Swisher ACR-500, ACR-500S - Manuals

Figure 1 ASSEMBLY INSTRUCTIONS STEP 1: ATTACH TONGUE TO AXLE Place tongue assembly(#4) and axle assembly(#1) on a flat surface. Position the tongue so that the diameter of 19mm x length of 118mm shaft welded to the tongue is straight up. Orientate the axle(#1) so the lift arm hinges welded to the ax...

STEP 8: ATTACHING RAKE ARMS Insert the rake wheel arm(#2) into the lift arm from in STEP 7. Secure rake wheel arm to the lift arm using lock pin attached to end of the lift cable. See figure 8 for rake arm position. Repeat procedure for the rake arm on opposite side. STEP 9: ATTACH RAKING WHEELS Att...

OPERATION AND MAINTENANCE SETTTING RAKE TINE WHEELS FOR THATCHING VS. RAKING 1. 1.. Acreage rake has been assembled for raking. See figure 14 . Note the direction of the tine tips. To position rake tine wheel assembly for thatching, remove lock pin from both lift arms and remove both rake tine wheel...

MAINTENANCE AND RECOMMENDATIONS FOR BEST RESULTS Operating Tip:Rake works for picking up Acorns or similar small particles other than grass/leaves RAKE TINE WHEEL MAINTENANCE: Following these recommendations will make the raking wheels last longer.1. It is recommended to mow or cut grass to 3” or le...

swisherinc.com MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE 1945 WHEN ORDERING PARTS, PLEASE HAVE THE FOLLOWING INORMATION AVAILABLE: * PRODUCT – ________________ * SERIAL NUMBER - _______________* MODEL NUMBER - _______________ TYPE - _______________ * PART NUMBER WITH PAINT CODE * PART DESCRIPT...