SunBrite SB-S2-43-4K-BL - Manuals

Page 3 - SunBriteTV Signature 2 Series 4K Ultra HD Operator’s Manual

SunBriteTV Signature 2 Series 4K Ultra HD Operator’s Manual Page 3

Page 4 - IMPORTANT SAFETY INSTRUCTIONS; TV must be plugged into a GFCI receptacle.; NOTE TO CATV SYSTEM INSTALLER:; Important Safety Instructions

Page 2 Dear SunBriteTV Customer:Congratulations on the ownership of your SunBriteTV all-weather outdoor LCD TV, and welcome to the family of satisfied SunBrite customers. You are in great company, with thousands of homeowners and esteemed commercial facilities such as Yankee Stadium, Fenway Park, Di...

Page 5 - Cleaning Instructions:; See “Care of SunBriteTV” on page 36.; Precautions when Transporting the TV:; Carrying the television requires at least two people.; FCC Statement

SunBriteTV Signature 2 Series 4K Ultra HD Operator’s Manual Page 3 Cleaning Instructions: See “Care of SunBriteTV” on page 36. Attachments: Do not use attachments not specifically recommended by the manufacturer. Use of improper attachments can result in accidents. Power Source: SunBriteTV must oper...

Page 7 - Table of Contents

SunBriteTV Signature 2 Series 4K Ultra HD Operator’s Manual Page 5 Page 5 Table of Contents Important Safety InstructionsTable of ContentsSupplied AccessoriesTV Installation Choose a Location for the TV Rear Panel Internal Connect Source Rear Panel Connection Diagrams Side Panel and Front Panel Cont...

Page 8 - Supplied Accessories; Unpacking

Page 6 Supplied Accessories Unpacking After unpacking the SunBriteTV television, please make sure that the following items are included in the carton and that they are in good condition. If items are damaged or missing, contact your dealer immediately. SunBriteTV LCD Television Operator’s Manual Rem...

Page 9 - TV Installation - Choose a Location for the TV; Choose a Location for the TV; Important: The TV must be installed at least 5

SunBriteTV Signature 2 Series 4K Ultra HD Operator’s Manual Page 7 TV Installation - Choose a Location for the TV Choose a Location for the TV Important: The TV must be installed at least 5 feet from pool, spa, or other body of water. The TV should be installed so the screen is not facing direct sun...

Page 10 - Internal Connect Source through the cable access door.; Figure 1; TV Installation - Connecting the Power Cord; FEET AWAY FROM STANDING WATER , SUCH AS (BUT NOT LIMITED; Route cables trough the; Figure 3

Page 8 TV Installation – Rear Panel Internal Connect Source - Cable routing WARNING: Do not connect the power source before making connections. Internal Connect Source through the cable access door. The Internal Connect Source allows you to easily connect to the Audio, Video, VGA, HDMI, Audio Out, a...

Page 11 - TV Installation – Rear Panel Connections; Connections; VGA STEREO INPUT

SunBriteTV Signature 2 Series 4K Ultra HD Operator’s Manual Page 9 TV Installation – Rear Panel Connections Connections 1. 2.5mm power jack - 12v @ 3amps Auxillary power supply 2. 5 pin din jack - SunBriteTV optional speaker bar connection output. 3. Direct IR input 3.5mm Jack 4. IR WINDOW - Rear IR...

Page 12 - Connections continued

Page 10 18. HDbaseT - HD/UHD extender receiver. Bottom Blue LED - indicates board power Top Green LED - when lit indicates positive link to a HDBaseT transmitter Left RJ45 Yellow LED - flashing = non-HDCP video transmitting/steady = HDCP video transmitting Right RJ45 Green LED - Link from transmitte...

Page 13 - Connection Descriptions:; cable required for, not included

SunBriteTV Signature 2 Series 4K Ultra HD Operator’s Manual Page 11 TV Installation – Rear Panel Connections Red Green Blue Yellow Green Red White Connection Descriptions: Cable Descriptions: Legacy component input, 3.5mm to RCA cable required for, not included SunBrite Part Number CBL-35MM-COMP

Page 14 - Switching Sources for Ports:

Page 12 TV Installation – Rear Panel Connections Switching Sources for Ports: Your SunBrite TV offers several options when connecting your devices to the TV. The chart below will help you understand which source you switch to for each of the ports. CONNECTING TO AN ANTENNA 1. Make sure the power to ...

Page 15 - TV Installation – Rear Panel Connection Diagrams; Connecting to Cable or Antenna through VCR

SunBriteTV Signature 2 Series 4K Ultra HD Operator’s Manual Page 13 TV Installation – Rear Panel Connection Diagrams CONNECTING TO AN ANTENNA--(Continued) Connecting to Cable or Antenna through VCR 1. Make sure the power of the TV is turned off.2. Make sure there is an antenna or cable connection to...

Page 16 - Connecting with

Page 14 TV Installation – Rear Panel Connection Diagrams CONNECTING TO A DVD PLAYER (Continued) 1. Make sure the power of the TV and your DVD player is turned off. 2. Obtain a Yellow Video Cable. Connect the Yellow Video connector to both your DVD player and Composite’s Yellow Video connector port o...

Page 17 - CONNECTING TO A SATELLITE OR CABLE SET-TOP BOX

SunBriteTV Signature 2 Series 4K Ultra HD Operator’s Manual Page 15 TV Installation – Rear Panel Connection Diagrams CONNECTING TO A SATELLITE OR CABLE SET-TOP BOX 1. Make sure the power of the TV and your set-top box is turned off. 2. Connect a HDMI cable to the HDMI output of your set-top box and ...

Page 19 - CONNECTING TO AN EXTERNAL AMPLIFIER OR AMPLIFIED SPEAKERS

SunBriteTV Signature 2 Series 4K Ultra HD Operator’s Manual Page 17 TV Installation – Rear Panel Connection Diagrams 1. Make sure the power of the TV and your receiver is turned off.2. Obtain a optical cable, connect it to your receiver’s optical digital input and the optical audio out jack on the T...

Page 21 - Warning: TV must be installed at least 5 feet away from

SunBriteTV Signature 2 Series 4K Ultra HD Operator’s Manual Page 19 TV Installation - Connecting the Power Cord Power Turn on the TV by pressing the button once. Press the button again to turn off the TV. Input This button switches between the different sources of the TV. When the On-Screen Display ...

Page 22 - Remote Control Guide; About the Water-Resistant Remote Control; Picture In Picture/Picture On Picture

Page 20 Remote Control Guide About the Water-Resistant Remote Control The SunBriteTV Water-Resistant Remote Controller is engineered to give you many years of service. “Water-resistant” means that the remote control can be in water for short periods of time without damaging the internal workings of ...

Page 23 - On-Screen Display Functions; Menu; Via the Remote Control; Adjusting the On Screen Display (OSD) from the Remote; Via the TV Side Panel Buttons; Adjusting the On Screen Display from the TV Side Panel

SunBriteTV Signature 2 Series 4K Ultra HD Operator’s Manual Page 21 On-Screen Display Functions Menu - This button opens the OSD CH + p - This button changes the channel to a higher number and also functions the up direction of OSD buttons to move the cursor to the item to be selected. CH - q - This...

Page 24 - On-Screen Display Menu; • Channel option only available when the TV input is selection.

Page 22 On-Screen Display Menu Your TV has been factory-set to plug-in and enjoy your programming. In the event you turn on the TV and get the message, “Please run Channel Auto Scan,” press your remote’s Menu button, press the Channel function and press Auto Scan. Note: To run the Channel function, ...

Page 25 - Time Menu

SunBriteTV Signature 2 Series 4K Ultra HD Operator’s Manual Page 23 Sound Menu. This menu manages sound functions including: Sound Mode Balance Auto Volume SPDIF Mode SRS TruSurround Audio Only Speaker On-Screen Display Menu (continued) Time Menu This menu manages Time functions including: Auto Sync...

Page 27 - Adjusting On-Screen Displays – Channel Menu; Signal Information; qp; Press menu to interupt the learning process,

SunBriteTV Signature 2 Series 4K Ultra HD Operator’s Manual Page 25 Adjusting On-Screen Displays – Channel Menu The Channel Menu (figure 25-1) is available only when TV is selected as the source. To select TV as the source, push the SOURCE button on the remote repeatedly until TV comes up as the sou...

Page 28 - Channel Edit

Page 26 Adjusting On-Screen Displays – Channel Menu (continued) Channel Edit Press the qp buttons to highlight the desired channel and Press <enter> The channel will be displayed Using the Add q button on the remote you can change the text name of the learned channel. Using the Delete p button...

Page 29 - Adjusting On-Screen Displays – Picture Menu

SunBriteTV Signature 2 Series 4K Ultra HD Operator’s Manual Page 27 Adjusting On-Screen Displays – Picture Menu Picture Mode Press the qp buttons to highlight Picture Mode, press <enter>, then use t u to select presets StandardDynamicOptiView SunBrite DayOptiview SunBrite NightUserAuto(PC) - V...

Page 30 - Adjusting On-Screen Displays – Sound Menu

Page 28 Adjusting On-Screen Displays – Sound Menu 1. Press qp buttons on the remote or CH+/CH- on the TV) to move the cursor to the item to be selected. 2. Press t u buttons on the remote or VOL+/VOL- on the TV to make the desired adjustments. 3. When your adjustments are complete, press MENU or EXI...

Page 31 - Adjusting On-Screen Displays – Time Menu

SunBriteTV Signature 2 Series 4K Ultra HD Operator’s Manual Page 29 Adjusting On-Screen Displays – Time Menu Auto Sync Press the qp buttons to highlight the Auto Sync adjustment, then use t u to turn auto sync on and off. Auto sync automatically sets the time on your TV based on information from TV ...

Page 32 - Adjusting On-Screen Displays – Lock Menu; System Lock

Page 30 Adjusting On-Screen Displays – Lock Menu 1. Press qp buttons on the remote or CH+/CH- on the TV) to move the cursor to the item to be selected. 2. Press t u buttons on the remote or VOL+/VOL- on the TV to make the desired adjustments. 3. When your adjustments are complete, press MENU or EXIT...

Page 33 - Adjusting On-Screen Displays – Option Menu; Menu Language

SunBriteTV Signature 2 Series 4K Ultra HD Operator’s Manual Page 31 Adjusting On-Screen Displays – Option Menu 1. Press qp buttons on the remote or CH+/CH- on the TV) to move the cursor to the item to be selected. 2. Press t u buttons on the remote or VOL+/VOL- on the TV to make the desired adjustme...

Page 34 - Color Range; Network Configuration

Page 32 Adjusting On-Screen Displays – Option Menu (continued) Color Range Press the qp buttons to highlight Color Range, then use <enter> to select Auto, 16-235, or 0-255. Auto, the TV will select color range based on the input and source content. 0-255, typically used for PC content 16-235, ...

Page 35 - Adjusting On-Screen Displays – Option Menu Page 2 (continued); Quick Start Mode; Power On Mode; Restore Factory Default

SunBriteTV Signature 2 Series 4K Ultra HD Operator’s Manual Page 33 Adjusting On-Screen Displays – Option Menu Page 2 (continued) Quick Start Mode Press the qp buttons to highlight the Quick Start Mode, then use t u to turn select on and off. Quick start mode, On by default, allows the TV to turn on...

Page 36 - Ambient Light Sensor; Ambient Sensor Value; Auto Backlight Floor; Backlight Sensor Floor

Page 34 Ambient Light Sensor Note the Ambient sensor function is only available when the User Picture mode is selected. Press the qp buttons to highlight the Ambient Light Sensor adjustment, then use t u to turn the ambient light sensor on and off. The ambient light sensor automatically measures amb...

Page 37 - Accessing the USB input; Viewing Pictures from the USB Flash

SunBriteTV Signature 2 Series 4K Ultra HD Operator’s Manual Page 35 Menu - Media Photos Using the USB input on the rear panel of the TV, you can access material stored on a USB stick. The material can be MP3 or WAV music files, or JPEG or BMP pictures. The TV is not configured to play user Videos fr...

Page 38 - Listening MP3 Audio from the USB Stick; Menu - Media MP3 Audio

Page 36 Accessing the USB input Press the Menu button on the remote or on the side control panel of the TV, then press qp buttons to highlight Media and press <enter>. Select Music or Photo and press <enter> If a USB flash drive can be accessed by the TV it will display as shown, press &...

Page 40 - Troubleshooting

Page 38 Troubleshooting The following table contains the common problems and the solutions to these problems. Please check this list before you contact the technicians. Trouble Solutions No picture Check the following: Power cord is connected correctly. Power is turned on.The video cable is connecte...

Page 41 - Care of SunBriteTV; Caring for the LCD Panel:; blown objects from scratching the surface of the panel.; To order a Dust Cover; General Cleaning; Snow and Ice; Use a soft brush and towel to remove snow and ice from the unit.

SunBriteTV Signature 2 Series 4K Ultra HD Operator’s Manual Page 39 Care of SunBriteTV Caring for the LCD Panel: 1. Cleaning the LCD Panel: With your TV turned off, gently wipe the surface of the display panel with a damp (with water) microfiber, cotton or flannel cloth. (Do not use tissues, rags, s...

Page 42 - Specifications; Dimensions

Page 40 LCD Screen 43-inch diagonal Color Active Matrix TFT LED LCD Resolution 3840 x 2160 UHD 4k Aspect Ratio 16:9 Blacklight Brightness - Surface Luminance, white 700 nits (cd/m2) Contrast Ratio 3000:1 Viewing Angle 178 o x 178 o Response Time 8 milliseconds TV formats 2160p*,1080p, 1080i, 720p, 7...

Page 46 - SunBriteTV Pixel Quality Policy; SunBriteTV’s Pixel Quality Policy; products, and is not specific to SunBriteTV.; Features Information and Instructions; Extreme Climate Warning; If temperatures below -24

Page 44 When programming a DirectTV, local cable universal remote control or Control system, you may find that SunBriteTV may not be on the list of TV manufacturers. If that is the case, your SunBriteTV supports SONY’s universal remote code. Programming Other Manufacturers’ Universal Remote Control ...

Page 47 - Appendix A - RS232 Control Cable Pinout; The photo to the right s; The end of the Emitter is to be mounted in front of

SunBriteTV Signature 2 Series 4K Ultra HD Operator’s Manual Page 45 Appendix A - RS232 Control Cable Pinout IR Emitter Installation To install the IR Emitter: The photo to the right s hows an IR Emitter* installed. The end of the Emitter is to be mounted in front of the IR Emitter Window. Place the ...

Page 48 - Appendix B - RS232 Control Codes

Page 46 RS 232 Control codes SunbriteTV Rev. 05/31/2016 Com Spec: 9600,8,1,n Function ASCII HEX Command Received Response from TV to control system Command Executed Response from TV to control system Model Class ID [ESC]? 1B 3F [B3220AHD-X.XX] or na [B4610AHD-X.XX] Firmware Version [ESC]? 1B 2E XXXX...

SunBrite SB-S2-43-4K-BL - Manuals

Manuals:

User Manual SunBrite SB-S2-43-4K-BL

Summary

SunBrite TVs Manuals