Toro 2011 - Manuals - manualsarea.com

Page 4 - Figure 4 - Model 2021 (two wireline ports and one radio port)

7 8 19 17 9 10 12 11 13 20 21 22 24 23 25 27 26 28 1 2 6 6 6 18 14 16 3 4 5 15 31 30 32 33 29 1 - Central Computer 2 - Field Interface Unit 3 - COM Port 1 4 - COM Port 2 5 - COM Port 3 6 - DB-9/DB-9 Serial Cable 7 - Power Adapter 8 - Auxiliary Port (optional for sensors) 9 - Channel 3 (in) 10 - Chan...

Page 5 - in the appropriate configuration diagram Figure 1–5.; Figure 6

Installing the Field Interface Unit, Wall Plate Assembly and Surge Protection Unit 1. Position the Field Interface Unit within 6' (1.8 m) of the PC. Note: Maximum distance is 50' (15.2 m). 2. Using the serial cable(s) supplied, connect the PC to the FIU as illustrated in the appropriate configuratio...

Page 6 - Earth Ground Installation; Figure 7; Yellow

7. A 25' (7.6 m) length interface cable is supplied for the connection of the modular wall plate to the SPU. Select an installa- tion site for the SPU on an outside wall, within the cable reach, and 3' to 5' (0.9 m to 1.5 m) above ground level for straightand easy access to an earth ground. Attach t...

Page 7 - Satellite Communication Cable Installation; Procedure

Procedure 1. Drive a 5/8" (16 mm) by 8' (2.5 cm) copper-clad steel ground rod into well-moistened soil not more than 8' (2.5 cm) from the SPU. The top of the ground rodshould be 12" (30.5 cm) below grade level. 2. Install 3/4" (19 mm) conduit from the bottom of the SPU enclosure to appro...

Page 9 - Satellite System Setup; If the FIU is not active, restart SitePro with FIU COM Port Defined.; Note: The required Motorola

Processor Ready: Indicator light will illuminate when the microprocessor in the FIU has received configuration instructionsfrom PC and is ready to communicate with satellites or DIUs. Field Transmit: Indicator light will illuminate or flash during transmission of data to field satellites or DIU(s). ...

Page 10 - COM ports depending on COM port availability.

Note: The Motorola radio service software screens shown inFigure 12, 13, and 14 are for example only. Later servicesoftware versions may not be formatted as shown, however,the items within boxes must be set as indicated to enablesystem operation. Radio Components Connection 1. Using the cables provi...

Page 11 - Verify that all cables are properly connected.

Radio-Link System Setup 1. Reconnect power to the FIU and switch on all components. The central computer should be booted up and the SitePro pro- gram operational. See Figure 3 and 4 respectively for hardware configuration of model FIU-2011 and FIU-2021. 2. From the SitePro program menu bar, select:...

Page 12 - SitePro Central Decoder System Connection; Decoder Interface Unit Communication Cable Installation; each additional DIU conduit box.; Central Decoder System Setup

SitePro Central Decoder System Connection The SitePro Central Decoder System (CDS) program works in conjunction with the SitePro Field Interface Unit Model 2010and the Decoder Interface Unit (DIU). Connect the FIU, central computer, SPU and the DIU(s) as shown in Figure 16. All hardware is provided ...

Page 15 - Refer to Figure 18 for the following items:; FIU Sensor Kit; Note: Service items subject to change without notice.; Universal Modem

15 Item No. Part No. Description Quantity Per Assy. Refer to Figure 18 for the following items: 1 - - - - - - - Housing, SNCX, FIU 1 2 - - - - - - - Bracket, FIU (See Service Item 102-0867) 1 3 - - - - - - - Front Plate, LED Display (See Service Item 102-0872) 1 4 360-0750 Holder, Fuse 1 5 360-0749 ...

Troubleshooting If a malfunction occurs, follow the suggested steps to identify and fix the problem. If the problem cannot be resolved theremay be a problem with the FIU, the satellite or the DIU. If you have current NSN support, please call Toro NSN at 1-800-527-4248. Otherwise, please call our Tor...