Tascam CD-RW5000 - Manuals

1 - Introduction TASCAM CD-RW5000 7 1.2 Finalizing Although audio data may be written on a CD-R or CD-RW disc, an audio CD player will not be able to read the data (i.e. play back the audio) until a final table of contents (TOC) has been written at the start of the disc. The process of writing this ...

2 - Parts of the CD-RW5000 TASCAM CD-RW5000 11 [12] ERASE key This key only has any effect when a CD-RW disc is inserted in the CD-RW5000. If a standard CD or a CD-R disc is inserted, it will have no effect. Pressing this key once will prepare to erase the last recorded track. Pressing this key twic...

2 - Parts of the CD-RW5000 12 TASCAM CD-RW5000 [24] COAXIAL digital INPUT This RCA connector accepts digital audio data in SPDIF format. [25] COAXIAL digital OUTPUT This RCA connector outputs digital audio data in SPDIF format. [26] OPTICAL digital INPUT This optical connector allows input of digita...

2 - Parts of the CD-RW5000 TASCAM CD-RW5000 13 The remote control unit keys are listed here, together with the number (in square brackets) of the corre-sponding key on the main unit, when these keys are identical in function to those on the main unit. When these keys have a different function, or ar...

14 TASCAM CD-RW5000 3 - Playback operations This section gives details of the basic operations you can perform when using the CD-RW5000 to play back CDs. Playing back CDs on the CD-RW5000 is similar to playing back CDs on any other CD player. The CD-RW5000 can play back ordinary pre-recorded commerc...

3 - Playback operations TASCAM CD-RW5000 15 3.3.2 Fast searching The remote control unit features keys to allow pre-cise searching and positioning within the CD. 1 Press and hold the backward or forward key to search backward or forward at twice nor-mal speed. 2 Press the FAST key, followed in by th...

16 TASCAM CD-RW5000 4 - Recording operations Before starting to record CDs, make sure that all appropriate connections (analog and digital) are made both into and out of the CD-RW5000. Turn off all equipment while making connections to avoid transient noises which may damage your monitoring speakers...

4 - Recording operations TASCAM CD-RW5000 17 2 Use the DIGITAL INPUT key [9] to select between the three possible digital audio sources: AES/EBU , COAXIAL and OPTICAL . It is assumed that the digital program material has been edited so that there is no clipping. If a digital signal goes over the max...

4 - Recording operations 18 TASCAM CD-RW5000 • Automatically, when the signal level drops below –36 dB and stays below that level for 20 seconds or more. • Manually, using the CD-RW-5000’s STOP key. SYNC ALL • Automatically, when the signal level drops below –36 dB and stays below that level for 20 ...

4 - Recording operations TASCAM CD-RW5000 19 NOTE You cannot use the manual track division facility if the automatic synchronization is selected. Make sure that this facility is turned off before you start recording with manual track divisions. It is possible to switch between manual and automatic t...

4 - Recording operations 20 TASCAM CD-RW5000 disc, the disc can be completely erased for further recording, however). 1 With the disc to be finalized inserted into the CD-RW5000, press the FINALIZE key [11] or [35] . 2 Press the RECORD key [17] or [45] within two seconds of pressing the FINALIZE key...

5 - Messages, troubleshooting, etc. 22 TASCAM CD-RW5000 5.1.1 Self-diagnostic program The CD-RW5000 allows you to check the electronic components of the unit if you are experiencing prob-lems in the operations of the unit, and the trouble-shooting measures described above have not cured the problem....

TASCAM CD-RW5000 23 6 - Specifications 6.1 Audio specifications 6.2 I/O specifications Recording time 74 minutes (with 74-minute disc) CD type Playback of CD-DA (Red Book), CD-R and CD-RWRecording on CD-R and CD-RW a a. Brands of disc that are recommended for used with the CD-RW5000 are the Taiyo Yu...

6 - Specifications 24 TASCAM CD-RW5000 6.3 Physical specifications Changes to specifications and features may be made without notice or obligation. Voltage requirements: USA/Canada 120 VAC @ 60 HzEurope/UK 230 VAC @ 50 HzAustralia 240 VAC @ 50 Hz Power consumption 24W Weight 5.6 kg (12.35 lbs) Dimen...

TEAC CORPORATION Phone: (0422) 52-5082 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan TEAC AMERICA, INC. Phone: (213) 726-0303 7733 Telegraph Road, Montebello, California 90640 TEAC CANADA LTD. Phone: 905-890-8008 Facsimile: 905-890-9888 5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canad...