1 IMPORTANT SAFETY INSTRUCTIONS 1. If connect with water supply, CAUTION: must connect the potable water supply;2. The machine is intended to be used in household and similar applications such as CAUTION: ICE CAN’T BE STORED IN THE ICE BIN DURING NIGHT TIME,IT’S NOT A When using electrical appliance...
Page 3 - WARNING
2 13. Do not clean your ice maker with flammable detergents.The fumes can create a fire hazard or explosion. 14. Do not tip the machine over.15. If the ice maker is brought indoors from outdoors during the wintertime,give it a few hours to warm up to room temperature before plugging to power source....
Page 4 - UNPACKING YOUR ICE MAKER; Accessories list
3 UNPACKING YOUR ICE MAKER Warning:Please keep foam and other packaging materials from children and disabledpeople, as this may cause danger to them.NOTE: Please remove all packages when using,or else the machine may not work properly.a) Remove the packaging and check whether the machine is intact.b...
Page 7 - )Electrical connection
6 2) Drainage Warning: Because the ice in the inner tank will melt, drain pipe must be connected beforeusing, and insert the drain pipe into a container or into the sewer.Note: Connect one end of the drain pipe to the machine, and the other end to a container or sewer. The other port of the drain pi...
7 MACHINE OPERATIONS Operation Panel Quick introduction 1. Connect and turn on the water faucet before power the machine.2. Turn on the machine,it start to replenish water with lighted”adding water” and “lack ofwater”,after finishing,it will enter to standby mode with “00”displayed in the screen. At...
Page 9 - CLEANING & MAINTENANC
8 increase the making time in minute. B:When the machine is at the middle of ice making or standby mode,hold the button for 2s 7. to set the auto-turning-on or auto-turning-on time (The time range is from 0-23 hour ,in hours). A: When the machine is at the middle of ice making, press the “Light/-” b...
Page 11 - Common malfunction analysis
10 Common malfunction analysis 1) NO ICE Issues Possible causes solutions The machine doesn’t work The plug didn’t plug into socket Plug into socket The fuse is melted or broken Replace the fuse The ice is full Clean out the ice cubes No power or lower voltage Contact power supply bureau No water or...