Tektronix CT-1 - Manuals

Tektronix CT-1 – Manual in PDF format online.

Manuals:

Manual

Manual Tektronix CT-1

Summary

Page 3 - WARRANTY

WARRANTY Tektronix warrants that the products that it manufactures and sells will be free from defects in materials andworkmanship for a period of one (1) year from the date of shipment. If a product proves defective during thiswarranty period, Tektronix, at its option, either will repair the defect...

Page 5 - General Safety Summary; in injury or loss of life.; To Avoid Fire or

CT-1/CT-2 Current Transformer i General Safety Summary Review the following safety precautions to avoid injury and prevent damage tothis product or any products connected to it. To avoid potential hazards, use thisproduct only as specified. Observe All Terminal Ratings. To avoid fire or shock hazard...

Page 6 - ii

General Safety Summary ii CT-1/CT-2 Current Transformer

Page 7 - Introduction; This manual provides information on four subjects:

CT-1/CT-2 Current Transformer 1 Introduction The CT-1 and CT-2 are high-frequency, bidirectional current probes. The CT-1 isa 1 GHz current probe and the CT-2 is a 200 MHz current probe. Each currentprobe comes with a P6041 probe cable to allow you to connect directly to anoscilloscope to make measu...

Page 8 - Description

2 CT-1/CT-2 Current Transformer Description The CT-1 (1 GHz) and CT-2 (200 MHz) are current probes designed for eitherpermanent or temporary installation in the device-under-test (DUT). Theseprobes are particularly useful for measuring high-frequency currents in solid statecircuitry with minimum cir...

Page 10 - Specifications; Table 1: Electrical characteristics

4 CT-1/CT-2 Current Transformer Specifications Table 1 lists the electrical characteristics of the CT-1 and CT-2 Transformerswhen they are connected to the P6041 Probe cable. The environmental andphysical characteristics follow Tables 1 and 2. Table 1: Electrical characteristics Specification CT-1 w...

Page 12 - Operation; . If the oscilloscope input is not 50

6 CT-1/CT-2 Current Transformer Operation This section describes how to install the CT-1 or CT-2, discusses low-frequencyprobing, and provides information on safety and product care. Installing the CT-1 or CT-2 The CT-1 or CT-2 transformers can be attached to the chassis or circuit board tomeasure c...

Page 13 - Low Frequency Response; Tp f; Figure 6: CT-1 decay characteristics referenced to front corner

Operation CT-1/CT-2 Current Transformer 7 Low Frequency Response The low-frequency response of the current transformer is proportional to theinductance of the transformer windings. A DC component in the current beingmeasured tends to reduce this inductance. Figures 2 and 3 show this effect in thefre...

Page 14 - Figure 7: CT-2 decay characteristics referenced to transition; Probe Handling; Dropping the CT-1 or CT-2 transformer may break the probe. Do not

Operation 8 CT-1/CT-2 Current Transformer Input current Outputvoltage 0.4 A DC 0 A DC 5 m s/div 10 mA/div 0.4 A DC 0 A DC Figure 7: CT-2 decay characteristics referenced to transition Additional consideration needs to be given to the amp second rating of thetransformer. The product of the pulse curr...

Page 15 - Replaceable Parts List; Parts Ordering Information; Part number; Using the Replaceable Parts List

CT-1/CT-2 Current Transformer 9 Replaceable Parts List This section contains a list of the replaceable parts for the CT-1 and CT-2. Usethis list to identify and order replacement parts. Parts Ordering Information Replacement parts are available through your local Tektronix field office orrepresentat...

Page 16 - Parts list column descriptions; Abbreviations

Replaceable Parts List 10 CT-1/CT-2 Current Transformer Parts list column descriptions Column Column name Description 1 Figure & index number Items in this section are referenced by figure and index numbers to the exploded viewillustrations that follow. 2 Tektronix part number Use this part numb...

Page 17 - Replaceable parts list; Manufacturers cross index

Replaceable Parts List CT-1/CT-2 Current Transformer 11 1 2 3 4 Recommended accessories Figure 8: CT-1 and CT-2 accessories Replaceable parts list Fig. &indexnumber Tektronixpart number Serial no.effective Serial no.discont’d Qty Name & description Mfr. code Mfr. part number 8-1 CURRENT TRAN...