Sun Microsystems PCI-X - Manuals

vii Figures FIGURE 3-1 Removing the Bracket Screws 15 FIGURE 3-2 Installing the Single and Dual Port HBAs 16 FIGURE 3-3 Attaching the Optical Cable 17

ix Tables TABLE 1-1 Single and Dual Port HBA Features 2 TABLE 2-1 Sun Solaris 8, 9, and 10; Red Hat Enterprise Linux and SuSE Enterprise Linux; and Windows2000 and Windows Server 2003 Host Platform Support 6 TABLE 3-1 Optical Cable Specifications 17 TABLE 3-2 LED Indicator Status Definitions 18 TABL...

xi Preface This manual describes how to install, configure, and test the Sun StorageTek™Enterprise PCI-X 4 Gb Fibre Channel (FC) Single or Dual Port Emulex Host BusAdapter (HBA). This document is written for technicians, system administrators,authorized service providers (ASPs), and users who have a...

xii Sun StorageTek Enterprise PCI-X 4 Gb FC Single & Dual Port Emulex HBA Installation & Interop Guide • January 2007 Using UNIX Commands This document does not contain information about basic UNIX ® commands and procedures such as shutting down the system, booting the system, and configurin...

Preface xiii Typographic Conventions Related Documentation The following documents are available at: http://www.sun.com/products-n- solutions/hardware/docs/Network_Storage_Solutions/SAN/san_software/ index.html and http://docs.sun.com/app/docs/doc/819-0139. Typeface * * The settings on your browser ...

xiv Sun StorageTek Enterprise PCI-X 4 Gb FC Single & Dual Port Emulex HBA Installation & Interop Guide • January 2007 Documentation, Support, and Training Third-Party Web Sites Sun is not responsible for the availability of third-party web sites mentioned in thisdocument. Sun does not endors...

1 C H A P T E R 1 Product Overview This chapter provides a basic overview of the Sun StorageTek Enterprise PCI-X 4 GbFC Single and Dual Port Emulex HBAs (henceforth referred to as single and dual port HBAs ). It contains the following topics: ■ “Single and Dual Port HBA Features” on page 2 ■ “Minimu...

2 Sun StorageTek Enterprise PCI-X 4 Gb FC Single & Dual Port Emulex HBA Installation & Interop Guide • January 2007 Single and Dual Port HBA Features The single and dual port HBAs consist of a single-slot PCI-X 2.0 bus expansionboard that interfaces a 64-bit PCI bus to one or two Fibre Chann...

4 Sun StorageTek Enterprise PCI-X 4 Gb FC Single & Dual Port Emulex HBA Installation & Interop Guide • January 2007 Supported Operating Systems You can use the single and dual port HBAs with the following operating systems: ■ Solaris 8, 9, and 10 Operating Systems To use the single and dual ...

5 C H A P T E R 2 Supported System Configurations This chapter describes the operating systems, host platforms, storage, andinfrastructure configurations that support the Sun StorageTek Enterprise PCI-X 4 GbFC Single and Dual Port Emulex HBAs (henceforth referred to as single and dual port HBAs ). I...

6 Sun StorageTek Enterprise PCI-X 4 Gb FC Single & Dual Port Emulex HBA Installation & Interop Guide • January 2007 Basic Interoperability This section provides information about platform, storage, and switch compatibilitypermitting a heterogeneous Fibre Channel network design with the singl...

Chapter 2 Suppor ted System Configurations 7 Storage System Support The single and dual port HBAs support the storage systems are listed below. ■ Sun StorEdge™ 3510 and 3511 FC arrays ■ Sun StorEdge 6020, 6120, and 6320 arrays ■ Sun StorEdge 6130 array ■ Sun StorEdge 6920 system ■ Sun StorEdge L25 a...

8 Sun StorageTek Enterprise PCI-X 4 Gb FC Single & Dual Port Emulex HBA Installation & Interop Guide • January 2007 Solaris 8, 9, and 10 Operating SystemRequirements This section contains information about using the single and dual port HBAs withthe Solaris OS. Minimum Operating System Level...

Chapter 2 Suppor ted System Configurations 9 Red Hat Enterprise Linux and SuSELinux Enterprise Server OperatingSystem Requirements This section contains information about using the single and dual port HBAs in RedHat Enterprise Linux and SuSE Linux Enterprise operating systems. Minimum OS Levels ■ R...

10 Sun StorageTek Enterprise PCI-X 4 Gb FC Single & Dual Port Emulex HBA Installation & Interop Guide • January 2007 Windows 2000 and Windows Server 2003Operating System Requirements This section contains information about using the single and dual port HBAs inWindows 2000 and Windows Server...

13 C H A P T E R 3 Hardware Installation This chapter provides instructions for installing the Sun StorageTek Enterprise PCI-X4 Gb FC Single and Dual Port Emulex HBAs (henceforth referred to as single and dual port HBAs ) in your system. It contains the following topics: ■ “To Verify the Packaging C...

14 Sun StorageTek Enterprise PCI-X 4 Gb FC Single & Dual Port Emulex HBA Installation & Interop Guide • January 2007 ▼ To Verify the Packaging Contents ● Confirm that the single or dual port HBAs are shipped with the followingitems: ■ Sun StorageTek Enterprise PCI-X 4Gb FC Single or Dual Por...

Chapter 3 Hardware Installation 15 FIGURE 3-1 Removing the Bracket Screws b. Remove the bracket and store it for future use. c. Align the new mounting bracket tabs with the holes in the HBA. Note – Be careful not to push the bracket past the transceiver housing’s grounding tabs. Ensure that the LEDs...

16 Sun StorageTek Enterprise PCI-X 4 Gb FC Single & Dual Port Emulex HBA Installation & Interop Guide • January 2007 FIGURE 3-2 Installing the Single and Dual Port HBAs Note – FIGURE 3-2 is a typical installation, which may differ from your installation. ▼ To Attach the Optical Cable Note – ...

Chapter 3 Hardware Installation 17 Follow these steps when attaching the optical cable: 1. Connect the fiber-optic cable to an LC connector on the dual port HBA ( see FIGURE 3-3 ). FIGURE 3-3 Attaching the Optical Cable 2. Connect the other end of the cable to the Fibre Channel device. After the opt...

18 Sun StorageTek Enterprise PCI-X 4 Gb FC Single & Dual Port Emulex HBA Installation & Interop Guide • January 2007 ▼ To Apply Power 1. Verify that the HBA is securely installed in the system. 2. Verify that the correct optical cable is attached. 3. Plug in and power on the system. 4. Obser...

Chapter 3 Hardware Installation 19 ▼ To Verify Proper Installation in SPARCPlatforms 1. Enter the show-devs command at the ok prompt to list the installed devices. The single and dual port HBAs can be identified in the output containing the SUNW,emlxs@n and SUNW,emlxs@n,1 node names, where n is usua...

Chapter 3 Hardware Installation 21 ▼ To Verify the Attached Storage ● If online storage is connected to the HBA installed in a SPARC system, use the apply show-children command to list the attached storage. In the example that follows, a storage JBOD has twelve targets attached to one portof the dua...

22 Sun StorageTek Enterprise PCI-X 4 Gb FC Single & Dual Port Emulex HBA Installation & Interop Guide • January 2007 ▼ To Verify Proper Installation in x64 BasedSystems ● Follow the instructions in the BIOS documentation provided with yoursystem. Service Contact Information If you need help ...

23 C H A P T E R 4 Software Installation After you have completed the hardware installation and powered on the computer,follow the instructions listed for your operating system to install the single and dualport HBA driver and any other utilities required for your installation. The followingsections...

24 Sun StorageTek Enterprise PCI-X 4 Gb FC Single & Dual Port Emulex HBA Installation & Interop Guide • January 2007 Installing the HBA Driver With SolarisOperating Systems You must first install the latest available patch clusters for your Solaris OS. This section contains the following top...

Chapter 4 Software Installation 25 The packages and patches are available either bundled as a script posted in the SunDownload Center (SDLC), or as individual packages and patches. Sun recommendsusing the install_it script, see “To Run An install_it Script Installation” on page 25 . To install the p...

26 Sun StorageTek Enterprise PCI-X 4 Gb FC Single & Dual Port Emulex HBA Installation & Interop Guide • January 2007 ▼ To Do A Manual Installation Optionally, for Solaris 8 and 9, if you do not want to use the install_it script, install the driver by adding the following packages and then pa...

Chapter 4 Software Installation 27 1. Go to http://sunsolve.sun.com . The SunSolve Online license agreement page displays. 2. Accept the License Agreement. The SunSolve Online page displays. 3. Under Patches and Updates, click PatchFinder. 4. Download the appropriate patches for your system from TAB...

28 Sun StorageTek Enterprise PCI-X 4 Gb FC Single & Dual Port Emulex HBA Installation & Interop Guide • January 2007 Downloading HBA Driver Packages and Patchesfor Solaris 10 for SPARC or x64/x86 There is no install_it script available to install the drivers for Solaris 10. If you areusing t...

Chapter 4 Software Installation 29 ▼ To Download the Patches Perform the following steps to download the Solaris 10 patches. 1. Go to http://sunsolve.sun.com . The SunSolve Online license agreement page displays. 2. Accept the License Agreement. The SunSolve Online page displays. 3. Under Patches an...

30 Sun StorageTek Enterprise PCI-X 4 Gb FC Single & Dual Port Emulex HBA Installation & Interop Guide • January 2007 Installing the HBA Driver With Red Hatand SuSE Operating Systems The Red Hat Enterprise Linux (RHEL) 3 and 4 and the SuSE Linux Enterprise Server(SLES) 8 and 9 operating syste...

Chapter 4 Software Installation 31 Red Hat and SuSE OS Diagnostic Support Diagnostic support is provided by the Emulex lputil and HBAnyware utilities. They support the following functions: ■ List adapters ■ Adapter information ■ Firmware maintenance ■ Reset adapters To verify the installation, follo...

32 Sun StorageTek Enterprise PCI-X 4 Gb FC Single & Dual Port Emulex HBA Installation & Interop Guide • January 2007 Installing the HBA Driver WithWindows 2000 or Windows Server 2003Operating Systems The Windows 2000 and Windows Server 2003 operating systems are supported onthe single and du...

35 A P P E N D I X A Declaration of Conformity,Regulatory Compliance, and SafetyStatements This appendix contains the following information that applies to the Sun StorageTekEnterprise 4 Gb Fibre Channel Single and Dual Port Host Bus Adapter: ■ “Declaration of Conformity” on page 37 ■ “Regulatory Co...

37 Declaration of Conformity EMC USA—FCC Class A This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This equipment may not cause harmful interference.2. This equipment must accept any interference that may cause undesired operation. Europea...

39 Regulatory Compliance Statements Your Sun product is marked to indicate its compliance class: • Federal Communications Commission (FCC) — USA • Industry Canada Equipment Standard for Digital Equipment (ICES-003) — Canada • Voluntary Control Council for Interference (VCCI) — Japan • Bureau of Stan...

Regulatory Compliance Statements 41 BSMI Class A Notice The following statement is applicable to products shipped to Taiwan and marked as Class A on the product compliancelabel. GOST-R Certification Mark D33012

43 Safety Agency ComplianceStatement Read this section before beginning any procedure. Thefollowing text provides safety precautions to follow wheninstalling a Sun Microsystems product. Safety Precautions For your protection, observe the following safetyprecautions when setting up your equipment: ■ ...

Safety Agency Compliance Statement 45 Rack System Warning The following warnings apply to Racks and Rack Mountedsystems. Caution – For safety, equipment should always be loaded from the bottom up. That is,install the equipment that will be mounted inthe lowest part of the rack first, then the nexthi...

Safety Agency Compliance Statement 47 Attention – Tous les cordons d'alimentation ne présentent pas les mêmes caractéristiquesélectriques. Les cordons d'alimentation àusage domestique ne sont pas protégés contreles surtensions et ne sont pas conçus pour êtreutilisés avec des ordinateurs. N'utilisez ...

48 Sun StorageTek Enterprise PCI-X 4 Gb FC Single & Dual Por t Emulex HBA Installation & Interop Guide • January 2007 Attention – Afin d'éviter que le rack ne penche pendant l'installation du matériel, tirezla barre anti-basculement du rack. Attention – Pour éviter des températures de foncti...

Safety Agency Compliance Statement 49 Je nach Netzschaltertyp an Ihrem Gerät kann eines derfolgenden Symbole verwendet werden: Ein – Versorgt das System mit Wechselstrom. Aus– Unterbricht die Wechselstromzufuhr zum Gerät. Wartezustand – Der Ein-/Standby-Netz- schalter befindet sich in der Standby-Po...

Safety Agency Compliance Statement 51 Hinweis zur Laser-Konformität Sun-Produkte, die die Laser-Technologie verwenden,entsprechen den Laser-Anforderungen der Klasse 1. CD- und DVD-Geräte Die folgende Warnung gilt für CD-, DVD- und andereoptische Geräte: Achtung – Die hier nicht aufgeführte Verwendun...

52 Sun StorageTek Enterprise PCI-X 4 Gb FC Single & Dual Por t Emulex HBA Installation & Interop Guide • January 2007 Nivel de ruido Declared noise emissions in accordance with ISO 9296,A-weighted, operating and idling: Cumplimiento de la normativa para instalaciones SELV Las condiciones de ...

Safety Agency Compliance Statement 53 Cubierta de la unidad del sistema Debe extraer la cubierta de la unidad del sistemainformático Sun para instalar tarjetas, memoria odispositivos de almacenamiento internos. Vuelva a colocarla cubierta antes de encender el sistema informático. Precaución – No pon...

54 Sun StorageTek Enterprise PCI-X 4 Gb FC Single & Dual Por t Emulex HBA Installation & Interop Guide • January 2007 Danmark Advarsel! – Litiumbatteri — Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kunske med batteri af samme fabrikat og type.Levér det brugte batteri tilbage til...