SunBrite SB-WM-ART2-XL-BL - Manuals

Page 2 - WARNING; HARDWARE

2 WARNING The maximum weight of this wall mount is 150 lbs (68.04 kg). Use with heavier than the maximum weight indicated may result in instability causing possible injury. Ensure these instructions are thoroughly understood before attempting installation. If unsure of any part of the installation p...

Page 3 - INSTALLATION; Layout and Drilling; Wall Mounting of Arm Assembly; Figure 1

3 INSTALLATION Layout and Drilling 1. Determine general location of the TV. 2. Use a stud finder to find the nearest wall studs if applicable and mark their location. 3. Tape template flat and level to wall surface, aligning the template’s slots with the stud markings on the wall. N O T E : Use of a...

Page 4 - Assemble TV Bracket; Figure 2A; Figure 3A

4 Assemble TV Bracket Lay the TV flat on a soft, flat surface and locate the four VESA mounting bracket holes, then determine the VESA pattern and prepare the TV bracket and adapters accordingly. Medium Displays (Up to VESA 400X400) 1. Assemble the four SunBrite adapter arms on the TV adapter plate ...

Page 5 - Attach TV to Arm Assembly; Figure 4; Cable Cover Attachment; Figure 8

5 Attach TV to Arm Assembly AT T E N T I O N : This procedure requires two persons to perform. The instructions in this step are the same for all TV sizes. 1. Pull the head of the arm assembly out from the wall and move the tilt adjustment down as much as possible. (Fig.4) 2. Insert two bolts (BB) i...

Page 6 - Adjustments; Tilt Adjustment; Figure 9; Lifetime Limited Warranty

6 Adjustments Tilt Adjustment Loosen the tilt levers on the head of the arm assembly enough to allow controlled adjustment. Set the desired tilt, then re-tighten the locking levers. (Fig.9) Once the tilt levers are locked, their position can be adjusted by pulling out on each lever and rotating it t...

SunBrite SB-WM-ART2-XL-BL - Manuals

Manuals:

User Manual SunBrite SB-WM-ART2-XL-BL

Summary

SunBrite TV Brackets Manuals