Tascam CD-01 U - Manuals

1 - Introduction ΠΠEnvironmental considerations T h a n k y o u f o r y o u r p u r c h a s e o f t h e T A S C A M C D - 01U/CD-01U Pro CD player. Before connecting and using the unit, please take time to read this manual thoroughly to ensure you under- s t a n d h o w t o p r o p e r l y s e t u...

1 - Introduction ΠΠEnvironmental considerations The CD-01U/CD-01U Pro have been designed for the playback of CD-DA format discs and MP3 files record- ed in ISO9660 format. In addition to ordinary 5-inch and 3-inch CDs, it can also play properly recorded CD-R and CD-RW discs. When removing a CD fro...

2 - Remote control unit Some notes and precautions ≠ When the remote control will not be used for anextended period of time, please remove the batteriesto prevent the possibility of battery acid leakagewhich could damage the unit. Should leakage occur, remove and discard the bat-teries, and wipe the...

3 - Connections Before connecting the CD-01U/CD-01U Pro to other units, please read their operation manuals thoroughly to ensure proper connection. Turn the power on only after all connections have been made. Audio equipment Connecting analog audio equipment Connect analog stereo amplifiers, mixers ...

4 - Features and their functions Front panel 1 POWER switch 2 Disc slot Insert CD into the slot, label side upwards. 3 Remote signal sensor 4 EJECT key Ejects a disc. This key cannot be used when EjectBlock is on and disc is being played back. 5 Display The display is used to show the current status...

4 - Features and their functions Display 1 TRACK indicator 2 Track number display Shows the track number. In the menu mode, showsthe menu number. 3 MP3 indicator Lights when a MP3 CD-ROM disc is inserted. 4 INDEX/DIR indicator S h o w s t h e i n d e x n u m b e r ( C D - D A ) o r d i r e c t o r y...

1 ANALOG OUTPUT terminals The analog line output terminals are for RCA pinjacks. The maximum output level is +6 dBV. 2 DIGITAL (OPTICAL) OUTPUT terminal Provides the digital audio signal in S/PDIF format.This connector outputs the 44.1KHz digital signalsconstantly even if pitch control is activated....

14 TASCAM CD-01U/CD-01U Pro 5 - Menu operation The various settings and editing operations possible with the CD-01U/CD-01U Pro are performed through menu options shown on the display. Among the many menu setting options, some may be made directly using the keys on the remote control. No. Menu Functi...

CDs containing MP3 files can be played by the CD- 01U/CD-01U Pro with the following limitations on the number of files and directories. Maximum number of directories: 254 Maximum number of MP3 files: 255 File format: MPEG 1 audio layer 3 Bit rate: 32kbps to 320kbps Sampling frequency: 44.1KHz, Stere...

Plug the headphone cord into the PHONES jack. Adjust the volume with the volume control. When using headphones, take care not to turn the vol- ume too high. Listening at high volumes for extended periods of time may result in permanent hearing dam- age. 16 TASCAM CD-01U/CD-01UPro 6 - Playback Playba...

6 - Playback Selecting by track number Using the number keys on the remote control, the num- ber of the desired track can be entered directly. Even numbers with two (Audio CD) or three (MP3) digits can be entered easily. For example: Track 9 (Audio CD): press 0 then press 9. Track 9 (MP3): press 0, ...

7 - Advanced operations Auto Cue When the Auto Cue function is turned on and a track is selected, the point where sound begins (not where the track begins) on that track is located to and the unit enters pause mode. When the ¥ key is pressed, playback begins at exactly that point. Auto Cue is not su...

7 - Advanced operations Press the REPEAT key on the remote control to turn on the repeat mode. In this mode, all the tracks on the disc are played continuously. During playback, if the repeat mode is turned on, play- back continues as before, and when the last track fin- ishes, playback resumes from...

B y u s i n g a n e x t e r n a l t i m e r , y o u c a n s e t t h e C D - 01U/CD-01U Pro to play the loaded disc automatically when the unit is turned on by the timer. 1 First, plug the power cord of the CD-01U/CD-01U Pro into the power outlet of the timer. 2 Load a CD into the unit. 3 Set the TIM...

7 - Advanced operations 1 Enter the program mode. 2 Use the SEARCH keys to select the track for editing. Also using the PITCH knob on the front panel to select the track for editing. The track number will be shown in the display. 3 Use the number keys or SKIP keys on the remote control or SKIP keys ...

When this function is on and CD playback begins, the song fades in. When playback is finished, the song fades out. The length of the fade in/out to/from the normal level can be set between 0.5 and 10 seconds in 0.5 second increments (Default setting: OFF). 1 To set the fade operation, enter the fade...

External parallel control Restoring factory default settings 7 - Advanced operations The CD-01U Pro can be controlled from an external devices which supports a parallel interface via the CON- TROL I/O terminal on the rear panel. Pin No. Description In/Out 1 Stop tally Out 2 Skip (Back) In 3 Skip (Fo...

8 - Specifications Type Compact Disc player Discs 8 or 12cm (3.1 to 4.7inch) CD, CD-R/CD-RW Formats Audio CD (CD-DA), MP3 Number of channels 2-channel Resolution 16-bit Sampling frequency 44.1kHz Analog line outputs Connectors RCA Maximum Output level +6 dBV dBu Output impedance 1k Ø Analog line out...

TEAC CORPORATION Phone: +81-422-52-5082 www.tascam .com 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan TEAC AMERICA, INC. Phone: +1-323-726-0303 www.tascam.com 7733 Telegraph Road, Montebello, California 90640 TEAC CANADA LTD. Phone: +1905-890-8008 Facsimile: +1905-890-9888 www.tascam.com 5939...