Sunbeam SR8700 - Manuals

Before first use Remove any adhesive stickers, plastic covers or cardboard sleeves from the soleplate. Ensure that all adhesive is removed by rubbing the soleplate with a cloth dampened with methylated spirits.Fill the water tank and empty the water. This will rinse out any foreign particles remaini...

After each use 1. Turn the power off and remove the plug from the power outlet. 2. Allow the iron to cool before storing. Storage Empty the water tank before storage.Always store the iron on the base of the steam generator. Insert the power cord into the storage compartment. Wrap the steam cord arou...

Trouble Shooting Guide 14 Problem Possible Reason Solution Water is spitting from the soleplate. The temperature of the soleplate is set below the Silk setting. Turn the soleplate temperature up to Silk or above and wait for the soleplate to reach the selected temperature. Before using the steam gen...

15 Tip # 1 - Iron shirts like a pro Start with the collar, working from the outer edges into the middle. Iron the shoulder next, followed by the cuffs and sleeves. Place the collar at the narrow end of the board so that one front panel of the shirt is extended flat. Iron the front panel from shoulde...

Ironing Chart Fabric Temperature Setting Ironing recommendation Acrylic • Dry iron on wrong side Acetate • Dry iron on wrong side while still damp or use spray to dampen Silk • • Iron on wrong side. Use an ironing cloth to prevent shine marks Nylon • • Iron on wrong side while still damp or use spra...

Should you experience any difficulties with your appliance, please phone our customer service line for advice on 1300 881 861 in Australia, or 0800 786 232 in New Zealand. Alternatively, you can send a written claim to Sunbeam at the address listed below. On receipt of your claim, Sunbeam will seek ...