Sunbeam FA7450 - Manuals

1. Locate the two halves of the base.2. Remove the two butterfly screws from underneath the tower section of the fan and set aside. 3. Feed the power cord between the two halves of the base. See Figure 1. 4. Clip the two halves of the base together, ensuring the cord remains within the channel forme...

Remote Control 6 Remote control Operates within 8 metres of the Tower Fan. Fan speed button Choose from 3 speed settings, low medium or high. Wind Mode You have a choice of 2 Nature or Sleep airflow types.When used in nature mode, the fan speed is randomly adjusted, giving the feeling of a natural b...

7 Switching the fan on 1. Place the fan on a level surface.2. Insert the plug into a 230/240V power outlet and turn the power on. 3. Press the power button on/off.4. Press the fan speed button to select low, medium or high depending on your preference. Switching the fan off • To switch the fan off, ...

11 If your tower fan fails to operate check the following: • Make sure the electrical outlet or circuit breaker is working. • Check for obstructions around the air intake grill. If your remote control fails to operate check the following: • Ensure that you point the remote towards the front of the f...

Should you experience any difficulties with your appliance, please phone our customer service line for advice on 1300 881 861 in Australia, or 0800 786 232 in New Zealand. Alternatively, you can send a written claim to Sunbeam at the address listed below. On receipt of your claim, Sunbeam will seek ...

is a registered trademark. Need help with your appliance? Contact our customer service team or visit our website for information and tips on getting the most from your appliance. In Australia Visit www.sunbeam.com.au Or call 1300 881 861 In New Zealand Visit www.sunbeam.co.nz Or call 0800 786 232 Ma...

1. Locate the two halves of the base.2. Remove the two butterfly screws from underneath the tower section of the fan and set aside. 3. Feed the power cord between the two halves of the base. See Figure 1. 4. Clip the two halves of the base together, ensuring the cord remains within the channel forme...

Remote Control 6 Remote control Operates within 8 metres of the Tower Fan. Fan speed button Choose from 3 speed settings, low medium or high. Wind Mode You have a choice of 2 Nature or Sleep airflow types.When used in nature mode, the fan speed is randomly adjusted, giving the feeling of a natural b...

7 Switching the fan on 1. Place the fan on a level surface.2. Insert the plug into a 230/240V power outlet and turn the power on. 3. Press the power button on/off.4. Press the fan speed button to select low, medium or high depending on your preference. Switching the fan off • To switch the fan off, ...

11 If your tower fan fails to operate check the following: • Make sure the electrical outlet or circuit breaker is working. • Check for obstructions around the air intake grill. If your remote control fails to operate check the following: • Ensure that you point the remote towards the front of the f...

Should you experience any difficulties with your appliance, please phone our customer service line for advice on 1300 881 861 in Australia, or 0800 786 232 in New Zealand. Alternatively, you can send a written claim to Sunbeam at the address listed below. On receipt of your claim, Sunbeam will seek ...

is a registered trademark. Need help with your appliance? Contact our customer service team or visit our website for information and tips on getting the most from your appliance. In Australia Visit www.sunbeam.com.au Or call 1300 881 861 In New Zealand Visit www.sunbeam.co.nz Or call 0800 786 232 Ma...