Swisher LS934, LS622, LS826, LS10534D - Manuals

Page 2 - SAFETY DECALS; Replace decals immediately if damaged.

OD12 – HYDRAULIC FILL PLUG DECAL OD09 – DANGER/POSITION LOCK DECAL OD08 – OPERATOR INSTRUCTION DECAL OD16 – FUEL SHUT OFF DECAL OD07 – COLD WEATHER DECAL SAFETY DECALS Replace decals immediately if damaged. OD22 – POSITION LOCK DECAL OD23 – TOW POSITION DECAL

Page 3 - ASSEMBLY DETAIL; NOT ALL PARTS ARE ON ALL MODELS

ASSEMBLY DETAIL LS622, LS826, LS934 MODELS SEE DETAIL 1 2 3 B 4 5 6 7 8 9 10 A A 11 16 15 14 13 12 18 17 8 20 25 21 23 24 26 27 22 22 22 28 29 6 25 39 31 33 34 32 35 35 36 30 42 41 40 38 37 43 44 45 46 4748 49 50 42 16 51 55 18 52 54 53 52 58 57 56 49 6 5 SEE DETAIL NOT ALL PARTS ARE ON ALL MODELS 5...

Page 4 - SERVICE PARTS; Please have Model and Serial Numbers ready when ordering parts.

SERVICE PARTS Please have Model and Serial Numbers ready when ordering parts. Color cannot be guaranteed upon service parts. ITEM NUMBER DESCRIPTION PART NUMBER 1 RETURN HOSE 54" 7290 2 PRESSURE HOSE 48" 7289 3 #12 HOSE CLAMP LS5001 4 HYDRAULIC RESERVOIR 7319 5 1/2-13 X 3 1/2 GR5 BOLT NB577 ...

Page 5 - Pleas have Model and Serial Numbers ready when ordering parts.

SERVICE PARTS Pleas have Model and Serial Numbers ready when ordering parts. ITEM NUMBER DESCRIPTION PART NUMBER 29 MOTOR BASE / AXLE 7297 30 TIRE / WHEEL 7296 31 COTTER PIN NB633 32 WHEEL DUST COVER 2203DC 33 CASTLE NUT 2203CN 34 WASHER 2203W 35 TAPERED BEARING 2203B 36 BEARING SEAL 2203S 37 BELT 6...

Page 11 - Log Splitter V-Belt Replacement; : The Idler System is spring loaded. When replacing belt, be; Fig.1

Log Splitter V-Belt Replacement • Caution! : The Idler System is spring loaded. When replacing belt, be sure to lock lever to avoid accidental release. • Remove the (6) self-tapping screws that hold the belt cover on the bottom of the unit and remove the cover to allow access to the belt. Pullclutch...

Page 12 - Incorrect

Log Splitter V-Belt Replacement (Continued) ∀ • Check pulleys for alignment ∀ • Check Idler for freedom of rotation ∀ • Check to be sure Clutch Lever is straight and moves freely. See Fig.3 Incorrect Fig.3 • Install new belt • Replace pulley cover and (6) screws • Remove wedge from slot • Release cl...

Page 13 - Optional Extended Table For Log Splitter Kit No 7490; Assembly instructions

Optional Extended Table For Log Splitter Kit No 7490 This table is designed to fit both the Standard and the Deluxe Swisher Log Splitter. The Standardattachment slips over the beam pivot tube and attaches with the hitch pin through the vertical beam lockhole. The attachment to the Deluxe Splitter re...

Page 14 - Log Stripper and Table Detail; Log Stripper Installation Instructions

7641 4 3 2 1 8 7 6 5 Log Stripper and Table Detail Item # Description Part # Log Stripper Assembly Kit 7464 1 Stripper Weldment 7444TK 2 3/8-16 Nyloc Nut NB182 3 Stripper Spacer 7449TK 4 Stripper Bracket 7448TK 5 3/8-16 X 5 1/2 GR5 ZP NB575 Splitter Table Accessory Kit 7626 6 5/16-18 X 3/4 HCC GR2 Z...

Page 16 - LOG SPLITTER

OWNER’S MANUAL MODEL NO.LS622LS826LS934LS10534D HOW TO ORDERREPAIR PARTS : LOG SPLITTER Each Log Splitter has its own serial number. Each engine hasits own serial number. The serial number for the Log Splitterwill be found on the right hand side of the hydraulic oilreservoir. The serial number for t...

Swisher LS934, LS622, LS826, LS10534D - Manuals

Manuals:

Manual Swisher LS934, LS622, LS826, LS10534D

Summary

Swisher Manuals