Telex FMR-500 - Manuals - manualsarea.com

Page 2 - Trans mit ter “Quick Set-up” is com plete.; if nec es sary; Sec tion 2 - Sys tem De scrip tion; Sys tem Fea tures In clude:

Sec tion 1 - Quick Set-Up Quick Set-up: Re ceiver 1. Do not con nect the re ceiver to any other equip -ment yet! 2. Con nect the two an ten nas to the re ceiver. 3. Plug the power sup ply into the back of the re -ceiver and into an out let. 4. Press the POWER switch. Dis play will light up. 5. P r e...

Page 3 - Sec tion 3 - De tailed Com po nents De scrip tion; Re ceiver Setup and Op er a tion; FMR-500 Re ceiver Con trols, Con nec tors, and In di ca tors

Sec tion 3 - De tailed Com po nents De scrip tion Re ceiver Setup and Op er a tion 1. Place the re ceiver and an ten nas where there is aclear line of sight to the area where the trans mit -ter will be used. Ro tate the an ten nas to sep a ratethem by 90 de grees. 2. Con nect the power sup ply cord ...

Page 4 - Squelch Ad just ment; Dis play; Re ceiver Push-But ton Ref er ence Sheet

NOTE: Groups 9 and above are set up to workwith the other US fre quency band (A and B). Ifyou are us ing a mix of Band A and Band B, scroll down to these groups and use the clear est group. 6. Change Lock-Out : By press ing and hold ing the UP and DOWN ar row keys to gether for 3 sec -onds, the SET ...

Page 5 - Fig ure 3

Rack Mount In stal la tion The FMR-500 is sup plied with rack mounts for sin -gle and dou ble mount ing in a stan dard EIA 19"/ 483mm equip ment rack (see Fig ure 3). For rack mount ing a sin gle unit, a long (#3) and short (#1)"ear" are used. For dual side-by-side mount ing, usethe shor...

Page 6 - Handheld Trans mit ter HT-500

Handheld Trans mit ter HT-500 Fig ure 5 Handheld Trans mit ter HT-500 Con trols,Con nec tors, and In di ca tors Handheld Trans mit ter Setupand Op er a tion 1. In sert Bat tery. Re move the bat tery com part - ment cover by un screw ing it com pletely. In sert a 9V bat tery, ter mi nal end first int...

Page 8 - AP PROVAL IN FOR MA TION

Bodypack Trans mit ter Setupand Op er a tion 1 . In sert Bat tery. Pinch the bat tery door tabs in - ward and pull the door open. In sert a 9V bat teryas in di cated by the +/- in the holder. 2. With bat tery com part ment still open, turn the unit on with Power switch on the top panel. The bat tery...

Page 9 - Sec tion 4 - Re ceiver Dis play Screens and Func tions; Main Op er at ing Screen; Squelch Ad just ment Screen; Squelch Adjustment Screen; Trans mit ter Dis play and Con trols; · · · · · · · · In di cates Scan is in prog ress

Sec tion 4 - Re ceiver Dis play Screens and Func tions Main Op er at ing Screen Fig ure 10 Main Op er at ing Screen Squelch Ad just ment Screen Fig ure 11 Squelch Adjustment Screen Trans mit ter Dis play and Con trols Fig ure 12 Trans mit ter Dis play and Con trols -8- -20 -10 -5 0 +3 1 3 10 30 100 ...

Page 10 - Cau

Trans mit ter On/Off Lock-Out There are two On/Off lock out modes avail able, One Time and Everytime. One Time: Cy cle the power switch 3 times in un der 3 sec onds and On-Loc will be dis played for a sec -ond and then re turn to nor mal op er a tion. The power switch alone will no lon ger turn the ...

Page 11 - Sec tion 5 - Trou ble Shoot ing Guide; Prob lem

Sec tion 5 - Trou ble Shoot ing Guide -10- Prob lem No au dio and no dis play onthe re ceiver No au dio and no RF sig nalin di ca tor on the re ceiver dis -play No Au dio with good RF sig -nal in di ca tor but no (or low)Au dio in di ca tor on the re -ceiver dis play No (or low) Au dio with good RF ...

Page 13 - Sec tion 6 - Tech ni cal Spec i fi ca tions; Spec i fi ca tions; Pro gram ma ble in 25 kHz steps; True Di ver sity; Au dio Pa ram e ters; 0mV to 2V RMS 100K OHM Load, Line Po si tion

Sec tion 6 - Tech ni cal Spec i fi ca tions -12- FMR-500 Re ceiver Spec i fi ca tions Over all Re ceiver Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Syn the sized PLL Fre quency Range (RF) . . . . . . . . . . . . . . . . . . . . . A Ba...

Page 14 - Sec tion 7 - Ac ces so ries and Parts

Sec tion 7 - Ac ces so ries and Parts -13- MODEL No. Or der No. Omnidirectional La pel Mi cro phone WLM-50 64277000 Uni di rec tional La pel Mi cro phone UML21 ULM21 Pre mium Omnidirectional La pel Mi cro phone ELM-22 70925006 Pre mium La pel/In stru mentUni di rec tional Mi cro phone ELM-33 7092600...

Page 15 - To ob tain war ranty ser vice, the cus tomer must de liver the prod uct,; In ci den tal and Con se quen tial Dam ages Ex cluded:; Prod uct re pair or re place ment and re turn to the

Sec tion 8 - Fac tory Ser vice/War ranty (Lim ited) FAC TORY SER VICE (North Amer ica) If fac tory ser vice is re quired, ship the unit pre paid in its orig i nal car ton to: TELEX COM MU NI CA TIONS, INC.Au dio Ser vice8601 East Cornhusker High way,Lin coln, Ne braska 68507-9702 U.S.A. Phone: (402)...