Toshiba 22LV505C - Manuals

Introduction 5 Antenna discharge unit (NEC Section 810-20) Antenna lead-in wire Grounding conductors (NEC Section 810-21) Ground clamps Power service grounding electrode system (NEC Art 250 Part H) Ground clamp Electric service equipment Installation (cont. from previous page) 26) Always make sure t...

Introduction 6 Precautions Choosing a location for your LCD TV ■ Retractable pedestal stand and locating the LCD TV Observe the following safety precautions: 1) Ensure that unpacking and transfer of the unit is carried out by two or more people. 2) Put the LCD TV on a large level area in a recumbent...

7 Introduction On handling discs Do not touch the playback side of the disc. For example, handle the disc so that it is shown in fi gure below. Do not attach paper or tape to discs. On cleaning discs Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc from the cent...

9 Introduction Contents Introduction SAFETY INSTRUCTIONS ................................ 4Precautions....................................................... 6Notes on discs .................................................. 7Contents ........................................................... 9Iden...

10 Introduction Identification of controls Speaker Front POWER indicator 21 Remote sensor 13 Side Left Side Disc slot 40 EJECT button 41 CHANNEL 26 PLAY button 40 VOLUME (+/–) buttons 26 CHANNEL 26 ■ STOP button 40 MENU button 22 56 INPUT/ENTER button 16 POWER button 21 Illustration of 19LV505C Illu...

11 Introduction Rear AC INPUT 20 HEAD PHONE jack 27 COLORSTREAM HD IN jacks 17 VIDEO/GAME IN jack 16 17 PC MONITOR IN jack 20 PC AUDIO IN jack 20 HDMI IN jack 19 COAXIAL DIGITAL AUDIO OUT jack 18 19 Antenna jack 14 15 Illustration of 19LV505C 50S0301A.indb 11 50S0301A.indb 11 2/5/08 5:58:27 PM 2/5/0...

12 Introduction SLOW ( ) button Direction buttons ( / / / ) EJECT button 41 DISPLAY button Numbered buttons (0-9) 49 27 60 SUBTITLE button 48 INPUT button 16 ZOOM button 43 MENU button 22 SETUP button 56 46 PLAY MODE button 45 49 PLAY button 40 PAUSE button 41 TOP MENU button 47 RETURN button GAME b...

13 Introduction Replace the compartment cover. Install two “R03/AAA” batteries (supplied), paying attention to the polarity indicated in the battery compartment. Open the battery compartment cover in the direction of the arrow. 1 2 3 • Aim the remote control at the remote sensor and press control bu...

Connections 14 75 ohm coaxial cable(not supplied) 300-75 ohm matchingtransformer (not supplied) 300-75 ohm matchingtransformer (not supplied) UHF 300 ohmtwin-lead wire(not supplied) VHF 300 ohmtwin-lead wire(not supplied) UHF 300 ohmtwin-lead wire(not supplied) VHF 75 ohm(not supplied) Antenna jack ...

Connections 15 For basic cable service not requiring a converter/descrambler box, connect the Cable TV 75 ohm coaxial cable directly to the Antenna jack on the back of the TV/DVD. 75 ohmcoaxial cable If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels ...

Connections 16 To playback from the VCR, connect the VCR to the TV/DVD as shown.Select the “Video” by pressing INPUT repeatedly. You can enjoy playing a TV game on the screen by adjusting to the suitable brightness for your eyes. 1. Connect a TV Game to the TV/DVD. 2. Select the Game mode by pressin...

Connections 17 Connecting to an optional equipment with S-video output If you connect a VCR with an S-Video cable to the S-VIDEO IN jack on the left side of the TV/DVD, you must also connect the audio cables to the AUDIO IN jacks as shown below. The S-Video cable only carries the video signal. The a...

Connections 18 Dolby Digital Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs encoded via the Dolby Digital recording system wi...

Connections 19 Amplifi er equipped with a Digital audio input To COAXIAL type digital audio input 75 Ω coaxial cable (not supplied) Connecting to an amplifi er equipped with a digital audio input 2 channel digital stereoYou can enjoy the dynamic sound of 2 channel digital stereo by connecting an amp...

Connections Connecting to optional equipment (Continued)/Power source Connections 20 Power source Note: Never connect the AC line cord plug to other than the specified voltage (120V 60Hz). Use the attached power cord only. If the polarized AC cord does not fit into a non-polarized AC outlet, do not ...

21 Basic setup Basic setup Auto Setup Auto Setup The Auto Setup function helps to install your TV/DVD easily.It leads you the Language selection, Air/Cable selection and Automatic channel search.IMPORTANT: Make sure that the antenna or cable TV system connection is made! POWER EXIT/CANCEL / / / ENTE...

22 Basic setup Setting the language Setting the language This TV/DVD can display the on screen language in English, French or Spanish.Select the language you prefer fi rst, then proceed with the other menu options. EXIT/CANCEL 1 To turn on the TV/DVD, press POWER. POWER indicator on the front of the...

23 Basic setup / / / To memorize channels This TV/DVD is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV/DVD ʼ s memory. To use this TV...

24 Basic setup Add/Delete channel You can select the channel that you want to skip. 1 Press MENU in the TV mode. Press ▲ or ▼ to select “Channel”, then press ▶ or ENTER. Picture Audio Channel Setup Main Menu : Select ENTER:Set 2 Press ▲ or ▼ to select “Add/Delete”, then press ▶ or ENTER. : Select EN...

25 Basic setup Adding Channel If you find a new channel unregistered, you can add the new channel into the channel memory. 1 Tune in the new channel. 2 Press MENU. Press ▲ or ▼ to select “Channel”, then press ▶ or ENTER. Picture Audio Channel Setup Main Menu : Select ENTER:Set 3 Press ▲ or ▼ to sele...

26 TV operation 1 To turn on the TV/DVD, press POWER . (POWER indicator on the front of the unit changes green. It may take approx. 10 seconds for a picture to appear on screen.) 2 Adjust the volume level by pressing VOL + or – . The volume level will be indicated on the screen by orange bars. As th...

27 TV operation TV operation (continued) ■ DISPLAY Press DISPLAY to display the current information on the screen. When the TV/DVD receives a digital signal, the digital information will appear. 62-001 HDTV Moving Picture1 CH-1 Digital Cable No Program Information is available Sleep Timer Off Englis...

28 Labeling channels 1 Press MENU in the TV mode. Press then press ▲ or ▼ to select “Channel” menu, then press ▶ or ENTER. Picture Audio Channel Setup Main Menu : Select ENTER:Set 2 Press ▲ or ▼ to select “Ch Label”, then press ▶ or ENTER. The “Ch Label” menu will appear. : Select ENTER:Set Channel ...

TV operation 29 Labeling video inputs The Video Label feature allows you to label each input source for your TV/DVD. / / / MENU EXIT/CANCEL ENTER Labeling video inputs 1 Press MENU in the TV mode. Press ▲ or ▼ to select “Setup”, then press ▶ or ENTER. Picture Audio Channel Setup Main Menu : Select E...

TV operation 30 4 Press ▲ or ▼ to select “Analog Caption” or “Digital Caption”, then press ◀ or ▶ to select the desired Closed Caption mode. When you select “Analog Caption”, you can choose C1, C2, C3, C4, T1, T2, T3 and T4.When you select “Digital Caption”, you can choose from CS1, CS2, CS3, CS4, C...

TV operation CC advanced 1 Press MENU in the TV mode. Press ▲ or ▼ to select “Setup”, then press ▶ or ENTER. Picture Audio Channel Setup Main Menu : Select ENTER:Set 2 Press ▲ or ▼ to select “Closed Caption”, then press ▶ or ENTER. The Closed Caption menu will appear. Video Label >> Backlight ...

32 TV operation Adjusting the picture preference 1 Press MENU in the TV mode. Press ▲ or ▼ to select “Picture”, then press ▶ or ENTER. Picture Audio Channel Setup Main Menu : Select ENTER:Set 2 Press ▲ or ▼ to select “Picture Preference”. On PC Setting >> DNR On Picture Picture Setting >>...

33 TV operation Viewing the wide-screen picture formats 1 Press MENU. Press ▲ or ▼ to select “Picture”, then press ▶ or ENTER. 2 Press ▲ or ▼ to select “Picture Size”, then press ▶ or ENTER to display Picture Size menu. Press ▲ / ▼ or corresponding Number button (0-4) to select the desired picture s...

34 TV operation 1 Press MENU in the TV mode. Then press ▲ or ▼ to select “Picture”, then press ▶ or ENTER. Picture Audio Channel Setup Main Menu : Select ENTER:Set 2 Press ▲ or ▼ to select “DNR”. Picture Preference Sports Picture Size >> Film Mode On Picture Picture Setting >> PC Setting...

35 TV operation 1 Press INPUT, then press ▲ / ▼ or 4 to select the PC mode. 2 Press MENU. Then press ▲ or ▼ to select “Picture”, then press ▶ or ENTER. Picture Audio Channel Setup Main Menu : Select ENTER:Set 3 Press ▲ or ▼ to select “PC Setting”, then press ▶ or ENTER. PC Setting >> DNR Off P...

36 TV operation 1 Press MENU in the TV mode. Press ▲ or ▼ to select “Audio”, then press ▶ or ENTER. Picture Audio Channel Setup Main Menu : Select ENTER:Set 2 Press ▲ or ▼ to select “MTS”, then press ◀ or ▶ to select “Stereo”. Treble Balance MTS Stereo Audio Language English HDMI Audio HDMI Audio 15...

37 TV operation 1 Press MENU in the TV mode. Then press ▲ or ▼ to select “Audio” , then press ▶ or ENTER. Picture Audio Channel Setup Main Menu : Select ENTER:Set 2 Press ▲ or ▼ to select “Audio Language”, then press ▶ or ENTER to display the Audio Language menu. Treble Balance MTS Stereo Audio Lang...

38 TV operation Using the aspect feature/Adjusting the back lighting When the Aspect feature is set to On and the TV receives a 480i signal, the picture size is automatically selected (as described in the following table). The Backlight feature adjusts the screen brightness for improved picture clar...

39 TV operation Resetting your settings Setting the Auto Shut Off Setting the Auto Shut Off/Resetting your settings If the Auto Shut Off feature is On, a station being viewed stops broadcasting and the TV is not operated, the TV will automatically shut itself off after 15 minutes. The Reset function...

40 Basic playback Press STOP to end playback. ■ Resuming facility • The unit records the stopped point, depending on the disc. “ ” appears on the screen. Press PLAY to resume playback (from the scene point). • If you press STOP again (“ ■ ” appears on the TV screen), the unit will clear the stopped ...

Basic playback 41 To pause playback (still mode) Press PAUSE during playback. To resume normal playback, press PLAY. • The sound is muted during still mode. To stop playback Press STOP. To remove the disc Press EJECT. Remove the disc after the disc comes out. Note: • If a non-compatible disc is load...

42 Basic playback Playing frame by frame Playing in fast reverse or fast forward directions Press REV or FF during playback. REV: Fast reverse playbackFF: Fast forward playback Each time you press REV or FF button, the playback speed changes. To resume normal playback Press PLAY. Press PAUSE during ...

43 Advanced playback Advanced playback Press / / / to view a different part of the frame. You may move the frame from the center position to UP, DOWN, LEFT or RIGHT direction. In the zoom mode, press ZOOM repeatedly to return to a 1:1 view ( Off). Zooming Press ZOOM during playback. The center part ...

Advanced playback 44 Press MARKER during playback. Select the blank Marker using or . Then press ENTER to mark the desired scene. • Repeat this procedure to mark the other 2 scenes. Marking desired scenes The unit stores the points that you want to watch again up to 3 points.You can resume playback ...

45 Advanced playback Press REPEAT A-B during playback. The start point is selected. Press REPEAT A-B again. The end point is selected. Playback starts at the point that you selected. Playback stops at the end point and returns to point A automatically, then starts again. [DVD]Press ENTER repeatedly ...

Advanced playback 46 3 2 VCD CD 1 1 2 Press / to return to the left column, then press / to select the “Program Playback” and press ENTER. The programs you selected will start to playback in order. • To resume normal playback, select Mode: “Off” in step 2. Program playback Press PLAY MODE in the sto...

47 Advanced playback Changing angles Title selection DVD menu Press ANGLE during playback. The current angle will appear. When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from. 1 Press ANGLE repeatedly until the desired angle is sel...

Advanced playback 48 Press SUBTITLE repeatedly during playback until the desired language is selected. Press AUDIO SELECT repeatedly until the desired language is selected. • The on screen display will disappear after a few seconds. Press AUDIO SELECT during playback. The current soundtrack language...

49 Advanced playback Disc status/To turn off the PBC DVDVCD Disc status With press of DISPLAY, the status of the disc will appear on the screen.To cancel the display, press DISPLAY again. DVD DVD 00:15:25 01:41:39 Title 1/3 Chapter 2/24 1/1 Eng Dolby Digital 1/2 Eng 1/1 DISC OPERATION ELAPSEDTIME TO...

Advanced playback 50 MP3/WMA/JPEG/DivX ® and Audio CD operation Audio CD/MP3/WMA/JPEG/DivX ® CD information Limitations on MP3/WMA/JPEG/DivX ® CD playback • MP3/WMA/JPEG/DivX ® CD is the disc that is standardized by ISO9660, its fi le name must include 3-digits extension letters, “.mp3”, “.wma”, “.j...

Advanced playback 51 MP3/WMA and Audio CD playback CD Load an Audio CD or a disc on which MP3 or WMA fi les have been recorded in the disc slot. 1 A fi le browser screen will appear on the screen. 2 About fi le menu Note:• In the case of a CD containing a mixture of MP3, WMA, JPEG and DivX ® fi les,...

Advanced playback 52 MP3/WMA/JPEG/DivX ® and Audio CD operation (Continued) The slide show enables you to view pictures (fi les) one after another automatically. Preparation:• Set “JPEG Interval” setting to “5 Seconds”, “10 Seconds” or “15 Seconds” 59 . Load a JPEG disc in the disc slot. 1 A fi le b...

Advanced playback 53 Load a disc on which DivX ® fi les have been recorded in the disc slot. 1 A fi le browser screen will appear on the TV screen. 2 Press / to select fi le. 3 Press ENTER or PLAY. The selected DivX ® movie will be played back on the TV screen. Press STOP to end playback. • The unit...

Advanced playback 55 J P E G P r e v i e w E d i t M o d e B r o w s e r Vi e w C l e a r P r o g r a m M P 3 - 1 M P 3 - 2 M P 3 - 3 W M A - 3 In the fi le browser, press / / / to select“Edit Mode”, then press ENTER. Press / / / to select fi le you want to add into the program list. Press / / / to ...

Function setup 56 • Repeat steps 3, 4 and 5 to change other option. • To select another section, go back to step 2 by pressing repeatedly. Customizing the function settings You can change the default settings of the DVD mode to customize performance to your preference.Press TV/DVD on the remote cont...

Function setup 57 Section Option Details Page MenuSubtitleAudio To select the language of “Menu”, “Subtitle” and “Audio” if more than one language are available on the disc. 58 TV Screen To select a picture size according to the aspect ratio of your TV. 58 Display To turn On or Off the operational s...

Function setup 58 Setting details Menu, Subtitle, Audio You can select the language of “Menu”, “Subtitle” and “Audio” if more than one languages are recorded onto the disc. English, Francais, Espanol:The selected language will be heard or seen. Other: Other language can be selected (see “Language co...

Function setup 59 Picture Mode There are two types of source content in pictures recorded in DVD video discs: fi lm content (pictures recorded from fi lms at 24 frames per second) and video content (video signals recorded at 30 frames per second). Make this selection according to the type of content...

Function setup 61 Enter the password with Number buttons (0–9). Then press ENTER. If the DVD disc has been designed to temporarily cancel the Rating level, the screen which follows the “Reading” screen will change, depending on which disc is played. If you select “YES” with the ENTER key, password i...

Others SYMPTOMS POSSIBLE SOLUTIONS PAGE POWER TV/DVD does not operate. • Make sure the connection of AC cord is secured.• Try another AC outlet.• Unplug unit, then plug it back in. 20 TV BROADCAST RECEPTION Poor sound or No sound. • Station or Cable TV may have problems, try another station.• Check ...

Others GHOSTS Ghosts are caused by the television signal following two paths. One is the direct path and the other is refl ected by tall buildings, hills or other large objects. Changing the direction or position of the antenna may improve the reception. IGNITION Black spots or horizontal streaks ma...

Others Language Name Code Language Name Code Language Name Code Language Name Code Abkhazian 1112 Fiji 1620 Lingala 2224 Singhalese 2919 Afar 1111 Finnish 1619 Lithuanian 2230 Slovak 2921 Afrikaans 1116 French 1628 Macedonian 2321 Slovenian 2922 Albanian 2927 Frisian 1635 Malagasy 2317 Somali 2925 A...

Others 66 Specifications Model 19LV505C 22LV505C General Power supply AC 120V 60Hz Power consumption Operation: 60 W, Stand by: 1 W Operation: 65 W, Stand by: 1 W Weight 11.2 lbs (5.1 kg) 13.5 lbs (6.1 kg) Dimensions Width: 18-9/16 inches (472 mm)Height: 15-13/16 inches (401 mm)Depth: 8-1/8 inches (...

Disclaimer and Limitation of Remedy TO THE EXTENT NOT PRECLUDED BY LAW, ALL OTHER EXPRESS AND IMPLIED WARRANTIES, CONDITIONS AND REPRESENTATIONS FOR THIS TELEVISION, INCLUDING THE IMPLIED WARRANTIES, CONDITIONS AND REPRESENTATIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY D...