Toro TEMPUS AG MV - Manuals

p. 5 C) DEVICES To access your devices, click on “Modules” option. Once in the main device ’ screen, when you select your gateway, you access all your available devices. You can now see all devices paired to your gateway. The part IV of this user manual will guide you in the programming and visualiz...

p. 6 D) CLUSTER On the main screen, click on “Clusters”. You will now be able to create your cluster by adding your devices. This subject will be detailed in part IV of this user manual.

p. 7 E) CANOPY Click on “CANOPY”. You now access the main screen of CANOPY with its dashboard. This function will be detailed in part VII of this user manual.

p. 8 II – PRESENTATION OF MYTORO TEMPUS DEVICES Regarding MyTOROTEMPUS devices available, you can find all our products listed below: TEMPUS AG-CT : 9V battery operated device working with Bluetooth and LoRa technology. It will allow you to manage up to 6 solenoid valves and to create different prog...

p. 9 III – MANAGE YOUR ACCOUNT A) CREATE YOUR ACCOUNT Your MyTOROTEMPUS account will allow you to: Automatically save your devices with their associated programs, in the app and the platform which guarantee you to always have access to your data in case of problem with your phone (loss, robbery, cra...

p. 11 B) CHANGE YOUR INFORMATION 1) THE PROFILE PICTURE Once connected to the platform, you can first see the profile picture. It is possible for you to change your picture with a document from your computer. To do so, click on the picture and you will be redirected to your file explorer so you can ...

p. 12 Your profile picture is now changed. Select “Profile” if you want to check your personal data. 2) PERSONAL INFORMATION AND PASSWORD MANAGEMENT On this page you can change your personal data such as: your email address, your First and Last name, your address and your password on the correspondi...

p. 13 Now the locker is open, enter a new password and make sure you write exactly the same in the “Password confirmation” area. Then, once your modifications are done, select “Save” option in order to register them. 3) SETTINGS DEFINITION Still on your profile page, you can choose the email address...

p. 14 4) TAGS CREATION On the “Profile” page, you can also access “Tags”. This functionality allows you to create notes in order to categorize your devices. Enter the name you want to attribute to your device , the color associated and select “Create”. You can create as much tags as you want, even f...

p. 15 Now select which of your tag(s) you want to apply and save your choice. Your tag(s) will appear in bold below the default name of your product. 5) PROFESSIONAL ACCESS REQUEST On this page you can check the given rights to your account and you can ask for professional access. This option is ded...

p. 16 6) CANOPY ACCESS REQUEST You can request the CANOPY function on this screen. Once your request has been sent, you will receive within 24hours an email in order to check if you are a professional. How to manage CANOPY feature will be detailed in Chapter VII of this user manual.

p. 17 IV - MANAGE YOUR IRRIGATION DEVICE Follow the procedure from II.A of the app user manual in order to associate in Bluetooth your gateway TEMPUS AG-WF / TEMPUS AG 4G and your LoRa devices (Described in part II of this user manual): TEMPUS AG-CT TEMPUS AG-MS TEMPUS AG-PR TEMPUS AG-MV When you ac...

p. 18 You will have the information about the device status and about its battery level. The logo of Information will provide your device SN number, which is its unique identification number. The organizational chart logo allows to directly access the gateway and see the other devices. The planet lo...

p. 19 The floppy disk logo offers the possibility to save or restore your device configuration and programming. When you select the tag logo, you will find the screen above which will suggest you to select a tag you created in part III.B.4 of this user manual, in order to identify your product. With...

p. 20 The cluster logo will appear only if your device has been associated to a cluster on a first hand. This logo of dissociation will appear only if your controller has been associated to a gateway. A) PROGRAMMING Regarding your stations programming, you can select for each station, 4 watering win...

p. 21 1) IRRIGATION BY TIME 1) When you have selected the irrigation by time for your station, you have 5 possibilities regarding the calendar: • Custom if you want to select specific days. • Even days (the 2 nd , the 4 th , the 6 th …). • Odd days (the 1 st , the 3 rd , the 5 th …). • Odd days minu...

p. 24 Once the synchronization has been done, the notification “Programs to send” will be replaced by “Module up to date” in green. 2) IRRIGATION BY VOLUME NB: As described in the irrigation by time programming paragraph, do not forget to set up all the standard settings (calendar, fertigation, flow...

p. 25 Regarding the irrigation by rainfall, you will need to register your station flowrate, the surface of your parcel and the amount in mm you want to irrigate. The system will automatically calculate the end time. 4) WARNING! Each time you want to modify your cyclic irrigation mode (by time, by v...

p. 27 C) START A MANUAL PROGRAM If you want to start a manual order, you have to select the device concerned, then select the command option (1) . Now, select the station (2) you want to start and enter its watering duration (3) and send the command to the device (4) . Please note, your device will ...

p. 28 On top right of the table in Automation’s page, you will find the possibility to rename your sensor with “Sensor management”. Select the sensor you want to rename and change it, then click on “Apply”. 2) FLOWMETER 1.1) ALERTS AND AUTOMATIC RULES When you access the “Automations” option, you ca...

p. 29 You have the possibility to enter your daily volume alert by defining low and high thresholds. (1) HIGH THRESHOLD : Maximum water consumption (in Gallon ) you don’t want to exceed on a 24-hour period of time. In case of exceeded objective, you will be immediately informed (per e-mail and smart...

p. 34 2) RAIN SENSOR 2.1) AUTOMATION Select the “Automations” option, you can define alerts and automatic rules of the Rain sensor. 1 11 2 11 3 11 4 11

p. 35 (1) Once your sensor has been set via the app, you can see the type of sensor. Note that you cannot modify it. The only way to remove your sensor is via the app, please refer to the app user manual. (2) Here, select if you want to be notified in case the sensor has detected a start of rain or ...

p. 36 6- To set it up precisely. During irrigation Screw the screw of the pressure switch until the instant value go to 0. 7- Then always during the irrigation, unscrew slowly a little bit more the screw in order to get again the 1. Note that you can also use a multimeter instead of checking the ins...

p. 37 (5) This step is the one where you can define the actions you want to be applied regarding the thresholds reached or not. 3.2) VISUALIZE You can visualize if the pressure has been reached or not on the graphic above. If value = 1, the pressure has been reached. If value = 0, the pressure has n...

p. 39 V – TEMPUS AG MS The TEMPUS-AG-MS is a Bluetooth® / LoRa connected battery operated sensor device that allows the data acquisition of temperature, moisture, flow rate, wind speed, rainfall. If linked to a LoRa gateway (TEMPUS-AG-4G or TEMPUS-AG-WF), it allows to visualize collected data in you...

p. 40 A) MOISTURE SENSOR The TEMPUS-AG- MS is compatible with various moisture sensors’ manufacturers (For example: VEGETRONIX VH400, TRUEBNER SMT50, WATERSCOUT SM100, DECAGON EC10 / EC5). (1) Once your sensor has been set via the app, you can see the type of sensor. Note you cannot modify it. The o...

p. 41 (4) In the part of “Linked Modules”, you can choose among your devices, which one you want to be controlled by the actions defined. (5) This step is the one where you can define the actions you want to be applied regarding the thresholds reached or not. B) ANEMOMETER The TEMPUS AG MS is compat...

p. 42 (4) In the part of “Linked Modules”, you can choose among your devices, which one you want to be controlled by the actions defined. (5) This step is the one where you can define the actions you want to be applied regarding the thresholds reached or not. C) AIR MOISTURE SENSOR The TEMPUS AG MS ...

p. 43 (4) In the part of “Linked Modules”, you can choose among your devices, which one you want to be controlled by the actions defined. (5) This step is the one where you can define the actions you want to be applied regarding the thresholds reached or not. D) THERMOMETER The TEMPUS-AG-MS is compa...

p. 44 VIII – CLUSTER FUNCTION A) CLUSTER FUNCTION PRESENTATION The cluster function allows you to group a number of devices in order to improve your programming management efficiency. If you define a master valve into the cluster, this one will synchronize automatically all devices programming. The ...

p. 45 B) FIRST STEPS WITH YOUR CLUSTER FUNCTION In order to create your cluster, click on the “Clusters” button. Once you have clicked on “Create a cluster”, you can now choose a cluster type.

p. 46 If you have a TEMPUS AG-MV, which is a device dedicated to manage your pump openings, you can select “Master valve”. The device will be recognized as master valve in your cluster. Then, you can give a name to your cluster. Add your TEMPUS AG-CT devices an d click on “Create the cluster”. C) PR...

p. 47 Once your cluster is created, the platform will synchronize all programs of your TEMPUS AG CT. Those information will be displayed in a summary chart. You have the possibility to program your stations one by one by selecting the concerned stations, as per the example above. Then, on the select...

p. 48 IX – CANOPY FUNCTION A) CANOPY FUNCTION EXPLANATION AND ACCESS REQUEST CANOPY is a function which has been designed for professional users. This function allows the user to create and draw their own site and see all the geolocated modules in a map. It also allows to manage their devices with g...

p. 49 First of all, when using CANOPY, you need to enter the name of your site, for example “TORO” and add it Then, you will get the screen above, and you can click on “understood” in order to start with the function. You can also draw your site thanks to the “draw a shape” logo on the top left of t...

p. 50 C) ADD DEVICES Once your site is drawn, you can add devices to the area. Make sure your devices have been geolocated. In order to register the geolocation, you need to access your device, select the planet logo below and enter the address where the device is located. Other option to geolocate ...

p. 51 D) DASHBOARD: VISUALISE YOUR SITE AND ALL DATA AT ONCE Thanks to CANOPY, you can get all information related to your site at once, on the dashboard. This will allow you to check if anything suspicious or abnormal happened in your area. For example: 1 - You can check your water consumption. 2 -...

p. 52 E) ASSOCIATE A SITE TO A USER As you can create as much sites as you want, you can attribute users to the ones you want. For example, if you are a municipality and manage different areas in your city, you can allow different gardeners to different area. This can be done thanks to “Site users”,...

p. 54 2) GROUPED COMMANDS: MANUAL COMMANDS If you need to start a manual command, you can go to “Command”, select manual station and choose the station you want to activate as well with its duration. G) VISUALIZE YOUR WATER CONSUMPTION OF THE SITE

p. 55 In order to visualize the water consumption of the complete site, you need to select all the sensors device. Then, select “Water consumption” button. X – PROFESSIONAL ACCOUNT 1) GENERAL INFORMATION The professional account functionality will allow you to manage your customer’s devices. In orde...

p. 56 3) DEVICES MANAGEMENT Once the Professional access has been granted to you, you can now send the email request to your customer in order to get his approval for controlling his devices. To do so, go to your profile and click on the new tab “Customers”. Then you will have the possibility to eit...