Toshiba 42WP56A - Manuals

6 Intr oduction Use (continued) Introduction Important Safety Instructions (continued) Service If there is thunder or lightning, never touch the antenna cable or otherconnected cables. You may suffer an electric shock. Never cut, break, modify, twist, bunch up or bent the cord or applyexcessive forc...

7 Intr oduction Getting started Basic oper ation Equipment connections Ref er ence section V iewing teletext Using T V’s f eatur es Cleaning Always remove the power plug before cleaning. Do not use solvents such as benzine or thinner to clean the TV.– These solvents may distort the cabinet or damage...

8 Intr oduction Introduction Important information (continued) , Installation Important information (continued) About Static electricity • If you touch the surface of the screen panel, you may feel a slight electric shock. This is harmless. About using under the low temperature places • If you use t...

9 Intr oduction Getting started Basic oper ation Equipment connections Ref er ence section V iewing teletext Using T V’s f eatur es Getting started Exploring your new TV • You can operate your TV using the buttons on the right side panel or the remote control. The back panel and left side panel prov...

10 Getting Started Antenna input [8] TV back Before the connecting antenna, video and audio cables etc., remove the back terminal cover (squeeze tabs ( mark inthe figure below) and pull cover). RGB/PC input [38] WOOFER output terminal [28, 37] (1) VIDEO 1 input terminals [37] (C1) COMPONENT VIDEO IN...

11 Intr oduction Getting started Basic oper ation Equipment connections Ref er ence section V iewing teletext Using T V’s f eatur es Location of controls For the use of each control, see the pages in brackets. Getting started Learning about the remote control CALL [15, 17] Teletext on/off [33-35] To...

12 Getting Started Getting started Turning the TV on, Selecting a language • Connect the power cord to a wall outlet.• To reduce the risk of permanent after-image, the Picture shift function activates by default, so that picture will move in a counterclockwise direction. • To deactivate the Picture ...

13 Intr oduction Getting started Basic oper ation Equipment connections Ref er ence section V iewing teletext Using T V’s f eatur es A V c o n n e c t i o n P r o g r a m s o r t i n g M a n u a l t u n i n g OK OK A u t o t u n i n g OK L a n g u a g e SET UP MENU Back Watch TV EXIT English W O W B...

14 Getting Started Manual tuning Press the MENU button, then press the or button todisplay the SET UP menu.Press the or button toselect Manual tuning. Press the OK button to display the Manual tuning menu.Press the or button toselect the program position youwant to arrange. Press the OK button to di...

16 Getting Started Ex. : To swap channel ABCD (Prog.1) for channel MNOP (Prog.4): Press the MENU button, then press the or button todisplay the SET UP menu.Press the or button toselect Program sorting. Press the OK button to display the Program sorting menu. Press the or button toselect the channel ...

17 Intr oduction Getting started Basic oper ation Equipment connections Ref er ence section V iewing teletext Using T V’s f eatur es To alter the volume: Press the + or – button to raise or lower the volume. To mute the sound: Press the button. The word Sound mute appears on thescreen. Press the but...

18 Basic oper ation Basic operation Viewing the wide-screen picture format • This TV is capable of showing broadcasts in a number of formats. Depending on the type of broadcast being transmitted, you may select between Super live, Cinema, Subtitle, 14:9, Wide and 4:3. Picture size selection Press th...

19 Intr oduction Getting started Basic oper ation Equipment connections Ref er ence section V iewing teletext Using T V’s f eatur es Adjustment to the position of the picture may be made to suit yourviewing preferences. To adjust the picture position: Press the MENU button, then press the or button ...

20 Basic oper ation Picture quality adjustment Basic operation Picture quality adjustment To select the picture mode: You can select the picture quality instantly among three presetmodes and one user-set mode. • Press the button to select the desired picture quality. Dynamic, Standard, Mild andMemor...

22 Basic oper ation To select the color temperature Basic operation Picture quality adjustment (continued) You can change the tone of the picture by selecting from three presetcolor temperatures: Cool, Normal or Warm. Press the MENU button, then press the or button todisplay the PICTURE menu. Press ...

23 Intr oduction Getting started Basic oper ation Equipment connections Ref er ence section V iewing teletext Using T V’s f eatur es To adjust the color management You can adjust the picture color quality by selecting from 6 basecolor adjustments : Red, Green, Blue, Yellow, Magenta, Cyan. From the P...

24 Basic oper ation Setting the MTS mode: Auto mode The MTS Auto mode automatically recognize stereo/bilingualprograms depending on the broadcast signal. Press the MENU button, then press the or button todisplay the SOUND menu. Press the or button toselect MTS, then press the or button to select Aut...

25 Intr oduction Getting started Basic oper ation Equipment connections Ref er ence section V iewing teletext Using T V’s f eatur es DVD MENU P P 2 1 3 5 4 6 8 7 9 VCR TV DVD 0 OK CALL M E N U EXIT A B C D 1 0 S t e r e o A B C D 1 0 D u a l D u a l 1 S t e r e o Sound to be heard Display NICAM Germ...

26 Basic oper ation Basic operation Sound adjustment (continued) To select the audio output With the Audio output function “Variable”, you can use the TV’sremote controller to adjust the sound volume of the external audiosystem connected (see page 37). To select the sound volume from AUDIO OUT termi...

27 Intr oduction Getting started Basic oper ation Equipment connections Ref er ence section V iewing teletext Using T V’s f eatur es To use the WOW surround sound DVD MENU P P 2 1 3 5 4 6 8 7 9 VCR TV DVD 0 OK CALL M E N U EXIT B a l a n c e T r e b l e B a s s D u a l M T S SOUND 1 / 2 MENU Back Wa...

29 Intr oduction Getting started Basic oper ation Equipment connections Ref er ence section V iewing teletext Using T V’s f eatur es To select input source: Press and hold the button or press the OK button on the remote control until the videoinput mode list appears on thescreen, then press the or b...

30 Using T V’s f eatur es Press the MENU button, then press the or button todisplay the TIMER menu. Press the or button toselect the required timer mode(On timer or Sleep timer (Turnoff the TV)). Press the Number buttons (0-9), or button to set the On or Off delay time, e.g. on in 30 minutes and pro...

31 Intr oduction Getting started Basic oper ation Equipment connections Ref er ence section V iewing teletext Using T V’s f eatur es Using TV’s features Long life setting • The Long life setting allows you to prevent or mitigate the permanent after-image on the screen. See page 7 for the detail of t...

32 V iewing teletext To select Teletext mode: Select a channel position with the desired teletext service. Press the MENU button, then press the or button todisplay the FUNCTION menu. Press the or button toselect Teletext. Press the or button to select FAST or LIST mode. Viewing teletext Teletext – ...

33 Intr oduction Getting started Basic oper ation Equipment connections Ref er ence section V iewing teletext Using T V’s f eatur es Viewing teletext About Teletext Teletext general information DVD MENU P P 2 1 3 5 4 6 8 7 9 VCR TV DVD 0 OK CALL M E N U EXIT button: Pressing the button once will bri...

34 V iewing teletext DVD MENU P P 2 1 3 5 4 6 8 7 9 VCR TV DVD 0 G Y B R OK CALL M E N U EXIT 1 0 0 S p o r t 1 4 : 5 7 : 5 5 S w i m m i n g R a c i n g B a s e b a l l Fo o t b a l l 1 0 0 T E X T M 0 0 1 4 : 5 8 : 5 5 1 0 0 2 0 0 3 0 0 4 0 0 1 0 0 T E X T M 0 0 1 4 : 5 8 : 5 9 1 0 0 2 5 0 3 0 0 4...

35 Intr oduction Getting started Basic oper ation Equipment connections Ref er ence section V iewing teletext Using T V’s f eatur es Viewing teletext Teletext – Control buttons • Below is an introduction to the teletext buttons on your remote control and their functions. Teletext buttons on the remo...

36 Equipment connections Equipment connections Side connections • You can connect a wide variety of auxiliary equipment via the terminals located on the left side of the panel (2). Connection example Please always refer to the owner ’s manual of the equipment to be connected for full details. • To s...

37 Intr oduction Getting started Basic oper ation Equipment connections Ref er ence section V iewing teletext Using T V’s f eatur es Equipment connections Back connections Connection example Computer DVD video player (with component video outputs) VCR (Recording) Audio system (see page 26, 27) Woofe...

38 Equipment connections Equipment connections Connecting a computer • Before connecting PC and audio cables, remove the back terminal covers (see page 10).• An analog RGB (15 pin) computer cable can be connected. To connect a computer Connect a PC cable from the computer to the RGB/PC terminal on t...

39 Intr oduction Getting started Basic oper ation Equipment connections Ref er ence section V iewing teletext Using T V’s f eatur es Equipment connections PC setting • This mode may not be available for some signals or if no signal is received.• In the PC input mode, you cannot select the Color, Tin...

40 Equipment connections Equipment connections PC setting (continued) • If the clock phase, which synchronize the PC signal and Plasma display, is not optimized, the picture will blur. This function enables you to adjust clock phase and display a clear picture. • If the sampling clock does not synch...

41 Intr oduction Getting started Basic oper ation Equipment connections Ref er ence section V iewing teletext Using T V’s f eatur es Equipment connections Connecting an HDMI and a DVI device • This TV is not intended for connection to and should not be used with a PC.• When turnning on your electron...

42 Ref er ence section Reference section Troubleshooting • Before calling a service technician, please check the following table for a possible cause of the symptom and some solutions. Symptom and solution Symptom Solution TV will not turn on • Make sure the power cord is plugged in, then press . • ...

43 Intr oduction Getting started Basic oper ation Equipment connections Ref er ence section V iewing teletext Using T V’s f eatur es Broadcast transmission systems of each country or region Area Country or region System Color Sound Bahrain, Kuwait, Israel, Oman, Qatar, United Arab Emirates, Yemen, e...

44 Ref er ence section Plasma color television (continued) COMPONENT VIDEO INPUT 480i, 480p, 576i, 576p, 720p (50/60 Hz), 1080i (50/60 Hz) terminals (the signal format) (These signal formats are converted to match the number of pixels of the plasmapanel.) Color system PAL, SECAM, NTSC 3.58/4.43 Aspe...