited by the MAC address. Set t...

185 Troubleshooting If the problem persists after trying the solutions ❖ Power On failure. Turn off the TV and unplug the power cord. After approximately one minute, plug the power cord in again and turn on the TV. If the problem persists after trying the solutions In the U.S., visit TAIS Consumer S...

186 Appendix A Specifications ❖ This model complies with the specifications listed below. ❖ Designs and specifications are subject to change without notice. ❖ This model may not be compatible with features and/or specifications that may be added in the future. Television system Channel coverage NTSC...

187 Specifications Power source Power source 120 V AC, 60 Hz Power consumption Audio power Speaker type 42L6200U 0.8 A (maximum current) 0.3 W in Standby mode 47L6200U 0.9 A (maximum current) 0.3 W in Standby mode 55L6200U 1.0 A (maximum current) 0.3 W in Standby mode 47L7200U 1.2 A (maximum current...

188 Specifications Video/audio terminals Video/audio terminals Video/audio input ColorStream ® (component video) HD input HDMI ® input Digital audio output Optical type PC input 15-Pin D-sub Analog RGB Wireless connection Video 1 V (p-p), 75 ohm, negative sync. Audio 200 mV (rms) (-20dBFS) Video Y: ...

189 Specifications Dimensions with table stand Ethernet IEEE 802.3. USB Universal Serial Bus Specification, Revison 1.1. Universal Serial Bus Specification, Revison 2.0. Dimensions with table stand Mass (weight) Operating conditions 42L6200U Width 37.6” (954 mm) Height 25.0” (634 mm) Depth 8.4” (214...

190 Specifications Supplied accessories Supplied accessories ❖ Remote control with two size “AA” batteries ❖ L7200U model number: CT-90395 ❖ L6200U model number: CT-90408 ❖ Resource Guide ❖ Pedestal and hardware ❖ Warranty ❖ Wireless QWERTY keyboard (2x AAA batteries) ❖ Available with some models. N...

191 Specifications Acceptable signal formats for PC IN, HDMI®, and 3D Acceptable signal formats for PC IN, HDMI ® , and 3D PC IN signal formats ❖ The PC IN on this TV only accepts signal formats which are compliant with VESA-DMT as in the table below. Since some PCs input signals are different from ...

194 Specifications Operating the TV with combination buttons *Some content may not be supported depending on the input source format. Operating the TV with combination buttons You can directly operate the TV power, input switch, picture size switch, and picture mode switch by pressing a combination ...

196 Index Numerics 3D 2D from Quick menu 79 3D from Quick menu 78 3D lock 83 3D timer lock 83 adjusting 2D to 3D depth 84 auto start mode 81 button operation 76 change pin code 82 delete pin code 82 enable 3D timer 83 enter new pin code 81 forgotten pin code 82 functions 74 Native mode 80 selecting ...