Swann SW242-4SN - Manuals

Swann SW242-4SN – Manual in PDF format online.

Manuals:

Manual

Manual Swann SW242-4SN

Summary

Page 3 - Contents

Contents Chapter 1: DVR Features ........................................................................................................................ 1 Chapter 2: DVR Layout .............................................................................................................................

Page 9 - Hard Drive Installation; Installing a Fixed SATA Hard Disk

5 3. Hard Drive Installation WARNING: Do not remove Hard Drive while DVR is running Ensure HDD jumpers are set to MASTER prior to inserting drive SW243-4MB / SW243-9MB has a hard drive pre-installed, please skip this step. 3.1 Installing a Fixed SATA Hard Disk 1 - Unlock and remove hard drive drawer...

Page 11 - DVR will detect the installed hard; SEL; ] to format or press; MENU; After connecting the power adapter

7 5. Starting the DVR 5.1 Firmware Version 5.2 Detecting Installed Hard Drive 5.3 Format Hard Drive DVR will detect the installed hard drive and display the hard drive information. When the DVR detects a new hard drive you will be prompted to format the hard drive before using the DVR Press [ SEL ] ...

Page 13 - Refer to 6.4 Record Setup; Record Setup

9 6.3 Camera Setup Note: If a camera channel is set to off it will not record ( Refer to 6.4 Record Setup ) 6.4 Record Setup 6.5 Record Frame rate Press ▲ , ▼ , ◄ or ► button to select a channel, and then press [ SEL ] to increase the value or press [ ■ STOP] to reduce the value. Note: Higher frame ...

Page 16 - HDD USED; : indicates the space used in the hard disk drive for recording and; Miscellaneous Setup - Change Password

12 6.11 Hard Drive Setup This section will display the current hard drive status and usage options HDD SIZE: indicates the total capacity of the hard drive installed in the DVR HDD USED : indicates the space used in the hard disk drive for recording and the percentage used HDD FORMAT: will erase all...

Page 17 - Miscellaneous Setup - Hidden Channel

13 6.13 Miscellaneous Setup - Set Time 6.14 Miscellaneous Setup - Hidden Channel S Enter the current password first, and then enter six characters as your new password, repeat the new password to confirm. If you forget your password, please contact technical support for assistance. The system date a...

Page 18 - Miscellaneous Setup - Audio Port Setup

14 6.15 Miscellaneous Setup - Audio Port Setup 6.16 Miscellaneous Setup - PTZ Setup Press [ SEL ] to select the camera, press ◄ or ► button to assign the ID. 6.17 Miscellaneous Setup - Auto Record For 4-channel DVR, there are 2 audio inputs. For 9-channel DVR, there is 1 audio input. You can select ...

Page 19 - Miscellaneous Setup - Auto Sequence; To activate Auto Sequence mode, press [ ] button during monitoring or; channel selection buttons.; Miscellaneous Setup - Image Parameters

15 6.18 Miscellaneous Setup - Auto Sequence To activate Auto Sequence mode, press [ ] button during monitoring or recording mode. To exit auto sequence display, press [ MENU ] or any of channel selection buttons. 6.19 Miscellaneous Setup - Keypad Tones ' 6.20 Miscellaneous Setup - Image Parameters Y...

Page 20 - Miscellaneous Setup - Password Enable; Select a VGA resolution match to your CRT or LCD monitor.; NOTE: VGA video output is an optional function and may not be

16 6.21 Miscellaneous Setup - Password Enable 6.22 Miscellaneous Setup - VGA Setup Select a VGA resolution match to your CRT or LCD monitor. NOTE: VGA video output is an optional function and may not be available on all models CON: Contrast BRI: Brightness HUE: Hue SAT: Saturation Press ▲ or ▼ to se...

Page 22 - SUBNET MASK; : Subnet Mask is used

18 [NOTE] To adjustment the IP ADDRESS ， SUBNET MASK and GATEWAY value, only when the [STATIC] mode is being selected. SUBNET MASK : Subnet Mask is used to determine what subnet an IP address belongs to. A number that is used to identify a sub network so that IP addresses can be recognized on a loca...

Page 23 - DDNS SETUP; If you require an external

19 . HTTP PORT: This port number is used to communicate with PC Client. The default value is 80. USER SETUP: When accessing the DVR from a remote location you will be prompted for a login and password. The default is “admin” for full administrator rights. Set “User ID” and password to setup a user w...

Page 24 - This function is only available for the model SW243-9MB / SW242-9SN

20 LAN-DVR Connection See the diagram below for steps to connect your DVR to a local area network or the internet. For remote monitoring from your computer ， you must have a LAN connection available or broadband Internet access. You need to register a www.dyndns.org to get a free account .After regi...

Page 26 - Start Recording; ] record button to start recording according to the record; BACKUP TO

22 Chapter 7: Record Please read Chapter 8 about how to play back your recorded video. 6.25 Reset Menu If you select this item, the system will restore all your settings to factory default values. You need to enter your password to reset the menu. 7.1 Start Recording Press [ ● ] record button to sta...

Page 27 - Normal; Standard; PAL Highest 64

23 [ ● ]: the red dot next to the channel name indicates that the channel is being recorded. [ A-REC ]: indicates the current record schedule is set to be NORMAL-RECORD mode. [ S-REC ]: indicates the current record schedule is set to be SENSOR-RECORD mode. [ N-REC ]: indicates the current record sch...

Page 29 - Chapter 9: USB Programming; Program Interface

25 Chapter 9: USB Programming (optional) 9.1 Driver Installation: 9.2 Program Interface Button functions: 1. Insert driver CD into your CD-ROM Drive. 2. Open CD directory. 3. Double click on the install applications. 4. Run “Install” program. 5. Follow the setup wizard to finish the installation. 6 ...

Page 30 - program running; ” will appear in the system tray

26 1.PTZ Control 11.Convert Streams to AVI file 2.Zoom in ， Zoom Out 12.Back one frame 3.HDD Play Mode 13. Record 4.File Play Mode 14.stop 5.Net Play Mode 15.Play 6.Event List 16.pause 7.Control Panel 17.fast forward 8. Remote DVR Control 18.forward one frame 9.Change Storage Device 19.Playback Slid...

Page 31 - configure the program local settings

27 Press to configure the program local settings Press to play video. FILE play mode: only when you plug a USB Memory stick into your PC (9 Channel)

Page 33 - Chapter 10: Specifications

29 Chapter 10: Specifications 4 / 9-Channel DVR Items Descriptions Video Standard NTSC ， PAL Video Input/Output 4 Channels/2 Channels ， 9 Channels/1 Channel Audio Input/Output 2 Channels/2 Channels ， 1 Channel/1 Channel Resolution NTSC:720X480@30fps(Each Ch) PAL:720X576@25fps(Each Ch) Monitoring Fea...

Page 34 - Chapter 11: Appendix; System connection diagram

30 Chapter 11: Appendix 11.1 System connection diagram

Page 36 - Swann Technical Support

32 Swann Technical Support Swann Technical Support is available for any inquiries you may have. Website: www.swannsecurity.com USA/Canada: 1-800-627-2799, 1-877-274-3695 Australia: 1300 13 8324 Email: [email protected]