Toro 88611 - Manuals

Setup Loose Parts Use the chart below to verify that all parts have been shipped. Procedure Description Qty. Use 1 Screws (not included) 2 Mount the battery charger (optional). 2 Allen wrench 1 Unfold the handle. 3 Auxiliary handle assembly 1 Install the auxiliary handle. 4 Guard 1 Install the guard...

2 Unfolding the Handle Parts needed for this procedure: 1 Allen wrench Procedure 1. Unfold the handle (A of Figure 2 ). 2. Align the locking button on the lower shaft with the slotted hole on the upper shaft and slide the 2 shaftstogether (B and C of Figure 2 ). Note: The locking button clicks into ...

3 Installing the Auxiliary Handle Parts needed for this procedure: 1 Auxiliary handle assembly Procedure 1. Separate the auxiliary handle from the handle plate by removing the 4 socket head screws using theprovided Allen wrench (A of Figure 3 ). 2. Line up the auxiliary handle with auxiliary handle ...

4 Installing the Guard Parts needed for this procedure: 1 Guard Procedure 1. Using the provided Allen wrench, remove the 2 socket head screws, 2 washers, and 2 spacers from thetrimmer base (A of Figure 4 ). 2. Align the guard onto the trimmer base (B of Figure 4 ). 3. Secure the guard onto the base ...

Product Overview Specifications Appropriate Temperature Ranges Charge/store the battery packat 5°C (41°F) to 40°C (104°F)* Use the battery pack at -30°C (-22°F) to 49°C (120°F) Use the trimmer at 0°C (32°F) to 49°C (120°F) Store the trimmer at 0°C (32°F) to 49°C (120°F)* *Charging time will increase...

g268420 Figure 7 1. Variable-speed switch 3. Run trigger 2. Lockout trigger Shutting Off the Trimmer To shut off the trimmer, release both triggers. Whenever you are not using the trimmer or aretransporting the trimmer to or from the work area,remove the battery pack. Removing the Battery Packfrom t...

Maintenance After each use of the trimmer, complete the following: 1. Remove the battery from the trimmer. 2. Wipe the trimmer clean with a damp cloth. Donot hose the trimmer down or submerge it inwater. CAUTION The line cutoff blade on the deflector issharp and can cut you. Do not use your hands to...

Storage Important: Store the tool, battery pack, and charger only in temperatures that are within theappropriate range; refer to Specifications (page 11) . Important: If you are storing the tool for a year or longer, remove the battery pack from the tool andcharge the battery pack until 2 or 3 LED i...

Troubleshooting Perform only the steps described in these instructions. All further inspection, maintenance, and repair workmust be performed by an authorized service center or a similarly qualified specialist if you cannot solve theproblem yourself. Problem Possible Cause Corrective Action 1. The b...

California Proposition 65 Warning Information What is this warning? You may see a product for sale that has a warning label like the following: WARNING: Cancer and Reproductive Harm—www.p65Warnings.ca.gov. What is Prop 65? Prop 65 applies to any company operating in California, selling products in C...

Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any areaof potential danger. Replace any decal that is damaged or missing. decal145-3141 145-3141 decal139-5210 139-5210 1. Warning—read the Operator’s Manual ; stay away from movin...

Setup 1 Connecting the Attachment to the Power Head No Parts Required Procedure 1. Install the square shaft of the attachment into the square shaft of the power head (A of Figure 3 ). 2. Align the locking button on the lower shaft with the slotted hole on the upper shaft and slide the 2 shaftstogeth...

2 Installing the Guard Parts needed for this procedure: 1 Guard 4 Washer 4 Bolt Procedure 1. Align the trimmer guard beneath the guard mount as shown in Figure 4 . g333216 Figure 4 1. Guard mount 3. Washer 2. Trimmer guard 4. Bolt 2. Secure the guard to the trimmer using the 4 washers and 4 bolts as...

Product Overview g372306 Figure 5 1. Guard 3. Bump button 2. String Specifications Model 88716, attaches to 51810T Charger Type 88610, 88602, or 88605 Battery Type 88620, 88625, 88640, 88650,88660, or 88675 Appropriate Temperature Ranges Charge/store the battery packat 5°C (41°F) to 40°C (104°F)* Us...

Shutting Off the Trimmer To shut off the trimmer, release the trigger. Whenever you are not using the trimmer or aretransporting the trimmer to or from the work area,remove the battery pack. Removing the Battery Packfrom the Power Head Press the battery latch on the machine to release thebattery pac...

Maintenance After each use of the trimmer, complete the following: 1. Remove the battery from the power head. 2. Wipe the trimmer clean with a damp cloth. Donot hose the trimmer down or submerge it inwater. CAUTION The line cutoff blade on the deflector issharp and can cut you. Do not use your hands...

Storage Important: Store the tool, battery pack, and charger only in temperatures that are within theappropriate range; refer to Specifications (page 9) . Important: If you are storing the battery pack for the off-season, remove the battery pack from thetool and charge the battery pack until 2 or 3 ...

Troubleshooting Perform only the steps described in these instructions. All further inspection, maintenance, and repair workmust be performed by an authorized service center or a similarly qualified specialist if you cannot solve theproblem yourself. Problem Possible Cause Corrective Action 1. The b...

California Proposition 65 Warning Information What is this warning? You may see a product for sale that has a warning label like the following: WARNING: Cancer and Reproductive Harm—www.p65Warnings.ca.gov. What is Prop 65? Prop 65 applies to any company operating in California, selling products in C...