Supermicro AOC-R1UG-IBQ - Manuals

Page 3 - Table of Contents; Chapter 1 Safety Guidelines; -1 ESD Safety Guidelines; Chapter 2 Card Components; -1 Hardware Installation

iii Table of Contents Chapter 1 Safety Guidelines .......................................................... 1-1 1-1 ESD Safety Guidelines ..................................................................... 1-1 1-2 General Safety Guidelines ............................................................

Page 4 - Notes

Page 5 - Introduction; About this Manual

v Introduction About this Manual This manual is written for system integrators, PC technicians and knowledgeable PC users who intend to integrate SuperMicro's AOC-R1UG-IBQ add-on card to their system. This add-on card is used to add an InfiniBand port to the H8DGG-QF serverboard. Product Features Th...

Page 6 - Operating Systems Supported; An Important Note to Users

AOC-R1UG-IBQ Add-on Card User’s Guide vi Operating Systems Supported The AOC-R1UG-IBQ add-on card supports the following Operating Systems (OS): • Windows 2003/Windows 2008 • VMware ESX Server 3.5 • SLES • RedHat • Fedora • CCS 2003 An Important Note to Users All images and layouts shown in this use...

Page 7 - Contacting SuperMicro

vii Contacting SuperMicro Headquarters Address: Super Micro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: [email protected] (General Information) [email protected] (Technical Support) Web Site: www.supermicro.com Europe Addres...

Page 9 - ESD Safety Guidelines; General Safety Guidelines

1-1 Chapter 1 Safety Guidelines To avoid personal injury and property damage, carefully follow all the safety steps listed below when accessing your system or handling the components. 1-1 ESD Safety Guidelines Electric Static Discharge (ESD) can damage electronic components. To prevent damage to you...

Page 11 - Front Components; Front Connectors, Jumpers and LEDs; QSFP Port

2-1 Chapter 2 Card Components 2-1 Front Components Figure 2-1 shows the front components of the AOC-R1UG-IBQ add-on card. Table 2-1 lists the add-on card’s front components and their description. 2-2 Front Connectors, Jumpers and LEDs This section describes the front connectors, jumpers and LEDs fou...

Page 13 - Hardware Installation; Before Installation; Installation

3-1 Chapter 3 Installation 3-1 Hardware Installation User the directions below to install the AOC-R1UG-IBQ add-on card into your system. Before Installation Before Installation, do the following 1. Power down the system. 2. Remove the power cord from the wall socket. 3. Use industry standard anti-st...

Page 14 - Installing Drivers and Firmware; Linux Drivers; Windows Drivers

AOC-R1UG-IBQ Add-on Card User’s Manual 3-2 7. Plug the power cord into the wall socket and power up the system. 3-2 Installing Drivers and Firmware Use the procedures below to install both drivers and firmware for the AOC-R1UG-IBQ add-on card for both Linux and Windows. Linux Drivers Use the followi...

Page 15 - Chapter 3: Installation; Firmware Update Procedures

3-3 Chapter 3: Installation 3. Double-click to run and install the driver package file. Firmware Update Procedures Use the following procedures for updating the AOC-R1UG-IBQ add-on card firmware for both the Linux and Windows operating systems. Updating Firmware for the Linux Operating System 1. Fro...

Page 17 - Disclaimer

Disclaimer The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to perform be reasonably expect...