Sun Microsystems SG-XPCIE2FCGBE-E-Z - Manuals

Page 3 - Contents

iii Contents Declaration of Conformity vii Safety Agency Compliance Statements ix Regulatory Compliance Statements xxi Preface xxiii 1. HBA Overview 1 Kit Contents 1 HBA Features and Specifications 1 Operating System and Technology Requirements 3 System Interoperability 4 Host Platform Support 5 Sto...

Page 4 - HBA Software Installation

iv Sun StorageTek Dual 4 Gb FC Dual GbE HBA, Emulex Installation Guide • July 2008 Observing ESD and Handling Precautions 9 Installing the Hardware 10 ▼ To Install the HBA 10 ▼ To Connect the Optical Cable 12 ▼ To Connect the Ethernet Cable 14 ▼ To Apply Power 14 Testing the Installation 17 ▼ To Ver...

Page 7 - Declaration of Conformity; EMC; Supplementary Information:

vii Declaration of Conformity EMC USA—FCC Class A This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This equipment may not cause harmful interference.2. This equipment must accept any interference that may cause undesired operation. Canada...

Page 9 - Safety Precautions; Symbols; SELV Compliance

ix Safety Agency ComplianceStatements Read this section before beginning any procedure. Thefollowing text provides safety precautions to follow wheninstalling a Sun Microsystems product. Safety Precautions For your protection, observe the following safetyprecautions when setting up your equipment: ■...

Page 10 - Caution –; Caution –; Battery Warning; Caution –

x Sun StorageTek Dual 4 Gb FC Dual GbE HBA, Emulex Installation Guide • July 2008 products). To reduce the risk of electric shock,do not plug Sun products into any other typeof power system. Contact your facilitiesmanager or a qualified electrician if you arenot sure what type of power is supplied t...

Page 11 - System Unit Cover; Rack System Warning; Laser Compliance Notice; Conformité aux normes de sécurité; Mesures de sécurité

Safety Agency Compliance Statements xi System Unit Cover You must remove the cover of your Sun computer systemunit to add cards, memory, or internal storage devices. Besure to replace the cover before powering on your computersystem. Caution – Do not operate Sun products without the cover in place. ...

Page 13 - Mise en garde relative aux batteries

Safety Agency Compliance Statements xiii utilisés avec des ordinateurs. N'utilisez jamaisde cordon d'alimentation à usage domestiqueavec les produits Sun. L'avertissement suivant s'applique uniquement auxsystèmes équipés d'un interrupteur Veille: Attention – L'interrupteur d'alimentation de ce produ...

Page 14 - Einhaltung sicherheitsbehördlicher

xiv Sun StorageTek Dual 4 Gb FC Dual GbE HBA, Emulex Installation Guide • July 2008 Avis de conformité des appareils laser Les produits Sun qui font appel aux technologies lasers sontconformes aux normes de la classe 1 en la matière. Périphériques CD et DVD L'avertissement suivant s'applique aux pér...

Page 15 - Lautstärke; Warnung bezüglich Batterien; Achtung –; Gehäuseabdeckung

Safety Agency Compliance Statements xv tung dieser Richtlinien kann Überhitzungverursachen und die Zuverlässigkeit IhresSun-Geräts beeinträchtigen. Lautstärke Produkt: Sun StorageTek Dual 4 Gb FC Dual GbE HBA, Emulex Gemäß den Vorgaben in der Norm ISO 7779 beträgt derGeräuschpegel dieses Geräts in A...

Page 16 - Warnungen bezüglich in Racks eingebauter; Normativas de seguridad; Medidas de seguridad

xvi Sun StorageTek Dual 4 Gb FC Dual GbE HBA, Emulex Installation Guide • July 2008 Achtung – Nehmen Sie Sun-Geräte nicht ohne Abdeckung in Betrieb. DieNichtbeachtung dieses Warnhinweises kannVerletzungen oder Geräteschaden zur Folgehaben. Warnungen bezüglich in Racks eingebauter Systeme Die folgend...

Page 18 - Advertencia sobre las baterías

xviii Sun StorageTek Dual 4 Gb FC Dual GbE HBA, Emulex Installation Guide • July 2008 de tierra situada cerca del sistema y de fácilacceso. No conecte el cable de alimentación sila unidad de alimentación no se encuentra enel bastidor del sistema. La siguiente medida solamente se aplica a aquellosdis...

Page 19 - Nordic Lithium Battery Cautions

Safety Agency Compliance Statements xix Dispositivos de CD y DVD La siguiente medida se aplica a los dispositivos de CD yDVD, así como a otros dispositivos ópticos: Precaución – La utilización de controles, ajustes o procedimientos distintos a los aquíespecificados puede dar lugar a niveles deradiac...

Page 21 - Regulatory Compliance Statements; FCC Class A Notice

xxi Regulatory Compliance Statements Your Sun product is marked to indicate its compliance class: • Federal Communications Commission (FCC) — USA • Industry Canada Equipment Standard for Digital Equipment (ICES-003) — Canada • Voluntary Control Council for Interference (VCCI) — Japan • Bureau of Sta...

Page 22 - BSMI Class A Notice

xxii Sun StorageTek Dual 4 Gb FC Dual GbE HBA Installation Guide • June 2008 BSMI Class A Notice The following statement is applicable to products shipped to Taiwan and marked as Class A on the product compliancelabel. CCC Class A Notice The following statement is applicable to products shipped to C...

Page 23 - Preface; Before You Read This Book; SunVTS 6.X Users Guide; How This Document Is Organized; Chapter 1

xxiii Preface This installation guide describes how to install and remove the Sun StorageTek™Dual 4 Gigabit (Gb) Fibre Channel (FC) Dual Gigabit Ethernet (GbE) host busadapter (HBA), Emulex. It also explains how to verify the driver version and installany necessary patches. The document is written f...

Page 24 - Chapter 4; Using UNIX Commands; This document might not contain information on basic UNIX; Shell Prompts

xxiv Sun StorageTek Dual 4 Gb FC Dual GbE HBA, Emulex Installation Guide • July 2008 Chapter 4 contains known issues with this release of the HBA. Using UNIX Commands This document might not contain information on basic UNIX ® commands and procedures such as shutting down the system, booting the sys...

Page 25 - Typographic Conventions; Note –; su

Preface xxv Typographic Conventions Note – Characters display differently depending on browser settings. If characters do not display correctly, change the character encoding in your browser to UnicodeUTF-8. Documentation, Support, and Training Typeface Meaning Examples AaBbCc123 The names of comman...

Page 26 - Third-Party Web Sites; Sun StorageTekTM Dual 4 Gb FC Dual GbE HBA, Emulex Installation Guide

xxvi Sun StorageTek Dual 4 Gb FC Dual GbE HBA, Emulex Installation Guide • July 2008 Third-Party Web Sites Sun is not responsible for the availability of third-party web sites mentioned in thisdocument. Sun does not endorse and is not responsible or liable for any content,advertising, products, or o...

Page 27 - HBA Overview; “Kit Contents” on page 1; Kit Contents; Sun StorageTek Dual 4 Gb FC Dual GbE HBA; HBA Features and Specifications

1 C H A P T E R 1 HBA Overview This chapter provides a basic overview of the Sun StorageTek Dual 4 Gb FC DualGbE HBA, Emulex (referred to as Sun StorageTek Dual 4 Gb FC Dual GbE HBA inthis document), which uses Emulex technology. This chapter also describes thevarious operating systems, host platfor...

Page 29 - The HBA requires the OS and technology levels listed in

Chapter 1 HBA Overview 3 Operating System and TechnologyRequirements The HBA requires the OS and technology levels listed in TABLE 1-2 . Maximum FC cable length 1 Gbps: 1000 meters using 50/125 µ m core OM3 fiber 500 meters using 50/125 µ m core OM2 fiber 300 meters using 50/125 µ m core OM1 fiber 3...

Page 30 - System Interoperability; “Host Platform Support” on page 5

4 Sun StorageTek Dual 4 Gb FC Dual GbE HBA, Emulex Installation Guide • July 2008 System Interoperability This section provides information about selected platforms and storage that arecompatible with the heterogeneous FC network design of the HBA. This sectioncontains the following topics: ■ “Host ...

Page 31 - Host Platform Support; “Array Support” on page 5; Array Support; The HBA is supported by the following arrays:

Chapter 1 HBA Overview 5 Host Platform Support The HBA is supported by the platforms and operating systems listed in TABLE 1-3 . The system must have an available ExpressModule slot in which you can install theHBA. Storage Support This section lists the arrays and tape storage supported by the HBA. ...

Page 32 - Tape Storage Support; Switch Support

6 Sun StorageTek Dual 4 Gb FC Dual GbE HBA, Emulex Installation Guide • July 2008 Tape Storage Support The HBA is supported by the following tape storage: ■ Sun StorageTek SL48 tape library ■ Sun StorageTek SL24 tape autoloader ■ Sun StorageTek L8500 modular library ■ Sun StorageTek L1500 modular li...

Page 33 - Environmental Requirements

Chapter 1 HBA Overview 7 ■ Cisco MDS 9509 multilayer director ■ Cisco MDS 9513 multilayer director ■ QLogic® SANbox 9000 stackable chassis FC switch series ■ QLogic SANbox 5600 switch ■ QLogic SANbox 5602 switch The HBA is supported by all 1-Gb Ethernet switches. Software Support The HBA is supporte...

Page 35 - Hardware Installation and Removal; This chapter contains the following topics:; Damage to the HBA can occur as the result of careless handling or

9 C H A P T E R 2 Hardware Installation and Removal This chapter describes the tasks required to install and remove the HBA. Refer toyour system installation or service manual for detailed instructions. This chapter contains the following topics: ■ “Observing ESD and Handling Precautions” on page 9 ...

Page 36 - Installing the Hardware; To Install the HBA; ExpressModule slot in which to install the HBA.

10 Sun StorageTek Dual 4 Gb FC Dual GbE HBA, Emulex Installation Guide • July 2008 ■ Place the HBA on a properly grounded antistatic work surface pad when it is outof its protective antistatic bag. Installing the Hardware The hardware installation process involves the following general steps, descri...

Page 38 - To Connect the Optical Cable; Connect the fiber-optic cable to an LC connector on the HBA.

12 Sun StorageTek Dual 4 Gb FC Dual GbE HBA, Emulex Installation Guide • July 2008 ▼ To Connect the Optical Cable Note – The HBA does not allow normal data transmission on an optical link unless it is connected to another similar or compatible Fibre Channel (FC) product (that is,multimode to multimo...

Page 39 - Connect the other end of the cable to the FC device.

Chapter 2 Hardware Installation and Removal 13 FIGURE 2-2 Connecting the Cables 2. Connect the other end of the cable to the FC device. After the optical cable is connected to the HBA, you are ready to connect theEthernet cable(s). TABLE 2-2 Cables Shown in FIGURE 2-2 Cable Description Orange Fiber-...

Page 40 - To Connect the Ethernet Cable; Connect the ethernet cable to RJ-45 connectors on the HBA (see; “Configuring the; To Apply Power; Verify that the HBA is securely installed in the system.; summarizes LED indicator combinations. Refer to

14 Sun StorageTek Dual 4 Gb FC Dual GbE HBA, Emulex Installation Guide • July 2008 ▼ To Connect the Ethernet Cable Use high-quality Ethernet cable, category 5e or category 6, that adheres to thespecifications in TABLE 2-3 . 1. Connect the ethernet cable to RJ-45 connectors on the HBA (see FIGURE 2-2...

Page 41 - Observe the LEDs status for the Ethernet connection as shown in

Chapter 2 Hardware Installation and Removal 15 6. Observe the LEDs status for the Ethernet connection as shown in TABLE 2-5 . TABLE 2-5 summarizes LED indicator combinations. Refer to FIGURE 2-3 to determine the location of the LEDs. Each Ethernet port has a corresponding set ofLEDs that provide a v...

Page 43 - Testing the Installation; This section contains the following topics:; To Verify Proper Installation (for the Solaris OS); command to verify proper HBA installation.; configure; command to configure the HBA.; To Verify Attached Storage (for the Solaris OS); command to verify attached storage.; cfgadm

Chapter 2 Hardware Installation and Removal 17 Testing the Installation This section contains the following topics: ■ “To Verify Proper Installation (for the Solaris OS)” on page 17 ■ “To Verify Attached Storage (for the Solaris OS)” on page 17 ▼ To Verify Proper Installation (for the Solaris OS) 1....

Page 44 - Power LED indicator status is shown in; button near the bottom of the HBA front panel (see

18 Sun StorageTek Dual 4 Gb FC Dual GbE HBA, Emulex Installation Guide • July 2008 2. If an HBA is shown as unconfigured, use the cfgadm -c configure command to configure it. Configuring the HBA for Hot-PlugOperation 1. Locate the green Power LED indicator near the bottom of the HBA front panel (see...

Page 45 - Removing the Hardware; or preparing the HBA for hot-plug removal with one of the following:; The HBA Attention button

Chapter 2 Hardware Installation and Removal 19 Removing the Hardware The following procedures describe how to remove the HBA. Refer to your systeminstallation or service manual for detailed HBA removal instructions. The hardware removal process involves the following general steps: 1. Either halting...

Page 46 - command to identify the HBA to be removed.; cfgadm -c unconfigure; command to unconfigure the attachment; To Remove the HBA Hardware; You can now remove the HBA.

20 Sun StorageTek Dual 4 Gb FC Dual GbE HBA, Emulex Installation Guide • July 2008 1. Use the cfgadm command to identify the HBA to be removed. 2. Use the cfgadm -c unconfigure command to unconfigure the attachment point ID ( Ap_Id ) for the HBA. 3. Use the cfgadm -c disconnect command to prepare th...

Page 47 - Driver Software for the Solaris OS; Solaris Diagnostic Support; The emlxtest utility supports the following functions:

21 C H A P T E R 3 HBA Software Installation After you have completed the hardware installation and powered on the computer,follow the instructions listed in this chapter for your operating system to install theHBA driver and any other utilities required for the installation. This chapter contains t...

Page 48 - To Install the HBA Software for the Linux OS; Go to the Emulex support site for Sun Microsystems at:

22 Sun StorageTek Dual 4 Gb FC Dual GbE HBA, Emulex Installation Guide • July 2008 ■ Self-test ■ Loopback tests ■ External ■ Internal, single-bit ■ Internal, 10-bit ■ Mailbox Installing Software for the Red Hat andSUSE Linux OSes No updates are required to support the HBA on minimum supported versio...

Page 50 - Configuration and Diagnostic Utilities; HBAnywhere

24 Sun StorageTek Dual 4 Gb FC Dual GbE HBA, Emulex Installation Guide • July 2008 ▼ To Install the Software for the Windows Server2003 OS 1. Go to the Emulex support site for Sun Microsystems at: http://www.emulex.com/sun/support/em-e11000.jsp 2. Locate the driver section for Windows. 3. Download t...

Page 51 - Known Issues; Workaround

25 C H A P T E R 4 Known Issues This chapter contains the latest supplementary information for the precedingchapters in this guide. There are no known issues with this release. This chapter contains the following topics: ■ “Cannot Detect the HBA on the Sun Blade T6300 System (6680542)” on page 25 ■ ...

Page 52 - PEM) on the system might not come; - Reboot the system again, which enables the PEM service to come; The FCode version is not displayed when you use the; - You can verify the FCode version at the

26 Sun StorageTek Dual 4 Gb FC Dual GbE HBA, Emulex Installation Guide • July 2008 The PEM Might Not Come Online on a SunBlade T6300 or T6320 System (6683536) In rare circumstances, after a Sun Blade T6300 or T6320 system has gone throughseveral reboots, the Pluggable Express Module ( PEM) on the sy...