Thermador SGN30 - Manuals

SAFETY ELECTRICAL REQUIREMENTS AND GROUNDING INSTRUCTIONS PLEASE READ CAREFULLY Section One: General Safety Instructions . Page 3 IN CASE OF AN ELECTRICAL FAILURE If for any reason a gas control knob is turned ON and there is no electricpower to operate the electronic igniter of the cooktop, turn OF...

Section One: General Safety Instructions IMPORTANT SAFETY INSTRUCTIONS WARNING - TO REDUCE THER I S K O F F I R E , E L E C T R I CSHOCK, OR INJURY TO PER-SONS, OBSERVE THE FOLLOW-ING: A. Use this unit only in the man- ner intended by the manufac-turer. If you have any ques-tions, contact the manufa...

1. Check that you have these items. GGS30/36, GGSCV30/36GGN30/36, GGNCV30/36 / ▲ 4 Burner Grates ▲ 4 Burner Caps ▲ 2 Ventilator Filters* ▲ Care and Use Manual(warranty found on Page 29). GGS365, GGSCV365GGN365, GGNCV365 ▲ 5 Burner Grates ▲ 5 Burner Caps ▲ 2 Ventilator Filters* ▲ Care and Use Manual ...

Section Three: Description 3 2 4 5 7 10 8 9 ➚ 11 1 3 2 4 5 7 8 6 10 9 ➚ 11 1. Cook'n'Vent™ 2. Models GGS - ExtraLow™ 300 to 9,100BTU/HR Burner & Control KnobModels GGN - 950 to 6,500 BTU/HRBurner & Control Knob 3. Models GGS - ExtraLow™ 365 to 11,000BTU/HR Burner & Control KnobGGN Models...

CONTROL KNOB — ALL STANDARD BURNERS OFF HI LO GlassM o d e l s ExtraLow™ CONTROL KNOB SETTINGS OFF LO HI XLO THERMADOR ® EXTRALOW™ BURNERS(ModelsGGS/SGS) The left front 9,100 BTU/HR burnerand left rear 11,000 BTU/HR burnerare designed to provide flame set-tings which enable you to simmer,poach, melt...

Section Four: Using the Cooktop COOKTOP OPERATION SIGNAL LIGHT The Signal Light (not on all models),or "ON" Light is located in the area ofthe Control Knobs. For location see"Section Three: Description", locatedon pages 7 to 9, to identify your model.This light turns on when any Cont...

The cooktop uses electronic ignit-ers to light the burners. Eachburner has its own igniter thatsparks when any burner is turnedon. When the igniters are clicking(sparking), do not touch the burn-ers. If a burner fails to ignite, see“Before Calling For Service,” Page28. AUTOMATIC RE-IGNITION If any b...

Section Four: Using the Cooktop FLAT CONVEX (rounded) CONCAVE (hollow) Balanced Pan Unbalanced Pan Use balanced pans that sit level on the burner grate without tilting fromthe weight of the handle. Use Lids that fit Properly Use lids that fit the cookware prop-erly to help shorten cooking time and t...

Section Four: Using the Cooktop Use flat, heavy bottom pans thatstay flat when heated for the bestresults. Avoid cookware that is warped, dented, ridged or thin. Awarped or ridged pan receives themost heat at the points that contactthe flame. This can result in burningor scorching of the food being ...

CAUTION Use the right size flame for the cooking job SUGGESTED FLAME SETTINGS Section Four: Using the Cooktop FLAME SETTING CHART GUIDELINES LO Medium XLO 3 4 2 1 HI All the controls have an infinitenumber of heat settings, with nofixed positions between HI, LO or XLO. The word ( Medium ) and number...

Page 17 Before using this chart, read Page 16. Section Four: Using the Cooktop USING THE COOKTOP EXTRALOW™ HEATSETTINGS CONTINUECOOKING START COOKING FOOD 2 to 1 — to finish cooking HI — Cover, bring liq- uids to a boil Poaching: Chicken, whole or pieces, Fish 4 to 3 — to hold, covered 3 to 2 — to h...

Section Four: Using the Griddle’n Grill GRIDDLE‘N GRILL OPERATION SUGGESTED HEAT SETTINGS CHART GRIDDLE GRIDDLE/GRILL CONTROLKNOB and SIGNAL LIGHT The number designations, on the il-lustration, are for reference only andare guides to the heat settings in thischart. 5 HI • • • • • • 3 4 2 7 6 8 LO Pa...

Section Four: Using the Griddle’n Grill GRIDDLE ‘N GRILL OPERATION Page 20 The doneness of meat, whether rare,medium, or well done, is affected toa large degree by the thickness of thecut. Expert chefs say it is impossibleto have a rare doneness with a thincut of meat. The cooking time is affected b...

Section Four: Using the Cooktop COOK'N'VENT ® OPERATION Page 21 VENTILATORM o d e l s G G S C V 3 0 / 3 6 / 3 6 5and SGSCV36G Blower Speed Control CONTROLS FOR GGSCV36/365 CONTROLS FOR GGSCV30 VENTILATOR CONTROLS Up /Down Control Up /Down Control CONTROLS FOR SGSCV36G Up /Down Control Blower Speed C...

Section Five: Care and Maintenance Page 22 GENERAL CARE BURNER PLATES Burner Base Indentation for Grate (E) BURNER PLATE (C) UNDERSIDE OF BURNER CAP Notch (B) Porcelain Enamel Burner Cap Burner Grates IGNITER (D) Extension (E) The grates are porcelain enameledcast iron or steel. They should bewashed...

Section Five: Care and Maintenance GLASS COOKTOP PORCELAIN ENAMEL CONTROL KNOBS To Remove: Turn the control knob to the OFF position and pull up. PORCELAIN ENAMEL COOKTOP CLEANING CHART Glass Porcelain Enamel or Stainless Steel OFF OFF CONTROL KNOBS Page 23 GENERAL CARE BRAND NAMES The use of brand ...

Page 24 Section Five: Care and Maintenance Griddle • Normal Hot sudsy water, sponge or nylon pad. • Wash thoroughly with hot soapy water, rinse and dry.Always wash and rinse the griddle thoroughly after each use. Some discol-oration may occur with use, but will not affect performance. When notthorou...

Page 25 Section Five: Care and Maintenance MATERIAL/PART ELEMENT Griddle Element DO NOT RINSE OR IMMERSE ANY ELEMENT IN WATER. The element will cleans itself when turned onto the HI setting. The drip pan must always be in placewhen cooking on the Griddle'n Grill. Do not leave the cooktop unattended ...

See “SAFETY PRACTICES,”on Page 4. Side Supports Hook over Side Supports * Not on all Models. Section Five: Care & Maintenance COOK'N'VENT ® VENTILATOR CARE* Page 26 To Clean Gap AreaBetween Ventilator &Cooktop 1. With ventilator in up position,remove front panel, ventilatorcap and filters. 2...

Remote Blower SIDE VIEWS BelowCounter DO NOT REMOVE C o u n t e r t o p L e v e l KEY: Section Five: Care & Maintenance GENERAL CARE AND MAINTENANCE - COOK'N'VENT A Access Panel B Access Panel C Cabinet Blower or DuctAttachment Box for theRemote Blower D Four Thumb Screws TO REACH CLEAN OUT AREA...

Before calling for service, check the following to avoid unnecessary service charges. Section Six: Service ☛ ☛ NOTE: Polarity —In older houses, wiring polarity was notalways observed. Although polar-ized receptacles (3 Prong) mayhave been installed, they couldhave been wired incorrectly. Ifthey were...

Section Six: Service GGS30/36/365 - GGSCV30/36/365 - SGS30 -SGS36G - SGSCV36G -GGN30/36/365 - GGNCV30/36/365 - SGN30 - SGN36G - SGNCV36G FULL ONE YEAR WARRANTY Covers one year from date of installation, or date of occupancy on a new, or previously unoccupied dwelling.Save your dated receipt or other...